From: K. Richard Pixley Date: Thu, 19 Dec 1991 00:57:58 +0000 (+0000) Subject: personal checkpoint X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=ce947b9d8d59e341291ff89b3fd1915d25bb78f5;p=binutils-gdb.git personal checkpoint --- diff --git a/configure.texi b/configure.texi index 6fcef34200d..0189af02435 100644 --- a/configure.texi +++ b/configure.texi @@ -1,25 +1,108 @@ \input texinfo @c -*-para-*- +@c %**start of header @setfilename configure.info @settitle Cygnus Configure +@c %**end of header +@c @setchapternewpage odd -@node top, What Configure Does, (dir), (dir) +@titlepage +@sp 10 +@title{Cygnus Configure} +@author{K. Richard Pixley} +@page +@vskip 0pt plus 1filll +Copyright @copyright{} 1991 Cygnus Support +@end titlepage + +@ifinfo +This document attempts to describe the configuration system used and +distributed by Cygnus Support. + +Copyright @copyright{} 1991 Cygnus Support +@end ifinfo + +@ifinfo +@node top, Invoking, (dir), (dir) +@top top This file documents the configuration system used and distributed by Cygnus Support. +NOTE: support for a Cygnus experimental option, @code{-subdirs} is at +least temporarily suspended. Most of the code is still in configure but +the option is disabled. This document describes that feature, but those +parts are prominently marked with NOTE's like this one. FIXME-soon + @menu -* What Configure Does:: What Configure Does * Invoking:: Invoking -* How It Does It:: How It Does It -* Canonical Triples And Config.Subr:: Canonical Triples And Config.Subr +* Using Configure:: Using Configure +* What Configure Does:: What Configure Does +* Porting:: Porting with Configure +* Known Bugs:: Known Bugs +* Variables Index:: Variable Index +* Concept Index:: Concept Index + + --- The Detailed Node Listing --- + +Using Configure + +* Install Locations:: Where to install things once they are built +* Build Directories:: Where to build object files +* Host:: Telling @code{configure} what will source will + be built +* Target:: Telling @code{configure} what the source will + target +* Local Conventions:: Adding information about local conventions + +Install Locations + +* prefix:: Changing the default install directory +* datadir:: How to separate host independent files + from host dependent files when + installing for multiple hosts +* Install Details:: Full descriptions of all installation + subdirectories + +Porting with Configure + * Native Ports:: Native Ports * Adding Hosts Or Targets:: Adding Hosts Or Targets +* Reference:: Reference + +Native Ports + +* Add A Host:: Add A Host +* Port An Existing Target:: Port An Existing Target +* Add A Target:: Add A Target +* Build Host & Target:: Build Host & Target +* Build New Target On Some Other Host:: Build New Target On Some Other Host + +Adding Hosts Or Targets + +* Add Canonical Triple To Config.Subr (Cf Config.Subr):: Add Canonical Triple To Config.Subr (Cf Config.Subr) +* (Optional) Add Alias (Cf Config.Subr):: +* Monte Carlo - Configure ; Make:: Monte Carlo - Configure ; Make +* Remedies:: Remedies * Adding Configure To Existing Programs:: Adding Configure To Existing Programs + +Remedies + +* Automagic Config:: Automagic Config +* Symlinked Files:: Symlinked Files +* Makefile Fragments (Cf Configure.In):: Makefile Fragments (Cf Configure.In) + +Adding Configure To Existing Programs + * Makefile Support:: Makefile Support -* Known Bugs:: Known Bugs +* Add Standard Macros (Template Follows):: Add Standard Macros (Template Follows) + +Adding Configure To Existing Programs + +* Makefile Host Support - Move It To Host Fragments:: Makefile Host Support - Move It To Host Fragments @end menu +@end ifinfo -@node What Configure Does, Invoking, top, top +@node Invoking, Using Configure, top, top @chapter Invoking The usual way to invoke @code{configure} is as follows: @@ -31,6 +114,7 @@ This asks @code{configure} to prepare the source to be compiled in a @file{/usr/local}. NOTE: support for multiple hosts is at least temporarily suspended. +FIXME-soon If more than one host is specified on the command line, then configurations are created for each and @code{-subdirs} is assumed. @@ -53,15 +137,16 @@ all specified hosts. Displays a quick summary of how to invoke @code{configure}. @item -host=@var{host} -FIXME: I don't think this option should be documented. +FIXME-soon: I don't think this option should be documented. + +NOTE: support for this @code{-namesubdir=} is at least temporary +suspended. FIXME-soon @item -namesubdir=@var{name} Asks that any subdirectories created by the @code{-subdirs} option be named @var{name}. Note that using multiple hosts with @code{-namesubdir=} isn't terribly useful. -NOTE: support for this option is at least temporary suspended. - @item -nfp Notifies @code{configure} that all of the specified hosts have @emph{no floating point} units. @@ -70,14 +155,10 @@ floating point} units. Asks @code{configure} to configure only this directory. Any subdirectories are ignored. This is used by the executable shell script @file{config.status} to reconfigure the current directory. -(@xref{FIXME:config.status}. +(@xref{FIXME-now:config.status}. @item -objdir=@var{dir} -Asks @code{configure} to create the build tree in @var{dir}. The -default is to use the source tree as the build tree. The source -directory is assumed to be @file{.}. - -NOTE: support for this option is at least temporary suspended. +This option is no longer supported. Use @code{-srcdir=} instead. @item -prefix=@var{dir} This option requests that the source be configured so that programs and @@ -98,19 +179,23 @@ create one. @item -site=@var{site} Asks that Makefiles be generated using site specific Makefiles for -@var{site}. (@xref{FIXME: site specific Makefiles}.) +@var{site}. (@xref{FIXME-now: site specific Makefiles}.) @item -srcdir=@var{_dir} Tells @code{configure} that the sources are located in @var{dir}. The build directory is assumed to be @file{.}. +NOTE: support for this @code{-subdirs} is at least temporary suspended. +FIXME-soon + @item -subdirs Asks that configurations be placed in subdirectories named @file{H-@var{host}} of each build directory, for each host specified. If this configuration is not native, (@var{host} is not @var{target}), then he subdir will be named @file{X-@var{host}-@var{target}} instead. -NOTE: support for this option is at least temporary suspended. +NOTE: support for multiple targets is at least temporarily suspended. +FIXME-soon @item -target=@var{target} Requests that the sources be configured to target the @var{target} @@ -118,8 +203,6 @@ machine. If no targets are specified explicitly, the target is assumed to be the same as the host. If multiple targets are specified, configurations for each are created and @code{-subdirs} is assumed. -NOTE: support for multiple targets is at least temporarily suspended. - @item -tmpdir=@var{tmpdir} Sets the directory in which @code{configure} creates temporary files to @var{tmpdir}. @@ -137,7 +220,7 @@ available. @end table -@node Using Configure, Canonical Triples And Config.Subr, Invoking, top +@node Using Configure, What Configure Does, Invoking, top @chapter Using Configure Configure prepares source directories in anticipation of building. @@ -149,12 +232,14 @@ available include: @menu * Install Locations:: Where to install things once they are built * Build Directories:: Where to build object files -* Host:: Host -* Target:: Target -* Local Conventions:: Local Conventions +* Host:: Telling @code{configure} what will source will + be built +* Target:: Telling @code{configure} what the source will + target +* Local Conventions:: Adding information about local conventions @end menu -@node Install Locations, Build Directories, What Configure Does, What Configure Does +@node Install Locations, Build Directories, Using Configure, Using Configure @section Install Locations @cindex Where to install @@ -166,11 +251,11 @@ default value of @code{$(prefix)} is @file{/usr/local}. This is probably correct for native tools installed on only one host. @menu -* prefix:: Changing the default install directory -* datadir:: How to separate host independent files +* prefix:: Changing the default install directory +* datadir:: How to separate host independent files from host dependent files when installing for multiple hosts -* Install Details:: Full descriptions of all installation +* Install Details:: Full descriptions of all installation subdirectories @end menu @@ -178,7 +263,7 @@ probably correct for native tools installed on only one host. @subsection Changing the default install directory @cindex Changing the default install directory -@cindex The prefix directory +@cindex Prefix directory In the default configuration, all files are installed in subdirectories of @file{/usr/local}. The actual location is determined by the value of @@ -242,6 +327,14 @@ independent files will be installed @emph{on top of} the host independent files installed for @var{host1}. This results in a single copy of the host independent files suitable for use by both hosts. +NOTE: support for -subdirsa and multiple hosts is at least temporarily +suspended. FIXME-soon + +Previously this was: + +@example +configure @var{host1} @var{host2} -prefix=/usr/gnu +@end example @node Install Details, , datadir, Install Locations @subsection Full descriptions of all installation subdirectories @@ -254,7 +347,8 @@ standard directories or the Makefile variables, please refer to @cite{standards.text}. Note that @code{configure} does not create @code{srcdir} at any time. -This is not an installation directory. (@xref{}.) +The directory @code{srcdir} is not an installation directory. +(@xref{FIXME-now}.) All makefile variables can be overridden on the command line to @code{make}. (See @xref{Overriding, Overriding Variables, Overriding @@ -263,7 +357,7 @@ value precisely the same way for each invocation of @code{make} or you risk ending up with a broken installation. This is because many programs have the locations of other programs or files compiled into them. If you find yourself overriding any of the variables frequently, -you should consider site depedent Makefile fragments. (See @xref{}.) +you should consider site depedent Makefile fragments. (See @xref{FIXME-now}.) During @code{make install}, the following standard directories will be created and populated: @@ -331,7 +425,7 @@ only indirectly through @code{prefix}. The default value for The makefile variable manext is not supported by the @code{configure}. The @sc{gnu} coding standards do not call for @code{man1ext}, @code{man2ext}, so the intended use for @code{manext} is not clear. -(See also @xref{FIXME:extensions}.) +(See also @xref{FIXME-now:extensions}.) @end defvr @vindex infodir @@ -351,7 +445,7 @@ The default value for @code{docdir} depends on @code{prefix} so @code{docdir} is normally changed only indirectly through @code{prefix}. The default value for @code{docdir} is @code{datadir}@file{/doc}. Note that this variable is an extension to the @sc{gnu} coding standards. -(See also @xref{FIXME:extensions}.) +(See also @xref{FIXME-now:extensions}.) @end defvr @vindex includedir @@ -364,180 +458,246 @@ The default value for @code{includedir} depends on @code{prefix} so @end defvr -@node Build Directories, Host, Install Locations, What Configure Does +@node Build Directories, Host, Install Locations, Using Configure @section Build Directories +@cindex Build directories +@cindex objdir +@cindex Object directories +@cindex subdirs +@cindex Building for multiple hosts +@cindex Building for multiple targets -@node Host, Target, Build Directories, What Configure Does -@section Host - - -@node Target, Local Conventions, Host, What Configure Does -@section Target - - -@node Local Conventions, , Target, What Configure Does -@section Local Conventions - - - -@node How It Does It, How It Does It, What Configure Does, top -@chapter How It Does It - -When configure runs, it does the following things. - -@itemize @bullet - -@item Create Directories -When configure is run with either of the - -@itemize @minus -@item Parallels Source Tree (If -Srcdir) -@item Adds Subdirs (If -Subdir) -@end itemize +Normally, @code{configure} builds @file{Makefile}'s and symbolic links +in the same directory as the source files. This is the typical +@sc{un*x} way to build programs but it has limitations. For instance, +using this approach, you can only build for one host at a time. -@item Generates Makefiles -@item Generates .Gdbinit -@item Makes Symlinks -@item Misc (Usually File Editting) -@item generates config.status -@end itemize +We refer to the directories in which @code{configure} builds +@file{Makefile}'s as the @emph{build directories} or sometimes as +@emph{objdir} because these are the directories in which @code{make} +will build object files, among other things. -@node Canonical Triples And Config.Subr, Native Ports, How It Does It, top -@chapter Canonical Triples And Config.Subr +The default build directory is the same as the source directory. +You can change the build directory with a sequence like the following: -@menu -* Config.Subr Calling Convention:: Config.Subr Calling Convention -* Definition Of Canonical Triples:: Definition Of Canonical Triples -* Maps Aliases To Canonical Triples:: Maps Aliases To Canonical Triples -* Validates Canonical Triples:: Validates Canonical Triples -@end menu +@example +mkdir @var{builddir} +cd @var{builddir} +configure @var{host} -srcdir=@var{sourcedirectory} +@example -@node Config.Subr Calling Convention, Definition Of Canonical Triples, Canonical Triples And Config.Subr, Canonical Triples And Config.Subr -@section Config.Subr Calling Convention +where @var{builddir} is the directory in which you wish to build, +@var{host} is the host for which you want to build, and +@var{sourcedirectory} is the directory containing the source files. +If you were to do this twice with different values for @var{builddir} +and @vr{host}, then you could @code{make} for both at the same time. -@node Definition Of Canonical Triples, Maps Aliases To Canonical Triples, Config.Subr Calling Convention, Canonical Triples And Config.Subr -@section Definition Of Canonical Triples +NOTE: The rest of this section describes the @code{-subdirs} feature for +which support is at least temporarily suspended. FIXME-soon. +Another way to specify the build directory is with the @code{-subdirs} +option. For example: -@node Maps Aliases To Canonical Triples, Validates Canonical Triples, Definition Of Canonical Triples, Canonical Triples And Config.Subr -@section Maps Aliases To Canonical Triples +@example +configure @var{host} -subdirs +@end example +Using this option, @code{configure} will create a subdirectory named +@file{H-@var{host}} to act as the build directory for each source +directory. -@node Validates Canonical Triples, , Maps Aliases To Canonical Triples, Canonical Triples And Config.Subr -@section Validates Canonical Triples +Since building for multiple hosts is so common, @code{configure} +recognizes this situation as special. For example: +@example +configure @var{host1} @var{host2} +@end example +is precisely the same as: -@node Native Ports, Adding Hosts Or Targets, Canonical Triples And Config.Subr, top -@chapter Native Ports +@example +configure @var{host1} -subdirs +configure @var{host2} -subdirs +#end example +That is, when configuring for multiple hosts or multiple targets, +@code{-subdir} is assumed. +When configuring for cross tools, that is, the host is not the target, +as in: -@menu -* Add A Host:: Add A Host -* Port An Existing Target:: Port An Existing Target -* Add A Target:: Add A Target -* Build Host & Target:: Build Host & Target -* Build New Target On Some Other Host:: Build New Target On Some Other Host -@end menu +@example +configure @var{host} +target=@var{targ} -subdirs +@end example -@node Add A Host, Port An Existing Target, Native Ports, Native Ports -@section Add A Host +the subdirectories are named @file{X-@var{host}-@var{targ}}. This is +especially useful when configuring for multiple targets. +If both @code{-subdirs} and @code{-srcdir=} are given, a tree that +parallels the source directory structure is created in the current +directory, except that the current directory represents the source +directory itself, and the subdirectories are created in this directory +tree rather than in the source directories. -@node Port An Existing Target, Add A Target, Add A Host, Native Ports -@section Port An Existing Target +NOTE: previously, -subdirs built two level subdirectories as +./H-host/T-target, created ./H-host/Makefile for building across all +targets, ./Makefile for building across all hosts, and ./config.status +and ./H-host/config.status for rebuilding these Makefiles. +@node Host, Target, Build Directories, Using Configure +@section Host -@node Add A Target, Build Host & Target, Port An Existing Target, Native Ports -@section Add A Target +NOTE: support for multiple hosts is at least temporarily suspended. +FIXME-soon. +The arguments to @code{configure} are @emph{hosts}. By @emph{host} we +mean the environment in which the source will be compiled. This need +not necessarily be the same as the actual physical machine involved, +although it usually is. -@node Build Host & Target, Build New Target On Some Other Host, Add A Target, Native Ports -@section Build Host & Target +For example, if some obscure machine running an operating system other +than @sc{un*x} actually had the @sc{gnu} @sc{posix} emulation libraries +available, it would be possible to configure most @sc{gnu} source for a +@sc{posix} system and build it on the obscure host. +For more on this topic, see @xref{Host Environments, , cfg-paper, On +Configuring Development Tools}. -@node Build New Target On Some Other Host, , Build Host & Target, Native Ports -@section Build New Target On Some Other Host +@node Target, Local Conventions, Host, Using Configure +@section Target +For building native development tools, or most of the other tools in the +@sc{gnu} collection, you need not worry about the target. The +@emph{target} of a configuration defaults to the same as the +@emph{host}. +For building cross development tools, please see @xref{Building +Development Environments, , cfg-paper, On Configuring Development +Tools}. -@node Adding Hosts Or Targets, Adding Configure To Existing Programs, Native Ports, top -@chapter Adding Hosts Or Targets +@node Local Conventions, , Target, Using Configure +@section Local Conventions +If you find that a tool does not get configured to your liking or that +@code{configure}'s conventions are not your local conventions, you +should probably consider site specific Makefile fragments. (see +@xref{FIXME-now: site specific makefile fragments}) +These are probably not the right choice for options that can be set from +the @code{configure} command line or for differences that are host or +target dependent. -@menu -* Add Canonical Triple To Config.Subr (Cf Config.Subr):: Add Canonical Triple To Config.Subr (Cf Config.Subr) -* (Optional) Add Alias (Cf Config.Subr):: -* Monte Carlo - Configure ; Make:: Monte Carlo - Configure ; Make -* Remedies:: Remedies -@end menu -@node Add Canonical Triple To Config.Subr (Cf Config.Subr), (Optional) Add Alias (Cf Config.Subr), Adding Hosts Or Targets, Adding Hosts Or Targets -@section Add Canonical Triple To Config.Subr (Cf Config.Subr) +@node What Configure Does, Porting, Using Configure, top +@chapter What Configure Does +When configure runs, it does the following things for each source +directory for each host and target combination. -@node (Optional) Add Alias (Cf Config.Subr), Monte Carlo - Configure ; Make, Add Canonical Triple To Config.Subr (Cf Config.Subr), Adding Hosts Or Targets -@section (Optional) Add Alias (Cf Config.Subr) +NOTE: support for multiple hosts and targets is at least temporarily +suspended. +@itemize @bullet -@node Monte Carlo - Configure ; Make, Remedies, (Optional) Add Alias (Cf Config.Subr), Adding Hosts Or Targets -@section Monte Carlo - Configure ; Make +@item Create Build Directories +(see @xref{Build Directories}) When @code{configure} is run with the +@code{-srcdir=} option, a directory tree is created that parallels the +directory structure of the source directory except that the current +directory is treated as the build directory for the source directory +proper. (see @xref{Invoking}). + +NOTE: support for @code{-subdirs} is at least temporarily suspended. + +When @code{configure} is run with the @code{-subdirs} option, a build +directory is created in each source directory. + +If both @code{-subdirs} and @code{-srcdir=} are given, a tree that +parallels the source directory structure is created in the current +directory, except that the current directory represents the source +directory itself, and the subdirectories are created in this directory +tree rather than in the source directories. + +@item Generate Makefiles +A makefile template, usually called @file{Makefile.in} from the source +directory is copied to an output file in the build directory. The +output file is usually named @file{Makefile}. A number of makefile +macros are prepended to the output file. If @code{-prefix=} or +@code{-datadir=} were specified on the @code{configure} command line, +then the makefile variables are set accordingly. If host, target, or +site, specific makefile fragments exist, they are inserted into the +output file. (see @xref{Makefiles, , , make, Makefiles}) + +@item Generate .gdbinit +If the source directory contains a .gdbinit file and the build directory +is different from the source directory, a .gdbinit file is created in +the build directory. (see @xref{Command Files, , , gdb, Command Files}) + +@item Make Symbolic Links +Most directories have some symbolic links with generic names built +pointing to specific files in the source directory. If the system on +which @code{configure} is run cannot support symbolic links, then hard +links are used instead. + +@item Miscellaneous +If the source directory has special needs, they are handled. Usually +there are none, but sometimes they involve changes to the output +makefile. + +@item Generate config.status +A shell script named @file{config.status} is created in the build +directory. This shell script, when run from the build directory, will +reconfigure the build directory except that subdirectories are not +reconfigured. This is most often used by @code{make} to rebuild the +output makefile. (see @xref{Top, , , bash}) + +@item Recursion +If the source directory has subdirectories that should also be +configured, then @code{configure} is called for each. +@end itemize -@node Remedies, , Monte Carlo - Configure ; Make, Adding Hosts Or Targets -@section Remedies +@node Porting, Known Bugs, What Configure Does, top +@chapter Porting with Configure +This section explains briefly how to port configure for: @menu -* Automagic Config:: Automagic Config -* Symlinked Files:: Symlinked Files -* Makefile Fragments (Cf Configure.In):: Makefile Fragments (Cf Configure.In) +* Programs:: Adding configure to existing programs +* Hosts:: Adding new hosts to existing programs +* Targets:: Adding new targets to existing programs +* Reference:: Reference @end menu -@node Automagic Config, Symlinked Files, Remedies, Remedies -@subsection Automagic Config - - -@node Symlinked Files, Makefile Fragments (Cf Configure.In), Automagic Config, Remedies -@subsection Symlinked Files - - -@node Makefile Fragments (Cf Configure.In), , Symlinked Files, Remedies -@subsection Makefile Fragments (Cf Configure.In) - -@node Adding Configure To Existing Programs, Known Bugs, Adding Hosts Or Targets, top -@chapter Adding Configure To Existing Programs - +@node Programs, , Remedies, Adding Hosts Or Targets +@subsection Adding Configure To Existing Programs If you are writing a new program, don't worry about porting issues or configure until it is running reasonably on some host. Then refer back to this section. +If your + +@c marker + @menu * Makefile Support:: Makefile Support -* Automagic Configuration:: Automagic Configuration +* Add Standard Macros (Template Follows):: Add Standard Macros (Template Follows) @end menu -@node Makefile Support, Automagic Configuration, Adding Configure To Existing Programs, Adding Configure To Existing Programs -@section Makefile Support +@node Makefile Support, Add Standard Macros (Template Follows), Adding Configure To Existing Programs, Adding Configure To Existing Programs +@subsubsection Makefile Support @menu * Makefile Host Support - Move It To Host Fragments:: Makefile Host Support - Move It To Host Fragments -* Add Standard Macros (Template Follows):: Add Standard Macros (Template Follows) @end menu -@node Makefile Host Support - Move It To Host Fragments, Add Standard Macros (Template Follows), Makefile Support, Makefile Support -@subsection Makefile Host Support - Move It To Host Fragments - -@node Add Standard Macros (Template Follows), , Makefile Host Support - Move It To Host Fragments, Makefile Support -@subsection Add Standard Macros (Template Follows) +@node Add Standard Macros (Template Follows), , Makefile Support, Adding Configure To Existing Programs +@subsubsection Add Standard Macros (Template Follows) @itemize @bullet @item as defined in standards.text @@ -846,20 +1006,76 @@ links pointing to the second word of files, and so on. @end itemize @end itemize -@node Automagic Configuration, , Makefile Support, Adding Configure To Existing Programs -@section Automagic Configuration +@node Native Ports, Adding Hosts Or Targets, Porting, Porting +@section Native Ports + +To port a GNU tool that uses the Cygnus Configure system, do the +following. + +@itemize @asis + +@item Add A Host +@item Port An Existing Target +@item Add A Target +@item Build Host & Target +@item Build New Target On Some Other Host + +@end table + +@node Adding Hosts Or Targets, Reference, Native Ports, Porting +@section Adding Hosts Or Targets + @menu -* Should Be Used If Prep'D Files Don'T Exist:: Should Be Used If Prep'D Files Don'T Exist +* Add Canonical Triple To Config.Subr (Cf Config.Subr):: Add Canonical Triple To Config.Subr (Cf Config.Subr) +* (Optional) Add Alias (Cf Config.Subr):: +* Monte Carlo - Configure ; Make:: Monte Carlo - Configure ; Make +* Remedies:: Remedies +* Adding Configure To Existing Programs:: Adding Configure To Existing Programs @end menu -@node Should Be Used If Prep'D Files Don'T Exist, , Automagic Configuration, Automagic Configuration -@subsection Should Be Used If Prep'D Files Don'T Exist +@node Add Canonical Triple To Config.Subr (Cf Config.Subr), (Optional) Add Alias (Cf Config.Subr), Adding Hosts Or Targets, Adding Hosts Or Targets +@subsection Add Canonical Triple To Config.Subr (Cf Config.Subr) + + +@node (Optional) Add Alias (Cf Config.Subr), Monte Carlo - Configure ; Make, Add Canonical Triple To Config.Subr (Cf Config.Subr), Adding Hosts Or Targets +@subsection (Optional) Add Alias (Cf Config.Subr) + + +@node Monte Carlo - Configure ; Make, Remedies, (Optional) Add Alias (Cf Config.Subr), Adding Hosts Or Targets +@subsection Monte Carlo - Configure ; Make + +@node Remedies, Adding Configure To Existing Programs, Monte Carlo - Configure ; Make, Adding Hosts Or Targets +@subsection Remedies -@node Known Bugs, Variables Index, Adding Configure To Existing Programs, top +@menu +* Automagic Config:: Automagic Config +* Symlinked Files:: Symlinked Files +* Makefile Fragments (Cf Configure.In):: Makefile Fragments (Cf Configure.In) +@end menu + +@node Automagic Config, Symlinked Files, Remedies, Remedies +@subsubsection Automagic Config + + +@node Symlinked Files, Makefile Fragments (Cf Configure.In), Automagic Config, Remedies +@subsubsection Symlinked Files + + +@node Makefile Fragments (Cf Configure.In), , Symlinked Files, Remedies +@subsubsection Makefile Fragments (Cf Configure.In) + +@node Reference, , Adding Hosts Or Targets, Porting +@section Reference + + + +Automagic Configuration Should Be Used If Prep'D Files Don'T Exist. + +@node Known Bugs, Variables Index, Porting, top @chapter Known Bugs The following bugs are known to exist. @@ -877,16 +1093,14 @@ not available. @end itemize @node Variables Index, Concept Index, Known Bugs, top -@unnumbered Variable Index +@appendix Variable Index @printindex vr @node Concept Index, , Variables Index, top -@unnumbered Concept Index +@appendix Concept Index @printindex cp - -@summarycontents @contents @bye