From: Alex Deucher Date: Tue, 13 May 2008 19:46:23 +0000 (-0400) Subject: R3xx: clean up ZB registers X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=de3fc8b1c47eaa87917e1886d4a0988327438038;p=mesa.git R3xx: clean up ZB registers --- diff --git a/src/mesa/drivers/dri/r300/r300_cmdbuf.c b/src/mesa/drivers/dri/r300/r300_cmdbuf.c index 0de1190e9fa..a41dee50ff7 100644 --- a/src/mesa/drivers/dri/r300/r300_cmdbuf.c +++ b/src/mesa/drivers/dri/r300/r300_cmdbuf.c @@ -465,20 +465,20 @@ void r300InitCmdBuf(r300ContextPtr r300) r300->hw.rb3d_discard_src_pixel_lte_threshold.cmd[0] = cmdpacket0(R500_RB3D_DISCARD_SRC_PIXEL_LTE_THRESHOLD, 2); ALLOC_STATE(zs, always, R300_ZS_CMDSIZE, 0); r300->hw.zs.cmd[R300_ZS_CMD_0] = - cmdpacket0(R300_RB3D_ZSTENCIL_CNTL_0, 3); + cmdpacket0(R300_ZB_CNTL, 3); ALLOC_STATE(zstencil_format, always, 5, 0); r300->hw.zstencil_format.cmd[0] = - cmdpacket0(ZB_FORMAT, 4); + cmdpacket0(R300_ZB_FORMAT, 4); ALLOC_STATE(zb, always, R300_ZB_CMDSIZE, 0); - r300->hw.zb.cmd[R300_ZB_CMD_0] = cmdpacket0(ZB_DEPTHOFFSET, 2); + r300->hw.zb.cmd[R300_ZB_CMD_0] = cmdpacket0(R300_ZB_DEPTHOFFSET, 2); ALLOC_STATE(zb_depthclearvalue, always, 2, 0); - r300->hw.zb_depthclearvalue.cmd[0] = cmdpacket0(ZB_DEPTHCLEARVALUE, 1); + r300->hw.zb_depthclearvalue.cmd[0] = cmdpacket0(R300_ZB_DEPTHCLEARVALUE, 1); ALLOC_STATE(unk4F30, always, 3, 0); r300->hw.unk4F30.cmd[0] = cmdpacket0(0x4F30, 2); ALLOC_STATE(zb_hiz_offset, always, 2, 0); - r300->hw.zb_hiz_offset.cmd[0] = cmdpacket0(ZB_HIZ_OFFSET, 1); + r300->hw.zb_hiz_offset.cmd[0] = cmdpacket0(R300_ZB_HIZ_OFFSET, 1); ALLOC_STATE(zb_hiz_pitch, always, 2, 0); - r300->hw.zb_hiz_pitch.cmd[0] = cmdpacket0(ZB_HIZ_PITCH, 1); + r300->hw.zb_hiz_pitch.cmd[0] = cmdpacket0(R300_ZB_HIZ_PITCH, 1); /* VPU only on TCL */ if (has_tcl) { diff --git a/src/mesa/drivers/dri/r300/r300_emit.c b/src/mesa/drivers/dri/r300/r300_emit.c index 18d9ff2facc..2ea17ad0a7c 100644 --- a/src/mesa/drivers/dri/r300/r300_emit.c +++ b/src/mesa/drivers/dri/r300/r300_emit.c @@ -553,7 +553,7 @@ void r300EmitCacheFlush(r300ContextPtr rmesa) e32(R300_RB3D_DSTCACHE_CTLSTAT_DC_FREE_FREE_3D_TAGS | R300_RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_FLUSH_DIRTY_3D); - reg_start(ZB_ZCACHE_CTLSTAT, 0); - e32(ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE | - ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE); + reg_start(R300_ZB_ZCACHE_CTLSTAT, 0); + e32(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE | + R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE); } diff --git a/src/mesa/drivers/dri/r300/r300_ioctl.c b/src/mesa/drivers/dri/r300/r300_ioctl.c index 3863a540314..bf12c2cfbfc 100644 --- a/src/mesa/drivers/dri/r300/r300_ioctl.c +++ b/src/mesa/drivers/dri/r300/r300_ioctl.c @@ -118,7 +118,7 @@ static void r300ClearBuffer(r300ContextPtr r300, int flags, int buffer) } R300_STATECHANGE(r300, zs); - reg_start(R300_RB3D_ZSTENCIL_CNTL_0, 2); + reg_start(R300_ZB_CNTL, 2); { uint32_t t1, t2; @@ -127,32 +127,32 @@ static void r300ClearBuffer(r300ContextPtr r300, int flags, int buffer) t2 = 0x0; if (flags & CLEARBUFFER_DEPTH) { - t1 |= R300_RB3D_Z_WRITE_ONLY; + t1 |= R300_Z_ENABLE | R300_Z_WRITE_ENABLE; t2 |= - (R300_ZS_ALWAYS << R300_RB3D_ZS1_DEPTH_FUNC_SHIFT); - } else { - t1 |= R300_RB3D_Z_DISABLED_1; // disable + (R300_ZS_ALWAYS << R300_Z_FUNC_SHIFT); + } else { //XXX + t1 |= R300_STENCIL_FRONT_BACK; // disable } if (flags & CLEARBUFFER_STENCIL) { - t1 |= R300_RB3D_STENCIL_ENABLE; + t1 |= R300_STENCIL_ENABLE; t2 |= (R300_ZS_ALWAYS << - R300_RB3D_ZS1_FRONT_FUNC_SHIFT) | + R300_S_FRONT_FUNC_SHIFT) | (R300_ZS_REPLACE << - R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT) | + R300_S_FRONT_SFAIL_OP_SHIFT) | (R300_ZS_REPLACE << - R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT) | + R300_S_FRONT_ZPASS_OP_SHIFT) | (R300_ZS_REPLACE << - R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT) | + R300_S_FRONT_ZFAIL_OP_SHIFT) | (R300_ZS_ALWAYS << - R300_RB3D_ZS1_BACK_FUNC_SHIFT) | + R300_S_BACK_FUNC_SHIFT) | (R300_ZS_REPLACE << - R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT) | + R300_S_BACK_SFAIL_OP_SHIFT) | (R300_ZS_REPLACE << - R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT) | + R300_S_BACK_ZPASS_OP_SHIFT) | (R300_ZS_REPLACE << - R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT); + R300_S_BACK_ZFAIL_OP_SHIFT); } e32(t1); diff --git a/src/mesa/drivers/dri/r300/r300_reg.h b/src/mesa/drivers/dri/r300/r300_reg.h index 777b6225df6..bf61cd4abf0 100644 --- a/src/mesa/drivers/dri/r300/r300_reg.h +++ b/src/mesa/drivers/dri/r300/r300_reg.h @@ -2279,19 +2279,14 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * for this. * Bit (1<<8) is the "test" bit. so plain write is 6 - vd */ -#define R300_RB3D_ZSTENCIL_CNTL_0 0x4F00 -# define R300_RB3D_Z_DISABLED_1 0x00000010 -# define R300_RB3D_Z_DISABLED_2 0x00000014 -# define R300_RB3D_Z_TEST 0x00000012 -# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 - -# define R300_RB3D_Z_TEST 0x00000012 -# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 -# define R300_RB3D_STENCIL_ENABLE 0x00000001 - -#define R300_RB3D_ZSTENCIL_CNTL_1 0x4f04 +#define R300_ZB_CNTL 0x4F00 +# define R300_STENCIL_ENABLE (1 << 0) +# define R300_Z_ENABLE (1 << 1) +# define R300_Z_WRITE_ENABLE (1 << 2) +# define R300_Z_SIGNED_COMPARE (1 << 3) +# define R300_STENCIL_FRONT_BACK (1 << 4) + +#define R300_ZB_ZSTENCILCNTL 0x4f04 /* functions */ # define R300_ZS_NEVER 0 # define R300_ZS_LESS 1 @@ -2311,51 +2306,49 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_ZS_INVERT 5 # define R300_ZS_INCR_WRAP 6 # define R300_ZS_DECR_WRAP 7 +# define R300_Z_FUNC_SHIFT 0 /* front and back refer to operations done for front and back faces, i.e. separate stencil function support */ -# define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT 0 -# define R300_RB3D_ZS1_FRONT_FUNC_SHIFT 3 -# define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT 6 -# define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT 9 -# define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT 12 -# define R300_RB3D_ZS1_BACK_FUNC_SHIFT 15 -# define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT 18 -# define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT 21 -# define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT 24 - -#define ZB_STENCILREFMASK 0x4f08 -# define ZB_STENCILREFMASK_STENCILREF_SHIFT 0 -# define ZB_STENCILREFMASK_STENCIL_MASK 0xff -# define ZB_STENCILREFMASK_STENCILREF_MASK 0x000000ff -# define ZB_STENCILREFMASK_STENCILMASK_SHIFT 8 -# define ZB_STENCILREFMASK_STENCILMASK_MASK 0x0000ff00 -# define ZB_STENCILREFMASK_STENCILWRITEMASK_SHIFT 16 -# define ZB_STENCILREFMASK_STENCILWRITEMASK_MASK 0xffff0000 +# define R300_S_FRONT_FUNC_SHIFT 3 +# define R300_S_FRONT_SFAIL_OP_SHIFT 6 +# define R300_S_FRONT_ZPASS_OP_SHIFT 9 +# define R300_S_FRONT_ZFAIL_OP_SHIFT 12 +# define R300_S_BACK_FUNC_SHIFT 15 +# define R300_S_BACK_SFAIL_OP_SHIFT 18 +# define R300_S_BACK_ZPASS_OP_SHIFT 21 +# define R300_S_BACK_ZFAIL_OP_SHIFT 24 + +#define R300_ZB_STENCILREFMASK 0x4f08 +# define R300_STENCILREF_SHIFT 0 +# define R300_STENCILREF_MASK 0x000000ff +# define R300_STENCILMASK_SHIFT 8 +# define R300_STENCILMASK_MASK 0x0000ff00 +# define R300_STENCILWRITEMASK_SHIFT 16 +# define R300_STENCILWRITEMASK_MASK 0x00ff0000 /* gap */ -#define ZB_FORMAT 0x4f10 -# define ZB_FORMAR_DEPTHFORMAT_16BIT_INT_Z (0 << 0) -# define ZB_FORMAR_DEPTHFORMAT_16BIT_13E3 (1 << 0) -# define ZB_FORMAR_DEPTHFORMAT_24BIT_INT_Z (2 << 0) +#define R300_ZB_FORMAT 0x4f10 +# define R300_DEPTHFORMAT_16BIT_INT_Z (0 << 0) +# define R300_DEPTHFORMAT_16BIT_13E3 (1 << 0) +# define R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL (2 << 0) /* reserved up to (15 << 0) */ -# define ZB_FORMAR_INVERT_13E3_LEADING_ONES (0 << 4) -# define ZB_FORMAR_INVERT_13E3_LEADING_ZEROS (1 << 4) -# define ZB_FORMAR_PEQ8_UNUSED (1 << 5) +# define R300_INVERT_13E3_LEADING_ONES (0 << 4) +# define R300_INVERT_13E3_LEADING_ZEROS (1 << 4) -#define R300_RB3D_EARLY_Z 0x4F14 -# define R300_EARLY_Z_DISABLE (0 << 0) -# define R300_EARLY_Z_ENABLE (1 << 0) +#define R300_ZB_ZTOP 0x4F14 +# define R300_ZTOP_DISABLE (0 << 0) +# define R300_ZTOP_ENABLE (1 << 0) /* gap */ -#define ZB_ZCACHE_CTLSTAT 0x4f18 -# define ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT (0 << 0) -# define ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0) -# define ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT (0 << 1) -# define ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE (1 << 1) -# define ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE (0 << 31) -# define ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY (1 << 31) +#define R300_ZB_ZCACHE_CTLSTAT 0x4f18 +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT (0 << 0) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT (0 << 1) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE (1 << 1) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE (0 << 31) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY (1 << 31) #define R300_ZB_BW_CNTL 0x4f1c # define R300_HIZ_DISABLE (0 << 0) @@ -2372,31 +2365,32 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_ZB_CB_CLEAR_CACHE_LINEAR (1 << 5) # define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6) # define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6) -# define R300_ZEQUAL_OPTIMIZE_ENABLE (0 << 7) -# define R300_ZEQUAL_OPTIMIZE_DISABLE (1 << 7) -# define R300_SEQUAL_OPTIMIZE_ENABLE (0 << 8) -# define R300_SEQUAL_OPTIMIZE_DISABLE (1 << 8) -/* gap in AMD docs */ -# define R300_BMASK_ENABLE (0 << 10) -# define R300_BMASK_DISABLE (1 << 10) -# define R300_HIZ_EQUAL_REJECT_DISABLE (0 << 11) -# define R300_HIZ_EQUAL_REJECT_ENABLE (1 << 11) -# define R300_HIZ_FP_EXP_BITS_DISABLE (0 << 12) -# define R300_HIZ_FP_EXP_BITS_1 (1 << 12) -# define R300_HIZ_FP_EXP_BITS_2 (2 << 12) -# define R300_HIZ_FP_EXP_BITS_3 (3 << 12) -# define R300_HIZ_FP_EXP_BITS_4 (4 << 12) -# define R300_HIZ_FP_EXP_BITS_5 (5 << 12) -# define R300_HIZ_FP_INVERT_LEADING_ONES (0 << 15) -# define R300_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15) -# define R300_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16) -# define R300_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16) -# define R300_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17) -# define R300_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17) -# define R300_PEQ_PACKING_DISABLE (0 << 18) -# define R300_PEQ_PACKING_ENABLE (1 << 18) -# define R300_COVERED_PTR_MASKING_DISABLE (0 << 18) -# define R300_COVERED_PTR_MASKING_ENABLE (1 << 18) + +# define R500_ZEQUAL_OPTIMIZE_ENABLE (0 << 7) +# define R500_ZEQUAL_OPTIMIZE_DISABLE (1 << 7) +# define R500_SEQUAL_OPTIMIZE_ENABLE (0 << 8) +# define R500_SEQUAL_OPTIMIZE_DISABLE (1 << 8) + +# define R500_BMASK_ENABLE (0 << 10) +# define R500_BMASK_DISABLE (1 << 10) +# define R500_HIZ_EQUAL_REJECT_DISABLE (0 << 11) +# define R500_HIZ_EQUAL_REJECT_ENABLE (1 << 11) +# define R500_HIZ_FP_EXP_BITS_DISABLE (0 << 12) +# define R500_HIZ_FP_EXP_BITS_1 (1 << 12) +# define R500_HIZ_FP_EXP_BITS_2 (2 << 12) +# define R500_HIZ_FP_EXP_BITS_3 (3 << 12) +# define R500_HIZ_FP_EXP_BITS_4 (4 << 12) +# define R500_HIZ_FP_EXP_BITS_5 (5 << 12) +# define R500_HIZ_FP_INVERT_LEADING_ONES (0 << 15) +# define R500_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15) +# define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16) +# define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16) +# define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17) +# define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17) +# define R500_PEQ_PACKING_DISABLE (0 << 18) +# define R500_PEQ_PACKING_ENABLE (1 << 18) +# define R500_COVERED_PTR_MASKING_DISABLE (0 << 18) +# define R500_COVERED_PTR_MASKING_ENABLE (1 << 18) /* gap */ @@ -2404,67 +2398,68 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. /* Z Buffer Address Offset. * Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles. */ -#define ZB_DEPTHOFFSET 0x4f20 +#define R300_ZB_DEPTHOFFSET 0x4f20 /* Z Buffer Pitch and Endian Control */ -#define ZB_DEPTHPITCH 0x4f24 -# define R300_DEPTHPITCH_MASK 0x00001FF8 /* TODO: should be (13:2) */ -# define ZB_DEPTHPITCH_DEPTHMACROTILE_DISABLE (0 << 16) -# define ZB_DEPTHPITCH_DEPTHMACROTILE_ENABLE (1 << 16) -# define ZB_DEPTHPITCH_DEPTHMICROTILE_LINEAR (0 << 17) -# define ZB_DEPTHPITCH_DEPTHMICROTILE_TILED (1 << 17) -# define ZB_DEPTHPITCH_DEPTHMICROTILE_TILED_SQUARE (2 << 17) -# define ZB_DEPTHPITCH_DEPTHENDIAN_NO_SWAP (0 << 18) -# define ZB_DEPTHPITCH_DEPTHENDIAN_WORD_SWAP (1 << 18) -# define ZB_DEPTHPITCH_DEPTHENDIAN_DWORD_SWAP (2 << 18) -# define ZB_DEPTHPITCH_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18) +#define R300_ZB_DEPTHPITCH 0x4f24 +# define R300_DEPTHPITCH_MASK 0x00003FFC +# define R300_DEPTHMACROTILE_DISABLE (0 << 16) +# define R300_DEPTHMACROTILE_ENABLE (1 << 16) +# define R300_DEPTHMICROTILE_LINEAR (0 << 17) +# define R300_DEPTHMICROTILE_TILED (1 << 17) +# define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17) +# define R300_DEPTHENDIAN_NO_SWAP (0 << 18) +# define R300_DEPTHENDIAN_WORD_SWAP (1 << 18) +# define R300_DEPTHENDIAN_DWORD_SWAP (2 << 18) +# define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18) /* Z Buffer Clear Value */ -#define ZB_DEPTHCLEARVALUE 0x4f28 +#define R300_ZB_DEPTHCLEARVALUE 0x4f28 /* Hierarchical Z Memory Offset */ -#define ZB_HIZ_OFFSET 0x4f44 +#define R300_ZB_HIZ_OFFSET 0x4f44 -/* Hierarchical Z Read Index */ -#define ZB_HIZ_RDINDEX 0x4f48 +/* Hierarchical Z Write Index */ +#define R300_ZB_HIZ_WRINDEX 0x4f48 /* Hierarchical Z Data */ -#define ZB_HIZ_DWORD 0x4f4c +#define R300_ZB_HIZ_DWORD 0x4f4c -/* Hierarchical Z Write Index */ -#define ZB_HIZ_WRINDEX 0x4f50 +/* Hierarchical Z Read Index */ +#define R300_ZB_HIZ_RDINDEX 0x4f50 /* Hierarchical Z Pitch */ -#define ZB_HIZ_PITCH 0x4f54 +#define R300_ZB_HIZ_PITCH 0x4f54 /* Z Buffer Z Pass Counter Data */ -#define ZB_ZPASS_DATA 0x4f58 +#define R300_ZB_ZPASS_DATA 0x4f58 /* Z Buffer Z Pass Counter Address */ -#define ZB_ZPASS_ADDR 0x4f5c +#define R300_ZB_ZPASS_ADDR 0x4f5c /* Depth buffer X and Y coordinate offset */ -#define ZB_DEPTHXY_OFFSET 0x4f60 -# define ZB_DEPTHX_OFFSET_SHIFT 1 -# define ZB_DEPTHX_OFFSET_MASK 0x000007FE -# define ZB_DEPTHY_OFFSET_SHIFT 17 -# define ZB_DEPTHY_OFFSET_MASK 0x07FE0000 +#define R300_ZB_DEPTHXY_OFFSET 0x4f60 +# define R300_DEPTHX_OFFSET_SHIFT 1 +# define R300_DEPTHX_OFFSET_MASK 0x000007FE +# define R300_DEPTHY_OFFSET_SHIFT 17 +# define R300_DEPTHY_OFFSET_MASK 0x07FE0000 /* Sets the fifo sizes */ -#define ZB_FIFO_SIZE 0x4fd0 -# define ZB_FIFO_SIZE_OP_FIFO_SIZE_FULL (0 << 0) -# define ZB_FIFO_SIZE_OP_FIFO_SIZE_HALF (1 << 0) -# define ZB_FIFO_SIZE_OP_FIFO_SIZE_QUATER (2 << 0) -# define ZB_FIFO_SIZE_OP_FIFO_SIZE_EIGTHS (4 << 0) +#define R500_ZB_FIFO_SIZE 0x4fd0 +# define R500_OP_FIFO_SIZE_FULL (0 << 0) +# define R500_OP_FIFO_SIZE_HALF (1 << 0) +# define R500_OP_FIFO_SIZE_QUATER (2 << 0) +# define R500_OP_FIFO_SIZE_EIGTHS (4 << 0) /* Stencil Reference Value and Mask for backfacing quads */ -#define ZB_STENCILREFMASK_BF 0x4fd4 -# define ZB_STENCILREFMASK_BF_STENCILREF_SHIFT 0 -# define ZB_STENCILREFMASK_BF_STENCILREF_MASK 0x000000ff -# define ZB_STENCILREFMASK_BF_STENCILMASK_SHIFT 8 -# define ZB_STENCILREFMASK_BF_STENCILMASK_MASK 0x0000ff00 -# define ZB_STENCILREFMASK_BF_STENCILWRITEMASK_SHIFT 16 -# define ZB_STENCILREFMASK_BF_STENCILWRITEMASK_MASK 0xffff0000 +/* R300_ZB_STENCILREFMASK handles front face */ +#define R500_ZB_STENCILREFMASK_BF 0x4fd4 +# define R500_STENCILREF_SHIFT 0 +# define R500_STENCILREF_MASK 0x000000ff +# define R500_STENCILMASK_SHIFT 8 +# define R500_STENCILMASK_MASK 0x0000ff00 +# define R500_STENCILWRITEMASK_SHIFT 16 +# define R500_STENCILWRITEMASK_MASK 0x00ff0000 /** * \defgroup R3XX_R5XX_PROGRAMMABLE_VERTEX_SHADER_DESCRIPTION R3XX-R5XX PROGRAMMABLE VERTEX SHADER DESCRIPTION diff --git a/src/mesa/drivers/dri/r300/r300_state.c b/src/mesa/drivers/dri/r300/r300_state.c index 69c672e2861..178e4a7c00d 100644 --- a/src/mesa/drivers/dri/r300/r300_state.c +++ b/src/mesa/drivers/dri/r300/r300_state.c @@ -415,10 +415,10 @@ static void r300SetEarlyZState(GLcontext * ctx) R300_STATECHANGE(r300, zstencil_format); switch (ctx->Visual.depthBits) { case 16: - r300->hw.zstencil_format.cmd[1] = ZB_FORMAR_DEPTHFORMAT_16BIT_INT_Z; + r300->hw.zstencil_format.cmd[1] = R300_DEPTHFORMAT_16BIT_INT_Z; break; case 24: - r300->hw.zstencil_format.cmd[1] = ZB_FORMAR_DEPTHFORMAT_24BIT_INT_Z; + r300->hw.zstencil_format.cmd[1] = R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL; break; default: fprintf(stderr, "Error: Unsupported depth %d... exiting\n", ctx->Visual.depthBits); @@ -427,14 +427,14 @@ static void r300SetEarlyZState(GLcontext * ctx) if (ctx->Color.AlphaEnabled && ctx->Color.AlphaFunc != GL_ALWAYS) /* disable early Z */ - r300->hw.zstencil_format.cmd[2] = R300_EARLY_Z_DISABLE; + r300->hw.zstencil_format.cmd[2] = R300_ZTOP_DISABLE; else { if (ctx->Depth.Test && ctx->Depth.Func != GL_NEVER) /* enable early Z */ - r300->hw.zstencil_format.cmd[2] = R300_EARLY_Z_ENABLE; + r300->hw.zstencil_format.cmd[2] = R300_ZTOP_ENABLE; else /* disable early Z */ - r300->hw.zstencil_format.cmd[2] = R300_EARLY_Z_DISABLE; + r300->hw.zstencil_format.cmd[2] = R300_ZTOP_DISABLE; } r300->hw.zstencil_format.cmd[3] = 0x00000003; @@ -527,24 +527,24 @@ static void r300SetDepthState(GLcontext * ctx) r300ContextPtr r300 = R300_CONTEXT(ctx); R300_STATECHANGE(r300, zs); - r300->hw.zs.cmd[R300_ZS_CNTL_0] &= R300_RB3D_STENCIL_ENABLE; + r300->hw.zs.cmd[R300_ZS_CNTL_0] &= R300_STENCIL_ENABLE; // XXX r300->hw.zs.cmd[R300_ZS_CNTL_1] &= - ~(R300_ZS_MASK << R300_RB3D_ZS1_DEPTH_FUNC_SHIFT); + ~(R300_ZS_MASK << R300_Z_FUNC_SHIFT); if (ctx->Depth.Test && ctx->Depth.Func != GL_NEVER) { if (ctx->Depth.Mask) r300->hw.zs.cmd[R300_ZS_CNTL_0] |= - R300_RB3D_Z_TEST_AND_WRITE; + R300_Z_ENABLE | R300_Z_WRITE_ENABLE | R300_STENCIL_FRONT_BACK; // XXX else - r300->hw.zs.cmd[R300_ZS_CNTL_0] |= R300_RB3D_Z_TEST; + r300->hw.zs.cmd[R300_ZS_CNTL_0] |= R300_Z_ENABLE | R300_STENCIL_FRONT_BACK; // XXX r300->hw.zs.cmd[R300_ZS_CNTL_1] |= translate_func(ctx->Depth. - Func) << R300_RB3D_ZS1_DEPTH_FUNC_SHIFT; + Func) << R300_Z_FUNC_SHIFT; } else { - r300->hw.zs.cmd[R300_ZS_CNTL_0] |= R300_RB3D_Z_DISABLED_1; + r300->hw.zs.cmd[R300_ZS_CNTL_0] |= R300_STENCIL_FRONT_BACK; // XXX r300->hw.zs.cmd[R300_ZS_CNTL_1] |= - translate_func(GL_NEVER) << R300_RB3D_ZS1_DEPTH_FUNC_SHIFT; + translate_func(GL_NEVER) << R300_Z_FUNC_SHIFT; } r300SetEarlyZState(ctx); @@ -558,10 +558,10 @@ static void r300SetStencilState(GLcontext * ctx, GLboolean state) R300_STATECHANGE(r300, zs); if (state) { r300->hw.zs.cmd[R300_ZS_CNTL_0] |= - R300_RB3D_STENCIL_ENABLE; + R300_STENCIL_ENABLE; } else { r300->hw.zs.cmd[R300_ZS_CNTL_0] &= - ~R300_RB3D_STENCIL_ENABLE; + ~R300_STENCIL_ENABLE; } } else { #if R200_MERGED @@ -916,36 +916,36 @@ static void r300StencilFuncSeparate(GLcontext * ctx, GLenum face, r300ContextPtr rmesa = R300_CONTEXT(ctx); GLuint refmask = (((ctx->Stencil. - Ref[0] & 0xff) << ZB_STENCILREFMASK_STENCILREF_SHIFT) | ((ctx-> - Stencil. - ValueMask - [0] & - 0xff) - << - ZB_STENCILREFMASK_STENCILMASK_SHIFT)); + Ref[0] & 0xff) << R300_STENCILREF_SHIFT) | ((ctx-> + Stencil. + ValueMask + [0] & + 0xff) + << + R300_STENCILMASK_SHIFT)); GLuint flag; R300_STATECHANGE(rmesa, zs); rmesa->hw.zs.cmd[R300_ZS_CNTL_1] &= ~((R300_ZS_MASK << - R300_RB3D_ZS1_FRONT_FUNC_SHIFT) + R300_S_FRONT_FUNC_SHIFT) | (R300_ZS_MASK << - R300_RB3D_ZS1_BACK_FUNC_SHIFT)); + R300_S_BACK_FUNC_SHIFT)); rmesa->hw.zs.cmd[R300_ZS_CNTL_2] &= - ~((ZB_STENCILREFMASK_STENCIL_MASK << ZB_STENCILREFMASK_STENCILREF_SHIFT) | - (ZB_STENCILREFMASK_STENCIL_MASK << ZB_STENCILREFMASK_STENCILMASK_SHIFT)); + ~((R300_STENCILREF_MASK << R300_STENCILREF_SHIFT) | + (R300_STENCILREF_MASK << R300_STENCILMASK_SHIFT)); flag = translate_func(ctx->Stencil.Function[0]); rmesa->hw.zs.cmd[R300_ZS_CNTL_1] |= - (flag << R300_RB3D_ZS1_FRONT_FUNC_SHIFT); + (flag << R300_S_FRONT_FUNC_SHIFT); if (ctx->Stencil._TestTwoSide) flag = translate_func(ctx->Stencil.Function[1]); rmesa->hw.zs.cmd[R300_ZS_CNTL_1] |= - (flag << R300_RB3D_ZS1_BACK_FUNC_SHIFT); + (flag << R300_S_BACK_FUNC_SHIFT); rmesa->hw.zs.cmd[R300_ZS_CNTL_2] |= refmask; } @@ -955,12 +955,12 @@ static void r300StencilMaskSeparate(GLcontext * ctx, GLenum face, GLuint mask) R300_STATECHANGE(rmesa, zs); rmesa->hw.zs.cmd[R300_ZS_CNTL_2] &= - ~(ZB_STENCILREFMASK_STENCIL_MASK << - ZB_STENCILREFMASK_STENCILWRITEMASK_SHIFT); + ~(R300_STENCILREF_MASK << + R300_STENCILWRITEMASK_SHIFT); rmesa->hw.zs.cmd[R300_ZS_CNTL_2] |= (ctx->Stencil. - WriteMask[0] & ZB_STENCILREFMASK_STENCIL_MASK) << - ZB_STENCILREFMASK_STENCILWRITEMASK_SHIFT; + WriteMask[0] & R300_STENCILREF_MASK) << + R300_STENCILWRITEMASK_SHIFT; } static void r300StencilOpSeparate(GLcontext * ctx, GLenum face, @@ -971,34 +971,34 @@ static void r300StencilOpSeparate(GLcontext * ctx, GLenum face, R300_STATECHANGE(rmesa, zs); /* It is easier to mask what's left.. */ rmesa->hw.zs.cmd[R300_ZS_CNTL_1] &= - (R300_ZS_MASK << R300_RB3D_ZS1_DEPTH_FUNC_SHIFT) | - (R300_ZS_MASK << R300_RB3D_ZS1_FRONT_FUNC_SHIFT) | - (R300_ZS_MASK << R300_RB3D_ZS1_BACK_FUNC_SHIFT); + (R300_ZS_MASK << R300_Z_FUNC_SHIFT) | + (R300_ZS_MASK << R300_S_FRONT_FUNC_SHIFT) | + (R300_ZS_MASK << R300_S_BACK_FUNC_SHIFT); rmesa->hw.zs.cmd[R300_ZS_CNTL_1] |= (translate_stencil_op(ctx->Stencil.FailFunc[0]) << - R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT) + R300_S_FRONT_SFAIL_OP_SHIFT) | (translate_stencil_op(ctx->Stencil.ZFailFunc[0]) << - R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT) + R300_S_FRONT_ZFAIL_OP_SHIFT) | (translate_stencil_op(ctx->Stencil.ZPassFunc[0]) << - R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT); + R300_S_FRONT_ZPASS_OP_SHIFT); if (ctx->Stencil._TestTwoSide) { rmesa->hw.zs.cmd[R300_ZS_CNTL_1] |= (translate_stencil_op(ctx->Stencil.FailFunc[1]) << - R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT) + R300_S_BACK_SFAIL_OP_SHIFT) | (translate_stencil_op(ctx->Stencil.ZFailFunc[1]) << - R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT) + R300_S_BACK_ZFAIL_OP_SHIFT) | (translate_stencil_op(ctx->Stencil.ZPassFunc[1]) << - R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT); + R300_S_BACK_ZPASS_OP_SHIFT); } else { rmesa->hw.zs.cmd[R300_ZS_CNTL_1] |= (translate_stencil_op(ctx->Stencil.FailFunc[0]) << - R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT) + R300_S_BACK_SFAIL_OP_SHIFT) | (translate_stencil_op(ctx->Stencil.ZFailFunc[0]) << - R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT) + R300_S_BACK_ZFAIL_OP_SHIFT) | (translate_stencil_op(ctx->Stencil.ZPassFunc[0]) << - R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT); + R300_S_BACK_ZPASS_OP_SHIFT); } } @@ -1007,10 +1007,10 @@ static void r300ClearStencil(GLcontext * ctx, GLint s) r300ContextPtr rmesa = R300_CONTEXT(ctx); rmesa->state.stencil.clear = - ((GLuint) (ctx->Stencil.Clear & ZB_STENCILREFMASK_STENCIL_MASK) | - (ZB_STENCILREFMASK_STENCIL_MASK << ZB_STENCILREFMASK_STENCILMASK_SHIFT) | - ((ctx->Stencil.WriteMask[0] & ZB_STENCILREFMASK_STENCIL_MASK) << - ZB_STENCILREFMASK_STENCILMASK_SHIFT)); + ((GLuint) (ctx->Stencil.Clear & R300_STENCILREF_MASK) | + (R300_STENCILREF_MASK << R300_STENCILMASK_SHIFT) | + ((ctx->Stencil.WriteMask[0] & R300_STENCILREF_MASK) << + R300_STENCILMASK_SHIFT)); } /* ============================================================= @@ -2287,11 +2287,11 @@ static void r300ResetHwState(r300ContextPtr r300) if (r300->radeon.sarea->tiling_enabled) { /* XXX: Turn off when clearing buffers ? */ - r300->hw.zb.cmd[R300_ZB_PITCH] |= ZB_DEPTHPITCH_DEPTHMACROTILE_ENABLE; + r300->hw.zb.cmd[R300_ZB_PITCH] |= R300_DEPTHMACROTILE_ENABLE; if (ctx->Visual.depthBits == 24) r300->hw.zb.cmd[R300_ZB_PITCH] |= - ZB_DEPTHPITCH_DEPTHMICROTILE_TILED; + R300_DEPTHMICROTILE_TILED; } r300->hw.zb_depthclearvalue.cmd[1] = 0; @@ -2546,12 +2546,12 @@ void r300InitState(r300ContextPtr r300) switch (ctx->Visual.depthBits) { case 16: r300->state.depth.scale = 1.0 / (GLfloat) 0xffff; - depth_fmt = ZB_FORMAR_DEPTHFORMAT_16BIT_INT_Z; + depth_fmt = R300_DEPTHFORMAT_16BIT_INT_Z; r300->state.stencil.clear = 0x00000000; break; case 24: r300->state.depth.scale = 1.0 / (GLfloat) 0xffffff; - depth_fmt = ZB_FORMAR_DEPTHFORMAT_24BIT_INT_Z; + depth_fmt = R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL; r300->state.stencil.clear = 0x00ff0000; break; default: