From: Kevin Buettner Date: Fri, 10 Jul 2015 17:25:29 +0000 (-0700) Subject: remote.c: Make read_ptid return a null value when no thread id is found. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=c9f35b348e586c0f48592918324b6e15c815a702;p=binutils-gdb.git remote.c: Make read_ptid return a null value when no thread id is found. When using GDB to debug an RX target using the GDB remote protocol, using a Renesas supplied debug agent, I encountered the following assertion error: thread.c:85: internal-error: inferior_thread: Assertion `tp' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Create a core file of GDB? (y or n) n Command aborted. This assertion error occurs due to the fact that the value associated with inferior_ptid is not on the thread list. The remote debug output (obtained with "set debug remote 1") is fairly short, so I will include it up to the point where things go wrong - which is somewhat before the assertion failure: (gdb) target remote coyote.lan:61234 Remote debugging using coyote.lan:61234 Sending packet: $qSupported:multiprocess+;swbreak+;hwbreak+;qRelocInsn+#c9...Ack Packet received: PacketSize=c00;qXfer:memory-map:read-;qXfer:features:read-;QStartNoAckMode+;multiprocess+;QNonStop+ Packet qSupported (supported-packets) is supported Sending packet: $QStartNoAckMode#b0...Ack Packet received: OK Sending packet: $Hgp0.0#ad...Packet received: OK Sending packet: $QNonStop:0#8c...Packet received: OK Sending packet: $qTStatus#49...Packet received: Packet qTStatus (trace-status) is NOT supported Sending packet: $?#3f...Packet received: S02 Sending packet: $qfThreadInfo#bb...Packet received: m1 Sending packet: $qsThreadInfo#c8...Packet received: l Sending packet: $qAttached:a410#bf...Packet received: 0 Packet qAttached (query-attached) is supported Sending packet: $Hc-1#09...Packet received: OK Sending packet: $qC#b4...Packet received: QC not supported Above is the trace starting from the invocation of "target remote" through the call of get_current_thread() in remote_start_remote(). Below, I've pasted this line of code along with additional lines of context. The test following the call is especially important to understanding both the problem and my patch. /* We have thread information; select the thread the target says should be current. If we're reconnecting to a multi-threaded program, this will ideally be the thread that last reported an event before GDB disconnected. */ inferior_ptid = get_current_thread (wait_status); if (ptid_equal (inferior_ptid, null_ptid)) { /* Odd... The target was able to list threads, but not tell us which thread was current (no "thread" register in T stop reply?). Just pick the first thread in the thread list then. */ inferior_ptid = thread_list->ptid; } } Prior to getting to the code pasted above, remote_start_remote() made a call to target_update_thread_list(). This corresponds to the following lines from the above trace: Sending packet: $qfThreadInfo#bb...Packet received: m1 Sending packet: $qsThreadInfo#c8...Packet received: l Sending packet: $qAttached:a410#bf...Packet received: 0 Packet qAttached (query-attached) is supported Once target_update_thread_list has completed, the thread list contains a single entry: {pid = 42000, lwp = 1, tid = 0}. remote_start_remote() then makes a call to set_continue_thread(), accounting for this line of the trace: Sending packet: $Hc-1#09...Packet received: OK Finally, the call to get_current_thread() is responsible for the last line of the trace that I provided above: Sending packet: $qC#b4...Packet received: QC not supported get_current_thread() calls stop_reply_extract_thread() with the wait status. This returns null_ptid. get_current_thread() then calls remote_current_thread with a null inferior_ptid. After the calls to putpkt() and getpkt(), rs->buf[0] is 'Q', so read_ptid() is called and its result is returned. The buffer passed to read_ptid() is " not supported". read_ptid ultimately returns a ptid of {pid = 4200, lwp = 0, tid = 0}. However, this thread is not on the thread list. As noted earlier, the call to target_update_thread_list() had placed {pid = 42000, lwp = 1, tid = 0} on the list. This is the only thread in the list. When these calls ultimately return to remote_start_remote(), inferior_ptid gets set to {pid = 4200, lwp = 0, tid = 0}, which (again) is not on the thread list. It appears to me that the string " not supported" is coming from the debug agent. If so, it should be fixed, but I don't see a reason to not consult the thread list in order to place a valid thread id in inferior_ptid. This (consultation of the thread list) is what is done when inferior_ptid is null_ptid: if (ptid_equal (inferior_ptid, null_ptid)) { /* Odd... The target was able to list threads, but not tell us which thread was current (no "thread" register in T stop reply?). Just pick the first thread in the thread list then. */ inferior_ptid = thread_list->ptid; } My patch causes a null inferior_ptid to be returned by read_ptid when no thread id is found in the response from the debug agent. This return value ends up being returned by remote_current_thread() and then by get_current_thread. The assignment then places this null value into inferior_ptid. That, in turn, allows the ptid_equal test (noted above) to fetch a valid thread from the thread list. I no longer see the assertion failure due a good value (which is on the thread list) being placed in inferior_ptid. This patch also adds two log warnings that may be output when "set debug remote 1" is used. When running against the Renesas debug agent mentioned earlier, this is the relevant portion of the log output: Sending packet: $qC#b4...Packet received: QC not supported warning: garbage in qC reply warning: couldn't determine remote current thread; picking first in list. gdb/ChangeLog: * remote.c (read_ptid): Return null_ptid when no thread id is found. (remote_current_thread): Add log warning for malformed qC reply. (remote_start_remote): Add log warning when current thread not found. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 0061bff93b5..7608ac1f1f9 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,12 @@ +2015-07-25 Kevin Buettner + + * remote.c (read_ptid): Return null_ptid when no thread id + is found. + (remote_current_thread): Add log warning for malformed + qC reply. + (remote_start_remote): Add log warning when current thread + not found. + 2015-07-24 Pedro Alves * s390-linux-nat.c (fetch_regs, store_regs, fetch_fpregs) diff --git a/gdb/remote.c b/gdb/remote.c index 94899bdfc1d..69da5084add 100644 --- a/gdb/remote.c +++ b/gdb/remote.c @@ -2158,6 +2158,14 @@ read_ptid (char *buf, char **obuf) /* No multi-process. Just a tid. */ pp = unpack_varlen_hex (p, &tid); + /* Return null_ptid when no thread id is found. */ + if (p == pp) + { + if (obuf) + *obuf = pp; + return null_ptid; + } + /* Since the stub is not sending a process id, then default to what's in inferior_ptid, unless it's null at this point. If so, then since there's no way to know the pid of the reported @@ -2750,7 +2758,17 @@ remote_current_thread (ptid_t oldpid) putpkt ("qC"); getpkt (&rs->buf, &rs->buf_size, 0); if (rs->buf[0] == 'Q' && rs->buf[1] == 'C') - return read_ptid (&rs->buf[2], NULL); + { + char *obuf; + ptid_t result; + + result = read_ptid (&rs->buf[2], &obuf); + if (*obuf != '\0' && remote_debug) + fprintf_unfiltered (gdb_stdlog, + "warning: garbage in qC reply\n"); + + return result; + } else return oldpid; } @@ -3701,6 +3719,12 @@ remote_start_remote (int from_tty, struct target_ops *target, int extended_p) tell us which thread was current (no "thread" register in T stop reply?). Just pick the first thread in the thread list then. */ + + if (remote_debug) + fprintf_unfiltered (gdb_stdlog, + "warning: couldn't determine remote " + "current thread; picking first in list.\n"); + inferior_ptid = thread_list->ptid; } }