From: Nathanael Nerode Date: Sun, 1 Dec 2002 11:32:58 +0000 (+0000) Subject: 2002-12-01 Nathanael Nerode X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=e393202e3652212312fe6f3f7073297220b577ec;p=binutils-gdb.git 2002-12-01 Nathanael Nerode (Continuing slow-motion replay) * Makefile.def: Add list of recursive targets to autogenerate. Add build_modules. * Makefile.tpl: Autogenerate do-* targets. Autogenerate *-target-* targets. Autogenerate *-build-* targets. * Makefile.in: Regenerate. --- diff --git a/ChangeLog b/ChangeLog index 2164ccd6b64..0d9cc68b518 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,12 @@ +2002-12-01 Nathanael Nerode + + (Continuing slow-motion replay) + * Makefile.def: Add list of recursive targets to autogenerate. + Add build_modules. + * Makefile.tpl: Autogenerate do-* targets. Autogenerate *-target-* + targets. Autogenerate *-build-* targets. + * Makefile.in: Regenerate. + 2002-11-30 Nathanael Nerode (Continuing slow-motion replay) diff --git a/Makefile.def b/Makefile.def index 91a78067c23..9d50467a124 100644 --- a/Makefile.def +++ b/Makefile.def @@ -1,6 +1,8 @@ #! /usr/bin/autogen AutoGen definitions Makefile.tpl; +build_modules= { module= libiberty; }; + host_modules= { module= ash; }; host_modules= { module= autoconf; }; host_modules= { module= automake; }; @@ -85,3 +87,15 @@ target_modules = { module= zlib; }; target_modules = { module= boehm-gc; }; target_modules = { module= qthreads; }; target_modules = { module= rda; }; + +// These are (some of) the targets to be done in each subdirectory. +// Not all; these are the ones which don't have special options. +recursive_targets = { target= clean; }; +recursive_targets = { target= distclean; }; +recursive_targets = { target= dvi; }; +recursive_targets = { target= info; }; +recursive_targets = { target= install-info; }; +recursive_targets = { target= installcheck; }; +recursive_targets = { target= mostlyclean; }; +recursive_targets = { target= maintainer-clean; }; +recursive_targets = { target= TAGS; }; diff --git a/Makefile.in b/Makefile.in index 590c447644d..96082a27640 100644 --- a/Makefile.in +++ b/Makefile.in @@ -962,20 +962,10 @@ all.normal: \ # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once, # because it is so large that it can easily overflow the command line # length limit on some systems. -DO_X = \ - do-clean \ - do-distclean \ - do-dvi \ - do-info \ - do-install-info \ - do-installcheck \ - do-mostlyclean \ - do-maintainer-clean \ - do-TAGS -.PHONY: $(DO_X) -$(DO_X): - @target=`echo $@ | sed -e 's/^do-//'`; \ - r=`${PWD}`; export r; \ + +.PHONY: do-clean +do-clean: + @r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ for i in $(SUBDIRS) -dummy-; do \ @@ -997,11 +987,11 @@ $(DO_X): "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - $${target}); \ + clean); \ then true; else exit 1; fi; \ else true; fi; \ done - @target=`echo $@ | sed -e 's/^do-//'`; \ + # Break into two pieces r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ @@ -1015,66 +1005,444 @@ $(DO_X): "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - $${target}); \ + clean); \ then true; else exit 1; fi; \ else true; fi; \ done -# Here are the targets which correspond to the do-X targets. - -.PHONY: info installcheck dvi install-info -.PHONY: clean distclean mostlyclean maintainer-clean realclean -.PHONY: local-clean local-distclean local-maintainer-clean -info: do-info -installcheck: do-installcheck -dvi: do-dvi - -# Make sure makeinfo is built before we do a `make info'. -do-info: all-texinfo - -install-info: do-install-info dir.info +.PHONY: do-distclean +do-distclean: + @r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ - if [ -f dir.info ] ; then \ - $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \ - else true ; fi + $(SET_LIB_PATH) \ + for i in $(SUBDIRS) -dummy-; do \ + if [ -f ./$$i/Makefile ]; then \ + case $$i in \ + gcc) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + *) \ + for flag in $(EXTRA_HOST_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + esac ; \ + if (cd ./$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + # Break into two pieces + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(TARGET_CONFIGDIRS) -dummy-; do \ + if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + if (cd $(TARGET_SUBDIR)/$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean); \ + then true; else exit 1; fi; \ + else true; fi; \ + done -local-clean: - -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log +.PHONY: do-dvi +do-dvi: + @r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(SUBDIRS) -dummy-; do \ + if [ -f ./$$i/Makefile ]; then \ + case $$i in \ + gcc) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + *) \ + for flag in $(EXTRA_HOST_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + esac ; \ + if (cd ./$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + # Break into two pieces + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(TARGET_CONFIGDIRS) -dummy-; do \ + if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + if (cd $(TARGET_SUBDIR)/$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi); \ + then true; else exit 1; fi; \ + else true; fi; \ + done -local-distclean: - -rm -f Makefile config.status config.cache mh-frag mt-frag - -if [ "$(TARGET_SUBDIR)" != "." ]; then \ - rm -rf $(TARGET_SUBDIR); \ - else true; fi - -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile - -rm -f texinfo/doc/Makefile texinfo/po/POTFILES - -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null - -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null - -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null +.PHONY: do-info +do-info: + @r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(SUBDIRS) -dummy-; do \ + if [ -f ./$$i/Makefile ]; then \ + case $$i in \ + gcc) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + *) \ + for flag in $(EXTRA_HOST_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + esac ; \ + if (cd ./$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + # Break into two pieces + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(TARGET_CONFIGDIRS) -dummy-; do \ + if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + if (cd $(TARGET_SUBDIR)/$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info); \ + then true; else exit 1; fi; \ + else true; fi; \ + done -local-maintainer-clean: - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." +.PHONY: do-install-info +do-install-info: + @r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(SUBDIRS) -dummy-; do \ + if [ -f ./$$i/Makefile ]; then \ + case $$i in \ + gcc) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + *) \ + for flag in $(EXTRA_HOST_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + esac ; \ + if (cd ./$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + # Break into two pieces + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(TARGET_CONFIGDIRS) -dummy-; do \ + if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + if (cd $(TARGET_SUBDIR)/$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info); \ + then true; else exit 1; fi; \ + else true; fi; \ + done -clean: do-clean local-clean -mostlyclean: do-mostlyclean local-clean -distclean: do-distclean local-clean local-distclean -maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean -maintainer-clean: local-distclean -realclean: maintainer-clean +.PHONY: do-installcheck +do-installcheck: + @r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(SUBDIRS) -dummy-; do \ + if [ -f ./$$i/Makefile ]; then \ + case $$i in \ + gcc) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + *) \ + for flag in $(EXTRA_HOST_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + esac ; \ + if (cd ./$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + # Break into two pieces + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(TARGET_CONFIGDIRS) -dummy-; do \ + if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + if (cd $(TARGET_SUBDIR)/$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck); \ + then true; else exit 1; fi; \ + else true; fi; \ + done -# This rule is used to clean specific modules. -.PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc -$(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc: - @dir=`echo $@ | sed -e 's/clean-//'`; \ - if [ -f ./$${dir}/Makefile ] ; then \ - r=`${PWD}`; export r; \ - s=`cd $(srcdir); ${PWD}`; export s; \ - $(SET_LIB_PATH) \ - (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \ - else \ - true; \ - fi +.PHONY: do-mostlyclean +do-mostlyclean: + @r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(SUBDIRS) -dummy-; do \ + if [ -f ./$$i/Makefile ]; then \ + case $$i in \ + gcc) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + *) \ + for flag in $(EXTRA_HOST_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + esac ; \ + if (cd ./$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + # Break into two pieces + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(TARGET_CONFIGDIRS) -dummy-; do \ + if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + if (cd $(TARGET_SUBDIR)/$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + +.PHONY: do-maintainer-clean +do-maintainer-clean: + @r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(SUBDIRS) -dummy-; do \ + if [ -f ./$$i/Makefile ]; then \ + case $$i in \ + gcc) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + *) \ + for flag in $(EXTRA_HOST_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + esac ; \ + if (cd ./$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + # Break into two pieces + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(TARGET_CONFIGDIRS) -dummy-; do \ + if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + if (cd $(TARGET_SUBDIR)/$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + +.PHONY: do-TAGS +do-TAGS: + @r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(SUBDIRS) -dummy-; do \ + if [ -f ./$$i/Makefile ]; then \ + case $$i in \ + gcc) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + *) \ + for flag in $(EXTRA_HOST_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + ;; \ + esac ; \ + if (cd ./$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + # Break into two pieces + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + for i in $(TARGET_CONFIGDIRS) -dummy-; do \ + if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + if (cd $(TARGET_SUBDIR)/$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + + + +# Here are the targets which correspond to the do-X targets. + +.PHONY: info installcheck dvi install-info +.PHONY: clean distclean mostlyclean maintainer-clean realclean +.PHONY: local-clean local-distclean local-maintainer-clean +info: do-info +installcheck: do-installcheck +dvi: do-dvi + +# Make sure makeinfo is built before we do a `make info'. +do-info: all-texinfo + +install-info: do-install-info dir.info + s=`cd $(srcdir); ${PWD}`; export s; \ + if [ -f dir.info ] ; then \ + $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \ + else true ; fi + +local-clean: + -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log + +local-distclean: + -rm -f Makefile config.status config.cache mh-frag mt-frag + -if [ "$(TARGET_SUBDIR)" != "." ]; then \ + rm -rf $(TARGET_SUBDIR); \ + else true; fi + -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile + -rm -f texinfo/doc/Makefile texinfo/po/POTFILES + -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null + -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null + -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null + +local-maintainer-clean: + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +clean: do-clean local-clean +mostlyclean: do-mostlyclean local-clean +distclean: do-distclean local-clean local-distclean +maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean +maintainer-clean: local-distclean +realclean: maintainer-clean + +# This rule is used to clean specific modules. +.PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc +$(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc: + @dir=`echo $@ | sed -e 's/clean-//'`; \ + if [ -f ./$${dir}/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \ + else \ + true; \ + fi .PHONY: $(CLEAN_TARGET_MODULES) $(CLEAN_TARGET_MODULES): @@ -1149,105 +1517,2073 @@ vault-install: @if [ -f ./release/vault-install ] ; then \ ./release/vault-install $(host_alias) $(target_alias) ; \ else \ - true ; \ + true ; \ + fi + +.PHONY: install.all +install.all: install-no-fixedincludes + @if [ -f ./gcc/Makefile ] ; then \ + r=`${PWD}` ; export r ; \ + $(SET_LIB_PATH) \ + (cd ./gcc; \ + $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \ + else \ + true ; \ + fi + +# install-no-fixedincludes is used because Cygnus can not distribute +# the fixed header files. +.PHONY: install-no-fixedincludes +install-no-fixedincludes: \ + installdirs \ + $(INSTALL_MODULES) \ + $(INSTALL_TARGET_MODULES) \ + $(INSTALL_X11_MODULES) \ + gcc-no-fixedincludes + +# Install the gcc headers files, but not the fixed include files, +# which Cygnus is not allowed to distribute. This rule is very +# dependent on the workings of the gcc Makefile.in. +.PHONY: gcc-no-fixedincludes +gcc-no-fixedincludes: + @if [ -f ./gcc/Makefile ]; then \ + rm -rf gcc/tmp-include; \ + mv gcc/include gcc/tmp-include 2>/dev/null; \ + mkdir gcc/include; \ + cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \ + touch gcc/stmp-fixinc gcc/include/fixed; \ + rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}` ; export s; \ + $(SET_LIB_PATH) \ + (cd ./gcc; \ + $(MAKE) $(GCC_FLAGS_TO_PASS) install); \ + rm -rf gcc/include; \ + mv gcc/tmp-include gcc/include 2>/dev/null; \ + else true; fi + +# These rules are used to build the modules which are built with the +# build machine's native compiler. + +.PHONY: all-build-libiberty +all-build-libiberty: + @if [ -f ./libiberty/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + (cd $(BUILD_SUBDIR)/libiberty && $(MAKE) all); \ + else \ + true; \ + fi + +.PHONY: configure-build-libiberty +configure-build-libiberty: + @if [ ! -d $(BUILD_SUBDIR) ]; then \ + true; \ + elif [ -f $(BUILD_SUBDIR)/libiberty/Makefile ] ; then \ + true; \ + elif echo " $(BUILD_CONFIGDIRS) " | grep " libiberty " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/libiberty ]; then \ + [ -d $(BUILD_SUBDIR)/libiberty ] || mkdir $(BUILD_SUBDIR)/libiberty;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + AR="$(AR_FOR_BUILD)"; export AR; \ + AS="$(AS_FOR_BUILD)"; export AS; \ + CC="$(CC_FOR_BUILD)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \ + CXX="$(CXX_FOR_BUILD)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \ + LD="$(LD_FOR_BUILD)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \ + NM="$(NM_FOR_BUILD)"; export NM; \ + RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \ + echo Configuring in $(BUILD_SUBDIR)/libiberty; \ + cd "$(BUILD_SUBDIR)/libiberty" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(BUILD_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(BUILD_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/libiberty "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/libiberty"; \ + libsrcdir="$$s/libiberty"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(BUILD_CONFIGARGS) $${srcdiroption} \ + --with-build-subdir="$(BUILD_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(BUILD_CONFIGARGS) $${srcdiroption} \ + --with-build-subdir="$(BUILD_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir libiberty || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + + +# This rule is used to build the modules which use FLAGS_TO_PASS. To +# build a target all-X means to cd to X and make all. +.PHONY: $(ALL_MODULES) +$(ALL_MODULES): + @dir=`echo $@ | sed -e 's/all-//'`; \ + if [ -f ./$${dir}/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +# These rules are used to check the modules which use FLAGS_TO_PASS. +# To build a target check-X means to cd to X and make check. Some +# modules are only tested in a native toolchain. + +.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES) +$(NATIVE_CHECK_MODULES): + @if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ + dir=`echo $@ | sed -e 's/check-//'`; \ + if [ -f ./$${dir}/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \ + else \ + true; \ + fi; \ + fi + +$(CROSS_CHECK_MODULES): + @dir=`echo $@ | sed -e 's/check-//'`; \ + if [ -f ./$${dir}/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \ + else \ + true; \ + fi + +# This rule is used to install the modules which use FLAGS_TO_PASS. +# To build a target install-X means to cd to X and make install. +.PHONY: $(INSTALL_MODULES) +$(INSTALL_MODULES): installdirs + @dir=`echo $@ | sed -e 's/install-//'`; \ + if [ -f ./$${dir}/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + +# These rules are used to build the modules which are built with the target +# tools. To make foo-X means to cd to X and make foo. + +.PHONY: configure-target-libstdc++-v3 +configure-target-libstdc++-v3: + @if [ -d $(TARGET_SUBDIR)/libstdc++-v3 ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/libstdc++-v3/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/libstdc++-v3/multilib.out $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out; \ + else \ + echo "Multilibs changed for libstdc++-v3, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/libstdc++-v3/multilib.out $(TARGET_SUBDIR)/libstdc++-v3/Makefile; \ + mv $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=libstdc++-v3 ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " libstdc++-v3 " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/libstdc++-v3 ]; then \ + [ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || mkdir $(TARGET_SUBDIR)/libstdc++-v3;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libstdc++-v3; \ + cd "$(TARGET_SUBDIR)/libstdc++-v3" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/libstdc++-v3 "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/libstdc++-v3"; \ + libsrcdir="$$s/libstdc++-v3"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir libstdc++-v3 || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-libstdc++-v3 +all-target-libstdc++-v3: + @dir=libstdc++-v3 ; \ + if [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libstdc++-v3; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +.PHONY: check-target-libstdc++-v3 +check-target-libstdc++-v3: + @dir=libstdc++-v3 ; \ + if [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libstdc++-v3; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + else \ + true; \ + fi + +\ +.PHONY: install-target-libstdc++-v3 +install-target-libstdc++-v3: installdirs + @dir=libstdc++-v3 ; \ + if [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libstdc++-v3; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-newlib +configure-target-newlib: + @if [ -d $(TARGET_SUBDIR)/newlib ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/newlib/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/newlib/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/newlib/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/newlib/multilib.out $(TARGET_SUBDIR)/newlib/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/newlib/tmpmulti.out; \ + else \ + echo "Multilibs changed for newlib, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/newlib/multilib.out $(TARGET_SUBDIR)/newlib/Makefile; \ + mv $(TARGET_SUBDIR)/newlib/tmpmulti.out $(TARGET_SUBDIR)/newlib/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/newlib/tmpmulti.out $(TARGET_SUBDIR)/newlib/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=newlib ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " newlib " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/newlib ]; then \ + [ -d $(TARGET_SUBDIR)/newlib ] || mkdir $(TARGET_SUBDIR)/newlib;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/newlib; \ + cd "$(TARGET_SUBDIR)/newlib" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/newlib "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/newlib"; \ + libsrcdir="$$s/newlib"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir newlib || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-newlib +all-target-newlib: + @dir=newlib ; \ + if [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/newlib; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +.PHONY: check-target-newlib +check-target-newlib: + @dir=newlib ; \ + if [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/newlib; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + else \ + true; \ + fi + +\ +.PHONY: install-target-newlib +install-target-newlib: installdirs + @dir=newlib ; \ + if [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/newlib; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-libf2c +configure-target-libf2c: + @if [ -d $(TARGET_SUBDIR)/libf2c ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libf2c/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/libf2c/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/libf2c/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/libf2c/multilib.out $(TARGET_SUBDIR)/libf2c/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/libf2c/tmpmulti.out; \ + else \ + echo "Multilibs changed for libf2c, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/libf2c/multilib.out $(TARGET_SUBDIR)/libf2c/Makefile; \ + mv $(TARGET_SUBDIR)/libf2c/tmpmulti.out $(TARGET_SUBDIR)/libf2c/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/libf2c/tmpmulti.out $(TARGET_SUBDIR)/libf2c/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=libf2c ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " libf2c " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/libf2c ]; then \ + [ -d $(TARGET_SUBDIR)/libf2c ] || mkdir $(TARGET_SUBDIR)/libf2c;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libf2c; \ + cd "$(TARGET_SUBDIR)/libf2c" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/libf2c "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/libf2c"; \ + libsrcdir="$$s/libf2c"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir libf2c || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-libf2c +all-target-libf2c: + @dir=libf2c ; \ + if [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libf2c; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +.PHONY: check-target-libf2c +check-target-libf2c: + @dir=libf2c ; \ + if [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libf2c; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + else \ + true; \ + fi + +\ +.PHONY: install-target-libf2c +install-target-libf2c: installdirs + @dir=libf2c ; \ + if [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libf2c; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-libobjc +configure-target-libobjc: + @if [ -d $(TARGET_SUBDIR)/libobjc ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libobjc/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/libobjc/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/libobjc/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/libobjc/multilib.out $(TARGET_SUBDIR)/libobjc/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/libobjc/tmpmulti.out; \ + else \ + echo "Multilibs changed for libobjc, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/libobjc/multilib.out $(TARGET_SUBDIR)/libobjc/Makefile; \ + mv $(TARGET_SUBDIR)/libobjc/tmpmulti.out $(TARGET_SUBDIR)/libobjc/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/libobjc/tmpmulti.out $(TARGET_SUBDIR)/libobjc/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=libobjc ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " libobjc " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/libobjc ]; then \ + [ -d $(TARGET_SUBDIR)/libobjc ] || mkdir $(TARGET_SUBDIR)/libobjc;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libobjc; \ + cd "$(TARGET_SUBDIR)/libobjc" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/libobjc "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/libobjc"; \ + libsrcdir="$$s/libobjc"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir libobjc || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-libobjc +all-target-libobjc: + @dir=libobjc ; \ + if [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libobjc; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +.PHONY: check-target-libobjc +check-target-libobjc: + @dir=libobjc ; \ + if [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libobjc; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + else \ + true; \ + fi + +\ +.PHONY: install-target-libobjc +install-target-libobjc: installdirs + @dir=libobjc ; \ + if [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libobjc; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-libtermcap +configure-target-libtermcap: + @if [ -d $(TARGET_SUBDIR)/libtermcap ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libtermcap/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/libtermcap/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/libtermcap/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/libtermcap/multilib.out $(TARGET_SUBDIR)/libtermcap/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/libtermcap/tmpmulti.out; \ + else \ + echo "Multilibs changed for libtermcap, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/libtermcap/multilib.out $(TARGET_SUBDIR)/libtermcap/Makefile; \ + mv $(TARGET_SUBDIR)/libtermcap/tmpmulti.out $(TARGET_SUBDIR)/libtermcap/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/libtermcap/tmpmulti.out $(TARGET_SUBDIR)/libtermcap/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=libtermcap ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " libtermcap " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/libtermcap ]; then \ + [ -d $(TARGET_SUBDIR)/libtermcap ] || mkdir $(TARGET_SUBDIR)/libtermcap;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libtermcap; \ + cd "$(TARGET_SUBDIR)/libtermcap" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/libtermcap "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/libtermcap"; \ + libsrcdir="$$s/libtermcap"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir libtermcap || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-libtermcap +all-target-libtermcap: + @dir=libtermcap ; \ + if [ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libtermcap; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +\ +.PHONY: install-target-libtermcap +install-target-libtermcap: installdirs + @dir=libtermcap ; \ + if [ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libtermcap; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-winsup +configure-target-winsup: + @if [ -d $(TARGET_SUBDIR)/winsup ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/winsup/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/winsup/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/winsup/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/winsup/multilib.out $(TARGET_SUBDIR)/winsup/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/winsup/tmpmulti.out; \ + else \ + echo "Multilibs changed for winsup, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/winsup/multilib.out $(TARGET_SUBDIR)/winsup/Makefile; \ + mv $(TARGET_SUBDIR)/winsup/tmpmulti.out $(TARGET_SUBDIR)/winsup/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/winsup/tmpmulti.out $(TARGET_SUBDIR)/winsup/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=winsup ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " winsup " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/winsup ]; then \ + [ -d $(TARGET_SUBDIR)/winsup ] || mkdir $(TARGET_SUBDIR)/winsup;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/winsup; \ + cd "$(TARGET_SUBDIR)/winsup" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/winsup "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/winsup"; \ + libsrcdir="$$s/winsup"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir winsup || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-winsup +all-target-winsup: + @dir=winsup ; \ + if [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/winsup; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +.PHONY: check-target-winsup +check-target-winsup: + @dir=winsup ; \ + if [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/winsup; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + else \ + true; \ + fi + +\ +.PHONY: install-target-winsup +install-target-winsup: installdirs + @dir=winsup ; \ + if [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/winsup; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-libgloss +configure-target-libgloss: + @if [ -d $(TARGET_SUBDIR)/libgloss ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libgloss/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/libgloss/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/libgloss/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/libgloss/multilib.out $(TARGET_SUBDIR)/libgloss/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/libgloss/tmpmulti.out; \ + else \ + echo "Multilibs changed for libgloss, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/libgloss/multilib.out $(TARGET_SUBDIR)/libgloss/Makefile; \ + mv $(TARGET_SUBDIR)/libgloss/tmpmulti.out $(TARGET_SUBDIR)/libgloss/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/libgloss/tmpmulti.out $(TARGET_SUBDIR)/libgloss/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=libgloss ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/libgloss/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " libgloss " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/libgloss ]; then \ + [ -d $(TARGET_SUBDIR)/libgloss ] || mkdir $(TARGET_SUBDIR)/libgloss;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libgloss; \ + cd "$(TARGET_SUBDIR)/libgloss" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/libgloss "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/libgloss"; \ + libsrcdir="$$s/libgloss"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir libgloss || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-libgloss +all-target-libgloss: + @dir=libgloss ; \ + if [ -f $(TARGET_SUBDIR)/libgloss/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libgloss; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +\ +.PHONY: install-target-libgloss +install-target-libgloss: installdirs + @dir=libgloss ; \ + if [ -f $(TARGET_SUBDIR)/libgloss/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libgloss; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-libiberty +configure-target-libiberty: + @if [ -d $(TARGET_SUBDIR)/libiberty ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libiberty/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/libiberty/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/libiberty/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/libiberty/multilib.out $(TARGET_SUBDIR)/libiberty/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/libiberty/tmpmulti.out; \ + else \ + echo "Multilibs changed for libiberty, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/libiberty/multilib.out $(TARGET_SUBDIR)/libiberty/Makefile; \ + mv $(TARGET_SUBDIR)/libiberty/tmpmulti.out $(TARGET_SUBDIR)/libiberty/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/libiberty/tmpmulti.out $(TARGET_SUBDIR)/libiberty/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=libiberty ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " libiberty " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/libiberty ]; then \ + [ -d $(TARGET_SUBDIR)/libiberty ] || mkdir $(TARGET_SUBDIR)/libiberty;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libiberty; \ + cd "$(TARGET_SUBDIR)/libiberty" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/libiberty "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/libiberty"; \ + libsrcdir="$$s/libiberty"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir libiberty || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-libiberty +all-target-libiberty: + @dir=libiberty ; \ + if [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libiberty; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +.PHONY: check-target-libiberty +check-target-libiberty: + @dir=libiberty ; \ + if [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libiberty; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + else \ + true; \ + fi + +\ +.PHONY: install-target-libiberty +install-target-libiberty: installdirs + @dir=libiberty ; \ + if [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libiberty; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-gperf +configure-target-gperf: + @if [ -d $(TARGET_SUBDIR)/gperf ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/gperf/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/gperf/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/gperf/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/gperf/multilib.out $(TARGET_SUBDIR)/gperf/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/gperf/tmpmulti.out; \ + else \ + echo "Multilibs changed for gperf, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/gperf/multilib.out $(TARGET_SUBDIR)/gperf/Makefile; \ + mv $(TARGET_SUBDIR)/gperf/tmpmulti.out $(TARGET_SUBDIR)/gperf/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/gperf/tmpmulti.out $(TARGET_SUBDIR)/gperf/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=gperf ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " gperf " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/gperf ]; then \ + [ -d $(TARGET_SUBDIR)/gperf ] || mkdir $(TARGET_SUBDIR)/gperf;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/gperf; \ + cd "$(TARGET_SUBDIR)/gperf" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/gperf "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/gperf"; \ + libsrcdir="$$s/gperf"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir gperf || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-gperf +all-target-gperf: + @dir=gperf ; \ + if [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/gperf; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +.PHONY: check-target-gperf +check-target-gperf: + @dir=gperf ; \ + if [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/gperf; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + else \ + true; \ + fi + +\ +.PHONY: install-target-gperf +install-target-gperf: installdirs + @dir=gperf ; \ + if [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/gperf; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-examples +configure-target-examples: + @if [ -d $(TARGET_SUBDIR)/examples ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/examples/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/examples/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/examples/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/examples/multilib.out $(TARGET_SUBDIR)/examples/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/examples/tmpmulti.out; \ + else \ + echo "Multilibs changed for examples, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/examples/multilib.out $(TARGET_SUBDIR)/examples/Makefile; \ + mv $(TARGET_SUBDIR)/examples/tmpmulti.out $(TARGET_SUBDIR)/examples/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/examples/tmpmulti.out $(TARGET_SUBDIR)/examples/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=examples ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/examples/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " examples " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/examples ]; then \ + [ -d $(TARGET_SUBDIR)/examples ] || mkdir $(TARGET_SUBDIR)/examples;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/examples; \ + cd "$(TARGET_SUBDIR)/examples" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/examples "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/examples"; \ + libsrcdir="$$s/examples"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir examples || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-examples +all-target-examples: + @dir=examples ; \ + if [ -f $(TARGET_SUBDIR)/examples/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/examples; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + + + +.PHONY: configure-target-libffi +configure-target-libffi: + @if [ -d $(TARGET_SUBDIR)/libffi ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libffi/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/libffi/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/libffi/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/libffi/multilib.out $(TARGET_SUBDIR)/libffi/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/libffi/tmpmulti.out; \ + else \ + echo "Multilibs changed for libffi, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/libffi/multilib.out $(TARGET_SUBDIR)/libffi/Makefile; \ + mv $(TARGET_SUBDIR)/libffi/tmpmulti.out $(TARGET_SUBDIR)/libffi/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/libffi/tmpmulti.out $(TARGET_SUBDIR)/libffi/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=libffi ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/libffi/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " libffi " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/libffi ]; then \ + [ -d $(TARGET_SUBDIR)/libffi ] || mkdir $(TARGET_SUBDIR)/libffi;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libffi; \ + cd "$(TARGET_SUBDIR)/libffi" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/libffi "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/libffi"; \ + libsrcdir="$$s/libffi"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir libffi || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-libffi +all-target-libffi: + @dir=libffi ; \ + if [ -f $(TARGET_SUBDIR)/libffi/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libffi; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +.PHONY: check-target-libffi +check-target-libffi: + @dir=libffi ; \ + if [ -f $(TARGET_SUBDIR)/libffi/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libffi; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + else \ + true; \ + fi + + + +.PHONY: configure-target-libjava +configure-target-libjava: + @if [ -d $(TARGET_SUBDIR)/libjava ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libjava/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/libjava/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/libjava/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/libjava/multilib.out $(TARGET_SUBDIR)/libjava/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/libjava/tmpmulti.out; \ + else \ + echo "Multilibs changed for libjava, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/libjava/multilib.out $(TARGET_SUBDIR)/libjava/Makefile; \ + mv $(TARGET_SUBDIR)/libjava/tmpmulti.out $(TARGET_SUBDIR)/libjava/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/libjava/tmpmulti.out $(TARGET_SUBDIR)/libjava/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=libjava ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " libjava " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/libjava ]; then \ + [ -d $(TARGET_SUBDIR)/libjava ] || mkdir $(TARGET_SUBDIR)/libjava;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libjava; \ + cd "$(TARGET_SUBDIR)/libjava" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/libjava "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/libjava"; \ + libsrcdir="$$s/libjava"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir libjava || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi + +.PHONY: all-target-libjava +all-target-libjava: + @dir=libjava ; \ + if [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libjava; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + else \ + true; \ + fi + +.PHONY: check-target-libjava +check-target-libjava: + @dir=libjava ; \ + if [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libjava; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + else \ + true; \ + fi + +\ +.PHONY: install-target-libjava +install-target-libjava: installdirs + @dir=libjava ; \ + if [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libjava; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-zlib +configure-target-zlib: + @if [ -d $(TARGET_SUBDIR)/zlib ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/zlib/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/zlib/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/zlib/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/zlib/multilib.out $(TARGET_SUBDIR)/zlib/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/zlib/tmpmulti.out; \ + else \ + echo "Multilibs changed for zlib, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/zlib/multilib.out $(TARGET_SUBDIR)/zlib/Makefile; \ + mv $(TARGET_SUBDIR)/zlib/tmpmulti.out $(TARGET_SUBDIR)/zlib/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/zlib/tmpmulti.out $(TARGET_SUBDIR)/zlib/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=zlib ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " zlib " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/zlib ]; then \ + [ -d $(TARGET_SUBDIR)/zlib ] || mkdir $(TARGET_SUBDIR)/zlib;\ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/zlib; \ + cd "$(TARGET_SUBDIR)/zlib" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/zlib "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/zlib"; \ + libsrcdir="$$s/zlib"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir zlib || true; \ + else \ + true; \ + fi; \ + else \ + true; \ + fi; \ + else \ + true; \ fi -.PHONY: install.all -install.all: install-no-fixedincludes - @if [ -f ./gcc/Makefile ] ; then \ - r=`${PWD}` ; export r ; \ - $(SET_LIB_PATH) \ - (cd ./gcc; \ - $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \ +.PHONY: all-target-zlib +all-target-zlib: + @dir=zlib ; \ + if [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/zlib; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ else \ - true ; \ + true; \ fi -# install-no-fixedincludes is used because Cygnus can not distribute -# the fixed header files. -.PHONY: install-no-fixedincludes -install-no-fixedincludes: \ - installdirs \ - $(INSTALL_MODULES) \ - $(INSTALL_TARGET_MODULES) \ - $(INSTALL_X11_MODULES) \ - gcc-no-fixedincludes - -# Install the gcc headers files, but not the fixed include files, -# which Cygnus is not allowed to distribute. This rule is very -# dependent on the workings of the gcc Makefile.in. -.PHONY: gcc-no-fixedincludes -gcc-no-fixedincludes: - @if [ -f ./gcc/Makefile ]; then \ - rm -rf gcc/tmp-include; \ - mv gcc/include gcc/tmp-include 2>/dev/null; \ - mkdir gcc/include; \ - cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \ - touch gcc/stmp-fixinc gcc/include/fixed; \ - rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \ +.PHONY: check-target-zlib +check-target-zlib: + @dir=zlib ; \ + if [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \ r=`${PWD}`; export r; \ - s=`cd $(srcdir); ${PWD}` ; export s; \ + s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ - (cd ./gcc; \ - $(MAKE) $(GCC_FLAGS_TO_PASS) install); \ - rm -rf gcc/include; \ - mv gcc/tmp-include gcc/include 2>/dev/null; \ - else true; fi + (cd $(TARGET_SUBDIR)/zlib; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + else \ + true; \ + fi -# This rule is used to build the modules which are built with the -# build machine's native compiler. -.PHONY: $(ALL_BUILD_MODULES) -$(ALL_BUILD_MODULES): - dir=`echo $@ | sed -e 's/all-build-//'`; \ - if [ -f ./$${dir}/Makefile ] ; then \ +\ +.PHONY: install-target-zlib +install-target-zlib: installdirs + @dir=zlib ; \ + if [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ - (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/zlib; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ else \ true; \ fi -# This rule is used to configure the modules which are built with the -# native tools. -.PHONY: $(CONFIGURE_BUILD_MODULES) -$(CONFIGURE_BUILD_MODULES): - @dir=`echo $@ | sed -e 's/configure-build-//'`; \ - if [ ! -d $(BUILD_SUBDIR) ]; then \ + +.PHONY: configure-target-boehm-gc +configure-target-boehm-gc: + @if [ -d $(TARGET_SUBDIR)/boehm-gc ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/boehm-gc/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/boehm-gc/multilib.out $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out; \ + else \ + echo "Multilibs changed for boehm-gc, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/boehm-gc/multilib.out $(TARGET_SUBDIR)/boehm-gc/Makefile; \ + mv $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out $(TARGET_SUBDIR)/boehm-gc/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out $(TARGET_SUBDIR)/boehm-gc/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=boehm-gc ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ true; \ - elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \ + elif [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \ true; \ - elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \ - if [ -d $(srcdir)/$${dir} ]; then \ - [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\ + elif echo " $(TARGET_CONFIGDIRS) " | grep " boehm-gc " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/boehm-gc ]; then \ + [ -d $(TARGET_SUBDIR)/boehm-gc ] || mkdir $(TARGET_SUBDIR)/boehm-gc;\ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ - AR="$(AR_FOR_BUILD)"; export AR; \ - AS="$(AS_FOR_BUILD)"; export AS; \ - CC="$(CC_FOR_BUILD)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \ - CXX="$(CXX_FOR_BUILD)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \ - LD="$(LD_FOR_BUILD)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \ - NM="$(NM_FOR_BUILD)"; export NM; \ - RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \ - echo Configuring in $(BUILD_SUBDIR)/$${dir}; \ - cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/boehm-gc; \ + cd "$(TARGET_SUBDIR)/boehm-gc" || exit 1; \ case $(srcdir) in \ /* | [A-Za-z]:[\\/]*) \ topdir=$(srcdir) ;; \ *) \ - case "$(BUILD_SUBDIR)" in \ + case "$(TARGET_SUBDIR)" in \ .) topdir="../$(srcdir)" ;; \ *) topdir="../../$(srcdir)" ;; \ esac ;; \ esac; \ if [ "$(srcdir)" = "." ] ; then \ - if [ "$(BUILD_SUBDIR)" != "." ] ; then \ - if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/boehm-gc "no-such-file" ; then \ if [ -f Makefile ]; then \ if $(MAKE) distclean; then \ true; \ @@ -1266,24 +3602,24 @@ $(CONFIGURE_BUILD_MODULES): srcdiroption="--srcdir=."; \ libsrcdir="."; \ else \ - srcdiroption="--srcdir=$${topdir}/$${dir}"; \ - libsrcdir="$$s/$${dir}"; \ + srcdiroption="--srcdir=$${topdir}/boehm-gc"; \ + libsrcdir="$$s/boehm-gc"; \ fi; \ if [ -f $${libsrcdir}/configure ] ; then \ rm -f no-such-file skip-this-dir; \ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(BUILD_CONFIGARGS) $${srcdiroption} \ - --with-build-subdir="$(BUILD_SUBDIR)"; \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ else \ rm -f no-such-file skip-this-dir; \ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ - $(BUILD_CONFIGARGS) $${srcdiroption} \ - --with-build-subdir="$(BUILD_SUBDIR)"; \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ fi || exit 1; \ if [ -f skip-this-dir ] ; then \ sh skip-this-dir; \ rm -f skip-this-dir; \ - cd ..; rmdir $${dir} || true; \ + cd ..; rmdir boehm-gc || true; \ else \ true; \ fi; \ @@ -1294,93 +3630,218 @@ $(CONFIGURE_BUILD_MODULES): true; \ fi -# This rule is used to build the modules which use FLAGS_TO_PASS. To -# build a target all-X means to cd to X and make all. -.PHONY: $(ALL_MODULES) -$(ALL_MODULES): - @dir=`echo $@ | sed -e 's/all-//'`; \ - if [ -f ./$${dir}/Makefile ] ; then \ +.PHONY: all-target-boehm-gc +all-target-boehm-gc: + @dir=boehm-gc ; \ + if [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ - (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \ + (cd $(TARGET_SUBDIR)/boehm-gc; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ else \ true; \ fi -# These rules are used to check the modules which use FLAGS_TO_PASS. -# To build a target check-X means to cd to X and make check. Some -# modules are only tested in a native toolchain. +.PHONY: check-target-boehm-gc +check-target-boehm-gc: + @dir=boehm-gc ; \ + if [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/boehm-gc; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ + else \ + true; \ + fi -.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES) -$(NATIVE_CHECK_MODULES): - @if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ - dir=`echo $@ | sed -e 's/check-//'`; \ - if [ -f ./$${dir}/Makefile ] ; then \ +\ +.PHONY: install-target-boehm-gc +install-target-boehm-gc: installdirs + @dir=boehm-gc ; \ + if [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \ + r=`${PWD}`; export r; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/boehm-gc; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-qthreads +configure-target-qthreads: + @if [ -d $(TARGET_SUBDIR)/qthreads ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/qthreads/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/qthreads/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/qthreads/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/qthreads/multilib.out $(TARGET_SUBDIR)/qthreads/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/qthreads/tmpmulti.out; \ + else \ + echo "Multilibs changed for qthreads, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/qthreads/multilib.out $(TARGET_SUBDIR)/qthreads/Makefile; \ + mv $(TARGET_SUBDIR)/qthreads/tmpmulti.out $(TARGET_SUBDIR)/qthreads/multilib.out; \ + fi; \ + else \ + mv $(TARGET_SUBDIR)/qthreads/tmpmulti.out $(TARGET_SUBDIR)/qthreads/multilib.out; \ + fi; \ + fi; \ + fi; exit 0 # break command into two pieces + @dir=qthreads ; \ + if [ ! -d $(TARGET_SUBDIR) ]; then \ + true; \ + elif [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " qthreads " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/qthreads ]; then \ + [ -d $(TARGET_SUBDIR)/qthreads ] || mkdir $(TARGET_SUBDIR)/qthreads;\ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ - (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/qthreads; \ + cd "$(TARGET_SUBDIR)/qthreads" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/qthreads "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/qthreads"; \ + libsrcdir="$$s/qthreads"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + rm -f no-such-file skip-this-dir; \ + CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi || exit 1; \ + if [ -f skip-this-dir ] ; then \ + sh skip-this-dir; \ + rm -f skip-this-dir; \ + cd ..; rmdir qthreads || true; \ + else \ + true; \ + fi; \ else \ true; \ fi; \ + else \ + true; \ fi -$(CROSS_CHECK_MODULES): - @dir=`echo $@ | sed -e 's/check-//'`; \ - if [ -f ./$${dir}/Makefile ] ; then \ +.PHONY: all-target-qthreads +all-target-qthreads: + @dir=qthreads ; \ + if [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ - (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \ + (cd $(TARGET_SUBDIR)/qthreads; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ else \ true; \ fi -# This rule is used to install the modules which use FLAGS_TO_PASS. -# To build a target install-X means to cd to X and make install. -.PHONY: $(INSTALL_MODULES) -$(INSTALL_MODULES): installdirs - @dir=`echo $@ | sed -e 's/install-//'`; \ - if [ -f ./$${dir}/Makefile ] ; then \ +.PHONY: check-target-qthreads +check-target-qthreads: + @dir=qthreads ; \ + if [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ - (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \ + (cd $(TARGET_SUBDIR)/qthreads; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ else \ true; \ fi -# This rule is used to configure the modules which are built with the -# target tools. -.PHONY: $(CONFIGURE_TARGET_MODULES) -$(CONFIGURE_TARGET_MODULES): - @dir=`echo $@ | sed -e 's/configure-target-//'`; \ - if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \ +\ +.PHONY: install-target-qthreads +install-target-qthreads: installdirs + @dir=qthreads ; \ + if [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \ r=`${PWD}`; export r; \ - $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \ - if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \ - if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \ - if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \ - rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \ + s=`cd $(srcdir); ${PWD}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/qthreads; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + + +.PHONY: configure-target-rda +configure-target-rda: + @if [ -d $(TARGET_SUBDIR)/rda ]; then \ + r=`${PWD}`; export r; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/rda/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/rda/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/rda/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/rda/multilib.out $(TARGET_SUBDIR)/rda/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/rda/tmpmulti.out; \ else \ - echo "Multilibs changed for $${dir}, reconfiguring"; \ - rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \ - mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \ + echo "Multilibs changed for rda, reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/rda/multilib.out $(TARGET_SUBDIR)/rda/Makefile; \ + mv $(TARGET_SUBDIR)/rda/tmpmulti.out $(TARGET_SUBDIR)/rda/multilib.out; \ fi; \ else \ - mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \ + mv $(TARGET_SUBDIR)/rda/tmpmulti.out $(TARGET_SUBDIR)/rda/multilib.out; \ fi; \ fi; \ fi; exit 0 # break command into two pieces - @dir=`echo $@ | sed -e 's/configure-target-//'`; \ + @dir=rda ; \ if [ ! -d $(TARGET_SUBDIR) ]; then \ true; \ - elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ + elif [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \ true; \ - elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \ - if [ -d $(srcdir)/$${dir} ]; then \ - [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\ + elif echo " $(TARGET_CONFIGDIRS) " | grep " rda " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/rda ]; then \ + [ -d $(TARGET_SUBDIR)/rda ] || mkdir $(TARGET_SUBDIR)/rda;\ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ @@ -1397,8 +3858,8 @@ $(CONFIGURE_TARGET_MODULES): NM="$(NM_FOR_TARGET)"; export NM; \ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/$${dir}; \ - cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \ + echo Configuring in $(TARGET_SUBDIR)/rda; \ + cd "$(TARGET_SUBDIR)/rda" || exit 1; \ case $(srcdir) in \ /* | [A-Za-z]:[\\/]*) \ topdir=$(srcdir) ;; \ @@ -1410,7 +3871,7 @@ $(CONFIGURE_TARGET_MODULES): esac; \ if [ "$(srcdir)" = "." ] ; then \ if [ "$(TARGET_SUBDIR)" != "." ] ; then \ - if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/rda "no-such-file" ; then \ if [ -f Makefile ]; then \ if $(MAKE) distclean; then \ true; \ @@ -1429,8 +3890,8 @@ $(CONFIGURE_TARGET_MODULES): srcdiroption="--srcdir=."; \ libsrcdir="."; \ else \ - srcdiroption="--srcdir=$${topdir}/$${dir}"; \ - libsrcdir="$$s/$${dir}"; \ + srcdiroption="--srcdir=$${topdir}/rda"; \ + libsrcdir="$$s/rda"; \ fi; \ if [ -f $${libsrcdir}/configure ] ; then \ rm -f no-such-file skip-this-dir; \ @@ -1446,7 +3907,7 @@ $(CONFIGURE_TARGET_MODULES): if [ -f skip-this-dir ] ; then \ sh skip-this-dir; \ rm -f skip-this-dir; \ - cd ..; rmdir $${dir} || true; \ + cd ..; rmdir rda || true; \ else \ true; \ fi; \ @@ -1457,52 +3918,48 @@ $(CONFIGURE_TARGET_MODULES): true; \ fi -# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS. -# To build a target all-X means to cd to X and make all. -.PHONY: $(ALL_TARGET_MODULES) -$(ALL_TARGET_MODULES): - @dir=`echo $@ | sed -e 's/all-target-//'`; \ - if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ +.PHONY: all-target-rda +all-target-rda: + @dir=rda ; \ + if [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/$${dir}; \ + (cd $(TARGET_SUBDIR)/rda; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ else \ true; \ fi -# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS. -# To build a target install-X means to cd to X and make install. -.PHONY: $(CHECK_TARGET_MODULES) -$(CHECK_TARGET_MODULES): - @dir=`echo $@ | sed -e 's/check-target-//'`; \ - if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ +.PHONY: check-target-rda +check-target-rda: + @dir=rda ; \ + if [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/$${dir}; \ + (cd $(TARGET_SUBDIR)/rda; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ else \ true; \ fi -# This rule is used to install the modules which use -# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X -# and make install. -.PHONY: $(INSTALL_TARGET_MODULES) -$(INSTALL_TARGET_MODULES): installdirs - @dir=`echo $@ | sed -e 's/install-target-//'`; \ - if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ +\ +.PHONY: install-target-rda +install-target-rda: installdirs + @dir=rda ; \ + if [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/$${dir}; \ + (cd $(TARGET_SUBDIR)/rda; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ else \ true; \ fi + + # This rule is used to build the modules which use X11_FLAGS_TO_PASS. # To build a target all-X means to cd to X and make all. .PHONY: $(ALL_X11_MODULES) diff --git a/Makefile.tpl b/Makefile.tpl index 33e9ebc30cb..bc467ce6c3a 100644 --- a/Makefile.tpl +++ b/Makefile.tpl @@ -652,20 +652,10 @@ all.normal: \ # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once, # because it is so large that it can easily overflow the command line # length limit on some systems. -DO_X = \ - do-clean \ - do-distclean \ - do-dvi \ - do-info \ - do-install-info \ - do-installcheck \ - do-mostlyclean \ - do-maintainer-clean \ - do-TAGS -.PHONY: $(DO_X) -$(DO_X): - @target=`echo $@ | sed -e 's/^do-//'`; \ - r=`${PWD}`; export r; \ +[+ FOR recursive_targets +] +.PHONY: do-[+target+] +do-[+target+]: + @r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ for i in $(SUBDIRS) -dummy-; do \ @@ -687,11 +677,11 @@ $(DO_X): "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - $${target}); \ + [+target+]); \ then true; else exit 1; fi; \ else true; fi; \ done - @target=`echo $@ | sed -e 's/^do-//'`; \ + # Break into two pieces r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ @@ -705,10 +695,12 @@ $(DO_X): "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - $${target}); \ + [+target+]); \ then true; else exit 1; fi; \ else true; fi; \ done +[+ ENDFOR recursive_targets +] + # Here are the targets which correspond to the do-X targets. @@ -884,31 +876,28 @@ gcc-no-fixedincludes: mv gcc/tmp-include gcc/include 2>/dev/null; \ else true; fi -# This rule is used to build the modules which are built with the +# These rules are used to build the modules which are built with the # build machine's native compiler. -.PHONY: $(ALL_BUILD_MODULES) -$(ALL_BUILD_MODULES): - dir=`echo $@ | sed -e 's/all-build-//'`; \ - if [ -f ./$${dir}/Makefile ] ; then \ +[+ FOR build_modules +] +.PHONY: all-build-[+module+] +all-build-[+module+]: + @if [ -f ./[+module+]/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ - (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \ + (cd $(BUILD_SUBDIR)/[+module+] && $(MAKE) all); \ else \ true; \ fi -# This rule is used to configure the modules which are built with the -# native tools. -.PHONY: $(CONFIGURE_BUILD_MODULES) -$(CONFIGURE_BUILD_MODULES): - @dir=`echo $@ | sed -e 's/configure-build-//'`; \ - if [ ! -d $(BUILD_SUBDIR) ]; then \ +.PHONY: configure-build-[+module+] +configure-build-[+module+]: + @if [ ! -d $(BUILD_SUBDIR) ]; then \ true; \ - elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \ + elif [ -f $(BUILD_SUBDIR)/[+module+]/Makefile ] ; then \ true; \ - elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \ - if [ -d $(srcdir)/$${dir} ]; then \ - [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\ + elif echo " $(BUILD_CONFIGDIRS) " | grep " [+module+] " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/[+module+] ]; then \ + [ -d $(BUILD_SUBDIR)/[+module+] ] || mkdir $(BUILD_SUBDIR)/[+module+];\ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ AR="$(AR_FOR_BUILD)"; export AR; \ @@ -924,8 +913,8 @@ $(CONFIGURE_BUILD_MODULES): NM="$(NM_FOR_BUILD)"; export NM; \ RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \ WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \ - echo Configuring in $(BUILD_SUBDIR)/$${dir}; \ - cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \ + echo Configuring in $(BUILD_SUBDIR)/[+module+]; \ + cd "$(BUILD_SUBDIR)/[+module+]" || exit 1; \ case $(srcdir) in \ /* | [A-Za-z]:[\\/]*) \ topdir=$(srcdir) ;; \ @@ -937,7 +926,7 @@ $(CONFIGURE_BUILD_MODULES): esac; \ if [ "$(srcdir)" = "." ] ; then \ if [ "$(BUILD_SUBDIR)" != "." ] ; then \ - if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/[+module+] "no-such-file" ; then \ if [ -f Makefile ]; then \ if $(MAKE) distclean; then \ true; \ @@ -956,8 +945,8 @@ $(CONFIGURE_BUILD_MODULES): srcdiroption="--srcdir=."; \ libsrcdir="."; \ else \ - srcdiroption="--srcdir=$${topdir}/$${dir}"; \ - libsrcdir="$$s/$${dir}"; \ + srcdiroption="--srcdir=$${topdir}/[+module+]"; \ + libsrcdir="$$s/[+module+]"; \ fi; \ if [ -f $${libsrcdir}/configure ] ; then \ rm -f no-such-file skip-this-dir; \ @@ -973,7 +962,7 @@ $(CONFIGURE_BUILD_MODULES): if [ -f skip-this-dir ] ; then \ sh skip-this-dir; \ rm -f skip-this-dir; \ - cd ..; rmdir $${dir} || true; \ + cd ..; rmdir [+module+] || true; \ else \ true; \ fi; \ @@ -983,6 +972,7 @@ $(CONFIGURE_BUILD_MODULES): else \ true; \ fi +[+ ENDFOR build_modules +] # This rule is used to build the modules which use FLAGS_TO_PASS. To # build a target all-X means to cd to X and make all. @@ -1041,36 +1031,36 @@ $(INSTALL_MODULES): installdirs true; \ fi -# This rule is used to configure the modules which are built with the -# target tools. -.PHONY: $(CONFIGURE_TARGET_MODULES) -$(CONFIGURE_TARGET_MODULES): - @dir=`echo $@ | sed -e 's/configure-target-//'`; \ - if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \ +# These rules are used to build the modules which are built with the target +# tools. To make foo-X means to cd to X and make foo. +[+ FOR target_modules +] +.PHONY: configure-target-[+module+] +configure-target-[+module+]: + @if [ -d $(TARGET_SUBDIR)/[+module+] ]; then \ r=`${PWD}`; export r; \ - $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \ - if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \ - if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \ - if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \ - rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \ + $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/[+module+]/tmpmulti.out 2> /dev/null; \ + if [ -s $(TARGET_SUBDIR)/[+module+]/tmpmulti.out ]; then \ + if [ -f $(TARGET_SUBDIR)/[+module+]/multilib.out ]; then \ + if cmp $(TARGET_SUBDIR)/[+module+]/multilib.out $(TARGET_SUBDIR)/[+module+]/tmpmulti.out > /dev/null; then \ + rm -f $(TARGET_SUBDIR)/[+module+]/tmpmulti.out; \ else \ - echo "Multilibs changed for $${dir}, reconfiguring"; \ - rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \ - mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \ + echo "Multilibs changed for [+module+], reconfiguring"; \ + rm -f $(TARGET_SUBDIR)/[+module+]/multilib.out $(TARGET_SUBDIR)/[+module+]/Makefile; \ + mv $(TARGET_SUBDIR)/[+module+]/tmpmulti.out $(TARGET_SUBDIR)/[+module+]/multilib.out; \ fi; \ else \ - mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \ + mv $(TARGET_SUBDIR)/[+module+]/tmpmulti.out $(TARGET_SUBDIR)/[+module+]/multilib.out; \ fi; \ fi; \ fi; exit 0 # break command into two pieces - @dir=`echo $@ | sed -e 's/configure-target-//'`; \ + @dir=[+module+] ; \ if [ ! -d $(TARGET_SUBDIR) ]; then \ true; \ - elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ + elif [ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] ; then \ true; \ - elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \ - if [ -d $(srcdir)/$${dir} ]; then \ - [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\ + elif echo " $(TARGET_CONFIGDIRS) " | grep " [+module+] " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/[+module+] ]; then \ + [ -d $(TARGET_SUBDIR)/[+module+] ] || mkdir $(TARGET_SUBDIR)/[+module+];\ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ @@ -1087,8 +1077,8 @@ $(CONFIGURE_TARGET_MODULES): NM="$(NM_FOR_TARGET)"; export NM; \ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/$${dir}; \ - cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \ + echo Configuring in $(TARGET_SUBDIR)/[+module+]; \ + cd "$(TARGET_SUBDIR)/[+module+]" || exit 1; \ case $(srcdir) in \ /* | [A-Za-z]:[\\/]*) \ topdir=$(srcdir) ;; \ @@ -1100,7 +1090,7 @@ $(CONFIGURE_TARGET_MODULES): esac; \ if [ "$(srcdir)" = "." ] ; then \ if [ "$(TARGET_SUBDIR)" != "." ] ; then \ - if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/[+module+] "no-such-file" ; then \ if [ -f Makefile ]; then \ if $(MAKE) distclean; then \ true; \ @@ -1119,8 +1109,8 @@ $(CONFIGURE_TARGET_MODULES): srcdiroption="--srcdir=."; \ libsrcdir="."; \ else \ - srcdiroption="--srcdir=$${topdir}/$${dir}"; \ - libsrcdir="$$s/$${dir}"; \ + srcdiroption="--srcdir=$${topdir}/[+module+]"; \ + libsrcdir="$$s/[+module+]"; \ fi; \ if [ -f $${libsrcdir}/configure ] ; then \ rm -f no-such-file skip-this-dir; \ @@ -1136,7 +1126,7 @@ $(CONFIGURE_TARGET_MODULES): if [ -f skip-this-dir ] ; then \ sh skip-this-dir; \ rm -f skip-this-dir; \ - cd ..; rmdir $${dir} || true; \ + cd ..; rmdir [+module+] || true; \ else \ true; \ fi; \ @@ -1147,51 +1137,47 @@ $(CONFIGURE_TARGET_MODULES): true; \ fi -# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS. -# To build a target all-X means to cd to X and make all. -.PHONY: $(ALL_TARGET_MODULES) -$(ALL_TARGET_MODULES): - @dir=`echo $@ | sed -e 's/all-target-//'`; \ - if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ +.PHONY: all-target-[+module+] +all-target-[+module+]: + @dir=[+module+] ; \ + if [ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/$${dir}; \ + (cd $(TARGET_SUBDIR)/[+module+]; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ else \ true; \ fi - -# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS. -# To build a target install-X means to cd to X and make install. -.PHONY: $(CHECK_TARGET_MODULES) -$(CHECK_TARGET_MODULES): - @dir=`echo $@ | sed -e 's/check-target-//'`; \ - if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ +[+ IF no_check +][+ ELSE check +] +.PHONY: check-target-[+module+] +check-target-[+module+]: + @dir=[+module+] ; \ + if [ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/$${dir}; \ + (cd $(TARGET_SUBDIR)/[+module+]; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ else \ true; \ fi - -# This rule is used to install the modules which use -# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X -# and make install. -.PHONY: $(INSTALL_TARGET_MODULES) -$(INSTALL_TARGET_MODULES): installdirs - @dir=`echo $@ | sed -e 's/install-target-//'`; \ - if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ +[+ ENDIF no_check +] +[+ IF no_install +][+ ELSE install +]\ +.PHONY: install-target-[+module+] +install-target-[+module+]: installdirs + @dir=[+module+] ; \ + if [ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/$${dir}; \ + (cd $(TARGET_SUBDIR)/[+module+]; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ else \ true; \ fi +[+ ENDIF no_install +] +[+ ENDFOR target_modules +] # This rule is used to build the modules which use X11_FLAGS_TO_PASS. # To build a target all-X means to cd to X and make all.