From: Jeff Law Date: Thu, 20 Dec 2001 23:37:33 +0000 (+0000) Subject: * gdb.hp/gdb.base-hp/so-thresh.exp: Update text in expect strings X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=ca344dff5c340979f9aaf15316c518eec515a28a;p=binutils-gdb.git * gdb.hp/gdb.base-hp/so-thresh.exp: Update text in expect strings to match current gdb output. Update due to using auto-solib-limit for limiting instead of overloading auto-solib-add. * gdb.hp/gdb.base-hp/so-thresh.mk: Always use "cc" to build the test program. * gdb.c++/templates.exp: Use "hppa64-*-*", not "hppa2.0w-*-*" * gdb.hp/gdb.base-hp/dollar.exp: Likewise * gdb.hp/gdb.base-hp/pxdb.exp: Likewise. * gdb.hp/gdb.base-hp/reg-pa64.exp: Likewise. * gdb.hp/gdb.base-hp/reg.exp: Likewise. * gdb.hp/gdb.compat/xdb3.exp: Likewise. * gdb.hp/gdb.defects/bs15503.exp: Likewise. * gdb.hp/gdb.objdbg/objdbg01.exp: Likewise * gdb.hp/gdb.objdbg/objdbg02.exp: Likewise * gdb.hp/gdb.objdbg/objdbg03.exp: Likewise * gdb.hp/gdb.threads-hp/usrthbasic.exp: Likewise. * gdb.hp/gdb.threads-hp/usrthcore.exp: Likewise. * gdb.hp/gdb.threads-hp/usrthfork.exp: Likewise. --- diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index f797a3d249e..51c5f252adb 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -7,7 +7,25 @@ Thu Dec 20 09:54:36 2001 Jeffrey A Law (law@redhat.com) + * gdb.hp/gdb.base-hp/so-thresh.exp: Update text in expect strings + to match current gdb output. Update due to using auto-solib-limit + for limiting instead of overloading auto-solib-add. + * gdb.hp/gdb.base-hp/so-thresh.mk: Always use "cc" to build the + test program. + * gdb.c++/templates.exp: Use "hppa64-*-*", not "hppa2.0w-*-*" + * gdb.hp/gdb.base-hp/dollar.exp: Likewise + * gdb.hp/gdb.base-hp/pxdb.exp: Likewise. + * gdb.hp/gdb.base-hp/reg-pa64.exp: Likewise. + * gdb.hp/gdb.base-hp/reg.exp: Likewise. + * gdb.hp/gdb.compat/xdb3.exp: Likewise. + * gdb.hp/gdb.defects/bs15503.exp: Likewise. + * gdb.hp/gdb.objdbg/objdbg01.exp: Likewise + * gdb.hp/gdb.objdbg/objdbg02.exp: Likewise + * gdb.hp/gdb.objdbg/objdbg03.exp: Likewise + * gdb.hp/gdb.threads-hp/usrthbasic.exp: Likewise. + * gdb.hp/gdb.threads-hp/usrthcore.exp: Likewise. + * gdb.hp/gdb.threads-hp/usrthfork.exp: Likewise. * gdb.base/annota1.exp: Expect failure for hpux11 when posting a SIGTRAP to the inferior. diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp index 8f372d86fbd..b3a6335a1f5 100644 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp +++ b/gdb/testsuite/gdb.hp/gdb.base-hp/dollar.exp @@ -65,8 +65,8 @@ if ![runto_main] then { } # Test for millicode routines -# hppa2.0w does not support dyncall -if ![istarget "hppa2.0w*-*-*"] { +# hppa64 does not support dyncall +if ![istarget "hppa64*-*-*"] { send_gdb "print \$\$dyncall\n" gdb_expect { -re "\\$\[0-9\]* = \\{\\} $hex <>.*$gdb_prompt $" { pass "print \$\$dyncall" } @@ -114,8 +114,8 @@ gdb_expect { } # Try out some other $ name, not millicode -if [istarget "hppa2.0w*-*-*"] { - #hppa2.0w uses __argv instead of $ARGV. +if [istarget "hppa64*-*-*"] { + #hppa64 uses __argv instead of $ARGV. send_gdb "print \__argv\n" gdb_expect { -re "\\$\[0-9\]* = \[0-9\]*.*$gdb_prompt $" { pass "print \__argv" } diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp index 193b719269d..4e48107c60a 100644 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp +++ b/gdb/testsuite/gdb.hp/gdb.base-hp/pxdb.exp @@ -66,7 +66,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${objfile}" object {debug}] # #execute_anywhere "ksh -c \"export LD_PXDB=/dev/null\"" -if [istarget "hppa2.0w-*-*"] { +if [istarget "hppa64-*-*"] { set cmdline "ksh -c \"LD_PXDB=/dev/null ld -o ${binfile} ${objfile} /opt/langtools/lib/pa20_64/crt0.o /opt/langtools/lib/pa20_64/end.o -lc\"" } else { set cmdline "ksh -c \"LD_PXDB=/dev/null ld -o ${binfile} ${objfile} /usr/ccs/lib/crt0.o /opt/langtools/lib/end.o -lc\"" diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp index 8ad8a017bbe..ce42c786e3d 100644 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp +++ b/gdb/testsuite/gdb.hp/gdb.base-hp/reg-pa64.exp @@ -32,8 +32,8 @@ if ![istarget "hppa*-*-*"] { return 0 } -if ![istarget "hppa2.0w-hp-hpux*"] { - verbose "reg-pa64.exp is only for PA2.0W." +if ![istarget "hppa64-hp-hpux*"] { + verbose "reg-pa64.exp is only for PA2.0W (aka PA64)." return 0 } @@ -131,13 +131,13 @@ gdb_test "info reg fpe2" ".*fpe2 .*" "fpe2" gdb_test "info reg fpe3" ".*fpe3 .*" "fpe3" #DTS CLLbs16708 #info reg should recognize fpe4..fpe7. -setup_xfail hppa2.0w-hp-hpux* CLLbs16708 +setup_xfail hppa64-hp-hpux* CLLbs16708 gdb_test "info reg fpe4" ".*fpe4 .*" "fpe4" -setup_xfail hppa2.0w-hp-hpux* CLLbs16708 +setup_xfail hppa64-hp-hpux* CLLbs16708 gdb_test "info reg fpe5" ".*fpe5 .*" "fpe5" -setup_xfail hppa2.0w-hp-hpux* CLLbs16708 +setup_xfail hppa64-hp-hpux* CLLbs16708 gdb_test "info reg fpe6" ".*fpe6 .*" "fpe6" -setup_xfail hppa2.0w-hp-hpux* CLLbs16708 +setup_xfail hppa64-hp-hpux* CLLbs16708 gdb_test "info reg fpe7" ".*fpe7 .*" "fpe7" gdb_test "info reg fr4" ".*fr4.*(double precision).* 1.*" diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp index 3d57e9f3c09..797dc854580 100644 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp +++ b/gdb/testsuite/gdb.hp/gdb.base-hp/reg.exp @@ -30,7 +30,7 @@ if { [skip_hp_tests] } then { continue } set testfile "reg" -if [istarget "hppa2.0w-hp-hpux*"] { +if [istarget "hppa64-hp-hpux*"] { verbose "reg.exp is not for PA2.0W." return 0 } diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.exp b/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.exp index ca60282100c..82e020fadcb 100644 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.exp +++ b/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.exp @@ -67,7 +67,7 @@ send_user "Making with '${srcdir}/${subdir}/${testfile}.sh $subdir ...\n" remote_exec build "${srcdir}/${subdir}/${testfile}.sh $subdir" # Only HP-UX (and any other platforms using SOM shared libraries, I -# guess) interprets the auto-solib-add variable as a threshhold, +# guess) interprets the auto-solib-limit variable as a threshhold, # rather than a boolean that strictly enables or disables automatic # loading of shlib symbol tables. # @@ -90,44 +90,40 @@ gdb_load ${binfile} # debugger's symbol table reaches a specified threshhold. # -# On HP-UX, the help text for auto-solib-add mentions that it +# On HP-UX, the help text for auto-solib-limit mentions that it # serves as a threshhold. # -send_gdb "help set auto-solib-add\n" +send_gdb "help set auto-solib-limit\n" gdb_expect { - -re "Set autoloading size threshold .in megabytes. of shared library symbols.* -If nonzero, symbols from all shared object libraries will be loaded.* -automatically when the inferior begins execution or when the dynamic linker.* -informs gdb that a new library has been loaded, until the symbol table.* -of the program and libraries exceeds this threshold.* -Otherwise, symbols must be loaded manually, using `sharedlibrary'.*$gdb_prompt $"\ - {pass "help set auto-solib-add"} + -re "Set threshold .in Mb. for autoloading shared library symbols.* +When shared library autoloading is enabled, new libraries will be loaded.* +only until the total size of shared library symbols exceeds this.* +threshold in megabytes. Is ignored when using .sharedlibrary.*$gdb_prompt $"\ + {pass "help set auto-solib-limit"} -re "$gdb_prompt $"\ - {fail "help set auto-solib-add"} - timeout {fail "(timeout) help set auto-solib-add"} + {fail "help set auto-solib-limit"} + timeout {fail "(timeout) help set auto-solib-limit"} } # On HP-UX, the threshhold is by default set to 50, which means # 50 megabytes. # -send_gdb "show auto-solib-add\n" +send_gdb "show auto-solib-limit\n" gdb_expect { - -re "Autoloading size threshold .in megabytes. of shared library symbols is $decimal.*$gdb_prompt $"\ - {pass "show auto-solib-add "} - -re "Autoloading size threshold \(in megabytes\) of shared library symbols is $decimal.$gdb_prompt $"\ - {pass "show auto-solib-add "} + -re "Threshold .in Mb. for autoloading shared library symbols is $decimal.*$gdb_prompt $"\ + {pass "show auto-solib-limit "} -re "$gdb_prompt $"\ - {fail "show auto-solib-add "} - timeout {fail "(timeout) show auto-solib-add "} + {fail "show auto-solib-limit "} + timeout {fail "(timeout) show auto-solib-limit "} } -send_gdb "set auto-solib-add 1\n" +send_gdb "set auto-solib-limit 1\n" gdb_expect { -re ".*$gdb_prompt $" - {pass "set auto-solib-add to 1"} + {pass "set auto-solib-limit to 1"} -re ".*$gdb_prompt $" - {fail "set auto-solib-add to 1"} - timeout {fail "(timeout) set auto-solib-add to 1"} + {fail "set auto-solib-limit to 1"} + timeout {fail "(timeout) set auto-solib-limit to 1"} } @@ -152,14 +148,14 @@ gdb_expect { send_gdb "run\n" gdb_expect { -re ".*warning. Symbols for some libraries have not been loaded, because.* -doing so would exceed the size threshold specified by auto-solib-add.* +doing so would exceed the size threshold specified by auto-solib-limit.* To manually load symbols, use the 'sharedlibrary' command.* -To raise the threshold, set auto-solib-add to a larger value and rerun.* +To raise the threshold, set auto-solib-limit to a larger value and rerun.* the program.*$gdb_prompt $"\ - {pass "run to main hit auto-solib-add threshold"} + {pass "run to main hit auto-solib-limit threshold"} -re "$gdb_prompt $"\ - {fail "run to main hit auto-solib-add threshold"} - timeout {fail "(timeout) run to main hit auto-solib-add threshold"} + {fail "run to main hit auto-solib-limit threshold"} + timeout {fail "(timeout) run to main hit auto-solib-limit threshold"} } # Verify that "info share" mentions something about libraries whose @@ -251,18 +247,18 @@ gdb_expect { timeout {fail "(timeout) 2 set break at main"} } -send_gdb "set auto-solib-add 9999\n" +send_gdb "set auto-solib-limit 9999\n" gdb_expect { -re "$gdb_prompt $"\ - {pass "set auto-solib-add threshold to practical infinity"} - timeout {fail "(timeout) set auto-solib-add threshold to practical infinity"} + {pass "set auto-solib-limit threshold to practical infinity"} + timeout {fail "(timeout) set auto-solib-limit threshold to practical infinity"} } send_gdb "run\n" gdb_expect { -re ".*warning. Symbols for some libraries have not been loaded, because.* -doing so would exceed the size threshold specified by auto-solib-add.* +doing so would exceed the size threshold specified by auto-solib-limit.* To manually load symbols, use the 'sharedlibrary' command.* -To raise the threshold, set auto-solib-add to a larger value and rerun.* +To raise the threshold, set auto-solib-limit to a larger value and rerun.* the program.*$gdb_prompt $"\ {fail "rerun threshold at practical infinity (still hit threshold)"} -re "$gdb_prompt $"\ @@ -297,18 +293,18 @@ gdb_expect { timeout {fail "(timeout) 3 set break at main"} } -send_gdb "set auto-solib-add 0\n" +send_gdb "set auto-solib-limit 0\n" gdb_expect { -re "$gdb_prompt $"\ - {pass "set auto-solib-add threshold to 0"} - timeout {fail "(timeout) set auto-solib-add threshold to 0"} + {pass "set auto-solib-limit threshold to 0"} + timeout {fail "(timeout) set auto-solib-limit threshold to 0"} } send_gdb "run\n" gdb_expect { -re ".*warning. Symbols for some libraries have not been loaded, because.* -doing so would exceed the size threshold specified by auto-solib-add.* +doing so would exceed the size threshold specified by auto-solib-limit.* To manually load symbols, use the 'sharedlibrary' command.* -To raise the threshold, set auto-solib-add to a larger value and rerun.* +To raise the threshold, set auto-solib-limit to a larger value and rerun.* the program.*$gdb_prompt $"\ {fail "rerun threshold at 0 (still hit threshold)"} -re "$gdb_prompt $"\ diff --git a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk b/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk index 13b9a91f5bd..f71e9210c7f 100644 --- a/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk +++ b/gdb/testsuite/gdb.hp/gdb.base-hp/so-thresh.mk @@ -3,6 +3,7 @@ OBJDIR=. SRCDIR=. CFLAGS = +DA1.1 -g +CC=cc # This is how to build this generator. genso-thresh.o: ${SRCDIR}/genso-thresh.c diff --git a/gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp b/gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp index 6d66cfc791b..de983d3e9c9 100644 --- a/gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp +++ b/gdb/testsuite/gdb.hp/gdb.compat/xdb3.exp @@ -113,7 +113,7 @@ proc test_dir_list { } { #test_list_sources # proc test_list_sources { } { - if [istarget "hppa2.0w-*-*"] { + if [istarget "hppa64-*-*"] { gdb_test "lf" "Source files for which symbols have been read in:\r\n\r\n.*average\\.c.*Source files for which symbols will be read in on demand:\r\n\r\nglobals,.*\[se\]\[un\]\[md\]\\.c.*\[se\]\[un\]\[md\]\\.c" } else { gdb_test "lf" "Source files for which symbols have been read in:\r\n\r\n.*average\\.c.*\r\n\r\nSource files for which symbols will be read in on demand:\r\n\r\nglobals, end\\.c,.*sum\\.c" @@ -130,7 +130,7 @@ proc test_vlist { } { #test_va # proc test_va { } { - if [istarget "hppa2.0w-*-*"] { + if [istarget "hppa64-*-*"] { gdb_test "va main" "Dump of assembler code for function main:\r\n.*0x.*
:\[ \t\]+std %rp,-0x10\\(%sp\\)\r\n0x.* :\[ \t\]+std,ma %r3,0xd0\\(%sp\\)\r\n.*0x.* :\[ \t\]+std %r4,-0xc8\\(%sp\\)\r\n.*0x.* :\[ \t\]+copy %ret1,%r3\r\n.*" } else { gdb_test "va main" "Dump of assembler code for function main:\r\n.*0x.*
:\[ \t\]+stw %rp,-0x14\\(%sr0,%sp\\)\r\n0x.* :\[ \t\]+ldo 0x\[48\]0\\(%sp\\),%sp\r\n.*0x.* :\[ \t\]+stw %r0,-0x.*\\(%sr0,%sp\\)\r\n.*0x.* :\[ \t\]+stw %r0,-0x.*\\(%sr0,%sp\\)\r\n.*" @@ -149,7 +149,7 @@ proc test_list_globals { } { #test_list_registers # proc test_list_registers { } { - if [istarget "hppa2.0w-*-*"] { + if [istarget "hppa64-*-*"] { gdb_test "lr" "\[ \t\]+flags:.*r17:.*pcsqh:.*cr0:.*\r\n\[ \t\]+r1:.*r18:.*pcoqt:.*cr8:.*" } else { gdb_test "lr" "\[ \t\]+flags:.*r18:.*pcsqt:.*ccr:.*\r\n\[ \t\]+r1:.*r19:.*eiem:.*cr12:.*" diff --git a/gdb/testsuite/gdb.hp/gdb.defects/bs15503.exp b/gdb/testsuite/gdb.hp/gdb.defects/bs15503.exp index 4fafbbbde8e..cb496a21d61 100644 --- a/gdb/testsuite/gdb.hp/gdb.defects/bs15503.exp +++ b/gdb/testsuite/gdb.hp/gdb.defects/bs15503.exp @@ -42,7 +42,7 @@ gdb_reinitialize_dir $srcdir/$subdir # file or module boundaries", "No symbols in psymtab for file ..." or # "File ... has ending address after starting address of next file..." -if [istarget "hppa2.0w-hp-hpux*" ] { +if [istarget "hppa64-hp-hpux*" ] { gdb_test "file $binfile" \ "Detected 64-bit executable..*Invoking .*gdb64..*Use \"run\" to continue execution." \ "loading $binfile" diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp index 64b49f7435f..2feed4b3532 100644 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp +++ b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp @@ -117,7 +117,7 @@ for {set filenum 0} {$filenum < 2} {incr filenum 1} { gdb_test "s 1" "foo .*/x3.cc:7.*" gdb_test "s 1" "main .*/x1.cc:24.*" gdb_test "s 1" ".*25.*" - if [istarget "hppa2.0w-*-*"] { + if [istarget "hppa64-*-*"] { gdb_test "s 1" "0x\[0-9a-f\]+ in .*" gdb_test "c" ".*Program exited normally.*" } else { diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp index 288a9c2733d..7a7e57a211b 100644 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp +++ b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp @@ -65,7 +65,7 @@ gdb_test "s 1" "foo3 .*/x3.cc:5.*" gdb_test "s 1" ".*6.*" gdb_test "s 1" "main .*/x1.cc:15.*" gdb_test "s 1" ".*16.*" -if [istarget "hppa2.0w-*-*"] { +if [istarget "hppa64-*-*"] { gdb_test "s 1" "0x\[0-9a-f\]+ in .*START.*" gdb_test "c" ".*Program exited normally.*" } else { diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp index d0993a5773c..baaa02adcd7 100644 --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp +++ b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg03.exp @@ -12,7 +12,7 @@ set srcsubdir ${srcdir}/${subdir}/objdbg03 set objdbgdir ${objdir}/${subdir}/objdbg03 set binfile ${objdbgdir}/${testfile} set toolssubdir ${srcdir}/${subdir}/tools -if [istarget "hppa2.0w-*-*"] { +if [istarget "hppa64-*-*"] { set symaddrfile ${toolssubdir}/symaddr.pa64 } else { set symaddrfile ${toolssubdir}/symaddr @@ -129,7 +129,7 @@ regsub -all "\[\r\n\]" ${exec_output_common10} "" exec_output_common10 set exec_output_common11 [lindex [remote_exec build "${symaddrfile} ${binfile} common11"] 1] regsub -all "\[\r\n\]" ${exec_output_common11} "" exec_output_common11 -if [istarget "hppa2.0w-*-*"] { +if [istarget "hppa64-*-*"] { gdb_test "p &data1" "..* = \\(int \[*\]\\) ${exec_output_data1}" gdb_test "p &data2" "..* = \\(int \[*\]\\) ${exec_output_data2}" gdb_test "p &data3" "..* = \\(int \[*\]\\) ${exec_output_data3}" diff --git a/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthbasic.exp b/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthbasic.exp index c77f1f17aec..ee9da58dd70 100644 --- a/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthbasic.exp +++ b/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthbasic.exp @@ -28,7 +28,7 @@ if $tracelevel { if { [skip_hp_tests] } { continue } -if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa2.0w-*-*"] } { +if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa64-*-*"] } { verbose "HPUX thread test ignored for non-hppa or PA64 targets." return 0 } diff --git a/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthcore.exp b/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthcore.exp index 55df0431f68..132bdbea4e6 100644 --- a/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthcore.exp +++ b/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthcore.exp @@ -28,7 +28,7 @@ if $tracelevel { if { [skip_hp_tests] } { continue } -if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa2.0w-*-*"] } { +if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa64-*-*"] } { verbose "HPUX thread test ignored for non-hppa or PA64 targets." return 0 } diff --git a/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthfork.exp b/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthfork.exp index 1303fba6c36..8ffe65ca1ab 100644 --- a/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthfork.exp +++ b/gdb/testsuite/gdb.hp/gdb.threads-hp/usrthfork.exp @@ -22,7 +22,7 @@ if $tracelevel { strace $tracelevel } -if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa2.0w-*-*"] } { +if { ![istarget "hppa*-*-hpux*"] || [istarget "hppa64-*-*"] } { verbose "HPUX thread test ignored for non-hppa or PA64 targets." return 0 }