From: Eli Zaretskii <eliz@gnu.org>
Date: Sat, 20 Jan 2007 16:51:56 +0000 (+0000)
Subject: 	* agentexpr.texi: Fix typos.
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=d3e8051bddb07bad7efd7c5e7b8cdae4cfbf99e6;p=binutils-gdb.git

	* agentexpr.texi: Fix typos.
	* annotate.texinfo: Likewise.
	* gdb.texinfo: Likewise.
	* gdbint.texinfo: Likewise.
	* observer.texi: Likewise.
	* stabs.texinfo: Likewise.
---

diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index 266d975dfc9..a4e6a8b4a67 100644
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -1,3 +1,12 @@
+2007-01-20  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>  (tiny change)
+
+	* agentexpr.texi: Fix typos.
+	* annotate.texinfo: Likewise.
+	* gdb.texinfo: Likewise.
+	* gdbint.texinfo: Likewise.
+	* observer.texi: Likewise.
+	* stabs.texinfo: Likewise.
+
 2007-01-20  Markus Deuling  <deuling@de.ibm.com>  (tiny change)
 
 	* gdbint.texinfo (Support Libraries): Remove mmalloc
diff --git a/gdb/doc/agentexpr.texi b/gdb/doc/agentexpr.texi
index c1eefbc48d2..1b893d5a7bb 100644
--- a/gdb/doc/agentexpr.texi
+++ b/gdb/doc/agentexpr.texi
@@ -17,7 +17,7 @@
 @node Agent Expressions
 @appendix The GDB Agent Expression Mechanism
 
-In some applications, it is not feasable for the debugger to interrupt
+In some applications, it is not feasible for the debugger to interrupt
 the program's execution long enough for the developer to learn anything
 helpful about its behavior.  If the program's correctness depends on its
 real-time behavior, delays introduced by a debugger might cause the
@@ -221,7 +221,7 @@ their sum, as an integer.
 
 In this example, @code{add} is the name of the bytecode, and
 @code{(0x02)} is the one-byte value used to encode the bytecode, in
-hexidecimal.  The phrase ``@var{a} @var{b} @result{} @var{a+b}'' shows
+hexadecimal.  The phrase ``@var{a} @var{b} @result{} @var{a+b}'' shows
 the stack before and after the bytecode executes.  Beforehand, the stack
 must contain at least two values, @var{a} and @var{b}; since the top of
 the stack is to the right, @var{b} is on the top of the stack, and
diff --git a/gdb/doc/annotate.texinfo b/gdb/doc/annotate.texinfo
index 61336141090..ed8509ea024 100644
--- a/gdb/doc/annotate.texinfo
+++ b/gdb/doc/annotate.texinfo
@@ -20,7 +20,7 @@
 @set DATE July 2003
 
 @c NOTE: cagney/2003-07-28:
-@c Don't make this migration doccument an appendix of GDB's user guide.
+@c Don't make this migration document an appendix of GDB's user guide.
 @c By keeping this separate, the size of the user guide is contained. If
 @c the user guide to get much bigger it would need to switch to a larger,
 @c more expensive, form factor and would drive up the manuals publication
@@ -161,7 +161,7 @@ assume that specific @value{GDBN} commands provide specific information.
 Any change to @value{GDBN}'s @sc{cli} output modifies or removes that
 information and, consequently, likely breaks the client.
 
-Since the @sc{gdb/mi} output is independant of the @sc{cli}, it does not
+Since the @sc{gdb/mi} output is independent of the @sc{cli}, it does not
 have this problem.
 
 @section Scalability
@@ -200,8 +200,8 @@ The annotation mechanism was implemented by interspersing @sc{cli} print
 statements with various annotations.  As a consequence, any @sc{cli}
 output change can alter the annotation output.
 
-Since the @sc{gdb/mi} output is independant of the @sc{cli}, and the
-@sc{gdb/mi} is increasingly implemented independant of the @sc{cli}
+Since the @sc{gdb/mi} output is independent of the @sc{cli}, and the
+@sc{gdb/mi} is increasingly implemented independent of the @sc{cli}
 code, its long term maintenance is much easier.
 
 @node Migrating to GDB/MI
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 10e8b07a9fc..1a815050303 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -3217,7 +3217,7 @@ zero, @value{GDBN} will never try to use hardware watchpoints, even if
 the underlying system supports them.  (Note that hardware-assisted
 watchpoints that were set @emph{before} setting
 @code{can-use-hw-watchpoints} to zero will still use the hardware
-mechanism of watching expressiion values.)
+mechanism of watching expression values.)
 
 @table @code
 @item set can-use-hw-watchpoints
@@ -4664,7 +4664,7 @@ This entry point is encoded by the linker when the application is built,
 and is likely before the user entry point @code{main} (or equivalent) is called.
 
 @item set backtrace past-entry off
-Backtraces will stop when they encouter the internal entry point of an
+Backtraces will stop when they encounter the internal entry point of an
 application.  This is the default.
 
 @item show backtrace past-entry
@@ -5148,7 +5148,7 @@ To avoid unexpected substitution results, a rule is applied only if the
 For instance, a rule substituting  @file{/usr/source} into
 @file{/mnt/cross} will be applied to @file{/usr/source/foo-1.0} but
 not to @file{/usr/sourceware/foo-2.0}.  And because the substitution
-is applied only at the begining of the directory name, this rule will
+is applied only at the beginning of the directory name, this rule will
 not be applied to @file{/root/usr/source/baz.c} either.
 
 In many cases, you can achieve the same result using the @code{directory}
@@ -5181,7 +5181,7 @@ path; this moves it forward, so @value{GDBN} searches it sooner.
 @kindex cdir
 @kindex cwd
 @vindex $cdir@r{, convenience variable}
-@vindex $cwdr@r{, convenience variable}
+@vindex $cwd@r{, convenience variable}
 @cindex compilation directory
 @cindex current directory
 @cindex working directory
@@ -6171,7 +6171,7 @@ If the number is 0, then the printing is unlimited.
 @item set print repeats
 @cindex repeated array elements
 Set the threshold for suppressing display of repeated array
-elelments.  When the number of consecutive identical elements of an
+elements.  When the number of consecutive identical elements of an
 array exceeds the threshold, @value{GDBN} prints the string
 @code{"<repeats @var{n} times>"}, where @var{n} is the number of
 identical repetitions, instead of displaying the identical elements
@@ -6382,8 +6382,8 @@ Show whether C@t{++} static members are printed or not.
 
 @item set print pascal_static-members
 @itemx set print pascal_static-members on
-@cindex static members of Pacal objects
-@cindex Pacal objects, static members display
+@cindex static members of Pascal objects
+@cindex Pascal objects, static members display
 Print static members when displaying a Pascal object.  The default is on.
 
 @item set print pascal_static-members off
@@ -6830,7 +6830,7 @@ to enable, disable, or remove a memory region, you specify that number.
 Define a memory region bounded by @var{lower} and @var{upper} with
 attributes @var{attributes}@dots{}, and add it to the list of regions
 monitored by @value{GDBN}.  Note that @var{upper} == 0 is a special
-case: it is treated as the the target's maximum memory address.
+case: it is treated as the target's maximum memory address.
 (0xffff on 16 bit targets, 0xffffffff on 32 bit targets, etc.)
 
 @item mem auto
@@ -6895,7 +6895,7 @@ Memory is read/write.  This is the default.
 @end table
 
 @subsubsection Memory Access Size
-The acccess size attributes tells @value{GDBN} to use specific sized
+The access size attribute tells @value{GDBN} to use specific sized
 accesses in the memory region.  Often memory mapped device registers
 require specific sized accesses.  If no access size attribute is
 specified, @value{GDBN} may use accesses of any size.
@@ -11326,7 +11326,7 @@ selected stack frame returns naturally.
 @cindex calling functions
 @cindex inferior functions, calling
 @item print @var{expr}
-Evaluate the expression @var{expr} and display the resuling value.
+Evaluate the expression @var{expr} and display the resulting value.
 @var{expr} may include calls to functions in the program being
 debugged.
 
@@ -11773,7 +11773,7 @@ memory footprint by preventing it from automatically loading the
 symbols from shared libraries.  To that end, type @kbd{set
 auto-solib-add off} before running the inferior, then load each
 library whose debug symbols you do need with @kbd{sharedlibrary
-@var{regexp}}, where @var{regexp} is a regular expresion that matches
+@var{regexp}}, where @var{regexp} is a regular expression that matches
 the libraries whose symbols you want to be loaded.
 
 @kindex show auto-solib-add
@@ -11879,9 +11879,9 @@ directories to search for shared libraries.  @samp{solib-search-path}
 is used after @samp{sysroot} fails to locate the library, or if the
 path to the library is relative instead of absolute.  If you want to
 use @samp{solib-search-path} instead of @samp{sysroot}, be sure to set
-@samp{sysroot} to a nonexistant directory to prevent @value{GDBN} from
+@samp{sysroot} to a nonexistent directory to prevent @value{GDBN} from
 finding your host's libraries.  @samp{sysroot} is preferred; setting
-it to a nonexistant directory may interfere with automatic loading
+it to a nonexistent directory may interfere with automatic loading
 of shared library symbols.
 
 @kindex show solib-search-path
@@ -12497,7 +12497,7 @@ Send an arbitrary @var{command} string to the remote monitor.
 @section Connecting to a remote target
 
 On the @value{GDBN} host machine, you will need an unstripped copy of
-your program, since @value{GDBN} needs symobl and debugging information.
+your program, since @value{GDBN} needs symbol and debugging information.
 Start up @value{GDBN} as usual, using the name of the local copy of your
 program as the first argument.
 
@@ -12766,7 +12766,7 @@ system-call-allowed}.
 
 @table @code
 @item set remoteaddresssize @var{bits}
-@cindex adress size for remote targets
+@cindex address size for remote targets
 @cindex bits in remote address
 Set the maximum size of address in a memory packet to the specified
 number of bits.  @value{GDBN} will mask off the address bits above
@@ -13653,7 +13653,7 @@ the Win32 API @code{GetThreadSelectorEntry} function.
 It takes an optional argument that is evaluated to
 a long value to give the information about this given selector.
 Without argument, this command displays information
-about the the six segment registers.
+about the six segment registers.
 
 @kindex info dll
 @item info dll
@@ -13996,7 +13996,7 @@ only the current thread.
 This command shows the state of current thread suspension.
 
 @item set thread run
-This comamnd sets whether the current thread is allowed to run.
+This command sets whether the current thread is allowed to run.
 
 @item show thread run
 Show whether the current thread is allowed to run.
@@ -14664,7 +14664,7 @@ The following @value{GDBN} commands are specific to the M32R monitor:
 @item set download-path @var{path}
 @kindex set download-path
 @cindex find downloadable @sc{srec} files (M32R)
-Set the default path for finding donwloadable @sc{srec} files.
+Set the default path for finding downloadable @sc{srec} files.
 
 @item show download-path
 @kindex show download-path
@@ -15008,7 +15008,7 @@ When triggered, it can capture low level data, like: @code{PC}, @code{LSEA},
 @table @code
 @kindex hwatch
 @item hwatch @var{conditional}
-Set hardware watchpoint on combination of Load/Store Effecive Address(es)
+Set hardware watchpoint on combination of Load/Store Effective Address(es)
 or Data.  For example:
 
 @code{hwatch ($LEA == my_var) && ($LDATA < 50) || ($SEA == my_var) && ($SDATA >= 50)}
@@ -15073,7 +15073,7 @@ SDS monitor, running on a PowerPC board (such as Motorola's ADS).
 @end table
 
 @cindex SDS protocol
-The following commands specifi to the SDS protocol are supported
+The following commands specify to the SDS protocol are supported
 by@value{GDBN}:
 
 @table @code
@@ -15695,13 +15695,13 @@ Show the current setting of MIPS debugging messages.
 @subsection HPPA
 @cindex HPPA support
 
-When @value{GDBN} is debugging te HP PA architecture, it provides the
+When @value{GDBN} is debugging the HP PA architecture, it provides the
 following special commands:
 
 @table @code
 @item set debug hppa
 @kindex set debug hppa
-THis command determines whether HPPA architecture specific debugging
+This command determines whether HPPA architecture specific debugging
 messages are to be displayed.
 
 @item show debug hppa
@@ -16500,11 +16500,11 @@ handle SIGALRM pass
 end
 
 define hook-continue
-handle SIGLARM pass
+handle SIGALRM pass
 end
 @end smallexample
 
-As a further example, to hook at the begining and end of the @code{echo}
+As a further example, to hook at the beginning and end of the @code{echo}
 command, and to add extra text to the beginning and end of the message,
 you could define:
 
@@ -17733,7 +17733,7 @@ end is to make your project known to @value{GDBN} developers and
 follow development on @email{gdb@@sourceware.org} and
 @email{gdb-patches@@sourceware.org}.  There is also the mailing list
 @email{dmi-discuss@@lists.freestandards.org}, hosted by the Free Standards
-Group, which has the aim of creating a a more general MI protocol
+Group, which has the aim of creating a more general MI protocol
 called Debugger Machine Interface (DMI) that will become a standard
 for all debuggers, not just @value{GDBN}.
 @cindex mailing lists
@@ -17871,7 +17871,7 @@ the @sc{gdb/mi} interface.  In these examples, @samp{->} means that the
 following line is passed to @sc{gdb/mi} as input, while @samp{<-} means
 the output received from @sc{gdb/mi}.
 
-Note the the line breaks shown in the examples are here only for
+Note the line breaks shown in the examples are here only for
 readability, they don't appear in the real output.
 
 @subheading Setting a breakpoint
@@ -18232,7 +18232,7 @@ Initialize the @var{ignore-count}.
 @item -r
 Insert a regular breakpoint in all the functions whose names match the
 given regular expression.  Other flags are not applicable to regular
-expresson.
+expressions.
 @end table
 
 @subsubheading Result
@@ -18380,12 +18380,12 @@ body=[]@}
 @end smallexample
 
 Create a watchpoint.  With the @samp{-a} option it will create an
-@dfn{access} watchpoint, i.e. a watchpoint that triggers either on a
+@dfn{access} watchpoint, i.e., a watchpoint that triggers either on a
 read from or on a write to the memory location.  With the @samp{-r}
-option, the watchpoint created is a @dfn{read} watchpoint, i.e. it will
+option, the watchpoint created is a @dfn{read} watchpoint, i.e., it will
 trigger only when the memory location is accessed for reading.  Without
 either of the options, the watchpoint created is a regular watchpoint,
-i.e. it will trigger when the memory location is accessed for writing.
+i.e., it will trigger when the memory location is accessed for writing.
 @xref{Set Watchpoints, , Setting watchpoints}.
 
 Note that @samp{-break-list} will report a single list of watchpoints and
@@ -18604,7 +18604,7 @@ search path in the same order they were presented in the command.
 If blanks are needed as
 part of a directory name, double-quotes should be used around
 the name.  In the command output, the path will show up separated
-by the system directory-separator character.  The directory-seperator
+by the system directory-separator character.  The directory-separator
 character must not be used
 in any directory name.
 If no directories are specified, the current search path is displayed.
@@ -18654,7 +18654,7 @@ search path in the same order they were presented in the command.
 If blanks are needed as
 part of a directory name, double-quotes should be used around
 the name.  In the command output, the path will show up separated
-by the system directory-separator character.  The directory-seperator
+by the system directory-separator character.  The directory-separator
 character must not be used
 in any directory name.
 If no directories are specified, the current path is displayed.
@@ -19420,7 +19420,7 @@ following info:
 
 @table @samp
 @item @var{level}
-The frame number, 0 being the topmost frame, i.e. the innermost function.
+The frame number, 0 being the topmost frame, i.e., the innermost function.
 @item @var{addr}
 The @code{$pc} value for that frame.
 @item @var{func}
@@ -19521,7 +19521,7 @@ values; and if it is 2 or @code{--simple-values}, print the name,
 type and value for simple data types and the name and type for arrays,
 structures and unions.  In this last case, a frontend can immediately
 display the value of simple data types and create variable objects for
-other data types when the the user wishes to explore their values in
+other data types when the user wishes to explore their values in
 more detail.
 
 @subsubheading @value{GDBN} Command
@@ -20019,7 +20019,7 @@ is the name of the file to disassemble
 @item @var{linenum}
 is the line number to disassemble around
 @item @var{lines}
-is the the number of disassembly lines to be produced.  If it is -1,
+is the number of disassembly lines to be produced.  If it is -1,
 the whole function will be disassembled, in case no @var{end-addr} is
 specified.  If @var{end-addr} is specified as a non-zero value, and
 @var{lines} is lower than the number of disassembly lines between
@@ -20044,7 +20044,7 @@ The output for each instruction is composed of four fields:
 @end itemize
 
 Note that whatever included in the instruction field, is not manipulated
-directely by @sc{gdb/mi}, i.e. it is not possible to adjust its format.
+directly by @sc{gdb/mi}, i.e., it is not possible to adjust its format.
 
 @subsubheading @value{GDBN} Command
 
@@ -21496,7 +21496,7 @@ designed to interface @value{GDBN} to graphical user interfaces or other
 similar programs which want to interact with @value{GDBN} at a
 relatively high level.
 
-The annotation mechanism has largely been superseeded by @sc{gdb/mi}
+The annotation mechanism has largely been superseded by @sc{gdb/mi}
 (@pxref{GDB/MI}).
 
 @ignore
@@ -21536,7 +21536,7 @@ The annotation @var{level}, which is specified using the
 @option{--annotate} command line option (@pxref{Mode Options}), controls
 how much information @value{GDBN} prints together with its prompt,
 values of expressions, source lines, and other types of output.  Level 0
-is for no anntations, level 1 is for use when @value{GDBN} is run as a
+is for no annotations, level 1 is for use when @value{GDBN} is run as a
 subprocess of @sc{gnu} Emacs, level 3 is the maximum annotation suitable
 for programs that control @value{GDBN}, and level 2 annotations have
 been made obsolete (@pxref{Limitations, , Limitations of the Annotation
@@ -21865,7 +21865,7 @@ distribution.
 @c should add a web page ref...
 
 In any event, we also recommend that you submit bug reports for
-@value{GDBN}.  The prefered method is to submit them directly using
+@value{GDBN}.  The preferred method is to submit them directly using
 @uref{http://www.gnu.org/software/gdb/bugs/, @value{GDBN}'s Bugs web
 page}.  Alternatively, the @email{bug-gdb@@gnu.org, e-mail gateway} can
 be used.
@@ -22118,7 +22118,7 @@ and is located in the @file{gdb-@var{version-number}/texinfo}
 directory.
 
 If you have @TeX{} and a @sc{dvi} printer program installed, you can
-typeset and print this manual.  First switch to the the @file{gdb}
+typeset and print this manual.  First switch to the @file{gdb}
 subdirectory of the main source directory (for example, to
 @file{gdb-@value{GDBVN}/gdb}) and type:
 
@@ -22521,7 +22521,7 @@ Print the list of possible C@t{++} namespaces.
 
 @kindex maint demangle
 @item maint demangle @var{name}
-Demangle a C@t{++} or Objective-C manled @var{name}.
+Demangle a C@t{++} or Objective-C mangled @var{name}.
 
 @kindex maint deprecate
 @kindex maint undeprecate
@@ -22555,7 +22555,7 @@ either quit @value{GDBN} or create a core file of the current
 These commands take an optional parameter @var{message-text} that is
 used as the text of the error or warning message.
 
-Here's an example of using @code{indernal-error}:
+Here's an example of using @code{internal-error}:
 
 @smallexample
 (@value{GDBP}) @kbd{maint internal-error testing, 1, 2}
@@ -22658,7 +22658,7 @@ and symtabs.
 This command prints, for each object file in the program, various data
 about that object file followed by the byte cache (@dfn{bcache})
 statistics for the object file.  The objfile data includes the number
-of minimal, partical, full, and stabs symbols, the number of types
+of minimal, partial, full, and stabs symbols, the number of types
 defined by the objfile, the number of as yet unexpanded psym tables,
 the number of line tables and string tables, and the amount of memory
 used by the various tables.  The bcache statistics include the counts,
@@ -23265,7 +23265,7 @@ Reply:
 
 @item vCont?
 @cindex @samp{vCont?} packet
-Request a list of actions supporetd by the @samp{vCont} packet.
+Request a list of actions supported by the @samp{vCont} packet.
 
 Reply:
 @table @samp
@@ -24624,7 +24624,7 @@ or the full action has been completed.
 @subsection Console I/O
 @cindex console i/o as part of file-i/o
 
-By default and if not explicitely closed by the target system, the file
+By default and if not explicitly closed by the target system, the file
 descriptors 0, 1 and 2 are connected to the @value{GDBN} console.  Output
 on the @value{GDBN} console is handled as any other file output operation
 (@code{write(1, @dots{})} or @code{write(2, @dots{})}).  Console input is handled
diff --git a/gdb/doc/gdbint.texinfo b/gdb/doc/gdbint.texinfo
index 5b9f4c40b8d..9019f3c929a 100644
--- a/gdb/doc/gdbint.texinfo
+++ b/gdb/doc/gdbint.texinfo
@@ -284,7 +284,7 @@ and called functions.
 need to support @sc{dwarf}'s Call Frame Information in mind.  In fact,
 the term ``unwind'' is taken directly from that specification.
 Developers wishing to learn more about unwinders, are encouraged to
-read the the @sc{dwarf} specification.
+read the @sc{dwarf} specification.
 
 @findex frame_register_unwind
 @findex get_frame_register
@@ -1054,7 +1054,7 @@ command immediately after it is created.
 
 The first time a command is used the user will be warned and offered a
 replacement (if one exists). Note that the replacement string passed to
-@code{deprecate_cmd} should be the full name of the command, i.e. the
+@code{deprecate_cmd} should be the full name of the command, i.e., the
 entire string the user should type at the command line.
 
 @section UI-Independent Output---the @code{ui_out} Functions
@@ -2929,7 +2929,7 @@ Given the type flags representing an address class qualifier, return
 its name.
 @end deftypefn
 @deftypefn {Target Macro} int ADDRESS_CLASS_NAME_to_TYPE_FLAGS (int @var{name}, int *var{type_flags_ptr})
-Given an address qualifier name, set the @code{int} refererenced by @var{type_flags_ptr} to the type flags
+Given an address qualifier name, set the @code{int} referenced by @var{type_flags_ptr} to the type flags
 for that address class qualifier.
 @end deftypefn
 
@@ -3104,7 +3104,7 @@ their @var{reg} and @var{type} arguments in different orders.
 @cindex @code{struct value}, converting register contents to
 
 @emph{Maintainer's note: The way GDB manipulates registers is undergoing
-significant change.  Many of the macros and functions refered to in this
+significant change.  Many of the macros and functions referred to in this
 section are likely to be subject to further revision.  See
 @uref{http://sources.redhat.com/gdb/current/ari/, A.R. Index} and
 @uref{http://www.gnu.org/software/gdb/bugs, Bug Tracking Database} for
@@ -3555,7 +3555,7 @@ This method is deprecated. @xref{unwind_pc}.
 @findex unwind_pc
 @anchor{unwind_pc} Return the instruction address, in @var{this_frame}'s
 caller, at which execution will resume after @var{this_frame} returns.
-This is commonly refered to as the return address.
+This is commonly referred to as the return address.
 
 The implementation, which must be frame agnostic (work with any frame),
 is typically no more than:
@@ -3572,7 +3572,7 @@ return d10v_make_iaddr (pc);
 @item CORE_ADDR unwind_sp (struct frame_info *@var{this_frame})
 @findex unwind_sp
 @anchor{unwind_sp} Return the frame's inner most stack address.  This is
-commonly refered to as the frame's @dfn{stack pointer}.
+commonly referred to as the frame's @dfn{stack pointer}.
 
 The implementation, which must be frame agnostic (work with any frame),
 is typically no more than:
@@ -3816,7 +3816,7 @@ Return the virtual type of @var{reg}.
 @item struct type *register_type (@var{gdbarch}, @var{reg})
 @findex register_type
 If defined, return the type of register @var{reg}.  This function
-superseeds @code{DEPRECATED_REGISTER_VIRTUAL_TYPE}.  @xref{Target Architecture
+supersedes @code{DEPRECATED_REGISTER_VIRTUAL_TYPE}.  @xref{Target Architecture
 Definition, , Raw and Virtual Register Representations}.
 
 @item REGISTER_CONVERT_TO_VIRTUAL(@var{reg}, @var{type}, @var{from}, @var{to})
@@ -3841,10 +3841,10 @@ Return the appropriate register set for a core file section with name
 Define this as 1 if the target does not have a hardware single-step
 mechanism.  The macro @code{SOFTWARE_SINGLE_STEP} must also be defined.
 
-@item SOFTWARE_SINGLE_STEP(@var{signal}, @var{insert_breapoints_p})
+@item SOFTWARE_SINGLE_STEP(@var{signal}, @var{insert_breakpoints_p})
 @findex SOFTWARE_SINGLE_STEP
 A function that inserts or removes (depending on
-@var{insert_breapoints_p}) breakpoints at each possible destinations of
+@var{insert_breakpoints_p}) breakpoints at each possible destinations of
 the next instruction. See @file{sparc-tdep.c} and @file{rs6000-tdep.c}
 for examples.
 
@@ -3925,7 +3925,7 @@ definition is only used in generic code when parsing "$ps".)
 @findex DEPRECATED_POP_FRAME
 @findex frame_pop
 If defined, used by @code{frame_pop} to remove a stack frame.  This
-method has been superseeded by generic code.
+method has been superseded by generic code.
 
 @item push_dummy_call (@var{gdbarch}, @var{function}, @var{regcache}, @var{pc_addr}, @var{nargs}, @var{args}, @var{sp}, @var{struct_return}, @var{struct_addr})
 @findex push_dummy_call
@@ -3976,7 +3976,7 @@ This method has been replaced by @code{stabs_argument_has_addr}
 @findex SAVE_DUMMY_FRAME_TOS
 @anchor{SAVE_DUMMY_FRAME_TOS} Used in @samp{call_function_by_hand} to
 notify the target dependent code of the top-of-stack value that will be
-passed to the the inferior code.  This is the value of the @code{SP}
+passed to the inferior code.  This is the value of the @code{SP}
 after both the dummy frame and space for parameters/results have been
 allocated on the stack.  @xref{unwind_dummy_id}.
 
@@ -4020,7 +4020,7 @@ return-value extract and store.}
 parameter, and such a parameter should not be added.  If an architecture
 that requires per-compiler or per-function information be identified,
 then the replacement of @var{rettype} with @code{struct value}
-@var{function} should be persued.}
+@var{function} should be pursued.}
 
 @emph{Maintainer note: The @var{regcache} parameter limits this methods
 to the inner most frame.  While replacing @var{regcache} with a
@@ -4501,7 +4501,7 @@ A target vector can be completely inactive (not pushed on the target
 stack), active but not running (pushed, but not connected to a fully
 manifested inferior), or completely active (pushed, with an accessible
 inferior).  Most targets are only completely inactive or completely
-active, but some support persistant connections to a target even
+active, but some support persistent connections to a target even
 when the target has exited or not yet started.
 
 For example, connecting to the simulator using @code{target sim} does
@@ -4933,7 +4933,7 @@ The obstack mechanism provides a convenient way to allocate and free
 chunks of memory.  Each obstack is a pool of memory that is managed
 like a stack.  Objects (of any nature, size and alignment) are
 allocated and freed in a @acronym{LIFO} fashion on an obstack (see
-@code{libiberty}'s documenatation for a more detailed explanation of
+@code{libiberty}'s documentation for a more detailed explanation of
 @code{obstacks}).
 
 The most noticeable use of the @code{obstacks} in @value{GDBN} is in
@@ -4942,7 +4942,7 @@ representation of an object file.  Lots of things get allocated on
 these @code{obstacks}: dictionary entries, blocks, blockvectors,
 symbols, minimal symbols, types, vectors of fundamental types, class
 fields of types, object files section lists, object files section
-offets lists, line tables, symbol tables, partial symbol tables,
+offset lists, line tables, symbol tables, partial symbol tables,
 string tables, symbol table private data, macros tables, debug
 information sections and entries, import and export lists (som),
 unwind information (hppa), dwarf2 location expressions data.  Plus
@@ -4951,7 +4951,7 @@ names of types.
 
 An essential and convenient property of all data on @code{obstacks} is
 that memory for it gets allocated (with @code{obstack_alloc}) at
-various times during a debugging sesssion, but it is released all at
+various times during a debugging session, but it is released all at
 once using the @code{obstack_free} function.  The @code{obstack_free}
 function takes a pointer to where in the stack it must start the
 deletion from (much like the cleanup chains have a pointer to where to
@@ -5000,7 +5000,7 @@ Regex conditionals.
 
 Often it is necessary to manipulate a dynamic array of a set of
 objects.  C forces some bookkeeping on this, which can get cumbersome
-and repetative.  The @file{vec.h} file contains macros for defining
+and repetitive.  The @file{vec.h} file contains macros for defining
 and using a typesafe vector type.  The functions defined will be
 inlined when compiling, and so the abstraction cost should be zero.
 Domain checks are added to detect programming errors.
@@ -5496,7 +5496,7 @@ code, but @sc{gcc} 2.x and @sc{c89} do not.
 
 @item -Wformat-nonliteral
 Non-literal format strings, with a few exceptions, are bugs - they
-might contain unintented user-supplied format specifiers.
+might contain unintended user-supplied format specifiers.
 Since @value{GDBN} uses the @code{format printf} attribute on all
 @code{printf} like functions this checks not just @code{printf} calls
 but also calls to functions such as @code{fprintf_unfiltered}.
@@ -6032,7 +6032,7 @@ branch tag, denoting the head of the branch, does not need this.}
 To avoid version conflicts, vendors are expected to modify the file
 @file{gdb/version.in} to include a vendor unique alphabetic identifier
 (an official @value{GDBN} release never uses alphabetic characters in
-its version identifer).  E.g., @samp{6.2widgit2}, or @samp{6.2 (Widgit
+its version identifier).  E.g., @samp{6.2widgit2}, or @samp{6.2 (Widgit
 Inc Patch 2)}.
 
 @section Experimental Branches
@@ -6407,8 +6407,8 @@ Send an announcement to the mailing lists:
 @item
 @email{gdb-announce@@sources.redhat.com, GDB Announcement mailing list}
 @item
-@email{gdb@@sources.redhat.com, GDB Discsussion mailing list} and
-@email{gdb-testers@@sources.redhat.com, GDB Discsussion mailing list}
+@email{gdb@@sources.redhat.com, GDB Discussion mailing list} and
+@email{gdb-testers@@sources.redhat.com, GDB Testers mailing list}
 @end itemize
 
 @emph{Pragmatics: The branch creation is sent to the announce list to
@@ -6615,7 +6615,7 @@ $
 @emph{Don't worry about the @file{gdb.info-??} or
 @file{gdb/p-exp.tab.c}.  They were generated (and yes @file{gdb.info-1}
 was also generated only something strange with CVS means that they
-didn't get supressed).  Fixing it would be nice though.}
+didn't get suppressed).  Fixing it would be nice though.}
 
 @subsubheading Create compressed versions of the release
 
diff --git a/gdb/doc/observer.texi b/gdb/doc/observer.texi
index b9d577779da..cff8faa980a 100644
--- a/gdb/doc/observer.texi
+++ b/gdb/doc/observer.texi
@@ -74,7 +74,7 @@ The following interfaces are available to manage observers:
 
 @deftypefun extern struct observer *observer_attach_@var{event} (observer_@var{event}_ftype *@var{f})
 Using the function @var{f}, create an observer that is notified when
-ever @var{event} occures, return the observer.
+ever @var{event} occurs, return the observer.
 @end deftypefun
 
 @deftypefun extern void observer_detach_@var{event} (struct observer *@var{observer});
diff --git a/gdb/doc/stabs.texinfo b/gdb/doc/stabs.texinfo
index 963fc3b76d8..0bc0219b319 100644
--- a/gdb/doc/stabs.texinfo
+++ b/gdb/doc/stabs.texinfo
@@ -1069,7 +1069,7 @@ start of the relevant section for that compilation unit.  SunPRO has
 plans to have the linker stop relocating stabs; I suspect that their the
 debugger gets the address from the corresponding ELF (not stab) symbol.
 I'm not sure how to find which symbol of that name is the right one.
-The clean way to do all this would be to have a the value of a symbol
+The clean way to do all this would be to have the value of a symbol
 descriptor @samp{S} symbol be an offset relative to the start of the
 file, just like everything else, but that introduces obvious
 compatibility problems.  For more information on linker stab relocation,