From: Fred Fish Date: Sun, 23 Feb 1997 04:01:39 +0000 (+0000) Subject: * doc/internals.texi (CPU backend): Fix typo in md_section_align X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=d160b69e7409eccd6c828cc21adeaba8eabe852e;p=binutils-gdb.git * doc/internals.texi (CPU backend): Fix typo in md_section_align description. start-sanitize-tic80 * config/tc-tic80.h (NEED_FX_R_TYPE): Define. * config/tc-tic80.c (find_opcode): Add code to support O_symbol operands. (build_insn): Grab a frag early so we can use the address in fixups. Take one's complement of BITNUM values before insertion in opcode. Add code to support O_symbol operands. (md_apply_fix): Replace unimplemented warning with implementation. (md_pcrel_from): Ditto. (tc_coff_fix2rtype): Ditto. end-sanitize-tic80 --- diff --git a/gas/ChangeLog b/gas/ChangeLog index d87dbe18bc1..2855206882b 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,18 @@ +Sat Feb 22 20:53:01 1997 Fred Fish + * doc/internals.texi (CPU backend): Fix typo in md_section_align + description. +start-sanitize-tic80 + * config/tc-tic80.h (NEED_FX_R_TYPE): Define. + * config/tc-tic80.c (find_opcode): Add code to support O_symbol + operands. + (build_insn): Grab a frag early so we can use the address in + fixups. Take one's complement of BITNUM values before insertion + in opcode. Add code to support O_symbol operands. + (md_apply_fix): Replace unimplemented warning with implementation. + (md_pcrel_from): Ditto. + (tc_coff_fix2rtype): Ditto. +end-sanitize-tic80 + Fri Feb 21 14:34:31 1997 Martin M. Hunt start-sanitize-d30v * config/tc-d30v.c (parallel_ok): New function. diff --git a/gas/config/tc-tic80.c b/gas/config/tc-tic80.c index 83d0e0900a3..cd2c0dcad57 100644 --- a/gas/config/tc-tic80.c +++ b/gas/config/tc-tic80.c @@ -381,9 +381,28 @@ find_opcode (opcode, myops) match = 0; } break; + case O_symbol: + if ((bits < 32) && (flags & TIC80_OPERAND_PCREL)) + { + /* For now we only allow PC relative relocations in the + short immediate fields, like the TI assembler. + FIXME: Should be able to choose "best-fit". */ + } + else if ((bits == 32) && (flags & TIC80_OPERAND_BASEREL)) + { + /* For now we only allow base relative relocations in + the long immediate fields, like the TI assembler. + FIXME: Should be able to choose "best-fit". */ + } + else + { + /* Symbols that don't match one of the above cases are + rejected as an operand. */ + match = 0; + } + break; case O_illegal: case O_absent: - case O_symbol: case O_symbol_rva: case O_big: case O_uminus: @@ -524,6 +543,11 @@ build_insn (opcode, opers) /* Start with the raw opcode bits from the opcode table. */ insn[0] = opcode -> opcode; + /* We are going to insert at least one 32 bit opcode so get the + frag now. */ + + f = frag_more (4); + /* For each operand expression, insert the appropriate bits into the instruction . */ for (expi = 0, opi = -1; opers[expi].X_op != O_illegal; expi++) @@ -576,6 +600,11 @@ build_insn (opcode, opers) /* Endmask values of 0 and 32 give identical results */ num = 0; } + else if ((flags & TIC80_OPERAND_BITNUM)) + { + /* BITNUM values are stored in one's complement form */ + num = (~num & 0x1F); + } /* Mask off upper bits, just it case it is signed and is negative */ if (bits < 32) { @@ -588,9 +617,33 @@ build_insn (opcode, opers) insn[1] = num; } break; + case O_symbol: + if (flags & TIC80_OPERAND_PCREL) + { + fix_new_exp (frag_now, + f - (frag_now -> fr_literal), + 4, /* FIXME! how is this used? */ + &opers[expi], + 1, + R_MPPCR); + } + else if (flags & TIC80_OPERAND_BASEREL) + { + extended++; + fix_new_exp (frag_now, + (f + 4) - (frag_now -> fr_literal), + 4, + &opers[expi], + 0, /* FIXME! should allow pcrel */ + R_RELLONGX); /* FIXME! should be the right reloc type */ + } + else + { + internal_error ("symbol reloc that is not PC or BASEREG relative"); + } + break; case O_illegal: case O_absent: - case O_symbol: case O_symbol_rva: case O_big: case O_uminus: @@ -624,7 +677,6 @@ build_insn (opcode, opers) /* Write out the instruction, either 4 or 8 bytes. */ - f = frag_more (4); md_number_to_chars (f, insn[0], 4); if (extended) { @@ -814,22 +866,38 @@ md_apply_fix (fixP, val) fixS *fixP; long val; { - internal_error ("md_apply_fix() not implemented yet"); - abort (); + char *dest = fixP -> fx_frag -> fr_literal + fixP -> fx_where; + + switch (fixP -> fx_r_type) + { + case R_RELLONGX: + md_number_to_chars (dest, (valueT) val, 4); + break; + case R_MPPCR: + /* FIXME! - should check for overflow of the 15 bit field */ + *dest++ = val >> 2; + *dest = (*dest & 0x80) | val >> 10; + break; + default: + internal_error_a ("unhandled relocation type in fixup", fixP -> fx_r_type); + break; + } } /* Functions concerning relocs. */ /* The location from which a PC relative jump should be calculated, - given a PC relative reloc. */ + given a PC relative reloc. + + For the TIc80, this is the address of the 32 bit opcode containing + the PC relative field. */ long md_pcrel_from (fixP) fixS *fixP; { - internal_error ("md_pcrel_from() not implemented yet"); - abort (); + return (fixP -> fx_frag -> fr_address + fixP -> fx_where) ; } /* @@ -866,8 +934,7 @@ short tc_coff_fix2rtype (fixP) fixS *fixP; { - internal_error ("tc_coff_fix2rtype() not implemented yet"); - abort (); + return (fixP -> fx_r_type); } #endif /* OBJ_COFF */ diff --git a/gas/config/tc-tic80.h b/gas/config/tc-tic80.h index c900bc1acda..7974aeb1e4c 100644 --- a/gas/config/tc-tic80.h +++ b/gas/config/tc-tic80.h @@ -26,6 +26,10 @@ #define TARGET_FORMAT "coff-tic80" #define BFD_ARCH TARGET_ARCH +/* We need the extra field in the fixup struct to put the relocation in. */ + +#define NEED_FX_R_TYPE + /* Define md_number_to_chars as the appropriate standard big endian or little endian function. Should we someday support endianness as a runtime decision, this will need to change. */