From: Andrey Miroshnikov <andrey@technepisteme.xyz>
Date: Wed, 17 Nov 2021 13:27:42 +0000 (+0000)
Subject: Copying jtag test file from soc repo
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=c7c5a8e5ec8d336a5bf83425a4c1c2a7513adca1;p=pinmux.git

Copying jtag test file from soc repo
---

diff --git a/src/spec/test_jtag_tap_srv.py b/src/spec/test_jtag_tap_srv.py
new file mode 100644
index 0000000..9d6089a
--- /dev/null
+++ b/src/spec/test_jtag_tap_srv.py
@@ -0,0 +1,263 @@
+"""DMI 2 JTAG test
+
+based on Staf Verhaegen (Chips4Makers) wishbone TAP
+"""
+
+import sys
+from nmigen import (Module, Signal, Elaboratable, Const)
+from c4m.nmigen.jtag.tap import TAP, IOType
+from c4m.nmigen.jtag.bus import Interface as JTAGInterface
+#from soc.debug.dmi import DMIInterface, DBGCore
+#from soc.debug.test.dmi_sim import dmi_sim
+from soc.debug.jtag import JTAG
+from soc.debug.test.jtagremote import JTAGServer, JTAGClient
+
+#from soc.bus.sram import SRAM
+from nmigen import Memory, Signal, Module
+
+from nmigen.back.pysim import Simulator, Delay, Settle, Tick
+from nmutil.util import wrap
+from soc.debug.jtagutils import (jtag_read_write_reg,
+                                 jtag_srv, jtag_set_reset,
+                                 jtag_set_ir, jtag_set_get_dr)
+
+def test_pinset():
+    return {
+            # in, out, tri-out, tri-inout
+            'test': ['io0-', 'io1+', 'io2>', 'io3*'],
+           }
+
+
+# JTAG-ircodes for accessing DMI
+DMI_ADDR = 8
+DMI_READ = 9
+DMI_WRRD = 10
+
+# JTAG-ircodes for accessing Wishbone
+WB_ADDR = 5
+WB_READ = 6
+WB_WRRD = 7
+
+# JTAG boundary scan reg addresses
+BS_EXTEST = 0
+BS_INTEST = 0
+BS_SAMPLE = 2
+BS_PRELOAD = 2
+
+
+def jtag_sim(dut, srv_dut):
+
+    ####### JTAGy stuff (IDCODE) ######
+
+    # read idcode
+    yield from jtag_set_reset(dut)
+    idcode = yield from jtag_read_write_reg(dut, 0b1, 32)
+    print ("idcode", hex(idcode))
+    assert idcode == 0x18ff
+
+    ####### JTAG Boundary scan ######
+
+    bslen = dut.scan_len
+    print ("scan len", bslen)
+
+    # sample test
+    bs_actual = 0b100110
+    yield srv_dut.ios[0].pad.i.eq(1)
+    yield srv_dut.ios[1].core.o.eq(0)
+    yield srv_dut.ios[2].core.o.eq(1)
+    yield srv_dut.ios[2].core.oe.eq(1)
+    yield srv_dut.ios[3].pad.i.eq(0)
+    yield srv_dut.ios[3].core.o.eq(0)
+    yield srv_dut.ios[3].core.oe.eq(1)
+    yield
+
+    bs = yield from jtag_read_write_reg(dut, BS_SAMPLE, bslen, bs_actual)
+    print ("bs scan", bin(bs))
+    yield
+
+    print ("io0 pad.i", (yield srv_dut.ios[0].core.i))
+    print ("io1 core.o", (yield srv_dut.ios[1].pad.o))
+    print ("io2 core.o", (yield srv_dut.ios[2].pad.o))
+    print ("io2 core.oe", (yield srv_dut.ios[2].pad.oe))
+    print ("io3 core.i", (yield srv_dut.ios[3].core.i))
+    print ("io3 pad.o", (yield srv_dut.ios[3].pad.o))
+    print ("io3 pad.oe", (yield srv_dut.ios[3].pad.oe))
+
+    assert (yield srv_dut.ios[0].core.i) == 1
+    assert (yield srv_dut.ios[1].pad.o) == 0
+    assert (yield srv_dut.ios[2].pad.o) == 1
+    assert (yield srv_dut.ios[2].pad.oe) == 1
+    assert (yield srv_dut.ios[3].core.i) == 0
+    assert (yield srv_dut.ios[3].pad.o) == 0
+    assert (yield srv_dut.ios[3].pad.oe) == 1
+
+    # extest
+    ir_actual = yield from jtag_set_ir(dut, BS_EXTEST)
+    print ("ir extest", bin(ir_actual))
+    yield
+
+    print ("io0 pad.i", (yield srv_dut.ios[0].core.i))
+    print ("io1 core.o", (yield srv_dut.ios[1].pad.o))
+    print ("io2 core.o", (yield srv_dut.ios[2].pad.o))
+    print ("io2 core.oe", (yield srv_dut.ios[2].pad.oe))
+    print ("io3 core.i", (yield srv_dut.ios[3].core.i))
+    print ("io3 pad.o", (yield srv_dut.ios[3].pad.o))
+    print ("io3 pad.oe", (yield srv_dut.ios[3].pad.oe))
+
+    assert (yield srv_dut.ios[0].core.i) == 0
+    assert (yield srv_dut.ios[1].pad.o) == 1
+    assert (yield srv_dut.ios[2].pad.o) == 0
+    assert (yield srv_dut.ios[2].pad.oe) == 0
+    assert (yield srv_dut.ios[3].core.i) == 1
+    assert (yield srv_dut.ios[3].pad.o) == 1
+    assert (yield srv_dut.ios[3].pad.oe) == 0
+
+    # set pins
+    bs_actual = 0b1011001
+    yield srv_dut.ios[0].pad.i.eq(0)
+    yield srv_dut.ios[1].core.o.eq(1)
+    yield srv_dut.ios[2].core.o.eq(0)
+    yield srv_dut.ios[2].core.oe.eq(0)
+    yield srv_dut.ios[3].pad.i.eq(1)
+    yield srv_dut.ios[3].core.o.eq(1)
+    yield srv_dut.ios[3].core.oe.eq(0)
+    yield
+
+    bs = yield from jtag_set_get_dr(dut, bslen, bs_actual)
+    print ("bs scan", bin(bs))
+    yield
+
+    print ("io0 pad.i", (yield srv_dut.ios[0].core.i))
+    print ("io1 core.o", (yield srv_dut.ios[1].pad.o))
+    print ("io2 core.o", (yield srv_dut.ios[2].pad.o))
+    print ("io2 core.oe", (yield srv_dut.ios[2].pad.oe))
+    print ("io3 core.i", (yield srv_dut.ios[3].core.i))
+    print ("io3 pad.o", (yield srv_dut.ios[3].pad.o))
+    print ("io3 pad.oe", (yield srv_dut.ios[3].pad.oe))
+
+    assert (yield srv_dut.ios[0].core.i) == 1
+    assert (yield srv_dut.ios[1].pad.o) == 0
+    assert (yield srv_dut.ios[2].pad.o) == 1
+    assert (yield srv_dut.ios[2].pad.oe) == 1
+    assert (yield srv_dut.ios[3].core.i) == 0
+    assert (yield srv_dut.ios[3].pad.o) == 0
+    assert (yield srv_dut.ios[3].pad.oe) == 1
+
+    # reset
+    yield from jtag_set_reset(dut)
+    print ("bs reset")
+    yield
+
+    print ("io0 pad.i", (yield srv_dut.ios[0].pad.i))
+    print ("io1 core.o", (yield srv_dut.ios[1].core.o))
+    print ("io2 core.o", (yield srv_dut.ios[2].core.o))
+    print ("io2 core.oe", (yield srv_dut.ios[2].core.oe))
+    print ("io3 core.i", (yield srv_dut.ios[3].core.i))
+    print ("io3 pad.o", (yield srv_dut.ios[3].pad.o))
+    print ("io3 pad.oe", (yield srv_dut.ios[3].pad.oe))
+
+    assert (yield srv_dut.ios[0].core.i) == 0
+    assert (yield srv_dut.ios[1].pad.o) == 1
+    assert (yield srv_dut.ios[2].pad.o) == 0
+    assert (yield srv_dut.ios[2].pad.oe) == 0
+    assert (yield srv_dut.ios[3].core.i) == 1
+    assert (yield srv_dut.ios[3].pad.o) == 1
+    assert (yield srv_dut.ios[3].pad.oe) == 0
+
+    ####### JTAG to DMI ######
+
+    # write DMI address
+    yield from jtag_read_write_reg(dut, DMI_ADDR, 8, DBGCore.CTRL)
+
+    # read DMI CTRL register
+    status = yield from jtag_read_write_reg(dut, DMI_READ, 64)
+    print ("dmi ctrl status", hex(status))
+    assert status == 4
+
+    # write DMI address
+    yield from jtag_read_write_reg(dut, DMI_ADDR, 8, 0)
+
+    # write DMI CTRL register
+    status = yield from jtag_read_write_reg(dut, DMI_WRRD, 64, 0b101)
+    print ("dmi ctrl status", hex(status))
+    assert status == 4 # returned old value (nice! cool feature!)
+
+    # write DMI address
+    yield from jtag_read_write_reg(dut, DMI_ADDR, 8, DBGCore.CTRL)
+
+    # read DMI CTRL register
+    status = yield from jtag_read_write_reg(dut, DMI_READ, 64)
+    print ("dmi ctrl status", hex(status))
+    assert status == 0
+
+    # write DMI MSR address
+    yield from jtag_read_write_reg(dut, DMI_ADDR, 8, DBGCore.MSR)
+
+    # read DMI MSR register
+    msr = yield from jtag_read_write_reg(dut, DMI_READ, 64)
+    print ("dmi msr", hex(msr))
+    assert msr == 0xdeadbeef
+
+    ####### JTAG to Wishbone ######
+
+    # write Wishbone address
+    yield from jtag_read_write_reg(dut, WB_ADDR, 64, 0x18)
+
+    # write/read wishbone data
+    data = yield from jtag_read_write_reg(dut, WB_WRRD, 64, 0xfeef)
+    print ("wb write", hex(data))
+
+    # write Wishbone address
+    yield from jtag_read_write_reg(dut, WB_ADDR, 64, 0x18)
+
+    # write/read wishbone data
+    data = yield from jtag_read_write_reg(dut, WB_READ, 64, 0)
+    print ("wb read", hex(data))
+
+    ####### done - tell dmi_sim to stop (otherwise it won't) ########
+
+    srv_dut.stop = True
+    print ("jtag sim stopping")
+
+
+if __name__ == '__main__':
+    dut = JTAG(test_pinset(), wb_data_wid=64)
+    dut.stop = False
+
+    # rather than the client access the JTAG bus directly
+    # create an alternative that the client sets
+    class Dummy: pass
+    cdut = Dummy()
+    cdut.cbus = JTAGInterface()
+
+    # set up client-server on port 44843-something
+    dut.s = JTAGServer()
+    if len(sys.argv) != 2 or sys.argv[1] != 'server':
+        cdut.c = JTAGClient()
+        dut.s.get_connection()
+    else:
+        dut.s.get_connection(None) # block waiting for connection
+
+    # take copy of ir_width and scan_len
+    cdut._ir_width = dut._ir_width
+    cdut.scan_len = dut.scan_len
+
+    memory = Memory(width=64, depth=16)
+    sram = SRAM(memory=memory, bus=dut.wb)
+
+    m = Module()
+    m.submodules.ast = dut
+    m.submodules.sram = sram
+
+    sim = Simulator(m)
+    sim.add_clock(1e-6, domain="sync")      # standard clock
+
+    sim.add_sync_process(wrap(jtag_srv(dut))) # jtag server
+    if len(sys.argv) != 2 or sys.argv[1] != 'server':
+        sim.add_sync_process(wrap(jtag_sim(cdut, dut))) # actual jtag tester
+    else:
+        print ("running server only as requested, use openocd remote to test")
+    sim.add_sync_process(wrap(dmi_sim(dut)))  # handles (pretends to be) DMI
+
+    with sim.write_vcd("dmi2jtag_test_srv.vcd"):
+        sim.run()