From: Rob Savoye Date: Fri, 30 Dec 1994 01:26:37 +0000 (+0000) Subject: * monitor.[ch], op50-rom.c, rom68k-rom.c, w89k-rom.c: Add support X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=cf51c6017e2e5203d69b10c51f53d616a1ad61e4;p=binutils-gdb.git * monitor.[ch], op50-rom.c, rom68k-rom.c, w89k-rom.c: Add support to monitor config structure for supported baud rates for a target and variable stop bits. * monitor.c (monitor_fetch_register): Store register values in big endian format on any host. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index caacd857fe8..056eb79dfb8 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,11 @@ +Thu Dec 29 18:18:31 1994 Rob Savoye + + * monitor.[ch], op50-rom.c, rom68k-rom.c, w89k-rom.c: Add support + to monitor config structure for supported baud rates for a target + and variable stop bits. + * monitor.c (monitor_fetch_register): Store register values in big + endian format on any host. + Wed Dec 28 19:27:22 1994 Jeff Law (law@snake.cs.utah.edu) * hppa-tdep.c (hppa_fix_call_dummy): Prefer import stubs over diff --git a/gdb/monitor.c b/gdb/monitor.c index 6e02e13b39e..130bd28377b 100644 --- a/gdb/monitor.c +++ b/gdb/monitor.c @@ -42,11 +42,41 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "monitor.h" #include "remote-utils.h" -#ifdef HAVE_TERMIO +#if !defined (HAVE_TERMIOS) && !defined (HAVE_TERMIO) && !defined (HAVE_SGTTY) +#define HAVE_SGTTY +#endif + +#ifdef HAVE_TERMIOS +#include +#include # define TERMINAL struct termios #else +#include # define TERMINAL struct sgttyb #endif +#include "terminal.h" +#ifndef CSTOPB +#define CSTOPB 0x00000040 +#endif + +#define SWAP_TARGET_AND_HOST(buffer,len) \ + do \ + { \ + if (TARGET_BYTE_ORDER != HOST_BYTE_ORDER) \ + { \ + char tmp; \ + char *p = (char *)(buffer); \ + char *q = ((char *)(buffer)) + len - 1; \ + for (; p < q; p++, q--) \ + { \ + tmp = *q; \ + *q = *p; \ + *p = tmp; \ + } \ + } \ + } \ + while (0) + extern void make_xmodem_packet(); extern void print_xmodem_packet(); @@ -72,7 +102,7 @@ static int timeout = 24; * Descriptor for I/O to remote machine. Initialize it to NULL so that * monitor_open knows that we don't have a file open when the program starts. */ -static serial_t monitor_desc = NULL; +serial_t monitor_desc = NULL; /* sets the download protocol, choices are srec, generic, boot */ char *loadtype; @@ -215,7 +245,7 @@ write_monitor(data, len) * the sr_get_debug() value, the second arg is a printf buffer and args * to be formatted and printed. A CR is added after each string is printed. */ -static void +void debuglogs(va_alist) va_dcl { @@ -414,8 +444,18 @@ get_hex_digit(ignore) ch = readchar(timeout); if (junk(ch)) continue; - if (sr_get_debug() > 4) + if (sr_get_debug() > 4) { debuglogs (4, "get_hex_digit() got a 0x%x(%c)", ch, ch); + } else { +#ifdef LOG_FILE /* write to the monitor log */ + if (log_file != 0x0) { + fputs ("get_hex_digit() got a 0x", log_file); + fputc (ch, log_file); + fputc ('\n', log_file); + fflush (log_file); + } +#endif + } if (ch >= '0' && ch <= '9') return ch - '0'; @@ -427,6 +467,7 @@ get_hex_digit(ignore) ; else { expect_prompt(1); + debuglogs (4, "Invalid hex digit from remote system. (0x%x)", ch); error("Invalid hex digit from remote system. (0x%x)", ch); } } @@ -442,13 +483,13 @@ get_hex_byte (byt) int val; val = get_hex_digit (1) << 4; - debuglogs (4, "get_hex_digit() -- Read first nibble 0x%x", val); + debuglogs (4, "get_hex_byte() -- Read first nibble 0x%x", val); val |= get_hex_digit (0); - debuglogs (4, "get_hex_digit() -- Read second nibble 0x%x", val); + debuglogs (4, "get_hex_byte() -- Read second nibble 0x%x", val); *byt = val; - debuglogs (4, "get_hex_digit() -- Read a 0x%x", val); + debuglogs (4, "get_hex_byte() -- Read a 0x%x", val); } /* @@ -458,14 +499,24 @@ get_hex_byte (byt) static int get_hex_word () { - long val; + long val, newval; int i; val = 0; - for (i = 0; i < 8; i++) - val = (val << 4) + get_hex_digit (i == 0); - - debuglogs (4, "get_hex_word() got a 0x%x.", val); + +#if 0 + if (HOST_BYTE_ORDER == BIG_ENDIAN) { +#endif + for (i = 0; i < 8; i++) + val = (val << 4) + get_hex_digit (i == 0); +#if 0 + } else { + for (i = 7; i >= 0; i--) + val = (val << 4) + get_hex_digit (i == 0); + } +#endif + + debuglogs (4, "get_hex_word() got a 0x%x for a %s host.", val, (HOST_BYTE_ORDER == BIG_ENDIAN) ? "big endian" : "little endian"); return val; } @@ -488,7 +539,7 @@ monitor_create_inferior (execfile, args, env) entry_pt = (int) bfd_get_start_address (exec_bfd); - debuglogs (1, "create_inferior(exexfile=%s, args=%s, env=%s)", execfile, args, env); + debuglogs (3, "create_inferior(exexfile=%s, args=%s, env=%s)", execfile, args, env); /* The "process" (board) is already stopped awaiting our commands, and the program is already downloaded. We just set its PC and go. */ @@ -524,6 +575,7 @@ monitor_open(args, name, from_tty) char *name; int from_tty; { + TERMINAL *temptempio; if (args == NULL) error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\ @@ -547,6 +599,20 @@ monitor_open(args, name, from_tty) SERIAL_RAW(monitor_desc); +#ifndef __GO32__ + /* some systems only work with 2 stop bits */ + if (STOPBITS == 2) { + temptempio = (TERMINAL *)SERIAL_GET_TTY_STATE(monitor_desc); +#ifdef HAVE_SGTTY + temptempio->sg_cflag |= baud_rate | CSTOPB; +#else + temptempio->c_cflag |= baud_rate | CSTOPB; +#endif + SERIAL_SET_TTY_STATE(monitor_desc, temptempio); + debuglogs (4, "Set serial port to 2 stop bits"); + } +#endif /* __GO32__ */ + #if defined (LOG_FILE) log_file = fopen (LOG_FILE, "w"); if (log_file == NULL) @@ -668,6 +734,8 @@ monitor_wait (pid, status) status->kind = TARGET_WAITKIND_STOPPED; status->value.sig = TARGET_SIGNAL_TRAP; + + timeout = old_timeout; return 0; @@ -724,7 +792,7 @@ void monitor_fetch_register (regno) int regno; { - int val, j; + int newval, val, j; debuglogs (1, "monitor_fetch_register (reg=%s)", get_reg_name (regno)); @@ -741,6 +809,10 @@ monitor_fetch_register (regno) } val = get_hex_word(); /* get the value, ignore junk */ + + + /* supply register stores in target byte order, so swap here */ + SWAP_TARGET_AND_HOST (&val, 4); supply_register (regno, (char *) &val); if (*ROMDELIM(GET_REG) != 0) { @@ -882,6 +954,9 @@ monitor_read_inferior_memory(memaddr, myaddr, len) /* Starting address of this pass. */ unsigned long startaddr; + /* Starting address of this pass. */ + unsigned long endaddr; + /* Number of bytes to read in this pass. */ int len_this_pass; @@ -909,8 +984,8 @@ monitor_read_inferior_memory(memaddr, myaddr, len) len_this_pass -= startaddr % 16; if (len_this_pass > (len - count)) len_this_pass = (len - count); - - debuglogs (3, "Display %d bytes at %x", len_this_pass, startaddr); + + debuglogs (3, "Display %d bytes at %x for Big Endian host", len_this_pass, startaddr); for (i = 0; i < len_this_pass; i++) { printf_monitor (ROMCMD(GET_MEM), startaddr, startaddr); @@ -923,14 +998,14 @@ monitor_read_inferior_memory(memaddr, myaddr, len) get_hex_word(1); /* strip away the address */ } get_hex_byte (&myaddr[count++]); /* get the value at this address */ - + if (*ROMDELIM(GET_MEM) != 0) { printf_monitor (CMD_END); } expect_prompt (1); startaddr += 1; } - } + } return len; } @@ -1269,13 +1344,13 @@ monitor_load_srec (args, protocol) type = 3; /* switch to a 4 byte address record */ fflush (stdout); } - printf_filtered ("\n"); free (buffer); } else { debuglogs (3, "%s doesn't need to be loaded", s->name); } s = s->next; } + printf_filtered ("\n"); /* write a type 7 terminator record. no data for a type 7, diff --git a/gdb/monitor.h b/gdb/monitor.h index f3aff8cb466..aa3fc7032c1 100644 --- a/gdb/monitor.h +++ b/gdb/monitor.h @@ -48,6 +48,8 @@ struct monitor_ops { struct target_ops *target; /* target operations */ char *loadtypes; /* the load types that are supported */ char *loadprotos; /* the load protocols that are supported */ + char *baudrates; /* supported baud rates */ + int stopbits; /* number of stop bits */ char **regnames; /* array of register names in ascii */ }; @@ -73,6 +75,8 @@ extern struct monitor_ops *current_monitor; #define PROMPT (current_monitor->prompt) #define TARGET_OPS (current_monitor->target) #define TARGET_NAME (current_monitor->target->to_shortname) +#define BAUDRATES (current_monitor->baudrates) +#define STOPBITS (current_monitor->stopbits) #define REGNAMES(x) (current_monitor->regnames[x]) #define ROMCMD(x) (x.cmd) #define ROMDELIM(x) (x.delim) diff --git a/gdb/op50-rom.c b/gdb/op50-rom.c index 9e7a63c65db..9ae1d53df6f 100644 --- a/gdb/op50-rom.c +++ b/gdb/op50-rom.c @@ -138,6 +138,8 @@ struct monitor_ops op50n_cmds = { &op50n_ops, /* target operations */ "none,srec,default", /* load types */ "none", /* load types */ + "2400,4800,9600,19200,exta,38400,extb", /* supported baud rates */ + 1, /* number of stop bits */ op50n_regnames }; diff --git a/gdb/rom68k-rom.c b/gdb/rom68k-rom.c index 57398fd65a6..a71afea89b8 100644 --- a/gdb/rom68k-rom.c +++ b/gdb/rom68k-rom.c @@ -138,6 +138,8 @@ struct monitor_ops rom68k_cmds = { &rom68k_ops, /* target operations */ "none,srec,default", /* load types */ "none", /* load protocols */ + "9600", /* supported baud rates */ + 1, /* number of stop bits */ rom68k_regnames /* registers names */ }; diff --git a/gdb/w89k-rom.c b/gdb/w89k-rom.c index 2afe37f9a2b..e2536f87a75 100644 --- a/gdb/w89k-rom.c +++ b/gdb/w89k-rom.c @@ -138,6 +138,8 @@ struct monitor_ops w89k_cmds = { &w89k_ops, /* target operations */ "none,srec,default", /* load types */ "none,xmodem", /* load protocols */ + "9600", /* supported baud rates */ + 1, /* number of stop bits */ w89k_regnames /* registers names */ };