From: Fabio Estevam Date: Tue, 13 Dec 2016 17:13:13 +0000 (-0200) Subject: mx6sx: Add support for mx6sx udoo neo boards X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=c5255422538103afa1acba50c54f81bcf07d7a0d;p=buildroot.git mx6sx: Add support for mx6sx udoo neo boards Add support for mx6sx udoo neo boards. For more information about these boards, please check: http://www.udoo.org/udoo-neo The U-Boot and kernel dts patches will be removed when we bump U-Boot to 2017.01 and kernel to 4.10 version as they have already been sent upstream. Signed-off-by: Fabio Estevam Signed-off-by: Peter Korsgaard --- diff --git a/board/udoo/neo/boot.scr.txt b/board/udoo/neo/boot.scr.txt new file mode 100644 index 0000000000..f647db3719 --- /dev/null +++ b/board/udoo/neo/boot.scr.txt @@ -0,0 +1,7 @@ +setenv finduuid "part uuid mmc 0:1 uuid" +run finduuid +run findfdt +setenv bootargs "console=ttymxc0,115200 root=PARTUUID=${uuid} rootwait rootfstype=ext4" +load mmc 0:1 ${fdt_addr} boot/${fdt_file} +load mmc 0:1 ${loadaddr} boot/zImage +bootz ${loadaddr} - ${fdt_addr} diff --git a/board/udoo/neo/genimage.cfg b/board/udoo/neo/genimage.cfg new file mode 100644 index 0000000000..1f7edf4aa3 --- /dev/null +++ b/board/udoo/neo/genimage.cfg @@ -0,0 +1,31 @@ +# Minimal SD card image for the MX6SX Udoo Neo board +# +# The SD card must have at least 1 MB free at the beginning. +# U-Boot and its environment are dumped as is. +# A single root filesystem partition is required (Ext4 in this case). +# +# For details about the layout, see: +# http://wiki.wandboard.org/index.php/Boot-process + +image sdcard.img { + hdimage { + } + + partition spl { + in-partition-table = "no" + image = "SPL" + offset = 1K + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.img" + offset = 69K + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +} diff --git a/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch b/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch new file mode 100644 index 0000000000..2e8cea5d12 --- /dev/null +++ b/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch @@ -0,0 +1,560 @@ +From 76e691fc7653b85d390e58710e5c7db73ca49367 Mon Sep 17 00:00:00 2001 +From: Andreas Färber +Date: Sun, 16 Oct 2016 16:44:23 +0200 +Subject: ARM: dts: imx6sx: Add UDOO Neo support +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add initial device trees for UDOO Neo Basic, Extended and Full boards: +* Serial console is enabled, other serial ports are prepared. +* I2C based PMIC is enabled. +* Ethernet is enabled for Basic and Full. +* SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator. +* Both user LEDs are enabled, with the orange one reserved for the M4 + and with the SD card as default trigger for the red LED. + +The decision on a board compatible string is deferred to later. + +Cc: Ettore Chimenti +Signed-off-by: Andreas Färber +Signed-off-by: Shawn Guo +--- + arch/arm/boot/dts/Makefile | 5 +- + arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts | 69 ++++++ + arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts | 54 +++++ + arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 69 ++++++ + arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 293 +++++++++++++++++++++++++ + 5 files changed, 489 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts + create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts + create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-full.dts + create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 019976b..da0197d 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -417,7 +417,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ + imx6sx-sabreauto.dtb \ + imx6sx-sdb-reva.dtb \ + imx6sx-sdb-sai.dtb \ +- imx6sx-sdb.dtb ++ imx6sx-sdb.dtb \ ++ imx6sx-udoo-neo-basic.dtb \ ++ imx6sx-udoo-neo-extended.dtb \ ++ imx6sx-udoo-neo-full.dtb + dtb-$(CONFIG_SOC_IMX6UL) += \ + imx6ul-14x14-evk.dtb \ + imx6ul-geam-kit.dtb \ +diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts +new file mode 100644 +index 0000000..0b88878 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts +@@ -0,0 +1,69 @@ ++/* ++ * Copyright (c) 2016 Andreas Färber ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++ ++#include "imx6sx-udoo-neo.dtsi" ++ ++/ { ++ model = "UDOO Neo Basic"; ++ compatible = "fsl,imx6sx"; ++ ++ memory { ++ reg = <0x80000000 0x20000000>; ++ }; ++}; ++ ++&fec1 { ++ phy-handle = <ðphy1>; ++ status = "okay"; ++ ++ mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ethphy1: ethernet-phy@0 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <0>; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts +new file mode 100644 +index 0000000..d6fdd17 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts +@@ -0,0 +1,54 @@ ++/* ++ * Copyright (c) 2016 Andreas Färber ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++ ++#include "imx6sx-udoo-neo.dtsi" ++ ++/ { ++ model = "UDOO Neo Extended"; ++ compatible = "fsl,imx6sx"; ++ ++ memory { ++ reg = <0x80000000 0x40000000>; ++ }; ++}; +diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts +new file mode 100644 +index 0000000..d8c3577 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts +@@ -0,0 +1,69 @@ ++/* ++ * Copyright (c) 2016 Andreas Färber ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++ ++#include "imx6sx-udoo-neo.dtsi" ++ ++/ { ++ model = "UDOO Neo Full"; ++ compatible = "fsl,imx6sx"; ++ ++ memory { ++ reg = <0x80000000 0x40000000>; ++ }; ++}; ++ ++&fec1 { ++ phy-handle = <ðphy1>; ++ status = "okay"; ++ ++ mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ethphy1: ethernet-phy@0 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <0>; ++ }; ++ }; ++}; +diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +new file mode 100644 +index 0000000..2b65d26 +--- /dev/null ++++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +@@ -0,0 +1,293 @@ ++/* ++ * Copyright (c) 2016 Andreas Färber ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#include "imx6sx.dtsi" ++ ++/ { ++ compatible = "fsl,imx6sx"; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ red { ++ label = "udoo-neo:red:mmc"; ++ gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ linux,default-trigger = "mmc0"; ++ }; ++ ++ orange { ++ label = "udoo-neo:orange:user"; ++ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; ++ default-state = "keep"; ++ }; ++ }; ++ ++ reg_sdio_pwr: regulator-sdio-pwr { ++ compatible = "regulator-fixed"; ++ gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-name = "SDIO_PWR"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ }; ++}; ++ ++&cpu0 { ++ arm-supply = <&sw1a_reg>; ++ soc-supply = <&sw1c_reg>; ++}; ++ ++&fec1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_enet1>; ++ phy-mode = "rmii"; ++ phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; ++}; ++ ++&i2c1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_i2c1>; ++ clock-frequency = <100000>; ++ status = "okay"; ++ ++ pmic: pmic@08 { ++ compatible = "fsl,pfuze3000"; ++ reg = <0x08>; ++ ++ regulators { ++ sw1a_reg: sw1a { ++ regulator-min-microvolt = <700000>; ++ regulator-max-microvolt = <1475000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-ramp-delay = <6250>; ++ }; ++ ++ sw1c_reg: sw1b { ++ regulator-min-microvolt = <700000>; ++ regulator-max-microvolt = <1475000>; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-ramp-delay = <6250>; ++ }; ++ ++ sw2_reg: sw2 { ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1850000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ sw3a_reg: sw3 { ++ regulator-min-microvolt = <900000>; ++ regulator-max-microvolt = <1650000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ swbst_reg: swbst { ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5150000>; ++ }; ++ ++ snvs_reg: vsnvs { ++ regulator-min-microvolt = <1000000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ vref_reg: vrefddr { ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ vgen1_reg: vldo1 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen2_reg: vldo2 { ++ regulator-min-microvolt = <800000>; ++ regulator-max-microvolt = <1550000>; ++ }; ++ ++ vgen3_reg: vccsd { ++ regulator-min-microvolt = <2850000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen4_reg: v33 { ++ regulator-min-microvolt = <2850000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen5_reg: vldo3 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vgen6_reg: vldo4 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ }; ++ }; ++}; ++ ++&iomuxc { ++ pinctrl_enet1: enet1grp { ++ fsl,pins = ++ , ++ , ++ , ++ , ++ , ++ , ++ ++ , ++ , ++ , ++ , ++ , ++ , ++ ++ ; ++ }; ++ ++ pinctrl_i2c1: i2c1grp { ++ fsl,pins = ++ , ++ ; ++ }; ++ ++ pinctrl_uart1: uart1grp { ++ fsl,pins = ++ , ++ ; ++ }; ++ ++ pinctrl_uart2: uart2grp { ++ fsl,pins = ++ , ++ ; ++ }; ++ ++ pinctrl_uart5: uart5grp { ++ fsl,pins = ++ , ++ ; ++ }; ++ ++ pinctrl_uart6: uart6grp { ++ fsl,pins = ++ , ++ , ++ , ++ , ++ , ++ , ++ , ++ ; ++ }; ++ ++ pinctrl_usdhc2: usdhc2grp { ++ fsl,pins = ++ , ++ , ++ , ++ , ++ , ++ , ++ ; /* CD */ ++ }; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart1>; ++ status = "okay"; ++}; ++ ++/* Cortex-M4 serial */ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart2>; ++ status = "disabled"; ++}; ++ ++/* Arduino serial */ ++&uart5 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart5>; ++ status = "disabled"; ++}; ++ ++&uart6 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_uart6>; ++ uart-has-rtscts; ++ status = "disabled"; ++}; ++ ++&usdhc2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinctrl_usdhc2>; ++ vmmc-supply = <®_sdio_pwr>; ++ bus-width = <4>; ++ cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; ++ no-1-8-v; ++ keep-power-in-suspend; ++ wakeup-source; ++ status = "okay"; ++}; +-- +cgit v0.12 diff --git a/board/udoo/neo/patches/uboot/0001-udoo.patch b/board/udoo/neo/patches/uboot/0001-udoo.patch new file mode 100644 index 0000000000..ec1e00d8ff --- /dev/null +++ b/board/udoo/neo/patches/uboot/0001-udoo.patch @@ -0,0 +1,691 @@ +From 792f186846672140deca7dfbf2f20aece26b5348 Mon Sep 17 00:00:00 2001 +From: Breno Lima +Date: Fri, 25 Nov 2016 16:56:57 -0200 +Subject: [PATCH] mx6sx: Add initial support for UDOO Neo Board + +UDOO Neo Board is a development board from Seco that has three models: + - UDOO Neo Basic + - UDOO Neo Basic Kick Starter + - UDOO Neo Extended + - UDOO Neo Full + +All versions are based on the i.MX6 SoloX processor. + +For more details about the UDOO Neo board, please refer to: +http://www.udoo.org/udoo-neo/ + +This work is based on a previous commit of Francesco Montefoschi +: +https://github.com/fmntf/u-boot/commit/877b71184a5105e708024f232d36aed574961844 + +Only tested on the UDOO Neo Full board. + +Signed-off-by: Breno Lima +Reviewed-by: Fabio Estevam +--- + arch/arm/cpu/armv7/mx6/Kconfig | 5 + + board/udoo/neo/Kconfig | 12 ++ + board/udoo/neo/MAINTAINERS | 7 + + board/udoo/neo/Makefile | 6 + + board/udoo/neo/neo.c | 441 ++++++++++++++++++++++++++++++++++++++++ + configs/udoo_neo_defconfig | 30 +++ + include/configs/udoo_neo.h | 94 +++++++++ + 7 files changed, 595 insertions(+) + create mode 100644 board/udoo/neo/Kconfig + create mode 100644 board/udoo/neo/MAINTAINERS + create mode 100644 board/udoo/neo/Makefile + create mode 100644 board/udoo/neo/neo.c + create mode 100644 configs/udoo_neo_defconfig + create mode 100644 include/configs/udoo_neo.h + +diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig +index 8b2217e..a81d944 100644 +--- a/arch/arm/cpu/armv7/mx6/Kconfig ++++ b/arch/arm/cpu/armv7/mx6/Kconfig +@@ -200,6 +200,10 @@ config TARGET_UDOO + bool "udoo" + select SUPPORT_SPL + ++config TARGET_UDOO_NEO ++ bool "UDOO Neo" ++ select SUPPORT_SPL ++ + config TARGET_WANDBOARD + bool "wandboard" + select SUPPORT_SPL +@@ -261,6 +265,7 @@ source "board/technexion/pico-imx6ul/Kconfig" + source "board/tbs/tbs2910/Kconfig" + source "board/tqc/tqma6/Kconfig" + source "board/udoo/Kconfig" ++source "board/udoo/neo/Kconfig" + source "board/wandboard/Kconfig" + source "board/warp/Kconfig" + +diff --git a/board/udoo/neo/Kconfig b/board/udoo/neo/Kconfig +new file mode 100644 +index 0000000..8f474df +--- /dev/null ++++ b/board/udoo/neo/Kconfig +@@ -0,0 +1,12 @@ ++if TARGET_UDOO_NEO ++ ++config SYS_VENDOR ++ default "udoo" ++ ++config SYS_BOARD ++ default "neo" ++ ++config SYS_CONFIG_NAME ++ default "udoo_neo" ++ ++endif +diff --git a/board/udoo/neo/MAINTAINERS b/board/udoo/neo/MAINTAINERS +new file mode 100644 +index 0000000..743fe33 +--- /dev/null ++++ b/board/udoo/neo/MAINTAINERS +@@ -0,0 +1,7 @@ ++UDOO NEO BOARD ++M: Breno Lima ++M: Francesco Montefoschi ++S: Maintained ++F: board/udoo/neo/ ++F: include/configs/udoo_neo.h ++F: configs/udoo_neo_defconfig +diff --git a/board/udoo/neo/Makefile b/board/udoo/neo/Makefile +new file mode 100644 +index 0000000..150cbc1 +--- /dev/null ++++ b/board/udoo/neo/Makefile +@@ -0,0 +1,6 @@ ++# (C) Copyright 2015 UDOO Team ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++obj-y := neo.o +diff --git a/board/udoo/neo/neo.c b/board/udoo/neo/neo.c +new file mode 100644 +index 0000000..7f17469 +--- /dev/null ++++ b/board/udoo/neo/neo.c +@@ -0,0 +1,441 @@ ++/* ++ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. ++ * Copyright (C) Jasbir Matharu ++ * Copyright (C) UDOO Team ++ * ++ * Author: Breno Lima ++ * Author: Francesco Montefoschi ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++enum { ++ UDOO_NEO_TYPE_BASIC, ++ UDOO_NEO_TYPE_BASIC_KS, ++ UDOO_NEO_TYPE_FULL, ++ UDOO_NEO_TYPE_EXTENDED, ++}; ++ ++#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ ++ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ ++ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) ++ ++#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ ++ PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ ++ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) ++ ++#define WDOG_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | \ ++ PAD_CTL_DSE_40ohm) ++ ++#define BOARD_DETECT_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ ++ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ ++ PAD_CTL_DSE_34ohm | PAD_CTL_HYS | PAD_CTL_SRE_FAST) ++#define BOARD_DETECT_PAD_CFG (MUX_PAD_CTRL(BOARD_DETECT_PAD_CTRL) | \ ++ MUX_MODE_SION) ++ ++int dram_init(void) ++{ ++ gd->ram_size = imx_ddr_size(); ++ return 0; ++} ++ ++static iomux_v3_cfg_t const uart1_pads[] = { ++ MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), ++ MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), ++}; ++ ++static iomux_v3_cfg_t const usdhc2_pads[] = { ++ MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++ MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++ MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++ MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++ MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++ MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++ /* CD pin */ ++ MX6_PAD_SD1_DATA0__GPIO6_IO_2 | MUX_PAD_CTRL(NO_PAD_CTRL), ++ /* Power */ ++ MX6_PAD_SD1_CMD__GPIO6_IO_1 | MUX_PAD_CTRL(NO_PAD_CTRL), ++}; ++ ++static iomux_v3_cfg_t const board_recognition_pads[] = { ++ /*Connected to R184*/ ++ MX6_PAD_NAND_READY_B__GPIO4_IO_13 | BOARD_DETECT_PAD_CFG, ++ /*Connected to R185*/ ++ MX6_PAD_NAND_ALE__GPIO4_IO_0 | BOARD_DETECT_PAD_CFG, ++}; ++ ++static iomux_v3_cfg_t const usdhc3_pads[] = { ++ /* Configured for WLAN */ ++ MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++ MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++ MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++ MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++ MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++ MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), ++}; ++ ++static iomux_v3_cfg_t const wdog_b_pad = { ++ MX6_PAD_GPIO1_IO13__GPIO1_IO_13 | MUX_PAD_CTRL(WDOG_PAD_CTRL), ++}; ++ ++static iomux_v3_cfg_t const peri_3v3_pads[] = { ++ MX6_PAD_QSPI1A_DATA0__GPIO4_IO_16 | MUX_PAD_CTRL(NO_PAD_CTRL), ++}; ++ ++static void setup_iomux_uart(void) ++{ ++ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); ++} ++ ++int board_init(void) ++{ ++ /* Address of boot parameters */ ++ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; ++ ++ /* ++ * Because kernel set WDOG_B mux before pad with the commone pinctrl ++ * framwork now and wdog reset will be triggered once set WDOG_B mux ++ * with default pad setting, we set pad setting here to workaround this. ++ * Since imx_iomux_v3_setup_pad also set mux before pad setting, we set ++ * as GPIO mux firstly here to workaround it. ++ */ ++ imx_iomux_v3_setup_pad(wdog_b_pad); ++ ++ /* Enable PERI_3V3, which is used by SD2, ENET, LVDS, BT */ ++ imx_iomux_v3_setup_multiple_pads(peri_3v3_pads, ++ ARRAY_SIZE(peri_3v3_pads)); ++ ++ /* Active high for ncp692 */ ++ gpio_direction_output(IMX_GPIO_NR(4, 16) , 1); ++ ++ return 0; ++} ++ ++static int get_board_value(void) ++{ ++ int r184, r185; ++ ++ imx_iomux_v3_setup_multiple_pads(board_recognition_pads, ++ ARRAY_SIZE(board_recognition_pads)); ++ ++ gpio_direction_input(IMX_GPIO_NR(4, 13)); ++ gpio_direction_input(IMX_GPIO_NR(4, 0)); ++ ++ r184 = gpio_get_value(IMX_GPIO_NR(4, 13)); ++ r185 = gpio_get_value(IMX_GPIO_NR(4, 0)); ++ ++ /* ++ * Machine selection - ++ * Machine r184, r185 ++ * --------------------------------- ++ * Basic 0 0 ++ * Basic Ks 0 1 ++ * Full 1 0 ++ * Extended 1 1 ++ */ ++ ++ return (r184 << 1) + r185; ++} ++ ++int board_early_init_f(void) ++{ ++ setup_iomux_uart(); ++ ++ return 0; ++} ++ ++static struct fsl_esdhc_cfg usdhc_cfg[2] = { ++ {USDHC2_BASE_ADDR, 0, 4}, ++ {USDHC3_BASE_ADDR, 0, 4}, ++}; ++ ++#define USDHC2_PWR_GPIO IMX_GPIO_NR(6, 1) ++#define USDHC2_CD_GPIO IMX_GPIO_NR(6, 2) ++ ++int board_mmc_getcd(struct mmc *mmc) ++{ ++ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; ++ int ret = 0; ++ ++ switch (cfg->esdhc_base) { ++ case USDHC2_BASE_ADDR: ++ ret = !gpio_get_value(USDHC2_CD_GPIO); ++ break; ++ } ++ ++ return ret; ++} ++ ++int board_mmc_init(bd_t *bis) ++{ ++#ifndef CONFIG_SPL_BUILD ++ int i, ret; ++ ++ /* ++ * According to the board_mmc_init() the following map is done: ++ * (U-boot device node) (Physical Port) ++ * mmc0 USDHC2 ++ */ ++ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { ++ switch (i) { ++ case 0: ++ imx_iomux_v3_setup_multiple_pads( ++ usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); ++ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); ++ gpio_direction_input(USDHC2_CD_GPIO); ++ gpio_direction_output(USDHC2_PWR_GPIO, 1); ++ break; ++ case 1: ++ imx_iomux_v3_setup_multiple_pads( ++ usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); ++ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); ++ break; ++ default: ++ printf("Warning: you configured more USDHC controllers\ ++ (%d) than supported by the board\n", i + 1); ++ return -EINVAL; ++ } ++ ++ ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); ++ if (ret) { ++ printf("Warning:\ ++ failed to initialize mmc dev %d\n", i); ++ return ret; ++ } ++ } ++ ++ return 0; ++#else ++ struct src *src_regs = (struct src *)SRC_BASE_ADDR; ++ u32 val; ++ u32 port; ++ ++ val = readl(&src_regs->sbmr1); ++ ++ if ((val & 0xc0) != 0x40) { ++ printf("Not boot from USDHC!\n"); ++ return -EINVAL; ++ } ++ ++ port = (val >> 11) & 0x3; ++ printf("port %d\n", port); ++ switch (port) { ++ case 1: ++ imx_iomux_v3_setup_multiple_pads( ++ usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); ++ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); ++ usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; ++ gpio_direction_input(USDHC2_CD_GPIO); ++ gpio_direction_output(USDHC2_PWR_GPIO, 1); ++ break; ++ case 2: ++ imx_iomux_v3_setup_multiple_pads( ++ usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); ++ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); ++ usdhc_cfg[1].esdhc_base = USDHC3_BASE_ADDR; ++ break; ++ } ++ ++ gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; ++ return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); ++#endif ++} ++ ++char *board_string(void) ++{ ++ switch (get_board_value()) { ++ case UDOO_NEO_TYPE_BASIC: ++ return "BASIC"; ++ case UDOO_NEO_TYPE_BASIC_KS: ++ return "BASICKS"; ++ case UDOO_NEO_TYPE_FULL: ++ return "FULL"; ++ case UDOO_NEO_TYPE_EXTENDED: ++ return "EXTENDED"; ++ } ++ return "UNDEFINED"; ++} ++ ++int checkboard(void) ++{ ++ printf("Board: UDOO Neo %s\n", board_string()); ++ return 0; ++} ++ ++int board_late_init(void) ++{ ++#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG ++ setenv("board_name", board_string()); ++#endif ++ ++ return 0; ++} ++ ++#ifdef CONFIG_SPL_BUILD ++ ++#include ++#include ++ ++static const struct mx6sx_iomux_ddr_regs mx6_ddr_ioregs = { ++ .dram_dqm0 = 0x00000028, ++ .dram_dqm1 = 0x00000028, ++ .dram_dqm2 = 0x00000028, ++ .dram_dqm3 = 0x00000028, ++ .dram_ras = 0x00000020, ++ .dram_cas = 0x00000020, ++ .dram_odt0 = 0x00000020, ++ .dram_odt1 = 0x00000020, ++ .dram_sdba2 = 0x00000000, ++ .dram_sdcke0 = 0x00003000, ++ .dram_sdcke1 = 0x00003000, ++ .dram_sdclk_0 = 0x00000030, ++ .dram_sdqs0 = 0x00000028, ++ .dram_sdqs1 = 0x00000028, ++ .dram_sdqs2 = 0x00000028, ++ .dram_sdqs3 = 0x00000028, ++ .dram_reset = 0x00000020, ++}; ++ ++static const struct mx6sx_iomux_grp_regs mx6_grp_ioregs = { ++ .grp_addds = 0x00000020, ++ .grp_ddrmode_ctl = 0x00020000, ++ .grp_ddrpke = 0x00000000, ++ .grp_ddrmode = 0x00020000, ++ .grp_b0ds = 0x00000028, ++ .grp_b1ds = 0x00000028, ++ .grp_ctlds = 0x00000020, ++ .grp_ddr_type = 0x000c0000, ++ .grp_b2ds = 0x00000028, ++ .grp_b3ds = 0x00000028, ++}; ++ ++static const struct mx6_mmdc_calibration neo_mmcd_calib = { ++ .p0_mpwldectrl0 = 0x000E000B, ++ .p0_mpwldectrl1 = 0x000E0010, ++ .p0_mpdgctrl0 = 0x41600158, ++ .p0_mpdgctrl1 = 0x01500140, ++ .p0_mprddlctl = 0x3A383E3E, ++ .p0_mpwrdlctl = 0x3A383C38, ++}; ++ ++static const struct mx6_mmdc_calibration neo_basic_mmcd_calib = { ++ .p0_mpwldectrl0 = 0x001E0022, ++ .p0_mpwldectrl1 = 0x001C0019, ++ .p0_mpdgctrl0 = 0x41540150, ++ .p0_mpdgctrl1 = 0x01440138, ++ .p0_mprddlctl = 0x403E4644, ++ .p0_mpwrdlctl = 0x3C3A4038, ++}; ++ ++/* MT41K256M16 */ ++static struct mx6_ddr3_cfg neo_mem_ddr = { ++ .mem_speed = 1600, ++ .density = 4, ++ .width = 16, ++ .banks = 8, ++ .rowaddr = 15, ++ .coladdr = 10, ++ .pagesz = 2, ++ .trcd = 1375, ++ .trcmin = 4875, ++ .trasmin = 3500, ++}; ++ ++/* MT41K128M16 */ ++static struct mx6_ddr3_cfg neo_basic_mem_ddr = { ++ .mem_speed = 1600, ++ .density = 2, ++ .width = 16, ++ .banks = 8, ++ .rowaddr = 14, ++ .coladdr = 10, ++ .pagesz = 2, ++ .trcd = 1375, ++ .trcmin = 4875, ++ .trasmin = 3500, ++}; ++ ++static void ccgr_init(void) ++{ ++ struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; ++ ++ writel(0xFFFFFFFF, &ccm->CCGR0); ++ writel(0xFFFFFFFF, &ccm->CCGR1); ++ writel(0xFFFFFFFF, &ccm->CCGR2); ++ writel(0xFFFFFFFF, &ccm->CCGR3); ++ writel(0xFFFFFFFF, &ccm->CCGR4); ++ writel(0xFFFFFFFF, &ccm->CCGR5); ++ writel(0xFFFFFFFF, &ccm->CCGR6); ++ writel(0xFFFFFFFF, &ccm->CCGR7); ++} ++ ++static void spl_dram_init(void) ++{ ++ int board = get_board_value(); ++ ++ struct mx6_ddr_sysinfo sysinfo = { ++ .dsize = 1, /* width of data bus: 1 = 32 bits */ ++ .cs_density = 24, ++ .ncs = 1, ++ .cs1_mirror = 0, ++ .rtt_wr = 2, ++ .rtt_nom = 2, /* RTT_Nom = RZQ/2 */ ++ .walat = 1, /* Write additional latency */ ++ .ralat = 5, /* Read additional latency */ ++ .mif3_mode = 3, /* Command prediction working mode */ ++ .bi_on = 1, /* Bank interleaving enabled */ ++ .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ ++ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ ++ }; ++ ++ mx6sx_dram_iocfg(32, &mx6_ddr_ioregs, &mx6_grp_ioregs); ++ if (board == UDOO_NEO_TYPE_BASIC || board == UDOO_NEO_TYPE_BASIC_KS) ++ mx6_dram_cfg(&sysinfo, &neo_basic_mmcd_calib, ++ &neo_basic_mem_ddr); ++ else ++ mx6_dram_cfg(&sysinfo, &neo_mmcd_calib, &neo_mem_ddr); ++} ++ ++void board_init_f(ulong dummy) ++{ ++ ccgr_init(); ++ ++ /* setup AIPS and disable watchdog */ ++ arch_cpu_init(); ++ ++ board_early_init_f(); ++ ++ /* setup GP timer */ ++ timer_init(); ++ ++ /* UART clocks enabled and gd valid - init serial console */ ++ preloader_console_init(); ++ ++ /* DDR initialization */ ++ spl_dram_init(); ++ ++ /* Clear the BSS. */ ++ memset(__bss_start, 0, __bss_end - __bss_start); ++ ++ /* load/boot image from boot device */ ++ board_init_r(NULL, 0); ++} ++ ++#endif +diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig +new file mode 100644 +index 0000000..3304afb +--- /dev/null ++++ b/configs/udoo_neo_defconfig +@@ -0,0 +1,30 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_MX6=y ++CONFIG_SPL_GPIO_SUPPORT=y ++CONFIG_SPL_LIBCOMMON_SUPPORT=y ++CONFIG_SPL_LIBGENERIC_SUPPORT=y ++CONFIG_TARGET_UDOO_NEO=y ++CONFIG_SPL_EXT_SUPPORT=y ++CONFIG_SPL_LIBDISK_SUPPORT=y ++CONFIG_SPL_MMC_SUPPORT=y ++CONFIG_SPL_SERIAL_SUPPORT=y ++CONFIG_SPL_ENV_SUPPORT=y ++CONFIG_SPL_WATCHDOG_SUPPORT=y ++CONFIG_SPL=y ++CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6SX" ++CONFIG_HUSH_PARSER=y ++CONFIG_CMD_BOOTZ=y ++# CONFIG_CMD_IMLS is not set ++# CONFIG_CMD_FLASH is not set ++CONFIG_CMD_MMC=y ++CONFIG_CMD_GPIO=y ++# CONFIG_CMD_SETEXPR is not set ++# CONFIG_CMD_DHCP=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_TIME=y ++CONFIG_CMD_EXT2=y ++CONFIG_CMD_EXT4=y ++CONFIG_CMD_EXT4_WRITE=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_OF_LIBFDT=y +diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h +new file mode 100644 +index 0000000..81e0481 +--- /dev/null ++++ b/include/configs/udoo_neo.h +@@ -0,0 +1,94 @@ ++/* ++ * Copyright 2014-2015 Freescale Semiconductor, Inc. ++ * Copyright Jasbir Matharu ++ * Copyright 2015 UDOO Team ++ * ++ * Configuration settings for the UDOO NEO board. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#include ++#include "mx6_common.h" ++ ++#include "imx6_spl.h" ++ ++/* Size of malloc() pool */ ++#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) ++#define CONFIG_BOARD_EARLY_INIT_F ++#define CONFIG_BOARD_LATE_INIT ++#define CONFIG_MXC_UART ++ ++/* MMC Configuration */ ++#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR ++ ++/* Command definition */ ++#define CONFIG_MXC_UART_BASE UART1_BASE ++#define CONFIG_SYS_FSL_USDHC_NUM 2 ++#define CONFIG_SYS_MMC_ENV_DEV 0 /*USDHC2*/ ++ ++/* Linux only */ ++#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "console=ttymxc0,115200\0" \ ++ "fdt_high=0xffffffff\0" \ ++ "initrd_high=0xffffffff\0" \ ++ "fdt_file=undefined\0" \ ++ "fdt_addr=0x83000000\0" \ ++ "ip_dyn=yes\0" \ ++ "mmcdev=0\0" \ ++ "mmcrootfstype=ext4\0" \ ++ "mmcautodetect=no\0" \ ++ "findfdt="\ ++ "if test $board_name = BASIC; then " \ ++ "setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \ ++ "if test $board_name = BASICKS; then " \ ++ "setenv fdt_file imx6sx-udoo-neo-basic.dtb; fi; " \ ++ "if test $board_name = FULL; then " \ ++ "setenv fdt_file imx6sx-udoo-neo-full.dtb; fi; " \ ++ "if test $board_name = EXTENDED; then " \ ++ "setenv fdt_file imx6sx-udoo-neo-extended.dtb; fi; " \ ++ "if test $fdt_file = UNDEFINED; then " \ ++ "echo WARNING: Could not determine dtb to use; fi; \0" \ ++ "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ ++ "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ ++ "ramdisk_addr_r=0x83000000\0" \ ++ "ramdiskaddr=0x83000000\0" \ ++ "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ ++ BOOTENV ++ ++#define BOOT_TARGET_DEVICES(func) \ ++ func(MMC, mmc, 0) ++ ++#define CONFIG_BOOTCOMMAND \ ++ "run findfdt; " \ ++ "run distro_bootcmd" ++ ++#include ++ ++/* Miscellaneous configurable options */ ++#define CONFIG_SYS_MEMTEST_START 0x80000000 ++#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) ++#define CONFIG_STACKSIZE SZ_128K ++ ++/* Physical Memory Map */ ++#define CONFIG_NR_DRAM_BANKS 1 ++#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR ++#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM ++#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR ++#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE ++ ++#define CONFIG_SYS_INIT_SP_OFFSET \ ++ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) ++#define CONFIG_SYS_INIT_SP_ADDR \ ++ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) ++ ++/* Environment organization */ ++#define CONFIG_ENV_OFFSET (8 * SZ_64K) ++#define CONFIG_ENV_SIZE SZ_8K ++#define CONFIG_ENV_IS_IN_MMC ++ ++#endif /* __CONFIG_H */ +-- +1.7.10.4 diff --git a/board/udoo/neo/post-build.sh b/board/udoo/neo/post-build.sh new file mode 100755 index 0000000000..07c480e616 --- /dev/null +++ b/board/udoo/neo/post-build.sh @@ -0,0 +1,8 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +$HOST_DIR/usr/bin/mkimage -A arm -O linux -T script -C none \ +-n "boot script" -d $BOARD_DIR/boot.scr.txt $BOARD_DIR/boot.scr + +install -m 0644 -D $BOARD_DIR/boot.scr $TARGET_DIR/boot/boot.scr diff --git a/board/udoo/neo/post-image.sh b/board/udoo/neo/post-image.sh new file mode 100755 index 0000000000..18e76aa40d --- /dev/null +++ b/board/udoo/neo/post-image.sh @@ -0,0 +1,15 @@ +#!/usr/bin/env bash + +BOARD_DIR="$(dirname $0)" +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" + +rm -rf "${GENIMAGE_TMP}" + +genimage \ + --rootpath "${TARGET_DIR}" \ + --tmppath "${GENIMAGE_TMP}" \ + --inputpath "${BINARIES_DIR}" \ + --outputpath "${BINARIES_DIR}" \ + --config "${GENIMAGE_CFG}" + diff --git a/board/udoo/neo/readme.txt b/board/udoo/neo/readme.txt new file mode 100644 index 0000000000..f037ad484a --- /dev/null +++ b/board/udoo/neo/readme.txt @@ -0,0 +1,16 @@ +MX6X Udoo Neo board + +http://www.udoo.org/udoo-neo/ + +To build a minimal support for these boards: + + $ make mx6sx_udoo_neo_defconfig + $ make + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be dumped on an SD card: + +dd if=output/images/sdcard.img of=/dev/ + +For details about the medium image layout, see the definition in +board/udoo/neo/genimage.cfg. diff --git a/configs/mx6sx_udoo_neo_defconfig b/configs/mx6sx_udoo_neo_defconfig new file mode 100644 index 0000000000..cbea577344 --- /dev/null +++ b/configs/mx6sx_udoo_neo_defconfig @@ -0,0 +1,29 @@ +BR2_arm=y +BR2_cortex_a9=y +# Linux headers same as kernel, a 4.9 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/udoo/neo/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/udoo/neo/post-image.sh" +BR2_GLOBAL_PATCH_DIR="board/udoo/neo/patches" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="udoo_neo" +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.11" +BR2_TARGET_UBOOT_FORMAT_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="SPL" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9" +BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-udoo-neo-basic imx6sx-udoo-neo-full imx6sx-udoo-neo-extended" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +# required tools to create the SD card image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y