From: DJ Delorie Date: Tue, 26 Mar 2002 23:29:30 +0000 (+0000) Subject: merge from gcc X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=cfed07154c9448b8dd40c8994fc2a03a3f7df090;p=binutils-gdb.git merge from gcc --- diff --git a/libiberty/ChangeLog b/libiberty/ChangeLog index f92fef840e1..6b81d80ab52 100644 --- a/libiberty/ChangeLog +++ b/libiberty/ChangeLog @@ -1,3 +1,9 @@ +2002-03-26 H.J. Lu (hjl@gnu.org) + + * config.table: Support --with-build-subdir. + * configure.in: Likewise. + * configure: Rebuild. + 2002-03-18 Stuart Griffith * strtod.c (strtod): Increment 8 chars, not 7, when `infinity' diff --git a/libiberty/config.table b/libiberty/config.table index fa892c001e3..6118a9c8256 100644 --- a/libiberty/config.table +++ b/libiberty/config.table @@ -1,3 +1,9 @@ +# Don't build the shared library for build. +if [ -n "${with_build_subdir}" ]; then + enable_shared=no +fi + +frag= case "${host}" in rs6000-ibm-aix3.1 | rs6000-ibm-aix) frag=mh-aix ;; @@ -8,7 +14,11 @@ case "${host}" in i[345]86-*-windows*) frag=mh-windows ;; esac -frags=$frag +if [ -n "${frag}" ]; then + frags=${libiberty_topdir}/libiberty/config/$frag +else + frags= +fi # If they didn't specify --enable-shared, don't generate shared libs. case "${enable_shared}" in @@ -18,31 +28,26 @@ case "${enable_shared}" in *) shared=yes ;; esac if [ "${shared}" = "yes" ]; then + frag= case "${host}" in *-*-cygwin*) ;; - alpha*-*-linux*) frags="${frags} ../../config/mh-elfalphapic" ;; - arm*-*-*) frags="${frags} ../../config/mh-armpic" ;; - hppa*-*-*) frags="${frags} ../../config/mh-papic" ;; - i[3456]86-*-*) frags="${frags} ../../config/mh-x86pic" ;; + alpha*-*-linux*) frag=mh-elfalphapic ;; + arm*-*-*) frag=mh-armpic ;; + hppa*-*-*) frag=mh-papic ;; + i[3456]86-*-*) frag=mh-x86pic ;; powerpc*-*-aix*) ;; - powerpc*-*-*) frags="${frags} ../../config/mh-ppcpic" ;; - sparc*-*-*) frags="${frags} ../../config/mh-sparcpic" ;; - *-*-*) frags="${frags} ../../config/mh-${host_cpu}pic" ;; + powerpc*-*-*) frag=mh-ppcpic ;; + sparc*-*-*) frag=mh-sparcpic ;; + *) frag=mh-${host_cpu}pic ;; esac + if [ -n "${frag}" ]; then + frags="${frags} ${libiberty_topdir}/config/${frag}" + fi fi echo "# Warning: this fragment is automatically generated" > temp-frag for frag in ${frags}; do - case ${frag} in - ../* ) - if [ ${srcdir} = . ]; then - [ -n "${with_target_subdir}" ] && frag=../${frag} - [ -n "${with_multisrctop}" ] && frag=${with_multisrctop}${frag} - fi - ;; - esac - frag=${srcdir}/${xsrcdir}config/$frag if [ -f ${frag} ]; then echo "Appending ${frag} to xhost-mkfrag" echo "# Following fragment copied from ${frag}" >> temp-frag diff --git a/libiberty/configure b/libiberty/configure index e2dd9bfb15a..cbbec358a71 100755 --- a/libiberty/configure +++ b/libiberty/configure @@ -12,7 +12,9 @@ ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help - --with-target-subdir=SUBDIR Configuring in a subdirectory" + --with-target-subdir=SUBDIR Configuring in a subdirectory for target" +ac_help="$ac_help + --with-build-subdir=SUBDIR Configuring in a subdirectory for build" ac_help="$ac_help --with-cross-host=HOST Configuring with a cross compiler" ac_help="$ac_help @@ -40,7 +42,6 @@ program_suffix=NONE program_transform_name=s,x,x, silent= site= -sitefile= srcdir= target=NONE verbose= @@ -155,7 +156,6 @@ Configuration: --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages - --site-file=FILE use FILE as the site file --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX @@ -326,11 +326,6 @@ EOF -site=* | --site=* | --sit=*) site="$ac_optarg" ;; - -site-file | --site-file | --site-fil | --site-fi | --site-f) - ac_prev=sitefile ;; - -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*) - sitefile="$ac_optarg" ;; - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) @@ -496,16 +491,12 @@ fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. -if test -z "$sitefile"; then - if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi -else - CONFIG_SITE="$sitefile" fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then @@ -551,6 +542,12 @@ if test "${with_target_subdir+set}" = set; then : fi +# Check whether --with-build-subdir or --without-build-subdir was given. +if test "${with_build_subdir+set}" = set; then + withval="$with_build_subdir" + : +fi + # Check whether --with-cross-host or --without-cross-host was given. if test "${with_cross_host+set}" = set; then withval="$with_cross_host" @@ -565,7 +562,10 @@ fi if test "${srcdir}" = "."; then - if test -z "${with_target_subdir}"; then + if test -n "${with_build_subdir}"; then + libiberty_topdir="${srcdir}/../.." + with_target_subdir= + elif test -z "${with_target_subdir}"; then libiberty_topdir="${srcdir}/.." else if test "${with_target_subdir}" != "."; then @@ -3672,6 +3672,7 @@ srcdir=${srcdir} host=${host} target=${target} with_target_subdir=${with_target_subdir} +with_build_subdir=${with_build_subdir} with_multisubdir=${with_multisubdir} ac_configure_args="--enable-multilib ${ac_configure_args}" CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} @@ -3681,7 +3682,7 @@ EOF cat >> $CONFIG_STATUS <<\EOF test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h if test -n "$CONFIG_FILES"; then - if test -n "${with_target_subdir}"; then + if test -n "${with_build_subdir}" || test -n "${with_target_subdir}"; then # FIXME: We shouldn't need to set ac_file ac_file=Makefile . ${libiberty_topdir}/config-ml.in diff --git a/libiberty/configure.in b/libiberty/configure.in index f37fdc75b53..0de0f8ac285 100644 --- a/libiberty/configure.in +++ b/libiberty/configure.in @@ -5,14 +5,19 @@ AC_INIT(pexecute.c) dnl We use these options to decide which functions to include. AC_ARG_WITH(target-subdir, -[ --with-target-subdir=SUBDIR Configuring in a subdirectory]) +[ --with-target-subdir=SUBDIR Configuring in a subdirectory for target]) +AC_ARG_WITH(build-subdir, +[ --with-build-subdir=SUBDIR Configuring in a subdirectory for build]) AC_ARG_WITH(cross-host, [ --with-cross-host=HOST Configuring with a cross compiler]) AC_ARG_WITH(newlib, [ --with-newlib Configuring with newlib]) if test "${srcdir}" = "."; then - if test -z "${with_target_subdir}"; then + if test -n "${with_build_subdir}"; then + libiberty_topdir="${srcdir}/../.." + with_target_subdir= + elif test -z "${with_target_subdir}"; then libiberty_topdir="${srcdir}/.." else if test "${with_target_subdir}" != "."; then @@ -417,7 +422,7 @@ AC_SUBST(INSTALL_DEST) AC_OUTPUT(Makefile testsuite/Makefile, [test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h if test -n "$CONFIG_FILES"; then - if test -n "${with_target_subdir}"; then + if test -n "${with_build_subdir}" || test -n "${with_target_subdir}"; then # FIXME: We shouldn't need to set ac_file ac_file=Makefile . ${libiberty_topdir}/config-ml.in @@ -427,6 +432,7 @@ srcdir=${srcdir} host=${host} target=${target} with_target_subdir=${with_target_subdir} +with_build_subdir=${with_build_subdir} with_multisubdir=${with_multisubdir} ac_configure_args="--enable-multilib ${ac_configure_args}" CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}