From: Gustavo Zacarias Date: Fri, 7 Mar 2014 10:08:36 +0000 (-0300) Subject: configs/qemu: fix and bump relevant kernel/header versions X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=e7124e36770f46ad370b131b264d9527d92b6329;p=buildroot.git configs/qemu: fix and bump relevant kernel/header versions Tweak the configs to deal with b155f5a5ab321b06df1c5d5f5e104438e8288cf8 fallout. And bump to the latest kernel versions. As of this commit the microblaze qemu targets seem broken, probably because of commit 14e527eb66d251c878f212236729d715e350c135 or some qemu limitation. SPARC seems to have issues as well, the kernel seems to go down with an unhandled exception with qemu 1.7.0 Signed-off-by: Gustavo Zacarias Signed-off-by: Thomas Petazzoni --- diff --git a/board/qemu/arm-nuri/readme.txt b/board/qemu/arm-nuri/readme.txt index 6fdba81dc2..0cf8d0bca4 100644 --- a/board/qemu/arm-nuri/readme.txt +++ b/board/qemu/arm-nuri/readme.txt @@ -7,4 +7,4 @@ graphical window is the framebuffer. Startup time is slow because of the SMP CPU emulation so be patient. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/arm-versatile/linux-3.11.config b/board/qemu/arm-versatile/linux-3.11.config deleted file mode 100644 index da73575b5c..0000000000 --- a/board/qemu/arm-versatile/linux-3.11.config +++ /dev/null @@ -1,89 +0,0 @@ -CONFIG_ARCH_VERSATILE=y -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MACH_VERSATILE_AB=y -CONFIG_PCI=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=1f03 mem=32M" -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_EEPROM_LEGACY=m -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_SMC91X=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_AMBAKMI=y -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_ACORN_8x8=y -CONFIG_SOUND=y -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_ARMAACI=m -CONFIG_MMC=y -CONFIG_MMC_ARMMMCI=m -CONFIG_EXT2_FS=y -CONFIG_VFAT_FS=m -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_ROMFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_ISO8859_1=m -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/board/qemu/arm-versatile/linux-3.13.config b/board/qemu/arm-versatile/linux-3.13.config new file mode 100644 index 0000000000..38c6466566 --- /dev/null +++ b/board/qemu/arm-versatile/linux-3.13.config @@ -0,0 +1,79 @@ +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_VERSATILE=y +CONFIG_MACH_VERSATILE_AB=y +CONFIG_PCI=y +CONFIG_AEABI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=1f03 mem=32M" +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_PHYSMAP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_EEPROM_LEGACY=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_NETDEVICES=y +CONFIG_SMC91X=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=m +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_ARMAACI=m +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=m +CONFIG_EXT2_FS=y +CONFIG_VFAT_FS=m +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_MINIX_FS=y +CONFIG_ROMFS_FS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_ISO8859_1=m +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_FONTS=y +CONFIG_FONT_ACORN_8x8=y diff --git a/board/qemu/arm-versatile/readme.txt b/board/qemu/arm-versatile/readme.txt index 7d0745f38b..2c02e26cf9 100644 --- a/board/qemu/arm-versatile/readme.txt +++ b/board/qemu/arm-versatile/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/arm-vexpress/readme.txt b/board/qemu/arm-vexpress/readme.txt index 9a4694d68a..50dd563bc1 100644 --- a/board/qemu/arm-vexpress/readme.txt +++ b/board/qemu/arm-vexpress/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/microblazebe-mmu/linux-3.12.config b/board/qemu/microblazebe-mmu/linux-3.12.config deleted file mode 100644 index 7083cf568e..0000000000 --- a/board/qemu/microblazebe-mmu/linux-3.12.config +++ /dev/null @@ -1,68 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="rootfs.cpio" -CONFIG_INITRAMFS_COMPRESSION_GZIP=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_HOTPLUG is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_SHMEM is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_OPT_LIB_ASM=y -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_HZ_100=y -CONFIG_MMU=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE_FORCE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_XILINX_EMACLITE=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_CIFS=y -CONFIG_CIFS_STATS=y -CONFIG_CIFS_STATS2=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEBUG_SLAB=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/board/qemu/microblazebe-mmu/linux-3.13.config b/board/qemu/microblazebe-mmu/linux-3.13.config new file mode 100644 index 0000000000..c2ef7893eb --- /dev/null +++ b/board/qemu/microblazebe-mmu/linux-3.13.config @@ -0,0 +1,59 @@ +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="rootfs.cpio" +CONFIG_INITRAMFS_COMPRESSION_GZIP=y +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_SHMEM is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_OPT_LIB_ASM=y +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_HZ_100=y +CONFIG_MMU=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE_FORCE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_NETDEVICES=y +CONFIG_XILINX_EMACLITE=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +CONFIG_NFS_FS=y +CONFIG_CIFS=y +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_SLAB=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_EARLY_PRINTK=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/board/qemu/microblazebe-mmu/readme.txt b/board/qemu/microblazebe-mmu/readme.txt index 8ade434017..3c7e10c5c2 100644 --- a/board/qemu/microblazebe-mmu/readme.txt +++ b/board/qemu/microblazebe-mmu/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/microblazeel-mmu/linux-3.12.config b/board/qemu/microblazeel-mmu/linux-3.12.config deleted file mode 100644 index cdeb3242df..0000000000 --- a/board/qemu/microblazeel-mmu/linux-3.12.config +++ /dev/null @@ -1,67 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="rootfs.cpio" -CONFIG_INITRAMFS_COMPRESSION_GZIP=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_HOTPLUG is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_SHMEM is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_HZ_100=y -CONFIG_MMU=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE_FORCE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_XILINX_EMACLITE=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_CIFS=y -CONFIG_CIFS_STATS=y -CONFIG_CIFS_STATS2=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEBUG_SLAB=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/board/qemu/microblazeel-mmu/linux-3.13.config b/board/qemu/microblazeel-mmu/linux-3.13.config new file mode 100644 index 0000000000..7426f1f0a0 --- /dev/null +++ b/board/qemu/microblazeel-mmu/linux-3.13.config @@ -0,0 +1,58 @@ +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="rootfs.cpio" +CONFIG_INITRAMFS_COMPRESSION_GZIP=y +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_SHMEM is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_HZ_100=y +CONFIG_MMU=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE_FORCE=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_NETDEVICES=y +CONFIG_XILINX_EMACLITE=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +CONFIG_NFS_FS=y +CONFIG_CIFS=y +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_SLAB=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_EARLY_PRINTK=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/board/qemu/microblazeel-mmu/readme.txt b/board/qemu/microblazeel-mmu/readme.txt index 9ac55dbca6..d402d137aa 100644 --- a/board/qemu/microblazeel-mmu/readme.txt +++ b/board/qemu/microblazeel-mmu/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/mips-malta/linux-3.12.config b/board/qemu/mips-malta/linux-3.12.config deleted file mode 100644 index 7549ccc3c8..0000000000 --- a/board/qemu/mips-malta/linux-3.12.config +++ /dev/null @@ -1,76 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_PID_NS=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PCI=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_I8042 is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_QUOTA=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/board/qemu/mips-malta/linux-3.13.config b/board/qemu/mips-malta/linux-3.13.config new file mode 100644 index 0000000000..df0fd1c457 --- /dev/null +++ b/board/qemu/mips-malta/linux-3.13.config @@ -0,0 +1,60 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_HZ_100=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_NAMESPACES=y +CONFIG_RELAY=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_I8042 is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_QUOTA=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y diff --git a/board/qemu/mips-malta/readme.txt b/board/qemu/mips-malta/readme.txt index b3679270c0..719a624e6e 100644 --- a/board/qemu/mips-malta/readme.txt +++ b/board/qemu/mips-malta/readme.txt @@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/mips64-malta/linux-3.12.config b/board/qemu/mips64-malta/linux-3.12.config deleted file mode 100644 index c112793d66..0000000000 --- a/board/qemu/mips64-malta/linux-3.12.config +++ /dev/null @@ -1,59 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_HZ_100=y -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_NAMESPACES=y -CONFIG_RELAY=y -CONFIG_EMBEDDED=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -# CONFIG_WLAN is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT4_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y diff --git a/board/qemu/mips64-malta/linux-3.13.config b/board/qemu/mips64-malta/linux-3.13.config new file mode 100644 index 0000000000..c112793d66 --- /dev/null +++ b/board/qemu/mips64-malta/linux-3.13.config @@ -0,0 +1,59 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R1=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_HZ_100=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_NAMESPACES=y +CONFIG_RELAY=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +# CONFIG_WLAN is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT4_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y diff --git a/board/qemu/mips64-malta/readme.txt b/board/qemu/mips64-malta/readme.txt index 7999b78130..3ce3c626d5 100644 --- a/board/qemu/mips64-malta/readme.txt +++ b/board/qemu/mips64-malta/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/mips64el-malta/linux-3.12.config b/board/qemu/mips64el-malta/linux-3.12.config deleted file mode 100644 index e980476408..0000000000 --- a/board/qemu/mips64el-malta/linux-3.12.config +++ /dev/null @@ -1,60 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_HZ_100=y -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_NAMESPACES=y -CONFIG_RELAY=y -CONFIG_EMBEDDED=y -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -# CONFIG_WLAN is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT4_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y diff --git a/board/qemu/mips64el-malta/linux-3.13.config b/board/qemu/mips64el-malta/linux-3.13.config new file mode 100644 index 0000000000..e980476408 --- /dev/null +++ b/board/qemu/mips64el-malta/linux-3.13.config @@ -0,0 +1,60 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS64_R1=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_HZ_100=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_NAMESPACES=y +CONFIG_RELAY=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +# CONFIG_WLAN is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT4_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y diff --git a/board/qemu/mips64el-malta/readme.txt b/board/qemu/mips64el-malta/readme.txt index dba33d324b..48bae3717f 100644 --- a/board/qemu/mips64el-malta/readme.txt +++ b/board/qemu/mips64el-malta/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/mipsel-malta/linux-3.12.config b/board/qemu/mipsel-malta/linux-3.12.config deleted file mode 100644 index b51de4b8da..0000000000 --- a/board/qemu/mipsel-malta/linux-3.12.config +++ /dev/null @@ -1,77 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_PID_NS=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PCI=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_I8042 is not set -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_QUOTA=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/board/qemu/mipsel-malta/linux-3.13.config b/board/qemu/mipsel-malta/linux-3.13.config new file mode 100644 index 0000000000..23c76ecae7 --- /dev/null +++ b/board/qemu/mipsel-malta/linux-3.13.config @@ -0,0 +1,61 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_HZ_100=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_NAMESPACES=y +CONFIG_RELAY=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_I8042 is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_QUOTA=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y diff --git a/board/qemu/mipsel-malta/readme.txt b/board/qemu/mipsel-malta/readme.txt index b77cc84e20..dd290c4559 100644 --- a/board/qemu/mipsel-malta/readme.txt +++ b/board/qemu/mipsel-malta/readme.txt @@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. No keyboard support has been enabled. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/powerpc-g3beige/linux-3.12.config b/board/qemu/powerpc-g3beige/linux-3.12.config deleted file mode 100644 index 098dae30ac..0000000000 --- a/board/qemu/powerpc-g3beige/linux-3.12.config +++ /dev/null @@ -1,86 +0,0 @@ -CONFIG_ALTIVEC=y -CONFIG_EXPERIMENTAL=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_COMPAT_BRK=y -CONFIG_SLAB=y -CONFIG_LBDAF=y -CONFIG_PPC_PMAC=y -CONFIG_PPC_OF_BOOT_TRAMPOLINE=y -CONFIG_PPC601_SYNC_FIX=y -CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_BINFMT_ELF=y -CONFIG_PROC_DEVICETREE=y -CONFIG_PM=y -CONFIG_SECCOMP=y -CONFIG_PCCARD=y -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y -CONFIG_YENTA=y -CONFIG_ADVANCED_OPTIONS=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_INET_LRO=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_IDE=y -CONFIG_IDE_GD=y -CONFIG_IDE_GD_ATA=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_PROC_FS=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_IEEE1394=y -CONFIG_IEEE1394_OHCI1394=y -CONFIG_IEEE1394_ETH1394=y -CONFIG_IEEE1394_RAWIO=y -CONFIG_IEEE1394_VIDEO1394=y -CONFIG_IEEE1394_DV1394=y -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_ADB=y -CONFIG_ADB_CUDA=y -CONFIG_ADB_PMU=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MACE=y -CONFIG_BMAC=y -CONFIG_HAPPYMEAL=y -CONFIG_SUNGEM=y -CONFIG_CASSINI=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -CONFIG_NE2K_PCI=y -CONFIG_8139CP=y -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -CONFIG_SERIO=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_TTYS=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_SSB=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCMCIAHOST=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_MISC_FILESYSTEMS=y -CONFIG_SQUASHFS=y -CONFIG_LIBCRC32C=y -CONFIG_BOOTX_TEXT=y -CONFIG_CRYPTO_HW=y diff --git a/board/qemu/powerpc-g3beige/linux-3.13.config b/board/qemu/powerpc-g3beige/linux-3.13.config new file mode 100644 index 0000000000..a8dd1f6a48 --- /dev/null +++ b/board/qemu/powerpc-g3beige/linux-3.13.config @@ -0,0 +1,47 @@ +CONFIG_ALTIVEC=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SLAB=y +CONFIG_PPC601_SYNC_FIX=y +CONFIG_HIGHMEM=y +CONFIG_PCCARD=y +CONFIG_YENTA=y +CONFIG_ADVANCED_OPTIONS=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_CONNECTOR=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_CMD64X=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_ADB=y +CONFIG_ADB_CUDA=y +CONFIG_ADB_PMU=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_MACE=y +CONFIG_BMAC=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +CONFIG_8139TOO=y +CONFIG_HAPPYMEAL=y +CONFIG_SUNGEM=y +CONFIG_CASSINI=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_SSB=y +CONFIG_SSB_PCMCIAHOST=y +CONFIG_SSB_DRIVER_PCICORE=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_SQUASHFS=y +CONFIG_LIBCRC32C=y +CONFIG_BOOTX_TEXT=y diff --git a/board/qemu/powerpc-g3beige/readme.txt b/board/qemu/powerpc-g3beige/readme.txt index 07cb6604a8..271135007d 100644 --- a/board/qemu/powerpc-g3beige/readme.txt +++ b/board/qemu/powerpc-g3beige/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/powerpc-mpc8544ds/readme.txt b/board/qemu/powerpc-mpc8544ds/readme.txt index cd56ddde3c..27b3beea42 100644 --- a/board/qemu/powerpc-mpc8544ds/readme.txt +++ b/board/qemu/powerpc-mpc8544ds/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/powerpc-virtex-ml507/readme.txt b/board/qemu/powerpc-virtex-ml507/readme.txt index a9a63788aa..0547987c29 100644 --- a/board/qemu/powerpc-virtex-ml507/readme.txt +++ b/board/qemu/powerpc-virtex-ml507/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/sh4-r2d/linux-3.2.config b/board/qemu/sh4-r2d/linux-3.2.config index 287f36a65c..5fc878c761 100644 --- a/board/qemu/sh4-r2d/linux-3.2.config +++ b/board/qemu/sh4-r2d/linux-3.2.config @@ -3,9 +3,6 @@ CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL_SYSCALL is not set CONFIG_SLAB=y CONFIG_PROFILING=y CONFIG_OPROFILE=y @@ -34,11 +31,7 @@ CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_PATA_PLATFORM=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y CONFIG_8139CP=y -CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set # CONFIG_WLAN is not set CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set @@ -66,7 +59,6 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_SOUND=y -CONFIG_SND=m CONFIG_SND_YMFPCI=m CONFIG_SOUND_PRIME=m CONFIG_HID_A4TECH=y @@ -100,6 +92,5 @@ CONFIG_TMPFS=y CONFIG_MINIX_FS=y CONFIG_NLS_CODEPAGE_932=y CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_T10DIF=y diff --git a/board/qemu/sh4-r2d/readme.txt b/board/qemu/sh4-r2d/readme.txt index 2a963ebf03..73dce143cd 100644 --- a/board/qemu/sh4-r2d/readme.txt +++ b/board/qemu/sh4-r2d/readme.txt @@ -5,4 +5,4 @@ Run the emulation with: The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/sparc-ss10/readme.txt b/board/qemu/sparc-ss10/readme.txt index 725ab30f27..a126a55086 100644 --- a/board/qemu/sparc-ss10/readme.txt +++ b/board/qemu/sparc-ss10/readme.txt @@ -1,6 +1,6 @@ Run the emulation with: - qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2 -append "root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user + qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2 -append "root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user -display none The login prompt will appear in the terminal that started Qemu. The graphical window is the framebuffer. diff --git a/board/qemu/x86/linux-3.12.config b/board/qemu/x86/linux-3.12.config deleted file mode 100644 index 5bf6944e3d..0000000000 --- a/board/qemu/x86/linux-3.12.config +++ /dev/null @@ -1,67 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_X86_EXTENDED_PLATFORM is not set -# CONFIG_SCHED_OMIT_FRAME_POINTER is not set -# CONFIG_MTRR_SANITIZER is not set -# CONFIG_SECCOMP is not set -# CONFIG_RELOCATABLE is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FIRMWARE_IN_KERNEL is not set -# CONFIG_BLK_DEV is not set -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_ATA_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_NE2K_PCI=y -CONFIG_8139CP=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_HDA_INTEL=y -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_X86_PLATFORM_DEVICES is not set -# CONFIG_DMIID is not set -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_X86_VERBOSE_BOOTUP is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/board/qemu/x86/linux-3.13.config b/board/qemu/x86/linux-3.13.config new file mode 100644 index 0000000000..ad9517c19b --- /dev/null +++ b/board/qemu/x86/linux-3.13.config @@ -0,0 +1,60 @@ +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_X86_EXTENDED_PLATFORM is not set +# CONFIG_SCHED_OMIT_FRAME_POINTER is not set +# CONFIG_MTRR_SANITIZER is not set +# CONFIG_SECCOMP is not set +# CONFIG_RELOCATABLE is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_BLK_DEV is not set +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_INTEL=y +# CONFIG_USB_SUPPORT is not set +# CONFIG_X86_PLATFORM_DEVICES is not set +# CONFIG_DMIID is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_X86_VERBOSE_BOOTUP is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/board/qemu/x86/readme.txt b/board/qemu/x86/readme.txt index c07000c039..c821255a22 100644 --- a/board/qemu/x86/readme.txt +++ b/board/qemu/x86/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the graphical window. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/board/qemu/x86_64/linux-3.12.config b/board/qemu/x86_64/linux-3.12.config deleted file mode 100644 index 5bf6944e3d..0000000000 --- a/board/qemu/x86_64/linux-3.12.config +++ /dev/null @@ -1,67 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_X86_EXTENDED_PLATFORM is not set -# CONFIG_SCHED_OMIT_FRAME_POINTER is not set -# CONFIG_MTRR_SANITIZER is not set -# CONFIG_SECCOMP is not set -# CONFIG_RELOCATABLE is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FIRMWARE_IN_KERNEL is not set -# CONFIG_BLK_DEV is not set -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_ATA_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_NE2K_PCI=y -CONFIG_8139CP=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_MFD_SUPPORT is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_HDA_INTEL=y -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_X86_PLATFORM_DEVICES is not set -# CONFIG_DMIID is not set -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_FRAME_POINTER is not set -# CONFIG_X86_VERBOSE_BOOTUP is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/board/qemu/x86_64/linux-3.13.config b/board/qemu/x86_64/linux-3.13.config new file mode 100644 index 0000000000..ad9517c19b --- /dev/null +++ b/board/qemu/x86_64/linux-3.13.config @@ -0,0 +1,60 @@ +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_X86_EXTENDED_PLATFORM is not set +# CONFIG_SCHED_OMIT_FRAME_POINTER is not set +# CONFIG_MTRR_SANITIZER is not set +# CONFIG_SECCOMP is not set +# CONFIG_RELOCATABLE is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_BLK_DEV is not set +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_INTEL=y +# CONFIG_USB_SUPPORT is not set +# CONFIG_X86_PLATFORM_DEVICES is not set +# CONFIG_DMIID is not set +CONFIG_EXT2_FS=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_X86_VERBOSE_BOOTUP is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/board/qemu/x86_64/readme.txt b/board/qemu/x86_64/readme.txt index 3c344f95a8..f350d36b43 100644 --- a/board/qemu/x86_64/readme.txt +++ b/board/qemu/x86_64/readme.txt @@ -4,4 +4,4 @@ Run the emulation with: The login prompt will appear in the graphical window. -Tested with QEMU 1.6.1 +Tested with QEMU 1.7.0 diff --git a/configs/qemu_arm_nuri_defconfig b/configs/qemu_arm_nuri_defconfig index bddec64b41..40dcb37728 100644 --- a/configs/qemu_arm_nuri_defconfig +++ b/configs/qemu_arm_nuri_defconfig @@ -14,12 +14,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySAC1" BR2_TARGET_ROOTFS_INITRAMFS=y # Lock to 3.10 headers to avoid breaking with newer kernels +# Stuck at 3.10.x because there's no Nuri DTS BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.10.24" +BR2_DEFAULT_KERNEL_VERSION="3.10.32" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.24" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.32" BR2_LINUX_KERNEL_DEFCONFIG="exynos4" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig index a26054d816..1348bab8fc 100644 --- a/configs/qemu_arm_versatile_defconfig +++ b/configs/qemu_arm_versatile_defconfig @@ -10,14 +10,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.11 headers to avoid breaking with newer kernels +# Lock to 3.13 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.11.10" +BR2_DEFAULT_KERNEL_VERSION="3.13.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.11.10" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.11.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-3.13.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig index 6f163c8894..e35a44a54c 100644 --- a/configs/qemu_arm_vexpress_defconfig +++ b/configs/qemu_arm_vexpress_defconfig @@ -13,13 +13,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.12 headers to avoid breaking with newer kernels +# Lock to 3.13 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.12.5" +BR2_DEFAULT_KERNEL_VERSION="3.13.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_DEFCONFIG="vexpress" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig index d5f780b80c..f74a3a1bab 100644 --- a/configs/qemu_microblazebe_mmu_defconfig +++ b/configs/qemu_microblazebe_mmu_defconfig @@ -12,9 +12,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.12.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-3.13.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazebe-mmu/system.dts" diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig index 54d5834747..3a66d1b3a9 100644 --- a/configs/qemu_microblazeel_mmu_defconfig +++ b/configs/qemu_microblazeel_mmu_defconfig @@ -12,9 +12,9 @@ BR2_TARGET_ROOTFS_INITRAMFS=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.12.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-3.13.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_USE_CUSTOM_DTS=y BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/qemu/microblazeel-mmu/system.dts" diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig index 19423c2889..97937d18e1 100644 --- a/configs/qemu_mips64_malta_defconfig +++ b/configs/qemu_mips64_malta_defconfig @@ -6,16 +6,17 @@ BR2_MIPS_NABI64=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.12 headers to avoid breaking with newer kernels +# Lock to 3.13 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.12.5" +BR2_DEFAULT_KERNEL_VERSION="3.13.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.12.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-3.13.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig index 2f7405f7fa..4adf2049da 100644 --- a/configs/qemu_mips64el_malta_defconfig +++ b/configs/qemu_mips64el_malta_defconfig @@ -9,16 +9,17 @@ BR2_TOOLCHAIN_BUILDROOT_EGLIBC=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.12 headers to avoid breaking with newer kernels +# Lock to 3.13 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.12.5" +BR2_DEFAULT_KERNEL_VERSION="3.13.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-3.12.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-3.13.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips_malta_defconfig b/configs/qemu_mips_malta_defconfig index dc28087e1a..3c1532c216 100644 --- a/configs/qemu_mips_malta_defconfig +++ b/configs/qemu_mips_malta_defconfig @@ -6,16 +6,17 @@ BR2_mips_32r2=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.12 headers to avoid breaking with newer kernels +# Lock to 3.13 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.12.5" +BR2_DEFAULT_KERNEL_VERSION="3.13.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.12.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips-malta/linux-3.13.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mipsel_malta_defconfig b/configs/qemu_mipsel_malta_defconfig index 6a73e4c440..b673f0bd30 100644 --- a/configs/qemu_mipsel_malta_defconfig +++ b/configs/qemu_mipsel_malta_defconfig @@ -6,16 +6,17 @@ BR2_mips_32r2=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.12 headers to avoid breaking with newer kernels +# Lock to 3.13 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.12.5" +BR2_DEFAULT_KERNEL_VERSION="3.13.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.12.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mipsel-malta/linux-3.13.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig index f6603a0751..1668e72ce5 100644 --- a/configs/qemu_ppc_g3beige_defconfig +++ b/configs/qemu_ppc_g3beige_defconfig @@ -6,16 +6,17 @@ BR2_powerpc_750=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.12 headers to avoid breaking with newer kernels +# Lock to 3.13 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.12.5" +BR2_DEFAULT_KERNEL_VERSION="3.13.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.12.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/powerpc-g3beige/linux-3.13.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig index cc90657a98..6d7f24d83a 100644 --- a/configs/qemu_ppc_mpc8544ds_defconfig +++ b/configs/qemu_ppc_mpc8544ds_defconfig @@ -6,14 +6,15 @@ BR2_powerpc_8548=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 3.12 headers to avoid breaking with newer kernels +# Lock to 3.13 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.12.5" +BR2_DEFAULT_KERNEL_VERSION="3.13.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_DEFCONFIG="mpc85xx" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_ppc_virtex_ml507_defconfig b/configs/qemu_ppc_virtex_ml507_defconfig index 99f8967e44..cd2f647228 100644 --- a/configs/qemu_ppc_virtex_ml507_defconfig +++ b/configs/qemu_ppc_virtex_ml507_defconfig @@ -6,9 +6,10 @@ BR2_powerpc_440=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Lock to 3.12 headers to avoid breaking with newer kernels +# Lock to 3.13 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.12.5" +BR2_DEFAULT_KERNEL_VERSION="3.13.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y # Use soft float BR2_SOFT_FLOAT=y @@ -16,7 +17,7 @@ BR2_SOFT_FLOAT=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_DEFCONFIG="44x/virtex5" BR2_LINUX_KERNEL_VMLINUX=y BR2_LINUX_KERNEL_DTS_SUPPORT=y diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig index bcd50dd8c4..b27d9ec600 100644 --- a/configs/qemu_sh4_r2d_defconfig +++ b/configs/qemu_sh4_r2d_defconfig @@ -12,7 +12,8 @@ BR2_TARGET_ROOTFS_EXT2=y # Lock to 3.2 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.2.53" +BR2_DEFAULT_KERNEL_VERSION="3.2.55" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_2=y # The kernel wants to use the -m4-nofpu option to make sure that it # doesn't use floating point operations. @@ -21,7 +22,7 @@ BR2_EXTRA_GCC_CONFIG_OPTIONS="--with-multilib-list=m4,m4-nofpu" # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.53" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.2.55" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-3.2.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig index 95803e7c94..3b56d9807d 100644 --- a/configs/qemu_sparc_ss10_defconfig +++ b/configs/qemu_sparc_ss10_defconfig @@ -9,6 +9,7 @@ BR2_TARGET_ROOTFS_EXT2=y # Lock to 3.12 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y BR2_DEFAULT_KERNEL_VERSION="3.12.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_12=y # Linux kernel BR2_LINUX_KERNEL=y diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig index 67fc68563e..827d3625cd 100644 --- a/configs/qemu_x86_64_defconfig +++ b/configs/qemu_x86_64_defconfig @@ -9,13 +9,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.12 headers to avoid breaking with newer kernels +# Lock to 3.13 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.12.5" +BR2_DEFAULT_KERNEL_VERSION="3.13.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.12.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-3.13.config" diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig index 9b45ce862f..a5040c8952 100644 --- a/configs/qemu_x86_defconfig +++ b/configs/qemu_x86_defconfig @@ -10,13 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Lock to 3.12 headers to avoid breaking with newer kernels +# Lock to 3.13 headers to avoid breaking with newer kernels BR2_KERNEL_HEADERS_VERSION=y -BR2_DEFAULT_KERNEL_VERSION="3.12.5" +BR2_DEFAULT_KERNEL_VERSION="3.13.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.13.5" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.12.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-3.13.config"