From: Fred Fish Date: Thu, 30 Jan 1997 20:56:33 +0000 (+0000) Subject: * tic80.h: Change all the OPERAND defines to use the form (1 << X) X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=c2717a801fc15ec6c37b68fb84b7091c4f747be6;p=binutils-gdb.git * tic80.h: Change all the OPERAND defines to use the form (1 << X) rather than a constant that is 2**X. Reorder them to put bits for operands that have symbolic names in the upper bits, so they can be packed into an int where the lower bits contain the value that corresponds to that symbolic name. (predefined_symbo): Add struct. (tic80_predefined_symbols): Declare array of translations. (tic80_num_predefined_symbols): Declare size of that array. (tic80_value_to_symbol): Declare function. (tic80_symbol_to_value): Declare function. --- diff --git a/include/opcode/ChangeLog b/include/opcode/ChangeLog index 2c69a0c74f3..64684cfac81 100644 --- a/include/opcode/ChangeLog +++ b/include/opcode/ChangeLog @@ -1,3 +1,18 @@ +start-sanitize-tic80 +Thu Jan 30 13:46:18 1997 Fred Fish + + * tic80.h: Change all the OPERAND defines to use the form (1 << X) + rather than a constant that is 2**X. Reorder them to put bits for + operands that have symbolic names in the upper bits, so they can + be packed into an int where the lower bits contain the value that + corresponds to that symbolic name. + (predefined_symbo): Add struct. + (tic80_predefined_symbols): Declare array of translations. + (tic80_num_predefined_symbols): Declare size of that array. + (tic80_value_to_symbol): Declare function. + (tic80_symbol_to_value): Declare function. + +end-sanitize-tic80 Wed Jan 29 09:37:25 1997 Jeffrey A Law (law@cygnus.com) * mn10200.h (MN10200_OPERAND_RELAX): Define. diff --git a/include/opcode/tic80.h b/include/opcode/tic80.h index 36774383e36..4bab83e4e9d 100644 --- a/include/opcode/tic80.h +++ b/include/opcode/tic80.h @@ -98,7 +98,7 @@ struct tic80_operand If it is NULL, compute op = ((i) >> o->shift) & ((1 << o->bits) - 1); - if ((o->flags & PPC_OPERAND_SIGNED) != 0 + if ((o->flags & TIC80_OPERAND_SIGNED) != 0 && (op & (1 << (o->bits - 1))) != 0) op -= 1 << o->bits; (i is the instruction, o is a pointer to this structure, and op @@ -123,71 +123,138 @@ struct tic80_operand extern const struct tic80_operand tic80_operands[]; -/* Values defined for the flags field of a struct tic80_operand. */ + +/* Values defined for the flags field of a struct tic80_operand. + + Note that flags for all predefined symbols, such as the general purpose + registers (ex: r10), control registers (ex: FPST), condition codes (ex: + eq0.b), bit numbers (ex: gt.b), etc are large enough that they can be + or'd into an int where the lower bits contain the actual numeric value + that correponds to this predefined symbol. This way a single int can + contain both the value of the symbol and it's type. + */ + +/* This operand must be an even register number. Floating point numbers + for example are stored in even/odd register pairs. */ + +#define TIC80_OPERAND_EVEN (1 << 0) + +/* This operand must be an odd register number and must be one greater than + the register number of the previous operand. I.E. the second register in + an even/odd register pair. */ + +#define TIC80_OPERAND_ODD (1 << 1) /* This operand takes signed values. */ -#define TIC80_OPERAND_SIGNED (01) -/* The next operand should be wrapped in parentheses rather than separated - from this one by a comma. This is used for various instructions, like - the load and store instructions, which want their operands to look like - "displacement(reg)" */ -#define TIC80_OPERAND_PARENS (02) +#define TIC80_OPERAND_SIGNED (1 << 2) + +/* This operand may be either a predefined constant name or a numeric value. + An example would be a condition code like "eq0.b" which has the numeric + value 0x2. */ -/* This operand is a bit number and may use symbolic names such as "eq.b", - "or.f", etc. */ -#define TIC80_OPERAND_BITNUM (04) +#define TIC80_OPERAND_NUM (1 << 3) -/* This operand names a register. The disassembler uses this to print - register names with a leading 'r'. */ -#define TIC80_OPERAND_GPR (010) +/* This operand should be wrapped in parentheses rather than separated + from the previous one by a comma. This is used for various + instructions, like the load and store instructions, which want + their operands to look like "displacement(reg)" */ -/* This operand names a floating point accumulator register. The disassembler - prints these with a leading 'a'. */ -#define TIC80_OPERAND_FPA (020) +#define TIC80_OPERAND_PARENS (1 << 4) /* This operand is a PC relative branch offset. The disassembler prints these symbolically if possible. Note that the offsets are taken as word offsets. */ -#define TIC80_OPERAND_PCREL (040) + +#define TIC80_OPERAND_PCREL (1 << 5) /* This flag is a hint to the disassembler for using hex as the prefered printing format, even for small positive or negative immediate values. Normally values in the range -999 to 999 are printed as signed decimal values and other values are printed in hex. */ -#define TIC80_OPERAND_BITFIELD (0100) - -/* This operand is a condition code, which may be given symbolically as - "eq0.b", "ne0.w", etc. */ -#define TIC80_OPERAND_CC (0200) -/* This operand is a control register number, or may also be given - symbolically as "EIP", "EPC", etc. */ -#define TIC80_OPERAND_CR (0400) +#define TIC80_OPERAND_BITFIELD (1 << 6) /* This operand may have a ":m" modifier specified by bit 17 in a short immediate form instruction. */ -#define TIC80_OPERAND_M_SI (01000) + +#define TIC80_OPERAND_M_SI (1 << 7) /* This operand may have a ":m" modifier specified by bit 15 in a long immediate or register form instruction. */ -#define TIC80_OPERAND_M_LI (02000) + +#define TIC80_OPERAND_M_LI (1 << 8) /* This operand may have a ":s" modifier specified in bit 11 in a long immediate or register form instruction. */ -#define TIC80_OPERAND_SCALED (04000) + +#define TIC80_OPERAND_SCALED (1 << 9) /* This operand is a floating point value */ -#define TIC80_OPERAND_FLOAT (010000) + +#define TIC80_OPERAND_FLOAT (1 << 10) /* This operand is an byte offset from a base relocation. The lower two bits of the final relocated address are ignored when the value is written to the program counter. */ -#define TIC80_OPERAND_BASEREL (020000) +#define TIC80_OPERAND_BASEREL (1 << 11) + +/* This operand is one of the 32 general purpose registers. + The disassembler prints these with a leading 'r'. */ + +#define TIC80_OPERAND_GPR (1 << 27) + +/* This operand is a floating point accumulator register. + The disassembler prints these with a leading 'a'. */ + +#define TIC80_OPERAND_FPA ( 1 << 28) + +/* This operand is a control register number, either numeric or + symbolic (like "EIF", "EPC", etc). + The disassembler prints these symbolically. */ + +#define TIC80_OPERAND_CR (1 << 29) + +/* This operand is a condition code, either numeric or + symbolic (like "eq0.b", "ne0.w", etc). + The disassembler prints these symbolically. */ + +#define TIC80_OPERAND_CC (1 << 30) + +/* This operand is a bit number, either numeric or + symbolic (like "eq.b", "or.f", etc). + The disassembler prints these symbolically. */ + +#define TIC80_OPERAND_BITNUM (1 << 31) + +/* This mask is used to strip operand bits from an int that contains + both operand bits and a numeric value in the lsbs. */ + +#define TIC80_OPERAND_MASK (OPERAND_GPR | OPERAND_FPA | OPERAND_CR | OPERAND_CC | OPERAND_BITNUM) + + /* Flag bits for the struct tic80_opcode flags field. */ #define TIC80_VECTOR 01 /* Is a vector instruction */ #define TIC80_NO_R0_DEST 02 /* Register r0 cannot be a destination register */ + +/* The opcodes library contains a table that allows translation from predefined + symbol names to numeric values, and vice versa. */ + +/* Structure to hold information about predefined symbols. */ + +struct predefined_symbol +{ + char *name; /* name to recognize */ + int value; +}; + +extern const struct predefined_symbol tic80_predefined_symbols[]; /* Translation array */ +extern const int tic80_num_predefined_symbols; /* How many members in the array */ + +const char *tic80_value_to_symbol PARAMS ((int val, int class)); /* Translate value to symbolic name */ +int tic80_symbol_to_value PARAMS ((char *name)); /* Translate symbolic name to value */ + #endif /* TIC80_H */