From: Eric Anholt Date: Wed, 19 Aug 2020 22:23:24 +0000 (-0700) Subject: ci/bare-metal: Convert the main cros-servo boot code to python X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=c63648121e189945e04c4a9963aaeb46db9403ec;p=mesa.git ci/bare-metal: Convert the main cros-servo boot code to python Switching this part to python makes the code clearer and cleans up our logs as well. Part-of: --- diff --git a/.gitlab-ci/bare-metal/cros-servo.sh b/.gitlab-ci/bare-metal/cros-servo.sh index 160d82f412a..6de59d97a68 100755 --- a/.gitlab-ci/bare-metal/cros-servo.sh +++ b/.gitlab-ci/bare-metal/cros-servo.sh @@ -64,39 +64,12 @@ rm -rf /tftp/* cp $BM_KERNEL /tftp/vmlinuz echo "$BM_CMDLINE" > /tftp/cmdline -# Start watching serials, and power up the device. -python3 $BM/serial_buffer.py \ - --dev $BM_SERIAL_EC \ - --file serial-ec-output.txt \ - --prefix "SERIAL-EC> " & -python3 $BM/serial_buffer.py \ - --dev $BM_SERIAL \ - --file serial-output.txt \ - --prefix "SERIAL-CPU> " & - -while [ ! -e serial-output.txt ]; do - sleep 1 -done -# Flush any partial commands in the EC's prompt, then ask for a reboot. -$BM/write-serial.py $BM_SERIAL_EC "" -$BM/write-serial.py $BM_SERIAL_EC reboot - -# This is emitted right when the bootloader pauses to check for input. Emit a -# ^N character to request network boot, because we don't have a -# direct-to-netboot firmware on cheza. -$BM/expect-output.sh serial-output.txt -f "load_archive: loading locale_en.bin" -$BM/write-serial.py $BM_SERIAL `printf '\016'` - -# Wait for the device to complete the deqp run -$BM/expect-output.sh serial-output.txt \ - -f "bare-metal result" \ - -e "---. end Kernel panic" \ - -e "POWER_GOOD not seen in time" - -# power down the CPU on the device -$BM/write-serial.py $BM_SERIAL_EC 'power off' - -set -ex +set +e +python3 $BM/cros_servo_run.py \ + --cpu $BM_SERIAL \ + --ec $BM_SERIAL_EC +ret=$? +set -e # Bring artifacts back from the NFS dir to the build dir where gitlab-runner # will look for them. Note that results/ may already exist, so be careful @@ -104,9 +77,4 @@ set -ex mkdir -p results cp -Rp /nfs/results/. results/ -set +e -if grep -q "bare-metal result: pass" serial-output.txt; then - exit 0 -else - exit 1 -fi +exit $ret diff --git a/.gitlab-ci/bare-metal/cros_servo_run.py b/.gitlab-ci/bare-metal/cros_servo_run.py new file mode 100755 index 00000000000..0c43419854f --- /dev/null +++ b/.gitlab-ci/bare-metal/cros_servo_run.py @@ -0,0 +1,87 @@ +#!/usr/bin/env python3 +# +# Copyright © 2020 Google LLC +# +# Permission is hereby granted, free of charge, to any person obtaining a +# copy of this software and associated documentation files (the "Software"), +# to deal in the Software without restriction, including without limitation +# the rights to use, copy, modify, merge, publish, distribute, sublicense, +# and/or sell copies of the Software, and to permit persons to whom the +# Software is furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice (including the next +# paragraph) shall be included in all copies or substantial portions of the +# Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +# IN THE SOFTWARE. + +import argparse +import re +from serial_buffer import SerialBuffer +import sys + +class CrosServoRun: + def __init__(self, cpu, ec): + self.ec_ser = SerialBuffer(ec, "artifacts/serial-ec.txt", "R SERIAL-EC> ") + self.cpu_ser = SerialBuffer(cpu, "artifacts/serial.txt", "R SERIAL-CPU> ") + + def ec_write(self, s): + print("W SERIAL-EC> %s" % s) + self.ec_ser.serial.write(s.encode()) + + def cpu_write(self, s): + print("W SERIAL-CPU> %s" % s) + self.cpu_ser.serial.write(s.encode()) + + def run(self): + # Flush any partial commands in the EC's prompt, then ask for a reboot. + self.ec_write("\n") + self.ec_write("reboot\n") + + # This is emitted right when the bootloader pauses to check for input. + # Emit a ^N character to request network boot, because we don't have a + # direct-to-netboot firmware on cheza. + for line in self.cpu_ser.lines(): + if re.match("load_archive: loading locale_en.bin", line): + self.cpu_write("\016") + break + + for line in self.cpu_ser.lines(): + if re.match("---. end Kernel panic", line): + return 1 + if re.match("POWER_GOOD not seen in time", line): + return 1 + + result = re.match("bare-metal result: (\S*)", line) + if result: + if result.group(1) == "pass": + return 0 + else: + return 1 + + print("Reached the end of the CPU serial log without finding a result") + return 1 + +def main(): + parser = argparse.ArgumentParser() + parser.add_argument('--cpu', type=str, help='CPU Serial device', required=True) + parser.add_argument('--ec', type=str, help='EC Serial device', required=True) + args = parser.parse_args() + + servo = CrosServoRun(args.cpu, args.ec) + + retval = servo.run() + + # power down the CPU on the device + servo.ec_write("power off\n") + + sys.exit(retval) + +if __name__ == '__main__': + main() diff --git a/.gitlab-ci/bare-metal/write-serial.py b/.gitlab-ci/bare-metal/write-serial.py deleted file mode 100755 index 6a57ea754af..00000000000 --- a/.gitlab-ci/bare-metal/write-serial.py +++ /dev/null @@ -1,11 +0,0 @@ -#!/usr/bin/python3 - -import sys -import serial - -dev = sys.argv[1] -command = sys.argv[2] + '\n' - -ser = serial.Serial(dev, 115200, timeout=5) -ser.write(command.encode()) -ser.close()