From: Paul Koning <ni1d@arrl.net>
Date: Fri, 5 Oct 2018 17:37:56 +0000 (-0400)
Subject: Remove -mfloat32, -mfloat64 switches from pdp11 target.
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=d5a9895595c126a5fa8b41c222f330908c3a7e72;p=gcc.git

Remove -mfloat32, -mfloat64 switches from pdp11 target.

    * config/pdp11/pdp11.h (FLOAT_TYPE_SIZE): Always 32.
    * config/pdp11/pdp11.opt (mfloat32): Remove.
    (mfloat64): Remove.
    * doc/invoke.texi (pdp11 -mfloat32): Remove:
    (pdp11 -mfloat64): Remove.

From-SVN: r264881
---

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 3451e7bae25..3ca3c1c28b6 100644
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,11 @@
+2018-10-05  Paul Koning  <ni1d@arrl.net>
+
+	* config/pdp11/pdp11.h (FLOAT_TYPE_SIZE): Always 32.
+	* config/pdp11/pdp11.opt (mfloat32): Remove.
+	(mfloat64): Remove.
+	* doc/invoke.texi (pdp11 -mfloat32): Remove:
+	(pdp11 -mfloat64): Remove.
+
 2018-10-05  Uros Bizjak  <ubizjak@gmail.com>
 
 	* config/i386/i386.md (*cmpxf_i387): Change operand 2 predicate
diff --git a/gcc/config/pdp11/pdp11.h b/gcc/config/pdp11/pdp11.h
index f4c91863b7a..c68a74d91a0 100644
--- a/gcc/config/pdp11/pdp11.h
+++ b/gcc/config/pdp11/pdp11.h
@@ -59,12 +59,14 @@ along with GCC; see the file COPYING3.  If not see
 #define LONG_TYPE_SIZE		32
 #define LONG_LONG_TYPE_SIZE	64     
 
-/* if we set FLOAT_TYPE_SIZE to 32, we could have the benefit 
-   of saving core for huge arrays - the definitions are 
-   already in md - but floats can never reside in 
-   an FPU register - we keep the FPU in double float mode 
-   all the time !! */
-#define FLOAT_TYPE_SIZE		(TARGET_FLOAT32 ? 32 : 64)
+/* In earlier versions, FLOAT_TYPE_SIZE was selectable as 32 or 64,
+   but that conflicts with Fortran language rules.  Since there is no
+   obvious reason why we should have that feature -- other targets
+   generally don't have float and double the same size -- I've removed
+   it.  Note that it continues to be true (for now) that arithmetic is
+   always done with 64-bit values, i.e., the FPU is always in "double"
+   mode.  */
+#define FLOAT_TYPE_SIZE		32
 #define DOUBLE_TYPE_SIZE	64
 #define LONG_DOUBLE_TYPE_SIZE	64
 
@@ -200,12 +202,11 @@ extern const struct real_format pdp11_d_format;
 
 MUL_REGS are used for odd numbered regs, to use in 16-bit multiplication
          (even numbered do 32-bit multiply)
-LMUL_REGS long multiply registers (even numbered regs )
-	  (don't need them, all 32-bit regs are even numbered!)
 GENERAL_REGS is all cpu
 LOAD_FPU_REGS is the first four cpu regs, they are easier to load
 NO_LOAD_FPU_REGS is ac4 and ac5, currently - difficult to load them
 FPU_REGS is all fpu regs 
+CC_REGS is the condition codes (CPU and FPU)
 */
 
 enum reg_class
diff --git a/gcc/config/pdp11/pdp11.opt b/gcc/config/pdp11/pdp11.opt
index 033d1d7403e..5da3b39569c 100644
--- a/gcc/config/pdp11/pdp11.opt
+++ b/gcc/config/pdp11/pdp11.opt
@@ -42,14 +42,6 @@ mgnu-asm
 Target RejectNegative Report Mask(GNU_ASM) Negative(munix-asm)
 Use the GNU assembler syntax.
 
-mfloat32
-Target Report Mask(FLOAT32)
-Use 32 bit float.
-
-mfloat64
-Target Report InverseMask(FLOAT32, FLOAT64)
-Use 64 bit float.
-
 mfpu
 Target RejectNegative Report Mask(FPU)
 Use hardware floating point.
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 89c2eda58c4..802cc642453 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -1007,7 +1007,6 @@ Objective-C and Objective-C++ Dialects}.
 @emph{PDP-11 Options}
 @gccoptlist{-mfpu  -msoft-float  -mac0  -mno-ac0  -m40  -m45  -m10 @gol
 -mint32  -mno-int16 -mint16  -mno-int32 @gol
--mfloat32  -mno-float64 -mfloat64  -mno-float32 @gol
 -msplit -munix-asm  -mdec-asm -mgnu-asm -mlra}
 
 @emph{picoChip Options}
@@ -22722,18 +22721,6 @@ Use 16-bit @code{int}.  This is the default.
 @opindex mno-int16
 Use 32-bit @code{int}.
 
-@item -mfloat64
-@itemx -mno-float32
-@opindex mfloat64
-@opindex mno-float32
-Use 64-bit @code{float}.  This is the default.
-
-@item -mfloat32
-@itemx -mno-float64
-@opindex mfloat32
-@opindex mno-float64
-Use 32-bit @code{float}.
-
 @item -msplit
 @opindex msplit
 Target has split instruction and data space.  Implies -m45.