From: Andrew Cagney Date: Thu, 12 Feb 1998 05:48:23 +0000 (+0000) Subject: Add a new target specific protocol `target d10v' implemented in X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=dd0ce8f668d9f7578b5d1882d1911998e7396191;p=binutils-gdb.git Add a new target specific protocol `target d10v' implemented in remote-d10v.c. It has an xfer_mem function that can translate a d10v GDB address into a d10v monitor address. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index c8ae70015bc..80ee6aa7506 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,19 @@ +Thu Feb 12 12:14:02 1998 Andrew Cagney + + * remote-d10v.c: New file. Layer the d10v GDB->remote memory map + on top of the remote serial memory transfer functions. + + * config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o + + * Makefile.in (remote-d10v.o): Add dependencies. + + * remote.c (remote_open_1): Add arg extended_p, engage extended + protocol when extended_p. + (remote_open, extended_remote_open): Pass !extended_p / + extended_p to remote_open_1. + + * remote.c (open_remote_target), target.h: New function. + Wed Feb 11 08:41:15 1998 Andrew Cagney * config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o. diff --git a/gdb/config/d10v/d10v.mt b/gdb/config/d10v/d10v.mt new file mode 100644 index 00000000000..e7578049880 --- /dev/null +++ b/gdb/config/d10v/d10v.mt @@ -0,0 +1,6 @@ +# Target: Mitsubishi D10V processor +TDEPFILES= d10v-tdep.o remote-d10v.o +TM_FILE= tm-d10v.h +SIM_OBS= remote-sim.o +SIM= ../sim/d10v/libsim.a -lm + diff --git a/gdb/remote.c b/gdb/remote.c index 1e23db1a18d..c1d8ec1cca6 100644 --- a/gdb/remote.c +++ b/gdb/remote.c @@ -227,7 +227,7 @@ static void remote_open PARAMS ((char *name, int from_tty)); static void extended_remote_open PARAMS ((char *name, int from_tty)); -static void remote_open_1 PARAMS ((char *, int, struct target_ops *)); +static void remote_open_1 PARAMS ((char *, int, struct target_ops *, int extended_p)); static void remote_close PARAMS ((int quitting)); @@ -243,10 +243,6 @@ static void extended_remote_create_inferior PARAMS ((char *, char *, char **)); static void remote_mourn_1 PARAMS ((struct target_ops *)); -static void getpkt PARAMS ((char *buf, int forever)); - -static int putpkt PARAMS ((char *buf)); - static void remote_send PARAMS ((char *buf)); static int readchar PARAMS ((int timeout)); @@ -257,8 +253,6 @@ static void remote_kill PARAMS ((void)); static int tohex PARAMS ((int nib)); -static int fromhex PARAMS ((int a)); - static void remote_detach PARAMS ((char *args, int from_tty)); static void remote_interrupt PARAMS ((int signo)); @@ -279,9 +273,18 @@ static int remote_insert_breakpoint PARAMS ((CORE_ADDR, char *)); static int remote_remove_breakpoint PARAMS ((CORE_ADDR, char *)); +static int hexnumlen PARAMS ((ULONGEST num)); + static struct target_ops remote_ops; /* Forward decl */ static struct target_ops extended_remote_ops; /* Forward decl */ +/* exported functions */ + +extern int fromhex PARAMS ((int a)); +extern void getpkt PARAMS ((char *buf, int forever)); +extern int putpkt PARAMS ((char *buf)); + + /* This was 5 seconds, which is a long time to sit and wait. Unless this is going though some terminal server or multiplexer or other form of hairy serial connection, I would think 2 seconds would @@ -332,7 +335,8 @@ static int remote_write_size = PBUFSIZ; /* This is the size (in chars) of the first response to the `g' command. This is used to limit the size of the memory read and write commands to prevent - stub buffers from overflowing. */ + stub buffers from overflowing. The size does not include headers and + trailers, it is only the payload size. */ static int remote_register_buf_size = 0; @@ -434,8 +438,8 @@ remote_close (quitting) static void get_offsets () { - char buf[PBUFSIZ]; - int nvals; + char buf[PBUFSIZ], *ptr; + int lose; CORE_ADDR text_addr, data_addr, bss_addr; struct section_offsets *offs; @@ -452,9 +456,43 @@ get_offsets () return; } - nvals = sscanf (buf, "Text=%lx;Data=%lx;Bss=%lx", &text_addr, &data_addr, - &bss_addr); - if (nvals != 3) + /* Pick up each field in turn. This used to be done with scanf, but + scanf will make trouble if CORE_ADDR size doesn't match + conversion directives correctly. The following code will work + with any size of CORE_ADDR. */ + text_addr = data_addr = bss_addr = 0; + ptr = buf; + lose = 0; + + if (strncmp (ptr, "Text=", 5) == 0) + { + ptr += 5; + /* Don't use strtol, could lose on big values. */ + while (*ptr && *ptr != ';') + text_addr = (text_addr << 4) + fromhex (*ptr++); + } + else + lose = 1; + + if (!lose && strncmp (ptr, ";Data=", 6) == 0) + { + ptr += 6; + while (*ptr && *ptr != ';') + data_addr = (data_addr << 4) + fromhex (*ptr++); + } + else + lose = 1; + + if (!lose && strncmp (ptr, ";Bss=", 5) == 0) + { + ptr += 5; + while (*ptr && *ptr != ';') + bss_addr = (bss_addr << 4) + fromhex (*ptr++); + } + else + lose = 1; + + if (lose) error ("Malformed response to offset query, %s", buf); if (symfile_objfile == NULL) @@ -511,7 +549,7 @@ remote_open (name, from_tty) char *name; int from_tty; { - remote_open_1 (name, from_tty, &remote_ops); + remote_open_1 (name, from_tty, &remote_ops, 0); } /* Open a connection to a remote debugger using the extended @@ -522,25 +560,18 @@ extended_remote_open (name, from_tty) char *name; int from_tty; { - char buf[PBUFSIZ]; - - /* Do the basic remote open stuff. */ - remote_open_1 (name, from_tty, &extended_remote_ops); - - /* Now tell the remote that we're using the extended protocol. */ - putpkt ("!"); - getpkt (buf, 0); - + remote_open_1 (name, from_tty, &extended_remote_ops, 1/*extended_p*/); } /* Generic code for opening a connection to a remote target. */ static DCACHE *remote_dcache; static void -remote_open_1 (name, from_tty, target) +remote_open_1 (name, from_tty, target, extended_p) char *name; int from_tty; struct target_ops *target; + int extended_p; { if (name == 0) error ("To open a remote debug connection, you need to specify what serial\n\ @@ -602,6 +633,15 @@ device is attached to the remote system (e.g. /dev/ttya)."); if (!catch_errors (remote_start_remote, (char *)0, "Couldn't establish connection to remote target\n", RETURN_MASK_ALL)) pop_target(); + + + if (extended_p) + { + /* tell the remote that we're using the extended protocol. */ + char buf[PBUFSIZ]; + putpkt ("!"); + getpkt (buf, 0); + } } /* This takes a program previously attached to and detaches it. After @@ -630,7 +670,7 @@ remote_detach (args, from_tty) /* Convert hex digit A to a number. */ -static int +int fromhex (a) int a; { @@ -638,6 +678,8 @@ fromhex (a) return a - '0'; else if (a >= 'a' && a <= 'f') return a - 'a' + 10; + else if (a >= 'A' && a <= 'F') + return a - 'A' + 10; else error ("Reply contains invalid hex digit %d", a); } @@ -748,6 +790,25 @@ Give up (and stop debugging it)? ")) /* If nonzero, ignore the next kill. */ int kill_kludge; +void +remote_console_output (msg) + char *msg; +{ + char *p; + + for (p = msg; *p; p +=2) + { + char tb[2]; + char c = fromhex (p[0]) * 16 + fromhex (p[1]); + tb[0] = c; + tb[1] = 0; + if (target_output_hook) + target_output_hook (tb); + else + fputs_filtered (tb, gdb_stdout); + } +} + /* Wait until the remote machine stops, then return, storing status in STATUS just as `wait' would. Returns "pid" (though it's not clear what, if anything, that @@ -794,7 +855,6 @@ remote_wait (pid, status) n... = register number r... = register contents */ - p = &buf[3]; /* after Txx */ while (*p) @@ -868,17 +928,7 @@ Packet: '%s'\n", goto got_status; case 'O': /* Console output */ - for (p = buf + 1; *p; p +=2) - { - char tb[2]; - char c = fromhex (p[0]) * 16 + fromhex (p[1]); - tb[0] = c; - tb[1] = 0; - if (target_output_hook) - target_output_hook (tb); - else - fputs_filtered (tb, gdb_stdout); - } + remote_console_output (buf + 1); continue; case '\0': if (last_sent_signal != TARGET_SIGNAL_0) @@ -1106,7 +1156,7 @@ hexnumlen (num) for (i = 0; num != 0; i++) num >>= 4; - return min (i, 1); + return max (i, 1); } /* Write memory data directly to the remote machine. @@ -1129,12 +1179,11 @@ remote_write_bytes (memaddr, myaddr, len) /* Chop the transfer down if necessary */ max_buf_size = min (remote_write_size, PBUFSIZ); - max_buf_size = min (max_buf_size, remote_register_buf_size); + if (remote_register_buf_size != 0) + max_buf_size = min (max_buf_size, remote_register_buf_size); -#define PACKET_OVERHEAD (1 + 1 + 1 + 2) /* $x#xx - Overhead for all types of packets */ - - /* packet overhead + ,: */ - max_buf_size -= PACKET_OVERHEAD + hexnumlen (memaddr + len - 1) + 1 + hexnumlen (len) + 1; + /* Subtract header overhead from max payload size - $M,:#nn */ + max_buf_size -= 2 + hexnumlen (memaddr + len - 1) + 1 + hexnumlen (len) + 4; origlen = len; while (len > 0) @@ -1200,10 +1249,8 @@ remote_read_bytes (memaddr, myaddr, len) /* Chop the transfer down if necessary */ max_buf_size = min (remote_write_size, PBUFSIZ); - max_buf_size = min (max_buf_size, remote_register_buf_size); - - /* packet overhead */ - max_buf_size -= PACKET_OVERHEAD; + if (remote_register_buf_size != 0) + max_buf_size = min (max_buf_size, remote_register_buf_size); origlen = len; while (len > 0) @@ -1393,7 +1440,7 @@ remote_send (buf) /* Send a packet to the remote machine, with error checking. The data of the packet is in BUF. */ -static int +int putpkt (buf) char *buf; { @@ -1601,7 +1648,7 @@ read_frame (buf) If FOREVER, wait forever rather than timing out; this is used while the target is executing user code. */ -static void +void getpkt (buf, forever) char *buf; int forever; @@ -1664,7 +1711,7 @@ getpkt (buf, forever) if (val == 1) { if (remote_debug) - fprintf_unfiltered (gdb_stderr, "Packet received: %s\n", buf); + fprintf_unfiltered (gdb_stdout, "Packet received: %s\n", buf); SERIAL_WRITE (remote_desc, "+", 1); return; } @@ -1949,6 +1996,21 @@ push_remote_target (name, from_tty) remote_open (name, from_tty); } +/* Other targets want to use the entire remote serial module but with + certain remote_ops overridden. */ + +void +open_remote_target (name, from_tty, target, extended_p) + char *name; + int from_tty; + struct target_ops *target; + int extended_p; +{ + printf_filtered ("Selecting the %sremote protocol\n", + (extended_p ? "extended-" : "")); + remote_open_1 (name, from_tty, target, extended_p); +} + void _initialize_remote () { diff --git a/gdb/target.h b/gdb/target.h index dfc5fed795a..a7e11e2863f 100644 --- a/gdb/target.h +++ b/gdb/target.h @@ -177,7 +177,7 @@ enum target_signal { TARGET_SIGNAL_REALTIME_61 = 73, TARGET_SIGNAL_REALTIME_62 = 74, TARGET_SIGNAL_REALTIME_63 = 75, - +#if defined(MACH) || defined(__MACH__) /* Mach exceptions */ TARGET_EXC_BAD_ACCESS = 76, TARGET_EXC_BAD_INSTRUCTION = 77, @@ -185,7 +185,7 @@ enum target_signal { TARGET_EXC_EMULATION = 79, TARGET_EXC_SOFTWARE = 80, TARGET_EXC_BREAKPOINT = 81, - +#endif /* Some signal we don't know about. */ TARGET_SIGNAL_UNKNOWN, @@ -563,7 +563,7 @@ print_section_info PARAMS ((struct target_ops *, bfd *)); should act like SIGSTOP). This function is normally used by GUIs to implement a stop button. */ -#define target_stop() current_target.to_stop () +#define target_stop current_target.to_stop /* Pointer to next target in the chain, e.g. a core file and an exec file. */ @@ -782,6 +782,10 @@ extern enum target_signal target_signal_from_command PARAMS ((int)); /* Any target can call this to switch to remote protocol (in remote.c). */ extern void push_remote_target PARAMS ((char *name, int from_tty)); + +/* Any target cah call this to open using the remote protocol */ +extern void open_remote_target PARAMS ((char *name, int from_tty, struct target_ops *target, int extended_p)); + /* Imported from machine dependent code */