From: Christopher L. Conway Date: Thu, 28 Jan 2010 17:38:25 +0000 (+0000) Subject: Replacing hand-coded autogen.sh with buildconf version X-Git-Tag: cvc5-1.0.0~9333 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=e4737caa097059882d35e2fab5eed230f1b21cc9;p=cvc5.git Replacing hand-coded autogen.sh with buildconf version --- diff --git a/autogen.sh b/autogen.sh index 70e6ff98a..5bce9bab3 100755 --- a/autogen.sh +++ b/autogen.sh @@ -1,42 +1,1578 @@ #!/bin/sh +# a u t o g e n . s h +# +# Copyright (c) 2005-2009 United States Government as represented by +# the U.S. Army Research Laboratory. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials provided +# with the distribution. +# +# 3. The name of the author may not be used to endorse or promote +# products derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS +# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY +# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE +# GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +### +# +# Script for automatically preparing the sources for compilation by +# performing the myriad of necessary steps. The script attempts to +# detect proper version support, and outputs warnings about particular +# systems that have autotool peculiarities. +# +# Basically, if everything is set up and installed correctly, the +# script will validate that minimum versions of the GNU Build System +# tools are installed, account for several common configuration +# issues, and then simply run autoreconf for you. +# +# If autoreconf fails, which can happen for many valid configurations, +# this script proceeds to run manual preparation steps effectively +# providing a POSIX shell script (mostly complete) reimplementation of +# autoreconf. +# +# The AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER +# environment variables and corresponding _OPTIONS variables (e.g. +# AUTORECONF_OPTIONS) may be used to override the default automatic +# detection behaviors. Similarly the _VERSION variables will override +# the minimum required version numbers. +# +# Examples: +# +# To obtain help on usage: +# ./autogen.sh --help +# +# To obtain verbose output: +# ./autogen.sh --verbose +# +# To skip autoreconf and prepare manually: +# AUTORECONF=false ./autogen.sh +# +# To verbosely try running with an older (unsupported) autoconf: +# AUTOCONF_VERSION=2.50 ./autogen.sh --verbose +# +# Author: +# Christopher Sean Morrison +# +# Patches: +# Sebastian Pipping +# +###################################################################### + +# set to minimum acceptable version of autoconf +if [ "x$AUTOCONF_VERSION" = "x" ] ; then + AUTOCONF_VERSION=2.52 +fi +# set to minimum acceptable version of automake +if [ "x$AUTOMAKE_VERSION" = "x" ] ; then + AUTOMAKE_VERSION=1.6.0 +fi +# set to minimum acceptable version of libtool +if [ "x$LIBTOOL_VERSION" = "x" ] ; then + LIBTOOL_VERSION=1.4.2 +fi + + +################## +# ident function # +################## +ident ( ) { + # extract copyright from header + __copyright="`grep Copyright $AUTOGEN_SH | head -${HEAD_N}1 | awk '{print $4}'`" + if [ "x$__copyright" = "x" ] ; then + __copyright="`date +%Y`" + fi + + # extract version from CVS Id string + __id="$Id: autogen.sh 33925 2009-03-01 23:27:06Z brlcad $" + __version="`echo $__id | sed 's/.*\([0-9][0-9][0-9][0-9]\)[-\/]\([0-9][0-9]\)[-\/]\([0-9][0-9]\).*/\1\2\3/'`" + if [ "x$__version" = "x" ] ; then + __version="" + fi + + echo "autogen.sh build preparation script by Christopher Sean Morrison" + echo " + config.guess download patch by Sebastian Pipping (2008-12-03)" + echo "revised 3-clause BSD-style license, copyright (c) $__copyright" + echo "script version $__version, ISO/IEC 9945 POSIX shell script" +} + + +################## +# USAGE FUNCTION # +################## +usage ( ) { + echo "Usage: $AUTOGEN_SH [-h|--help] [-v|--verbose] [-q|--quiet] [-d|--download] [--version]" + echo " --help Help on $NAME_OF_AUTOGEN usage" + echo " --verbose Verbose progress output" + echo " --quiet Quiet suppressed progress output" + echo " --download Download the latest config.guess from gnulib" + echo " --version Only perform GNU Build System version checks" + echo + echo "Description: This script will validate that minimum versions of the" + echo "GNU Build System tools are installed and then run autoreconf for you." + echo "Should autoreconf fail, manual preparation steps will be run" + echo "potentially accounting for several common preparation issues. The" + + echo "AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER," + echo "PROJECT, & CONFIGURE environment variables and corresponding _OPTIONS" + echo "variables (e.g. AUTORECONF_OPTIONS) may be used to override the" + echo "default automatic detection behavior." + echo + + ident -# Expected versions of tools. -# -# If the installed autotools aren't these versions, issue a warning -# about checking results into subversion. -libtoolize_version='libtoolize (GNU libtool) 2.2.6' -aclocal_version='aclocal (GNU automake) 1.11' -autoheader_version='autoheader (GNU Autoconf) 2.64' -autoconf_version='autoconf (GNU Autoconf) 2.64' -automake_version='automake (GNU automake) 1.11' - -# first, check versions of tools - -warning= -for tool in libtoolize autoheader aclocal autoconf automake; do - version=`eval echo '${'$tool'_version}'` - if $tool --version | grep -Fq "$version"; then :; else - echo "WARNING: [$tool] Expected $version." - warning=yes - fi + return 0 +} + + +########################## +# VERSION_ERROR FUNCTION # +########################## +version_error ( ) { + if [ "x$1" = "x" ] ; then + echo "INTERNAL ERROR: version_error was not provided a version" + exit 1 + fi + if [ "x$2" = "x" ] ; then + echo "INTERNAL ERROR: version_error was not provided an application name" + exit 1 + fi + $ECHO + $ECHO "ERROR: To prepare the ${PROJECT} build system from scratch," + $ECHO " at least version $1 of $2 must be installed." + $ECHO + $ECHO "$NAME_OF_AUTOGEN does not need to be run on the same machine that will" + $ECHO "run configure or make. Either the GNU Autotools will need to be installed" + $ECHO "or upgraded on this system, or $NAME_OF_AUTOGEN must be run on the source" + $ECHO "code on another system and then transferred to here. -- Cheers!" + $ECHO +} + +########################## +# VERSION_CHECK FUNCTION # +########################## +version_check ( ) { + if [ "x$1" = "x" ] ; then + echo "INTERNAL ERROR: version_check was not provided a minimum version" + exit 1 + fi + _min="$1" + if [ "x$2" = "x" ] ; then + echo "INTERNAL ERROR: version check was not provided a comparison version" + exit 1 + fi + _cur="$2" + + # needed to handle versions like 1.10 and 1.4-p6 + _min="`echo ${_min}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`" + _cur="`echo ${_cur}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`" + + _min_major="`echo $_min | cut -d. -f1`" + _min_minor="`echo $_min | cut -d. -f2`" + _min_patch="`echo $_min | cut -d. -f3`" + + _cur_major="`echo $_cur | cut -d. -f1`" + _cur_minor="`echo $_cur | cut -d. -f2`" + _cur_patch="`echo $_cur | cut -d. -f3`" + + if [ "x$_min_major" = "x" ] ; then + _min_major=0 + fi + if [ "x$_min_minor" = "x" ] ; then + _min_minor=0 + fi + if [ "x$_min_patch" = "x" ] ; then + _min_patch=0 + fi + if [ "x$_cur_minor" = "x" ] ; then + _cur_major=0 + fi + if [ "x$_cur_minor" = "x" ] ; then + _cur_minor=0 + fi + if [ "x$_cur_patch" = "x" ] ; then + _cur_patch=0 + fi + + $VERBOSE_ECHO "Checking if ${_cur_major}.${_cur_minor}.${_cur_patch} is greater than ${_min_major}.${_min_minor}.${_min_patch}" + + if [ $_min_major -lt $_cur_major ] ; then + return 0 + elif [ $_min_major -eq $_cur_major ] ; then + if [ $_min_minor -lt $_cur_minor ] ; then + return 0 + elif [ $_min_minor -eq $_cur_minor ] ; then + if [ $_min_patch -lt $_cur_patch ] ; then + return 0 + elif [ $_min_patch -eq $_cur_patch ] ; then + return 0 + fi + fi + fi + return 1 +} + + +###################################### +# LOCATE_CONFIGURE_TEMPLATE FUNCTION # +###################################### +locate_configure_template ( ) { + _pwd="`pwd`" + if test -f "./configure.ac" ; then + echo "./configure.ac" + elif test -f "./configure.in" ; then + echo "./configure.in" + elif test -f "$_pwd/configure.ac" ; then + echo "$_pwd/configure.ac" + elif test -f "$_pwd/configure.in" ; then + echo "$_pwd/configure.in" + elif test -f "$PATH_TO_AUTOGEN/configure.ac" ; then + echo "$PATH_TO_AUTOGEN/configure.ac" + elif test -f "$PATH_TO_AUTOGEN/configure.in" ; then + echo "$PATH_TO_AUTOGEN/configure.in" + fi +} + + +################## +# argument check # +################## +ARGS="$*" +PATH_TO_AUTOGEN="`dirname $0`" +NAME_OF_AUTOGEN="`basename $0`" +AUTOGEN_SH="$PATH_TO_AUTOGEN/$NAME_OF_AUTOGEN" + +LIBTOOL_M4="${PATH_TO_AUTOGEN}/misc/libtool.m4" + +if [ "x$HELP" = "x" ] ; then + HELP=no +fi +if [ "x$QUIET" = "x" ] ; then + QUIET=no +fi +if [ "x$VERBOSE" = "x" ] ; then + VERBOSE=no +fi +if [ "x$VERSION_ONLY" = "x" ] ; then + VERSION_ONLY=no +fi +if [ "x$DOWNLOAD" = "x" ] ; then + DOWNLOAD=no +fi +if [ "x$AUTORECONF_OPTIONS" = "x" ] ; then + AUTORECONF_OPTIONS="-i -f" +fi +if [ "x$AUTOCONF_OPTIONS" = "x" ] ; then + AUTOCONF_OPTIONS="-f" +fi +if [ "x$AUTOMAKE_OPTIONS" = "x" ] ; then + AUTOMAKE_OPTIONS="-a -c -f" +fi +ALT_AUTOMAKE_OPTIONS="-a -c" +if [ "x$LIBTOOLIZE_OPTIONS" = "x" ] ; then + LIBTOOLIZE_OPTIONS="--automake -c -f" +fi +ALT_LIBTOOLIZE_OPTIONS="--automake --copy --force" +if [ "x$ACLOCAL_OPTIONS" = "x" ] ; then + ACLOCAL_OPTIONS="" +fi +if [ "x$AUTOHEADER_OPTIONS" = "x" ] ; then + AUTOHEADER_OPTIONS="" +fi +if [ "x$CONFIG_GUESS_URL" = "x" ] ; then + CONFIG_GUESS_URL="http://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=blob_plain;f=build-aux/config.guess;hb=HEAD" +fi +for arg in $ARGS ; do + case "x$arg" in + x--help) HELP=yes ;; + x-[hH]) HELP=yes ;; + x--quiet) QUIET=yes ;; + x-[qQ]) QUIET=yes ;; + x--verbose) VERBOSE=yes ;; + x-[dD]) DOWNLOAD=yes ;; + x--download) DOWNLOAD=yes ;; + x-[vV]) VERBOSE=yes ;; + x--version) VERSION_ONLY=yes ;; + *) + echo "Unknown option: $arg" + echo + usage + exit 1 + ;; + esac done -if test -n "$warning"; then - echo "WARNING:" - echo "WARNING: Due to the above unexpected versions of autotools, please do not commit" - echo "WARNING: the files these tools generate to CVC4 svn." - echo + +##################### +# environment check # +##################### + +# sanity check before recursions potentially begin +if [ ! -f "$AUTOGEN_SH" ] ; then + echo "INTERNAL ERROR: $AUTOGEN_SH does not exist" + if [ ! "x$0" = "x$AUTOGEN_SH" ] ; then + echo "INTERNAL ERROR: dirname/basename inconsistency: $0 != $AUTOGEN_SH" + fi + exit 1 fi -# now do a standard autogen +# force locale setting to C so things like date output as expected +LC_ALL=C + +# commands that this script expects +for __cmd in echo head tail pwd ; do + echo "test" | $__cmd > /dev/null 2>&1 + if [ $? != 0 ] ; then + echo "INTERNAL ERROR: '${__cmd}' command is required" + exit 2 + fi +done +echo "test" | grep "test" > /dev/null 2>&1 +if test ! x$? = x0 ; then + echo "INTERNAL ERROR: grep command is required" + exit 1 +fi +echo "test" | sed "s/test/test/" > /dev/null 2>&1 +if test ! x$? = x0 ; then + echo "INTERNAL ERROR: sed command is required" + exit 1 +fi + + +# determine the behavior of echo +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +# determine the behavior of head +case "x`echo 'head' | head -n 1 2>&1`" in + *xhead*) HEAD_N="n " ;; + *) HEAD_N="" ;; +esac + +# determine the behavior of tail +case "x`echo 'tail' | tail -n 1 2>&1`" in + *xtail*) TAIL_N="n " ;; + *) TAIL_N="" ;; +esac + +VERBOSE_ECHO=: +ECHO=: +if [ "x$QUIET" = "xyes" ] ; then + if [ "x$VERBOSE" = "xyes" ] ; then + echo "Verbose output quelled by quiet option. Further output disabled." + fi +else + ECHO=echo + if [ "x$VERBOSE" = "xyes" ] ; then + echo "Verbose output enabled" + VERBOSE_ECHO=echo + fi +fi + + +# allow a recursive run to disable further recursions +if [ "x$RUN_RECURSIVE" = "x" ] ; then + RUN_RECURSIVE=yes +fi + + +################################################ +# check for help arg and bypass version checks # +################################################ +if [ "x`echo $ARGS | sed 's/.*[hH][eE][lL][pP].*/help/'`" = "xhelp" ] ; then + HELP=yes +fi +if [ "x$HELP" = "xyes" ] ; then + usage + $ECHO "---" + $ECHO "Help was requested. No preparation or configuration will be performed." + exit 0 +fi + + +####################### +# set up signal traps # +####################### +untrap_abnormal ( ) { + for sig in 1 2 13 15; do + trap - $sig + done +} + +# do this cleanup whenever we exit. +trap ' + # start from the root + if test -d "$START_PATH" ; then + cd "$START_PATH" + fi + + # restore/delete backup files + if test "x$PFC_INIT" = "x1" ; then + recursive_restore + fi +' 0 + +# trap SIGHUP (1), SIGINT (2), SIGPIPE (13), SIGTERM (15) +for sig in 1 2 13 15; do + trap ' + $ECHO "" + $ECHO "Aborting $NAME_OF_AUTOGEN: caught signal '$sig'" + + # start from the root + if test -d "$START_PATH" ; then + cd "$START_PATH" + fi + + # clean up on abnormal exit + $VERBOSE_ECHO "rm -rf autom4te.cache" + rm -rf autom4te.cache + + if test -f "acinclude.m4.$$.backup" ; then + $VERBOSE_ECHO "cat acinclude.m4.$$.backup > acinclude.m4" + chmod u+w acinclude.m4 + cat acinclude.m4.$$.backup > acinclude.m4 + + $VERBOSE_ECHO "rm -f acinclude.m4.$$.backup" + rm -f acinclude.m4.$$.backup + fi + + { (exit 1); exit 1; } +' $sig +done + + +############################# +# look for a configure file # +############################# +if [ "x$CONFIGURE" = "x" ] ; then + CONFIGURE="`locate_configure_template`" + if [ ! "x$CONFIGURE" = "x" ] ; then + $VERBOSE_ECHO "Found a configure template: $CONFIGURE" + fi +else + $ECHO "Using CONFIGURE environment variable override: $CONFIGURE" +fi +if [ "x$CONFIGURE" = "x" ] ; then + if [ "x$VERSION_ONLY" = "xyes" ] ; then + CONFIGURE=/dev/null + else + $ECHO + $ECHO "A configure.ac or configure.in file could not be located implying" + $ECHO "that the GNU Build System is at least not used in this directory. In" + $ECHO "any case, there is nothing to do here without one of those files." + $ECHO + $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`" + exit 1 + fi +fi + +#################### +# get project name # +#################### +if [ "x$PROJECT" = "x" ] ; then + PROJECT="`grep AC_INIT $CONFIGURE | grep -v '.*#.*AC_INIT' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_INIT(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + if [ "x$PROJECT" = "xAC_INIT" ] ; then + # projects might be using the older/deprecated arg-less AC_INIT .. look for AM_INIT_AUTOMAKE instead + PROJECT="`grep AM_INIT_AUTOMAKE $CONFIGURE | grep -v '.*#.*AM_INIT_AUTOMAKE' | tail -${TAIL_N}1 | sed 's/^[ ]*AM_INIT_AUTOMAKE(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + fi + if [ "x$PROJECT" = "xAM_INIT_AUTOMAKE" ] ; then + PROJECT="project" + fi + if [ "x$PROJECT" = "x" ] ; then + PROJECT="project" + fi +else + $ECHO "Using PROJECT environment variable override: $PROJECT" +fi +$ECHO "Preparing the $PROJECT build system...please wait" +$ECHO + + +######################## +# check for autoreconf # +######################## +HAVE_AUTORECONF=no +if [ "x$AUTORECONF" = "x" ] ; then + for AUTORECONF in autoreconf ; do + $VERBOSE_ECHO "Checking autoreconf version: $AUTORECONF --version" + $AUTORECONF --version > /dev/null 2>&1 + if [ $? = 0 ] ; then + HAVE_AUTORECONF=yes + break + fi + done +else + HAVE_AUTORECONF=yes + $ECHO "Using AUTORECONF environment variable override: $AUTORECONF" +fi + + +########################## +# autoconf version check # +########################## +_acfound=no +if [ "x$AUTOCONF" = "x" ] ; then + for AUTOCONF in autoconf ; do + $VERBOSE_ECHO "Checking autoconf version: $AUTOCONF --version" + $AUTOCONF --version > /dev/null 2>&1 + if [ $? = 0 ] ; then + _acfound=yes + break + fi + done +else + _acfound=yes + $ECHO "Using AUTOCONF environment variable override: $AUTOCONF" +fi + +_report_error=no +if [ ! "x$_acfound" = "xyes" ] ; then + $ECHO "ERROR: Unable to locate GNU Autoconf." + _report_error=yes +else + _version="`$AUTOCONF --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" + if [ "x$_version" = "x" ] ; then + _version="0.0.0" + fi + $ECHO "Found GNU Autoconf version $_version" + version_check "$AUTOCONF_VERSION" "$_version" + if [ $? -ne 0 ] ; then + _report_error=yes + fi +fi +if [ "x$_report_error" = "xyes" ] ; then + version_error "$AUTOCONF_VERSION" "GNU Autoconf" + exit 1 +fi + + +########################## +# automake version check # +########################## +_amfound=no +if [ "x$AUTOMAKE" = "x" ] ; then + for AUTOMAKE in automake ; do + $VERBOSE_ECHO "Checking automake version: $AUTOMAKE --version" + $AUTOMAKE --version > /dev/null 2>&1 + if [ $? = 0 ] ; then + _amfound=yes + break + fi + done +else + _amfound=yes + $ECHO "Using AUTOMAKE environment variable override: $AUTOMAKE" +fi + + +_report_error=no +if [ ! "x$_amfound" = "xyes" ] ; then + $ECHO + $ECHO "ERROR: Unable to locate GNU Automake." + _report_error=yes +else + _version="`$AUTOMAKE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" + if [ "x$_version" = "x" ] ; then + _version="0.0.0" + fi + $ECHO "Found GNU Automake version $_version" + version_check "$AUTOMAKE_VERSION" "$_version" + if [ $? -ne 0 ] ; then + _report_error=yes + fi +fi +if [ "x$_report_error" = "xyes" ] ; then + version_error "$AUTOMAKE_VERSION" "GNU Automake" + exit 1 +fi + + +######################## +# check for libtoolize # +######################## +HAVE_LIBTOOLIZE=yes +HAVE_ALT_LIBTOOLIZE=no +_ltfound=no +if [ "x$LIBTOOLIZE" = "x" ] ; then + LIBTOOLIZE=libtoolize + $VERBOSE_ECHO "Checking libtoolize version: $LIBTOOLIZE --version" + $LIBTOOLIZE --version > /dev/null 2>&1 + if [ ! $? = 0 ] ; then + HAVE_LIBTOOLIZE=no + $ECHO + if [ "x$HAVE_AUTORECONF" = "xno" ] ; then + $ECHO "Warning: libtoolize does not appear to be available." + else + $ECHO "Warning: libtoolize does not appear to be available. This means that" + $ECHO "the automatic build preparation via autoreconf will probably not work." + $ECHO "Preparing the build by running each step individually, however, should" + $ECHO "work and will be done automatically for you if autoreconf fails." + fi + + # look for some alternates + for tool in glibtoolize libtoolize15 libtoolize14 libtoolize13 ; do + $VERBOSE_ECHO "Checking libtoolize alternate: $tool --version" + _glibtoolize="`$tool --version > /dev/null 2>&1`" + if [ $? = 0 ] ; then + $VERBOSE_ECHO "Found $tool --version" + _glti="`which $tool`" + if [ "x$_glti" = "x" ] ; then + $VERBOSE_ECHO "Cannot find $tool with which" + continue; + fi + if test ! -f "$_glti" ; then + $VERBOSE_ECHO "Cannot use $tool, $_glti is not a file" + continue; + fi + _gltidir="`dirname $_glti`" + if [ "x$_gltidir" = "x" ] ; then + $VERBOSE_ECHO "Cannot find $tool path with dirname of $_glti" + continue; + fi + if test ! -d "$_gltidir" ; then + $VERBOSE_ECHO "Cannot use $tool, $_gltidir is not a directory" + continue; + fi + HAVE_ALT_LIBTOOLIZE=yes + LIBTOOLIZE="$tool" + $ECHO + $ECHO "Fortunately, $tool was found which means that your system may simply" + $ECHO "have a non-standard or incomplete GNU Autotools install. If you have" + $ECHO "sufficient system access, it may be possible to quell this warning by" + $ECHO "running:" + $ECHO + sudo -V > /dev/null 2>&1 + if [ $? = 0 ] ; then + $ECHO " sudo ln -s $_glti $_gltidir/libtoolize" + $ECHO + else + $ECHO " ln -s $_glti $_gltidir/libtoolize" + $ECHO + $ECHO "Run that as root or with proper permissions to the $_gltidir directory" + $ECHO + fi + _ltfound=yes + break + fi + done + else + _ltfound=yes + fi +else + _ltfound=yes + $ECHO "Using LIBTOOLIZE environment variable override: $LIBTOOLIZE" +fi + + +############################ +# libtoolize version check # +############################ +_report_error=no +if [ ! "x$_ltfound" = "xyes" ] ; then + $ECHO + $ECHO "ERROR: Unable to locate GNU Libtool." + _report_error=yes +else + _version="`$LIBTOOLIZE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`" + if [ "x$_version" = "x" ] ; then + _version="0.0.0" + fi + $ECHO "Found GNU Libtool version $_version" + version_check "$LIBTOOL_VERSION" "$_version" + if [ $? -ne 0 ] ; then + _report_error=yes + fi +fi +if [ "x$_report_error" = "xyes" ] ; then + version_error "$LIBTOOL_VERSION" "GNU Libtool" + exit 1 +fi + + +##################### +# check for aclocal # +##################### +if [ "x$ACLOCAL" = "x" ] ; then + for ACLOCAL in aclocal ; do + $VERBOSE_ECHO "Checking aclocal version: $ACLOCAL --version" + $ACLOCAL --version > /dev/null 2>&1 + if [ $? = 0 ] ; then + break + fi + done +else + $ECHO "Using ACLOCAL environment variable override: $ACLOCAL" +fi + + +######################## +# check for autoheader # +######################## +if [ "x$AUTOHEADER" = "x" ] ; then + for AUTOHEADER in autoheader ; do + $VERBOSE_ECHO "Checking autoheader version: $AUTOHEADER --version" + $AUTOHEADER --version > /dev/null 2>&1 + if [ $? = 0 ] ; then + break + fi + done +else + $ECHO "Using AUTOHEADER environment variable override: $AUTOHEADER" +fi + + +######################### +# check if version only # +######################### +$VERBOSE_ECHO "Checking whether to only output version information" +if [ "x$VERSION_ONLY" = "xyes" ] ; then + $ECHO + ident + $ECHO "---" + $ECHO "Version requested. No preparation or configuration will be performed." + exit 0 +fi + + +################################# +# PROTECT_FROM_CLOBBER FUNCTION # +################################# +protect_from_clobber ( ) { + PFC_INIT=1 + + # protect COPYING & INSTALL from overwrite by automake. the + # automake force option will (inappropriately) ignore the existing + # contents of a COPYING and/or INSTALL files (depending on the + # version) instead of just forcing *missing* files like it does + # for AUTHORS, NEWS, and README. this is broken but extremely + # prevalent behavior, so we protect against it by keeping a backup + # of the file that can later be restored. + + for file in COPYING INSTALL ; do + if test -f ${file} ; then + if test -f ${file}.$$.protect_from_automake.backup ; then + $VERBOSE_ECHO "Already backed up ${file} in `pwd`" + else + $VERBOSE_ECHO "Backing up ${file} in `pwd`" + $VERBOSE_ECHO "cp -p ${file} ${file}.$$.protect_from_automake.backup" + cp -p ${file} ${file}.$$.protect_from_automake.backup + fi + fi + done +} + + +############################## +# RECURSIVE_PROTECT FUNCTION # +############################## +recursive_protect ( ) { + + # for projects using recursive configure, run the build + # preparation steps for the subdirectories. this function assumes + # START_PATH was set to pwd before recursion begins so that + # relative paths work. + + # git 'r done, protect COPYING and INSTALL from being clobbered + protect_from_clobber + + if test -d autom4te.cache ; then + $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it" + $VERBOSE_ECHO "rm -rf autom4te.cache" + rm -rf autom4te.cache + fi + + # find configure template + _configure="`locate_configure_template`" + if [ "x$_configure" = "x" ] ; then + return + fi + # $VERBOSE_ECHO "Looking for configure template found `pwd`/$_configure" + + # look for subdirs + # $VERBOSE_ECHO "Looking for subdirs in `pwd`" + _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + CHECK_DIRS="" + for dir in $_det_config_subdirs ; do + if test -d "`pwd`/$dir" ; then + CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\"" + fi + done + + # process subdirs + if [ ! "x$CHECK_DIRS" = "x" ] ; then + $VERBOSE_ECHO "Recursively scanning the following directories:" + $VERBOSE_ECHO " $CHECK_DIRS" + for dir in $CHECK_DIRS ; do + $VERBOSE_ECHO "Protecting files from automake in $dir" + cd "$START_PATH" + eval "cd $dir" + + # recursively git 'r done + recursive_protect + done + fi +} # end of recursive_protect + + +############################# +# RESTORE_CLOBBERED FUNCION # +############################# +restore_clobbered ( ) { + + # The automake (and autoreconf by extension) -f/--force-missing + # option may overwrite COPYING and INSTALL even if they do exist. + # Here we restore the files if necessary. + + spacer=no + + for file in COPYING INSTALL ; do + if test -f ${file}.$$.protect_from_automake.backup ; then + if test -f ${file} ; then + # compare entire content, restore if needed + if test "x`cat ${file}`" != "x`cat ${file}.$$.protect_from_automake.backup`" ; then + if test "x$spacer" = "xno" ; then + $VERBOSE_ECHO + spacer=yes + fi + # restore the backup + $VERBOSE_ECHO "Restoring ${file} from backup (automake -f likely clobbered it)" + $VERBOSE_ECHO "rm -f ${file}" + rm -f ${file} + $VERBOSE_ECHO "mv ${file}.$$.protect_from_automake.backup ${file}" + mv ${file}.$$.protect_from_automake.backup ${file} + fi # check contents + elif test -f ${file}.$$.protect_from_automake.backup ; then + $VERBOSE_ECHO "mv ${file}.$$.protect_from_automake.backup ${file}" + mv ${file}.$$.protect_from_automake.backup ${file} + fi # -f ${file} + + # just in case + $VERBOSE_ECHO "rm -f ${file}.$$.protect_from_automake.backup" + rm -f ${file}.$$.protect_from_automake.backup + fi # -f ${file}.$$.protect_from_automake.backup + done + + CONFIGURE="`locate_configure_template`" + if [ "x$CONFIGURE" = "x" ] ; then + return + fi + + _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + if test ! -d "$_aux_dir" ; then + _aux_dir=. + fi + + for file in config.guess config.sub ltmain.sh ; do + if test -f "${_aux_dir}/${file}" ; then + $VERBOSE_ECHO "rm -f \"${_aux_dir}/${file}.backup\"" + rm -f "${_aux_dir}/${file}.backup" + fi + done +} # end of restore_clobbered + + +############################## +# RECURSIVE_RESTORE FUNCTION # +############################## +recursive_restore ( ) { + + # restore COPYING and INSTALL from backup if they were clobbered + # for each directory recursively. + + # git 'r undone + restore_clobbered + + # find configure template + _configure="`locate_configure_template`" + if [ "x$_configure" = "x" ] ; then + return + fi + + # look for subdirs + _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + CHECK_DIRS="" + for dir in $_det_config_subdirs ; do + if test -d "`pwd`/$dir" ; then + CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\"" + fi + done + + # process subdirs + if [ ! "x$CHECK_DIRS" = "x" ] ; then + $VERBOSE_ECHO "Recursively scanning the following directories:" + $VERBOSE_ECHO " $CHECK_DIRS" + for dir in $CHECK_DIRS ; do + $VERBOSE_ECHO "Checking files for automake damage in $dir" + cd "$START_PATH" + eval "cd $dir" + + # recursively git 'r undone + recursive_restore + done + fi +} # end of recursive_restore + + +####################### +# INITIALIZE FUNCTION # +####################### +initialize ( ) { + + # this routine performs a variety of directory-specific + # initializations. some are sanity checks, some are preventive, + # and some are necessary setup detection. + # + # this function sets: + # CONFIGURE + # SEARCH_DIRS + # CONFIG_SUBDIRS + + ################################## + # check for a configure template # + ################################## + CONFIGURE="`locate_configure_template`" + if [ "x$CONFIGURE" = "x" ] ; then + $ECHO + $ECHO "A configure.ac or configure.in file could not be located implying" + $ECHO "that the GNU Build System is at least not used in this directory. In" + $ECHO "any case, there is nothing to do here without one of those files." + $ECHO + $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`" + exit 1 + fi + + ##################### + # detect an aux dir # + ##################### + _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + if test ! -d "$_aux_dir" ; then + _aux_dir=. + else + $VERBOSE_ECHO "Detected auxillary directory: $_aux_dir" + fi + + ################################ + # detect a recursive configure # + ################################ + CONFIG_SUBDIRS="" + _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $CONFIGURE | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`" + for dir in $_det_config_subdirs ; do + if test -d "`pwd`/$dir" ; then + $VERBOSE_ECHO "Detected recursive configure directory: `pwd`/$dir" + CONFIG_SUBDIRS="$CONFIG_SUBDIRS `pwd`/$dir" + fi + done + + ########################################################### + # make sure certain required files exist for GNU projects # + ########################################################### + _marker_found="" + _marker_found_message_intro='Detected non-GNU marker "' + _marker_found_message_mid='" in ' + for marker in foreign cygnus ; do + _marker_found_message=${_marker_found_message_intro}${marker}${_marker_found_message_mid} + _marker_found="`grep 'AM_INIT_AUTOMAKE.*'${marker} $CONFIGURE`" + if [ ! "x$_marker_found" = "x" ] ; then + $VERBOSE_ECHO "${_marker_found_message}`basename \"$CONFIGURE\"`" + break + fi + if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then + _marker_found="`grep 'AUTOMAKE_OPTIONS.*'${marker} Makefile.am`" + if [ ! "x$_marker_found" = "x" ] ; then + $VERBOSE_ECHO "${_marker_found_message}Makefile.am" + break + fi + fi + done + if [ "x${_marker_found}" = "x" ] ; then + _suggest_foreign=no + for file in AUTHORS COPYING ChangeLog INSTALL NEWS README ; do + if [ ! -f $file ] ; then + $VERBOSE_ECHO "Touching ${file} since it does not exist" + _suggest_foreign=yes + touch $file + fi + done + + if [ "x${_suggest_foreign}" = "xyes" ] ; then + $ECHO + $ECHO "Warning: Several files expected of projects that conform to the GNU" + $ECHO "coding standards were not found. The files were automatically added" + $ECHO "for you since you do not have a 'foreign' declaration specified." + $ECHO + $ECHO "Considered adding 'foreign' to AM_INIT_AUTOMAKE in `basename \"$CONFIGURE\"`" + if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then + $ECHO "or to AUTOMAKE_OPTIONS in your top-level Makefile.am file." + fi + $ECHO + fi + fi + + ################################################## + # make sure certain generated files do not exist # + ################################################## + for file in config.guess config.sub ltmain.sh ; do + if test -f "${_aux_dir}/${file}" ; then + $VERBOSE_ECHO "mv -f \"${_aux_dir}/${file}\" \"${_aux_dir}/${file}.backup\"" + mv -f "${_aux_dir}/${file}" "${_aux_dir}/${file}.backup" + fi + done + + ############################ + # search alternate m4 dirs # + ############################ + SEARCH_DIRS="" + for dir in m4 ; do + if [ -d $dir ] ; then + $VERBOSE_ECHO "Found extra aclocal search directory: $dir" + SEARCH_DIRS="$SEARCH_DIRS -I $dir" + fi + done + + ###################################### + # remove any previous build products # + ###################################### + if test -d autom4te.cache ; then + $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it" + $VERBOSE_ECHO "rm -rf autom4te.cache" + rm -rf autom4te.cache + fi +# tcl/tk (and probably others) have a customized aclocal.m4, so can't delete it +# if test -f aclocal.m4 ; then +# $VERBOSE_ECHO "Found an aclocal.m4 file, deleting it" +# $VERBOSE_ECHO "rm -f aclocal.m4" +# rm -f aclocal.m4 +# fi + +} # end of initialize() + + +############## +# initialize # +############## + +# stash path +START_PATH="`pwd`" + +# Before running autoreconf or manual steps, some prep detection work +# is necessary or useful. Only needs to occur once per directory, but +# does need to traverse the entire subconfigure hierarchy to protect +# files from being clobbered even by autoreconf. +recursive_protect + +# start from where we started +cd "$START_PATH" + +# get ready to process +initialize + + +######################################### +# DOWNLOAD_GNULIB_CONFIG_GUESS FUNCTION # +######################################### + +# TODO - should make sure wget/curl exist and/or work before trying to +# use them. + +download_gnulib_config_guess () { + # abuse gitweb to download gnulib's latest config.guess via HTTP + config_guess_temp="config.guess.$$.download" + ret=1 + for __cmd in wget curl fetch ; do + $VERBOSE_ECHO "Checking for command ${__cmd}" + ${__cmd} --version > /dev/null 2>&1 + ret=$? + if [ ! $ret = 0 ] ; then + continue + fi + + __cmd_version=`${__cmd} --version | head -n 1 | sed -e 's/^[^0-9]\+//' -e 's/ .*//'` + $VERBOSE_ECHO "Found ${__cmd} ${__cmd_version}" + + opts="" + case ${__cmd} in + wget) + opts="-O" + ;; + curl) + opts="-o" + ;; + fetch) + opts="-t 5 -f" + ;; + esac + + $VERBOSE_ECHO "Running $__cmd \"${CONFIG_GUESS_URL}\" $opts \"${config_guess_temp}\"" + eval "$__cmd \"${CONFIG_GUESS_URL}\" $opts \"${config_guess_temp}\"" > /dev/null 2>&1 + if [ $? = 0 ] ; then + mv -f "${config_guess_temp}" ${_aux_dir}/config.guess + ret=0 + break + fi + done + + if [ ! $ret = 0 ] ; then + $ECHO "Warning: config.guess download failed from: $CONFIG_GUESS_URL" + rm -f "${config_guess_temp}" + fi +} + + +############################## +# LIBTOOLIZE_NEEDED FUNCTION # +############################## +libtoolize_needed () { + ret=1 # means no, don't need libtoolize + for feature in AC_PROG_LIBTOOL AM_PROG_LIBTOOL LT_INIT ; do + $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" + found="`grep \"^$feature.*\" $CONFIGURE`" + if [ ! "x$found" = "x" ] ; then + ret=0 # means yes, need to run libtoolize + break + fi + done + return ${ret} +} + + + +############################################ +# prepare build via autoreconf or manually # +############################################ +reconfigure_manually=no +if [ "x$HAVE_AUTORECONF" = "xyes" ] ; then + $ECHO + $ECHO $ECHO_N "Automatically preparing build ... $ECHO_C" + + $VERBOSE_ECHO "$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS" + autoreconf_output="`$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$autoreconf_output" + + if [ ! $ret = 0 ] ; then + if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then + if [ ! "x`echo \"$autoreconf_output\" | grep libtoolize | grep \"No such file or directory\"`" = "x" ] ; then + $ECHO + $ECHO "Warning: autoreconf failed but due to what is usually a common libtool" + $ECHO "misconfiguration issue. This problem is encountered on systems that" + $ECHO "have installed libtoolize under a different name without providing a" + $ECHO "symbolic link or without setting the LIBTOOLIZE environment variable." + $ECHO + $ECHO "Restarting the preparation steps with LIBTOOLIZE set to $LIBTOOLIZE" + + export LIBTOOLIZE + RUN_RECURSIVE=no + export RUN_RECURSIVE + untrap_abnormal + + $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" + sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" + exit $? + fi + fi + + $ECHO "Warning: $AUTORECONF failed" + + if test -f ltmain.sh ; then + $ECHO "libtoolize being run by autoreconf is not creating ltmain.sh in the auxillary directory like it should" + fi + + $ECHO "Attempting to run the preparation steps individually" + reconfigure_manually=yes + else + if [ "x$DOWNLOAD" = "xyes" ] ; then + if libtoolize_needed ; then + download_gnulib_config_guess + fi + fi + fi +else + reconfigure_manually=yes +fi + + +############################ +# LIBTOOL_FAILURE FUNCTION # +############################ +libtool_failure ( ) { + + # libtool is rather error-prone in comparison to the other + # autotools and this routine attempts to compensate for some + # common failures. the output after a libtoolize failure is + # parsed for an error related to AC_PROG_LIBTOOL and if found, we + # attempt to inject a project-provided libtool.m4 file. + + _autoconf_output="$1" + + if [ "x$RUN_RECURSIVE" = "xno" ] ; then + # we already tried the libtool.m4, don't try again + return 1 + fi + + if test -f "$LIBTOOL_M4" ; then + found_libtool="`$ECHO $_autoconf_output | grep AC_PROG_LIBTOOL`" + if test ! "x$found_libtool" = "x" ; then + if test -f acinclude.m4 ; then + rm -f acinclude.m4.$$.backup + $VERBOSE_ECHO "cat acinclude.m4 > acinclude.m4.$$.backup" + cat acinclude.m4 > acinclude.m4.$$.backup + fi + $VERBOSE_ECHO "cat \"$LIBTOOL_M4\" >> acinclude.m4" + chmod u+w acinclude.m4 + cat "$LIBTOOL_M4" >> acinclude.m4 + + # don't keep doing this + RUN_RECURSIVE=no + export RUN_RECURSIVE + untrap_abnormal + + $ECHO + $ECHO "Restarting the preparation steps with libtool macros in acinclude.m4" + $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" + sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9" + exit $? + fi + fi +} + + +########################### +# MANUAL_AUTOGEN FUNCTION # +########################### +manual_autogen ( ) { + + ################################################## + # Manual preparation steps taken are as follows: # + # aclocal [-I m4] # + # libtoolize --automake -c -f # + # aclocal [-I m4] # + # autoconf -f # + # autoheader # + # automake -a -c -f # + ################################################## + + ########### + # aclocal # + ########### + $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS" + aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$aclocal_output" + if [ ! $ret = 0 ] ; then $ECHO "ERROR: $ACLOCAL failed" && exit 2 ; fi + + ############## + # libtoolize # + ############## + if libtoolize_needed ; then + if [ "x$HAVE_LIBTOOLIZE" = "xyes" ] ; then + $VERBOSE_ECHO "$LIBTOOLIZE $LIBTOOLIZE_OPTIONS" + libtoolize_output="`$LIBTOOLIZE $LIBTOOLIZE_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$libtoolize_output" + + if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi + else + if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then + $VERBOSE_ECHO "$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS" + libtoolize_output="`$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$libtoolize_output" + + if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi + fi + fi + + ########### + # aclocal # + ########### + # re-run again as instructed by libtoolize + $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS" + aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$aclocal_output" + + # libtoolize might put ltmain.sh in the wrong place + if test -f ltmain.sh ; then + if test ! -f "${_aux_dir}/ltmain.sh" ; then + $ECHO + $ECHO "Warning: $LIBTOOLIZE is creating ltmain.sh in the wrong directory" + $ECHO + $ECHO "Fortunately, the problem can be worked around by simply copying the" + $ECHO "file to the appropriate location (${_aux_dir}/). This has been done for you." + $ECHO + $VERBOSE_ECHO "cp -p ltmain.sh \"${_aux_dir}/ltmain.sh\"" + cp -p ltmain.sh "${_aux_dir}/ltmain.sh" + $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C" + fi + fi # ltmain.sh + + if [ "x$DOWNLOAD" = "xyes" ] ; then + download_gnulib_config_guess + fi + fi # libtoolize_needed + + ############ + # autoconf # + ############ + $VERBOSE_ECHO + $VERBOSE_ECHO "$AUTOCONF $AUTOCONF_OPTIONS" + autoconf_output="`$AUTOCONF $AUTOCONF_OPTIONS 2>&1`" + ret=$? + $VERBOSE_ECHO "$autoconf_output" + + if [ ! $ret = 0 ] ; then + # retry without the -f and check for usage of macros that are too new + ac2_59_macros="AC_C_RESTRICT AC_INCLUDES_DEFAULT AC_LANG_ASSERT AC_LANG_WERROR AS_SET_CATFILE" + ac2_55_macros="AC_COMPILER_IFELSE AC_FUNC_MBRTOWC AC_HEADER_STDBOOL AC_LANG_CONFTEST AC_LANG_SOURCE AC_LANG_PROGRAM AC_LANG_CALL AC_LANG_FUNC_TRY_LINK AC_MSG_FAILURE AC_PREPROC_IFELSE" + ac2_54_macros="AC_C_BACKSLASH_A AC_CONFIG_LIBOBJ_DIR AC_GNU_SOURCE AC_PROG_EGREP AC_PROG_FGREP AC_REPLACE_FNMATCH AC_FUNC_FNMATCH_GNU AC_FUNC_REALLOC AC_TYPE_MBSTATE_T" + + macros_to_search="" + ac_major="`echo ${AUTOCONF_VERSION}. | cut -d. -f1 | sed 's/[^0-9]//g'`" + ac_minor="`echo ${AUTOCONF_VERSION}. | cut -d. -f2 | sed 's/[^0-9]//g'`" + + if [ $ac_major -lt 2 ] ; then + macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros" + else + if [ $ac_minor -lt 54 ] ; then + macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros" + elif [ $ac_minor -lt 55 ] ; then + macros_to_search="$ac2_59_macros $ac2_55_macros" + elif [ $ac_minor -lt 59 ] ; then + macros_to_search="$ac2_59_macros" + fi + fi + + configure_ac_macros=__none__ + for feature in $macros_to_search ; do + $VERBOSE_ECHO "Searching for $feature in $CONFIGURE" + found="`grep \"^$feature.*\" $CONFIGURE`" + if [ ! "x$found" = "x" ] ; then + if [ "x$configure_ac_macros" = "x__none__" ] ; then + configure_ac_macros="$feature" + else + configure_ac_macros="$feature $configure_ac_macros" + fi + fi + done + if [ ! "x$configure_ac_macros" = "x__none__" ] ; then + $ECHO + $ECHO "Warning: Unsupported macros were found in $CONFIGURE" + $ECHO + $ECHO "The `basename \"$CONFIGURE\"` file was scanned in order to determine if any" + $ECHO "unsupported macros are used that exceed the minimum version" + $ECHO "settings specified within this file. As such, the following macros" + $ECHO "should be removed from configure.ac or the version numbers in this" + $ECHO "file should be increased:" + $ECHO + $ECHO "$configure_ac_macros" + $ECHO + $ECHO $ECHO_N "Ignorantly continuing build preparation ... $ECHO_C" + fi + + ################### + # autoconf, retry # + ################### + $VERBOSE_ECHO + $VERBOSE_ECHO "$AUTOCONF" + autoconf_output="`$AUTOCONF 2>&1`" + ret=$? + $VERBOSE_ECHO "$autoconf_output" + + if [ ! $ret = 0 ] ; then + # test if libtool is busted + libtool_failure "$autoconf_output" + + # let the user know what went wrong + cat <