From: Clifford Wolf Date: Sat, 23 Nov 2013 16:33:26 +0000 (+0100) Subject: AppNote 010 progress X-Git-Tag: yosys-0.2.0~324 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=e216e0e2917afb6516c0499f8880d68cf71b7c40;p=yosys.git AppNote 010 progress --- diff --git a/manual/.gitignore b/manual/.gitignore index 15063c483..7412c4d4e 100644 --- a/manual/.gitignore +++ b/manual/.gitignore @@ -6,3 +6,4 @@ *.out *.pdf *.toc +*.ok diff --git a/manual/APPNOTE_010_Verilog_to_BLIF.tex b/manual/APPNOTE_010_Verilog_to_BLIF.tex index 514f50e2d..aee21aff7 100644 --- a/manual/APPNOTE_010_Verilog_to_BLIF.tex +++ b/manual/APPNOTE_010_Verilog_to_BLIF.tex @@ -1,7 +1,61 @@ -\appnote{010}{Converting Verilog to BLIF}{Clifford Wolf} - -\begin{appnote_abstract} +% IEEEtran howto: +% http://ftp.univie.ac.at/packages/tex/macros/latex/contrib/IEEEtran/IEEEtran_HOWTO.pdf +\documentclass[9pt,technote,a4paper]{IEEEtran} + +\usepackage[T1]{fontenc} % required for luximono! +\usepackage[scaled=0.8]{luximono} % typewriter font with bold face + +% To install the luximono font files: +% getnonfreefonts-sys --all or +% getnonfreefonts-sys luximono +% +% when there are trouble you might need to: +% - Create /etc/texmf/updmap.d/99local-luximono.cfg +% containing the single line: Map ul9.map +% - Run update-updmap followed by mktexlsr and updmap-sys +% +% This commands must be executed as root with a root environment +% (i.e. run "sudo su" and then execute the commands in the root +% shell, don't just prefix the commands with "sudo"). + +\usepackage[unicode,bookmarks=false]{hyperref} +\usepackage[english]{babel} +\usepackage[utf8]{inputenc} +\usepackage{amssymb} +\usepackage{amsmath} +\usepackage{amsfonts} +\usepackage{units} +\usepackage{nicefrac} +\usepackage{eurosym} +\usepackage{graphicx} +\usepackage{verbatim} +\usepackage{algpseudocode} +\usepackage{scalefnt} +\usepackage{xspace} +\usepackage{color} +\usepackage{colortbl} +\usepackage{multirow} +\usepackage{hhline} +\usepackage{listings} +\usepackage{float} + +\usepackage{tikz} +\usetikzlibrary{calc} +\usetikzlibrary{arrows} +\usetikzlibrary{scopes} +\usetikzlibrary{through} +\usetikzlibrary{shapes.geometric} + +\lstset{basicstyle=\ttfamily,frame=trBL,xleftmargin=2em,xrightmargin=1em,numbers=left} + +\begin{document} + +\title{Yosys Application Note 010: \\ Converting Verilog to BLIF} +\author{Clifford Wolf} +\maketitle + +\begin{abstract} Verilog-2005 is a powerful Hardware Description Language (HDL) that can be used to easily create complex designs from small HDL code. It is the prefered method of design entry for many designers\footnote{The other half prefers VHDL, @@ -12,11 +66,16 @@ exchanging sequential logic between programs. It is easy to generate and easy to parse and is therefore the prefered method of design entry for many authors of logic synthesis tools. -Yosys\footnote{\url{http://www.clifford.at/yosys/}} is a feature-rich Open-Source Verilog synthesis tool that can be used to -bridge the gap between the two file formats. It implements most of Verilog-2005 -and thus can be used to import modern behavioral Verilog designs into BLIF-based -design flows without dependencies on proprietary synthesis tools. -\end{appnote_abstract} +Yosys \cite{yosys} is a feature-rich +Open-Source Verilog synthesis tool that can be used to bridge the gap between +the two file formats. It implements most of Verilog-2005 and thus can be used +to import modern behavioral Verilog designs into BLIF-based design flows +without dependencies on proprietary synthesis tools. + +The scope of Yosys goes of course far beyond Verilog logic synthesis. But +it is a useful and important feature and this Application Note will focus +on this aspect of Yosys. +\end{abstract} \section{Installation} @@ -35,14 +94,13 @@ and {\tt MiniSAT} support and not build {\tt yosys-abc}. This Application Note is based on GIT Rev. {\color{red} FIXME} from {\color{red} DATE} of Yosys. The Verilog sources used for the examples -is taken from the {\it yosys-bigsim test -bench}\footnote{\url{https://github.com/cliffordwolf/yosys-bigsim}}, GIT -Rev. {\color{red} FIXME}. +is taken from yosys-bigsim \cite{bigsim}, +a collection of real-world designs used for regression testing Yosys. \section{Getting Started} -We start with the {\tt softusb\_navre} core from {\it yosys-bigsim}. The navre -processor\footnote{\url{http://opencores.org/project,navre}} is an Open Source +We start with the {\tt softusb\_navre} core from yosys-bigsim. The Navré +processor \cite{navre} is an Open Source AVR clone. It is a single module ({\tt softusb\_navre}) in a single design file ({\tt softusb\_navre.v}). It also is using only features that map nicely to the BLIF format, for example it only uses synchronous resets. @@ -51,7 +109,7 @@ Converting {\tt softusb\_navre.v} to {\tt softusb\_navre.blif} could not be easier: \begin{figure}[H] -\begin{lstlisting}[frame=trBL,xleftmargin=1.5em,numbers=left] +\begin{lstlisting}[language=sh] yosys -o softusb_navre.blif \ -S softusb_navre.v \end{lstlisting} @@ -81,7 +139,7 @@ With a script file we have better control over Yosys. The following script file replicates what the command from the last section did: \begin{figure}[H] -\begin{lstlisting}[frame=trBL,xleftmargin=1.5em,numbers=left] +\begin{lstlisting}[language=sh] read_verilog softusb_navre.v hierarchy proc; opt; memory; opt; techmap; opt @@ -133,7 +191,7 @@ source file, as we will see in the next section. Now Yosys can be run with the file of the synthesis script as argument: \begin{figure}[H] -\begin{lstlisting}[frame=trBL,xleftmargin=1.5em,numbers=left] +\begin{lstlisting}[language=sh] yosys softusb_navre.ys \end{lstlisting} \renewcommand{\figurename}{Listing} @@ -168,7 +226,7 @@ So now we have the final synthesis script for generating a BLIF file for the navre CPU: \begin{figure}[H] -\begin{lstlisting}[frame=trBL,xleftmargin=1.5em,numbers=left] +\begin{lstlisting}[language=sh] read_verilog softusb_navre.v hierarchy -check -top softusb_navre proc; opt; memory; opt; @@ -181,12 +239,12 @@ write_blif softusb_navre.blif \section{Advanced Example: The Amber23 ARMv2a CPU} -Our 2nd example is the Amber23\footnote{\url{http://opencores.org/project,amber}} +Our 2nd example is the Amber23 \cite{amber} ARMv2a CPU. Once again we base our example on the Verilog code that is included -in {\it yosys-bigsim}. +in yosys-bigsim \cite{bigsim}. \begin{figure}[b!] -\begin{lstlisting}[frame=trBL,xleftmargin=1.5em,numbers=left] +\begin{lstlisting}[language=sh] read_verilog a23_alu.v read_verilog a23_barrel_shift_fpga.v read_verilog a23_barrel_shift.v @@ -221,6 +279,10 @@ implementation. This design can not be expressed in BLIF as it is. Instead we need to use a synthesis script that transforms this to synchonous resets that can be expressed in BLIF. +(Note that this is not a problem if this coding techiques are used to model +ROM, where the register is initialized using this syntax but is never updated +otherwise.) + \medskip Listing~\ref{aber23.ys} shows the synthesis script for the Amber23 core. In @@ -231,7 +293,7 @@ altered so that this new signal is connected throughout the whole design hierarchy. \begin{figure}[t!] -\begin{lstlisting}[frame=trBL,xleftmargin=1.5em,numbers=left] +\begin{lstlisting}[language=Verilog] reg [7:0] a = 13, b; initial b = 37; \end{lstlisting} @@ -241,41 +303,155 @@ initial b = 37; \end{figure} \begin{figure}[b!] -\begin{lstlisting}[frame=trBL,xleftmargin=1.5em,numbers=left] -module \$adff (CLK, ARST, D, Q); +\begin{lstlisting}[language=Verilog] +(* techmap_celltype = "$adff" *) +module adff2dff (CLK, ARST, D, Q); parameter WIDTH = 1; -parameter CLK_POLARITY = 1'b1; -parameter ARST_POLARITY = 1'b1; +parameter CLK_POLARITY = 1; +parameter ARST_POLARITY = 1; parameter ARST_VALUE = 0; input CLK, ARST; input [WIDTH-1:0] D; output reg [WIDTH-1:0] Q; +wire [1023:0] _TECHMAP_DO_ = "proc"; + wire _TECHMAP_FAIL_ = !CLK_POLARITY || !ARST_POLARITY; always @(posedge CLK) - if (ARST) - Q <= ARST_VALUE; - else - Q <= D; + if (ARST) + Q <= ARST_VALUE; + else + Q <= D; endmodule \end{lstlisting} - \renewcommand{\figurename}{Listing} +\renewcommand{\figurename}{Listing} \caption{\tt adff2dff.v} \label{adff2dff.v} \end{figure} -In line 18 the {\tt proc} command is called. But this time the newly created -reset signal is passed to the core as a global reset line to use for resetting -all registers to their initial values. +In line 18 the {\tt proc} command is called. But in this script the signal name +{\tt globrst} is passed to the command as a global reset line to be used for +resetting all registers to their initial values. Finally in line 19 the {\tt techmap} command is used to replace all instances -of flip-flops with asynchronous resets to flip-flops with synchronous resets. -The map file used fo this is shown in Lising~\ref{adff2dff.v}. +of flip-flops with asynchronous resets with flip-flops with synchronous resets. +The map file used for this is shown in Listing~\ref{adff2dff.v}. Note how the +{\tt techmap\_celltype} attribute is used in line 1 to tell the techmap command +which cells to replace in the design, how the {\tt \_TECHMAP\_FAIL\_} wire +(which evaluates to a constant value) determines if the parameter set is +compatible with this replacement circuit in lines 15 and 16, and how the {\tt +\_TECHMAP\_DO\_} wire in line 13 provides a mini synthesis-script to be used to +process this cell. + +\begin{figure*} +\begin{lstlisting}[language=C] +#include +#include + +#define BITMAP_SIZE 64 +#define OUTPORT 0x10000000 + +static uint16_t bitmap[BITMAP_SIZE/32]; + +static void bitmap_set(uint32_t idx) { bitmap[idx/32] |= 1 << (idx % 32); } +static bool bitmap_get(uint32_t idx) { return (bitmap[idx/32] & (1 << (idx % 32))) != 0; } +static void output(uint32_t val) { *((volatile uint32_t*)OUTPORT) = val; } + +int main() { + uint32_t i, j, k; + output(2); + for (i = 0; i < BITMAP_SIZE; i++) { + if (bitmap_get(i)) continue; + output(3+2*i); + for (j = 2*(3+2*i);; j += 3+2*i) { + if (j%2 == 0) continue; + k = (j-3)/2; + if (k >= BITMAP_SIZE) break; + bitmap_set(k); + } + } + output(0); + return 0; +} +\end{lstlisting} +\renewcommand{\figurename}{Listing} +\caption{Test program for Amber23 CPU (Sieve of Eratosthenes)} +\label{sieve} +\end{figure*} + +\section{Validation of the Amber23 CPU} + +The BLIF file for the Amber23 core, generated using Listings~\ref{aber23.ys} +and \ref{adff2dff.v} and the version of the Amber23 RTL source that is bundled +with yosys-bigsim was validated using the test-bench from yosys-bigsim +and successfully executed the program shown in Listing~\ref{sieve}. The +test program was compiled using GCC 4.6.3. + +For simulation the BLIF file was converted back to Verilog using ABC +\cite{ABC}. So this test includes the successful transformation of the BLIF +file into the ABC internal format as well. + +The only interesting thing to write about the simulation itself is that this is +probably one of the most wasteful and time consuming ways of successfully +calculating the first 50 primes the author has ever conducted. + +\section{Limitations} + +At the time of this writing Yosys does not support multi-dimensional memories, +does not support writing to individual bits of array elements, does not +support initialization of arrays with {\tt \$readmemb} and {\tt \$readmemh}, +and has only limited support for tristate logic, to name just a few +limitations. + +That being said, Yosys can synthesize an overwhelming majority of real-world +Verilog RTL code. The remaining cases can usually be modified to be compatible +with Yosys quite easily. + +The various designs in yosys-bigsim are a good place to look for examples +of what is within the capabilities of Yosys. + +\section{Conclusion} + +Yosys is a feature-rich Verilog-2005 synthesis tool. It has many uses, but +one is to provide an easy gateway from high-level Verilog code to low-level +logic circuits. + +The command line option {\tt -S} can be used to quickly synthesize Verilog +code to BLIF files without a hassle. + +With custom synthesis scripts it becomes possible to easily perform high-level +optimizations, such as re-encoding FSMs. In some extreme cases, such as the +Amber23 ARMv2 CPU, the more advanced Yosys features can be used to change a +design to fit a certain need without actually touching the RTL code. + +\begin{thebibliography}{9} + +\bibitem{yosys} +Clifford Wolf. The Yosys Open SYnthesis Suite. \\ +\url{http://www.clifford.at/yosys/} + +\bibitem{bigsim} +yosys-bigsim, a collection of real-world Verilog designs for regression testing purposes. \\ +\url{https://github.com/cliffordwolf/yosys-bigsim} + +\bibitem{navre} +Sebastien Bourdeauducq. Navré AVR clone (8-bit RISC). \\ +\url{http://opencores.org/project,navre} + +\bibitem{amber} +Conor Santifort. Amber ARM-compatible core. \\ +\url{http://opencores.org/project,amber} + +\bibitem{ABC} +Berkeley Logic Synthesis and Verification Group. ABC: A System for Sequential Synthesis and Verification. \\ +\url{http://www.eecs.berkeley.edu/~alanmi/abc/} + +\end{thebibliography} -{\color{red} FIXME} +\end{document} diff --git a/manual/appnote.tex b/manual/appnote.tex deleted file mode 100644 index 4c543d6ae..000000000 --- a/manual/appnote.tex +++ /dev/null @@ -1,39 +0,0 @@ - -% IEEEtran howto: -% http://ftp.univie.ac.at/packages/tex/macros/latex/contrib/IEEEtran/IEEEtran_HOWTO.pdf -\documentclass[9pt,technote,a4paper]{IEEEtran} - -\usepackage[unicode,bookmarks=false]{hyperref} -\usepackage[english]{babel} -\usepackage[utf8]{inputenc} -\usepackage{amssymb} -\usepackage{amsmath} -\usepackage{amsfonts} -\usepackage{units} -\usepackage{nicefrac} -\usepackage{eurosym} -\usepackage{graphicx} -\usepackage{verbatim} -\usepackage{algpseudocode} -\usepackage{scalefnt} -\usepackage{xspace} -\usepackage{color} -\usepackage{colortbl} -\usepackage{multirow} -\usepackage{hhline} -\usepackage{listings} -\usepackage{float} - -\usepackage{tikz} -\usetikzlibrary{calc} -\usetikzlibrary{arrows} -\usetikzlibrary{scopes} -\usetikzlibrary{through} -\usetikzlibrary{shapes.geometric} - -\def\appnote#1#2#3{\title{Yosy Application Note #1: \\ #2} \author{#3} \maketitle} -\newenvironment{appnote_abstract}{\begin{abstract}}{\end{abstract}} - -\begin{document} -\input{APPNOTE_010_Verilog_to_BLIF} -\end{document} diff --git a/manual/make_appnotes.sh b/manual/make_appnotes.sh new file mode 100644 index 000000000..00f875760 --- /dev/null +++ b/manual/make_appnotes.sh @@ -0,0 +1,17 @@ +#!/bin/bash + +set -ex +for job in APPNOTE_010_Verilog_to_BLIF +do + [ -f $job.ok -a $job.ok -nt $job.tex ] && continue + old_md5=$([ -f $job.aux ] && md5sum < $job.aux) + while + pdflatex -shell-escape -halt-on-error $job.tex + new_md5=$(md5sum < $job.aux) + [ "$old_md5" != "$new_md5" ] + do + old_md5="$new_md5" + done + touch $job.ok +done +