From: Andrey Miroshnikov Date: Sat, 1 Oct 2022 08:42:55 +0000 (+0000) Subject: feat(iomux, pinmux, stage2): Change terminology from 'bank' to 'mux'/'port' X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=c4534b6fb37e1b11b33da03c6ce7e556096a89bd;p=pinmux.git feat(iomux, pinmux, stage2): Change terminology from 'bank' to 'mux'/'port' To improve clarity, the word 'bank' has been reserved for banks of pins on the chip. Thus peripherals are now connected to different 'ports' of the mux, and have a 'mux' setting. --- diff --git a/src/spec/iomux.py b/src/spec/iomux.py index d69e94a..90a7158 100644 --- a/src/spec/iomux.py +++ b/src/spec/iomux.py @@ -28,23 +28,23 @@ io_layout = (("i", 1), ("o", 1) ) -# This block produces an N-to-1 mux with N 3-bit bank ports and one pad port. -# The bank ports are intended to be wired to peripheral functions, +# This block produces an N-to-1 mux with N 3-bit periph ports and one pad port. +# The peripheral ports are intended to be wired to peripheral functions, # while the pad port will connect to the I/O pad. -# Each port has o/oe/i signals, and the bank signal is used to select -# between the bank ports. +# Peripheral and output ports have o/oe/i signals, and the port signal is used +# to select between the peripheral ports. class IOMuxBlockSingle(Elaboratable): - def __init__(self, n_banks=4): + def __init__(self, n_ports=4): print("1-bit IO Mux Block") - self.n_banks = n_banks - self.bank = Signal(log2_int(self.n_banks)) + self.n_ports = n_ports + self.port = Signal(log2_int(self.n_ports)) temp = [] - for i in range(self.n_banks): - name = "bank%d" % i + for i in range(self.n_ports): + name = "port%d" % i temp.append(Record(name=name, layout=io_layout)) - self.bank_ports = Array(temp) + self.periph_ports = Array(temp) self.out_port = Record(name="IO", layout=io_layout) @@ -52,97 +52,97 @@ class IOMuxBlockSingle(Elaboratable): m = Module() comb, sync = m.d.comb, m.d.sync - bank = self.bank - bank_ports = self.bank_ports + port = self.port + periph_ports = self.periph_ports out_port = self.out_port # Connect IO Pad output port to one of the peripheral IOs # Connect peripheral inputs to the IO pad input - comb += self.out_port.o.eq(self.bank_ports[bank].o) - comb += self.out_port.oe.eq(self.bank_ports[bank].oe) + comb += self.out_port.o.eq(self.periph_ports[port].o) + comb += self.out_port.oe.eq(self.periph_ports[port].oe) - comb += self.bank_ports[bank].i.eq(self.out_port.i) + comb += self.periph_ports[port].i.eq(self.out_port.i) return m - def connect_bank_to_io(self, domain, bank_arg): - domain += self.out_port.o.eq(self.bank_ports[bank_arg].o) - domain += self.out_port.oe.eq(self.bank_ports[bank_arg].oe) - domain += self.bank_ports[bank_arg].i.eq(self.out_port.i) + def connect_port_to_io(self, domain, port_arg): + domain += self.out_port.o.eq(self.periph_ports[port_arg].o) + domain += self.out_port.oe.eq(self.periph_ports[port_arg].oe) + domain += self.periph_ports[port_arg].i.eq(self.out_port.i) def __iter__(self): """ Get member signals for Verilog form. """ for field in self.out_port.fields.values(): yield field - for bank in range(self.n_banks): - for field in self.bank_ports[bank].fields.values(): + for port in range(self.n_ports): + for field in self.periph_ports[port].fields.values(): yield field - yield self.bank + yield self.port def ports(self): return list(self) -# Method to test a particular bank port -# when rand_order is True, previous and consecutive banks are -# random (but NOT equal to given bank) -def test_single_bank(dut, bank, rand_order=True, delay=1e-6): +# Method to test a particular peripheral port +# when rand_order is True, previous and consecutive ports are +# random (but NOT equal to given port) +def test_single_port(dut, port, rand_order=True, delay=1e-6): if rand_order: - print("Randomising the prev and next banks") - prev_bank=bank - while(prev_bank == bank): - prev_bank = randint(0, dut.n_banks-1) - next_bank=bank - while(next_bank == bank): - next_bank = randint(0, dut.n_banks-1) + print("Randomising the prev and next ports") + prev_port=port + while(prev_port == port): + prev_port = randint(0, dut.n_ports-1) + next_port=port + while(next_port == port): + next_port = randint(0, dut.n_ports-1) else: - # Set the prev and next banks as consecutive banks - if bank == 0: - prev_bank = dut.n_banks - 1 + # Set the prev and next ports as consecutive ports + if port == 0: + prev_port = dut.n_ports - 1 else: - prev_bank = bank - 1 + prev_port = port - 1 - if bank == dut.n_banks: - next_bank = 0 + if port == dut.n_ports: + next_port = 0 else: - next_bank = bank + 1 + next_port = port + 1 - print("Prev=%d, Given=%d, Next=%d" % (prev_bank, bank, next_bank)) + print("Prev=%d, Given=%d, Next=%d" % (prev_port, port, next_port)) # Clear o/oe, delay, set port i - # Set to previous bank, delay - # Assert bank i == 0 - # Set to desired bank - # Assert bank i == 1 + # Set to previous port, delay + # Assert port i == 0 + # Set to desired port + # Assert port i == 1 # Set o/oe, delay # Assert o, oe == 1 - # Set to next bank, delay - # Assert bank i == 0 - yield dut.bank_ports[bank].o.eq(0) + # Set to next port, delay + # Assert port i == 0 + yield dut.periph_ports[port].o.eq(0) yield Delay(delay) - yield dut.bank_ports[bank].oe.eq(0) + yield dut.periph_ports[port].oe.eq(0) yield Delay(delay) yield dut.out_port.i.eq(1) yield Delay(delay) - yield dut.bank.eq(prev_bank) + yield dut.port.eq(prev_port) yield Delay(delay) - test_i = yield dut.bank_ports[bank].i + test_i = yield dut.periph_ports[port].i assert(test_i == 0) - yield dut.bank.eq(bank) + yield dut.port.eq(port) yield Delay(delay) test_o = yield dut.out_port.o test_oe = yield dut.out_port.oe - test_i = yield dut.bank_ports[bank].i + test_i = yield dut.periph_ports[port].i assert(test_o == 0) assert(test_oe == 0) assert(test_i == 1) - yield dut.bank_ports[bank].o.eq(1) + yield dut.periph_ports[port].o.eq(1) yield Delay(delay) - yield dut.bank_ports[bank].oe.eq(1) + yield dut.periph_ports[port].oe.eq(1) yield Delay(delay) test_o = yield dut.out_port.o @@ -150,30 +150,30 @@ def test_single_bank(dut, bank, rand_order=True, delay=1e-6): assert(test_o == 1) assert(test_oe == 1) - yield dut.bank.eq(next_bank) + yield dut.port.eq(next_port) yield Delay(delay) - test_i = yield dut.bank_ports[bank].i + test_i = yield dut.periph_ports[port].i assert(test_i == 0) def test_iomux(dut, rand_order=True): print("------START----------------------") - #print(dir(dut.bank_ports[0])) - #print(dut.bank_ports[0].fields) + #print(dir(dut.periph_ports[0])) + #print(dut.periph_ports[0].fields) - # Produce a test list of bank values - test_bank_vec = list(range(0, dut.n_banks)) - #print(test_bank_vec) + # Produce a test list of port values + test_port_vec = list(range(0, dut.n_ports)) + #print(test_port_vec) # Randomise for wider testing if rand_order: - shuffle(test_bank_vec) - #print(test_bank_vec) - for i in range(dut.n_banks): - yield from test_single_bank(dut, test_bank_vec[i], rand_order) + shuffle(test_port_vec) + #print(test_port_vec) + for i in range(dut.n_ports): + yield from test_single_port(dut, test_port_vec[i], rand_order) print("Finished the 1-bit IO mux block test!") -def gen_gtkw_doc(module_name, n_banks, filename): +def gen_gtkw_doc(module_name, n_ports, filename): # GTKWave doc generation style = { '': {'base': 'hex'}, @@ -184,16 +184,16 @@ def gen_gtkw_doc(module_name, n_banks, filename): # Create a trace list, each block expected to be a tuple() traces = [] - for bank in range(0, n_banks): - temp_traces = ('Bank%d' % bank, [ - ('bank%d__i' % bank, 'in'), - ('bank%d__o' % bank, 'out'), - ('bank%d__oe' % bank, 'out') + for port in range(0, n_ports): + temp_traces = ('Bank%d' % port, [ + ('port%d__i' % port, 'in'), + ('port%d__o' % port, 'out'), + ('port%d__oe' % port, 'out') ]) traces.append(temp_traces) temp_traces = ('Misc', [ - ('bank[%d:0]' % ((n_banks-1).bit_length()-1), 'in') + ('port[%d:0]' % ((n_ports-1).bit_length()-1), 'in') ]) traces.append(temp_traces) temp_traces = ('IO port to pad', [ @@ -209,8 +209,8 @@ def gen_gtkw_doc(module_name, n_banks, filename): def sim_iomux(rand_order=True): filename = "test_iomux" # Doesn't include extension - n_banks = 8 - dut = IOMuxBlockSingle(n_banks) + n_ports = 8 + dut = IOMuxBlockSingle(n_ports) vl = rtlil.convert(dut, ports=dut.ports()) with open(filename+".il", "w") as f: f.write(vl) @@ -225,7 +225,7 @@ def sim_iomux(rand_order=True): with sim_writer: sim.run() - gen_gtkw_doc("top.pinmux", dut.n_banks, filename) + gen_gtkw_doc("top.pinmux", dut.n_ports, filename) diff --git a/src/spec/pinmux.py b/src/spec/pinmux.py index 63c7f6f..295fb17 100644 --- a/src/spec/pinmux.py +++ b/src/spec/pinmux.py @@ -30,7 +30,7 @@ class PinMuxBlockSingle(Elaboratable): def __init__(self, wb_wordsize, pinspec): print("1-bit Pin Mux Block with JTAG") - self.n_banks = 4 + self.n_ports = 4 self.n_gpios = 1 self.wb_wordsize = wb_wordsize # 4 Bytes, 32-bits @@ -42,14 +42,14 @@ class PinMuxBlockSingle(Elaboratable): spec.reg_wid = self.wb_wordsize*8 temp = [] - for i in range(1, self.n_banks): + for i in range(1, self.n_ports): temp_str = "%s" % (pinspec["mux%d" % i]) temp.append(Record(name=temp_str, layout=io_layout)) self.periph_ports = Array(temp) self.pad_port = Record(name=pinspec["name"], layout=io_layout) - self.iomux = IOMuxBlockSingle(self.n_banks) + self.iomux = IOMuxBlockSingle(self.n_ports) self.gpio = SimpleGPIO(self.wb_wordsize, self.n_gpios) # This is probably easier to extend in future by bringing out WB # interface to top-level @@ -83,18 +83,18 @@ class PinMuxBlockSingle(Elaboratable): # gpio.bus.bte.eq(bus.bte) # Burst Type Extension # ] - m.d.comb += iomux.bank.eq(gpio.gpio_ports[0].bank) + m.d.comb += iomux.port.eq(gpio.gpio_ports[0].bank) - # WB GPIO always bank0 - m.d.comb += iomux.bank_ports[0].o.eq(gpio.gpio_ports[0].o) - m.d.comb += iomux.bank_ports[0].oe.eq(gpio.gpio_ports[0].oe) - m.d.comb += gpio.gpio_ports[0].i.eq(iomux.bank_ports[0].i) + # WB GPIO always port0 + m.d.comb += iomux.periph_ports[0].o.eq(gpio.gpio_ports[0].o) + m.d.comb += iomux.periph_ports[0].oe.eq(gpio.gpio_ports[0].oe) + m.d.comb += gpio.gpio_ports[0].i.eq(iomux.periph_ports[0].i) - # banks1-3 external - for bank in range(0, self.n_banks-1): - m.d.comb += iomux.bank_ports[bank+1].o.eq(periph_ports[bank].o) - m.d.comb += iomux.bank_ports[bank+1].oe.eq(periph_ports[bank].oe) - m.d.comb += periph_ports[bank].i.eq(iomux.bank_ports[bank+1].i) + # ports1-3 external + for port in range(0, self.n_ports-1): + m.d.comb += iomux.periph_ports[port+1].o.eq(periph_ports[port].o) + m.d.comb += iomux.periph_ports[port+1].oe.eq(periph_ports[port].oe) + m.d.comb += periph_ports[port].i.eq(iomux.periph_ports[port+1].i) m.d.comb += pad_port.o.eq(iomux.out_port.o) m.d.comb += pad_port.oe.eq(iomux.out_port.oe) @@ -108,14 +108,14 @@ class PinMuxBlockSingle(Elaboratable): yield field for field in self.bus.fields.values(): yield field - for bank in range(len(self.periph_ports)): - for field in self.periph_ports[bank].fields.values(): + for port in range(len(self.periph_ports)): + for field in self.periph_ports[port].fields.values(): yield field def ports(self): return list(self) -def gen_gtkw_doc(module_name, wordsize, n_banks, filename, pinspec): +def gen_gtkw_doc(module_name, wordsize, n_ports, filename, pinspec): # GTKWave doc generation style = { '': {'base': 'hex'}, @@ -138,16 +138,16 @@ def gen_gtkw_doc(module_name, wordsize, n_banks, filename, pinspec): ]) traces.append(wb_traces) - for bank in range(0, n_banks): - temp_traces = ('mux%d' % bank, [ - ('%s__i' % (pinspec["mux%d" % bank]), 'in'), - ('%s__o' % (pinspec["mux%d" % bank]), 'in'), - ('%s__oe' % (pinspec["mux%d" % bank]), 'in') + for port in range(0, n_ports): + temp_traces = ('mux%d' % port, [ + ('%s__i' % (pinspec["mux%d" % port]), 'in'), + ('%s__o' % (pinspec["mux%d" % port]), 'in'), + ('%s__oe' % (pinspec["mux%d" % port]), 'in') ]) traces.append(temp_traces) temp_traces = ('Misc', [ - ('bank[%d:0]' % ((n_banks-1).bit_length()-1), 'in') + ('port[%d:0]' % ((n_ports-1).bit_length()-1), 'in') ]) traces.append(temp_traces) temp_traces = ('IO port to pad named: %s' % pinspec["name"], [ @@ -185,13 +185,13 @@ def sim_iomux(): with sim_writer: sim.run() - gen_gtkw_doc("top.pinmux", wb_wordsize, dut.n_banks, filename, + gen_gtkw_doc("top.pinmux", wb_wordsize, dut.n_ports, filename, dummy_pinspec) def test_gpio_pinmux(dut): print("------START----------------------") - #print(dir(dut.bank_ports[0])) - #print(dut.bank_ports[0].fields) + #print(dir(dut.periph_ports[0])) + #print(dut.periph_ports[0].fields) gpios = GPIOManager(dut.gpio, csrbus_layout, dut.bus) @@ -200,7 +200,7 @@ def test_gpio_pinmux(dut): puen = 0 pden = 1 outval = 0 - bank = 0 + port = 0 yield from gpios.config("0", oe=1, ie=0, puen=0, pden=1, outval=0, bank=0) yield from gpios.set_out("0", outval=1) diff --git a/src/stage2.py b/src/stage2.py index 1d9374f..1cf5481 100644 --- a/src/stage2.py +++ b/src/stage2.py @@ -34,9 +34,9 @@ uart_layout = (("rx", 1), uart_tx_layout = (("o", 1), ("oe", 1) ) -GPIO_BANK = 0 -UART_BANK = 1 -I2C_BANK = 2 +GPIO_MUX = 0 +UART_MUX = 1 +I2C_MUX = 2 """ Really basic example, uart tx/rx and i2c sda/scl pinmux @@ -46,8 +46,8 @@ class ManPinmux(Elaboratable): print("Test Manual Pinmux!") self.requested = requested - self.n_banks = 4 - self.bank = Signal(log2_int(self.n_banks)) + self.n_ports = 4 + self.port = Signal(log2_int(self.n_ports)) self.pads = {} self.muxes = {} # Automatically create the necessary periph/pad Records/Signals @@ -55,7 +55,7 @@ class ManPinmux(Elaboratable): for pad in self.requested.keys(): self.pads[pad] = {} self.pads[pad]["pad"] = Record(name=pad, layout=io_layout) - self.muxes[pad] = IOMuxBlockSingle(self.n_banks) + self.muxes[pad] = IOMuxBlockSingle(self.n_ports) for mux in self.requested[pad].keys(): periph = self.requested[pad][mux][0] unit = self.requested[pad][mux][1] @@ -75,18 +75,18 @@ class ManPinmux(Elaboratable): m = Module() comb, sync = m.d.comb, m.d.sync muxes = self.muxes - bank = self.bank + port = self.port pads = self.pads for pad in pads.keys(): m.submodules[pad+"_mux"] = muxes[pad] # all muxes controlled by the same multi-bit signal - comb += muxes[pad].bank.eq(bank) + comb += muxes[pad].port.eq(port) # print(self.requested) # print(self.pads) # --------------------------- - # This section connects the periphs to the assigned banks + # This section connects the periphs to the assigned ports # --------------------------- for pad in pads.keys(): for mux in self.requested[pad].keys(): @@ -95,13 +95,14 @@ class ManPinmux(Elaboratable): sig = self.requested[pad][mux][2][:-1] sig_type = iotypes[self.requested[pad][mux][2][-1]] if sig_type == iotypes['*']: - comb += muxes[pad].bank_ports[num].o.eq(pads[pad][mux].o) - comb += muxes[pad].bank_ports[num].oe.eq(pads[pad][mux].oe) - comb += pads[pad][mux].i.eq(muxes[pad].bank_ports[num].i) + comb += muxes[pad].periph_ports[num].o.eq(pads[pad][mux].o) + comb += muxes[pad].periph_ports[num].oe.eq( + pads[pad][mux].oe) + comb += pads[pad][mux].i.eq(muxes[pad].periph_ports[num].i) elif sig_type == iotypes['+']: - comb += muxes[pad].bank_ports[num].o.eq(pads[pad][mux]) + comb += muxes[pad].periph_ports[num].o.eq(pads[pad][mux]) elif sig_type == iotypes['-']: - comb += pads[pad][mux].eq(muxes[pad].bank_ports[num].i) + comb += pads[pad][mux].eq(muxes[pad].periph_ports[num].i) # --------------------------- # Here is where the muxes are assigned to the actual pads # --------------------------- @@ -122,13 +123,13 @@ class ManPinmux(Elaboratable): else: for field in self.pads[pad][mux].fields.values(): yield field - yield self.bank + yield self.port def ports(self): return list(self) -def set_bank(dut, bank, delay=1e-6): - yield dut.bank.eq(bank) +def set_port(dut, port, delay=1e-6): + yield dut.port.eq(port) yield Delay(delay) """ @@ -270,13 +271,13 @@ def i2c_send(sda, scl, sda_pad, byte, delay=1e-6): # Test the GPIO/UART/I2C connectivity def test_man_pinmux(dut, requested): # TODO: Convert to automatic - # [{"pad":%s, "bank":%d}, {"pad":%s, "bank":%d},...] - #gpios = [{"padname":"N1", "bank":GPIO_BANK}, - # {"padname":"N2", "bank":GPIO_BANK}] - # [[txPAD, MUXx, rxPAD, MUXx],...] - diff banks not supported yet - uarts = [{"txpadname":"N1", "rxpadname":"N2", "bank":UART_BANK}] - # [[sdaPAD, MUXx, sclPAD, MUXx],...] - diff banks not supported yet - i2cs = [{"sdapadname":"N1", "sclpadname":"N2", "bank":I2C_BANK}] + # [{"pad":%s, "port":%d}, {"pad":%s, "port":%d},...] + #gpios = [{"padname":"N1", "port":GPIO_MUX}, + # {"padname":"N2", "port":GPIO_MUX}] + # [[txPAD, MUXx, rxPAD, MUXx],...] - diff ports not supported yet + uarts = [{"txpadname":"N1", "rxpadname":"N2", "mux":UART_MUX}] + # [[sdaPAD, MUXx, sclPAD, MUXx],...] - diff ports not supported yet + i2cs = [{"sdapadname":"N1", "sclpadname":"N2", "mux":I2C_MUX}] gpios = [] delay = 1e-6 @@ -285,8 +286,8 @@ def test_man_pinmux(dut, requested): periph = requested[pad][mux][0] if periph == "gpio": - # [{"padname":%s, "bank": %d}, ...] - gpios.append({"padname":pad, "bank": int(mux[3])}) + # [{"padname":%s, "port": %d}, ...] + gpios.append({"padname":pad, "mux": int(mux[3])}) if periph == "uart": # TODO: pass @@ -297,34 +298,34 @@ def test_man_pinmux(dut, requested): # GPIO test for gpio_periph in gpios: padname = gpio_periph["padname"] - gpio_bank = gpio_periph["bank"] - gp = dut.pads[padname]["mux%d" % gpio_bank] + gpio_port = gpio_periph["mux"] + gp = dut.pads[padname]["mux%d" % gpio_port] pad = dut.pads[padname]["pad"] - yield from set_bank(dut, gpio_bank) + yield from set_port(dut, gpio_port) yield from gpio(gp, pad, 0x5a5) # UART test for uart_periph in uarts: txpadname = uart_periph["txpadname"] rxpadname = uart_periph["rxpadname"] - uart_bank = uart_periph["bank"] - tx = dut.pads[txpadname]["mux%d" % uart_bank] - rx = dut.pads[rxpadname]["mux%d" % uart_bank] + uart_port = uart_periph["mux"] + tx = dut.pads[txpadname]["mux%d" % uart_port] + rx = dut.pads[rxpadname]["mux%d" % uart_port] txpad = dut.pads[txpadname]["pad"] rxpad = dut.pads[rxpadname]["pad"] - yield from set_bank(dut, UART_BANK) + yield from set_port(dut, UART_MUX) yield from uart_send(tx, rx, txpad, rxpad, 0x42) # I2C test for i2c_periph in i2cs: sdapadname = i2c_periph["sdapadname"] sclpadname = i2c_periph["sclpadname"] - i2c_bank = i2c_periph["bank"] - sda = dut.pads[sdapadname]["mux%d" % i2c_bank] - scl = dut.pads[sclpadname]["mux%d" % i2c_bank] + i2c_port = i2c_periph["mux"] + sda = dut.pads[sdapadname]["mux%d" % i2c_port] + scl = dut.pads[sclpadname]["mux%d" % i2c_port] sdapad = dut.pads[sdapadname]["pad"] - yield from set_bank(dut, I2C_BANK) + yield from set_port(dut, I2C_MUX) yield from i2c_send(sda, scl, sdapad, 0x67) def gen_gtkw_doc(module_name, requested, filename): @@ -338,11 +339,11 @@ def gen_gtkw_doc(module_name, requested, filename): # Create a trace list, each block expected to be a tuple() traces = [] temp = 0 - n_banks = 0 + n_ports = 0 for pad in requested.keys(): temp = len(requested[pad].keys()) - if n_banks < temp: - n_banks = temp + if n_ports < temp: + n_ports = temp temp_traces = ("Pad %s" % pad, []) # Pad signals temp_traces[1].append(('%s__i' % pad, 'in')) @@ -374,9 +375,9 @@ def gen_gtkw_doc(module_name, requested, filename): temp_traces[1].append(('%s%d__oe' % (pin, unit_num), 'out')) traces.append(temp_traces) - # master bank signal + # master port signal temp_traces = ('Misc', [ - ('bank[%d:0]' % ((n_banks-1).bit_length()-1), 'in') + ('port[%d:0]' % ((n_ports-1).bit_length()-1), 'in') ]) traces.append(temp_traces) @@ -388,14 +389,14 @@ def gen_gtkw_doc(module_name, requested, filename): def sim_man_pinmux(): filename = "test_man_pinmux" - requested = {"N1": {"mux%d" % GPIO_BANK: ["gpio", 0, '0*'], - "mux%d" % UART_BANK: ["uart", 0, 'tx+'], - "mux%d" % I2C_BANK: ["i2c", 0, 'sda*']}, - "N2": {"mux%d" % GPIO_BANK: ["gpio", 1, '*'], - "mux%d" % UART_BANK: ["uart", 0, 'rx-'], - "mux%d" % I2C_BANK: ["i2c", 0, 'scl*']}, - "N3": {"mux%d" % GPIO_BANK: ["gpio", 2, '0*']}, - "N4": {"mux%d" % GPIO_BANK: ["gpio", 3, '0*']} + requested = {"N1": {"mux%d" % GPIO_MUX: ["gpio", 0, '0*'], + "mux%d" % UART_MUX: ["uart", 0, 'tx+'], + "mux%d" % I2C_MUX: ["i2c", 0, 'sda*']}, + "N2": {"mux%d" % GPIO_MUX: ["gpio", 1, '*'], + "mux%d" % UART_MUX: ["uart", 0, 'rx-'], + "mux%d" % I2C_MUX: ["i2c", 0, 'scl*']}, + "N3": {"mux%d" % GPIO_MUX: ["gpio", 2, '0*']}, + "N4": {"mux%d" % GPIO_MUX: ["gpio", 3, '0*']} } dut = ManPinmux(requested) vl = rtlil.convert(dut, ports=dut.ports()) @@ -420,7 +421,7 @@ if __name__ == '__main__': #function_names = [] #testspec = PinSpec() pinbanks = { - 'A': (4, 4), # (num of pads, num of banks)? + 'A': (4, 4), # bankname: (num of pins, muxwidth) #'B': (18, 4), #'C': (24, 1), #'D': (93, 1), @@ -442,7 +443,8 @@ if __name__ == '__main__': print(dir(ps.gpio)) #print(ps.gpio.pinouts, ps.gpio.bankspec, ps.gpio.pinfn, ps.gpio.fname) """ - desc_dict_keys = ['UART0', 'TWI0', 'GPIOA_A0', 'GPIOA_A1', 'GPIOA_A2', 'GPIOA_A3'] + desc_dict_keys = ['UART0', 'TWI0', 'GPIOA_A0', 'GPIOA_A1', 'GPIOA_A2', + 'GPIOA_A3'] eint = [] pwm = [] desc = {'UART0': 'Basic serial TX/RX serial port',