From: Peter Korsgaard Date: Mon, 29 Mar 2010 09:29:30 +0000 (+0200) Subject: busybox: bump 1.16.x stable version X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=daf938aa6675a611205e15c751cbcaa71e3e40a1;p=buildroot.git busybox: bump 1.16.x stable version Signed-off-by: Peter Korsgaard --- diff --git a/package/busybox/Config.in b/package/busybox/Config.in index 95e9cc58fe..514e022005 100644 --- a/package/busybox/Config.in +++ b/package/busybox/Config.in @@ -46,7 +46,7 @@ config BR2_BUSYBOX_VERSION default "1.13.4" if BR2_BUSYBOX_VERSION_1_13_X default "1.14.4" if BR2_BUSYBOX_VERSION_1_14_X default "1.15.3" if BR2_BUSYBOX_VERSION_1_15_X - default "1.16.0" if BR2_BUSYBOX_VERSION_1_16_X + default "1.16.1" if BR2_BUSYBOX_VERSION_1_16_X config BR2_PACKAGE_BUSYBOX_FULLINSTALL bool "Run BusyBox's own full installation" diff --git a/package/busybox/busybox-1.16.0-POLLHUP.patch b/package/busybox/busybox-1.16.0-POLLHUP.patch deleted file mode 100644 index 04ceb1610c..0000000000 --- a/package/busybox/busybox-1.16.0-POLLHUP.patch +++ /dev/null @@ -1,93 +0,0 @@ -diff -urpN busybox-1.16.0/miscutils/microcom.c busybox-1.16.0-POLLHUP/miscutils/microcom.c ---- busybox-1.16.0/miscutils/microcom.c 2010-03-08 22:49:23.000000000 +0100 -+++ busybox-1.16.0-POLLHUP/miscutils/microcom.c 2010-03-08 22:50:34.000000000 +0100 -@@ -119,7 +119,7 @@ int microcom_main(int argc UNUSED_PARAM, - nfd = 2; - // Not safe_poll: we want to exit on signal - while (!bb_got_signal && poll(pfd, nfd, timeout) > 0) { -- if (nfd > 1 && (pfd[1].revents & POLLIN)) { -+ if (nfd > 1 && pfd[1].revents) { - char c; - // read from stdin -> write to device - if (safe_read(STDIN_FILENO, &c, 1) < 1) { -@@ -143,7 +143,7 @@ int microcom_main(int argc UNUSED_PARAM, - safe_poll(pfd, 1, delay); - skip_write: ; - } -- if (pfd[0].revents & POLLIN) { -+ if (pfd[0].revents) { - #define iobuf bb_common_bufsiz1 - ssize_t len; - // read from device -> write to stdout -diff -urpN busybox-1.16.0/networking/httpd.c busybox-1.16.0-POLLHUP/networking/httpd.c ---- busybox-1.16.0/networking/httpd.c 2010-03-08 22:49:32.000000000 +0100 -+++ busybox-1.16.0-POLLHUP/networking/httpd.c 2010-03-08 22:50:39.000000000 +0100 -@@ -1167,7 +1167,7 @@ static NOINLINE void cgi_io_loop_and_exi - break; - } - -- if (pfd[TO_CGI].revents & POLLOUT) { -+ if (pfd[TO_CGI].revents) { - /* hdr_cnt > 0 here due to the way pfd[TO_CGI].events set */ - /* Have data from peer and can write to CGI */ - count = safe_write(toCgi_wr, hdr_ptr, hdr_cnt); -@@ -1184,7 +1184,7 @@ static NOINLINE void cgi_io_loop_and_exi - } - } - -- if (pfd[0].revents & POLLIN) { -+ if (pfd[0].revents) { - /* post_len > 0 && hdr_cnt == 0 here */ - /* We expect data, prev data portion is eaten by CGI - * and there *is* data to read from the peer -@@ -1202,7 +1202,7 @@ static NOINLINE void cgi_io_loop_and_exi - } - } - -- if (pfd[FROM_CGI].revents & POLLIN) { -+ if (pfd[FROM_CGI].revents) { - /* There is something to read from CGI */ - char *rbuf = iobuf; - -diff -urpN busybox-1.16.0/networking/telnet.c busybox-1.16.0-POLLHUP/networking/telnet.c ---- busybox-1.16.0/networking/telnet.c 2010-03-08 22:49:32.000000000 +0100 -+++ busybox-1.16.0-POLLHUP/networking/telnet.c 2010-03-08 22:50:38.000000000 +0100 -@@ -618,7 +618,7 @@ int telnet_main(int argc UNUSED_PARAM, c - default: - - #ifdef USE_POLL -- if (ufds[0].revents & POLLIN) -+ if (ufds[0].revents) - #else - if (FD_ISSET(STDIN_FILENO, &rfds)) - #endif -@@ -631,7 +631,7 @@ int telnet_main(int argc UNUSED_PARAM, c - } - - #ifdef USE_POLL -- if (ufds[1].revents & POLLIN) -+ if (ufds[1].revents) - #else - if (FD_ISSET(netfd, &rfds)) - #endif -diff -urpN busybox-1.16.0/util-linux/script.c busybox-1.16.0-POLLHUP/util-linux/script.c ---- busybox-1.16.0/util-linux/script.c 2010-03-08 22:49:23.000000000 +0100 -+++ busybox-1.16.0-POLLHUP/util-linux/script.c 2010-03-08 22:50:34.000000000 +0100 -@@ -119,7 +119,7 @@ int script_main(int argc UNUSED_PARAM, c - * for example, try "script -c true" */ - break; - } -- if (pfd[0].revents & POLLIN) { -+ if (pfd[0].revents) { - errno = 0; - count = safe_read(pty, buf, sizeof(buf)); - if (count <= 0 && errno != EAGAIN) { -@@ -143,7 +143,7 @@ int script_main(int argc UNUSED_PARAM, c - } - } - } -- if (pfd[1].revents & POLLIN) { -+ if (pfd[1].revents) { - count = safe_read(STDIN_FILENO, buf, sizeof(buf)); - if (count <= 0) { - /* err/eof from stdin: don't read stdin anymore */ diff --git a/package/busybox/busybox-1.16.0-ash.patch b/package/busybox/busybox-1.16.0-ash.patch deleted file mode 100644 index 490cf83dff..0000000000 --- a/package/busybox/busybox-1.16.0-ash.patch +++ /dev/null @@ -1,35 +0,0 @@ -diff -urpN busybox-1.16.0/shell/ash.c busybox-1.16.0-ash/shell/ash.c ---- busybox-1.16.0/shell/ash.c 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-ash/shell/ash.c 2010-02-21 01:52:22.000000000 +0100 -@@ -4539,7 +4539,7 @@ forkchild(struct job *jp, union node *n, - if (mode == FORK_NOJOB /* is it `xxx` ? */ - && n && n->type == NCMD /* is it single cmd? */ - /* && n->ncmd.args->type == NARG - always true? */ -- && strcmp(n->ncmd.args->narg.text, "trap") == 0 -+ && n->ncmd.args && strcmp(n->ncmd.args->narg.text, "trap") == 0 - && n->ncmd.args->narg.next == NULL /* "trap" with no arguments */ - /* && n->ncmd.args->narg.backquote == NULL - do we need to check this? */ - ) { -@@ -4627,7 +4627,7 @@ forkchild(struct job *jp, union node *n, - } - #if JOBS - if (n && n->type == NCMD -- && strcmp(n->ncmd.args->narg.text, "jobs") == 0 -+ && n->ncmd.args && strcmp(n->ncmd.args->narg.text, "jobs") == 0 - ) { - TRACE(("Job hack\n")); - /* "jobs": we do not want to clear job list for it, -diff -urpN busybox-1.16.0/shell/ash_test/ash-misc/nulltick1.right busybox-1.16.0-ash/shell/ash_test/ash-misc/nulltick1.right ---- busybox-1.16.0/shell/ash_test/ash-misc/nulltick1.right 1970-01-01 01:00:00.000000000 +0100 -+++ busybox-1.16.0-ash/shell/ash_test/ash-misc/nulltick1.right 2010-02-21 01:52:22.000000000 +0100 -@@ -0,0 +1,3 @@ -+Test 1 -+Test 2 -+Done -diff -urpN busybox-1.16.0/shell/ash_test/ash-misc/nulltick1.tests busybox-1.16.0-ash/shell/ash_test/ash-misc/nulltick1.tests ---- busybox-1.16.0/shell/ash_test/ash-misc/nulltick1.tests 1970-01-01 01:00:00.000000000 +0100 -+++ busybox-1.16.0-ash/shell/ash_test/ash-misc/nulltick1.tests 2010-02-21 01:52:22.000000000 +0100 -@@ -0,0 +1,3 @@ -+echo Test ` ` 1 -+echo Test `> 1; - if (l > i) { - const int t = list[c[l]].y; -@@ -265,11 +267,13 @@ static void stone(const int *a, int n, c - int clistlen = 100; - int k = 0; - struct cand *clist = xzalloc(clistlen * sizeof(clist[0])); -+ struct cand cand; -+ struct cand *q; - int *klist = xzalloc((n + 2) * sizeof(klist[0])); - /*clist[0] = (struct cand){0}; - xzalloc did it */ - /*klist[0] = 0; */ - -- for (struct cand cand = {1}; cand.x <= n; cand.x++) { -+ for (cand.x = 1; cand.x <= n; cand.x++) { - int j = a[cand.x], oldl = 0; - unsigned numtries = 0; - if (j == 0) -@@ -303,7 +307,7 @@ static void stone(const int *a, int n, c - } while ((cand.y = b[++j]) > 0 && numtries < bound); - } - /* Unravel */ -- for (struct cand *q = clist + klist[k]; q->y; q = clist + q->pred) -+ for (q = clist + klist[k]; q->y; q = clist + q->pred) - J[q->x + pref] = q->y + pref; - free(klist); - free(clist); -@@ -348,10 +352,11 @@ static void equiv(struct line *a, int n, - - static void unsort(const struct line *f, int l, int *b) - { -+ int i; - int *a = xmalloc((l + 1) * sizeof(a[0])); -- for (int i = 1; i <= l; i++) -+ for (i = 1; i <= l; i++) - a[f[i].serial] = f[i].value; -- for (int i = 1; i <= l; i++) -+ for (i = 1; i <= l; i++) - b[i] = a[i]; - free(a); - } -@@ -370,12 +375,13 @@ static int line_compar(const void *a, co - - static void fetch(FILE_and_pos_t *ft, const off_t *ix, int a, int b, int ch) - { -- for (int i = a; i <= b; i++) { -+ int i, j, col; -+ for (i = a; i <= b; i++) { - seek_ft(ft, ix[i - 1]); - putchar(ch); - if (option_mask32 & FLAG(T)) - putchar('\t'); -- for (int j = 0, col = 0; j < ix[i] - ix[i - 1]; j++) { -+ for (j = 0, col = 0; j < ix[i] - ix[i - 1]; j++) { - int c = fgetc(ft->ft_fp); - if (c == EOF) { - printf("\n\\ No newline at end of file\n"); -@@ -410,19 +416,20 @@ static NOINLINE int *create_J(FILE_and_p - { - int *J, slen[2], *class, *member; - struct line *nfile[2], *sfile[2]; -- int pref = 0, suff = 0; -+ int pref = 0, suff = 0, i, j, delta; - - /* Lines of both files are hashed, and in the process - * their offsets are stored in the array ix[fileno] - * where fileno == 0 points to the old file, and - * fileno == 1 points to the new one. - */ -- for (int i = 0; i < 2; i++) { -+ for (i = 0; i < 2; i++) { - unsigned hash; - token_t tok; - size_t sz = 100; - nfile[i] = xmalloc((sz + 3) * sizeof(nfile[i][0])); - /* ft gets here without the correct position, cant use seek_ft */ -+ ft[i].ft_pos = 0; - fseeko(ft[i].ft_fp, 0, SEEK_SET); - - nlen[i] = 0; -@@ -460,11 +467,11 @@ start: - nlen[i]--; - /* Now we copy the line offsets into ix */ - ix[i] = xmalloc((nlen[i] + 2) * sizeof(ix[i][0])); -- for (int j = 0; j < nlen[i] + 1; j++) -+ for (j = 0; j < nlen[i] + 1; j++) - ix[i][j] = nfile[i][j].offset; - } - -- /* lenght of prefix and suffix is calculated */ -+ /* length of prefix and suffix is calculated */ - for (; pref < nlen[0] && pref < nlen[1] && - nfile[0][pref + 1].value == nfile[1][pref + 1].value; - pref++); -@@ -475,10 +482,10 @@ start: - * the result being sorted and stored in sfile[fileno], - * and their sizes are stored in slen[fileno] - */ -- for (int j = 0; j < 2; j++) { -+ for (j = 0; j < 2; j++) { - sfile[j] = nfile[j] + pref; - slen[j] = nlen[j] - pref - suff; -- for (int i = 0; i <= slen[j]; i++) -+ for (i = 0; i <= slen[j]; i++) - sfile[j][i].serial = i; - qsort(sfile[j] + 1, slen[j], sizeof(*sfile[j]), line_compar); - } -@@ -494,7 +501,7 @@ start: - free(nfile[1]); - - class = xmalloc((slen[0] + 1) * sizeof(class[0])); -- for (int i = 1; i <= slen[0]; i++) /* Unsorting */ -+ for (i = 1; i <= slen[0]; i++) /* Unsorting */ - class[sfile[0][i].serial] = sfile[0][i].value; - free(nfile[0]); - #else -@@ -512,7 +519,7 @@ start: - * are initialized with 0 (no matches), so that function stone can - * then assign them their right values - */ -- for (int i = 0, delta = nlen[1] - nlen[0]; i <= nlen[0]; i++) -+ for (i = 0, delta = nlen[1] - nlen[0]; i <= nlen[0]; i++) - J[i] = i <= pref ? i : - i > (nlen[0] - suff) ? (i + delta) : 0; - /* Here the magic is performed */ -@@ -526,14 +533,14 @@ start: - * which, due to limitations intrinsic to any hashing algorithm, - * are different but ended up confounded as the same - */ -- for (int i = 1; i <= nlen[0]; i++) { -+ for (i = 1; i <= nlen[0]; i++) { - if (!J[i]) - continue; - - seek_ft(&ft[0], ix[0][i - 1]); - seek_ft(&ft[1], ix[1][J[i] - 1]); - -- for (int j = J[i]; i <= nlen[0] && J[i] == j; i++, j++) { -+ for (j = J[i]; i <= nlen[0] && J[i] == j; i++, j++) { - token_t tok0 = 0, tok1 = 0; - do { - tok0 = read_token(&ft[0], tok0); -@@ -555,13 +562,18 @@ static bool diff(FILE* fp[2], char *file - { - int nlen[2]; - off_t *ix[2]; -- FILE_and_pos_t ft[2] = { { fp[0] }, { fp[1] } }; -- int *J = create_J(ft, nlen, ix); -- -- bool anychange = false; -+ FILE_and_pos_t ft[2]; - typedef struct { int a, b; } vec_t[2]; - vec_t *vec = NULL; -- int i = 1, idx = -1; -+ int i = 1, j, k, idx = -1; -+ bool anychange = false; -+ int *J; -+ -+ ft[0].ft_fp = fp[0]; -+ ft[1].ft_fp = fp[1]; -+ /* note that ft[i].ft_pos is unintitalized, create_J() -+ * must not assume otherwise */ -+ J = create_J(ft, nlen, ix); - - do { - bool nonempty = false; -@@ -596,8 +608,8 @@ static bool diff(FILE* fp[2], char *file - break; - } - -- for (int j = 0; j < 2; j++) -- for (int k = v[j].a; k < v[j].b; k++) -+ for (j = 0; j < 2; j++) -+ for (k = v[j].a; k < v[j].b; k++) - nonempty |= (ix[j][k+1] - ix[j][k] != 1); - - vec = xrealloc_vector(vec, 6, ++idx); -@@ -612,6 +624,7 @@ static bool diff(FILE* fp[2], char *file - if (idx < 0 || ((option_mask32 & FLAG(B)) && !nonempty)) - goto cont; - if (!(option_mask32 & FLAG(q))) { -+ int lowa; - vec_t span, *cvp = vec; - - if (!anychange) { -@@ -621,7 +634,7 @@ static bool diff(FILE* fp[2], char *file - } - - printf("@@"); -- for (int j = 0; j < 2; j++) { -+ for (j = 0; j < 2; j++) { - int a = span[j].a = MAX(1, (*cvp)[j].a - opt_U_context); - int b = span[j].b = MIN(nlen[j], vec[idx][j].b + opt_U_context); - -@@ -635,12 +648,12 @@ static bool diff(FILE* fp[2], char *file - * Output changes in "unified" diff format--the old and new lines - * are printed together. - */ -- for (int lowa = span[0].a; ; lowa = (*cvp++)[0].b + 1) { -+ for (lowa = span[0].a; ; lowa = (*cvp++)[0].b + 1) { - bool end = cvp > &vec[idx]; - fetch(&ft[0], ix[0], lowa, end ? span[0].b : (*cvp)[0].a - 1, ' '); - if (end) - break; -- for (int j = 0; j < 2; j++) -+ for (j = 0; j < 2; j++) - fetch(&ft[j], ix[j], (*cvp)[j].a, (*cvp)[j].b, j ? '+' : '-'); - } - } -@@ -660,9 +673,9 @@ static int diffreg(char *file[2]) - { - FILE *fp[2] = { stdin, stdin }; - bool binary = false, differ = false; -- int status = STATUS_SAME; -+ int status = STATUS_SAME, i; - -- for (int i = 0; i < 2; i++) { -+ for (i = 0; i < 2; i++) { - int fd = open_or_warn_stdin(file[i]); - if (fd == -1) - goto out; -@@ -688,7 +701,7 @@ static int diffreg(char *file[2]) - const size_t sz = COMMON_BUFSIZE / 2; - char *const buf0 = bb_common_bufsiz1; - char *const buf1 = buf0 + sz; -- int i, j; -+ int j, k; - i = fread(buf0, 1, sz, fp[0]); - j = fread(buf1, 1, sz, fp[1]); - if (i != j) { -@@ -697,7 +710,7 @@ static int diffreg(char *file[2]) - } - if (i == 0) - break; -- for (int k = 0; k < i; k++) { -+ for (k = 0; k < i; k++) { - if (!buf0[k] || !buf1[k]) - binary = true; - if (buf0[k] != buf1[k]) -@@ -771,9 +784,10 @@ static int FAST_FUNC skip_dir(const char - static void diffdir(char *p[2], const char *s_start) - { - struct dlist list[2]; -+ int i; - - memset(&list, 0, sizeof(list)); -- for (int i = 0; i < 2; i++) { -+ for (i = 0; i < 2; i++) { - /*list[i].s = list[i].e = 0; - memset did it */ - /*list[i].dl = NULL; */ - -@@ -815,7 +829,7 @@ static void diffdir(char *p[2], const ch - else { - char *fullpath[2], *path[2]; /* if -N */ - -- for (int i = 0; i < 2; i++) { -+ for (i = 0; i < 2; i++) { - if (pos == 0 || i == k) { - path[i] = fullpath[i] = concat_path_file(p[i], dp[i]); - stat(fullpath[i], &stb[i]); -@@ -883,7 +897,7 @@ static const char diff_longopts[] ALIGN1 - int diff_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; - int diff_main(int argc UNUSED_PARAM, char **argv) - { -- int gotstdin = 0; -+ int gotstdin = 0, i; - char *file[2], *s_start = NULL; - llist_t *L_arg = NULL; - -@@ -900,7 +914,7 @@ int diff_main(int argc UNUSED_PARAM, cha - while (L_arg) - label[!!label[0]] = llist_pop(&L_arg); - xfunc_error_retval = 2; -- for (int i = 0; i < 2; i++) { -+ for (i = 0; i < 2; i++) { - file[i] = argv[i]; - /* Compat: "diff file name_which_doesnt_exist" exits with 2 */ - if (LONE_DASH(file[i])) { -diff -urpN busybox-1.16.0/miscutils/fbsplash.c busybox-1.16.0-compat/miscutils/fbsplash.c ---- busybox-1.16.0/miscutils/fbsplash.c 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-compat/miscutils/fbsplash.c 2010-02-21 01:54:07.000000000 +0100 -@@ -301,7 +301,7 @@ static void fb_drawimage(void) - */ - static void init(const char *cfg_filename) - { -- static const char const param_names[] ALIGN1 = -+ static const char param_names[] ALIGN1 = - "BAR_WIDTH\0" "BAR_HEIGHT\0" - "BAR_LEFT\0" "BAR_TOP\0" - "BAR_R\0" "BAR_G\0" "BAR_B\0" diff --git a/package/busybox/busybox-1.16.0-defconfig.patch b/package/busybox/busybox-1.16.0-defconfig.patch deleted file mode 100644 index c053526ede..0000000000 --- a/package/busybox/busybox-1.16.0-defconfig.patch +++ /dev/null @@ -1,438 +0,0 @@ -diff -urpN busybox-1.16.0/scripts/defconfig busybox-1.16.0-defconfig/scripts/defconfig ---- busybox-1.16.0/scripts/defconfig 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-defconfig/scripts/defconfig 2010-02-21 01:53:15.000000000 +0100 -@@ -1,7 +1,7 @@ - # - # Automatically generated make config: don't edit --# Busybox version: 1.15.0.svn --# Fri Aug 21 00:14:11 2009 -+# Busybox version: 1.16.0 -+# Wed Jan 27 20:00:00 2010 - # - CONFIG_HAVE_DOT_CONFIG=y - -@@ -14,6 +14,8 @@ CONFIG_HAVE_DOT_CONFIG=y - # - # CONFIG_DESKTOP is not set - # CONFIG_EXTRA_COMPAT is not set -+CONFIG_INCLUDE_SUSv2=y -+# CONFIG_USE_PORTABLE_CODE is not set - CONFIG_FEATURE_BUFFERS_USE_MALLOC=y - # CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set - # CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set -@@ -22,7 +24,7 @@ CONFIG_FEATURE_VERBOSE_USAGE=y - CONFIG_FEATURE_COMPRESS_USAGE=y - CONFIG_FEATURE_INSTALLER=y - CONFIG_LOCALE_SUPPORT=y --# CONFIG_FEATURE_ASSUME_UNICODE is not set -+CONFIG_FEATURE_ASSUME_UNICODE=y - # CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set - CONFIG_LONG_OPTS=y - CONFIG_FEATURE_DEVPTS=y -@@ -59,7 +61,6 @@ CONFIG_EXTRA_CFLAGS="" - CONFIG_NO_DEBUG_LIB=y - # CONFIG_DMALLOC is not set - # CONFIG_EFENCE is not set --CONFIG_INCLUDE_SUSv2=y - - # - # Installation Options -@@ -120,10 +121,11 @@ CONFIG_FEATURE_CPIO_P=y - # CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set - CONFIG_GUNZIP=y - CONFIG_GZIP=y -+CONFIG_FEATURE_GZIP_LONG_OPTIONS=y - CONFIG_LZOP=y - # CONFIG_LZOP_COMPR_HIGH is not set --# CONFIG_RPM2CPIO is not set --# CONFIG_RPM is not set -+CONFIG_RPM2CPIO=y -+CONFIG_RPM=y - CONFIG_TAR=y - CONFIG_FEATURE_TAR_CREATE=y - CONFIG_FEATURE_TAR_AUTODETECT=y -@@ -133,6 +135,7 @@ CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY= - CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y - CONFIG_FEATURE_TAR_LONG_OPTIONS=y - CONFIG_FEATURE_TAR_UNAME_GNAME=y -+CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y - CONFIG_UNCOMPRESS=y - CONFIG_UNLZMA=y - CONFIG_FEATURE_LZMA_FAST=y -@@ -148,15 +151,19 @@ CONFIG_CATV=y - CONFIG_CHGRP=y - CONFIG_CHMOD=y - CONFIG_CHOWN=y -+CONFIG_FEATURE_CHOWN_LONG_OPTIONS=y - CONFIG_CHROOT=y - CONFIG_CKSUM=y - CONFIG_COMM=y - CONFIG_CP=y -+CONFIG_FEATURE_CP_LONG_OPTIONS=y - CONFIG_CUT=y - CONFIG_DATE=y - CONFIG_FEATURE_DATE_ISOFMT=y -+CONFIG_FEATURE_DATE_COMPAT=y - CONFIG_DD=y - CONFIG_FEATURE_DD_SIGNAL_HANDLING=y -+CONFIG_FEATURE_DD_THIRD_STATUS_LINE=y - CONFIG_FEATURE_DD_IBS_OBS=y - CONFIG_DF=y - CONFIG_FEATURE_DF_FANCY=y -@@ -271,7 +278,7 @@ CONFIG_FEATURE_AUTOWIDTH=y - CONFIG_FEATURE_HUMAN_READABLE=y - - # --# Common options for md5sum, sha1sum -+# Common options for md5sum, sha1sum, sha256sum, sha512sum - # - CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y - -@@ -318,9 +325,8 @@ CONFIG_AWK=y - CONFIG_FEATURE_AWK_LIBM=y - CONFIG_CMP=y - CONFIG_DIFF=y --CONFIG_FEATURE_DIFF_BINARY=y -+CONFIG_FEATURE_DIFF_LONG_OPTIONS=y - CONFIG_FEATURE_DIFF_DIR=y --CONFIG_FEATURE_DIFF_MINIMAL=y - CONFIG_ED=y - CONFIG_PATCH=y - CONFIG_SED=y -@@ -364,6 +370,7 @@ CONFIG_FEATURE_FIND_DELETE=y - CONFIG_FEATURE_FIND_PATH=y - CONFIG_FEATURE_FIND_REGEX=y - # CONFIG_FEATURE_FIND_CONTEXT is not set -+CONFIG_FEATURE_FIND_LINKS=y - CONFIG_GREP=y - CONFIG_FEATURE_GREP_EGREP_ALIAS=y - CONFIG_FEATURE_GREP_FGREP_ALIAS=y -@@ -453,6 +460,7 @@ CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALRE - # Options common to multiple modutils - # - # CONFIG_FEATURE_2_4_MODULES is not set -+# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set - # CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set - # CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set - # CONFIG_FEATURE_INSMOD_LOADINKMEM is not set -@@ -467,8 +475,8 @@ CONFIG_DEFAULT_DEPMOD_FILE="modules.dep" - # - # Linux System Utilities - # --# CONFIG_ACPID is not set --# CONFIG_FEATURE_ACPID_COMPAT is not set -+CONFIG_ACPID=y -+CONFIG_FEATURE_ACPID_COMPAT=y - CONFIG_BLKID=y - CONFIG_DMESG=y - CONFIG_FEATURE_DMESG_PRETTY=y -@@ -488,12 +496,14 @@ CONFIG_FEATURE_FDISK_ADVANCED=y - CONFIG_FINDFS=y - CONFIG_FREERAMDISK=y - CONFIG_FSCK_MINIX=y -+CONFIG_MKFS_EXT2=y - CONFIG_MKFS_MINIX=y - - # - # Minix filesystem support - # - CONFIG_FEATURE_MINIX2=y -+# CONFIG_MKFS_REISER is not set - CONFIG_MKFS_VFAT=y - CONFIG_GETOPT=y - CONFIG_FEATURE_GETOPT_LONG=y -@@ -506,6 +516,8 @@ CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y - CONFIG_IPCRM=y - CONFIG_IPCS=y - CONFIG_LOSETUP=y -+CONFIG_LSPCI=y -+CONFIG_LSUSB=y - CONFIG_MDEV=y - CONFIG_FEATURE_MDEV_CONF=y - CONFIG_FEATURE_MDEV_RENAME=y -@@ -518,6 +530,7 @@ CONFIG_MORE=y - CONFIG_FEATURE_USE_TERMIOS=y - CONFIG_VOLUMEID=y - CONFIG_FEATURE_VOLUMEID_EXT=y -+CONFIG_FEATURE_VOLUMEID_BTRFS=y - CONFIG_FEATURE_VOLUMEID_REISERFS=y - CONFIG_FEATURE_VOLUMEID_FAT=y - CONFIG_FEATURE_VOLUMEID_HFS=y -@@ -595,11 +608,12 @@ CONFIG_DEVMEM=y - CONFIG_EJECT=y - CONFIG_FEATURE_EJECT_SCSI=y - CONFIG_FBSPLASH=y --# CONFIG_FLASH_LOCK is not set --# CONFIG_FLASH_UNLOCK is not set --# CONFIG_FLASH_ERASEALL is not set -+CONFIG_FLASHCP=y -+CONFIG_FLASH_LOCK=y -+CONFIG_FLASH_UNLOCK=y -+CONFIG_FLASH_ERASEALL=y - CONFIG_IONICE=y --# CONFIG_INOTIFYD is not set -+CONFIG_INOTIFYD=y - CONFIG_LAST=y - # CONFIG_FEATURE_LAST_SMALL is not set - CONFIG_FEATURE_LAST_FANCY=y -@@ -632,8 +646,8 @@ CONFIG_RUNLEVEL=y - CONFIG_RX=y - CONFIG_SETSID=y - CONFIG_STRINGS=y --# CONFIG_TASKSET is not set --# CONFIG_FEATURE_TASKSET_FANCY is not set -+CONFIG_TASKSET=y -+CONFIG_FEATURE_TASKSET_FANCY=y - CONFIG_TIME=y - CONFIG_TIMEOUT=y - CONFIG_TTYSIZE=y -@@ -658,6 +672,7 @@ CONFIG_ETHER_WAKE=y - CONFIG_FAKEIDENTD=y - CONFIG_FTPD=y - CONFIG_FEATURE_FTP_WRITE=y -+CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y - CONFIG_FTPGET=y - CONFIG_FTPPUT=y - CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y -@@ -723,6 +738,8 @@ CONFIG_NETSTAT=y - CONFIG_FEATURE_NETSTAT_WIDE=y - CONFIG_FEATURE_NETSTAT_PRG=y - CONFIG_NSLOOKUP=y -+CONFIG_NTPD=y -+CONFIG_FEATURE_NTPD_SERVER=y - CONFIG_PING=y - CONFIG_PING6=y - CONFIG_FEATURE_FANCY_PING=y -@@ -734,13 +751,16 @@ CONFIG_FEATURE_TELNET_TTYPE=y - CONFIG_FEATURE_TELNET_AUTOLOGIN=y - CONFIG_TELNETD=y - CONFIG_FEATURE_TELNETD_STANDALONE=y -+CONFIG_FEATURE_TELNETD_INETD_WAIT=y - CONFIG_TFTP=y - CONFIG_TFTPD=y - CONFIG_FEATURE_TFTP_GET=y - CONFIG_FEATURE_TFTP_PUT=y - CONFIG_FEATURE_TFTP_BLOCKSIZE=y -+CONFIG_FEATURE_TFTP_PROGRESS_BAR=y - # CONFIG_TFTP_DEBUG is not set - CONFIG_TRACEROUTE=y -+CONFIG_TRACEROUTE6=y - CONFIG_FEATURE_TRACEROUTE_VERBOSE=y - # CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set - # CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set -@@ -814,6 +834,7 @@ CONFIG_FEATURE_TOP_SMP_CPU=y - CONFIG_FEATURE_TOP_DECIMALS=y - CONFIG_FEATURE_TOP_SMP_PROCESS=y - CONFIG_FEATURE_TOPMEM=y -+CONFIG_FEATURE_SHOW_THREADS=y - CONFIG_UPTIME=y - CONFIG_WATCH=y - -@@ -878,6 +899,7 @@ CONFIG_HUSH_CASE=y - CONFIG_HUSH_FUNCTIONS=y - CONFIG_HUSH_LOCAL=y - CONFIG_HUSH_EXPORT_N=y -+CONFIG_HUSH_RANDOM_SUPPORT=y - # CONFIG_LASH is not set - CONFIG_MSH=y - CONFIG_SH_MATH_SUPPORT=y -diff -urpN busybox-1.16.0/TODO_config_nommu busybox-1.16.0-defconfig/TODO_config_nommu ---- busybox-1.16.0/TODO_config_nommu 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-defconfig/TODO_config_nommu 2010-02-21 01:53:15.000000000 +0100 -@@ -1,7 +1,7 @@ - # - # Automatically generated make config: don't edit --# Busybox version: 1.15.0.svn --# Fri Aug 21 00:13:18 2009 -+# Busybox version: 1.16.0 -+# Wed Jan 27 21:01:26 2010 - # - CONFIG_HAVE_DOT_CONFIG=y - -@@ -14,6 +14,8 @@ CONFIG_HAVE_DOT_CONFIG=y - # - CONFIG_DESKTOP=y - CONFIG_EXTRA_COMPAT=y -+CONFIG_INCLUDE_SUSv2=y -+# CONFIG_USE_PORTABLE_CODE is not set - CONFIG_FEATURE_BUFFERS_USE_MALLOC=y - # CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set - # CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set -@@ -59,7 +61,6 @@ CONFIG_EXTRA_CFLAGS="" - CONFIG_NO_DEBUG_LIB=y - # CONFIG_DMALLOC is not set - # CONFIG_EFENCE is not set --CONFIG_INCLUDE_SUSv2=y - - # - # Installation Options -@@ -120,6 +121,7 @@ CONFIG_DPKG_DEB=y - CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY=y - CONFIG_GUNZIP=y - CONFIG_GZIP=y -+CONFIG_FEATURE_GZIP_LONG_OPTIONS=y - CONFIG_LZOP=y - CONFIG_LZOP_COMPR_HIGH=y - CONFIG_RPM2CPIO=y -@@ -133,6 +135,7 @@ CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY= - CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y - CONFIG_FEATURE_TAR_LONG_OPTIONS=y - CONFIG_FEATURE_TAR_UNAME_GNAME=y -+CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y - CONFIG_UNCOMPRESS=y - CONFIG_UNLZMA=y - CONFIG_FEATURE_LZMA_FAST=y -@@ -148,15 +151,19 @@ CONFIG_CATV=y - CONFIG_CHGRP=y - CONFIG_CHMOD=y - CONFIG_CHOWN=y -+CONFIG_FEATURE_CHOWN_LONG_OPTIONS=y - CONFIG_CHROOT=y - CONFIG_CKSUM=y - CONFIG_COMM=y - CONFIG_CP=y -+CONFIG_FEATURE_CP_LONG_OPTIONS=y - CONFIG_CUT=y - CONFIG_DATE=y - CONFIG_FEATURE_DATE_ISOFMT=y -+CONFIG_FEATURE_DATE_COMPAT=y - CONFIG_DD=y - CONFIG_FEATURE_DD_SIGNAL_HANDLING=y -+CONFIG_FEATURE_DD_THIRD_STATUS_LINE=y - CONFIG_FEATURE_DD_IBS_OBS=y - CONFIG_DF=y - CONFIG_FEATURE_DF_FANCY=y -@@ -271,7 +278,7 @@ CONFIG_FEATURE_AUTOWIDTH=y - CONFIG_FEATURE_HUMAN_READABLE=y - - # --# Common options for md5sum, sha1sum -+# Common options for md5sum, sha1sum, sha256sum, sha512sum - # - CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y - -@@ -318,9 +325,8 @@ CONFIG_AWK=y - CONFIG_FEATURE_AWK_LIBM=y - CONFIG_CMP=y - CONFIG_DIFF=y --CONFIG_FEATURE_DIFF_BINARY=y -+CONFIG_FEATURE_DIFF_LONG_OPTIONS=y - CONFIG_FEATURE_DIFF_DIR=y --CONFIG_FEATURE_DIFF_MINIMAL=y - CONFIG_ED=y - CONFIG_PATCH=y - CONFIG_SED=y -@@ -364,6 +370,7 @@ CONFIG_FEATURE_FIND_DELETE=y - CONFIG_FEATURE_FIND_PATH=y - CONFIG_FEATURE_FIND_REGEX=y - CONFIG_FEATURE_FIND_CONTEXT=y -+CONFIG_FEATURE_FIND_LINKS=y - CONFIG_GREP=y - CONFIG_FEATURE_GREP_EGREP_ALIAS=y - CONFIG_FEATURE_GREP_FGREP_ALIAS=y -@@ -453,6 +460,7 @@ CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALRE - # Options common to multiple modutils - # - # CONFIG_FEATURE_2_4_MODULES is not set -+CONFIG_FEATURE_INSMOD_TRY_MMAP=y - # CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set - # CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set - # CONFIG_FEATURE_INSMOD_LOADINKMEM is not set -@@ -488,12 +496,14 @@ CONFIG_FEATURE_FDISK_ADVANCED=y - CONFIG_FINDFS=y - CONFIG_FREERAMDISK=y - CONFIG_FSCK_MINIX=y -+CONFIG_MKFS_EXT2=y - CONFIG_MKFS_MINIX=y - - # - # Minix filesystem support - # - CONFIG_FEATURE_MINIX2=y -+CONFIG_MKFS_REISER=y - CONFIG_MKFS_VFAT=y - CONFIG_GETOPT=y - CONFIG_FEATURE_GETOPT_LONG=y -@@ -506,6 +516,8 @@ CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y - CONFIG_IPCRM=y - CONFIG_IPCS=y - CONFIG_LOSETUP=y -+CONFIG_LSPCI=y -+CONFIG_LSUSB=y - CONFIG_MDEV=y - CONFIG_FEATURE_MDEV_CONF=y - CONFIG_FEATURE_MDEV_RENAME=y -@@ -518,6 +530,7 @@ CONFIG_MORE=y - CONFIG_FEATURE_USE_TERMIOS=y - CONFIG_VOLUMEID=y - CONFIG_FEATURE_VOLUMEID_EXT=y -+CONFIG_FEATURE_VOLUMEID_BTRFS=y - CONFIG_FEATURE_VOLUMEID_REISERFS=y - CONFIG_FEATURE_VOLUMEID_FAT=y - CONFIG_FEATURE_VOLUMEID_HFS=y -@@ -595,6 +608,7 @@ CONFIG_DEVMEM=y - CONFIG_EJECT=y - CONFIG_FEATURE_EJECT_SCSI=y - CONFIG_FBSPLASH=y -+CONFIG_FLASHCP=y - # CONFIG_FLASH_LOCK is not set - # CONFIG_FLASH_UNLOCK is not set - # CONFIG_FLASH_ERASEALL is not set -@@ -638,6 +652,7 @@ CONFIG_TIME=y - CONFIG_TIMEOUT=y - CONFIG_TTYSIZE=y - CONFIG_VOLNAME=y -+CONFIG_WALL=y - CONFIG_WATCHDOG=y - - # -@@ -657,6 +672,7 @@ CONFIG_ETHER_WAKE=y - CONFIG_FAKEIDENTD=y - CONFIG_FTPD=y - CONFIG_FEATURE_FTP_WRITE=y -+CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y - CONFIG_FTPGET=y - CONFIG_FTPPUT=y - CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y -@@ -722,6 +738,8 @@ CONFIG_NETSTAT=y - CONFIG_FEATURE_NETSTAT_WIDE=y - CONFIG_FEATURE_NETSTAT_PRG=y - CONFIG_NSLOOKUP=y -+CONFIG_NTPD=y -+CONFIG_FEATURE_NTPD_SERVER=y - CONFIG_PING=y - CONFIG_PING6=y - CONFIG_FEATURE_FANCY_PING=y -@@ -733,13 +751,16 @@ CONFIG_FEATURE_TELNET_TTYPE=y - CONFIG_FEATURE_TELNET_AUTOLOGIN=y - CONFIG_TELNETD=y - CONFIG_FEATURE_TELNETD_STANDALONE=y -+CONFIG_FEATURE_TELNETD_INETD_WAIT=y - CONFIG_TFTP=y - CONFIG_TFTPD=y - CONFIG_FEATURE_TFTP_GET=y - CONFIG_FEATURE_TFTP_PUT=y - CONFIG_FEATURE_TFTP_BLOCKSIZE=y -+CONFIG_FEATURE_TFTP_PROGRESS_BAR=y - CONFIG_TFTP_DEBUG=y - CONFIG_TRACEROUTE=y -+CONFIG_TRACEROUTE6=y - CONFIG_FEATURE_TRACEROUTE_VERBOSE=y - CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE=y - CONFIG_FEATURE_TRACEROUTE_USE_ICMP=y -@@ -813,6 +834,7 @@ CONFIG_FEATURE_TOP_SMP_CPU=y - CONFIG_FEATURE_TOP_DECIMALS=y - CONFIG_FEATURE_TOP_SMP_PROCESS=y - CONFIG_FEATURE_TOPMEM=y -+CONFIG_FEATURE_SHOW_THREADS=y - CONFIG_UPTIME=y - CONFIG_WATCH=y - -@@ -881,6 +903,7 @@ CONFIG_HUSH_CASE=y - CONFIG_HUSH_FUNCTIONS=y - CONFIG_HUSH_LOCAL=y - CONFIG_HUSH_EXPORT_N=y -+CONFIG_HUSH_RANDOM_SUPPORT=y - CONFIG_LASH=y - CONFIG_MSH=y - CONFIG_SH_MATH_SUPPORT=y diff --git a/package/busybox/busybox-1.16.0-hush.patch b/package/busybox/busybox-1.16.0-hush.patch deleted file mode 100644 index 7847cc5787..0000000000 --- a/package/busybox/busybox-1.16.0-hush.patch +++ /dev/null @@ -1,14 +0,0 @@ -diff -urpN busybox-1.16.0/shell/hush.c busybox-1.16.0-hush/shell/hush.c ---- busybox-1.16.0/shell/hush.c 2010-01-25 17:51:24.000000000 +0100 -+++ busybox-1.16.0-hush/shell/hush.c 2010-03-22 01:46:39.000000000 +0100 -@@ -3568,7 +3568,9 @@ static void execvp_or_die(char **argv) - { - debug_printf_exec("execing '%s'\n", argv[0]); - sigprocmask(SIG_SETMASK, &G.inherited_set, NULL); -- execvp(argv[0], argv); -+ /* if FEATURE_SH_STANDALONE, "exec " should work, -+ * therefore we should use BB_EXECVP, not execvp */ -+ BB_EXECVP(argv[0], argv); - bb_perror_msg("can't execute '%s'", argv[0]); - _exit(127); /* bash compat */ - } diff --git a/package/busybox/busybox-1.16.0-linux_swap.patch b/package/busybox/busybox-1.16.0-linux_swap.patch deleted file mode 100644 index 78d60a8de7..0000000000 --- a/package/busybox/busybox-1.16.0-linux_swap.patch +++ /dev/null @@ -1,16 +0,0 @@ -diff -urpN busybox-1.16.0/util-linux/volume_id/linux_swap.c busybox-1.16.0-linux_swap/util-linux/volume_id/linux_swap.c ---- busybox-1.16.0/util-linux/volume_id/linux_swap.c 2010-01-25 01:59:39.000000000 +0100 -+++ busybox-1.16.0-linux_swap/util-linux/volume_id/linux_swap.c 2010-02-21 01:53:21.000000000 +0100 -@@ -52,7 +52,11 @@ int FAST_FUNC volume_id_probe_linux_swap - goto found; - } - -- if (memcmp(buf, "SWAPSPACE2", 10) == 0) { -+ if (memcmp(buf, "SWAPSPACE2", 10) == 0 -+ || memcmp(buf, "S1SUSPEND", 9) == 0 -+ || memcmp(buf, "S2SUSPEND", 9) == 0 -+ || memcmp(buf, "ULSUSPEND", 9) == 0 -+ ) { - sw = volume_id_get_buffer(id, off, sizeof(struct swap_header_v1_2)); - if (sw == NULL) - return -1; diff --git a/package/busybox/busybox-1.16.0-md5_sha_compat.patch b/package/busybox/busybox-1.16.0-md5_sha_compat.patch deleted file mode 100644 index e982c0efba..0000000000 --- a/package/busybox/busybox-1.16.0-md5_sha_compat.patch +++ /dev/null @@ -1,16 +0,0 @@ -diff -urpN busybox-1.16.0/coreutils/md5_sha1_sum.c busybox-1.16.0-md5_sha_compat/coreutils/md5_sha1_sum.c ---- busybox-1.16.0/coreutils/md5_sha1_sum.c 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-md5_sha_compat/coreutils/md5_sha1_sum.c 2010-02-21 01:53:28.000000000 +0100 -@@ -101,8 +101,10 @@ int md5_sha1_sum_main(int argc UNUSED_PA - unsigned flags; - /*hash_algo_t hash_algo = applet_name[3];*/ - -- if (ENABLE_FEATURE_MD5_SHA1_SUM_CHECK) -- flags = getopt32(argv, "scw"); -+ if (ENABLE_FEATURE_MD5_SHA1_SUM_CHECK) { -+ /* -b "binary", -t "text" are ignored (shaNNNsum compat) */ -+ flags = getopt32(argv, "scwbt"); -+ } - else optind = 1; - argv += optind; - //argc -= optind; diff --git a/package/busybox/busybox-1.16.0-standalone_single.patch b/package/busybox/busybox-1.16.0-standalone_single.patch deleted file mode 100644 index 011a36ca31..0000000000 --- a/package/busybox/busybox-1.16.0-standalone_single.patch +++ /dev/null @@ -1,78 +0,0 @@ -diff -urpN busybox-1.16.0/applets/applet_tables.c busybox-1.16.0-standalone_single/applets/applet_tables.c ---- busybox-1.16.0/applets/applet_tables.c 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-standalone_single/applets/applet_tables.c 2010-03-21 19:44:06.000000000 +0100 -@@ -79,6 +79,7 @@ int main(int argc, char **argv) - } - printf("\n"); - -+ printf("#ifndef SKIP_definitions\n"); - printf("const char applet_names[] ALIGN1 = \"\"\n"); - for (i = 0; i < NUM_APPLETS; i++) { - printf("\"%s\" \"\\0\"\n", applets[i].name); -@@ -120,9 +121,10 @@ int main(int argc, char **argv) - printf("0x%02x,\n", v); - i++; - } -- printf("};\n\n"); -+ printf("};\n"); - #endif -- -+ printf("#endif /* SKIP_definitions */\n"); -+ printf("\n"); - printf("#define MAX_APPLET_NAME_LEN %u\n", MAX_APPLET_NAME_LEN); - - return 0; -diff -urpN busybox-1.16.0/shell/ash.c busybox-1.16.0-standalone_single/shell/ash.c ---- busybox-1.16.0/shell/ash.c 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-standalone_single/shell/ash.c 2010-03-21 19:44:06.000000000 +0100 -@@ -43,8 +43,6 @@ - #endif - - #include "busybox.h" /* for applet_names */ --//TODO: pull in some .h and find out do we have SINGLE_APPLET_MAIN? --//#include "applet_tables.h" doesn't work - #include - #include - #include -@@ -58,12 +56,15 @@ - # define CLEAR_RANDOM_T(rnd) ((void)0) - #endif - --#if defined SINGLE_APPLET_MAIN -+#define SKIP_definitions 1 -+#include "applet_tables.h" -+#undef SKIP_definitions -+#if NUM_APPLETS == 1 - /* STANDALONE does not make sense, and won't compile */ - # undef CONFIG_FEATURE_SH_STANDALONE - # undef ENABLE_FEATURE_SH_STANDALONE - # undef IF_FEATURE_SH_STANDALONE --# undef IF_NOT_FEATURE_SH_STANDALONE(...) -+# undef IF_NOT_FEATURE_SH_STANDALONE - # define ENABLE_FEATURE_SH_STANDALONE 0 - # define IF_FEATURE_SH_STANDALONE(...) - # define IF_NOT_FEATURE_SH_STANDALONE(...) __VA_ARGS__ -diff -urpN busybox-1.16.0/shell/hush.c busybox-1.16.0-standalone_single/shell/hush.c ---- busybox-1.16.0/shell/hush.c 2010-01-25 17:51:24.000000000 +0100 -+++ busybox-1.16.0-standalone_single/shell/hush.c 2010-03-21 19:44:06.000000000 +0100 -@@ -125,14 +125,18 @@ - # define USE_FOR_MMU(...) - #endif - --#if defined SINGLE_APPLET_MAIN -+#define SKIP_definitions 1 -+#include "applet_tables.h" -+#undef SKIP_definitions -+#if NUM_APPLETS == 1 - /* STANDALONE does not make sense, and won't compile */ - # undef CONFIG_FEATURE_SH_STANDALONE - # undef ENABLE_FEATURE_SH_STANDALONE - # undef IF_FEATURE_SH_STANDALONE -+# undef IF_NOT_FEATURE_SH_STANDALONE -+# define ENABLE_FEATURE_SH_STANDALONE 0 - # define IF_FEATURE_SH_STANDALONE(...) - # define IF_NOT_FEATURE_SH_STANDALONE(...) __VA_ARGS__ --# define ENABLE_FEATURE_SH_STANDALONE 0 - #endif - - #if !ENABLE_HUSH_INTERACTIVE diff --git a/package/busybox/busybox-1.16.0-syslogd.patch b/package/busybox/busybox-1.16.0-syslogd.patch deleted file mode 100644 index dcca134fd5..0000000000 --- a/package/busybox/busybox-1.16.0-syslogd.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -urpN busybox-1.16.0/sysklogd/syslogd.c busybox-1.16.0-syslogd/sysklogd/syslogd.c ---- busybox-1.16.0/sysklogd/syslogd.c 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-syslogd/sysklogd/syslogd.c 2010-02-21 01:53:33.000000000 +0100 -@@ -698,7 +698,7 @@ int syslogd_main(int argc UNUSED_PARAM, - if (!(opts & OPT_nofork)) { - bb_daemonize_or_rexec(DAEMON_CHDIR_ROOT, argv); - } -- umask(0); -+ //umask(0); - why?? - write_pidfile("/var/run/syslogd.pid"); - do_syslogd(); - /* return EXIT_SUCCESS; */ diff --git a/package/busybox/busybox-1.16.0-tail.patch b/package/busybox/busybox-1.16.0-tail.patch deleted file mode 100644 index 11832a8741..0000000000 --- a/package/busybox/busybox-1.16.0-tail.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff -urpN busybox-1.16.0/coreutils/tail.c busybox-1.16.0-tail/coreutils/tail.c ---- busybox-1.16.0/coreutils/tail.c 2010-03-08 22:49:32.000000000 +0100 -+++ busybox-1.16.0-tail/coreutils/tail.c 2010-03-12 22:16:07.105943986 +0100 -@@ -241,7 +241,8 @@ int tail_main(int argc, char **argv) - } while (nwrite); - } - } -- xwrite(STDOUT_FILENO, buf + nread - nwrite, nwrite); -+ if (nwrite > 0) -+ xwrite(STDOUT_FILENO, buf + nread - nwrite, nwrite); - } else if (count) { - if (COUNT_BYTES) { - taillen += nread; diff --git a/package/busybox/busybox-1.16.0-tftp.patch b/package/busybox/busybox-1.16.0-tftp.patch deleted file mode 100644 index b6fb6c7b3e..0000000000 --- a/package/busybox/busybox-1.16.0-tftp.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -urpN busybox-1.16.0/networking/tftp.c busybox-1.16.0-tftp/networking/tftp.c ---- busybox-1.16.0/networking/tftp.c 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-tftp/networking/tftp.c 2010-02-21 01:53:41.000000000 +0100 -@@ -308,7 +308,7 @@ static int tftp_protocol( - - if (!ENABLE_TFTP || our_lsa) { /* tftpd */ - /* Open file (must be after changing user) */ -- local_fd = open(local_file, open_mode); -+ local_fd = open(local_file, open_mode, 0666); - if (local_fd < 0) { - error_pkt_reason = ERR_NOFILE; - strcpy((char*)error_pkt_str, "can't open file"); diff --git a/package/busybox/busybox-1.16.0-touch.patch b/package/busybox/busybox-1.16.0-touch.patch deleted file mode 100644 index 4cd62b562a..0000000000 --- a/package/busybox/busybox-1.16.0-touch.patch +++ /dev/null @@ -1,21 +0,0 @@ -diff -urpN busybox-1.16.0/coreutils/touch.c busybox-1.16.0-touch/coreutils/touch.c ---- busybox-1.16.0/coreutils/touch.c 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-touch/coreutils/touch.c 2010-03-21 13:05:34.000000000 +0100 -@@ -104,7 +104,7 @@ int touch_main(int argc UNUSED_PARAM, ch - } - - do { -- if (utimes(*argv, reference_file ? timebuf : NULL) != 0) { -+ if (utimes(*argv, (reference_file || date_str) ? timebuf : NULL) != 0) { - if (errno == ENOENT) { /* no such file */ - if (opts) { /* creation is disabled, so ignore */ - continue; -@@ -113,7 +113,7 @@ int touch_main(int argc UNUSED_PARAM, ch - fd = open(*argv, O_RDWR | O_CREAT, 0666); - if (fd >= 0) { - xclose(fd); -- if (reference_file) -+ if (reference_file || date_str) - utimes(*argv, timebuf); - continue; - } diff --git a/package/busybox/busybox-1.16.0-usage.patch b/package/busybox/busybox-1.16.0-usage.patch deleted file mode 100644 index a2e884bb3c..0000000000 --- a/package/busybox/busybox-1.16.0-usage.patch +++ /dev/null @@ -1,1141 +0,0 @@ -diff -urpN busybox-1.16.0/include/usage.h busybox-1.16.0-usage/include/usage.h ---- busybox-1.16.0/include/usage.h 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-usage/include/usage.h 2010-02-21 01:53:47.000000000 +0100 -@@ -16,7 +16,7 @@ - #define NOUSAGE_STR "\b" - - #define acpid_trivial_usage \ -- "[-d] [-c CONFDIR] [-l LOGFILE] [-e PROC_EVENT_FILE] [EVDEV_EVENT_FILE...]" -+ "[-d] [-c CONFDIR] [-l LOGFILE] [-e PROC_EVENT_FILE] [EVDEV_EVENT_FILE]..." - #define acpid_full_usage "\n\n" \ - "Listen to ACPI events and spawn specific helpers on event arrival\n" \ - "\nOptions:" \ -@@ -33,7 +33,7 @@ - "# acpid -d /dev/input/event*\n" - - #define addgroup_trivial_usage \ -- "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[user_name] ") "group_name" -+ "[-g GID] " IF_FEATURE_ADDUSER_TO_GROUP("[USER] ") "GROUP" - #define addgroup_full_usage "\n\n" \ - "Add a group " IF_FEATURE_ADDUSER_TO_GROUP("or add a user to a group") "\n" \ - "\nOptions:" \ -@@ -41,7 +41,7 @@ - "\n -S Create a system group" \ - - #define adduser_trivial_usage \ -- "[OPTIONS] user_name" -+ "[OPTIONS] USER" - #define adduser_full_usage "\n\n" \ - "Add a user\n" \ - "\nOptions:" \ -@@ -55,16 +55,16 @@ - "\n -u UID User id" \ - - #define adjtimex_trivial_usage \ -- "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" -+ "[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]" - #define adjtimex_full_usage "\n\n" \ -- "Read and optionally set system timebase parameters. See adjtimex(2).\n" \ -+ "Read and optionally set system timebase parameters. See adjtimex(2)\n" \ - "\nOptions:" \ -- "\n -q Quiet" \ -- "\n -o offset Time offset, microseconds" \ -- "\n -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)" \ -- "\n (positive values make clock run faster)" \ -- "\n -t tick Microseconds per tick, usually 10000" \ -- "\n -p timeconstant" \ -+ "\n -q Quiet" \ -+ "\n -o OFF Time offset, microseconds" \ -+ "\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \ -+ "\n (positive values make clock run faster)" \ -+ "\n -t TICK Microseconds per tick, usually 10000" \ -+ "\n -p TCONST" \ - - #define ar_trivial_usage \ - "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES" -@@ -78,11 +78,11 @@ - "\n -v Verbose" \ - - #define arp_trivial_usage \ -- "\n[-vn] [-H type] [-i if] -a [hostname]" \ -- "\n[-v] [-i if] -d hostname [pub]" \ -- "\n[-v] [-H type] [-i if] -s hostname hw_addr [temp]" \ -- "\n[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub" \ -- "\n[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub" -+ "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \ -+ "\n[-v] [-i IF] -d HOSTNAME [pub]" \ -+ "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \ -+ "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \ -+ "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub" - #define arp_full_usage "\n\n" \ - "Manipulate ARP cache\n" \ - "\nOptions:" \ -@@ -97,7 +97,7 @@ - "\n -H HWTYPE Hardware address type" \ - - #define arping_trivial_usage \ -- "[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target" -+ "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP" - #define arping_full_usage "\n\n" \ - "Send ARP requests/replies\n" \ - "\nOptions:" \ -@@ -108,10 +108,10 @@ - "\n -U Unsolicited ARP mode, update your neighbors" \ - "\n -A ARP answer mode, update your neighbors" \ - "\n -c N Stop after sending N ARP requests" \ -- "\n -w timeout Time to wait for ARP reply, in seconds" \ -- "\n -I dev Interface to use (default eth0)" \ -- "\n -s sender Sender IP address" \ -- "\n target Target IP address" \ -+ "\n -w TIMEOUT Time to wait for ARP reply, seconds" \ -+ "\n -I IFACE Interface to use (default eth0)" \ -+ "\n -s SRC_IP Sender IP address" \ -+ "\n DST_IP Target IP address" \ - - #define sh_trivial_usage NOUSAGE_STR - #define sh_full_usage "" -@@ -191,19 +191,19 @@ - ) \ - - #define bunzip2_trivial_usage \ -- "[OPTIONS] [FILE]" -+ "[OPTIONS] [FILE]..." - #define bunzip2_full_usage "\n\n" \ -- "Uncompress FILE (or standard input)\n" \ -+ "Uncompress FILEs (or stdin)\n" \ - "\nOptions:" \ -- "\n -c Write to standard output" \ -+ "\n -c Write to stdout" \ - "\n -f Force" \ - - #define bzip2_trivial_usage \ - "[OPTIONS] [FILE]..." - #define bzip2_full_usage "\n\n" \ -- "Compress FILEs (or standard input) with bzip2 algorithm.\n" \ -+ "Compress FILEs (or stdin) with bzip2 algorithm\n" \ - "\nOptions:" \ -- "\n -c Write to standard output" \ -+ "\n -c Write to stdout" \ - "\n -d Decompress" \ - "\n -f Force" \ - "\n -1..-9 Compression level" \ -@@ -214,7 +214,7 @@ - #define lzop_trivial_usage \ - "[-cfvd123456789CF] [FILE]..." - #define lzop_full_usage "\n\n" \ -- " -c Write to standard output" \ -+ " -c Write to stdout" \ - "\n -f Force" \ - "\n -v Verbose" \ - "\n -d Decompress" \ -@@ -231,7 +231,7 @@ - #define unlzop_trivial_usage \ - "[-cfvCF] [FILE]..." - #define unlzop_full_usage "\n\n" \ -- " -c Write to standard output" \ -+ " -c Write to stdout" \ - "\n -f Force" \ - "\n -v Verbose" \ - "\n -F Don't store or verify checksum" \ -@@ -242,11 +242,11 @@ - "Uncompress to stdout" - - #define unlzma_trivial_usage \ -- "[OPTIONS] [FILE]" -+ "[OPTIONS] [FILE]..." - #define unlzma_full_usage "\n\n" \ -- "Uncompress FILE (or standard input)\n" \ -+ "Uncompress FILE (or stdin)\n" \ - "\nOptions:" \ -- "\n -c Write to standard output" \ -+ "\n -c Write to stdout" \ - "\n -f Force" \ - - #define lzmacat_trivial_usage \ -@@ -255,7 +255,7 @@ - "Uncompress to stdout" - - #define cal_trivial_usage \ -- "[-jy] [[month] year]" -+ "[-jy] [[MONTH] YEAR]" - #define cal_full_usage "\n\n" \ - "Display a calendar\n" \ - "\nOptions:" \ -@@ -436,21 +436,21 @@ - "\n -c BYTES Limit core file size" \ - "\n -v Verbose" \ - "\n -P Create new process group" \ -- "\n -0 Close standard input" \ -- "\n -1 Close standard output" \ -- "\n -2 Close standard error" \ -+ "\n -0 Close stdin" \ -+ "\n -1 Close stdout" \ -+ "\n -2 Close stderr" \ - - #define setuidgid_trivial_usage \ -- "account prog args" -+ "USER PROG ARGS" - #define setuidgid_full_usage "\n\n" \ -- "Set uid and gid to account's uid and gid, removing all supplementary\n" \ -+ "Set uid and gid to USER's uid and gid, removing all supplementary\n" \ - "groups and run PROG" - #define envuidgid_trivial_usage \ -- "account prog args" -+ "USER PROG ARGS" - #define envuidgid_full_usage "\n\n" \ -- "Set $UID to account's uid and $GID to account's gid and run PROG" -+ "Set $UID to USER's uid and $GID to USER's gid and run PROG" - #define envdir_trivial_usage \ -- "dir prog args" -+ "DIR PROG ARGS" - #define envdir_full_usage "\n\n" \ - "Set various environment variables as specified by files\n" \ - "in the directory dir and run PROG" -@@ -477,7 +477,7 @@ - "\n a SIGXCPU after N seconds" \ - - #define chroot_trivial_usage \ -- "NEWROOT [PROG [ARGS]]" -+ "NEWROOT [PROG ARGS]" - #define chroot_full_usage "\n\n" \ - "Run PROG with root directory set to NEWROOT" - #define chroot_example_usage \ -@@ -527,7 +527,7 @@ - "Print the config file which built busybox" - - #define chrt_trivial_usage \ -- "[OPTIONS] [PRIO] [PID | PROG [ARGS]]" -+ "[OPTIONS] [PRIO] [PID | PROG ARGS]" - #define chrt_full_usage "\n\n" \ - "Manipulate real-time attributes of a process\n" \ - "\nOptions:" \ -@@ -567,7 +567,7 @@ - "Extract or list files from a cpio archive" \ - IF_FEATURE_CPIO_O(", or" \ - "\ncreate an archive" IF_FEATURE_CPIO_P(" (-o) or copy files (-p)") \ -- " using file list on standard input" \ -+ " using file list on stdin" \ - ) \ - "\n" \ - "\nMain operation mode:" \ -@@ -658,7 +658,7 @@ - #define cut_trivial_usage \ - "[OPTIONS] [FILE]..." - #define cut_full_usage "\n\n" \ -- "Print selected fields from each input FILE to standard output\n" \ -+ "Print selected fields from each input FILE to stdout\n" \ - "\nOptions:" \ - "\n -b LIST Output only bytes from LIST" \ - "\n -c LIST Output only characters from LIST" \ -@@ -721,7 +721,7 @@ - "p - print top of the stack (without altering the stack),\n" \ - "f - print entire stack, o - pop the value and set output radix\n" \ - "(value must be 10 or 16).\n" \ -- "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16.\n" \ -+ "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16\n" \ - - #define dc_example_usage \ - "$ dc 2 2 + p\n" \ -@@ -815,7 +815,7 @@ - "[-Pk" \ - IF_FEATURE_HUMAN_READABLE("mh") \ - IF_FEATURE_DF_FANCY("ai] [-B SIZE") \ -- "] [FILESYSTEM...]" -+ "] [FILESYSTEM]..." - #define df_full_usage "\n\n" \ - "Print filesystem usage statistics\n" \ - "\nOptions:" \ -@@ -847,7 +847,7 @@ - "/dev/sda3 17381728 17107080 274648 98% /\n" - - #define dhcprelay_trivial_usage \ -- "CLIENT_IFACE[,CLIENT_IFACE2...] SERVER_IFACE [SERVER_IP]" -+ "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]" - #define dhcprelay_full_usage "\n\n" \ - "Relay DHCP requests between clients and server" \ - -@@ -893,15 +893,20 @@ - "\n -s SIZE Buffer size" \ - - #define dnsd_trivial_usage \ -- "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]" -+ "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]" - #define dnsd_full_usage "\n\n" \ - "Small static DNS server daemon\n" \ - "\nOptions:" \ -- "\n -c Config filename" \ -- "\n -t TTL in seconds" \ -- "\n -p Listening port" \ -- "\n -i Listening ip (default all)" \ -+ "\n -c FILE Config file" \ -+ "\n -t SEC TTL" \ -+ "\n -p PORT Listen on PORT" \ -+ "\n -i ADDR Listen on ADDR" \ - "\n -d Daemonize" \ -+ "\n -v Verbose" \ -+ "\n -s Send successful replies only. Use this if you want" \ -+ "\n to use /etc/resolv.conf with two nameserver lines:" \ -+ "\n nameserver DNSD_SERVER" \ -+ "\n nameserver NORNAL_DNS_SERVER" \ - - #define dos2unix_trivial_usage \ - "[OPTIONS] [FILE]" -@@ -922,7 +927,7 @@ - "\n -d unix2dos" \ - - #define dpkg_trivial_usage \ -- "[-ilCPru] [-F option] package_name" -+ "[-ilCPru] [-F OPT] PACKAGE" - #define dpkg_full_usage "\n\n" \ - "Install, remove and manage Debian packages\n" \ - "\nOptions:" \ -@@ -988,7 +993,7 @@ - #define dumpkmap_trivial_usage \ - "> keymap" - #define dumpkmap_full_usage "\n\n" \ -- "Print a binary keyboard translation table to standard output" -+ "Print a binary keyboard translation table to stdout" - #define dumpkmap_example_usage \ - "$ dumpkmap > keymap\n" - -@@ -1031,7 +1036,7 @@ - */ - - #define echo_trivial_usage \ -- IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG...]" -+ IF_FEATURE_FANCY_ECHO("[-neE] ") "[ARG]..." - #define echo_full_usage "\n\n" \ - "Print the specified ARGs to stdout" \ - IF_FEATURE_FANCY_ECHO( "\n" \ -@@ -1053,7 +1058,7 @@ - #define eject_trivial_usage \ - "[-t] [-T] [DEVICE]" - #define eject_full_usage "\n\n" \ -- "Eject specified DEVICE (or default /dev/cdrom)\n" \ -+ "Eject DEVICE or default /dev/cdrom\n" \ - "\nOptions:" \ - IF_FEATURE_EJECT_SCSI( \ - "\n -s SCSI device" \ -@@ -1065,7 +1070,7 @@ - #define ed_full_usage "" - - #define env_trivial_usage \ -- "[-iu] [-] [name=value]... [PROG [ARGS]]" -+ "[-iu] [-] [name=value]... [PROG ARGS]" - #define env_full_usage "\n\n" \ - "Print the current environment or run PROG after setting up\n" \ - "the specified environment\n" \ -@@ -1087,7 +1092,7 @@ - #define expand_trivial_usage \ - "[-i] [-t N] [FILE|-]" - #define expand_full_usage "\n\n" \ -- "Convert tabs to spaces, writing to standard output\n" \ -+ "Convert tabs to spaces, writing to stdout\n" \ - "\nOptions:" \ - IF_FEATURE_EXPAND_LONG_OPTIONS( \ - "\n -i,--initial Don't convert tabs after non blanks" \ -@@ -1101,7 +1106,7 @@ - #define expr_trivial_usage \ - "EXPRESSION" - #define expr_full_usage "\n\n" \ -- "Print the value of EXPRESSION to standard output\n" \ -+ "Print the value of EXPRESSION to stdout\n" \ - "\n" \ - "EXPRESSION may be:\n" \ - " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ -@@ -1216,7 +1221,7 @@ - "$ findfs LABEL=MyDevice" - - #define find_trivial_usage \ -- "[PATH...] [EXPRESSION]" -+ "[PATH]... [EXPRESSION]" - #define find_full_usage "\n\n" \ - "Search for files. The default PATH is the current directory,\n" \ - "default EXPRESSION is '-print'\n" \ -@@ -1256,7 +1261,7 @@ - IF_FEATURE_FIND_DEPTH( \ - "\n -depth Process directory name after traversing it") \ - IF_FEATURE_FIND_SIZE( \ -- "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))." \ -+ "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))" \ - "\n +/-N: file size is bigger/smaller than N") \ - IF_FEATURE_FIND_LINKS( \ - "\n -links N Number of links is greater than (+N), less than (-N)," \ -@@ -1308,10 +1313,9 @@ - "\n -v Verbose" \ - - #define fold_trivial_usage \ -- "[-bs] [-w WIDTH] [FILE]" -+ "[-bs] [-w WIDTH] [FILE]..." - #define fold_full_usage "\n\n" \ -- "Wrap input lines in each FILE (standard input by default), writing to\n" \ -- "standard output\n" \ -+ "Wrap input lines in each FILE (or stdin), writing to stdout\n" \ - "\nOptions:" \ - "\n -b Count bytes rather than columns" \ - "\n -s Break at spaces" \ -@@ -1336,7 +1340,7 @@ - "$ freeramdisk /dev/ram2\n" - - #define fsck_trivial_usage \ -- "[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys...]" -+ "[-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]..." - #define fsck_full_usage "\n\n" \ - "Check and repair filesystems\n" \ - "\nOptions:" \ -@@ -1347,10 +1351,10 @@ - "\n -T Don't show title on startup" \ - "\n -V Verbose" \ - "\n -C n Write status information to specified filedescriptor" \ -- "\n -t type List of filesystem types to check" \ -+ "\n -t TYPE List of filesystem types to check" \ - - #define fsck_minix_trivial_usage \ -- "[-larvsmf] /dev/name" -+ "[-larvsmf] BLOCKDEV" - #define fsck_minix_full_usage "\n\n" \ - "Check MINIX filesystem\n" \ - "\nOptions:" \ -@@ -1463,7 +1467,7 @@ - "#!/bin/sh\n" \ - "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ - " -n 'example.busybox' -- \"$@\"`\n" \ -- "if [ $? != 0 ]; then exit 1; fi\n" \ -+ "if [ $? != 0 ]; then exit 1; fi\n" \ - "eval set -- \"$GETOPT\"\n" \ - "while true; do\n" \ - " case $1 in\n" \ -@@ -1502,42 +1506,47 @@ - "\n -H HOST Log HOST into the utmp file as the hostname" \ - - #define grep_trivial_usage \ -- "[-HhrilLnqvso" \ -+ "[-HhnlLoqvsri" \ - IF_DESKTOP("w") \ -- "eF" \ -+ "F" \ - IF_FEATURE_GREP_EGREP_ALIAS("E") \ -- IF_FEATURE_GREP_CONTEXT("ABC") \ - IF_EXTRA_COMPAT("z") \ -- "] PATTERN [FILE]..." -+ "] [-m N] " \ -+ IF_FEATURE_GREP_CONTEXT("[-A/B/C N] ") \ -+ "PATTERN/-e PATTERN.../-f FILE [FILE]..." - #define grep_full_usage "\n\n" \ -- "Search for PATTERN in each FILE or standard input\n" \ -+ "Search for PATTERN in FILEs (or stdin)\n" \ - "\nOptions:" \ -- "\n -H Prefix output lines with filename where match was found" \ -- "\n -h Suppress the prefixing filename on output" \ -- "\n -r Recurse" \ -- "\n -i Ignore case distinctions" \ -- "\n -l List names of files that match" \ -- "\n -L List names of files that don't match" \ -- "\n -n Print line number with output lines" \ -+ "\n -H Add 'filename:' prefix" \ -+ "\n -h Do not add 'filename:' prefix" \ -+ "\n -n Add 'line_no:' prefix" \ -+ "\n -l Show only names of files that match" \ -+ "\n -L Show only names of files that don't match" \ -+ "\n -c Show only count of matching lines" \ -+ "\n -o Show only the matching part of line" \ - "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \ - "\n -v Select non-matching lines" \ -- "\n -s Suppress file open/read error messages" \ -- "\n -c Only print count of matching lines" \ -- "\n -o Show only the part of a line that matches PATTERN" \ -- "\n -m N Match up to N times per file" \ -+ "\n -s Suppress open and read errors" \ -+ "\n -r Recurse" \ -+ "\n -i Ignore case" \ - IF_DESKTOP( \ -- "\n -w Match whole words only") \ -- "\n -F PATTERN is a set of newline-separated strings" \ -+ "\n -w Match whole words only" \ -+ ) \ -+ "\n -F PATTERN is a literal (not regexp)" \ - IF_FEATURE_GREP_EGREP_ALIAS( \ -- "\n -E PATTERN is an extended regular expression") \ -- "\n -e PTRN Pattern to match" \ -- "\n -f FILE Read pattern from file" \ -+ "\n -E PATTERN is an extended regexp" \ -+ ) \ -+ IF_EXTRA_COMPAT( \ -+ "\n -z Input is NUL terminated" \ -+ ) \ -+ "\n -m N Match up to N times per file" \ - IF_FEATURE_GREP_CONTEXT( \ - "\n -A N Print N lines of trailing context" \ - "\n -B N Print N lines of leading context" \ -- "\n -C N Print N lines of output context") \ -- IF_EXTRA_COMPAT( \ -- "\n -z Input is NUL terminated") \ -+ "\n -C N Same as '-A N -B N'" \ -+ ) \ -+ "\n -e PTRN Pattern to match" \ -+ "\n -f FILE Read pattern from file" \ - - #define grep_example_usage \ - "$ grep root /etc/passwd\n" \ -@@ -1554,9 +1563,9 @@ - #define gunzip_trivial_usage \ - "[OPTIONS] [FILE]..." - #define gunzip_full_usage "\n\n" \ -- "Uncompress FILEs (or standard input)\n" \ -+ "Uncompress FILEs (or stdin)\n" \ - "\nOptions:" \ -- "\n -c Write to standard output" \ -+ "\n -c Write to stdout" \ - "\n -f Force" \ - "\n -t Test file integrity" \ - -@@ -1570,9 +1579,9 @@ - #define gzip_trivial_usage \ - "[OPTIONS] [FILE]..." - #define gzip_full_usage "\n\n" \ -- "Compress FILEs (or standard input)\n" \ -+ "Compress FILEs (or stdin)\n" \ - "\nOptions:" \ -- "\n -c Write to standard output" \ -+ "\n -c Write to stdout" \ - "\n -d Decompress" \ - "\n -f Force" \ - -@@ -1649,7 +1658,7 @@ - #define head_trivial_usage \ - "[OPTIONS] [FILE]..." - #define head_full_usage "\n\n" \ -- "Print first 10 lines of each FILE (or standard input) to standard output.\n" \ -+ "Print first 10 lines of each FILE (or stdin) to stdout.\n" \ - "With more than one FILE, precede each with a header giving the file name.\n" \ - "\nOptions:" \ - "\n -n N Print first N lines instead of first 10" \ -@@ -1664,9 +1673,9 @@ - "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" - - #define hexdump_trivial_usage \ -- "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] FILE..." -+ "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..." - #define hexdump_full_usage "\n\n" \ -- "Display FILEs or standard input in a user specified format\n" \ -+ "Display FILEs (or stdin) in a user specified format\n" \ - "\nOptions:" \ - "\n -b One-byte octal display" \ - "\n -c One-byte character display" \ -@@ -1795,7 +1804,7 @@ - " [up|down] ..." - - #define ifenslave_trivial_usage \ -- "[-cdf] master-iface " -+ "[-cdf] MASTER_IFACE SLAVE_IFACE..." - #define ifenslave_full_usage "\n\n" \ - "Configure network interfaces for parallel routing\n" \ - "\nOptions:" \ -@@ -1847,7 +1856,7 @@ - "\n -k Kill running daemon" \ - - #define ifup_trivial_usage \ -- "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..." -+ "[-ain"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] IFACE..." - #define ifup_full_usage "\n\n" \ - "Options:" \ - "\n -a De/configure all interfaces automatically" \ -@@ -2018,11 +2027,11 @@ - " ::shutdown:/sbin/swapoff -a\n" - - #define inotifyd_trivial_usage \ -- "PROG FILE1[:MASK] ..." -+ "PROG FILE1[:MASK]..." - #define inotifyd_full_usage "\n\n" \ - "Run PROG on filesystem changes." \ - "\nWhen a filesystem event matching MASK occurs on FILEn," \ -- "\nPROG [] is run." \ -+ "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \ - "\nEvents:" \ - "\n a File is accessed" \ - "\n c File is modified" \ -@@ -2042,7 +2051,7 @@ - "\n d Subfile is deleted" \ - "\n" \ - "\ninotifyd waits for PROG to exit." \ -- "\nWhen x event happens for all FILEs, inotifyd exits" \ -+ "\nWhen x event happens for all FILEs, inotifyd exits." \ - - /* 2.6 style insmod has no options and required filename - * (not module name - .ko can't be omitted) */ -@@ -2068,7 +2077,7 @@ - - /* -v, -b, -c are ignored */ - #define install_trivial_usage \ -- "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [source] dest|directory" -+ "[-cdDsp] [-o USER] [-g GRP] [-m MODE] [SOURCE]... DEST" - #define install_full_usage "\n\n" \ - "Copy files and set attributes\n" \ - "\nOptions:" \ -@@ -2247,7 +2256,7 @@ - "$ kill 252\n" - - #define killall_trivial_usage \ -- "[-l] [-q] [-SIG] process-name..." -+ "[-l] [-q] [-SIG] PROCESS_NAME..." - #define killall_full_usage "\n\n" \ - "Send a signal (default: TERM) to given processes\n" \ - "\nOptions:" \ -@@ -2287,8 +2296,7 @@ - #define less_trivial_usage \ - "[-EMNmh~I?] [FILE]..." - #define less_full_usage "\n\n" \ -- "View a file or list of files. The position within files can be\n" \ -- "changed, and files can be manipulated in various ways.\n" \ -+ "View FILE (or stdin) one screenful at a time\n" \ - "\nOptions:" \ - "\n -E Quit once the end of a file is reached" \ - "\n -M,-m Display status line with line numbers" \ -@@ -2306,7 +2314,7 @@ - #define linuxrc_full_usage "" - - #define setarch_trivial_usage \ -- "personality program [args...]" -+ "personality PROG ARGS" - #define setarch_full_usage "\n\n" \ - "Personality may be:\n" \ - " linux32 Set 32bit uname emulation\n" \ -@@ -2334,7 +2342,7 @@ - #define loadfont_trivial_usage \ - "< font" - #define loadfont_full_usage "\n\n" \ -- "Load a console font from standard input" \ -+ "Load a console font from stdin" \ - /* "\n -C TTY Affect TTY instead of /dev/tty" */ \ - - #define loadfont_example_usage \ -@@ -2343,7 +2351,7 @@ - #define loadkmap_trivial_usage \ - "< keymap" - #define loadkmap_full_usage "\n\n" \ -- "Load a binary keyboard translation table from standard input\n" \ -+ "Load a binary keyboard translation table from stdin\n" \ - /* "\n -C TTY Affect TTY instead of /dev/tty" */ \ - - #define loadkmap_example_usage \ -@@ -2352,7 +2360,7 @@ - #define logger_trivial_usage \ - "[OPTIONS] [MESSAGE]" - #define logger_full_usage "\n\n" \ -- "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n" \ -+ "Write MESSAGE (or stdin) to syslog\n" \ - "\nOptions:" \ - "\n -s Log to stderr as well as the system log" \ - "\n -t TAG Log using the specified tag (defaults to user name)" \ -@@ -2415,7 +2423,7 @@ - "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \ - - #define lpq_trivial_usage \ -- "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID...] [-fs]" -+ "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]" - #define lpq_full_usage "\n\n" \ - "Options:" \ - "\n -P lp service to connect to (else uses $PRINTER)" \ -@@ -2764,8 +2772,8 @@ - "[-L LABEL] " \ - /* "[-M last-mounted-directory] [-S] [-T filesystem-type] " */ \ - "BLOCKDEV [KBYTES]" --#define mkfs_ext2_full_usage "\n" \ -- "\n -b BLK_SIZE Block size, bytes" \ -+#define mkfs_ext2_full_usage "\n\n" \ -+ " -b BLK_SIZE Block size, bytes" \ - /* "\n -c Check device for bad blocks" */ \ - /* "\n -E opts Set extended options" */ \ - /* "\n -f size Fragment size in bytes" */ \ -@@ -2790,14 +2798,14 @@ - /* "\n -v Verbose" */ \ - - #define mkfs_minix_trivial_usage \ -- "[-c | -l filename] [-nXX] [-iXX] BLOCKDEV [KBYTES]" -+ "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]" - #define mkfs_minix_full_usage "\n\n" \ - "Make a MINIX filesystem\n" \ - "\nOptions:" \ - "\n -c Check device for bad blocks" \ - "\n -n [14|30] Maximum length of filenames" \ - "\n -i INODES Number of inodes for the filesystem" \ -- "\n -l FILENAME Read bad blocks list from FILENAME" \ -+ "\n -l FILE Read bad blocks list from FILE" \ - "\n -v Make version 2 filesystem" \ - - #define mkfs_reiser_trivial_usage \ -@@ -2844,7 +2852,7 @@ - "$ mknod -m 644 /tmp/pipe p\n" - - #define mkswap_trivial_usage \ -- "[OPTIONS] BLOCKDEV" /* [SIZE_IN_KB] */ -+ "[OPTIONS] BLOCKDEV [KBYTES]" - #define mkswap_full_usage "\n\n" \ - "Prepare BLOCKDEV to be used as swap partition\n" \ - "\nOptions:" \ -@@ -2871,10 +2879,10 @@ - "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" - - #define modprobe_trivial_usage \ -- IF_MODPROBE_SMALL("[-qfwrsv] MODULE [symbol=value...]") \ -+ IF_MODPROBE_SMALL("[-qfwrsv] MODULE [symbol=value]...") \ - IF_NOT_MODPROBE_SMALL("[-" \ - IF_FEATURE_2_4_MODULES("k")"nqrsv" \ -- IF_FEATURE_MODPROBE_BLACKLIST("b")"] MODULE [symbol=value...]") -+ IF_FEATURE_MODPROBE_BLACKLIST("b")"] MODULE [symbol=value]...") - #define modprobe_full_usage "\n\n" \ - "Options:" \ - IF_MODPROBE_SMALL( \ -@@ -2962,7 +2970,7 @@ - #define more_trivial_usage \ - "[FILE]..." - #define more_full_usage "\n\n" \ -- "View FILE or standard input one screenful at a time" -+ "View FILE (or stdin) one screenful at a time" - - #define more_example_usage \ - "$ dmesg | more\n" -@@ -3180,7 +3188,7 @@ - ) - - #define nice_trivial_usage \ -- "[-n ADJUST] [PROG [ARGS]]" -+ "[-n ADJUST] [PROG ARGS]" - #define nice_full_usage "\n\n" \ - "Run PROG with modified scheduling priority\n" \ - "\nOptions:" \ -@@ -3212,7 +3220,7 @@ - "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'" - - #define nohup_trivial_usage \ -- "PROG [ARGS]" -+ "PROG ARGS" - #define nohup_full_usage "\n\n" \ - "Run PROG immune to hangups, with output to a non-tty" - #define nohup_example_usage \ -@@ -3251,10 +3259,10 @@ - "[-aBbcDdeFfHhIiLlOovXx] " IF_DESKTOP("[-t TYPE] ") "[FILE]" - #define od_full_usage "\n\n" \ - "Write an unambiguous representation, octal bytes by default, of FILE\n" \ -- "(or standard input) to standard output." -+ "(or stdin) to stdout" - - #define openvt_trivial_usage \ -- "[-c N] [-sw] [PROG [ARGS]]" -+ "[-c N] [-sw] [PROG ARGS]" - #define openvt_full_usage "\n\n" \ - "Start PROG on a new virtual terminal\n" \ - "\nOptions:" \ -@@ -3334,11 +3342,11 @@ - - #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT) - #define pidof_trivial_usage \ -- "[OPTIONS] [NAME...]" -+ "[OPTIONS] [NAME]..." - #define USAGE_PIDOF "\n\nOptions:" - #else - #define pidof_trivial_usage \ -- "[NAME...]" -+ "[NAME]..." - #define USAGE_PIDOF /* none */ - #endif - #define pidof_full_usage "\n\n" \ -@@ -3473,13 +3481,13 @@ - "\n -f Force power off (don't go through init)" \ - - #define printenv_trivial_usage \ -- "[VARIABLE...]" -+ "[VARIABLE]..." - #define printenv_full_usage "\n\n" \ -- "Print all or part of environment.\n" \ -- "If no environment VARIABLE specified, print them all." -+ "Print environment VARIABLEs.\n" \ -+ "If no VARIABLE specified, print all." - - #define printf_trivial_usage \ -- "FORMAT [ARGUMENT...]" -+ "FORMAT [ARGUMENT]..." - #define printf_full_usage "\n\n" \ - "Format and print ARGUMENT(s) according to FORMAT,\n" \ - "where FORMAT controls the output exactly as in C printf" -@@ -3610,9 +3618,9 @@ - "\n -n Disable byte order auto-detection" \ - - #define realpath_trivial_usage \ -- "pathname..." -+ "FILE..." - #define realpath_full_usage "\n\n" \ -- "Return the absolute pathnames of given argument" -+ "Return the absolute pathnames of given FILE" - - #define reboot_trivial_usage \ - "[-d DELAY] [-n] [-f]" -@@ -3628,11 +3636,11 @@ - #define reformime_full_usage "\n\n" \ - "Parse MIME-encoded message\n" \ - "\nOptions:" \ -- "\n -x prefix Extract content of MIME sections to files" \ -- "\n -X prog [args] Filter content of MIME sections through prog." \ -+ "\n -x PREFIX Extract content of MIME sections to files" \ -+ "\n -X PROG ARGS Filter content of MIME sections through PROG" \ - "\n Must be the last option" \ - "\n" \ -- "\nOther options are silently ignored." \ -+ "\nOther options are silently ignored" \ - - #define renice_trivial_usage \ - "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]" -@@ -3725,7 +3733,7 @@ - "\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \ - - #define rpm_trivial_usage \ -- "-i -q[ildc]p package.rpm" -+ "-i -q[ildc]p PACKAGE.rpm" - #define rpm_full_usage "\n\n" \ - "Manipulate RPM packages\n" \ - "\nOptions:" \ -@@ -3766,8 +3774,8 @@ - ) - - #define runcon_trivial_usage \ -- "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG [ARGS]\n" \ -- " runcon CONTEXT PROG [ARGS]" -+ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \ -+ " runcon CONTEXT PROG ARGS" - #define runcon_full_usage "\n\n" \ - "Run PROG in a different security context\n" \ - "\n CONTEXT Complete security context\n" \ -@@ -3813,23 +3821,23 @@ - "+ shutdown -h +4m" - - #define runlevel_trivial_usage \ -- "[utmp]" -+ "[FILE]" - #define runlevel_full_usage "\n\n" \ - "Find the current and previous system runlevel\n" \ - "\n" \ -- "If no utmp file exists or if no runlevel record can be found,\n" \ -+ "If no utmp FILE exists or if no runlevel record can be found,\n" \ - "print \"unknown\"" - #define runlevel_example_usage \ - "$ runlevel /var/run/utmp\n" \ - "N 2" - - #define runsv_trivial_usage \ -- "dir" -+ "DIR" - #define runsv_full_usage "\n\n" \ - "Start and monitor a service and optionally an appendant log service" - - #define runsvdir_trivial_usage \ -- "[-P] [-s SCRIPT] dir" -+ "[-P] [-s SCRIPT] DIR" - #define runsvdir_full_usage "\n\n" \ - "Start a runsv process for each subdirectory. If it exits, restart it.\n" \ - "\n -P Put each runsv in a new session" \ -@@ -3908,7 +3916,7 @@ - "[-w] [-s SEP] [FIRST [INC]] LAST" - #define seq_full_usage "\n\n" \ - "Print numbers from FIRST to LAST, in steps of INC.\n" \ -- "FIRST, INC default to 1\n" \ -+ "FIRST, INC default to 1.\n" \ - "\nOptions:" \ - "\n -w Pad to last with leading zeros" \ - "\n -s SEP String separator" \ -@@ -3949,7 +3957,7 @@ - "\n -e DIR Exclude DIR" \ - "\n -F Force reset of context to match file_context for customizable files" \ - "\n -o FILE Save list of files with incorrect context" \ -- "\n -s Take a list of files from standard input (instead of command line)" \ -+ "\n -s Take a list of files from stdin (instead of command line)" \ - "\n -v Show changes in file labels, if type or role are changing" \ - "\n -vv Show changes in file labels, if type, role, or user are changing" \ - "\n -W Display warnings about entries that had no matching files" \ -@@ -3971,7 +3979,7 @@ - "Set entries into the kernel's scancode-to-keycode map,\n" \ - "allowing unusual keyboards to generate usable keycodes.\n\n" \ - "SCANCODE may be either xx or e0xx (hexadecimal),\n" \ -- "and KEYCODE is given in decimal" \ -+ "and KEYCODE is given in decimal." \ - - #define setkeycodes_example_usage \ - "$ setkeycodes e030 127\n" -@@ -3988,7 +3996,7 @@ - "Change boolean setting" - - #define setsid_trivial_usage \ -- "PROG [ARG...]" -+ "PROG ARGS" - #define setsid_full_usage "\n\n" \ - "Run PROG in a new session. PROG will have no controlling terminal\n" \ - "and will not be affected by keyboard signals (Ctrl-C etc).\n" \ -@@ -4103,7 +4111,7 @@ - "$ cat TODO | split -a 2 -l 2 TODO_\n" - - #define start_stop_daemon_trivial_usage \ -- "[OPTIONS] [-S|-K] ... [-- arguments...]" -+ "[OPTIONS] [-S|-K] ... [-- ARGS...]" - #define start_stop_daemon_full_usage "\n\n" \ - "Search for matching processes, and then\n" \ - "-K: stop all matching processes.\n" \ -@@ -4256,7 +4264,7 @@ - "\n -s SH Shell to use instead of default shell" \ - - #define sulogin_trivial_usage \ -- "[OPTIONS] [TTY]" -+ "[-t N] [TTY]" - #define sulogin_full_usage "\n\n" \ - "Single user login\n" \ - "\nOptions:" \ -@@ -4271,7 +4279,7 @@ - "\n -s Use System V sum algorithm (512byte blocks)" \ - - #define sv_trivial_usage \ -- "[-v] [-w SEC] command service..." -+ "[-v] [-w SEC] CMD SERVICE_DIR..." - #define sv_full_usage "\n\n" \ - "Control services monitored by runsv supervisor.\n" \ - "Commands (only first character is enough):\n" \ -@@ -4289,7 +4297,7 @@ - #define svlogd_trivial_usage \ - "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..." - #define svlogd_full_usage "\n\n" \ -- "Continuously read log data from standard input, optionally\n" \ -+ "Continuously read log data from stdin, optionally\n" \ - "filter log messages, and write the data to one or more automatically\n" \ - "rotated logs" \ - -@@ -4326,7 +4334,7 @@ - - #define fsync_trivial_usage \ - "[OPTIONS] FILE..." --#define fsync_full_usage \ -+#define fsync_full_usage "\n\n" \ - "Write files' buffered blocks to disk\n" \ - "\nOptions:" \ - "\n -d Avoid syncing metadata" -@@ -4354,11 +4362,11 @@ - "[OPTIONS]" - #define syslogd_full_usage "\n\n" \ - "System logging utility.\n" \ -- "Note that this version of syslogd ignores /etc/syslog.conf.\n" \ -+ "This version of syslogd ignores /etc/syslog.conf\n" \ - "\nOptions:" \ - "\n -n Run in foreground" \ - "\n -O FILE Log to given file (default:/var/log/messages)" \ -- "\n -l n Set local log level" \ -+ "\n -l N Set local log level" \ - "\n -S Smaller logging output" \ - IF_FEATURE_ROTATE_LOGFILE( \ - "\n -s SIZE Max size (KB) before rotate (default:200KB, 0=off)" \ -@@ -4385,7 +4393,7 @@ - #define tail_trivial_usage \ - "[OPTIONS] [FILE]..." - #define tail_full_usage "\n\n" \ -- "Print last 10 lines of each FILE (or standard input) to standard output.\n" \ -+ "Print last 10 lines of each FILE (or stdin) to stdout.\n" \ - "With more than one FILE, precede each with a header giving the file name.\n" \ - "\nOptions:" \ - IF_FEATURE_FANCY_TAIL( \ -@@ -4454,7 +4462,7 @@ - "$ tar -cf /tmp/tarball.tar /usr/local\n" - - #define taskset_trivial_usage \ -- "[-p] [MASK] [PID | PROG [ARGS]]" -+ "[-p] [MASK] [PID | PROG ARGS]" - #define taskset_full_usage "\n\n" \ - "Set or get CPU affinity\n" \ - "\nOptions:" \ -@@ -4474,7 +4482,7 @@ - #define tee_trivial_usage \ - "[OPTIONS] [FILE]..." - #define tee_full_usage "\n\n" \ -- "Copy standard input to each FILE, and also to standard output\n" \ -+ "Copy stdin to each FILE, and also to stdout\n" \ - "\nOptions:" \ - "\n -a Append to the given FILEs, don't overwrite" \ - "\n -i Ignore interrupt signals (SIGINT)" \ -@@ -4514,9 +4522,9 @@ - "\n -p PORT Port to listen on" \ - "\n -b ADDR[:PORT] Address to bind to" \ - "\n -F Run in foreground" \ -- "\n -i Run as inetd service" \ -+ "\n -i Inetd mode" \ - IF_FEATURE_TELNETD_INETD_WAIT( \ -- "\n -w SEC Run as inetd service in wait mode, linger time SEC" \ -+ "\n -w SEC Inetd 'wait' mode, linger time SEC" \ - "\n -S Log to syslog (implied by -i or without -F and -w)" \ - ) \ - ) -@@ -4568,11 +4576,11 @@ - /* with not-implemented options: */ - /* "[-hpEvv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] [-i DIR|-x CDB] [-t SEC] IP PORT PROG" */ - #define tcpsvd_full_usage "\n\n" \ -- "Create TCP socket, bind to IP:PORT and listen\n" \ -+ "Create TCP socket, bind to IP:PORT and listen\n" \ - "for incoming connection. Run PROG for each connection.\n" \ - "\n IP IP to listen on. '0' = all" \ - "\n PORT Port to listen on" \ -- "\n PROG [ARGS] Program to run" \ -+ "\n PROG ARGS Program to run" \ - "\n -l NAME Local hostname (else looks up local hostname in DNS)" \ - "\n -u USER[:GRP] Change to user/group after bind" \ - "\n -c N Handle up to N connections simultaneously" \ -@@ -4592,7 +4600,7 @@ - "redirecting all further packets with same peer ip:port to it.\n" \ - "\n IP IP to listen on. '0' = all" \ - "\n PORT Port to listen on" \ -- "\n PROG [ARGS] Program to run" \ -+ "\n PROG ARGS Program to run" \ - "\n -l NAME Local hostname (else looks up local hostname in DNS)" \ - "\n -u USER[:GRP] Change to user/group after bind" \ - "\n -c N Handle up to N connections simultaneously" \ -@@ -4633,14 +4641,14 @@ - "\n -u Access files as USER" \ - - #define time_trivial_usage \ -- "[OPTIONS] PROG [ARGS]" -+ "[OPTIONS] PROG ARGS" - #define time_full_usage "\n\n" \ -- "Run PROG. When it finishes, its resource usage is displayed.\n" \ -+ "Run PROG, display resource usage when it exits\n" \ - "\nOptions:" \ - "\n -v Verbose" \ - - #define timeout_trivial_usage \ -- "[-t SECS] [-s SIG] PROG [ARGS]" -+ "[-t SECS] [-s SIG] PROG ARGS" - #define timeout_full_usage "\n\n" \ - "Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \ - "Defaults: SECS: 10, SIG: TERM." \ -@@ -4650,7 +4658,8 @@ - #define top_full_usage "\n\n" \ - "Provide a view of process activity in real time.\n" \ - "Read the status of all processes from /proc each SECONDS\n" \ -- "and show the status for however many processes will fit on the screen." \ -+ "and display a screenful of them." \ -+//TODO: add options and keyboard commands - - #define touch_trivial_usage \ - "[-c] [-d DATE] FILE [FILE]..." -@@ -4670,8 +4679,7 @@ - #define tr_trivial_usage \ - "[-cds] STRING1 [STRING2]" - #define tr_full_usage "\n\n" \ -- "Translate, squeeze, and/or delete characters from\n" \ -- "standard input, writing to standard output\n" \ -+ "Translate, squeeze, or delete characters from stdin, writing to stdout\n" \ - "\nOptions:" \ - "\n -c Take complement of STRING1" \ - "\n -d Delete input characters coded STRING1" \ -@@ -4693,7 +4701,7 @@ - ) \ - "\n -F Set the don't fragment bit" \ - "\n -I Use ICMP ECHO instead of UDP datagrams" \ -- "\n -l Display the ttl value of the returned packet" \ -+ "\n -l Display the TTL value of the returned packet" \ - "\n -d Set SO_DEBUG options to socket" \ - "\n -n Print numeric addresses" \ - "\n -r Bypass routing tables, send directly to HOST" \ -@@ -4701,7 +4709,7 @@ - "\n -m Max time-to-live (max number of hops)" \ - "\n -p Base UDP port number used in probes" \ - "\n (default 33434)" \ -- "\n -q Number of probes per 'ttl' (default 3)" \ -+ "\n -q Number of probes per TTL (default 3)" \ - "\n -s IP address to use as the source address" \ - "\n -t Type-of-service in probe packets (default 0)" \ - "\n -w Time in seconds to wait for a response (default 3)" \ -@@ -4721,7 +4729,7 @@ - "\n -m Max time-to-live (max number of hops)" \ - "\n -p Base UDP port number used in probes" \ - "\n (default is 33434)" \ -- "\n -q Number of probes per 'ttl' (default 3)" \ -+ "\n -q Number of probes per TTL (default 3)" \ - "\n -s IP address to use as the source address" \ - "\n -t Type-of-service in probe packets (default 0)" \ - "\n -w Time in seconds to wait for a response (default 3)" \ -@@ -4738,7 +4746,7 @@ - #define tty_trivial_usage \ - "" - #define tty_full_usage "\n\n" \ -- "Print file name of standard input's terminal" \ -+ "Print file name of stdin's terminal" \ - IF_INCLUDE_SUSv2( "\n" \ - "\nOptions:" \ - "\n -s Print nothing, only return exit status" \ -@@ -4750,7 +4758,7 @@ - #define ttysize_trivial_usage \ - "[w] [h]" - #define ttysize_full_usage "\n\n" \ -- "Print dimension(s) of standard input's terminal, on error return 80x25" -+ "Print dimension(s) of stdin's terminal, on error return 80x25" - - #define tunctl_trivial_usage \ - "[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]") -@@ -4894,7 +4902,7 @@ - "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" - - #define uncompress_trivial_usage \ -- "[-c] [-f] [FILE...]" -+ "[-c] [-f] [FILE]..." - #define uncompress_full_usage "\n\n" \ - "Uncompress .Z file[s]\n" \ - "\nOptions:" \ -@@ -4904,7 +4912,7 @@ - #define unexpand_trivial_usage \ - "[-f][-a][-t N] [FILE|-]" - #define unexpand_full_usage "\n\n" \ -- "Convert spaces to tabs, writing to standard output\n" \ -+ "Convert spaces to tabs, writing to stdout\n" \ - "\nOptions:" \ - IF_FEATURE_UNEXPAND_LONG_OPTIONS( \ - "\n -a,--all Convert all blanks" \ -@@ -5029,13 +5037,13 @@ - #define wall_trivial_usage \ - "[FILE]" - #define wall_full_usage "\n\n" \ -- "Write content of FILE or standard-input to all logged-in users" -+ "Write content of FILE or stdin to all logged-in users" - #define wall_sample_usage \ - "echo foo | wall\n" \ - "wall ./mymessage" - - #define watch_trivial_usage \ -- "[-n seconds] [-t] PROG [ARGS]" -+ "[-n SEC] [-t] PROG ARGS" - #define watch_full_usage "\n\n" \ - "Run PROG periodically\n" \ - "\nOptions:" \ -@@ -5062,8 +5070,8 @@ - #define wc_trivial_usage \ - "[OPTIONS] [FILE]..." - #define wc_full_usage "\n\n" \ -- "Print line, word, and byte counts for each FILE, and a total line if\n" \ -- "more than one FILE is specified. With no FILE, read standard input.\n" \ -+ "Print line, word, and byte counts for each FILE (or stdin),\n" \ -+ "and a total line if more than one FILE is specified\n" \ - "\nOptions:" \ - "\n -c Print the byte counts" \ - "\n -l Print the newline counts" \ -@@ -5078,7 +5086,7 @@ - IF_FEATURE_WGET_LONG_OPTIONS( \ - "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \ - " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \ -- " [-U|--user-agent agent] url" \ -+ " [--no-check-certificate] [-U|--user-agent agent] url" \ - ) \ - IF_NOT_FEATURE_WGET_LONG_OPTIONS( \ - "[-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url" \ -@@ -5115,9 +5123,9 @@ - "Print the user name associated with the current effective user id" - - #define xargs_trivial_usage \ -- "[OPTIONS] [PROG [ARGS]]" -+ "[OPTIONS] [PROG ARGS]" - #define xargs_full_usage "\n\n" \ -- "Run PROG on every item given by standard input\n" \ -+ "Run PROG on every item given by stdin\n" \ - "\nOptions:" \ - IF_FEATURE_XARGS_SUPPORT_CONFIRMATION( \ - "\n -p Ask user whether to run each command") \ diff --git a/package/busybox/busybox-1.16.0-wc.patch b/package/busybox/busybox-1.16.0-wc.patch deleted file mode 100644 index 5116fe23f7..0000000000 --- a/package/busybox/busybox-1.16.0-wc.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -urpN busybox-1.16.0/coreutils/wc.c busybox-1.16.0-wc/coreutils/wc.c ---- busybox-1.16.0/coreutils/wc.c 2010-03-08 22:49:32.000000000 +0100 -+++ busybox-1.16.0-wc/coreutils/wc.c 2010-03-08 22:51:29.310086707 +0100 -@@ -88,6 +88,8 @@ int wc_main(int argc UNUSED_PARAM, char - if (!argv[0]) { - *--argv = (char *) bb_msg_standard_input; - fname_fmt = "\n"; -+ } -+ if (!argv[1]) { /* zero or one filename? */ - if (!((print_type-1) & print_type)) /* exactly one option? */ - start_fmt = "%"COUNT_FMT; - } diff --git a/package/busybox/busybox-1.16.0-wget.patch b/package/busybox/busybox-1.16.0-wget.patch deleted file mode 100644 index 4750a005c1..0000000000 --- a/package/busybox/busybox-1.16.0-wget.patch +++ /dev/null @@ -1,20 +0,0 @@ -diff -urpN busybox-1.16.0/networking/wget.c busybox-1.16.0-wget/networking/wget.c ---- busybox-1.16.0/networking/wget.c 2010-01-25 01:59:38.000000000 +0100 -+++ busybox-1.16.0-wget/networking/wget.c 2010-02-21 01:53:53.000000000 +0100 -@@ -546,6 +546,8 @@ int wget_main(int argc UNUSED_PARAM, cha - "passive-ftp\0" No_argument "\xff" - "header\0" Required_argument "\xfe" - "post-data\0" Required_argument "\xfd" -+ /* Ignored (we don't do ssl) */ -+ "no-check-certificate\0" No_argument "\xfc" - ; - #endif - -@@ -590,6 +592,7 @@ int wget_main(int argc UNUSED_PARAM, cha - if (use_proxy) { - proxy = getenv(target.is_ftp ? "ftp_proxy" : "http_proxy"); - if (proxy && proxy[0]) { -+ server.user = NULL; - parse_url(proxy, &server); - } else { - use_proxy = 0;