From: K. Richard Pixley Date: Mon, 13 Sep 1993 22:12:16 +0000 (+0000) Subject: collect some remote things into remote-utils X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=c6f494e8be29c3acc11d8d7557fb29f3d700a69d;p=binutils-gdb.git collect some remote things into remote-utils --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index e7430b85432..014bd59d9d7 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,50 @@ +Mon Sep 13 14:14:35 1993 K. Richard Pixley (rich@sendai.cygnus.com) + + Collect some remote things into remote-utils. + * remote-utils.[ch]: new files of functions collected from several + different remote targets. + * Makefile.in (REMOTE_O): add remote-utils.o. + (dcache_h, remote_utils_h): new macros. + (HFILES): add $(remote_utils_h). + (ALLDEPFILES): add $(remote_utils_h). + (dcache.o): new rule. + (main.o, remote-bug.o): also depend on $(remote_utils_h). + * target.h (remote_debug): extern moved to remote-utils.h. + * target.c (find_default_run_target, find_core_target): initialize + runable. + (remote_debug): moved to remote-utils.c. + (_initialize_targets): move declaration of user variable + remotedebug to remote-utils.c. + * remote-bug.c: include remote-utils.h rather than dcache.h. + (bug_close, bug_write, bug_write_cr, desc, bug_dcache, timeout, + dev_name, check_open, is_open, readchar, readchar_nofail, + pollchar, expect, expect_prompt, get_hex_digit, get_hex_byte, + get_hex_word, bug_kill, bug_detach, bug_create_inferior, + multi-scan, bug_prepare_to_store, bug_fetch_word, + bug_store_word, bug_files_info, bug_mourn, bug_com, bug_device, + bug_speed): removed and replaced with facilities from + remote-utils.[ch]. + (bug_read_inferior_memory): renamed to bug_read_memory. + (bug_write_inferior_memory): renamed to bug_write_memory. + (bug_xfer_inferior_memory): renamed to bug_xfer_memory. + (get_word): comment out this unused function for now. + (bug_settings, cpu_check_strings): new statics. + (bug_open): rewritten to use gr_open. + (_initialize_remote_bug): remove declarations of commands bug, + device, speed. + * main.c: include remote-utils.h. + (baud_rate): removed to remote-utils.c. + (main): handle baud rate settings using new facilities from + remote-utils. + * defs.h (baud_rate): removed extern. + + m88110 support via bug-197 monitor. + * remote-bug.c (get_reg_name, bug_fetch_register, + bug_store_register): added m88110 extended register support. + (wait_strings): added bug-197 prompt. + (bug_wait): cope with bug-197 prompt. + (start_load): cope with either bug-197 or bug-187 prompt. + Mon Sep 13 12:53:09 1993 Jim Kingdon (kingdon@cirdan.cygnus.com) * inferior.h, infrun.c, thread.c, infcmd.c: Remove all uses of diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 377e134dbf2..0dd15847677 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -189,7 +189,7 @@ SER_HARDWIRE=ser-unix.o # The `remote' debugging target is supported for most architectures, # but not all (e.g. 960) -REMOTE_O = remote.o dcache.o +REMOTE_O = remote.o dcache.o remote-utils.o # Host and target-dependent makefile fragments come in here. #### @@ -322,6 +322,9 @@ SFILES_KGDB = $(SFILES) stuff.c kdb-start.c #wait_h = $(INCLUDE_DIR)/wait.h #dis-asm_h = $(INCLUDE_DIR)/dis-asm.h +dcache_h = dcache.h +remote_utils_h = $(dcache_h) remote-utils.h + readline_headers = \ $(READLINE_SRC)/chardefs.h \ $(READLINE_SRC)/history.h \ @@ -372,7 +375,8 @@ HFILES = buildsym.h call-cmds.h defs.h environ.h $(gdbcmd_h) \ nindy-share/env.h nindy-share/stop.h \ vx-share/dbgRpcLib.h vx-share/ptrace.h vx-share/vxTypes.h \ vx-share/vxWorks.h vx-share/wait.h vx-share/xdr_ld.h \ - vx-share/xdr_ptrace.h vx-share/xdr_rdb.h thread.h $(dcache_h) + vx-share/xdr_ptrace.h vx-share/xdr_rdb.h thread.h \ + $(remote_utils_h) # GDB "info" files, which should be included in their entirety INFOFILES = gdb.info* @@ -813,7 +817,8 @@ ALLDEPFILES = 29k-share/udi/udip2soc.c 29k-share/udi/udr.c \ nindy-share/ttyflush.c nindy-tdep.c \ ns32k-pinsn.c paread.c procfs.c pyr-pinsn.c pyr-tdep.c pyr-xdep.c \ remote-adapt.c remote-bug.c remote-eb.c remote-es.c remote-hms.c remote-mips.c \ - remote-mm.c remote-mon.c remote-nindy.c remote-sim.c remote-st.c \ + remote-mm.c remote-mon.c remote-nindy.c remote-sim.c \ + remote-st.c remote-utils.c dcache.c \ remote-udi.c remote-vx.c remote-z8k.c rs6000-nat.c rs6000-pinsn.c \ rs6000-tdep.c ser-go32.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \ sparc-pinsn.c sparc-tdep.c sun3-nat.c sun386-nat.c symm-tdep.c \ @@ -854,8 +859,8 @@ ALLPARAM = config/a29k/nm-ultra3.h config/a29k/tm-a29k.h \ config/m68k/tm-amix.h config/m68k/tm-delta68.h \ config/m68k/tm-dpx2.h config/m68k/tm-es1800.h \ config/m68k/tm-hp300bsd.h config/m68k/tm-hp300hpux.h \ - config/m68k/tm-isi.h config/m68k/tm-m68k-fp.h \ - config/m68k/tm-m68k-nofp.h config/m68k/tm-monitor.h \ + config/m68k/tm-isi.h config/m68k/tm-m68k-em.h \ + config/m68k/tm-monitor.h \ config/m68k/tm-news.h config/m68k/tm-os68k.h config/m68k/tm-st2000.h \ config/m68k/tm-sun2.h config/m68k/tm-sun2os4.h config/m68k/tm-sun3.h \ config/m68k/tm-sun3os4.h config/m68k/tm-vx68.h config/m68k/xm-3b1.h \ @@ -915,7 +920,7 @@ ALLCONFIG = config/a29k/a29k-kern.mt config/a29k/a29k-udi.mt \ config/m68k/es1800.mt config/m68k/hp300bsd.mh \ config/m68k/hp300bsd.mt config/m68k/hp300hpux.mh \ config/m68k/hp300hpux.mt config/m68k/isi.mh config/m68k/isi.mt \ - config/m68k/m68k-fp.mt config/m68k/m68k-nofp.mt \ + config/m68k/m68k-em.mt \ config/m68k/monitor.mt \ config/m68k/news.mh config/m68k/news.mt config/m68k/news1000.mh \ config/m68k/os68k.mt config/m68k/st2000.mt config/m68k/sun2os3.mh \ @@ -1021,6 +1026,8 @@ dbxread.o: dbxread.c $(breakpoint_h) buildsym.h $(command_h) \ $(gdbtypes_h) language.h objfiles.h partial-stab.h stabsread.h \ symfile.h $(symtab_h) target.h +dcache.o: dcache.c $(dcache_h) + delta68-nat.o: delta68-nat.c $(defs_h) demangle.o: demangle.c $(defs_h) $(gdbcmd_h) @@ -1128,7 +1135,8 @@ m88k-pinsn.o: m88k-pinsn.c $(defs_h) $(symtab_h) m88k-tdep.o: m88k-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) main.o: main.c $(bfd_h) $(getopt_h) $(readline_headers) call-cmds.h \ - $(defs_h) $(gdbcmd_h) $(inferior_h) language.h signals.h target.h + $(defs_h) $(gdbcmd_h) $(inferior_h) language.h signals.h \ + target.h $(remote_utils_h) $(CC) -c $(INTERNAL_CFLAGS) $(READLINE_CFLAGS) $(srcdir)/main.c maint.o: maint.c $(defs_h) $(gdbcmd_h) $(gdbtypes_h) $(symtab_h) @@ -1198,7 +1206,7 @@ remote-adapt.o: remote-adapt.c $(wait_h) $(defs_h) $(gdbcore_h) \ $(inferior_h) target.h terminal.h remote-bug.o: remote-bug.c $(wait_h) $(defs_h) $(gdbcore_h) \ - $(inferior_h) target.h terminal.h $(dcache_h) + $(inferior_h) target.h terminal.h $(remote_utils_h) remote-eb.o: remote-eb.c $(wait_h) $(srcdir)/config/a29k/tm-a29k.h \ $(defs_h) $(gdbcore_h) $(inferior_h) symfile.h target.h terminal.h diff --git a/gdb/defs.h b/gdb/defs.h index fcfea6ca6cb..f7b3d6129cd 100644 --- a/gdb/defs.h +++ b/gdb/defs.h @@ -353,9 +353,6 @@ extern char *current_directory; extern unsigned input_radix; extern unsigned output_radix; -/* Baud rate specified for communication with serial target systems. */ -extern char *baud_rate; - /* Possibilities for prettyprint parameters to routines which print things. Like enum language, this should be in value.h, but needs to be here for the same reason. FIXME: If we can eliminate this diff --git a/gdb/remote-bug.c b/gdb/remote-bug.c index da4f0e246e7..2c06f6b641a 100644 --- a/gdb/remote-bug.c +++ b/gdb/remote-bug.c @@ -38,7 +38,7 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "serial.h" #include "gdbcmd.h" -#include "dcache.h" +#include "remote-utils.h" extern int sleep(); @@ -49,27 +49,16 @@ extern int stop_soon_quietly; /* for wait_for_inferior */ extern struct target_ops bug_ops; /* Forward declaration */ /* Forward function declarations */ - static int bug_clear_breakpoints PARAMS((void)); -static void bug_close PARAMS((int quitting)); -static void bug_write_cr PARAMS((char *string)); -static int bug_read_inferior_memory PARAMS((CORE_ADDR memaddr, +static int bug_read_memory PARAMS((CORE_ADDR memaddr, unsigned char *myaddr, int len)); -static int bug_write_inferior_memory PARAMS((CORE_ADDR memaddr, +static int bug_write_memory PARAMS((CORE_ADDR memaddr, unsigned char *myaddr, int len)); -/* This is the serial descriptor to our target. */ - -static serial_t desc = NULL; - -/* This is our data cache. */ - -static DCACHE *bug_dcache; - /* This variable is somewhat arbitrary. It's here so that it can be set from within a running gdb. */ @@ -111,184 +100,6 @@ static int srec_sleep = 0; static int srec_noise = 0; -/*********************************************************************** - * I/O stuff stolen from remote-eb.c - ***********************************************************************/ - -/* with a timeout of 2, we time out waiting for the prompt after an - s-record dump. */ -static int timeout = 4; - -static const char *dev_name; - -/* Descriptor for I/O to remote machine. Initialize it to -1 so that - bug_open knows that we don't have a file open when the program - starts. */ - -static int is_open = 0; -static int -check_open () -{ - if (!is_open) - { - error ("remote device not open"); - } - - return(1); -} - -#define ON 1 -#define OFF 0 - -/* Read a character from the remote system, doing all the fancy - timeout stuff. */ -static int -readchar () -{ - int buf; - - buf = SERIAL_READCHAR (desc, timeout); - - if (buf == SERIAL_TIMEOUT) - error ("Timeout reading from remote system."); - - if (remote_debug) - printf ("%c", buf); - - return buf & 0x7f; -} - -static int -readchar_nofail () -{ - int buf; - - buf = SERIAL_READCHAR (desc, timeout); - if (buf == SERIAL_TIMEOUT) - buf = 0; - if (remote_debug) - if (buf) - printf ("%c", buf); - else - printf (""); - - return buf & 0x7f; - -} - -static int -pollchar() -{ - int buf; - - buf = SERIAL_READCHAR (desc, 0); - if (buf == SERIAL_TIMEOUT) - buf = 0; - if (remote_debug) - if (buf) - printf ("%c", buf); - else - printf (""); - - return buf & 0x7f; -} - -/* Keep discarding input from the remote system, until STRING is found. - Let the user break out immediately. */ -static void -expect (string) - char *string; -{ - char *p = string; - - immediate_quit = 1; - for (;;) - { - if (readchar () == *p) - { - p++; - if (*p == '\0') - { - immediate_quit = 0; - return; - } - } - else - p = string; - } -} - -/* Keep discarding input until we see the bug prompt. - - The convention for dealing with the prompt is that you - o give your command - o *then* wait for the prompt. - - Thus the last thing that a procedure does with the serial line - will be an expect_prompt(). Exception: bug_resume does not - wait for the prompt, because the terminal is being handed over - to the inferior. However, the next thing which happens after that - is a bug_wait which does wait for the prompt. - Note that this includes abnormal exit, e.g. error(). This is - necessary to prevent getting into states from which we can't - recover. */ -static void -expect_prompt () -{ - expect ("Bug>"); -} - -/* Get a hex digit from the remote system & return its value. - If ignore_space is nonzero, ignore spaces (not newline, tab, etc). */ -static int -get_hex_digit (ignore_space) - int ignore_space; -{ - int ch; - - for (;;) - { - ch = readchar (); - if (ch >= '0' && ch <= '9') - return ch - '0'; - else if (ch >= 'A' && ch <= 'F') - return ch - 'A' + 10; - else if (ch >= 'a' && ch <= 'f') - return ch - 'a' + 10; - else if (ch != ' ' || !ignore_space) - { - expect_prompt (); - error ("Invalid hex digit from remote system."); - } - } -} - -/* Get a byte from bug_desc and put it in *BYT. Accept any number - leading spaces. */ -static void -get_hex_byte (byt) - char *byt; -{ - int val; - - val = get_hex_digit (1) << 4; - val |= get_hex_digit (0); - *byt = val; -} - -/* Read a 32-bit hex word from the bug, preceded by a space */ -static long -get_hex_word () -{ - long val; - int j; - - val = 0; - for (j = 0; j < 8; j++) - val = (val << 4) + get_hex_digit (j == 0); - return val; -} - /* Called when SIGALRM signal sent due to alarm() timeout. */ /* Number of SIGTRAPs we need to simulate. That is, the next @@ -297,14 +108,6 @@ get_hex_word () static int need_artificial_trap = 0; -void -bug_kill (arg, from_tty) - char *arg; - int from_tty; -{ - -} - /* * Download a file specified in 'args', to the bug. */ @@ -318,9 +121,9 @@ bug_load (args, fromtty) asection *s; char buffer[1024]; - check_open (); + sr_check_open (); - dcache_flush (bug_dcache); + dcache_flush (gr_get_dcache()); inferior_pid = 0; abfd = bfd_openr (args, 0); if (!abfd) @@ -352,7 +155,7 @@ bug_load (args, fromtty) srec_frame = s->_raw_size - i; bfd_get_section_contents (abfd, s, buffer, i, srec_frame); - bug_write_inferior_memory (s->vma + i, buffer, srec_frame); + bug_write_memory (s->vma + i, buffer, srec_frame); printf_filtered ("*"); fflush (stdout); } @@ -362,39 +165,11 @@ bug_load (args, fromtty) s = s->next; } sprintf (buffer, "rs ip %lx", (unsigned long) abfd->start_address); - bug_write_cr (buffer); - expect_prompt (); -} - -/* This is called not only when we first attach, but also when the - user types "run" after having attached. */ -void -bug_create_inferior (execfile, args, env) - char *execfile; - char *args; - char **env; -{ - int entry_pt; - - if (args && *args) - error ("Can't pass arguments to remote bug process."); - - if (execfile == 0 || exec_bfd == 0) - error ("No exec file specified"); - - entry_pt = (int) bfd_get_start_address (exec_bfd); - check_open (); - - bug_kill (NULL, NULL); - bug_clear_breakpoints (); - init_wait_for_inferior (); - bug_write_cr (""); - expect_prompt (); - - insert_breakpoints (); /* Needed to get correct instruction in cache */ - proceed (entry_pt, -1, 0); + sr_write_cr (buffer); + gr_expect_prompt (); } +#if 0 static char * get_word (p) char **p; @@ -423,72 +198,47 @@ get_word (p) *p = s; return copy; } +#endif -static int baudrate = 9600; - -static void -bug_open (name, from_tty) - char *name; - int from_tty; -{ - push_target (&bug_ops); - - if (name == 0) - { - name = ""; - } - if (is_open) - bug_close (0); - dev_name = strdup (name); - - if (!(desc = SERIAL_OPEN (dev_name))) - perror_with_name ((char *) dev_name); - - SERIAL_RAW (desc); - is_open = 1; - - bug_dcache = dcache_init (bug_read_inferior_memory, bug_write_inferior_memory); - - /* Hello? Are you there? */ - SERIAL_WRITE (desc, "\r", 1); - expect_prompt (); - - /* Clear any break points */ - bug_clear_breakpoints (); - - printf_filtered ("Connected to remote 187bug system.\n"); -} +static struct gr_settings bug_settings = { + NULL, /* dcache */ + "Bug>", /* prompt */ + &bug_ops, /* ops */ + bug_clear_breakpoints, /* clear_all_breakpoints */ + bug_read_memory, /* readfunc */ + bug_write_memory, /* writefunc */ + gr_generic_checkin, /* checkin */ +}; -/* Close out all files and local state before this target loses control. */ +static char *cpu_check_strings[] = { + "=", + "Invalid Register", +}; static void -bug_close (quitting) - int quitting; -{ - /* Clear any break points */ - bug_clear_breakpoints (); - - if (is_open) - SERIAL_CLOSE (desc); - - is_open = 0; -} - -/* Terminate the open connection to the remote debugger. - Use this when you want to detach and do something else - with your gdb. */ -void -bug_detach (args, from_tty) +bug_open (args, from_tty) char *args; int from_tty; { - if (is_open) - bug_clear_breakpoints (); + if (args == NULL) + args = ""; - pop_target (); /* calls bug_close to do the real work */ + gr_open(args, from_tty, &bug_settings); + /* decide *now* whether we are on an 88100 or an 88110 */ + sr_write_cr("rs cr06"); + sr_expect("rs cr06"); - if (from_tty) - printf_filtered ("Ending remote %s debugging\n", target_shortname); + switch (sr_multi_scan(cpu_check_strings, 0)) + { + case 0: /* this is an m88100 */ + target_is_m88110 = 0; + break; + case 1: /* this is an m88110 */ + target_is_m88110 = 1; + break; + default: + abort(); + } } /* Tell the remote machine to resume. */ @@ -497,11 +247,11 @@ void bug_resume (pid, step, sig) int pid, step, sig; { - dcache_flush (bug_dcache); + dcache_flush (gr_get_dcache()); if (step) { - bug_write_cr("t"); + sr_write_cr("t"); /* Force the next bug_wait to return a trap. Not doing anything about I/O from the target means that the user has to type @@ -509,102 +259,11 @@ bug_resume (pid, step, sig) need_artificial_trap = 1; } else - bug_write_cr ("g"); + sr_write_cr ("g"); return; } -/* Given a null terminated list of strings LIST, read the input until we find one of - them. Return the index of the string found or -1 on error. '?' means match - any single character. Note that with the algorithm we use, the initial - character of the string cannot recur in the string, or we will not find some - cases of the string in the input. If PASSTHROUGH is non-zero, then - pass non-matching data on. */ - -static int -multi_scan (list, passthrough) - char *list[]; - int passthrough; -{ - char *swallowed = NULL; /* holding area */ - char *swallowed_p = swallowed; /* Current position in swallowed. */ - int ch; - int ch_handled; - int i; - int string_count; - int max_length; - char **plist; - - /* Look through the strings. Count them. Find the largest one so we can - allocate a holding area. */ - - for (max_length = string_count = i = 0; - list[i] != NULL; - ++i, ++string_count) - { - int length = strlen(list[i]); - - if (length > max_length) - max_length = length; - } - - /* if we have no strings, then something is wrong. */ - if (string_count == 0) - return(-1); - - /* otherwise, we will need a holding area big enough to hold almost two - copies of our largest string. */ - swallowed_p = swallowed = alloca(max_length << 1); - - /* and a list of pointers to current scan points. */ - plist = alloca(string_count * sizeof(*plist)); - - /* and initialize */ - for (i = 0; i < string_count; ++i) - plist[i] = list[i]; - - for (ch = readchar(); /* loop forever */ ; ch = readchar()) - { - QUIT; /* Let user quit and leave process running */ - ch_handled = 0; - - for (i = 0; i < string_count; ++i) - { - if (ch == *plist[i] || *plist[i] == '?') - { - ++plist[i]; - if (*plist[i] == '\0') - return(i); - - if (!ch_handled) - *swallowed_p++ = ch; - - ch_handled = 1; - } - else - plist[i] = list[i]; - } - - if (!ch_handled) - { - char *p; - - /* Print out any characters which have been swallowed. */ - if (passthrough) - { - for (p = swallowed; p < swallowed_p; ++p) - putc (*p, stdout); - - putc (ch, stdout); - } - - swallowed_p = swallowed; - } - } - - return(-1); -} - /* Wait until the remote machine stops, then return, storing status in STATUS just as `wait' would. */ @@ -612,6 +271,7 @@ static char *wait_strings[] = { "At Breakpoint", "Exception: Data Access Fault (Local Bus Timeout)", "\r8???-Bug>", + "\r197-Bug>", NULL, }; @@ -619,7 +279,7 @@ int bug_wait (status) WAITTYPE *status; { - int old_timeout = timeout; + int old_timeout = sr_get_timeout(); int old_immediate_quit = immediate_quit; WSETEXIT ((*status), 0); @@ -628,29 +288,30 @@ bug_wait (status) back out as stdout. */ if (need_artificial_trap == 0) { - expect("Effective address: "); - (void) get_hex_word(); - expect ("\r\n"); + sr_expect("Effective address: "); + (void) sr_get_hex_word(); + sr_expect ("\r\n"); } - timeout = -1; /* Don't time out -- user program is running. */ + sr_set_timeout(-1); /* Don't time out -- user program is running. */ immediate_quit = 1; /* Helps ability to QUIT */ - switch (multi_scan(wait_strings, need_artificial_trap == 0)) + switch (gr_multi_scan(wait_strings, need_artificial_trap == 0)) { case 0: /* breakpoint case */ WSETSTOP ((*status), SIGTRAP); /* user output from the target can be discarded here. (?) */ - expect_prompt(); + gr_expect_prompt(); break; case 1: /* bus error */ WSETSTOP ((*status), SIGBUS); /* user output from the target can be discarded here. (?) */ - expect_prompt(); + gr_expect_prompt(); break; case 2: /* normal case */ + case 3: if (need_artificial_trap != 0) { /* stepping */ @@ -672,7 +333,7 @@ bug_wait (status) break; } - timeout = old_timeout; + sr_set_timeout(old_timeout); immediate_quit = old_immediate_quit; return 0; } @@ -700,38 +361,16 @@ get_reg_name (regno) /* 35 = sxip */ "cr05", /* 36 = snip */ "cr06", /* 37 = sfip */ + + "x00", "x01", "x02", "x03", "x04", "x05", "x06", "x07", + "x08", "x09", "x10", "x11", "x12", "x13", "x14", "x15", + "x16", "x17", "x18", "x19", "x20", "x21", "x22", "x23", + "x24", "x25", "x26", "x27", "x28", "x29", "x30", "x31", }; return rn[regno]; } -static int -bug_write (a, l) - char *a; - int l; -{ - int i; - - SERIAL_WRITE (desc, a, l); - - if (remote_debug) - for (i = 0; i < l; i++) - { - printf ("%c", a[i]); - } - - return(0); -} - -static void -bug_write_cr (s) - char *s; -{ - bug_write (s, strlen (s)); - bug_write ("\r", 1); - return; -} - #if 0 /* not currently used */ /* Read from remote while the input matches STRING. Return zero on success, -1 on failure. */ @@ -744,7 +383,7 @@ bug_scan (s) while (*s) { - c = readchar(); + c = sr_readchar(); if (c != *s++) { fflush(stdout); @@ -766,16 +405,16 @@ bug_srec_write_cr (s) if (srec_echo_pace) for (p = s; *p; ++p) { - if (remote_debug) + if (sr_get_debug() > 0) printf ("%c", *p); do - SERIAL_WRITE(desc, p, 1); - while (readchar_nofail() != *p); + SERIAL_WRITE(sr_get_desc(), p, 1); + while (sr_pollchar() != *p); } else { - bug_write_cr (s); + sr_write_cr (s); /* return(bug_scan (s) || bug_scan ("\n")); */ } @@ -789,7 +428,8 @@ bug_fetch_register(regno) int regno; { REGISTER_TYPE regval; - check_open(); + + sr_check_open(); if (regno == -1) { @@ -798,13 +438,13 @@ bug_fetch_register(regno) for (i = 0; i < NUM_REGS; ++i) bug_fetch_register(i); } - else + else if (regno < XFP_REGNUM) { - bug_write("rs ", 3); - bug_write_cr(get_reg_name(regno)); - expect("="); - regval = get_hex_word(); - expect_prompt(); + sr_write("rs ", 3); + sr_write_cr(get_reg_name(regno)); + sr_expect("="); + regval = sr_get_hex_word(); + gr_expect_prompt(); /* the following registers contain flag bits in the lower to bit slots. Mask them off */ @@ -815,6 +455,48 @@ bug_fetch_register(regno) supply_register(regno, (char *) ®val); } + else + { + /* Float register so we need to parse a strange data format. */ + long p; + unsigned char value[10]; + + sr_write("rs ", 3); + sr_write(get_reg_name(regno), strlen(get_reg_name(regno))); + sr_write_cr(";d"); + sr_expect("rs"); + sr_expect(get_reg_name(regno)); + sr_expect(";d"); + sr_expect("="); + + /* sign */ + p = sr_get_hex_digit(1); + value[0] = p << 7; + + /* exponent */ + sr_expect("_"); + p = sr_get_hex_digit(1); + value[0] += (p << 4); + value[0] += sr_get_hex_digit(1); + + value[1] = sr_get_hex_digit(1) << 4; + + /* fraction */ + sr_expect("_"); + value[1] += sr_get_hex_digit(1); + + value[2] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1); + value[3] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1); + value[4] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1); + value[5] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1); + value[6] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1); + value[7] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1); + value[8] = 0; + value[9] = 0; + + gr_expect_prompt(); + supply_register(regno, value); + } return; } @@ -826,7 +508,7 @@ bug_store_register (regno) int regno; { char buffer[1024]; - check_open(); + sr_check_open(); if (regno == -1) { @@ -839,54 +521,42 @@ bug_store_register (regno) { char *regname; - regname = (get_reg_name(regno)); + regname = get_reg_name(regno); - sprintf(buffer, "rs %s %08x", - regname, - read_register(regno)); + if (regno < XFP_REGNUM) + sprintf(buffer, "rs %s %08x", + regname, + read_register(regno)); + else + { + unsigned char *value = ®isters[REGISTER_BYTE(regno)]; + + sprintf(buffer, "rs %s %1x_%2x%1x_%1x%2x%2x%2x%2x%2x%2x", + regname, + /* sign */ + (value[0] >> 7) & 0xf, + /* exponent */ + value[0] & 0x7f, + (value[1] >> 8) & 0xf, + /* fraction */ + value[1] & 0xf, + value[2], + value[3], + value[4], + value[5], + value[6], + value[7]); + } - bug_write_cr(buffer); - expect_prompt(); + sr_write_cr(buffer); + gr_expect_prompt(); } return; } -/* Get ready to modify the registers array. On machines which store - individual registers, this doesn't need to do anything. On machines - which store all the registers in one fell swoop, this makes sure - that registers contains all the registers from the program being - debugged. */ - -void -bug_prepare_to_store () -{ - /* Do nothing, since we can store individual regs */ -} - -/* Read a word from remote address ADDR and return it. - * This goes through the data cache. - */ int -bug_fetch_word (addr) - CORE_ADDR addr; -{ - return dcache_fetch (bug_dcache, addr); -} - -/* Write a word WORD into remote address ADDR. - This goes through the data cache. */ - -void -bug_store_word (addr, word) - CORE_ADDR addr; - int word; -{ - dcache_poke (bug_dcache, addr, word); -} - -int -bug_xfer_inferior_memory (memaddr, myaddr, len, write, target) +bug_xfer_memory (memaddr, myaddr, len, write, target) CORE_ADDR memaddr; char *myaddr; int len; @@ -916,13 +586,13 @@ bug_xfer_inferior_memory (memaddr, myaddr, len, write, target) if (addr != memaddr || len < (int) sizeof (int)) { /* Need part of initial word -- fetch it. */ - buffer[0] = bug_fetch_word (addr); + buffer[0] = gr_fetch_word (addr); } if (count > 1) /* FIXME, avoid if even boundary */ { buffer[count - 1] - = bug_fetch_word (addr + (count - 1) * sizeof (int)); + = gr_fetch_word (addr + (count - 1) * sizeof (int)); } /* Copy data to be written over corresponding part of buffer */ @@ -934,7 +604,7 @@ bug_xfer_inferior_memory (memaddr, myaddr, len, write, target) for (i = 0; i < count; i++, addr += sizeof (int)) { errno = 0; - bug_store_word (addr, buffer[i]); + gr_store_word (addr, buffer[i]); if (errno) { @@ -949,7 +619,7 @@ bug_xfer_inferior_memory (memaddr, myaddr, len, write, target) for (i = 0; i < count; i++, addr += sizeof (int)) { errno = 0; - buffer[i] = bug_fetch_word (addr); + buffer[i] = gr_fetch_word (addr); if (errno) { return 0; @@ -971,9 +641,9 @@ start_load() command = (srec_echo_pace ? "lo 0 ;x" : "lo 0"); - bug_write_cr (command); - expect (command); - expect ("\r\n"); + sr_write_cr (command); + sr_expect (command); + sr_expect ("\r\n"); bug_srec_write_cr ("S0030000FC"); return; } @@ -993,12 +663,12 @@ start_load() static char *srecord_strings[] = { "S-RECORD", - "8???-Bug>", + "-Bug>", NULL, }; static int -bug_write_inferior_memory (memaddr, myaddr, len) +bug_write_memory (memaddr, myaddr, len) CORE_ADDR memaddr; unsigned char *myaddr; int len; @@ -1020,15 +690,15 @@ bug_write_inferior_memory (memaddr, myaddr, len) if (retries > 0) { - if (remote_debug) + if (sr_get_debug() > 0) printf("\n\n"); - /* This expect_prompt call is extremely important. Without + /* This gr_expect_prompt call is extremely important. Without it, we will tend to resend our packet so fast that it will arrive before the bug monitor is ready to receive it. This would lead to a very ugly resend loop. */ - expect_prompt(); + gr_expect_prompt(); } start_load(); @@ -1081,22 +751,22 @@ bug_write_inferior_memory (memaddr, myaddr, len) if (srec_sleep != 0) sleep(srec_sleep); - /* This pollchar is probably redundant to the multi_scan + /* This pollchar is probably redundant to the gr_multi_scan below. Trouble is, we can't be sure when or where an error message will appear. Apparently, when running at full speed from a typical sun4, error messages tend to appear to arrive only *after* the s7 record. */ - if ((x = pollchar()) != 0) + if ((x = sr_pollchar()) != 0) { - if (remote_debug) + if (sr_get_debug() > 0) printf("\n\n"); ++retries; /* flush any remaining input and verify that we are back at the prompt level. */ - expect_prompt(); + gr_expect_prompt(); /* start all over again. */ start_load(); done = 0; @@ -1111,28 +781,11 @@ bug_write_inferior_memory (memaddr, myaddr, len) /* Having finished the load, we need to figure out whether we had any errors. */ - } while (multi_scan(srecord_strings, 0) == 0);; + } while (gr_multi_scan(srecord_strings, 0) == 0);; return(0); } -void -bug_files_info () -{ - char *file = "nothing"; - - if (exec_bfd) - file = bfd_get_filename (exec_bfd); - - if (exec_bfd) -#ifdef __GO32__ - printf_filtered ("\tAttached to DOS asynctsr and running program %s\n", file); -#else - printf_filtered ("\tAttached to %s at %d baud and running program %s\n", dev_name, baudrate, file); -#endif - printf_filtered ("\ton an m88k processor.\n"); -} - /* Copy LEN bytes of data from debugger memory at MYADDR to inferior's memory at MEMADDR. Returns errno value. * sb/sh instructions don't work on unaligned addresses, when TU=1. @@ -1141,7 +794,7 @@ bug_files_info () /* Read LEN bytes from inferior memory at MEMADDR. Put the result at debugger address MYADDR. Returns errno value. */ static int -bug_read_inferior_memory (memaddr, myaddr, len) +bug_read_memory (memaddr, myaddr, len) CORE_ADDR memaddr; unsigned char *myaddr; int len; @@ -1156,23 +809,23 @@ bug_read_inferior_memory (memaddr, myaddr, len) unsigned int checksum; sprintf(request, "du 0 %x:&%d", memaddr, len); - bug_write_cr(request); + sr_write_cr(request); p = buffer = alloca(len); /* scan up through the header */ - expect("S0030000FC"); + sr_expect("S0030000FC"); while (p < buffer + len) { /* scan off any white space. */ - while (readchar() != 'S') ;; + while (sr_readchar() != 'S') ;; /* what kind of s-rec? */ - type = readchar(); + type = sr_readchar(); /* scan record size */ - get_hex_byte(&size); + sr_get_hex_byte(&size); checksum = size; --size; inaddr = 0; @@ -1185,23 +838,23 @@ bug_read_inferior_memory (memaddr, myaddr, len) goto done; case '3': - get_hex_byte(&c); + sr_get_hex_byte(&c); inaddr = (inaddr << 8) + c; checksum += c; --size; /* intentional fall through */ case '2': - get_hex_byte(&c); + sr_get_hex_byte(&c); inaddr = (inaddr << 8) + c; checksum += c; --size; /* intentional fall through */ case '1': - get_hex_byte(&c); + sr_get_hex_byte(&c); inaddr = (inaddr << 8) + c; checksum += c; --size; - get_hex_byte(&c); + sr_get_hex_byte(&c); inaddr = (inaddr << 8) + c; checksum += c; --size; @@ -1221,17 +874,17 @@ bug_read_inferior_memory (memaddr, myaddr, len) for (; size; --size, ++p) { - get_hex_byte(p); + sr_get_hex_byte(p); checksum += *p; } - get_hex_byte(&c); + sr_get_hex_byte(&c); if (c != (~checksum & 0xff)) error("bad s-rec checksum"); } done: - expect_prompt(); + gr_expect_prompt(); if (p != buffer + len) return(1); @@ -1246,7 +899,7 @@ bug_insert_breakpoint (addr, save) CORE_ADDR addr; char *save; /* Throw away, let bug save instructions */ { - check_open (); + sr_check_open (); if (num_brkpts < MAX_BREAKS) { @@ -1254,8 +907,8 @@ bug_insert_breakpoint (addr, save) num_brkpts++; sprintf (buffer, "br %x", addr); - bug_write_cr (buffer); - expect_prompt (); + sr_write_cr (buffer); + gr_expect_prompt (); return(0); } else @@ -1277,8 +930,8 @@ bug_remove_breakpoint (addr, save) num_brkpts--; sprintf (buffer, "nobr %x", addr); - bug_write_cr (buffer); - expect_prompt (); + sr_write_cr (buffer); + gr_expect_prompt (); } return (0); @@ -1289,103 +942,35 @@ static int bug_clear_breakpoints () { - if (is_open) + if (sr_is_open()) { - bug_write_cr ("nobr"); - expect("nobr"); - expect_prompt (); + sr_write_cr ("nobr"); + sr_expect("nobr"); + gr_expect_prompt (); } num_brkpts = 0; return(0); } -static void -bug_mourn () -{ - bug_clear_breakpoints (); - generic_mourn_inferior (); -} - -/* Put a command string, in args, out to the bug. The bug is assumed to - be in raw mode, all writing/reading done through desc. - Ouput from the bug is placed on the users terminal until the - prompt from the bug is seen. - FIXME: Can't handle commands that take input. */ - -void -bug_com (args, fromtty) - char *args; - int fromtty; -{ - check_open (); - - if (!args) - return; - - /* Clear all input so only command relative output is displayed */ - - bug_write_cr (args); - bug_write ("\030", 1); - expect_prompt (); -} - -static void -bug_device (args, fromtty) - char *args; - int fromtty; -{ - if (args) - dev_name = get_word (&args); - - return; -} - -#if 0 -static -bug_speed (s) - char *s; -{ - check_open (); - - if (s) - { - char buffer[100]; - int newrate = atoi (s); - int which = 0; - - if (SERIAL_SETBAUDRATE (desc, newrate)) - error ("Can't use %d baud\n", newrate); - - printf_filtered ("Checking target is in sync\n"); - - printf_filtered ("Sending commands to set target to %d\n", - baudrate); - - sprintf (buffer, "tm %d. N 8 1", baudrate); - bug_write_cr (buffer); - } -} -#endif /* 0 */ - struct target_ops bug_ops = { "bug", "Remote BUG monitor", "Use the mvme187 board running the BUG monitor connected\n\ by a serial line.", - bug_open, bug_close, - 0, bug_detach, bug_resume, bug_wait, /* attach */ + bug_open, gr_close, + 0, gr_detach, bug_resume, bug_wait, /* attach */ bug_fetch_register, bug_store_register, - bug_prepare_to_store, - bug_xfer_inferior_memory, - bug_files_info, + gr_prepare_to_store, + bug_xfer_memory, + gr_files_info, bug_insert_breakpoint, bug_remove_breakpoint, /* Breakpoints */ 0, 0, 0, 0, 0, /* Terminal handling */ - bug_kill, /* FIXME, kill */ + gr_kill, /* FIXME, kill */ bug_load, 0, /* lookup_symbol */ - bug_create_inferior, /* create_inferior */ - bug_mourn, /* mourn_inferior FIXME */ + gr_create_inferior, /* create_inferior */ + gr_mourn, /* mourn_inferior FIXME */ 0, /* can_run */ 0, /* notice_signals */ process_stratum, 0, /* next */ @@ -1399,17 +984,6 @@ _initialize_remote_bug () { add_target (&bug_ops); - add_com ("bug ", class_obscure, bug_com, - "Send a command to the BUG monitor."); - - add_com ("device", class_obscure, bug_device, - "Set the terminal line for BUG communications"); - -#if 0 - add_com ("speed", class_obscure, bug_speed, - "Set the terminal line speed for BUG communications"); -#endif /* 0 */ - add_show_from_set (add_set_cmd ("srec-bytes", class_support, var_uinteger, (char *) &srec_bytes, @@ -1465,6 +1039,4 @@ When on, use verification by echo when downloading S-records. This is\n\ much slower, but generally more reliable.", &setlist), &showlist); - - dev_name = NULL; } diff --git a/gdb/remote-utils.c b/gdb/remote-utils.c new file mode 100644 index 00000000000..0b570fda78b --- /dev/null +++ b/gdb/remote-utils.c @@ -0,0 +1,648 @@ +/* Generic support for remote debugging interfaces. + + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +/* This file actually contains two distinct logical "packages". They + are packaged together in this one file because they are typically + used together. + + The first package is an addition to the serial package. The + addition provides reading and writing with debugging output and + timeouts based on user settable variables. These routines are + intended to support serial port based remote backends. These + functions are prefixed with sr_. + + The second package is a collection of more or less generic + functions for use by remote backends. They support user settable + variables for debugging, retries, and the like. + + Todo: + + * a pass through mode a la kermit or telnet. + * autobaud. + * ask remote to change his baud rate. + * put generic load here. + + */ + +#include + +#include "defs.h" +#include "gdbcmd.h" +#include "target.h" +#include "serial.h" +#include "gdbcore.h" /* for exec_bfd */ +#include "inferior.h" /* for generic_mourn_inferior */ +#include "remote-utils.h" + +struct _sr_settings sr_settings = { + 0, /* debug */ + 9600, /* baud */ + 4, /* timeout: + remote-hms.c had 2 + remote-bug.c had "with a timeout of 2, we time out waiting for + the prompt after an s-record dump." + + remote.c had (2): This was 5 seconds, which is a long time to + sit and wait. Unless this is going though some terminal server + or multiplexer or other form of hairy serial connection, I + would think 2 seconds would be plenty. +*/ + + 10, /* retries */ + NULL, /* device */ + NULL, /* descriptor */ +}; + +struct gr_settings *gr_settings = NULL; + +static void +usage(proto, junk) + char *proto; + char *junk; +{ + if (junk != NULL) + fprintf(stderr, "Unrecognized arguments: `%s'.\n", junk); + + /* FIXME-now: service@host? */ + + error("Usage: target %s >>\n\ +or target %s \n", proto, proto); + + return; +} + +#define CHECKDONE(p, q) \ +{ \ + if (q == p) \ + { \ + if (*p == '\0') \ + return; \ + else \ + usage(proto, p); \ + } \ +} + +void +sr_scan_args(proto, args) + char *proto; + char *args; +{ + int n; + char *p, *q; + + extern int strtol(); + + /* if no args, then nothing to do. */ + if (args == NULL || *args == '\0') + return; + + /* scan off white space. */ + for (p = args; isspace(*p); ++p) ;; + + /* find end of device name. */ + for (q = p; *q != '\0' && !isspace(*q); ++q) ;; + + /* check for missing or empty device name. */ + CHECKDONE(p, q); + sr_set_device(savestring(p, q - p)); + + /* look for baud rate. */ + n = strtol(q, &p, 10); + + /* check for missing or empty baud rate. */ + CHECKDONE(p, q); + sr_set_baud_rate(n); + + /* look for debug value. */ + n = strtol(p, &q, 10); + + /* check for missing or empty debug value. */ + CHECKDONE(p, q); + sr_set_debug(n); + + /* scan off remaining white space. */ + for (p = q; isspace(*p); ++p) ;; + + /* if not end of string, then there's unrecognized junk. */ + if (*p != '\0') + usage(proto, p); + + return; +} + +void +gr_generic_checkin() +{ + sr_write_cr(""); + gr_expect_prompt(); +} + +void +gr_open(args, from_tty, gr) + char *args; + int from_tty; + struct gr_settings *gr; +{ + target_preopen(from_tty); + sr_scan_args(gr->ops->to_shortname, args); + unpush_target(gr->ops); + + gr_settings = gr; + + gr_set_dcache(dcache_init(gr->readfunc, gr->writefunc)); + + if (sr_get_desc() != NULL) + gr_close (0); + + sr_set_desc(SERIAL_OPEN (sr_get_device())); + if (!sr_get_desc()) + perror_with_name((char *) sr_get_device()); + + if (SERIAL_SETBAUDRATE(sr_get_desc(), sr_get_baud_rate()) != 0) + { + SERIAL_CLOSE(sr_get_desc()); + perror_with_name(sr_get_device()); + } + + SERIAL_RAW (sr_get_desc()); + + /* default retries */ + if (sr_get_retries() == 0) + sr_set_retries(1); + + /* default clear breakpoint function */ + if (gr_settings->clear_all_breakpoints == NULL) + gr_settings->clear_all_breakpoints = remove_breakpoints; + + if (from_tty) + printf_filtered ("Remote debugging using `%s' at baud rate of %d\n", + sr_get_device(), sr_get_baud_rate()); + + push_target(gr->ops); + gr_checkin(); + gr_clear_all_breakpoints (); + return; +} + +/* Read a character from the remote system masking it down to 7 bits + and doing all the fancy timeout stuff. */ + +int +sr_readchar () +{ + int buf; + + buf = SERIAL_READCHAR (sr_get_desc(), sr_get_timeout()); + + if (buf == SERIAL_TIMEOUT) + error ("Timeout reading from remote system."); + + if (sr_get_debug() > 0) + printf ("%c", buf); + + return buf & 0x7f; +} + +int +sr_pollchar() +{ + int buf; + + buf = SERIAL_READCHAR (sr_get_desc(), 0); + if (buf == SERIAL_TIMEOUT) + buf = 0; + if (sr_get_debug() > 0) + if (buf) + printf ("%c", buf); + else + printf (""); + + return buf & 0x7f; +} + +/* Keep discarding input from the remote system, until STRING is found. + Let the user break out immediately. */ +void +sr_expect (string) + char *string; +{ + char *p = string; + + immediate_quit = 1; + while (1) + { + if (sr_readchar () == *p) + { + p++; + if (*p == '\0') + { + immediate_quit = 0; + return; + } + } + else + p = string; + } +} + +void +sr_write (a, l) + char *a; + int l; +{ + int i; + + if (SERIAL_WRITE (sr_get_desc(), a, l) != 0) + perror_with_name ("sr_write: Error writing to remote"); + + if (sr_get_debug() > 0) + for (i = 0; i < l; i++) + printf ("%c", a[i]); + + return; +} + +void +sr_write_cr (s) + char *s; +{ + sr_write (s, strlen (s)); + sr_write ("\r", 1); + return; +} + +int +sr_timed_read (buf, n) + char *buf; + int n; +{ + int i; + char c; + + i = 0; + while (i < n) + { + c = sr_readchar (); + + if (c == 0) + return i; + buf[i] = c; + i++; + + } + return i; +} + +/* Get a hex digit from the remote system & return its value. If + ignore_space is nonzero, ignore spaces (not newline, tab, etc). */ + +int +sr_get_hex_digit (ignore_space) + int ignore_space; +{ + int ch; + + while (1) + { + ch = sr_readchar (); + if (ch >= '0' && ch <= '9') + return ch - '0'; + else if (ch >= 'A' && ch <= 'F') + return ch - 'A' + 10; + else if (ch >= 'a' && ch <= 'f') + return ch - 'a' + 10; + else if (ch != ' ' || !ignore_space) + { + gr_expect_prompt (); + error ("Invalid hex digit from remote system."); + } + } +} + +/* Get a byte from the remote and put it in *BYT. Accept any number + leading spaces. */ +void +sr_get_hex_byte (byt) + char *byt; +{ + int val; + + val = sr_get_hex_digit (1) << 4; + val |= sr_get_hex_digit (0); + *byt = val; +} + +/* Read a 32-bit hex word from the remote, preceded by a space */ +long +sr_get_hex_word () +{ + long val; + int j; + + val = 0; + for (j = 0; j < 8; j++) + val = (val << 4) + sr_get_hex_digit (j == 0); + return val; +} + +/* Put a command string, in args, out to the remote. The remote is assumed to + be in raw mode, all writing/reading done through desc. + Ouput from the remote is placed on the users terminal until the + prompt from the remote is seen. + FIXME: Can't handle commands that take input. */ + +void +sr_com (args, fromtty) + char *args; + int fromtty; +{ + sr_check_open (); + + if (!args) + return; + + /* Clear all input so only command relative output is displayed */ + + sr_write_cr (args); + sr_write ("\030", 1); + gr_expect_prompt (); +} + +void +gr_close(quitting) + int quitting; +{ + gr_clear_all_breakpoints(); + + if (sr_is_open()) + { + SERIAL_CLOSE (sr_get_desc()); + sr_set_desc(NULL); + } + + return; +} + +/* gr_detach() + takes a program previously attached to and detaches it. + We better not have left any breakpoints + in the program or it'll die when it hits one. + Close the open connection to the remote debugger. + Use this when you want to detach and do something else + with your gdb. */ + +void +gr_detach(args, from_tty) + char *args; + int from_tty; +{ + if (args) + error ("Argument given to \"detach\" when remotely debugging."); + + if (sr_is_open()) + gr_clear_all_breakpoints (); + + pop_target (); + if (from_tty) + puts_filtered ("Ending remote debugging.\n"); + + return; +} + +void +gr_files_info (ops) + struct target_ops *ops; +{ + char *file = "nothing"; + + if (exec_bfd) + file = bfd_get_filename (exec_bfd); + + if (exec_bfd) + { +#ifdef __GO32__ + printf_filtered ("\tAttached to DOS asynctsr\n"); +#else + printf_filtered ("\tAttached to %s at %d baud\n", + sr_get_device(), sr_get_baud_rate()); +#endif + } + + printf_filtered ("\tand running program %s\n", file); + printf_filtered ("\tusing the %s protocol.\n", ops->to_shortname); +} + +void +gr_mourn () +{ + gr_clear_all_breakpoints (); + unpush_target (gr_get_ops()); + generic_mourn_inferior (); +} + +void +gr_kill () +{ + return; +} + +/* This is called not only when we first attach, but also when the + user types "run" after having attached. */ +void +gr_create_inferior (execfile, args, env) + char *execfile; + char *args; + char **env; +{ + int entry_pt; + + if (args && *args) + error ("Can't pass arguments to remote process."); + + if (execfile == 0 || exec_bfd == 0) + error ("No exec file specified"); + + entry_pt = (int) bfd_get_start_address (exec_bfd); + sr_check_open (); + + gr_kill (); + gr_clear_all_breakpoints (); + + init_wait_for_inferior (); + gr_checkin(); + + insert_breakpoints (); /* Needed to get correct instruction in cache */ + proceed (entry_pt, -1, 0); +} + +/* Given a null terminated list of strings LIST, read the input until we find one of + them. Return the index of the string found or -1 on error. '?' means match + any single character. Note that with the algorithm we use, the initial + character of the string cannot recur in the string, or we will not find some + cases of the string in the input. If PASSTHROUGH is non-zero, then + pass non-matching data on. */ + +int +gr_multi_scan (list, passthrough) + char *list[]; + int passthrough; +{ + char *swallowed = NULL; /* holding area */ + char *swallowed_p = swallowed; /* Current position in swallowed. */ + int ch; + int ch_handled; + int i; + int string_count; + int max_length; + char **plist; + + /* Look through the strings. Count them. Find the largest one so we can + allocate a holding area. */ + + for (max_length = string_count = i = 0; + list[i] != NULL; + ++i, ++string_count) + { + int length = strlen(list[i]); + + if (length > max_length) + max_length = length; + } + + /* if we have no strings, then something is wrong. */ + if (string_count == 0) + return(-1); + + /* otherwise, we will need a holding area big enough to hold almost two + copies of our largest string. */ + swallowed_p = swallowed = alloca(max_length << 1); + + /* and a list of pointers to current scan points. */ + plist = alloca(string_count * sizeof(*plist)); + + /* and initialize */ + for (i = 0; i < string_count; ++i) + plist[i] = list[i]; + + for (ch = sr_readchar(); /* loop forever */ ; ch = sr_readchar()) + { + QUIT; /* Let user quit and leave process running */ + ch_handled = 0; + + for (i = 0; i < string_count; ++i) + { + if (ch == *plist[i] || *plist[i] == '?') + { + ++plist[i]; + if (*plist[i] == '\0') + return(i); + + if (!ch_handled) + *swallowed_p++ = ch; + + ch_handled = 1; + } + else + plist[i] = list[i]; + } + + if (!ch_handled) + { + char *p; + + /* Print out any characters which have been swallowed. */ + if (passthrough) + { + for (p = swallowed; p < swallowed_p; ++p) + putc (*p, stdout); + + putc (ch, stdout); + } + + swallowed_p = swallowed; + } + } + + return(-1); +} + +/* Get ready to modify the registers array. On machines which store + individual registers, this doesn't need to do anything. On machines + which store all the registers in one fell swoop, this makes sure + that registers contains all the registers from the program being + debugged. */ + +void +gr_prepare_to_store () +{ + /* Do nothing, since we assume we can store individual regs */ +} + +/* Read a word from remote address ADDR and return it. + * This goes through the data cache. + */ +int +gr_fetch_word (addr) + CORE_ADDR addr; +{ + return dcache_fetch (gr_get_dcache(), addr); +} + +/* Write a word WORD into remote address ADDR. + This goes through the data cache. */ + +void +gr_store_word (addr, word) + CORE_ADDR addr; + int word; +{ + dcache_poke (gr_get_dcache(), addr, word); +} + +void +_initialize_sr_support () +{ + add_show_from_set (add_set_cmd ("remotedebug", no_class, + var_zinteger, (char *)&sr_settings.debug, + "Set debugging of remote serial I/O.\n\ +When non-zero, each packet sent or received with the remote target\n\ +is displayed. Higher numbers produce more debugging.", &setlist), + &showlist); + +/* FIXME-now: if target is open when baud changes... */ + add_show_from_set (add_set_cmd ("remotebaud", no_class, + var_zinteger, (char *)&sr_settings.baud_rate, + "Set baud rate for remote serial I/O.\n\ +This value is used to set the speed of the serial port when debugging\n\ +using remote targets.", &setlist), + &showlist); + +/* FIXME-now: if target is open... */ + add_show_from_set (add_set_cmd ("remotedevice", no_class, + var_filename, (char *)&sr_settings.device, + "Set device for remote serial I/O.\n\ +This device is used as the serial port when debugging using remote\n\ +targets.", &setlist), + &showlist); + + add_com ("remote ", class_obscure, sr_com, + "Send a command to the remote monitor."); + +} diff --git a/gdb/remote-utils.h b/gdb/remote-utils.h new file mode 100644 index 00000000000..f3f4989f20a --- /dev/null +++ b/gdb/remote-utils.h @@ -0,0 +1,154 @@ +/* Generic support for remote debugging interfaces. + + Copyright 1993 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + +#ifndef REMOTE_UTILS_H +#define REMOTE_UTILS_H + +#include "target.h" +#include "dcache.h" + +/* Stuff that should be shared (and handled consistently) among the various + remote targets. */ + +struct _sr_settings { + /* Debugging level. 0 is off, and non-zero values mean to print + some debug information (higher values, more information). */ + unsigned int debug; + + /* Baud rate specified for talking to remote target systems via a + serial port. */ + unsigned int baud_rate; + + unsigned int timeout; + + int retries; + + char *device; + serial_t desc; + +}; + +extern struct _sr_settings sr_settings; + +/* get and set debug value. */ +#define sr_get_debug() (sr_settings.debug) +#define sr_set_debug(newval) (sr_settings.debug = (newval)) + +/* get and set baud rate. */ +#define sr_get_baud_rate() (sr_settings.baud_rate) +#define sr_set_baud_rate(newval) (sr_settings.baud_rate = (newval)) + +/* get and set timeout. */ +#define sr_get_timeout() (sr_settings.timeout) +#define sr_set_timeout(newval) (sr_settings.timeout = (newval)) + +/* get and set device. */ +#define sr_get_device() (sr_settings.device) +#define sr_set_device(newval) \ +{ \ + if (sr_settings.device) free(sr_settings.device); \ + sr_settings.device = (newval); \ +} + +/* get and set descriptor value. */ +#define sr_get_desc() (sr_settings.desc) +#define sr_set_desc(newval) (sr_settings.desc = (newval)) + +/* get and set retries. */ +#define sr_get_retries() (sr_settings.retries) +#define sr_set_retries(newval) (sr_settings.retries = (newval)) + +#define sr_is_open() (sr_settings.desc != NULL) + +#define sr_check_open() { if (!sr_is_open()) \ + error ("Remote device not open"); } + +struct gr_settings { + /* This is our data cache. */ + DCACHE *dcache; + char *prompt; + struct target_ops *ops; + int (*clear_all_breakpoints)PARAMS((void)); + memxferfunc readfunc; + memxferfunc writefunc; + void (*checkin)PARAMS((void)); +}; + +extern struct gr_settings *gr_settings; + +/* get and set dcache. */ +#define gr_get_dcache() (gr_settings->dcache) +#define gr_set_dcache(newval) (gr_settings->dcache = (newval)) + +/* get and set prompt. */ +#define gr_get_prompt() (gr_settings->prompt) +#define gr_set_prompt(newval) (gr_settings->prompt = (newval)) + +/* get and set ops. */ +#define gr_get_ops() (gr_settings->ops) +#define gr_set_ops(newval) (gr_settings->ops = (newval)) + +#define gr_clear_all_breakpoints() ((gr_settings->clear_all_breakpoints)()) +#define gr_checkin() ((gr_settings->checkin)()) + +/* Keep discarding input until we see the prompt. + + The convention for dealing with the prompt is that you + o give your command + o *then* wait for the prompt. + + Thus the last thing that a procedure does with the serial line + will be an gr_expect_prompt(). Exception: resume does not + wait for the prompt, because the terminal is being handed over + to the inferior. However, the next thing which happens after that + is a bug_wait which does wait for the prompt. + Note that this includes abnormal exit, e.g. error(). This is + necessary to prevent getting into states from which we can't + recover. */ + +#define gr_expect_prompt() sr_expect(gr_get_prompt()) + +int gr_fetch_word PARAMS((CORE_ADDR addr)); +int gr_multi_scan PARAMS((char *list[], int passthrough)); +int sr_get_hex_digit PARAMS((int ignore_space)); +int sr_pollchar PARAMS((void)); +int sr_readchar PARAMS((void)); +int sr_timed_read PARAMS((char *buf, int n)); +long sr_get_hex_word PARAMS((void)); +void gr_close PARAMS((int quitting)); +void gr_create_inferior PARAMS((char *execfile, char *args, char **env)); +void gr_detach PARAMS((char *args, int from_tty)); +void gr_files_info PARAMS((struct target_ops *ops)); +void gr_generic_checkin PARAMS((void)); +void gr_kill PARAMS((void)); +void gr_mourn PARAMS((void)); +void gr_prepare_to_store PARAMS((void)); +void gr_store_word PARAMS((CORE_ADDR addr, int word)); +void sr_expect PARAMS((char *string)); +void sr_get_hex_byte PARAMS((char *byt)); +void sr_scan_args PARAMS((char *proto, char *args)); +void sr_write PARAMS((char *a, int l)); +void sr_write_cr PARAMS((char *s)); + +void gr_open PARAMS((char *args, int from_tty, + struct gr_settings *gr_settings)); + + +#endif /* REMOTE_UTILS_H */