From: Luke Kenneth Casson Leighton Date: Sun, 5 Aug 2018 12:01:05 +0000 (+0100) Subject: update m_class to emmc naming X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=ced272e94680ee5a055b0e67107a6284d16f1333;p=pinmux.git update m_class to emmc naming --- diff --git a/src/spec/ifaceprint.py b/src/spec/ifaceprint.py index 51088f5..55b820d 100644 --- a/src/spec/ifaceprint.py +++ b/src/spec/ifaceprint.py @@ -80,6 +80,8 @@ def display_fns(of, bankspec, pins, function_names): current_fn = None for fname in fnidx: fnbase = find_fn(fname, fn_names) + assert fnbase in function_names, "fn %s not in descriptions %s" % \ + (fname, str(function_names.keys())) #print "name", fname, fnbase if fnbase != current_fn: if current_fn is not None: diff --git a/src/spec/m_class.py b/src/spec/m_class.py index da15522..e9c3a64 100644 --- a/src/spec/m_class.py +++ b/src/spec/m_class.py @@ -4,13 +4,13 @@ from spec.base import PinSpec def pinspec(): - pinbanks = {'A': 16, - 'B': 28, - 'C': 24, - 'D': 24, - 'E': 24, - 'F': 10, - 'G': 32, + pinbanks = {'A': (16, 4), + 'B': (28, 4), + 'C': (24, 4), + 'D': (24, 4), + 'E': (24, 4), + 'F': (10, 4), + 'G': (32, 4), } fixedpins = { 'DDR3': [ @@ -82,11 +82,11 @@ def pinspec(): 'JTAG1': 'JTAG (same as JTAG0, JTAG_SEL=HIGH)', 'LCD': '24-pin RGB/TTL LCD', 'RG': 'RGMII Ethernet', - 'MMC': 'eMMC 1/2/4/8 pin', + 'EMMC': 'eMMC 1/2/4/8 pin', 'PWM': 'PWM (pulse-width modulation)', - 'SD0': 'SD/MMC 0', - 'SD1': 'SD/MMC 1', - 'SD2': 'SD/MMC 2', + 'MMC0': 'SD/MMC 0', + 'MMC1': 'SD/MMC 1', + 'MMC2': 'SD/MMC 2', 'SPI0': 'SPI (Serial Peripheral Interface) 0', 'SPI1': 'SPI (Serial Peripheral Interface) 1', 'QSPI': 'Quad SPI (Serial Peripheral Interface) 1', @@ -171,7 +171,7 @@ def pinspec(): ps.i2c("2", ('D', 19), 2) ps.uartfull("0", ('D', 0), 2) ps.uart("1", ('D', 21), 2) - ps.uart("2", ('D', 13), 2) + #ps.uart("2", ('D', 13), 2) ps.eint("", ('D', 19), 3, start=18, limit=4) ps.eint("", ('D', 23), 3, start=9, limit=1) ps.eint("", ('D', 13), 3, start=5, limit=4) @@ -219,17 +219,17 @@ def pinspec(): # VBUS_EN, OTG_ID etc. are all not included below, there is plenty # of spare GPIO. - eoma68 = ['B1:LCD/22', 'ULPI0/8', 'ULPI1', 'MMC', 'SD0', 'UART1', - 'TWI2', 'SPI1', 'E2:SD1', ] + eoma68 = ['B1:LCD/22', 'ULPI0/8', 'ULPI1', 'EMMC', 'MMC0', 'UART1', + 'TWI2', 'SPI1', 'E2:MMC1', ] eoma68_eint = ['EINT_16', 'EINT_17', 'EINT_18', 'EINT_19'] eoma68_pwm = ['D1:PWM_2'] descriptions = { - 'MMC': 'internal (on Card)', - 'SD0': 'user-facing: internal (on Card), multiplexed with JTAG0\n' + 'EMMC': 'internal (on Card)', + 'MMC0': 'user-facing: internal (on Card), multiplexed with JTAG0\n' 'and UART0, for debug purposes', 'TWI2': 'EOMA68-compliance: must be entirely free of devices.\n' 'Address 0x51 used (externally) for EOMA68 EEPROM Id', - 'E2:SD1': 'EOMA68-compliance', + 'E2:MMC1': 'EOMA68-compliance', 'SPI1': 'EOMA68-compliance', 'UART1': 'EOMA68-compliance', 'B1:LCD/22': 'EOMA68-compliance, 18-bit RGB/TTL LCD', @@ -245,13 +245,13 @@ def pinspec(): # Focus is on getting as many UARTs, SPIs and TWIs as possible. # OTG_ID (if to be used) would require dropping some functions in order # to free up GPIO. LCD could be reduced to 15-bit (freeing 3). - # MMC could be reduced to 4-bit-wide, used as SD/MMC (freeing 4). + # EMMC could be reduced to 4-bit-wide, used as SD/MMC (freeing 4). # QSPI could be used in 1-bit (MOSI/MISO) mode (freeing up 2 more). industrial = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI0/8', 'ULPI1/8', - 'MMC', 'B2:SD0', + 'EMMC', 'B2:MMC0', 'JTAG0', 'A3:UART0', 'E2:QUART1', 'C3:QUART0', - 'F2:TWI0', 'D2:TWI1', 'D2:TWI2', 'SPI1', 'QSPI', 'F2:SD2'] + 'F2:TWI0', 'D2:TWI1', 'D2:TWI2', 'SPI1', 'QSPI', 'F2:MMC2'] industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2'] industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27', 'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23'] @@ -268,10 +268,10 @@ def pinspec(): # also possibility of freeing up FlexBus CS# with a little reorg. industrial = ['D1:FB/17', 'E1:FB/8', 'B2:SPI0', 'ULPI0/8', 'ULPI1/8', - 'MMC', 'B2:SD0', + 'EMMC', 'B2:MMC0', 'JTAG0', 'A3:UART0', 'E2:QUART1', 'C3:QUART0', 'B2:UART2', 'B2:UART1', - 'F2:TWI0', 'D2:TWI1', 'D2:TWI2', 'SPI1', 'QSPI', 'F2:SD2'] + 'F2:TWI0', 'D2:TWI1', 'D2:TWI2', 'SPI1', 'QSPI', 'F2:MMC2'] industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2'] industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27', 'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23'] @@ -287,11 +287,11 @@ def pinspec(): # Smartphone / Tablet - basically the same thing tablet = ['B1:LCD/22', 'ULPI0/8', 'ULPI1/8', - 'MMC', 'SD0', + 'EMMC', 'MMC0', 'F1:IIS', # I2C Audio 'TWI1', # I2C Audio 'E2:QUART1', # WIFI/BT - 'E2:SD1', # WIFI + 'E2:MMC1', # WIFI 'C3:QUART0', # GPS 'D2:UART1', 'D2:UART2', @@ -314,18 +314,18 @@ def pinspec(): descriptions = { 'B1:LCD/22': 'RGB/TTL LCD, 800x480 or use SN75LVDS83b for up to 1440x900', - 'MMC': 'eMMC: main internal storage', + 'EMMC': 'eMMC: main internal storage', 'ULPI0/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n' 'as well as USB Host or USB Device', 'ULPI1/8': 'USB2 Host, connect to ULPI PHY w/and 4-port USB2 Hub\n' 'for example GL850G or FE1.1. ' 'Connects to 2/3/4G/LTE Modem, 2x USB-Camera (VC0345)', - 'SD0': 'internal, multiplexed with JTAG0\n' + 'MMC0': 'internal, multiplexed with JTAG0\n' 'and UART0, for debug purposes', 'F1:IIS': 'I2C Audio, connect to AC97 Audio IC', 'TWI1': 'Connect to AC97 Audio IC', 'E2:QUART1': 'Connect to BT on AP6234/AP6335', - 'E2:SD1': 'Connect to WIFI on AP6234/AP6335', + 'E2:MMC1': 'Connect to WIFI on AP6234/AP6335', 'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n' 'Only actually needs MISO/MOSI, bootstrap loader v. small\n' 'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.', @@ -368,11 +368,11 @@ def pinspec(): # Laptop laptop = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI0/8', 'ULPI1/8', - 'MMC', 'SD0', + 'EMMC', 'MMC0', 'F1:IIS', # I2C Audio 'TWI1', # I2C Audio 'E2:QUART1', # WIFI/BT - 'E2:SD2', # WIFI + 'E2:MMC2', # WIFI 'D2:TWI2', 'QSPI'] laptop_pwm = ['F2:PWM_0', # LCD_BACKLIGHT ] @@ -386,22 +386,22 @@ def pinspec(): '10/100 Ethernet PHY.', 'E1:FB/8': 'FlexBus bus bits 8-15, needed to make a 16-bit bus width', 'B1:LCD/22': 'RGB/TTL LCD, use SN75LVDS83b for ' - 'LVDS or SSD2828 for MIPI,\n' + 'LVDS or SMMC2828 for MIPI,\n' 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n' 'display output (eDP/LVDS and HDMI/VGA) ' 'conversion.', - 'MMC': 'eMMC: main internal storage', + 'EMMC': 'eMMC: main internal storage', 'ULPI0/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n' 'as well as USB Host or USB Device', 'ULPI1/8': 'USB2 Host, connect to ULPI PHY w/and 4-port USB2 Hub\n' 'for example GL850G or FE1.1. ' 'Connects to USB-Camera (VC0345 and 3x external USB Ports)', - 'SD0': 'internal, multiplexed with JTAG0\n' + 'MMC0': 'internal, multiplexed with JTAG0\n' 'and UART0, for debug purposes', 'F1:IIS': 'I2C Audio, connect to AC97 Audio IC', 'TWI1': 'Connect to AC97 Audio IC', 'E2:QUART1': 'Connect to BT on AP6234/AP6335', - 'E2:SD2': 'Connect to WIFI on AP6234/AP6335', + 'E2:MMC2': 'Connect to WIFI on AP6234/AP6335', 'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n' 'Only actually needs MISO/MOSI, bootstrap loader v. small\n' 'Bootstrap loader checks eMMC, USB-OTG, SD/MMC, SPI, etc.\n' @@ -423,13 +423,13 @@ def pinspec(): # IoT iot = ['B1:LCD', 'ULPI1/8', 'ULPI0/8', - 'MMC', 'SD0', + 'EMMC', 'MMC0', 'F1:IIS', # I2C Audio #'TWI1', # I2C Audio 'C3:QUART0', # HSPA UART 'E2:QUART1', # BT UART 'C2:SPI1', # HSPI SPI - 'E2:SD2', # WIFI + 'E2:MMC2', # WIFI 'D3:TWI0', # sensors CTP, 'D2:TWI2', 'QSPI'] iot_pwm = ['F2:PWM_0', # LCD_BACKLIGHT @@ -452,20 +452,20 @@ def pinspec(): ] descriptions = { 'B1:LCD': - 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SSD2828 for MIPI,\n' + 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SMMC2828 for MIPI,\n' 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n' 'display output (eDP/LVDS and HDMI/VGA) ' 'conversion.', - 'MMC': 'eMMC: main internal storage', + 'EMMC': 'eMMC: main internal storage', 'F1:IIS': 'I2C Audio, connect to AC97 Audio IC', 'ULPI1/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n' 'as well as USB Host or USB Device', 'ULPI0/8': 'USB2 Host, connect to ULPI PHY', - 'SD0': 'internal, multiplexed with JTAG0\n' + 'MMC0': 'internal, multiplexed with JTAG0\n' 'and UART0, for debug purposes', 'C3:QUART0': 'Connect to HSPA UART', 'E2:QUART1': 'Connect to BT UART', - 'E2:SD2': 'Connect to WIFI', + 'E2:MMC2': 'Connect to WIFI', 'C2:SPI1': 'HSPA SPI', 'QSPI': 'Boot Storage (connection to companion / debug / boot MCU)\n' 'Only actually needs MISO/MOSI, bootstrap loader v. small\n'