From: dh73 Date: Sun, 1 Oct 2017 16:04:17 +0000 (-0500) Subject: Adding Cyclone IV (E, GX), Arria 10, Cyclone V and LPM functions (ALTPLL and M9K... X-Git-Tag: yosys-0.8~307^2~3 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=cbaba62401ca975bc9aee91b53e0b48fa59bd6c3;p=yosys.git Adding Cyclone IV (E, GX), Arria 10, Cyclone V and LPM functions (ALTPLL and M9K); M9K is not finished yet. Achronix Speedster also in this commit. Both Arria10 and Speedster-i are still experimental due complexity, but you can experiment around those devices right now --- diff --git a/backends/verilog/verilog_backend.cc b/backends/verilog/verilog_backend.cc index bb312944e..33f9a81e4 100644 --- a/backends/verilog/verilog_backend.cc +++ b/backends/verilog/verilog_backend.cc @@ -33,7 +33,7 @@ USING_YOSYS_NAMESPACE PRIVATE_NAMESPACE_BEGIN -bool verbose, norename, noattr, attr2comment, noexpr, nodec, nohex, nostr, defparam; +bool verbose, norename, noattr, attr2comment, noexpr, nodec, nohex, nostr, defparam, nobasenradix; int auto_name_counter, auto_name_offset, auto_name_digits; std::map auto_name_map; std::set reg_wires, reg_ct; @@ -174,8 +174,12 @@ void dump_const(std::ostream &f, const RTLIL::Const &data, int width = -1, int o } if (set_signed && val < 0) f << stringf("-32'sd%u", -val); - else - f << stringf("32'%sd%u", set_signed ? "s" : "", val); + else { + if(!nobasenradix) + f << stringf("%u", val); // There's no signed parameter on megawizard IP + else + f << stringf("32'%sd%u", set_signed ? "s" : "", val); + } } else { dump_hex: if (nohex) @@ -1485,6 +1489,10 @@ struct VerilogBackend : public Backend { log(" -v\n"); log(" verbose output (print new names of all renamed wires and cells)\n"); log("\n"); + log(" -nobasenradix\n"); + log(" dump defparam constants without size and radix for align with legacy\n"); + log(" MegaWizard primitive template implementation.\n"); + log("\n"); log("Note that RTLIL processes can't always be mapped directly to Verilog\n"); log("always blocks. This frontend should only be used to export an RTLIL\n"); log("netlist, i.e. after the \"proc\" pass has been used to convert all\n"); @@ -1505,6 +1513,7 @@ struct VerilogBackend : public Backend { nohex = false; nostr = false; defparam = false; + nobasenradix= false; auto_prefix = ""; bool blackboxes = false; @@ -1575,6 +1584,10 @@ struct VerilogBackend : public Backend { defparam = true; continue; } + if (arg == "-nobasenradix") { + defparam = true; + continue; + } if (arg == "-blackboxes") { blackboxes = true; continue; diff --git a/techlibs/achronix/Makefile.inc b/techlibs/achronix/Makefile.inc new file mode 100755 index 000000000..4dfa59856 --- /dev/null +++ b/techlibs/achronix/Makefile.inc @@ -0,0 +1,6 @@ + +OBJS += techlibs/achronix/synth_speedster.o + +$(eval $(call add_share_file,share/achronix/speedster22i/,techlibs/achronix/speedster22i/cells_comb_speedster.v)) +$(eval $(call add_share_file,share/achronix/speedster22i/,techlibs/achronix/speedster22i/cells_map_speedster.v)) + diff --git a/techlibs/achronix/speedster22i/cells_arith_speedster.v b/techlibs/achronix/speedster22i/cells_arith_speedster.v new file mode 100755 index 000000000..9ef073f7c --- /dev/null +++ b/techlibs/achronix/speedster22i/cells_arith_speedster.v @@ -0,0 +1,65 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +// NOTE: This is still WIP. +(* techmap_celltype = "$alu" *) +module _80_altera_max10_alu (A, B, CI, BI, X, Y, CO); + parameter A_SIGNED = 0; + parameter B_SIGNED = 0; + parameter A_WIDTH = 1; + parameter B_WIDTH = 1; + parameter Y_WIDTH = 1; + + input [A_WIDTH-1:0] A; + input [B_WIDTH-1:0] B; + output [Y_WIDTH-1:0] X, Y; + + input CI, BI; + //output [Y_WIDTH-1:0] CO; + output CO; + + wire _TECHMAP_FAIL_ = Y_WIDTH <= 4; + + wire [Y_WIDTH-1:0] A_buf, B_buf; + \$pos #(.A_SIGNED(A_SIGNED), .A_WIDTH(A_WIDTH), .Y_WIDTH(Y_WIDTH)) A_conv (.A(A), .Y(A_buf)); + \$pos #(.A_SIGNED(B_SIGNED), .A_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) B_conv (.A(B), .Y(B_buf)); + + wire [Y_WIDTH-1:0] AA = A_buf; + wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf; + //wire [Y_WIDTH:0] C = {CO, CI}; + wire [Y_WIDTH+1:0] COx; + wire [Y_WIDTH+1:0] C = {COx, CI}; + + /* Start implementation */ + (* keep *) fiftyfivenm_lcell_comb #(.lut_mask(16'b0000_0000_1010_1010), .sum_lutc_input("cin")) carry_start (.cout(COx[0]), .dataa(C[0]), .datab(1'b1), .datac(1'b1), .datad(1'b1)); + + genvar i; + generate for (i = 0; i < Y_WIDTH; i = i + 1) begin: slice + if(i==Y_WIDTH-1) begin + (* keep *) fiftyfivenm_lcell_comb #(.lut_mask(16'b1111_0000_1110_0000), .sum_lutc_input("cin")) carry_end (.combout(COx[Y_WIDTH]), .dataa(1'b1), .datab(1'b1), .datac(1'b1), .datad(1'b1), .cin(C[Y_WIDTH])); + assign CO = COx[Y_WIDTH]; + end + else + fiftyfivenm_lcell_comb #(.lut_mask(16'b1001_0110_1110_1000), .sum_lutc_input("cin")) arith_cell (.combout(Y[i]), .cout(COx[i+1]), .dataa(AA[i]), .datab(BB[i]), .datac(1'b1), .datad(1'b1), .cin(C[i+1])); + end: slice + endgenerate + /* End implementation */ + assign X = AA ^ BB; + +endmodule diff --git a/techlibs/achronix/speedster22i/cells_comb_speedster.v b/techlibs/achronix/speedster22i/cells_comb_speedster.v new file mode 100755 index 000000000..24c57c41a --- /dev/null +++ b/techlibs/achronix/speedster22i/cells_comb_speedster.v @@ -0,0 +1,127 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +module VCC (output V); + assign V = 1'b1; +endmodule // VCC + +module GND (output G); + assign G = 1'b0; +endmodule // GND + +/* Altera MAX10 devices Input Buffer Primitive */ +module PADIN (output padout, input padin); + assign padout = padin; +endmodule // fiftyfivenm_io_ibuf + +/* Altera MAX10 devices Output Buffer Primitive */ +module PADOUT (output padout, input padin, input oe); + assign padout = padin; + assign oe = oe; +endmodule // fiftyfivenm_io_obuf + +/* Altera MAX10 4-input non-fracturable LUT Primitive */ +module LUT4 (output dout, + input din0, din1, din2, din3); + +/* Internal parameters which define the behaviour + of the LUT primitive. + lut_mask define the lut function, can be expressed in 16-digit bin or hex. + sum_lutc_input define the type of LUT (combinational | arithmetic). + dont_touch for retiming || carry options. + lpm_type for WYSIWYG */ + +parameter lut_function = 16'hFFFF; +//parameter dont_touch = "off"; +//parameter lpm_type = "fiftyfivenm_lcell_comb"; +//parameter sum_lutc_input = "datac"; + +reg [1:0] lut_type; +reg cout_rt; +reg combout_rt; +wire dataa_w; +wire datab_w; +wire datac_w; +wire datad_w; +wire cin_w; + +assign dataa_w = din0; +assign datab_w = din1; +assign datac_w = din2; +assign datad_w = din3; + +function lut_data; +input [15:0] mask; +input dataa, datab, datac, datad; +reg [7:0] s3; +reg [3:0] s2; +reg [1:0] s1; + begin + s3 = datad ? mask[15:8] : mask[7:0]; + s2 = datac ? s3[7:4] : s3[3:0]; + s1 = datab ? s2[3:2] : s2[1:0]; + lut_data = dataa ? s1[1] : s1[0]; + end + +endfunction + +initial begin + /*if (sum_lutc_input == "datac")*/ lut_type = 0; + /*else + if (sum_lutc_input == "cin") lut_type = 1; + else begin + $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input); + $finish(); + end*/ +end + +always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin + if (lut_type == 0) begin // logic function + combout_rt = lut_data(lut_function, dataa_w, datab_w, + datac_w, datad_w); + end + else if (lut_type == 1) begin // arithmetic function + combout_rt = lut_data(lut_function, dataa_w, datab_w, + cin_w, datad_w); + end + cout_rt = lut_data(lut_function, dataa_w, datab_w, cin_w, 'b0); +end + +assign dout = combout_rt & 1'b1; +//assign cout = cout_rt & 1'b1; + +endmodule // fiftyfivenm_lcell_comb + +/* Altera MAX10 D Flip-Flop Primitive */ +// TODO: Implement advanced simulation functions +module dffeas ( output q, + input d, clk, clrn, prn, ena, + input asdata, aload, sclr, sload ); + +parameter power_up="dontcare"; +parameter is_wysiwyg="false"; + reg q; + + always @(posedge clk) + q <= d; + +endmodule + + + diff --git a/techlibs/achronix/speedster22i/cells_map_speedster.v b/techlibs/achronix/speedster22i/cells_map_speedster.v new file mode 100755 index 000000000..fb26eabf0 --- /dev/null +++ b/techlibs/achronix/speedster22i/cells_map_speedster.v @@ -0,0 +1,88 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +// Normal mode DFF negedge clk, negedge reset +module \$_DFF_N_ (input D, C, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Normal mode DFF +module \$_DFF_P_ (input D, C, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule + +// Async Active Low Reset DFF +module \$_DFF_PN0_ (input D, C, R, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Async Active High Reset DFF +module \$_DFF_PP0_ (input D, C, R, output Q); + parameter WYSIWYG="TRUE"; + wire R_i = ~ R; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R_i), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Async Active Low Reset DFF +module \$_DFF_PN0_ (input D, C, R, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +/* */ +module \$__DFFE_PP0 (input D, C, E, R, output Q); + parameter WYSIWYG="TRUE"; + wire E_i = ~ E; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(E_i), .sload(1'b0)); +endmodule + +// Input buffer map +module \$__inpad (input I, output O); + PADIN _TECHMAP_REPLACE_ (.padout(O), .padin(I)); +endmodule + +// Output buffer map +module \$__outpad (input I, output O); + PADOUT _TECHMAP_REPLACE_ (.padout(O), .padin(I), .oe(1'b1)); +endmodule + +// LUT Map +/* 0 -> datac + 1 -> cin */ +module \$lut (A, Y); + parameter WIDTH = 0; + parameter LUT = 0; + input [WIDTH-1:0] A; + output Y; + generate + if (WIDTH == 1) begin + assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function + end else + if (WIDTH == 2) begin + LUT4 #(.lut_function({4{LUT}})) _TECHMAP_REPLACE_ (.dout(Y), .din0(A[0]), .din1(A[1]), .din2(1'b0),.din3(1'b0)); + end else + if(WIDTH == 3) begin + LUT4 #(.lut_function({2{LUT}})) _TECHMAP_REPLACE_ (.dout(Y), .din0(A[0]), .din1(A[1]), .din2(A[2]),.din3(1'b0)); + end else + if(WIDTH == 4) begin + LUT4 #(.lut_function(LUT)) _TECHMAP_REPLACE_ (.dout(Y), .din0(A[0]), .din1(A[1]), .din2(A[2]), .din3(A[3])); + end else + wire _TECHMAP_FAIL_ = 1; + endgenerate +endmodule // + + diff --git a/techlibs/achronix/synth_speedster.cc b/techlibs/achronix/synth_speedster.cc new file mode 100755 index 000000000..8158c56fd --- /dev/null +++ b/techlibs/achronix/synth_speedster.cc @@ -0,0 +1,188 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "kernel/register.h" +#include "kernel/celltypes.h" +#include "kernel/rtlil.h" +#include "kernel/log.h" + +USING_YOSYS_NAMESPACE +PRIVATE_NAMESPACE_BEGIN + +struct SynthIntelPass : public ScriptPass { + SynthIntelPass() : ScriptPass("synth_speedster", "synthesis for Acrhonix Speedster22i FPGAs.") { } + + virtual void help() YS_OVERRIDE + { + // |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---| + log("\n"); + log(" synth_speedster [options]\n"); + log("\n"); + log("This command runs synthesis for Achronix Speedster eFPGAs. This work is still experimental.\n"); + log("\n"); + log(" -top \n"); + log(" use the specified module as top module (default='top')\n"); + log("\n"); + log(" -vout \n"); + log(" write the design to the specified Verilog netlist file. writing of an\n"); + log(" output file is omitted if this parameter is not specified.\n"); + log("\n"); + log(" -run :\n"); + log(" only run the commands between the labels (see below). an empty\n"); + log(" from label is synonymous to 'begin', and empty to label is\n"); + log(" synonymous to the end of the command list.\n"); + log("\n"); + log(" -noflatten\n"); + log(" do not flatten design before synthesis\n"); + log("\n"); + log(" -retime\n"); + log(" run 'abc' with -dff option\n"); + log("\n"); + log("\n"); + log("The following commands are executed by this synthesis command:\n"); + help_script(); + log("\n"); + } + + string top_opt, family_opt, vout_file; + bool retime, flatten; + + virtual void clear_flags() YS_OVERRIDE + { + top_opt = "-auto-top"; + vout_file = ""; + retime = false; + flatten = true; + } + + virtual void execute(std::vector args, RTLIL::Design *design) YS_OVERRIDE + { + string run_from, run_to; + clear_flags(); + + size_t argidx; + for (argidx = 1; argidx < args.size(); argidx++) + { + if (args[argidx] == "-top" && argidx+1 < args.size()) { + top_opt = "-top " + args[++argidx]; + continue; + } + if (args[argidx] == "-vout" && argidx+1 < args.size()) { + vout_file = args[++argidx]; + continue; + } + if (args[argidx] == "-run" && argidx+1 < args.size()) { + size_t pos = args[argidx+1].find(':'); + if (pos == std::string::npos) + break; + run_from = args[++argidx].substr(0, pos); + run_to = args[argidx].substr(pos+1); + continue; + } + if (args[argidx] == "-flatten") { + flatten = true; + continue; + } + if (args[argidx] == "-retime") { + retime = true; + continue; + } + break; + } + extra_args(args, argidx, design); + + if (!design->full_selection()) + log_cmd_error("This comannd only operates on fully selected designs!\n"); + + log_header(design, "Executing SYNTH_SPEEDSTER pass.\n"); + log_push(); + + run_script(design, run_from, run_to); + + log_pop(); + } + + virtual void script() YS_OVERRIDE + { + if (check_label("begin")) + { + run("read_verilog -sv -lib +/achronix/speedster22i/cells_comb_speedster.v"); + run(stringf("hierarchy -check %s", help_mode ? "-top " : top_opt.c_str())); + } + + if (flatten && check_label("flatten", "(unless -noflatten)")) + { + run("proc"); + run("flatten"); + run("tribuf -logic"); + run("deminout"); + } + + if (check_label("coarse")) + { + run("synth -run coarse"); + } + + if (check_label("fine")) + { + run("opt -fast -mux_undef -undriven -fine -full"); + run("memory_map"); + run("opt -undriven -fine"); + run("dffsr2dff"); + run("dff2dffe -direct-match $_DFF_*"); + run("opt -full"); + run("techmap -map +/techmap.v"); + run("opt -fast"); + run("clean -purge"); + run("setundef -undriven -zero"); + if (retime || help_mode) + run("abc -markgroups -dff", "(only if -retime)"); + } + + if (check_label("map_luts")) + { + run("abc -luts 2:2,3,6:5,10,20" + string(retime ? " -dff" : "")); + run("clean"); + } + + if (check_label("map_cells")) + { + run("iopadmap -bits -outpad $__outpad I:O -inpad $__inpad O:I"); + run("techmap -map +/achronix/speedster22i/cells_map_speedster.v"); + run("dffinit -ff dffeas Q INIT"); + run("clean -purge"); + } + + if (check_label("check")) + { + run("hierarchy -check"); + run("stat"); + run("check -noinit"); + } + + if (check_label("vout")) + { + if (!vout_file.empty() || help_mode) + run(stringf("write_verilog -nodec -attr2comment -defparam -nohex -renameprefix yosys_ %s", + help_mode ? "" : vout_file.c_str())); + } + } +} SynthIntelPass; + +PRIVATE_NAMESPACE_END diff --git a/techlibs/altera_intel/Makefile.inc b/techlibs/altera_intel/Makefile.inc deleted file mode 100644 index 56ee56e88..000000000 --- a/techlibs/altera_intel/Makefile.inc +++ /dev/null @@ -1,10 +0,0 @@ - -OBJS += techlibs/altera_intel/synth_intel.o - -#$(eval $(call add_share_file,share/altera_intel,techlibs/altera_intel/lpm_functions.v)) -$(eval $(call add_share_file,share/altera_intel/max10,techlibs/altera_intel/max10/cells_comb_max10.v)) -$(eval $(call add_share_file,share/altera_intel/cycloneiv,techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v)) -$(eval $(call add_share_file,share/altera_intel/max10,techlibs/altera_intel/max10/cells_map_max10.v)) -$(eval $(call add_share_file,share/altera_intel/cycloneiv,techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v)) -#$(eval $(call add_share_file,share/altera_intel/max10,techlibs/altera_intel/max10/cells_arith_max10.v)) - diff --git a/techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v b/techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v deleted file mode 100644 index a65d0c991..000000000 --- a/techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v +++ /dev/null @@ -1,128 +0,0 @@ -/* - * yosys -- Yosys Open SYnthesis Suite - * - * Copyright (C) 2012 Clifford Wolf - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -module VCC (output V); - assign V = 1'b1; -endmodule // VCC - -module GND (output G); - assign G = 1'b0; -endmodule // GND - -/* Altera Cyclone IV (GX) devices Input Buffer Primitive */ -module cycloneiv_io_ibuf (output o, input i, input ibar); - assign ibar = ibar; - assign o = i; -endmodule // fiftyfivenm_io_ibuf - -/* Altera Cyclone IV (GX) devices Output Buffer Primitive */ -module cycloneiv_io_obuf (output o, input i, input oe); - assign o = i; - assign oe = oe; -endmodule // fiftyfivenm_io_obuf - -/* Altera MAX10 4-input non-fracturable LUT Primitive */ -module cycloneiv_lcell_comb (output combout, cout, - input dataa, datab, datac, datad, cin); - -/* Internal parameters which define the behaviour - of the LUT primitive. - lut_mask define the lut function, can be expressed in 16-digit bin or hex. - sum_lutc_input define the type of LUT (combinational | arithmetic). - dont_touch for retiming || carry options. - lpm_type for WYSIWYG */ - -parameter lut_mask = 16'hFFFF; -parameter dont_touch = "off"; -parameter lpm_type = "cycloneiv_lcell_comb"; -parameter sum_lutc_input = "datac"; - -reg [1:0] lut_type; -reg cout_rt; -reg combout_rt; -wire dataa_w; -wire datab_w; -wire datac_w; -wire datad_w; -wire cin_w; - -assign dataa_w = dataa; -assign datab_w = datab; -assign datac_w = datac; -assign datad_w = datad; - -function lut_data; -input [15:0] mask; -input dataa, datab, datac, datad; -reg [7:0] s3; -reg [3:0] s2; -reg [1:0] s1; - begin - s3 = datad ? mask[15:8] : mask[7:0]; - s2 = datac ? s3[7:4] : s3[3:0]; - s1 = datab ? s2[3:2] : s2[1:0]; - lut_data = dataa ? s1[1] : s1[0]; - end - -endfunction - -initial begin - if (sum_lutc_input == "datac") lut_type = 0; - else - if (sum_lutc_input == "cin") lut_type = 1; - else begin - $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input); - $finish(); - end -end - -always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin - if (lut_type == 0) begin // logic function - combout_rt = lut_data(lut_mask, dataa_w, datab_w, - datac_w, datad_w); - end - else if (lut_type == 1) begin // arithmetic function - combout_rt = lut_data(lut_mask, dataa_w, datab_w, - cin_w, datad_w); - end - cout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, 'b0); -end - -assign combout = combout_rt & 1'b1; -assign cout = cout_rt & 1'b1; - -endmodule // cycloneiv_lcell_comb - -/* Altera Cyclone IV Flip-Flop Primitive */ -// TODO: Implement advanced simulation functions -module dffeas ( output q, - input d, clk, clrn, prn, ena, - input asdata, aload, sclr, sload ); - -parameter power_up="dontcare"; -parameter is_wysiwyg="false"; - reg q; - - always @(posedge clk) - q <= d; - -endmodule - - - diff --git a/techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v b/techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v deleted file mode 100644 index e02332712..000000000 --- a/techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v +++ /dev/null @@ -1,61 +0,0 @@ -/* - * yosys -- Yosys Open SYnthesis Suite - * - * Copyright (C) 2012 Clifford Wolf - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -// Flip-flop D -module \$_DFF_P_ (input D, input C, output Q); - parameter WYSIWYG="TRUE"; - dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); -endmodule // - -// Input buffer map -module \$__inpad (input I, output O); - cycloneiv_io_ibuf _TECHMAP_REPLACE_ (.o(O), .i(I), .ibar(1'b0)); -endmodule - -// Output buffer map -module \$__outpad (input I, output O); - cycloneiv_io_obuf _TECHMAP_REPLACE_ (.o(O), .i(I), .oe(1'b1)); -endmodule - -// LUT Map -/* 0 -> datac - 1 -> cin */ -module \$lut (A, Y); - parameter WIDTH = 0; - parameter LUT = 0; - input [WIDTH-1:0] A; - output Y; - generate - if (WIDTH == 1) begin - assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function - end else - if (WIDTH == 2) begin - cycloneiv_lcell_comb #(.lut_mask({4{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(1'b1),.datad(1'b1)); - end else - if(WIDTH == 3) begin - cycloneiv_lcell_comb #(.lut_mask({2{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(1'b1)); - end else - if(WIDTH == 4) begin - cycloneiv_lcell_comb #(.lut_mask(LUT), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(A[3])); - end else - wire _TECHMAP_FAIL_ = 1; - endgenerate -endmodule // - - diff --git a/techlibs/altera_intel/lpm_functions.v b/techlibs/altera_intel/lpm_functions.v deleted file mode 100644 index b4d02dcb9..000000000 --- a/techlibs/altera_intel/lpm_functions.v +++ /dev/null @@ -1,319 +0,0 @@ -/* - * yosys -- Yosys Open SYnthesis Suite - * - * Copyright (C) 2012 Clifford Wolf - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -// NOTE: This is still WIP. -(* techmap_celltype = "$altpll" *) -module _80_altpll_altera ( input [1:0] inclk, - input fbin, - input pllena, - input clkswitch, - input areset, - input pfdena, - input clkena, - input extclkena, - input scanclk, - input scanaclr, - input scanclkena, - input scanread, - input scanwrite, - input scandata, - input phasecounterselect, - input phaseupdown, - input phasestep, - input configupdate, - inout fbmimicbidir, - - output [width_clock-1:0] clk, - output [3:0] extclk, - output [1:0] clkbad, - output enable0, - output enable1, - output activeclock, - output clkloss, - output locked, - output scandataout, - output scandone, - output sclkout0, - output sclkout1, - output phasedone, - output vcooverrange, - output vcounderrange, - output fbout, - output fref, - output icdrclk ); - - parameter intended_device_family = "MAX 10"; - parameter operation_mode = "NORMAL"; - parameter pll_type = "AUTO"; - parameter qualify_conf_done = "OFF"; - parameter compensate_clock = "CLK0"; - parameter scan_chain = "LONG"; - parameter primary_clock = "inclk0"; - parameter inclk0_input_frequency = 1000; - parameter inclk1_input_frequency = 0; - parameter gate_lock_signal = "NO"; - parameter gate_lock_counter = 0; - parameter lock_high = 1; - parameter lock_low = 0; - parameter valid_lock_multiplier = 1; - parameter invalid_lock_multiplier = 5; - parameter switch_over_type = "AUTO"; - parameter switch_over_on_lossclk = "OFF" ; - parameter switch_over_on_gated_lock = "OFF" ; - parameter enable_switch_over_counter = "OFF"; - parameter switch_over_counter = 0; - parameter feedback_source = "EXTCLK0" ; - parameter bandwidth = 0; - parameter bandwidth_type = "UNUSED"; - parameter lpm_hint = "UNUSED"; - parameter spread_frequency = 0; - parameter down_spread = "0.0"; - parameter self_reset_on_gated_loss_lock = "OFF"; - parameter self_reset_on_loss_lock = "OFF"; - parameter lock_window_ui = "0.05"; - parameter width_clock = 6; - parameter width_phasecounterselect = 4; - parameter charge_pump_current_bits = 9999; - parameter loop_filter_c_bits = 9999; - parameter loop_filter_r_bits = 9999; - parameter scan_chain_mif_file = "UNUSED"; - parameter clk9_multiply_by = 1; - parameter clk8_multiply_by = 1; - parameter clk7_multiply_by = 1; - parameter clk6_multiply_by = 1; - parameter clk5_multiply_by = 1; - parameter clk4_multiply_by = 1; - parameter clk3_multiply_by = 1; - parameter clk2_multiply_by = 1; - parameter clk1_multiply_by = 1; - parameter clk0_multiply_by = 1; - parameter clk9_divide_by = 1; - parameter clk8_divide_by = 1; - parameter clk7_divide_by = 1; - parameter clk6_divide_by = 1; - parameter clk5_divide_by = 1; - parameter clk4_divide_by = 1; - parameter clk3_divide_by = 1; - parameter clk2_divide_by = 1; - parameter clk1_divide_by = 1; - parameter clk0_divide_by = 1; - parameter clk9_phase_shift = "0"; - parameter clk8_phase_shift = "0"; - parameter clk7_phase_shift = "0"; - parameter clk6_phase_shift = "0"; - parameter clk5_phase_shift = "0"; - parameter clk4_phase_shift = "0"; - parameter clk3_phase_shift = "0"; - parameter clk2_phase_shift = "0"; - parameter clk1_phase_shift = "0"; - parameter clk0_phase_shift = "0"; - - parameter clk9_duty_cycle = 50; - parameter clk8_duty_cycle = 50; - parameter clk7_duty_cycle = 50; - parameter clk6_duty_cycle = 50; - parameter clk5_duty_cycle = 50; - parameter clk4_duty_cycle = 50; - parameter clk3_duty_cycle = 50; - parameter clk2_duty_cycle = 50; - parameter clk1_duty_cycle = 50; - parameter clk0_duty_cycle = 50; - - parameter clk9_use_even_counter_mode = "OFF"; - parameter clk8_use_even_counter_mode = "OFF"; - parameter clk7_use_even_counter_mode = "OFF"; - parameter clk6_use_even_counter_mode = "OFF"; - parameter clk5_use_even_counter_mode = "OFF"; - parameter clk4_use_even_counter_mode = "OFF"; - parameter clk3_use_even_counter_mode = "OFF"; - parameter clk2_use_even_counter_mode = "OFF"; - parameter clk1_use_even_counter_mode = "OFF"; - parameter clk0_use_even_counter_mode = "OFF"; - parameter clk9_use_even_counter_value = "OFF"; - parameter clk8_use_even_counter_value = "OFF"; - parameter clk7_use_even_counter_value = "OFF"; - parameter clk6_use_even_counter_value = "OFF"; - parameter clk5_use_even_counter_value = "OFF"; - parameter clk4_use_even_counter_value = "OFF"; - parameter clk3_use_even_counter_value = "OFF"; - parameter clk2_use_even_counter_value = "OFF"; - parameter clk1_use_even_counter_value = "OFF"; - parameter clk0_use_even_counter_value = "OFF"; - - parameter clk2_output_frequency = 0; - parameter clk1_output_frequency = 0; - parameter clk0_output_frequency = 0; - - parameter vco_min = 0; - parameter vco_max = 0; - parameter vco_center = 0; - parameter pfd_min = 0; - parameter pfd_max = 0; - parameter m_initial = 1; - parameter m = 0; - parameter n = 1; - parameter m2 = 1; - parameter n2 = 1; - parameter ss = 0; - parameter l0_high = 1; - parameter l1_high = 1; - parameter g0_high = 1; - parameter g1_high = 1; - parameter g2_high = 1; - parameter g3_high = 1; - parameter e0_high = 1; - parameter e1_high = 1; - parameter e2_high = 1; - parameter e3_high = 1; - parameter l0_low = 1; - parameter l1_low = 1; - parameter g0_low = 1; - parameter g1_low = 1; - parameter g2_low = 1; - parameter g3_low = 1; - parameter e0_low = 1; - parameter e1_low = 1; - parameter e2_low = 1; - parameter e3_low = 1; - parameter l0_initial = 1; - parameter l1_initial = 1; - parameter g0_initial = 1; - parameter g1_initial = 1; - parameter g2_initial = 1; - parameter g3_initial = 1; - parameter e0_initial = 1; - parameter e1_initial = 1; - parameter e2_initial = 1; - parameter e3_initial = 1; - parameter l0_mode = "bypass"; - parameter l1_mode = "bypass"; - parameter g0_mode = "bypass"; - parameter g1_mode = "bypass"; - parameter g2_mode = "bypass"; - parameter g3_mode = "bypass"; - parameter e0_mode = "bypass"; - parameter e1_mode = "bypass"; - parameter e2_mode = "bypass"; - parameter e3_mode = "bypass"; - parameter l0_ph = 0; - parameter l1_ph = 0; - parameter g0_ph = 0; - parameter g1_ph = 0; - parameter g2_ph = 0; - parameter g3_ph = 0; - parameter e0_ph = 0; - parameter e1_ph = 0; - parameter e2_ph = 0; - parameter e3_ph = 0; - parameter m_ph = 0; - parameter l0_time_delay = 0; - parameter l1_time_delay = 0; - parameter g0_time_delay = 0; - parameter g1_time_delay = 0; - parameter g2_time_delay = 0; - parameter g3_time_delay = 0; - parameter e0_time_delay = 0; - parameter e1_time_delay = 0; - parameter e2_time_delay = 0; - parameter e3_time_delay = 0; - parameter m_time_delay = 0; - parameter n_time_delay = 0; - parameter extclk3_counter = "e3" ; - parameter extclk2_counter = "e2" ; - parameter extclk1_counter = "e1" ; - parameter extclk0_counter = "e0" ; - parameter clk9_counter = "c9" ; - parameter clk8_counter = "c8" ; - parameter clk7_counter = "c7" ; - parameter clk6_counter = "c6" ; - parameter clk5_counter = "l1" ; - parameter clk4_counter = "l0" ; - parameter clk3_counter = "g3" ; - parameter clk2_counter = "g2" ; - parameter clk1_counter = "g1" ; - parameter clk0_counter = "g0" ; - parameter enable0_counter = "l0"; - parameter enable1_counter = "l0"; - parameter charge_pump_current = 2; - parameter loop_filter_r = "1.0"; - parameter loop_filter_c = 5; - parameter vco_post_scale = 0; - parameter vco_frequency_control = "AUTO"; - parameter vco_phase_shift_step = 0; - parameter lpm_type = "altpll"; - - parameter port_clkena0 = "PORT_CONNECTIVITY"; - parameter port_clkena1 = "PORT_CONNECTIVITY"; - parameter port_clkena2 = "PORT_CONNECTIVITY"; - parameter port_clkena3 = "PORT_CONNECTIVITY"; - parameter port_clkena4 = "PORT_CONNECTIVITY"; - parameter port_clkena5 = "PORT_CONNECTIVITY"; - parameter port_extclkena0 = "PORT_CONNECTIVITY"; - parameter port_extclkena1 = "PORT_CONNECTIVITY"; - parameter port_extclkena2 = "PORT_CONNECTIVITY"; - parameter port_extclkena3 = "PORT_CONNECTIVITY"; - parameter port_extclk0 = "PORT_CONNECTIVITY"; - parameter port_extclk1 = "PORT_CONNECTIVITY"; - parameter port_extclk2 = "PORT_CONNECTIVITY"; - parameter port_extclk3 = "PORT_CONNECTIVITY"; - parameter port_clk0 = "PORT_CONNECTIVITY"; - parameter port_clk1 = "PORT_CONNECTIVITY"; - parameter port_clk2 = "PORT_CONNECTIVITY"; - parameter port_clk3 = "PORT_CONNECTIVITY"; - parameter port_clk4 = "PORT_CONNECTIVITY"; - parameter port_clk5 = "PORT_CONNECTIVITY"; - parameter port_clk6 = "PORT_CONNECTIVITY"; - parameter port_clk7 = "PORT_CONNECTIVITY"; - parameter port_clk8 = "PORT_CONNECTIVITY"; - parameter port_clk9 = "PORT_CONNECTIVITY"; - parameter port_scandata = "PORT_CONNECTIVITY"; - parameter port_scandataout = "PORT_CONNECTIVITY"; - parameter port_scandone = "PORT_CONNECTIVITY"; - parameter port_sclkout1 = "PORT_CONNECTIVITY"; - parameter port_sclkout0 = "PORT_CONNECTIVITY"; - parameter port_clkbad0 = "PORT_CONNECTIVITY"; - parameter port_clkbad1 = "PORT_CONNECTIVITY"; - parameter port_activeclock = "PORT_CONNECTIVITY"; - parameter port_clkloss = "PORT_CONNECTIVITY"; - parameter port_inclk1 = "PORT_CONNECTIVITY"; - parameter port_inclk0 = "PORT_CONNECTIVITY"; - parameter port_fbin = "PORT_CONNECTIVITY"; - parameter port_fbout = "PORT_CONNECTIVITY"; - parameter port_pllena = "PORT_CONNECTIVITY"; - parameter port_clkswitch = "PORT_CONNECTIVITY"; - parameter port_areset = "PORT_CONNECTIVITY"; - parameter port_pfdena = "PORT_CONNECTIVITY"; - parameter port_scanclk = "PORT_CONNECTIVITY"; - parameter port_scanaclr = "PORT_CONNECTIVITY"; - parameter port_scanread = "PORT_CONNECTIVITY"; - parameter port_scanwrite = "PORT_CONNECTIVITY"; - parameter port_enable0 = "PORT_CONNECTIVITY"; - parameter port_enable1 = "PORT_CONNECTIVITY"; - parameter port_locked = "PORT_CONNECTIVITY"; - parameter port_configupdate = "PORT_CONNECTIVITY"; - parameter port_phasecounterselect = "PORT_CONNECTIVITY"; - parameter port_phasedone = "PORT_CONNECTIVITY"; - parameter port_phasestep = "PORT_CONNECTIVITY"; - parameter port_phaseupdown = "PORT_CONNECTIVITY"; - parameter port_vcooverrange = "PORT_CONNECTIVITY"; - parameter port_vcounderrange = "PORT_CONNECTIVITY"; - parameter port_scanclkena = "PORT_CONNECTIVITY"; - parameter using_fbmimicbidir_port = "ON"; - -endmodule diff --git a/techlibs/altera_intel/max10/cells_arith_max10.v b/techlibs/altera_intel/max10/cells_arith_max10.v deleted file mode 100644 index 82572fb5d..000000000 --- a/techlibs/altera_intel/max10/cells_arith_max10.v +++ /dev/null @@ -1,62 +0,0 @@ -/* - * yosys -- Yosys Open SYnthesis Suite - * - * Copyright (C) 2012 Clifford Wolf - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -// NOTE: This is still WIP. -(* techmap_celltype = "$alu" *) -module _80_altera_max10_alu (A, B, CI, BI, X, Y, CO); - parameter A_SIGNED = 0; - parameter B_SIGNED = 0; - parameter A_WIDTH = 1; - parameter B_WIDTH = 1; - parameter Y_WIDTH = 1; - parameter LUT = 0; - - input [A_WIDTH-1:0] A; - input [B_WIDTH-1:0] B; - output [Y_WIDTH-1:0] X, Y; - - input CI, BI; - output [Y_WIDTH-1:0] CO; - - wire _TECHMAP_FAIL_ = Y_WIDTH <= 2; - - wire tempcombout; - wire [Y_WIDTH-1:0] A_buf, B_buf; - \$pos #(.A_SIGNED(A_SIGNED), .A_WIDTH(A_WIDTH), .Y_WIDTH(Y_WIDTH)) A_conv (.A(A), .Y(A_buf)); - \$pos #(.A_SIGNED(B_SIGNED), .A_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) B_conv (.A(B), .Y(B_buf)); - - wire [Y_WIDTH-1:0] AA = A_buf; - wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf; - wire [Y_WIDTH-1:0] C = {CO, CI}; - - genvar i; - generate for (i = 0; i < Y_WIDTH; i = i + 1) begin:slice - fiftyfivenm_lcell_comb #(.lut_mask(LUT), .sum_lutc_input("cin")) _TECHMAP_REPLACE_ - ( .dataa(AA), - .datab(BB), - .datac(C), - .datad(1'b0), - .cin(C[i]), - .cout(CO[i]), - .combout(Y[i]) ); - end: slice - endgenerate - assign X = C; -endmodule - diff --git a/techlibs/altera_intel/max10/cells_comb_max10.v b/techlibs/altera_intel/max10/cells_comb_max10.v deleted file mode 100644 index 51adb72e2..000000000 --- a/techlibs/altera_intel/max10/cells_comb_max10.v +++ /dev/null @@ -1,128 +0,0 @@ -/* - * yosys -- Yosys Open SYnthesis Suite - * - * Copyright (C) 2012 Clifford Wolf - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -module VCC (output V); - assign V = 1'b1; -endmodule // VCC - -module GND (output G); - assign G = 1'b0; -endmodule // GND - -/* Altera MAX10 devices Input Buffer Primitive */ -module fiftyfivenm_io_ibuf (output o, input i, input ibar); - assign ibar = ibar; - assign o = i; -endmodule // fiftyfivenm_io_ibuf - -/* Altera MAX10 devices Output Buffer Primitive */ -module fiftyfivenm_io_obuf (output o, input i, input oe); - assign o = i; - assign oe = oe; -endmodule // fiftyfivenm_io_obuf - -/* Altera MAX10 4-input non-fracturable LUT Primitive */ -module fiftyfivenm_lcell_comb (output combout, cout, - input dataa, datab, datac, datad, cin); - -/* Internal parameters which define the behaviour - of the LUT primitive. - lut_mask define the lut function, can be expressed in 16-digit bin or hex. - sum_lutc_input define the type of LUT (combinational | arithmetic). - dont_touch for retiming || carry options. - lpm_type for WYSIWYG */ - -parameter lut_mask = 16'hFFFF; -parameter dont_touch = "off"; -parameter lpm_type = "fiftyfivenm_lcell_comb"; -parameter sum_lutc_input = "datac"; - -reg [1:0] lut_type; -reg cout_rt; -reg combout_rt; -wire dataa_w; -wire datab_w; -wire datac_w; -wire datad_w; -wire cin_w; - -assign dataa_w = dataa; -assign datab_w = datab; -assign datac_w = datac; -assign datad_w = datad; - -function lut_data; -input [15:0] mask; -input dataa, datab, datac, datad; -reg [7:0] s3; -reg [3:0] s2; -reg [1:0] s1; - begin - s3 = datad ? mask[15:8] : mask[7:0]; - s2 = datac ? s3[7:4] : s3[3:0]; - s1 = datab ? s2[3:2] : s2[1:0]; - lut_data = dataa ? s1[1] : s1[0]; - end - -endfunction - -initial begin - if (sum_lutc_input == "datac") lut_type = 0; - else - if (sum_lutc_input == "cin") lut_type = 1; - else begin - $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input); - $finish(); - end -end - -always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin - if (lut_type == 0) begin // logic function - combout_rt = lut_data(lut_mask, dataa_w, datab_w, - datac_w, datad_w); - end - else if (lut_type == 1) begin // arithmetic function - combout_rt = lut_data(lut_mask, dataa_w, datab_w, - cin_w, datad_w); - end - cout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, 'b0); -end - -assign combout = combout_rt & 1'b1; -assign cout = cout_rt & 1'b1; - -endmodule // fiftyfivenm_lcell_comb - -/* Altera MAX10 D Flip-Flop Primitive */ -// TODO: Implement advanced simulation functions -module dffeas ( output q, - input d, clk, clrn, prn, ena, - input asdata, aload, sclr, sload ); - -parameter power_up="dontcare"; -parameter is_wysiwyg="false"; - reg q; - - always @(posedge clk) - q <= d; - -endmodule - - - diff --git a/techlibs/altera_intel/max10/cells_map_max10.v b/techlibs/altera_intel/max10/cells_map_max10.v deleted file mode 100644 index ed63c521b..000000000 --- a/techlibs/altera_intel/max10/cells_map_max10.v +++ /dev/null @@ -1,61 +0,0 @@ -/* - * yosys -- Yosys Open SYnthesis Suite - * - * Copyright (C) 2012 Clifford Wolf - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -// Flip-flop D -module \$_DFF_P_ (input D, input C, output Q); - parameter WYSIWYG="TRUE"; - dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); -endmodule // - -// Input buffer map -module \$__inpad (input I, output O); - fiftyfivenm_io_ibuf _TECHMAP_REPLACE_ (.o(O), .i(I), .ibar(1'b0)); -endmodule - -// Output buffer map -module \$__outpad (input I, output O); - fiftyfivenm_io_obuf _TECHMAP_REPLACE_ (.o(O), .i(I), .oe(1'b1)); -endmodule - -// LUT Map -/* 0 -> datac - 1 -> cin */ -module \$lut (A, Y); - parameter WIDTH = 0; - parameter LUT = 0; - input [WIDTH-1:0] A; - output Y; - generate - if (WIDTH == 1) begin - assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function - end else - if (WIDTH == 2) begin - fiftyfivenm_lcell_comb #(.lut_mask({4{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(1'b1),.datad(1'b1)); - end else - if(WIDTH == 3) begin - fiftyfivenm_lcell_comb #(.lut_mask({2{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(1'b1)); - end else - if(WIDTH == 4) begin - fiftyfivenm_lcell_comb #(.lut_mask(LUT), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(A[3])); - end else - wire _TECHMAP_FAIL_ = 1; - endgenerate -endmodule // - - diff --git a/techlibs/altera_intel/synth_intel.cc b/techlibs/altera_intel/synth_intel.cc deleted file mode 100644 index 003059458..000000000 --- a/techlibs/altera_intel/synth_intel.cc +++ /dev/null @@ -1,199 +0,0 @@ -/* - * yosys -- Yosys Open SYnthesis Suite - * - * Copyright (C) 2012 Clifford Wolf - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "kernel/register.h" -#include "kernel/celltypes.h" -#include "kernel/rtlil.h" -#include "kernel/log.h" - -USING_YOSYS_NAMESPACE -PRIVATE_NAMESPACE_BEGIN - -struct SynthIntelPass : public ScriptPass { - SynthIntelPass() : ScriptPass("synth_intel", "synthesis for Intel (Altera) FPGAs.") { } - - virtual void help() YS_OVERRIDE - { - // |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---| - log("\n"); - log(" synth_intel [options]\n"); - log("\n"); - log("This command runs synthesis for Intel FPGAs. This work is still experimental.\n"); - log("\n"); - log(" -family < max10 | cycloneiv >\n"); - log(" generate the synthesis netlist for the specified family.\n"); - log(" MAX10 is the default target if not family argument specified \n"); - log("\n"); - log(" -top \n"); - log(" use the specified module as top module (default='top')\n"); - log("\n"); - log(" -vout \n"); - log(" write the design to the specified Verilog netlist file. writing of an\n"); - log(" output file is omitted if this parameter is not specified.\n"); - log("\n"); - log(" -run :\n"); - log(" only run the commands between the labels (see below). an empty\n"); - log(" from label is synonymous to 'begin', and empty to label is\n"); - log(" synonymous to the end of the command list.\n"); - log("\n"); - log(" -retime\n"); - log(" run 'abc' with -dff option\n"); - log("\n"); - log("\n"); - log("The following commands are executed by this synthesis command:\n"); - help_script(); - log("\n"); - } - - string top_opt, family_opt, vout_file; - bool retime; - - virtual void clear_flags() YS_OVERRIDE - { - top_opt = "-auto-top"; - family_opt = "max10"; - vout_file = ""; - retime = false; - } - - virtual void execute(std::vector args, RTLIL::Design *design) YS_OVERRIDE - { - string run_from, run_to; - clear_flags(); - - size_t argidx; - for (argidx = 1; argidx < args.size(); argidx++) - { - if (args[argidx] == "-family" && argidx+1 < args.size()) { - family_opt = args[++argidx]; - continue; - } - if (args[argidx] == "-top" && argidx+1 < args.size()) { - top_opt = "-top " + args[++argidx]; - continue; - } - if (args[argidx] == "-vout" && argidx+1 < args.size()) { - vout_file = args[++argidx]; - continue; - } - if (args[argidx] == "-run" && argidx+1 < args.size()) { - size_t pos = args[argidx+1].find(':'); - if (pos == std::string::npos) - break; - run_from = args[++argidx].substr(0, pos); - run_to = args[argidx].substr(pos+1); - continue; - } - if (args[argidx] == "-retime") { - retime = true; - continue; - } - break; - } - extra_args(args, argidx, design); - - if (!design->full_selection()) - log_cmd_error("This comannd only operates on fully selected designs!\n"); - - if (family_opt != "max10" && family_opt !="cycloneiv" ) - log_cmd_error("Invalid or not family specified: '%s'\n", family_opt.c_str()); - - log_header(design, "Executing SYNTH_INTEL pass.\n"); - log_push(); - - run_script(design, run_from, run_to); - - log_pop(); - } - - virtual void script() YS_OVERRIDE - { - if (check_label("begin")) - { - if(check_label("family") && family_opt=="max10") - { - run("read_verilog -lib +/altera_intel/max10/cells_comb_max10.v"); - run(stringf("hierarchy -check %s", help_mode ? "-top " : top_opt.c_str())); - } - else - { - run("read_verilog -lib +/altera_intel/cycloneiv/cells_comb_cycloneiv.v"); - run(stringf("hierarchy -check %s", help_mode ? "-top " : top_opt.c_str())); - } - } - - if (check_label("flatten")) - { - run("proc"); - run("flatten"); - run("tribuf -logic"); - run("deminout"); - } - - if (check_label("coarse")) - { - run("synth -run coarse"); - } - - if (check_label("fine")) - { - run("opt -fast -full"); - run("memory_map"); - run("opt -full"); - run("techmap -map +/techmap.v"); - run("opt -fast"); - run("clean -purge"); - run("setundef -undriven -zero"); - if (retime || help_mode) - run("abc -dff", "(only if -retime)"); - } - - if (check_label("map_luts")) - { - run("abc -lut 4"); - run("clean"); - } - - if (check_label("map_cells")) - { - run("iopadmap -bits -outpad $__outpad I:O -inpad $__inpad O:I"); - if(family_opt=="max10") - run("techmap -map +/altera_intel/max10/cells_map_max10.v"); - else - run("techmap -map +/altera_intel/cycloneiv/cells_map_cycloneiv.v"); - run("clean -purge"); - } - - if (check_label("check")) - { - run("hierarchy -check"); - run("stat"); - run("check -noinit"); - } - - if (check_label("vout")) - { - if (!vout_file.empty() || help_mode) - run(stringf("write_verilog -nodec -attr2comment -defparam -nohex -renameprefix yosys_ %s", - help_mode ? "" : vout_file.c_str())); - } - } -} SynthIntelPass; - -PRIVATE_NAMESPACE_END diff --git a/techlibs/intel/Makefile.inc b/techlibs/intel/Makefile.inc new file mode 100755 index 000000000..429d23677 --- /dev/null +++ b/techlibs/intel/Makefile.inc @@ -0,0 +1,22 @@ + +OBJS += techlibs/intel/synth_intel.o + +$(eval $(call add_share_file,share/intel/common,techlibs/intel/common/m9k_bb.v)) +$(eval $(call add_share_file,share/intel/common,techlibs/intel/common/altpll_bb.v)) +$(eval $(call add_share_file,share/intel/common,techlibs/intel/common/brams.txt)) +$(eval $(call add_share_file,share/intel/common,techlibs/intel/common/brams_map.v)) +$(eval $(call add_share_file,share/intel/max10,techlibs/intel/max10/cells_sim.v)) +$(eval $(call add_share_file,share/intel/a10gx,techlibs/intel/a10gx/cells_sim.v)) +$(eval $(call add_share_file,share/intel/cyclonev,techlibs/intel/cyclonev/cells_sim.v)) +$(eval $(call add_share_file,share/intel/cycloneiv,techlibs/intel/cycloneiv/cells_sim.v)) +$(eval $(call add_share_file,share/intel/cycloneive,techlibs/intel/cycloneive/cells_sim.v)) +$(eval $(call add_share_file,share/intel/max10,techlibs/intel/max10/cells_map.v)) +$(eval $(call add_share_file,share/intel/a10gx,techlibs/intel/a10gx/cells_map.v)) +$(eval $(call add_share_file,share/intel/cyclonev,techlibs/intel/cyclonev/cells_map.v)) +$(eval $(call add_share_file,share/intel/cycloneiv,techlibs/intel/cycloneiv/cells_map.v)) +$(eval $(call add_share_file,share/intel/cycloneive,techlibs/intel/cycloneive/cells_map.v)) +#$(eval $(call add_share_file,share/intel/max10,techlibs/intel/max10/arith_map.v)) +#$(eval $(call add_share_file,share/intel/a10gx,techlibs/intel/a10gx/arith_map.v)) +#$(eval $(call add_share_file,share/intel/cycloneiv,techlibs/intel/cycloneiv/arith_map.v)) +#$(eval $(call add_share_file,share/intel/cycloneive,techlibs/intel/cycloneive/arith_map.v)) + diff --git a/techlibs/intel/a10gx/cells_arith.v b/techlibs/intel/a10gx/cells_arith.v new file mode 100755 index 000000000..470b686bb --- /dev/null +++ b/techlibs/intel/a10gx/cells_arith.v @@ -0,0 +1,65 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +// NOTE: This is still WIP. +(* techmap_celltype = "$alu" *) +module _80_altera_a10gx_alu (A, B, CI, BI, X, Y, CO); + parameter A_SIGNED = 0; + parameter B_SIGNED = 0; + parameter A_WIDTH = 1; + parameter B_WIDTH = 1; + parameter Y_WIDTH = 1; + + input [A_WIDTH-1:0] A; + input [B_WIDTH-1:0] B; + output [Y_WIDTH-1:0] X, Y; + + input CI, BI; + //output [Y_WIDTH-1:0] CO; + output CO; + + wire _TECHMAP_FAIL_ = Y_WIDTH <= 4; + + wire [Y_WIDTH-1:0] A_buf, B_buf; + \$pos #(.A_SIGNED(A_SIGNED), .A_WIDTH(A_WIDTH), .Y_WIDTH(Y_WIDTH)) A_conv (.A(A), .Y(A_buf)); + \$pos #(.A_SIGNED(B_SIGNED), .A_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) B_conv (.A(B), .Y(B_buf)); + + wire [Y_WIDTH-1:0] AA = A_buf; + wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf; + //wire [Y_WIDTH:0] C = {CO, CI}; + wire [Y_WIDTH+1:0] COx; + wire [Y_WIDTH+1:0] C = {COx, CI}; + + /* Start implementation */ + (* keep *) fiftyfivenm_lcell_comb #(.lut_mask(16'b0000_0000_1010_1010), .sum_lutc_input("cin")) carry_start (.cout(COx[0]), .dataa(C[0]), .datab(1'b1), .datac(1'b1), .datad(1'b1)); + + genvar i; + generate for (i = 0; i < Y_WIDTH; i = i + 1) begin: slice + if(i==Y_WIDTH-1) begin + (* keep *) fiftyfivenm_lcell_comb #(.lut_mask(16'b1111_0000_1110_0000), .sum_lutc_input("cin")) carry_end (.combout(COx[Y_WIDTH]), .dataa(1'b1), .datab(1'b1), .datac(1'b1), .datad(1'b1), .cin(C[Y_WIDTH])); + assign CO = COx[Y_WIDTH]; + end + else + fiftyfivenm_lcell_comb #(.lut_mask(16'b1001_0110_1110_1000), .sum_lutc_input("cin")) arith_cell (.combout(Y[i]), .cout(COx[i+1]), .dataa(AA[i]), .datab(BB[i]), .datac(1'b1), .datad(1'b1), .cin(C[i+1])); + end: slice + endgenerate + /* End implementation */ + assign X = AA ^ BB; + +endmodule diff --git a/techlibs/intel/a10gx/cells_map.v b/techlibs/intel/a10gx/cells_map.v new file mode 100755 index 000000000..42e7926b8 --- /dev/null +++ b/techlibs/intel/a10gx/cells_map.v @@ -0,0 +1,53 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +// Input buffer map +module \$__inpad (input I, output O); + twentynm_io_ibuf _TECHMAP_REPLACE_ (.o(O), .i(I), .ibar(1'b0)); +endmodule + +// Output buffer map +module \$__outpad (input I, output O); + twentynm_io_obuf _TECHMAP_REPLACE_ (.o(O), .i(I), .oe(1'b1)); +endmodule + +// LUT Map +module \$lut (A, Y); + parameter WIDTH = 0; + parameter LUT = 0; + input [WIDTH-1:0] A; + output Y; + generate + if (WIDTH == 1) begin + assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function + end else + if (WIDTH == 2) begin + twentynm_lcell_comb #(.lut_mask({16{LUT}}), .shared_arith("off"), .extended_lut("off")) + _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(1'b1),.datad(1'b1), .datae(1'b1), .dataf(1'b1), .datag(1'b1)); + end /*else + if(WIDTH == 3) begin + fiftyfivenm_lcell_comb #(.lut_mask({2{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(1'b1)); + end else + if(WIDTH == 4) begin + fiftyfivenm_lcell_comb #(.lut_mask(LUT), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(A[3])); + end*/ else + wire _TECHMAP_FAIL_ = 1; + endgenerate +endmodule // + + diff --git a/techlibs/intel/a10gx/cells_sim.v b/techlibs/intel/a10gx/cells_sim.v new file mode 100755 index 000000000..1888682ef --- /dev/null +++ b/techlibs/intel/a10gx/cells_sim.v @@ -0,0 +1,59 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +module VCC (output V); + assign V = 1'b1; +endmodule // VCC + +module GND (output G); + assign G = 1'b0; +endmodule // GND + +/* Altera Arria 10 GX devices Input Buffer Primitive */ +module twentynm_io_ibuf (output o, input i, input ibar); + assign ibar = ibar; + assign o = i; +endmodule // twentynm_io_ibuf + +/* Altera Arria 10 GX devices Output Buffer Primitive */ +module twentynm_io_obuf (output o, input i, input oe); + assign o = i; + assign oe = oe; +endmodule // twentynm_io_obuf + +/* Altera Arria 10 GX LUT Primitive */ +module twentynm_lcell_comb (output combout, cout, sumout, + input dataa, datab, datac, datad, + input datae, dataf, datag, cin, + input sharein); + +parameter lut_mask = 64'hFFFFFFFFFFFFFFFF; +parameter dont_touch = "off"; +parameter lpm_type = "twentynm_lcell_comb"; +parameter shared_arith = "off"; +parameter extended_lut = "off"; + +// TODO: This is still WIP +initial begin + $display("Simulation model is still under investigation\n"); +end + +endmodule // twentynm_lcell_comb + + + diff --git a/techlibs/intel/common/altpll_bb.v b/techlibs/intel/common/altpll_bb.v new file mode 100644 index 000000000..27eef0f86 --- /dev/null +++ b/techlibs/intel/common/altpll_bb.v @@ -0,0 +1,366 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +/* No clearbox model */ +`ifdef NO_CLEARBOX +(* blackbox *) +module altpll + ( inclk, + fbin, + pllena, + clkswitch, + areset, + pfdena, + clkena, + extclkena, + scanclk, + scanaclr, + scanclkena, + scanread, + scanwrite, + scandata, + phasecounterselect, + phaseupdown, + phasestep, + configupdate, + fbmimicbidir, + clk, + extclk, + clkbad, + enable0, + enable1, + activeclock, + clkloss, + locked, + scandataout, + scandone, + sclkout0, + sclkout1, + phasedone, + vcooverrange, + vcounderrange, + fbout, + fref, + icdrclk, + c0, + c1, + c2, + c3, + c4); + + parameter intended_device_family = "MAX 10"; + parameter operation_mode = "NORMAL"; + parameter pll_type = "AUTO"; + parameter qualify_conf_done = "OFF"; + parameter compensate_clock = "CLK0"; + parameter scan_chain = "LONG"; + parameter primary_clock = "inclk0"; + parameter inclk0_input_frequency = 1000; + parameter inclk1_input_frequency = 0; + parameter gate_lock_signal = "NO"; + parameter gate_lock_counter = 0; + parameter lock_high = 1; + parameter lock_low = 0; + parameter valid_lock_multiplier = 1; + parameter invalid_lock_multiplier = 5; + parameter switch_over_type = "AUTO"; + parameter switch_over_on_lossclk = "OFF" ; + parameter switch_over_on_gated_lock = "OFF" ; + parameter enable_switch_over_counter = "OFF"; + parameter switch_over_counter = 0; + parameter feedback_source = "EXTCLK0" ; + parameter bandwidth = 0; + parameter bandwidth_type = "UNUSED"; + parameter lpm_hint = "UNUSED"; + parameter spread_frequency = 0; + parameter down_spread = "0.0"; + parameter self_reset_on_gated_loss_lock = "OFF"; + parameter self_reset_on_loss_lock = "OFF"; + parameter lock_window_ui = "0.05"; + parameter width_clock = 6; + parameter width_phasecounterselect = 4; + parameter charge_pump_current_bits = 9999; + parameter loop_filter_c_bits = 9999; + parameter loop_filter_r_bits = 9999; + parameter scan_chain_mif_file = "UNUSED"; + parameter clk9_multiply_by = 1; + parameter clk8_multiply_by = 1; + parameter clk7_multiply_by = 1; + parameter clk6_multiply_by = 1; + parameter clk5_multiply_by = 1; + parameter clk4_multiply_by = 1; + parameter clk3_multiply_by = 1; + parameter clk2_multiply_by = 1; + parameter clk1_multiply_by = 1; + parameter clk0_multiply_by = 1; + parameter clk9_divide_by = 1; + parameter clk8_divide_by = 1; + parameter clk7_divide_by = 1; + parameter clk6_divide_by = 1; + parameter clk5_divide_by = 1; + parameter clk4_divide_by = 1; + parameter clk3_divide_by = 1; + parameter clk2_divide_by = 1; + parameter clk1_divide_by = 1; + parameter clk0_divide_by = 1; + parameter clk9_phase_shift = "0"; + parameter clk8_phase_shift = "0"; + parameter clk7_phase_shift = "0"; + parameter clk6_phase_shift = "0"; + parameter clk5_phase_shift = "0"; + parameter clk4_phase_shift = "0"; + parameter clk3_phase_shift = "0"; + parameter clk2_phase_shift = "0"; + parameter clk1_phase_shift = "0"; + parameter clk0_phase_shift = "0"; + + parameter clk9_duty_cycle = 50; + parameter clk8_duty_cycle = 50; + parameter clk7_duty_cycle = 50; + parameter clk6_duty_cycle = 50; + parameter clk5_duty_cycle = 50; + parameter clk4_duty_cycle = 50; + parameter clk3_duty_cycle = 50; + parameter clk2_duty_cycle = 50; + parameter clk1_duty_cycle = 50; + parameter clk0_duty_cycle = 50; + + parameter clk9_use_even_counter_mode = "OFF"; + parameter clk8_use_even_counter_mode = "OFF"; + parameter clk7_use_even_counter_mode = "OFF"; + parameter clk6_use_even_counter_mode = "OFF"; + parameter clk5_use_even_counter_mode = "OFF"; + parameter clk4_use_even_counter_mode = "OFF"; + parameter clk3_use_even_counter_mode = "OFF"; + parameter clk2_use_even_counter_mode = "OFF"; + parameter clk1_use_even_counter_mode = "OFF"; + parameter clk0_use_even_counter_mode = "OFF"; + parameter clk9_use_even_counter_value = "OFF"; + parameter clk8_use_even_counter_value = "OFF"; + parameter clk7_use_even_counter_value = "OFF"; + parameter clk6_use_even_counter_value = "OFF"; + parameter clk5_use_even_counter_value = "OFF"; + parameter clk4_use_even_counter_value = "OFF"; + parameter clk3_use_even_counter_value = "OFF"; + parameter clk2_use_even_counter_value = "OFF"; + parameter clk1_use_even_counter_value = "OFF"; + parameter clk0_use_even_counter_value = "OFF"; + + parameter clk2_output_frequency = 0; + parameter clk1_output_frequency = 0; + parameter clk0_output_frequency = 0; + + parameter vco_min = 0; + parameter vco_max = 0; + parameter vco_center = 0; + parameter pfd_min = 0; + parameter pfd_max = 0; + parameter m_initial = 1; + parameter m = 0; + parameter n = 1; + parameter m2 = 1; + parameter n2 = 1; + parameter ss = 0; + parameter l0_high = 1; + parameter l1_high = 1; + parameter g0_high = 1; + parameter g1_high = 1; + parameter g2_high = 1; + parameter g3_high = 1; + parameter e0_high = 1; + parameter e1_high = 1; + parameter e2_high = 1; + parameter e3_high = 1; + parameter l0_low = 1; + parameter l1_low = 1; + parameter g0_low = 1; + parameter g1_low = 1; + parameter g2_low = 1; + parameter g3_low = 1; + parameter e0_low = 1; + parameter e1_low = 1; + parameter e2_low = 1; + parameter e3_low = 1; + parameter l0_initial = 1; + parameter l1_initial = 1; + parameter g0_initial = 1; + parameter g1_initial = 1; + parameter g2_initial = 1; + parameter g3_initial = 1; + parameter e0_initial = 1; + parameter e1_initial = 1; + parameter e2_initial = 1; + parameter e3_initial = 1; + parameter l0_mode = "bypass"; + parameter l1_mode = "bypass"; + parameter g0_mode = "bypass"; + parameter g1_mode = "bypass"; + parameter g2_mode = "bypass"; + parameter g3_mode = "bypass"; + parameter e0_mode = "bypass"; + parameter e1_mode = "bypass"; + parameter e2_mode = "bypass"; + parameter e3_mode = "bypass"; + parameter l0_ph = 0; + parameter l1_ph = 0; + parameter g0_ph = 0; + parameter g1_ph = 0; + parameter g2_ph = 0; + parameter g3_ph = 0; + parameter e0_ph = 0; + parameter e1_ph = 0; + parameter e2_ph = 0; + parameter e3_ph = 0; + parameter m_ph = 0; + parameter l0_time_delay = 0; + parameter l1_time_delay = 0; + parameter g0_time_delay = 0; + parameter g1_time_delay = 0; + parameter g2_time_delay = 0; + parameter g3_time_delay = 0; + parameter e0_time_delay = 0; + parameter e1_time_delay = 0; + parameter e2_time_delay = 0; + parameter e3_time_delay = 0; + parameter m_time_delay = 0; + parameter n_time_delay = 0; + parameter extclk3_counter = "e3" ; + parameter extclk2_counter = "e2" ; + parameter extclk1_counter = "e1" ; + parameter extclk0_counter = "e0" ; + parameter clk9_counter = "c9" ; + parameter clk8_counter = "c8" ; + parameter clk7_counter = "c7" ; + parameter clk6_counter = "c6" ; + parameter clk5_counter = "l1" ; + parameter clk4_counter = "l0" ; + parameter clk3_counter = "g3" ; + parameter clk2_counter = "g2" ; + parameter clk1_counter = "g1" ; + parameter clk0_counter = "g0" ; + parameter enable0_counter = "l0"; + parameter enable1_counter = "l0"; + parameter charge_pump_current = 2; + parameter loop_filter_r = "1.0"; + parameter loop_filter_c = 5; + parameter vco_post_scale = 0; + parameter vco_frequency_control = "AUTO"; + parameter vco_phase_shift_step = 0; + parameter lpm_type = "altpll"; + + parameter port_clkena0 = "PORT_CONNECTIVITY"; + parameter port_clkena1 = "PORT_CONNECTIVITY"; + parameter port_clkena2 = "PORT_CONNECTIVITY"; + parameter port_clkena3 = "PORT_CONNECTIVITY"; + parameter port_clkena4 = "PORT_CONNECTIVITY"; + parameter port_clkena5 = "PORT_CONNECTIVITY"; + parameter port_extclkena0 = "PORT_CONNECTIVITY"; + parameter port_extclkena1 = "PORT_CONNECTIVITY"; + parameter port_extclkena2 = "PORT_CONNECTIVITY"; + parameter port_extclkena3 = "PORT_CONNECTIVITY"; + parameter port_extclk0 = "PORT_CONNECTIVITY"; + parameter port_extclk1 = "PORT_CONNECTIVITY"; + parameter port_extclk2 = "PORT_CONNECTIVITY"; + parameter port_extclk3 = "PORT_CONNECTIVITY"; + parameter port_clk0 = "PORT_CONNECTIVITY"; + parameter port_clk1 = "PORT_CONNECTIVITY"; + parameter port_clk2 = "PORT_CONNECTIVITY"; + parameter port_clk3 = "PORT_CONNECTIVITY"; + parameter port_clk4 = "PORT_CONNECTIVITY"; + parameter port_clk5 = "PORT_CONNECTIVITY"; + parameter port_clk6 = "PORT_CONNECTIVITY"; + parameter port_clk7 = "PORT_CONNECTIVITY"; + parameter port_clk8 = "PORT_CONNECTIVITY"; + parameter port_clk9 = "PORT_CONNECTIVITY"; + parameter port_scandata = "PORT_CONNECTIVITY"; + parameter port_scandataout = "PORT_CONNECTIVITY"; + parameter port_scandone = "PORT_CONNECTIVITY"; + parameter port_sclkout1 = "PORT_CONNECTIVITY"; + parameter port_sclkout0 = "PORT_CONNECTIVITY"; + parameter port_clkbad0 = "PORT_CONNECTIVITY"; + parameter port_clkbad1 = "PORT_CONNECTIVITY"; + parameter port_activeclock = "PORT_CONNECTIVITY"; + parameter port_clkloss = "PORT_CONNECTIVITY"; + parameter port_inclk1 = "PORT_CONNECTIVITY"; + parameter port_inclk0 = "PORT_CONNECTIVITY"; + parameter port_fbin = "PORT_CONNECTIVITY"; + parameter port_fbout = "PORT_CONNECTIVITY"; + parameter port_pllena = "PORT_CONNECTIVITY"; + parameter port_clkswitch = "PORT_CONNECTIVITY"; + parameter port_areset = "PORT_CONNECTIVITY"; + parameter port_pfdena = "PORT_CONNECTIVITY"; + parameter port_scanclk = "PORT_CONNECTIVITY"; + parameter port_scanaclr = "PORT_CONNECTIVITY"; + parameter port_scanread = "PORT_CONNECTIVITY"; + parameter port_scanwrite = "PORT_CONNECTIVITY"; + parameter port_enable0 = "PORT_CONNECTIVITY"; + parameter port_enable1 = "PORT_CONNECTIVITY"; + parameter port_locked = "PORT_CONNECTIVITY"; + parameter port_configupdate = "PORT_CONNECTIVITY"; + parameter port_phasecounterselect = "PORT_CONNECTIVITY"; + parameter port_phasedone = "PORT_CONNECTIVITY"; + parameter port_phasestep = "PORT_CONNECTIVITY"; + parameter port_phaseupdown = "PORT_CONNECTIVITY"; + parameter port_vcooverrange = "PORT_CONNECTIVITY"; + parameter port_vcounderrange = "PORT_CONNECTIVITY"; + parameter port_scanclkena = "PORT_CONNECTIVITY"; + parameter using_fbmimicbidir_port = "ON"; + + input [1:0] inclk; + input fbin; + input pllena; + input clkswitch; + input areset; + input pfdena; + input clkena; + input extclkena; + input scanclk; + input scanaclr; + input scanclkena; + input scanread; + input scanwrite; + input scandata; + input phasecounterselect; + input phaseupdown; + input phasestep; + input configupdate; + inout fbmimicbidir; + + + output [width_clock-1:0] clk; + output [3:0] extclk; + output [1:0] clkbad; + output enable0; + output enable1; + output activeclock; + output clkloss; + output locked; + output scandataout; + output scandone; + output sclkout0; + output sclkout1; + output phasedone; + output vcooverrange; + output vcounderrange; + output fbout; + output fref; + output icdrclk; + output c0, c1, c2, c3, c4; + +endmodule // altpll +`endif diff --git a/techlibs/intel/common/brams.txt b/techlibs/intel/common/brams.txt new file mode 100755 index 000000000..3bf21afc9 --- /dev/null +++ b/techlibs/intel/common/brams.txt @@ -0,0 +1,33 @@ +bram $__M9K_ALTSYNCRAM_SINGLEPORT_FULL + init 1 + abits 13 @M1 + dbits 1 @M1 + abits 12 @M2 + dbits 2 @M2 + abits 11 @M3 + dbits 4 @M3 + abits 10 @M4 + dbits 8 @M4 + abits 10 @M5 + dbits 9 @M5 + abits 9 @M6 + dbits 16 @M6 + abits 9 @M7 + dbits 18 @M7 + abits 8 @M8 + dbits 32 @M8 + abits 8 @M9 + dbits 36 @M9 + groups 2 + ports 1 1 + wrmode 0 1 + enable 1 1 + transp 0 0 + clocks 2 3 + clkpol 2 3 +endbram + +match $__M9K_ALTSYNCRAM_SINGLEPORT_FULL + min efficiency 2 + make_transp +endmatch diff --git a/techlibs/intel/common/brams_map.v b/techlibs/intel/common/brams_map.v new file mode 100755 index 000000000..b9938fe95 --- /dev/null +++ b/techlibs/intel/common/brams_map.v @@ -0,0 +1,95 @@ +module \$__M9K_ALTSYNCRAM_SINGLEPORT_FULL (CLK2, CLK3, A1ADDR, A1DATA, A1EN, B1ADDR, B1DATA, B1EN); + + parameter CFG_ABITS = 8; + parameter CFG_DBITS = 36; + parameter ABITS = "1"; + parameter DBITS = "1"; + parameter CLKPOL2 = 1; + parameter CLKPOL3 = 1; + + input CLK2; + input CLK3; + //Read data + output [CFG_DBITS-1:0] A1DATA; + input [CFG_ABITS-1:0] A1ADDR; + input A1EN; + //Write data + output [CFG_DBITS-1:0] B1DATA; + input [CFG_ABITS-1:0] B1ADDR; + input B1EN; + + wire [CFG_DBITS-1:0] B1DATA_t; + + localparam MODE = CFG_DBITS == 1 ? 1: + CFG_DBITS == 2 ? 2: + CFG_DBITS == 4 ? 3: + CFG_DBITS == 8 ? 4: + CFG_DBITS == 9 ? 5: + CFG_DBITS == 16 ? 6: + CFG_DBITS == 18 ? 7: + CFG_DBITS == 32 ? 8: + CFG_DBITS == 36 ? 9: + 'bx; + + localparam NUMWORDS = CFG_DBITS == 1 ? "8192": + CFG_DBITS == 2 ? "4096": + CFG_DBITS == 4 ? "2048": + CFG_DBITS == 8 ? "1024": + CFG_DBITS == 9 ? "1024": + CFG_DBITS == 16 ? "512": + CFG_DBITS == 18 ? "512": + CFG_DBITS == 32 ? "256": + CFG_DBITS == 36 ? "256": + 'bx; + /* Killing some stupid warnings and assignations*/ + /* generate + if( MODE == 1 ) begin + assign B1DATA_t = ({34{1'b0},B1DATA[0]}); + end + endgenerate*/ + + altsyncram #(.clock_enable_input_b ("ALTERNATE" ), + .clock_enable_input_a ("ALTERNATE" ), + .clock_enable_output_b ("NORMAL" ), + .clock_enable_output_a ("NORMAL" ), + .wrcontrol_aclr_a ("NONE" ), + .indata_aclr_a ("NONE" ), + .address_aclr_a ("NONE" ), + .outdata_aclr_a ("NONE" ), + .outdata_reg_a ("UNREGISTERED"), + .operation_mode ("SINGLE_PORT" ), + .intended_device_family ("CYCLONE IVE" ), + .outdata_reg_a ("UNREGISTERED"), + .lpm_type ("altsyncram" ), + .init_type ("unused" ), + .ram_block_type ("AUTO" ), + .numwords_b ( NUMWORDS ), + .numwords_a ( NUMWORDS ), + .widthad_b ( CFG_ABITS ), + .width_b ( CFG_DBITS ), + .widthad_a ( CFG_ABITS ), + .width_a ( CFG_DBITS ) + ) _TECHMAP_REPLACE_ ( + .data_a(B1DATA), + .address_a(B1ADDR), + .wren_a(B1EN), + .rden_a(A1EN), + .q_a(A1DATA), + .data_b(1'b0), + .address_b(0), + .wren_b(1'b0), + .rden_b(1'b0), + .q_b(1'b0), + .clock0(CLK2), + .clock1(1'b1), // Unused in single port mode + .clocken0(1'b1), + .clocken1(1'b1), + .clocken2(1'b1), + .clocken3(1'b1), + .aclr0(1'b0), + .aclr1(1'b0), + .addressstall_a(1'b0), + .addressstall_b(1'b0)); + +endmodule + diff --git a/techlibs/intel/common/m9k_bb.v b/techlibs/intel/common/m9k_bb.v new file mode 100755 index 000000000..cf178db63 --- /dev/null +++ b/techlibs/intel/common/m9k_bb.v @@ -0,0 +1,66 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +(* blackbox *) +module altsyncram(data_a, address_a, wren_a, rden_a, q_a, data_b, address_b, wren_b, rden_b, + q_b, clock0, clock1, clocken0, clocken1, clocken2, clocken3, aclr0, aclr1, + addressstall_a, addressstall_b); + + parameter clock_enable_input_b = "ALTERNATE"; + parameter clock_enable_input_a = "ALTERNATE"; + parameter clock_enable_output_b = "NORMAL"; + parameter clock_enable_output_a = "NORMAL"; + parameter wrcontrol_aclr_a = "NONE"; + parameter indata_aclr_a = "NONE"; + parameter address_aclr_a = "NONE"; + parameter outdata_aclr_a = "NONE"; + parameter outdata_reg_a = "UNREGISTERED"; + parameter operation_mode = "SINGLE_PORT"; + parameter intended_device_family = "MAX 10 FPGA"; + parameter outdata_reg_a = "UNREGISTERED"; + parameter lpm_type = "altsyncram"; + parameter init_type = "unused"; + parameter ram_block_type = "AUTO"; + parameter numwords_b = 0; + parameter numwords_a = 0; + parameter widthad_b = 1; + parameter width_b = 1; + parameter widthad_a = 1; + parameter width_a = 1; + + // Port A declarations + output [35:0] q_a; + input [35:0] data_a; + input [7:0] address_a; + input wren_a; + input rden_a; + // Port B declarations + output [35:0] q_b; + input [35:0] data_b; + input [7:0] address_b; + input wren_b; + input rden_b; + // Control signals + input clock0, clock1; + input clocken0, clocken1, clocken2, clocken3; + input aclr0, aclr1; + input addressstall_a; + input addressstall_b; + // TODO: Implement the correct simulation model + +endmodule // altsyncram diff --git a/techlibs/intel/cycloneiv/cells_arith.v b/techlibs/intel/cycloneiv/cells_arith.v new file mode 100755 index 000000000..555b91599 --- /dev/null +++ b/techlibs/intel/cycloneiv/cells_arith.v @@ -0,0 +1,97 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +// NOTE: This is still WIP. +(* techmap_celltype = "$alu" *) +/* Uncomment this for LCU???? +module _80_cycloneiv_alu (A, B, CI, BI, X, Y, CO); + parameter A_SIGNED = 0; + parameter B_SIGNED = 0; + parameter A_WIDTH = 1; + parameter B_WIDTH = 1; + parameter Y_WIDTH = 1; + + input [A_WIDTH-1:0] A; + input [B_WIDTH-1:0] B; + output [Y_WIDTH-1:0] X, Y; + + input CI, BI; + //output [Y_WIDTH-1:0] CO; + output CO; + + wire _TECHMAP_FAIL_ = Y_WIDTH <= 2; + + wire [Y_WIDTH-1:0] A_buf, B_buf; + \$pos #(.A_SIGNED(A_SIGNED), .A_WIDTH(A_WIDTH), .Y_WIDTH(Y_WIDTH)) A_conv (.A(A), .Y(A_buf)); + \$pos #(.A_SIGNED(B_SIGNED), .A_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) B_conv (.A(B), .Y(B_buf)); + + wire [Y_WIDTH-1:0] AA = A_buf; + wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf; + //wire [Y_WIDTH:0] C = {CO, CI}; + wire [Y_WIDTH+1:0] COx; + wire [Y_WIDTH+1:0] C = {COx, CI}; + + /* Start implementation */ + //cycloneiv_lcell_comb #(.lut_mask(16'b0000_0000_1010_1010), .sum_lutc_input("cin")) carry_start (.cout(COx[0]), .dataa(C[0]), .datab(1'b1), .datac(1'b1), .datad(1'b1)); + /* + genvar i; + generate for (i = 0; i < Y_WIDTH; i = i + 1) begin: slice + if(i==Y_WIDTH-1) + (* keep *) cycloneiv_lcell_comb #(.lut_mask(16'b1111_0000_1110_0000), .sum_lutc_input("cin")) carry_end (.combout(CO), .dataa(1'b1), .datab(1'b1), .datac(1'b1), .datad(1'b1), .cin(C[Y_WIDTH])); + //assign CO = COx[Y_WIDTH]; + else + cycloneiv_lcell_comb #(.lut_mask(16'b1001_0110_1110_1000), .sum_lutc_input("cin")) arith_cell (.combout(Y[i]), .cout(COx[i+1]), .dataa(AA[i]), .datab(BB[i]), .datac(1'b1), .datad(1'b1), .cin(C[i+1])); + end: slice + endgenerate + /* End implementation */ + /*assign X = AA ^ BB; + +endmodule*/ +module _80_cycloneiv_alu (A, B, CI, BI, X, Y, CO); + parameter A_SIGNED = 0; + parameter B_SIGNED = 0; + parameter A_WIDTH = 1; + parameter B_WIDTH = 1; + parameter Y_WIDTH = 1; + + input [A_WIDTH-1:0] A; + input [B_WIDTH-1:0] B; + output [Y_WIDTH-1:0] X, Y; + + input CI, BI; + output [Y_WIDTH:0] CO; + + wire _TECHMAP_FAIL_ = Y_WIDTH < 6; + + wire [Y_WIDTH-1:0] A_buf, B_buf; + \$pos #(.A_SIGNED(A_SIGNED), .A_WIDTH(A_WIDTH), .Y_WIDTH(Y_WIDTH)) A_conv (.A(A), .Y(A_buf)); + \$pos #(.A_SIGNED(B_SIGNED), .A_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) B_conv (.A(B), .Y(B_buf)); + + wire [Y_WIDTH-1:0] AA = A_buf; + wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf; + wire [Y_WIDTH:0] C = {CO, CI}; + + cycloneiv_lcell_comb #(.lut_mask(16'b0110_0110_1000_1000), .sum_lutc_input("cin")) carry_start (.cout(CO[0]), .dataa(BB[0]), .datab(1'b1), .datac(1'b1), .datad(1'b1)); + genvar i; + generate for (i = 1; i < Y_WIDTH; i = i + 1) begin:slice + cycloneiv_lcell_comb #(.lut_mask(16'b0101_1010_0101_0000), .sum_lutc_input("cin")) arith_cell (.combout(Y[i]), .cout(CO[i]), .dataa(BB[i]), .datab(1'b1), .datac(1'b1), .datad(1'b1), .cin(C[i])); + end endgenerate + + assign X = AA ^ BB; +endmodule diff --git a/techlibs/intel/cycloneiv/cells_map.v b/techlibs/intel/cycloneiv/cells_map.v new file mode 100755 index 000000000..4db91d926 --- /dev/null +++ b/techlibs/intel/cycloneiv/cells_map.v @@ -0,0 +1,83 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +// Normal mode DFF negedge clk, negedge reset +module \$_DFF_N_ (input D, C, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Normal mode DFF +module \$_DFF_P_ (input D, C, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule + +// Async Active Low Reset DFF +module \$_DFF_PN0_ (input D, C, R, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Async Active High Reset DFF +module \$_DFF_PP0_ (input D, C, R, output Q); + parameter WYSIWYG="TRUE"; + wire R_i = ~ R; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R_i), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule + +module \$__DFFE_PP0 (input D, C, E, R, output Q); + parameter WYSIWYG="TRUE"; + wire E_i = ~ E; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(E_i), .sload(1'b0)); +endmodule + +// Input buffer map +module \$__inpad (input I, output O); + cycloneiv_io_ibuf _TECHMAP_REPLACE_ (.o(O), .i(I), .ibar(1'b0)); +endmodule + +// Output buffer map +module \$__outpad (input I, output O); + cycloneiv_io_obuf _TECHMAP_REPLACE_ (.o(O), .i(I), .oe(1'b1)); +endmodule + +// LUT Map +/* 0 -> datac + 1 -> cin */ +module \$lut (A, Y); + parameter WIDTH = 0; + parameter LUT = 0; + input [WIDTH-1:0] A; + output Y; + generate + if (WIDTH == 1) begin + assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function + end else + if (WIDTH == 2) begin + cycloneiv_lcell_comb #(.lut_mask({4{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(1'b1),.datad(1'b1)); + end else + if(WIDTH == 3) begin + cycloneiv_lcell_comb #(.lut_mask({2{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(1'b1)); + end else + if(WIDTH == 4) begin + cycloneiv_lcell_comb #(.lut_mask(LUT), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(A[3])); + end else + wire _TECHMAP_FAIL_ = 1; + endgenerate +endmodule // + + diff --git a/techlibs/intel/cycloneiv/cells_sim.v b/techlibs/intel/cycloneiv/cells_sim.v new file mode 100755 index 000000000..a2891d6e4 --- /dev/null +++ b/techlibs/intel/cycloneiv/cells_sim.v @@ -0,0 +1,299 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +module VCC (output V); + assign V = 1'b1; +endmodule // VCC + +module GND (output G); + assign G = 1'b0; +endmodule // GND + +/* Altera Cyclone IV (GX) devices Input Buffer Primitive */ +module cycloneiv_io_ibuf + (output o, input i, input ibar); + assign ibar = ibar; + assign o = i; +endmodule // fiftyfivenm_io_ibuf + +/* Altera Cyclone IV (GX) devices Output Buffer Primitive */ +module cycloneiv_io_obuf + (output o, input i, input oe); + assign o = i; + assign oe = oe; +endmodule // fiftyfivenm_io_obuf + +/* Altera Cyclone IV (GX) 4-input non-fracturable LUT Primitive */ +module cycloneiv_lcell_comb + (output combout, cout, + input dataa, datab, datac, datad, cin); + + /* Internal parameters which define the behaviour + of the LUT primitive. + lut_mask define the lut function, can be expressed in 16-digit bin or hex. + sum_lutc_input define the type of LUT (combinational | arithmetic). + dont_touch for retiming || carry options. + lpm_type for WYSIWYG */ + + parameter lut_mask = 16'hFFFF; + parameter dont_touch = "off"; + parameter lpm_type = "cycloneiv_lcell_comb"; + parameter sum_lutc_input = "datac"; + + reg [1:0] lut_type; + reg cout_rt; + reg combout_rt; + wire dataa_w; + wire datab_w; + wire datac_w; + wire datad_w; + wire cin_w; + + assign dataa_w = dataa; + assign datab_w = datab; + assign datac_w = datac; + assign datad_w = datad; + + function lut_data; + input [15:0] mask; + input dataa, datab, datac, datad; + reg [7:0] s3; + reg [3:0] s2; + reg [1:0] s1; + begin + s3 = datad ? mask[15:8] : mask[7:0]; + s2 = datac ? s3[7:4] : s3[3:0]; + s1 = datab ? s2[3:2] : s2[1:0]; + lut_data = dataa ? s1[1] : s1[0]; + end + + endfunction + + initial begin + if (sum_lutc_input == "datac") lut_type = 0; + else + if (sum_lutc_input == "cin") lut_type = 1; + else begin + $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input); + $finish(); + end + end + + always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin + if (lut_type == 0) begin // logic function + combout_rt = lut_data(lut_mask, dataa_w, datab_w, + datac_w, datad_w); + end + else if (lut_type == 1) begin // arithmetic function + combout_rt = lut_data(lut_mask, dataa_w, datab_w, + cin_w, datad_w); + end + cout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, 'b0); + end + + assign combout = combout_rt & 1'b1; + assign cout = cout_rt & 1'b1; + +endmodule // cycloneiv_lcell_comb + +/* Altera D Flip-Flop Primitive */ +module dffeas + (output q, + input d, clk, clrn, prn, ena, + input asdata, aload, sclr, sload); + + // Timing simulation is not covered + parameter power_up="dontcare"; + parameter is_wysiwyg="false"; + + reg q_tmp; + wire reset; + reg [7:0] debug_net; + + assign reset = (prn && sclr && ~clrn && ena); + assign q = q_tmp & 1'b1; + + always @(posedge clk, posedge aload) begin + if(reset) q_tmp <= 0; + else q_tmp <= d; + end + assign q = q_tmp; + +endmodule // dffeas + +/* Cyclone IV GX altpll clearbox model */ +(* blackbox *) +module cycloneiv_pll + (inclk, + fbin, + fbout, + clkswitch, + areset, + pfdena, + scanclk, + scandata, + scanclkena, + configupdate, + clk, + phasecounterselect, + phaseupdown, + phasestep, + clkbad, + activeclock, + locked, + scandataout, + scandone, + phasedone, + vcooverrange, + vcounderrange, + fref, + icdrclk); + + parameter operation_mode = "normal"; + parameter pll_type = "auto"; + parameter compensate_clock = "clock0"; + parameter inclk0_input_frequency = 0; + parameter inclk1_input_frequency = 0; + parameter self_reset_on_loss_lock = "off"; + parameter switch_over_type = "auto"; + parameter switch_over_counter = 1; + parameter enable_switch_over_counter = "off"; + parameter bandwidth = 0; + parameter bandwidth_type = "auto"; + parameter use_dc_coupling = "false"; + parameter lock_high = 0; + parameter lock_low = 0; + parameter lock_window_ui = "0.05"; + parameter test_bypass_lock_detect = "off"; + parameter clk0_output_frequency = 0; + parameter clk0_multiply_by = 0; + parameter clk0_divide_by = 0; + parameter clk0_phase_shift = "0"; + parameter clk0_duty_cycle = 50; + parameter clk1_output_frequency = 0; + parameter clk1_multiply_by = 0; + parameter clk1_divide_by = 0; + parameter clk1_phase_shift = "0"; + parameter clk1_duty_cycle = 50; + parameter clk2_output_frequency = 0; + parameter clk2_multiply_by = 0; + parameter clk2_divide_by = 0; + parameter clk2_phase_shift = "0"; + parameter clk2_duty_cycle = 50; + parameter clk3_output_frequency = 0; + parameter clk3_multiply_by = 0; + parameter clk3_divide_by = 0; + parameter clk3_phase_shift = "0"; + parameter clk3_duty_cycle = 50; + parameter clk4_output_frequency = 0; + parameter clk4_multiply_by = 0; + parameter clk4_divide_by = 0; + parameter clk4_phase_shift = "0"; + parameter clk4_duty_cycle = 50; + parameter pfd_min = 0; + parameter pfd_max = 0; + parameter vco_min = 0; + parameter vco_max = 0; + parameter vco_center = 0; + // Advanced user parameters + parameter m_initial = 1; + parameter m = 0; + parameter n = 1; + parameter c0_high = 1; + parameter c0_low = 1; + parameter c0_initial = 1; + parameter c0_mode = "bypass"; + parameter c0_ph = 0; + parameter c1_high = 1; + parameter c1_low = 1; + parameter c1_initial = 1; + parameter c1_mode = "bypass"; + parameter c1_ph = 0; + parameter c2_high = 1; + parameter c2_low = 1; + parameter c2_initial = 1; + parameter c2_mode = "bypass"; + parameter c2_ph = 0; + parameter c3_high = 1; + parameter c3_low = 1; + parameter c3_initial = 1; + parameter c3_mode = "bypass"; + parameter c3_ph = 0; + parameter c4_high = 1; + parameter c4_low = 1; + parameter c4_initial = 1; + parameter c4_mode = "bypass"; + parameter c4_ph = 0; + parameter m_ph = 0; + parameter clk0_counter = "unused"; + parameter clk1_counter = "unused"; + parameter clk2_counter = "unused"; + parameter clk3_counter = "unused"; + parameter clk4_counter = "unused"; + parameter c1_use_casc_in = "off"; + parameter c2_use_casc_in = "off"; + parameter c3_use_casc_in = "off"; + parameter c4_use_casc_in = "off"; + parameter m_test_source = -1; + parameter c0_test_source = -1; + parameter c1_test_source = -1; + parameter c2_test_source = -1; + parameter c3_test_source = -1; + parameter c4_test_source = -1; + parameter vco_multiply_by = 0; + parameter vco_divide_by = 0; + parameter vco_post_scale = 1; + parameter vco_frequency_control = "auto"; + parameter vco_phase_shift_step = 0; + parameter charge_pump_current = 10; + parameter loop_filter_r = "1.0"; + parameter loop_filter_c = 0; + parameter pll_compensation_delay = 0; + parameter lpm_type = "cycloneiv_pll"; + parameter phase_counter_select_width = 3; + + input [1:0] inclk; + input fbin; + input clkswitch; + input areset; + input pfdena; + input [phase_counter_select_width - 1:0] phasecounterselect; + input phaseupdown; + input phasestep; + input scanclk; + input scanclkena; + input scandata; + input configupdate; + + output [4:0] clk; + output [1:0] clkbad; + output activeclock; + output locked; + output scandataout; + output scandone; + output fbout; + output phasedone; + output vcooverrange; + output vcounderrange; + output fref; + output icdrclk; + +endmodule // cycloneive_pll + + diff --git a/techlibs/intel/cycloneive/arith_map.v b/techlibs/intel/cycloneive/arith_map.v new file mode 100755 index 000000000..3eaec3715 --- /dev/null +++ b/techlibs/intel/cycloneive/arith_map.v @@ -0,0 +1,52 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +module _80_cycloneive_alu (A, B, CI, BI, X, Y, CO); + parameter A_SIGNED = 0; + parameter B_SIGNED = 0; + parameter A_WIDTH = 1; + parameter B_WIDTH = 1; + parameter Y_WIDTH = 1; + + input [A_WIDTH-1:0] A; + input [B_WIDTH-1:0] B; + output [Y_WIDTH-1:0] X, Y; + + input CI, BI; + output [Y_WIDTH:0] CO; + + wire _TECHMAP_FAIL_ = Y_WIDTH < 5; + + wire [Y_WIDTH-1:0] A_buf, B_buf; + \$pos #(.A_SIGNED(A_SIGNED), .A_WIDTH(A_WIDTH), .Y_WIDTH(Y_WIDTH)) A_conv (.A(A), .Y(A_buf)); + \$pos #(.A_SIGNED(B_SIGNED), .A_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) B_conv (.A(B), .Y(B_buf)); + + wire [Y_WIDTH-1:0] AA = A_buf; + wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf; + wire [Y_WIDTH:0] C = {CO, CI}; + + cycloneive_lcell_comb #(.lut_mask(16'b0110_0110_1000_1000), .sum_lutc_input("cin")) carry_start (.cout(CO[0]), .dataa(BB[0]), .datab(1'b1), .datac(1'b1), .datad(1'b1)); + genvar i; + generate for (i = 1; i < Y_WIDTH; i = i + 1) begin:slice + cycloneive_lcell_comb #(.lut_mask(16'b0101_1010_0101_0000), .sum_lutc_input("cin")) arith_cell (.combout(Y[i]), .cout(CO[i]), .dataa(BB[i]), .datab(1'b1), .datac(1'b1), .datad(1'b1), .cin(C[i])); + end endgenerate + + assign X = AA ^ BB; + +endmodule diff --git a/techlibs/intel/cycloneive/cells_map.v b/techlibs/intel/cycloneive/cells_map.v new file mode 100755 index 000000000..e7477773a --- /dev/null +++ b/techlibs/intel/cycloneive/cells_map.v @@ -0,0 +1,98 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +// Normal mode DFF negedge clk, negedge reset +module \$_DFF_N_ (input D, C, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Normal mode DFF +module \$_DFF_P_ (input D, C, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Async Active Low Reset DFF +module \$_DFF_PN0_ (input D, C, R, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Async Active High Reset DFF +module \$_DFF_PP0_ (input D, C, R, output Q); + parameter WYSIWYG="TRUE"; + wire R_i = ~ R; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R_i), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule + +module \$__DFFE_PP0 (input D, C, E, R, output Q); + parameter WYSIWYG="TRUE"; + wire E_i = ~ E; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(E_i), .sload(1'b0)); +endmodule + +// Input buffer map +module \$__inpad (input I, output O); + cycloneive_io_ibuf _TECHMAP_REPLACE_ (.o(O), .i(I), .ibar(1'b0)); +endmodule + +// Output buffer map +module \$__outpad (input I, output O); + cycloneive_io_obuf _TECHMAP_REPLACE_ (.o(O), .i(I), .oe(1'b1)); +endmodule + +// LUT Map +/* 0 -> datac + 1 -> cin */ +module \$lut (A, Y); + parameter WIDTH = 0; + parameter LUT = 0; + input [WIDTH-1:0] A; + output Y; + generate + if (WIDTH == 1) begin + assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function + end else + if (WIDTH == 2) begin + cycloneive_lcell_comb #(.lut_mask({4{LUT}}), + .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), + .dataa(A[0]), + .datab(A[1]), + .datac(1'b1), + .datad(1'b1)); + end else + if(WIDTH == 3) begin + cycloneive_lcell_comb #(.lut_mask({2{LUT}}), + .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), + .dataa(A[0]), + .datab(A[1]), + .datac(A[2]), + .datad(1'b1)); + end else + if(WIDTH == 4) begin + cycloneive_lcell_comb #(.lut_mask(LUT), + .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), + .dataa(A[0]), + .datab(A[1]), + .datac(A[2]), + .datad(A[3])); + end else + wire _TECHMAP_FAIL_ = 1; + endgenerate + +endmodule + + diff --git a/techlibs/intel/cycloneive/cells_sim.v b/techlibs/intel/cycloneive/cells_sim.v new file mode 100755 index 000000000..23d06bc1e --- /dev/null +++ b/techlibs/intel/cycloneive/cells_sim.v @@ -0,0 +1,292 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +module VCC (output V); + assign V = 1'b1; +endmodule // VCC + +module GND (output G); + assign G = 1'b0; +endmodule // GND + +/* Altera Cyclone IV (E) devices Input Buffer Primitive */ +module cycloneive_io_ibuf + (output o, input i, input ibar); + assign ibar = ibar; + assign o = i; +endmodule // fiftyfivenm_io_ibuf + +/* Altera Cyclone IV (E) devices Output Buffer Primitive */ +module cycloneive_io_obuf + (output o, input i, input oe); + assign o = i; + assign oe = oe; +endmodule // fiftyfivenm_io_obuf + +/* Altera Cyclone IV (E) 4-input non-fracturable LUT Primitive */ +module cycloneive_lcell_comb + (output combout, cout, + input dataa, datab, datac, datad, cin); + + /* Internal parameters which define the behaviour + of the LUT primitive. + lut_mask define the lut function, can be expressed in 16-digit bin or hex. + sum_lutc_input define the type of LUT (combinational | arithmetic). + dont_touch for retiming || carry options. + lpm_type for WYSIWYG */ + + parameter lut_mask = 16'hFFFF; + parameter dont_touch = "off"; + parameter lpm_type = "cycloneive_lcell_comb"; + parameter sum_lutc_input = "datac"; + + reg [1:0] lut_type; + reg cout_rt; + reg combout_rt; + wire dataa_w; + wire datab_w; + wire datac_w; + wire datad_w; + wire cin_w; + + assign dataa_w = dataa; + assign datab_w = datab; + assign datac_w = datac; + assign datad_w = datad; + + function lut_data; + input [15:0] mask; + input dataa, datab, datac, datad; + reg [7:0] s3; + reg [3:0] s2; + reg [1:0] s1; + begin + s3 = datad ? mask[15:8] : mask[7:0]; + s2 = datac ? s3[7:4] : s3[3:0]; + s1 = datab ? s2[3:2] : s2[1:0]; + lut_data = dataa ? s1[1] : s1[0]; + end + + endfunction + + initial begin + if (sum_lutc_input == "datac") lut_type = 0; + else + if (sum_lutc_input == "cin") lut_type = 1; + else begin + $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input); + $finish(); + end + end + + always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin + if (lut_type == 0) begin // logic function + combout_rt = lut_data(lut_mask, dataa_w, datab_w, + datac_w, datad_w); + end + else if (lut_type == 1) begin // arithmetic function + combout_rt = lut_data(lut_mask, dataa_w, datab_w, + cin_w, datad_w); + end + cout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, 'b0); + end + + assign combout = combout_rt & 1'b1; + assign cout = cout_rt & 1'b1; + +endmodule // cycloneive_lcell_comb + +/* Altera D Flip-Flop Primitive */ +module dffeas + (output q, + input d, clk, clrn, prn, ena, + input asdata, aload, sclr, sload); + + // Timing simulation is not covered + parameter power_up="dontcare"; + parameter is_wysiwyg="false"; + + reg q_tmp; + wire reset; + reg [7:0] debug_net; + + assign reset = (prn && sclr && ~clrn && ena); + assign q = q_tmp & 1'b1; + + always @(posedge clk, posedge aload) begin + if(reset) q_tmp <= 0; + else q_tmp <= d; + end + assign q = q_tmp; + +endmodule // dffeas + +/* Cyclone IV E altpll clearbox model */ +(* blackbox *) +module cycloneive_pll + (inclk, + fbin, + fbout, + clkswitch, + areset, + pfdena, + scanclk, + scandata, + scanclkena, + configupdate, + clk, + phasecounterselect, + phaseupdown, + phasestep, + clkbad, + activeclock, + locked, + scandataout, + scandone, + phasedone, + vcooverrange, + vcounderrange); + + parameter operation_mode = "normal"; + parameter pll_type = "auto"; + parameter compensate_clock = "clock0"; + parameter inclk0_input_frequency = 0; + parameter inclk1_input_frequency = 0; + parameter self_reset_on_loss_lock = "off"; + parameter switch_over_type = "auto"; + parameter switch_over_counter = 1; + parameter enable_switch_over_counter = "off"; + parameter bandwidth = 0; + parameter bandwidth_type = "auto"; + parameter use_dc_coupling = "false"; + parameter lock_high = 0; + parameter lock_low = 0; + parameter lock_window_ui = "0.05"; + parameter test_bypass_lock_detect = "off"; + parameter clk0_output_frequency = 0; + parameter clk0_multiply_by = 0; + parameter clk0_divide_by = 0; + parameter clk0_phase_shift = "0"; + parameter clk0_duty_cycle = 50; + parameter clk1_output_frequency = 0; + parameter clk1_multiply_by = 0; + parameter clk1_divide_by = 0; + parameter clk1_phase_shift = "0"; + parameter clk1_duty_cycle = 50; + parameter clk2_output_frequency = 0; + parameter clk2_multiply_by = 0; + parameter clk2_divide_by = 0; + parameter clk2_phase_shift = "0"; + parameter clk2_duty_cycle = 50; + parameter clk3_output_frequency = 0; + parameter clk3_multiply_by = 0; + parameter clk3_divide_by = 0; + parameter clk3_phase_shift = "0"; + parameter clk3_duty_cycle = 50; + parameter clk4_output_frequency = 0; + parameter clk4_multiply_by = 0; + parameter clk4_divide_by = 0; + parameter clk4_phase_shift = "0"; + parameter clk4_duty_cycle = 50; + parameter pfd_min = 0; + parameter pfd_max = 0; + parameter vco_min = 0; + parameter vco_max = 0; + parameter vco_center = 0; + // Advanced user parameters + parameter m_initial = 1; + parameter m = 0; + parameter n = 1; + parameter c0_high = 1; + parameter c0_low = 1; + parameter c0_initial = 1; + parameter c0_mode = "bypass"; + parameter c0_ph = 0; + parameter c1_high = 1; + parameter c1_low = 1; + parameter c1_initial = 1; + parameter c1_mode = "bypass"; + parameter c1_ph = 0; + parameter c2_high = 1; + parameter c2_low = 1; + parameter c2_initial = 1; + parameter c2_mode = "bypass"; + parameter c2_ph = 0; + parameter c3_high = 1; + parameter c3_low = 1; + parameter c3_initial = 1; + parameter c3_mode = "bypass"; + parameter c3_ph = 0; + parameter c4_high = 1; + parameter c4_low = 1; + parameter c4_initial = 1; + parameter c4_mode = "bypass"; + parameter c4_ph = 0; + parameter m_ph = 0; + parameter clk0_counter = "unused"; + parameter clk1_counter = "unused"; + parameter clk2_counter = "unused"; + parameter clk3_counter = "unused"; + parameter clk4_counter = "unused"; + parameter c1_use_casc_in = "off"; + parameter c2_use_casc_in = "off"; + parameter c3_use_casc_in = "off"; + parameter c4_use_casc_in = "off"; + parameter m_test_source = -1; + parameter c0_test_source = -1; + parameter c1_test_source = -1; + parameter c2_test_source = -1; + parameter c3_test_source = -1; + parameter c4_test_source = -1; + parameter vco_multiply_by = 0; + parameter vco_divide_by = 0; + parameter vco_post_scale = 1; + parameter vco_frequency_control = "auto"; + parameter vco_phase_shift_step = 0; + parameter charge_pump_current = 10; + parameter loop_filter_r = "1.0"; + parameter loop_filter_c = 0; + parameter pll_compensation_delay = 0; + parameter lpm_type = "cycloneive_pll"; + parameter phase_counter_select_width = 3; + + input [1:0] inclk; + input fbin; + input clkswitch; + input areset; + input pfdena; + input [phase_counter_select_width - 1:0] phasecounterselect; + input phaseupdown; + input phasestep; + input scanclk; + input scanclkena; + input scandata; + input configupdate; + + output [4:0] clk; + output [1:0] clkbad; + output activeclock; + output locked; + output scandataout; + output scandone; + output fbout; + output phasedone; + output vcooverrange; + output vcounderrange; + +endmodule // cycloneive_pll diff --git a/techlibs/intel/cyclonev/cells_arith.v b/techlibs/intel/cyclonev/cells_arith.v new file mode 100755 index 000000000..470b686bb --- /dev/null +++ b/techlibs/intel/cyclonev/cells_arith.v @@ -0,0 +1,65 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +// NOTE: This is still WIP. +(* techmap_celltype = "$alu" *) +module _80_altera_a10gx_alu (A, B, CI, BI, X, Y, CO); + parameter A_SIGNED = 0; + parameter B_SIGNED = 0; + parameter A_WIDTH = 1; + parameter B_WIDTH = 1; + parameter Y_WIDTH = 1; + + input [A_WIDTH-1:0] A; + input [B_WIDTH-1:0] B; + output [Y_WIDTH-1:0] X, Y; + + input CI, BI; + //output [Y_WIDTH-1:0] CO; + output CO; + + wire _TECHMAP_FAIL_ = Y_WIDTH <= 4; + + wire [Y_WIDTH-1:0] A_buf, B_buf; + \$pos #(.A_SIGNED(A_SIGNED), .A_WIDTH(A_WIDTH), .Y_WIDTH(Y_WIDTH)) A_conv (.A(A), .Y(A_buf)); + \$pos #(.A_SIGNED(B_SIGNED), .A_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) B_conv (.A(B), .Y(B_buf)); + + wire [Y_WIDTH-1:0] AA = A_buf; + wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf; + //wire [Y_WIDTH:0] C = {CO, CI}; + wire [Y_WIDTH+1:0] COx; + wire [Y_WIDTH+1:0] C = {COx, CI}; + + /* Start implementation */ + (* keep *) fiftyfivenm_lcell_comb #(.lut_mask(16'b0000_0000_1010_1010), .sum_lutc_input("cin")) carry_start (.cout(COx[0]), .dataa(C[0]), .datab(1'b1), .datac(1'b1), .datad(1'b1)); + + genvar i; + generate for (i = 0; i < Y_WIDTH; i = i + 1) begin: slice + if(i==Y_WIDTH-1) begin + (* keep *) fiftyfivenm_lcell_comb #(.lut_mask(16'b1111_0000_1110_0000), .sum_lutc_input("cin")) carry_end (.combout(COx[Y_WIDTH]), .dataa(1'b1), .datab(1'b1), .datac(1'b1), .datad(1'b1), .cin(C[Y_WIDTH])); + assign CO = COx[Y_WIDTH]; + end + else + fiftyfivenm_lcell_comb #(.lut_mask(16'b1001_0110_1110_1000), .sum_lutc_input("cin")) arith_cell (.combout(Y[i]), .cout(COx[i+1]), .dataa(AA[i]), .datab(BB[i]), .datac(1'b1), .datad(1'b1), .cin(C[i+1])); + end: slice + endgenerate + /* End implementation */ + assign X = AA ^ BB; + +endmodule diff --git a/techlibs/intel/cyclonev/cells_map.v b/techlibs/intel/cyclonev/cells_map.v new file mode 100755 index 000000000..b3927ea4a --- /dev/null +++ b/techlibs/intel/cyclonev/cells_map.v @@ -0,0 +1,151 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +// Normal mode DFF negedge clk, negedge reset +module \$_DFF_N_ (input D, C, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Normal mode DFF +module \$_DFF_P_ (input D, C, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule + +// Async Active Low Reset DFF +module \$_DFF_PN0_ (input D, C, R, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Async Active High Reset DFF +module \$_DFF_PP0_ (input D, C, R, output Q); + parameter WYSIWYG="TRUE"; + wire R_i = ~ R; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R_i), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule + +module \$__DFFE_PP0 (input D, C, E, R, output Q); + parameter WYSIWYG="TRUE"; + wire E_i = ~ E; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(E_i), .sload(1'b0)); +endmodule + +// Input buffer map +module \$__inpad (input I, output O); + cyclonev_io_ibuf _TECHMAP_REPLACE_ (.o(O), .i(I), .ibar(1'b0)); +endmodule + +// Output buffer map +module \$__outpad (input I, output O); + cyclonev_io_obuf _TECHMAP_REPLACE_ (.o(O), .i(I), .oe(1'b1)); +endmodule + +// LUT Map +module \$lut (A, Y); + parameter WIDTH = 0; + parameter LUT = 0; + input [WIDTH-1:0] A; + output Y; + generate + if (WIDTH == 1) begin + assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function + end + else + if (WIDTH == 2) begin + cyclonev_lcell_comb #(.lut_mask({16{LUT}}), .shared_arith("off"), .extended_lut("off")) + _TECHMAP_REPLACE_ + (.combout(Y), + .dataa(A[0]), + .datab(A[1]), + .datac(1'b1), + .datad(1'b1), + .datae(1'b1), + .dataf(1'b1), + .datag(1'b1)); + end + else + if(WIDTH == 3) begin + cyclonev_lcell_comb #(.lut_mask({8{LUT}}), .shared_arith("off"), .extended_lut("off")) + _TECHMAP_REPLACE_ + (.combout(Y), + .dataa(A[0]), + .datab(A[1]), + .datac(A[2]), + .datad(1'b1), + .datae(1'b1), + .dataf(1'b1), + .datag(1'b1)); + end + else + if(WIDTH == 4) begin + cyclonev_lcell_comb #(.lut_mask({4{LUT}}), .shared_arith("off"), .extended_lut("off")) + _TECHMAP_REPLACE_ + (.combout(Y), + .dataa(A[0]), + .datab(A[1]), + .datac(A[2]), + .datad(A[3]), + .datae(1'b1), + .dataf(1'b1), + .datag(1'b1)); + end + else + if(WIDTH == 5) begin + cyclonev_lcell_comb #(.lut_mask({2{LUT}}), .shared_arith("off"), .extended_lut("off")) + _TECHMAP_REPLACE_ + (.combout(Y), + .dataa(A[0]), + .datab(A[1]), + .datac(A[2]), + .datad(A[3]), + .datae(A[4]), + .dataf(1'b1), + .datag(1'b1)); + end + else + if(WIDTH == 6) begin + cyclonev_lcell_comb #(.lut_mask(LUT), .shared_arith("off"), .extended_lut("off")) + _TECHMAP_REPLACE_ + (.combout(Y), + .dataa(A[0]), + .datab(A[1]), + .datac(A[2]), + .datad(A[3]), + .datae(A[4]), + .dataf(A[5]), + .datag(1'b1)); + end + else + if(WIDTH == 7) begin + cyclonev_lcell_comb #(.lut_mask(LUT), .shared_arith("off"), .extended_lut("off")) + _TECHMAP_REPLACE_ + (.combout(Y), + .dataa(A[0]), + .datab(A[1]), + .datac(A[2]), + .datad(A[3]), + .datae(A[4]), + .dataf(A[5]), + .datag(A[6])); + end + else + wire _TECHMAP_FAIL_ = 1; + endgenerate +endmodule // lut + + diff --git a/techlibs/intel/cyclonev/cells_sim.v b/techlibs/intel/cyclonev/cells_sim.v new file mode 100755 index 000000000..363310e54 --- /dev/null +++ b/techlibs/intel/cyclonev/cells_sim.v @@ -0,0 +1,144 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +module VCC (output V); + assign V = 1'b1; +endmodule // VCC + +module GND (output G); + assign G = 1'b0; +endmodule // GND + +/* Altera Cyclone V devices Input Buffer Primitive */ +module cyclonev_io_ibuf + (output o, input i, input ibar); + assign ibar = ibar; + assign o = i; +endmodule // cyclonev_io_ibuf + +/* Altera Cyclone V devices Output Buffer Primitive */ +module cyclonev_io_obuf + (output o, input i, input oe); + assign o = i; + assign oe = oe; +endmodule // cyclonev_io_obuf + +/* Altera Cyclone V LUT Primitive */ +module cyclonev_lcell_comb + (output combout, cout, sumout, shareout, + input dataa, datab, datac, datad, + input datae, dataf, datag, cin, + input sharein); + + parameter lut_mask = 64'hFFFFFFFFFFFFFFFF; + parameter dont_touch = "off"; + parameter lpm_type = "cyclonev_lcell_comb"; + parameter shared_arith = "off"; + parameter extended_lut = "off"; + + // Internal variables + // Sub mask for fragmented LUTs + wire [15:0] mask_a, mask_b, mask_c, mask_d; + // Independant output for fragmented LUTs + wire output_0, output_1, output_2, output_3; + // Extended mode uses mux to define the output + wire mux_0, mux_1; + // Input for hold the shared LUT mode value + wire shared_lut_alm; + + // Simulation model of 4-input LUT + function lut4; + input [15:0] mask; + input dataa, datab, datac, datad; + reg [7:0] s3; + reg [3:0] s2; + reg [1:0] s1; + begin + s3 = datad ? mask[15:8] : mask[7:0]; + s2 = datac ? s3[7:4] : s3[3:0]; + s1 = datab ? s2[3:2] : s2[1:0]; + lut4 = dataa ? s1[1] : s1[0]; + end + endfunction // lut4 + + // Simulation model of 5-input LUT + function lut5; + input [31:0] mask; // wp-01003.pdf, page 3: "a 5-LUT can be built with two 4-LUTs and a multiplexer. + input dataa, datab, datac, datad, datae; + reg upper_lut_value; + reg lower_lut_value; + begin + upper_lut_value = lut4(mask[31:16], dataa, datab, datac, datad); + lower_lut_value = lut4(mask[15:0], dataa, datab, datac, datad); + lut5 = (datae) ? upper_mask_value : lower_mask_value; + end + endfunction // lut5 + + // Simulation model of 6-input LUT + function lut6; + input [63:0] mask; + input dataa, datab, datac, datad, datae, dataf; + reg upper_lut_value; + reg lower_lut_value; + begin + upper_lut_value = lut5(mask[63:32], dataa, datab, datac, datad, datae); + lower_lut_value = lut5(mask[31:0], dataa, datab, datac, datad, datae); + lut6 = (dataf) ? upper_mask_value : lower_mask_value; + end + endfunction // lut6 + + assign {mask_a, mask_b, mask_c, mask_d} = {lut_mask[15:0], lut_mask[31:16], lut_mask[47:32], lut_mask[63:48]}; + + always @(*) begin + if(extended_lut == "on") + shared_lut_alm = datag; + else + shared_lut_alm = datac; + // Build the ALM behaviour + out_0 = lut4(mask_a, dataa, datab, datac, datad); + out_1 = lut4(mask_b, dataa, datab, shared_lut_alm, datad); + out_2 = lut4(mask_c, dataa, datab, datac, datad); + out_3 = lut4(mask_d, dataa, datab, shared_lut_alm, datad); + end +endmodule // cyclonev_lcell_comb + + +/* Altera D Flip-Flop Primitive */ +module dffeas + (output q, + input d, clk, clrn, prn, ena, + input asdata, aload, sclr, sload); + + // Timing simulation is not covered + parameter power_up="dontcare"; + parameter is_wysiwyg="false"; + + reg q_tmp; + wire reset; + reg [7:0] debug_net; + + assign reset = (prn && sclr && ~clrn && ena); + assign q = q_tmp & 1'b1; + + always @(posedge clk, posedge aload) begin + if(reset) q_tmp <= 0; + else q_tmp <= d; + end + assign q = q_tmp; + +endmodule // dffeas diff --git a/techlibs/intel/max10/cells_arith.v b/techlibs/intel/max10/cells_arith.v new file mode 100755 index 000000000..9ef073f7c --- /dev/null +++ b/techlibs/intel/max10/cells_arith.v @@ -0,0 +1,65 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +// NOTE: This is still WIP. +(* techmap_celltype = "$alu" *) +module _80_altera_max10_alu (A, B, CI, BI, X, Y, CO); + parameter A_SIGNED = 0; + parameter B_SIGNED = 0; + parameter A_WIDTH = 1; + parameter B_WIDTH = 1; + parameter Y_WIDTH = 1; + + input [A_WIDTH-1:0] A; + input [B_WIDTH-1:0] B; + output [Y_WIDTH-1:0] X, Y; + + input CI, BI; + //output [Y_WIDTH-1:0] CO; + output CO; + + wire _TECHMAP_FAIL_ = Y_WIDTH <= 4; + + wire [Y_WIDTH-1:0] A_buf, B_buf; + \$pos #(.A_SIGNED(A_SIGNED), .A_WIDTH(A_WIDTH), .Y_WIDTH(Y_WIDTH)) A_conv (.A(A), .Y(A_buf)); + \$pos #(.A_SIGNED(B_SIGNED), .A_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) B_conv (.A(B), .Y(B_buf)); + + wire [Y_WIDTH-1:0] AA = A_buf; + wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf; + //wire [Y_WIDTH:0] C = {CO, CI}; + wire [Y_WIDTH+1:0] COx; + wire [Y_WIDTH+1:0] C = {COx, CI}; + + /* Start implementation */ + (* keep *) fiftyfivenm_lcell_comb #(.lut_mask(16'b0000_0000_1010_1010), .sum_lutc_input("cin")) carry_start (.cout(COx[0]), .dataa(C[0]), .datab(1'b1), .datac(1'b1), .datad(1'b1)); + + genvar i; + generate for (i = 0; i < Y_WIDTH; i = i + 1) begin: slice + if(i==Y_WIDTH-1) begin + (* keep *) fiftyfivenm_lcell_comb #(.lut_mask(16'b1111_0000_1110_0000), .sum_lutc_input("cin")) carry_end (.combout(COx[Y_WIDTH]), .dataa(1'b1), .datab(1'b1), .datac(1'b1), .datad(1'b1), .cin(C[Y_WIDTH])); + assign CO = COx[Y_WIDTH]; + end + else + fiftyfivenm_lcell_comb #(.lut_mask(16'b1001_0110_1110_1000), .sum_lutc_input("cin")) arith_cell (.combout(Y[i]), .cout(COx[i+1]), .dataa(AA[i]), .datab(BB[i]), .datac(1'b1), .datad(1'b1), .cin(C[i+1])); + end: slice + endgenerate + /* End implementation */ + assign X = AA ^ BB; + +endmodule diff --git a/techlibs/intel/max10/cells_map.v b/techlibs/intel/max10/cells_map.v new file mode 100755 index 000000000..b74007ff8 --- /dev/null +++ b/techlibs/intel/max10/cells_map.v @@ -0,0 +1,83 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +// Normal mode DFF negedge clk, negedge reset +module \$_DFF_N_ (input D, C, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Normal mode DFF +module \$_DFF_P_ (input D, C, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(1'b1), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule + +// Async Active Low Reset DFF +module \$_DFF_PN0_ (input D, C, R, output Q); + parameter WYSIWYG="TRUE"; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule +// Async Active High Reset DFF +module \$_DFF_PP0_ (input D, C, R, output Q); + parameter WYSIWYG="TRUE"; + wire R_i = ~ R; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R_i), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(1'b0), .sload(1'b0)); +endmodule + +module \$__DFFE_PP0 (input D, C, E, R, output Q); + parameter WYSIWYG="TRUE"; + wire E_i = ~ E; + dffeas #(.is_wysiwyg(WYSIWYG)) _TECHMAP_REPLACE_ (.d(D), .q(Q), .clk(C), .clrn(R), .prn(1'b1), .ena(1'b1), .asdata(1'b0), .aload(1'b0), .sclr(E_i), .sload(1'b0)); +endmodule + +// Input buffer map +module \$__inpad (input I, output O); + fiftyfivenm_io_ibuf _TECHMAP_REPLACE_ (.o(O), .i(I), .ibar(1'b0)); +endmodule + +// Output buffer map +module \$__outpad (input I, output O); + fiftyfivenm_io_obuf _TECHMAP_REPLACE_ (.o(O), .i(I), .oe(1'b1)); +endmodule + +// LUT Map +/* 0 -> datac + 1 -> cin */ +module \$lut (A, Y); + parameter WIDTH = 0; + parameter LUT = 0; + input [WIDTH-1:0] A; + output Y; + generate + if (WIDTH == 1) begin + assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function + end else + if (WIDTH == 2) begin + fiftyfivenm_lcell_comb #(.lut_mask({4{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(1'b1),.datad(1'b1)); + end else + if(WIDTH == 3) begin + fiftyfivenm_lcell_comb #(.lut_mask({2{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(1'b1)); + end else + if(WIDTH == 4) begin + fiftyfivenm_lcell_comb #(.lut_mask(LUT), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(A[3])); + end else + wire _TECHMAP_FAIL_ = 1; + endgenerate +endmodule // + + diff --git a/techlibs/intel/max10/cells_sim.v b/techlibs/intel/max10/cells_sim.v new file mode 100755 index 000000000..29dd8fce4 --- /dev/null +++ b/techlibs/intel/max10/cells_sim.v @@ -0,0 +1,292 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +module VCC (output V); + assign V = 1'b1; +endmodule // VCC + +module GND (output G); + assign G = 1'b0; +endmodule // GND + +/* Altera MAX10 devices Input Buffer Primitive */ +module fiftyfivenm_io_ibuf + (output o, input i, input ibar); + assign ibar = ibar; + assign o = i; +endmodule // fiftyfivenm_io_ibuf + +/* Altera MAX10 devices Output Buffer Primitive */ +module fiftyfivenm_io_obuf + (output o, input i, input oe); + assign o = i; + assign oe = oe; +endmodule // fiftyfivenm_io_obuf + +/* Altera MAX10 4-input non-fracturable LUT Primitive */ +module fiftyfivenm_lcell_comb + (output combout, cout, + input dataa, datab, datac, datad, cin); + + /* Internal parameters which define the behaviour + of the LUT primitive. + lut_mask define the lut function, can be expressed in 16-digit bin or hex. + sum_lutc_input define the type of LUT (combinational | arithmetic). + dont_touch for retiming || carry options. + lpm_type for WYSIWYG */ + + parameter lut_mask = 16'hFFFF; + parameter dont_touch = "off"; + parameter lpm_type = "fiftyfivenm_lcell_comb"; + parameter sum_lutc_input = "datac"; + + reg [1:0] lut_type; + reg cout_rt; + reg combout_rt; + wire dataa_w; + wire datab_w; + wire datac_w; + wire datad_w; + wire cin_w; + + assign dataa_w = dataa; + assign datab_w = datab; + assign datac_w = datac; + assign datad_w = datad; + + function lut_data; + input [15:0] mask; + input dataa, datab, datac, datad; + reg [7:0] s3; + reg [3:0] s2; + reg [1:0] s1; + begin + s3 = datad ? mask[15:8] : mask[7:0]; + s2 = datac ? s3[7:4] : s3[3:0]; + s1 = datab ? s2[3:2] : s2[1:0]; + lut_data = dataa ? s1[1] : s1[0]; + end + + endfunction + + initial begin + if (sum_lutc_input == "datac") lut_type = 0; + else + if (sum_lutc_input == "cin") lut_type = 1; + else begin + $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input); + $finish(); + end + end + + always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin + if (lut_type == 0) begin // logic function + combout_rt = lut_data(lut_mask, dataa_w, datab_w, + datac_w, datad_w); + end + else if (lut_type == 1) begin // arithmetic function + combout_rt = lut_data(lut_mask, dataa_w, datab_w, + cin_w, datad_w); + end + cout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, 'b0); + end + + assign combout = combout_rt & 1'b1; + assign cout = cout_rt & 1'b1; + +endmodule // fiftyfivenm_lcell_comb + +/* Altera D Flip-Flop Primitive */ +module dffeas + (output q, + input d, clk, clrn, prn, ena, + input asdata, aload, sclr, sload); + + // Timing simulation is not covered + parameter power_up="dontcare"; + parameter is_wysiwyg="false"; + + reg q_tmp; + wire reset; + reg [7:0] debug_net; + + assign reset = (prn && sclr && ~clrn && ena); + assign q = q_tmp & 1'b1; + + always @(posedge clk, posedge aload) begin + if(reset) q_tmp <= 0; + else q_tmp <= d; + end + assign q = q_tmp; + +endmodule // dffeas + +/* MAX10 altpll clearbox model */ +(* blackbox *) +module fiftyfivenm_pll + (inclk, + fbin, + fbout, + clkswitch, + areset, + pfdena, + scanclk, + scandata, + scanclkena, + configupdate, + clk, + phasecounterselect, + phaseupdown, + phasestep, + clkbad, + activeclock, + locked, + scandataout, + scandone, + phasedone, + vcooverrange, + vcounderrange); + + parameter operation_mode = "normal"; + parameter pll_type = "auto"; + parameter compensate_clock = "clock0"; + parameter inclk0_input_frequency = 0; + parameter inclk1_input_frequency = 0; + parameter self_reset_on_loss_lock = "off"; + parameter switch_over_type = "auto"; + parameter switch_over_counter = 1; + parameter enable_switch_over_counter = "off"; + parameter bandwidth = 0; + parameter bandwidth_type = "auto"; + parameter use_dc_coupling = "false"; + parameter lock_high = 0; + parameter lock_low = 0; + parameter lock_window_ui = "0.05"; + parameter test_bypass_lock_detect = "off"; + parameter clk0_output_frequency = 0; + parameter clk0_multiply_by = 0; + parameter clk0_divide_by = 0; + parameter clk0_phase_shift = "0"; + parameter clk0_duty_cycle = 50; + parameter clk1_output_frequency = 0; + parameter clk1_multiply_by = 0; + parameter clk1_divide_by = 0; + parameter clk1_phase_shift = "0"; + parameter clk1_duty_cycle = 50; + parameter clk2_output_frequency = 0; + parameter clk2_multiply_by = 0; + parameter clk2_divide_by = 0; + parameter clk2_phase_shift = "0"; + parameter clk2_duty_cycle = 50; + parameter clk3_output_frequency = 0; + parameter clk3_multiply_by = 0; + parameter clk3_divide_by = 0; + parameter clk3_phase_shift = "0"; + parameter clk3_duty_cycle = 50; + parameter clk4_output_frequency = 0; + parameter clk4_multiply_by = 0; + parameter clk4_divide_by = 0; + parameter clk4_phase_shift = "0"; + parameter clk4_duty_cycle = 50; + parameter pfd_min = 0; + parameter pfd_max = 0; + parameter vco_min = 0; + parameter vco_max = 0; + parameter vco_center = 0; + // Advanced user parameters + parameter m_initial = 1; + parameter m = 0; + parameter n = 1; + parameter c0_high = 1; + parameter c0_low = 1; + parameter c0_initial = 1; + parameter c0_mode = "bypass"; + parameter c0_ph = 0; + parameter c1_high = 1; + parameter c1_low = 1; + parameter c1_initial = 1; + parameter c1_mode = "bypass"; + parameter c1_ph = 0; + parameter c2_high = 1; + parameter c2_low = 1; + parameter c2_initial = 1; + parameter c2_mode = "bypass"; + parameter c2_ph = 0; + parameter c3_high = 1; + parameter c3_low = 1; + parameter c3_initial = 1; + parameter c3_mode = "bypass"; + parameter c3_ph = 0; + parameter c4_high = 1; + parameter c4_low = 1; + parameter c4_initial = 1; + parameter c4_mode = "bypass"; + parameter c4_ph = 0; + parameter m_ph = 0; + parameter clk0_counter = "unused"; + parameter clk1_counter = "unused"; + parameter clk2_counter = "unused"; + parameter clk3_counter = "unused"; + parameter clk4_counter = "unused"; + parameter c1_use_casc_in = "off"; + parameter c2_use_casc_in = "off"; + parameter c3_use_casc_in = "off"; + parameter c4_use_casc_in = "off"; + parameter m_test_source = -1; + parameter c0_test_source = -1; + parameter c1_test_source = -1; + parameter c2_test_source = -1; + parameter c3_test_source = -1; + parameter c4_test_source = -1; + parameter vco_multiply_by = 0; + parameter vco_divide_by = 0; + parameter vco_post_scale = 1; + parameter vco_frequency_control = "auto"; + parameter vco_phase_shift_step = 0; + parameter charge_pump_current = 10; + parameter loop_filter_r = "1.0"; + parameter loop_filter_c = 0; + parameter pll_compensation_delay = 0; + parameter lpm_type = "fiftyfivenm_pll"; + parameter phase_counter_select_width = 3; + + input [1:0] inclk; + input fbin; + input clkswitch; + input areset; + input pfdena; + input [phase_counter_select_width - 1:0] phasecounterselect; + input phaseupdown; + input phasestep; + input scanclk; + input scanclkena; + input scandata; + input configupdate; + output [4:0] clk; + output [1:0] clkbad; + output activeclock; + output locked; + output scandataout; + output scandone; + output fbout; + output phasedone; + output vcooverrange; + output vcounderrange; + +endmodule // cycloneive_pll diff --git a/techlibs/intel/synth_intel.cc b/techlibs/intel/synth_intel.cc new file mode 100755 index 000000000..4c4c13016 --- /dev/null +++ b/techlibs/intel/synth_intel.cc @@ -0,0 +1,241 @@ +/* + * yosys -- Yosys Open SYnthesis Suite + * + * Copyright (C) 2012 Clifford Wolf + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "kernel/register.h" +#include "kernel/celltypes.h" +#include "kernel/rtlil.h" +#include "kernel/log.h" + +USING_YOSYS_NAMESPACE +PRIVATE_NAMESPACE_BEGIN + +struct SynthIntelPass : public ScriptPass { + SynthIntelPass() : ScriptPass("synth_intel", "synthesis for Intel (Altera) FPGAs.") { } + + virtual void help() YS_OVERRIDE + { + // |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---| + log("\n"); + log(" synth_intel [options]\n"); + log("\n"); + log("This command runs synthesis for Intel FPGAs.\n"); + log("\n"); + log(" -family < max10 | a10gx | cyclonev | cycloneiv | cycloneive>\n"); + log(" generate the synthesis netlist for the specified family.\n"); + log(" MAX10 is the default target if not family argument specified.\n"); + log(" For Cyclone GX devices, use cycloneiv argument; For Cyclone E, use cycloneive.\n"); + log(" Cyclone V and Arria 10 GX devices are experimental, use it with a10gx argument.\n"); + log("\n"); + log(" -top \n"); + log(" use the specified module as top module (default='top')\n"); + log("\n"); + log(" -vqm \n"); + log(" write the design to the specified Verilog Quartus Mapping File. Writing of an\n"); + log(" output file is omitted if this parameter is not specified.\n"); + log("\n"); + log(" -run :\n"); + log(" only run the commands between the labels (see below). an empty\n"); + log(" from label is synonymous to 'begin', and empty to label is\n"); + log(" synonymous to the end of the command list.\n"); + log("\n"); + log(" -nobram\n"); + log(" do not use altsyncram cells in output netlist\n"); + log("\n"); + log(" -noflatten\n"); + log(" do not flatten design before synthesis\n"); + log("\n"); + log(" -retime\n"); + log(" run 'abc' with -dff option\n"); + log("\n"); + log(" -nobasenradix\n"); + log(" dump the VQM netlist in clearbox format for certain defparam primitives\n"); + log("\n"); + log("The following commands are executed by this synthesis command:\n"); + help_script(); + log("\n"); + } + + string top_opt, family_opt, vout_file; + bool retime, flatten, nobram; + + virtual void clear_flags() YS_OVERRIDE + { + top_opt = "-auto-top"; + family_opt = "max10"; + vout_file = ""; + retime = false; + flatten = true; + nobram = false; + } + + virtual void execute(std::vector args, RTLIL::Design *design) YS_OVERRIDE + { + string run_from, run_to; + clear_flags(); + + size_t argidx; + for (argidx = 1; argidx < args.size(); argidx++) + { + if (args[argidx] == "-family" && argidx+1 < args.size()) { + family_opt = args[++argidx]; + continue; + } + if (args[argidx] == "-top" && argidx+1 < args.size()) { + top_opt = "-top " + args[++argidx]; + continue; + } + if (args[argidx] == "-vqm" && argidx+1 < args.size()) { + vout_file = args[++argidx]; + continue; + } + if (args[argidx] == "-run" && argidx+1 < args.size()) { + size_t pos = args[argidx+1].find(':'); + if (pos == std::string::npos) + break; + run_from = args[++argidx].substr(0, pos); + run_to = args[argidx].substr(pos+1); + continue; + } + if (args[argidx] == "-nobram") { + nobram = true; + continue; + } + if (args[argidx] == "-flatten") { + flatten = true; + continue; + } + if (args[argidx] == "-retime") { + retime = true; + continue; + } + break; + } + extra_args(args, argidx, design); + + if (!design->full_selection()) + log_cmd_error("This command only operates on fully selected designs!\n"); + if (family_opt != "max10" && family_opt !="a10gx" && family_opt != "cyclonev" && family_opt !="cycloneiv" && family_opt !="cycloneive") + log_cmd_error("Invalid or not family specified: '%s'\n", family_opt.c_str()); + + log_header(design, "Executing SYNTH_INTEL pass.\n"); + log_push(); + + run_script(design, run_from, run_to); + + log_pop(); + } + + virtual void script() YS_OVERRIDE + { + if (check_label("begin")) + { + if(check_label("family") && family_opt=="max10") + run("read_verilog -sv -lib +/intel/max10/cells_sim.v"); + else if(check_label("family") && family_opt=="a10gx") + run("read_verilog -sv -lib +/intel/a10gx/cells_sim.v"); + else if(check_label("family") && family_opt=="cyclonev") + run("read_verilog -sv -lib +/intel/cyclonev/cells_sim.v"); + else if(check_label("family") && family_opt=="cycloneiv") + run("read_verilog -sv -lib +/intel/cycloneiv/cells_sim.v"); + else + run("read_verilog -sv -lib +/intel/cycloneive/cells_sim.v"); + // Misc and common cells + run("read_verilog -sv -lib +/intel/common/m9k_bb.v"); + run("read_verilog -sv -lib +/intel/common/altpll_bb.v"); + run(stringf("hierarchy -check %s", help_mode ? "-top " : top_opt.c_str())); + } + + if (flatten && check_label("flatten", "(unless -noflatten)")) + { + run("proc"); + run("flatten"); + run("tribuf -logic"); + run("deminout"); + } + + if (check_label("coarse")) + { + run("synth -run coarse"); + } + + if (!nobram && check_label("bram", "(skip if -nobram)")) + { + run("memory_bram -rules +/intel/common/brams.txt"); + run("techmap -map +/intel/common/brams_map.v"); + } + + if (check_label("fine")) + { + run("opt -fast -mux_undef -undriven -fine -full"); + run("memory_map"); + run("opt -undriven -fine"); + run("dffsr2dff"); + run("dff2dffe -direct-match $_DFF_*"); + run("opt -fine"); + run("techmap -map +/techmap.v"); + run("opt -full"); + run("clean -purge"); + run("setundef -undriven -zero"); + if (retime || help_mode) + run("abc -markgroups -dff", "(only if -retime)"); + } + + if (check_label("map_luts")) + { + if(family_opt=="a10gx" || family_opt=="cyclonev") + run("abc -luts 2:2,3,6:5,10" + string(retime ? " -dff" : "")); + else + run("abc -lut 4" + string(retime ? " -dff" : "")); + run("clean"); + } + + if (check_label("map_cells")) + { + run("iopadmap -bits -outpad $__outpad I:O -inpad $__inpad O:I"); + if(family_opt=="max10") + run("techmap -map +/intel/max10/cells_map.v"); + else if(family_opt=="a10gx") + run("techmap -map +/intel/a10gx/cells_map.v"); + else if(family_opt=="cyclonev") + run("techmap -map +/intel/cyclonev/cells_map.v"); + else if(family_opt=="cycloneiv") + run("techmap -map +/intel/cycloneiv/cells_map.v"); + else + run("techmap -map +/intel/cycloneive/cells_map.v"); + run("dffinit -ff dffeas Q INIT"); + run("clean -purge"); + } + + if (check_label("check")) + { + run("hierarchy -check"); + run("stat"); + run("check -noinit"); + } + + if (check_label("vqm")) + { + if (!vout_file.empty() || help_mode) + run(stringf("write_verilog -attr2comment -defparam -nohex -nobasenradix -renameprefix syn_ %s", + help_mode ? "" : vout_file.c_str())); + } + } +} SynthIntelPass; + +PRIVATE_NAMESPACE_END