From: Shyam Saini Date: Tue, 4 Jun 2019 07:50:37 +0000 (+0530) Subject: configs/nanopc_t4: new defconfig X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=c23895f06e0988319a1959764a402b57bc21ffaf;p=buildroot.git configs/nanopc_t4: new defconfig This initial support includes: Linux 5.1 Custom U-Boot Arm Trusted Firmware v2.0 Buildroot default packages Signed-off-by: Shyam Saini [Thomas: - Use the headers from the kernel, by using BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y - Use the default ext2 rootfs size] Signed-off-by: Thomas Petazzoni --- diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 770c72a37d..3e37580e63 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -210,6 +210,7 @@ mx53loco_defconfig: { extends: .defconfig } mx6cubox_defconfig: { extends: .defconfig } mx6sx_udoo_neo_defconfig: { extends: .defconfig } mx6udoo_defconfig: { extends: .defconfig } +nanopc_t4_defconfig: { extends: .defconfig } nanopi_m1_defconfig: { extends: .defconfig } nanopi_m1_plus_defconfig: { extends: .defconfig } nanopi_neo_defconfig: { extends: .defconfig } diff --git a/DEVELOPERS b/DEVELOPERS index 593c47b498..c6b21559e5 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2065,9 +2065,11 @@ F: package/wolfssl/ N: Shyam Saini F: board/friendlyarm/nanopi-neo4/ +F: board/friendlyarm/nanopc-t4/ F: board/radxa/rock-pi4/ F: board/pine64/rockpro64/ F: configs/nanopi_neo4_defconfig +F: configs/nanopc_t4_defconfig F: configs/pine64_rockpro64_defconfig F: configs/radxa_rock_pi4_defconfig diff --git a/board/friendlyarm/nanopc-t4/extlinux.conf b/board/friendlyarm/nanopc-t4/extlinux.conf new file mode 100644 index 0000000000..b09c20db84 --- /dev/null +++ b/board/friendlyarm/nanopc-t4/extlinux.conf @@ -0,0 +1,4 @@ +label NanoPc T4 + kernel /boot/Image + devicetree /boot/rk3399-nanopc-t4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait diff --git a/board/friendlyarm/nanopc-t4/genimage.cfg b/board/friendlyarm/nanopc-t4/genimage.cfg new file mode 100644 index 0000000000..6404b0ad3b --- /dev/null +++ b/board/friendlyarm/nanopc-t4/genimage.cfg @@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-spl-dtb { + in-partition-table = "no" + image = "u-boot-spl-dtb.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + size = 30M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/friendlyarm/nanopc-t4/post-build.sh b/board/friendlyarm/nanopc-t4/post-build.sh new file mode 100755 index 0000000000..9b0c4ecc83 --- /dev/null +++ b/board/friendlyarm/nanopc-t4/post-build.sh @@ -0,0 +1,8 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-spl-dtb.bin $BINARIES_DIR/u-boot-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf diff --git a/board/friendlyarm/nanopc-t4/readme.txt b/board/friendlyarm/nanopc-t4/readme.txt new file mode 100644 index 0000000000..dc2cd8444b --- /dev/null +++ b/board/friendlyarm/nanopc-t4/readme.txt @@ -0,0 +1,49 @@ +Intro +===== + +NanoPc T4 is a RK3399 SoC based ARM64 board. + +Official Wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T4 + +Build +===== + +Run NanoPc T4 configuration + + $ make nanopc_t4_defconfig + +To build, run make comamnd. + + $ make + +Files created in output directory +================================= + +output/images/ + +├── bl31.bin +├── bl31.elf +├── Image +├── rk3399-nanopc-t4.dtb +├── rootfs.ext2 +├── rootfs.ext4 -> rootfs.ext2 +├── rootfs.tar +├── sdcard.img +├── u-boot.bin +├── u-boot.itb +├── u-boot-spl-dtb.bin +└── u-boot-spl-dtb.img + +Creating bootable SD card: +========================= + +Simply invoke (as root) + + # dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device + +Serial console +-------------- + +Baudrate for this board is 1500000 diff --git a/configs/nanopc_t4_defconfig b/configs/nanopc_t4_defconfig new file mode 100644 index 0000000000..f6aaf75531 --- /dev/null +++ b/configs/nanopc_t4_defconfig @@ -0,0 +1,54 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers same as kernel, a 5.1 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="980ca75ae0438b4a1847d044605c492f3c844f88" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopc-t4-rk3399" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.1" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopc-t4" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="NanoPc T4" +BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPc T4!" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopc-t4/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopc-t4/post-build.sh"