From: Jagan Teki Date: Mon, 12 Jun 2017 18:21:41 +0000 (+0530) Subject: board: Add support for Engicam i.CoreM6 Quad/Dual boards X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=d3a63da1631295ea71f860e6a85e0ca78c350f7d;p=buildroot.git board: Add support for Engicam i.CoreM6 Quad/Dual boards Add initial support for Engicam i.CoreM6 Quad/Dual board with below features: - U-Boot 2017.05 - Linux 4.11 - Default packages from buildroot Cc: Thomas Petazzoni Cc: Matteo Lisi Cc: Michael Trimarchi Signed-off-by: Jagan Teki Signed-off-by: Thomas Petazzoni --- diff --git a/DEVELOPERS b/DEVELOPERS index 7d8b410a29..8939987088 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -827,6 +827,10 @@ F: package/angularjs/ N: Ilias Apalodimas F: package/keepalived/ +N: Jagan Teki +F: board/engicam/ +F: configs/engicam_imx6q_icore_defconfig + N: James Knight F: package/atkmm/ F: package/cairomm/ diff --git a/board/engicam/genimage.cfg b/board/engicam/genimage.cfg new file mode 100644 index 0000000000..43c81cfd9e --- /dev/null +++ b/board/engicam/genimage.cfg @@ -0,0 +1,38 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "imx6q-icore.dtb" + } + } + size = 16M +} + +image sdcard.img { + hdimage { + } + + partition SPL { + in-partition-table = "no" + image = "SPL" + offset = 1024 + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot-dtb.img" + offset = 69K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + } +} diff --git a/board/engicam/readme.txt b/board/engicam/readme.txt new file mode 100644 index 0000000000..eb7503f629 --- /dev/null +++ b/board/engicam/readme.txt @@ -0,0 +1,66 @@ +***************************************** +Buildroot for Engicam i.MX6 SOM platforms: +***************************************** + +This file documents the Buildroot support for all Engicam i.MX6 SOM +platform boards. + +i.CoreM6 Quad/Dual SOM Starter kits: +https://www.engicam.com/vis-prod/101120 + +This configuration uses U-Boot mainline and kernel mainline. + +Build +===== + +First, configure Buildroot for the Engicam i.MX SOM's: + +- for i.CoreM6 Quad/Dual: + + make engicam_imx6q_icore_defconfig + +Build all components: + + make + +You will find the following files in output/images/: +- for i.CoreM6 Quad/Dual: + - imx6q-icore.dtb + - rootfs.ext4 + - rootfs.tar + - sdcard.img + - SPL + - u-boot-dtb.img + - uImage + +Create a bootable SD card +========================= + +To determine the device associated to the SD card have a look in the +/proc/partitions file: + + cat /proc/partitions + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be dumped on a SD card. Launch the following +command as root: + + dd if=output/images/sdcard.img of=/dev/ + +*** WARNING! This will destroy all the card content. Use with care! *** + +For details about the medium image layout, see the definition in +board/engicam/genimage.cfg + +Boot the i.CoreM6 boards with SD boot: +===================================== + +To boot your newly created system: +- insert the SD card in the SD slot of the board; +- connect 3-wire RS232 serial port J28 on board, and connect with other + serial end or USB cable(if serial-to-usb converter used) using + a terminal emulator at 115200 bps, 8n1; +- close JM3 for sd boot. +- power on the board. + +Enjoy! diff --git a/configs/engicam_imx6q_icore_defconfig b/configs/engicam_imx6q_icore_defconfig new file mode 100644 index 0000000000..63454eef3c --- /dev/null +++ b/configs/engicam_imx6q_icore_defconfig @@ -0,0 +1,41 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y +BR2_ARM_FPU_VFPV3=y + +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y + +# System +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.05" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6q_icore_mmc" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="SPL" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11" +BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-icore" + +# Filesystem +BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual Starter Kit" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/genimage.cfg"