From: Anuj Phogat Date: Mon, 7 Oct 2013 19:45:44 +0000 (-0700) Subject: i965/gen7: Enable the features required for GL_ARB_sample_shading X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=e7393260befe6bcb9d0905da67bc9253c25c345b;p=mesa.git i965/gen7: Enable the features required for GL_ARB_sample_shading - Enable GEN7_WM_MSDISPMODE_PERSAMPLE, GEN7_WM_POSOFFSET_SAMPLE, GEN7_WM_OMASK_TO_RENDER_TARGET as per extension's specification. - Only enable one of GEN7_WM_8_DISPATCH_ENABLE or GEN7_WM_16_DISPATCH_ENABLE when GEN7_WM_MSDISPMODE_PERSAMPLE is enabled. Refer IVB PRM Vol. 2, Part 1, Page 288 for details. V2: - Use shared function _mesa_get_min_invocations_per_fragment(). - Use brw_wm_prog_data variables: uses_pos_offset, uses_omask. V3: - Enable simd16 dispatch with per sample shading. - Make changes to give preference to 'simd16 only' mode over 'simd8 only' mode in case of non 1x per sample shading. Signed-off-by: Anuj Phogat Reviewed-by: Paul Berry --- diff --git a/src/mesa/drivers/dri/i965/gen7_wm_state.c b/src/mesa/drivers/dri/i965/gen7_wm_state.c index a2046c36546..58a6438e79e 100644 --- a/src/mesa/drivers/dri/i965/gen7_wm_state.c +++ b/src/mesa/drivers/dri/i965/gen7_wm_state.c @@ -27,6 +27,7 @@ #include "brw_defines.h" #include "brw_util.h" #include "brw_wm.h" +#include "program/program.h" #include "program/prog_parameter.h" #include "program/prog_statevars.h" #include "intel_batchbuffer.h" @@ -82,9 +83,13 @@ upload_wm_state(struct brw_context *brw) GEN7_WM_BARYCENTRIC_INTERPOLATION_MODE_SHIFT; /* _NEW_COLOR, _NEW_MULTISAMPLE */ + /* Enable if the pixel shader kernel generates and outputs oMask. + */ if (fp->program.UsesKill || ctx->Color.AlphaEnabled || - ctx->Multisample.SampleAlphaToCoverage) + ctx->Multisample.SampleAlphaToCoverage || + brw->wm.prog_data->uses_omask) { dw1 |= GEN7_WM_KILL_ENABLE; + } /* _NEW_BUFFERS */ if (brw_color_buffer_write_enabled(brw) || writes_depth || @@ -97,7 +102,11 @@ upload_wm_state(struct brw_context *brw) dw1 |= GEN7_WM_MSRAST_ON_PATTERN; else dw1 |= GEN7_WM_MSRAST_OFF_PIXEL; - dw2 |= GEN7_WM_MSDISPMODE_PERPIXEL; + + if (_mesa_get_min_invocations_per_fragment(ctx, brw->fragment_program) > 1) + dw2 |= GEN7_WM_MSDISPMODE_PERSAMPLE; + else + dw2 |= GEN7_WM_MSDISPMODE_PERPIXEL; } else { dw1 |= GEN7_WM_MSRAST_OFF_PIXEL; dw2 |= GEN7_WM_MSDISPMODE_PERSAMPLE; @@ -169,6 +178,32 @@ upload_ps_state(struct brw_context *brw) if (brw->wm.prog_data->nr_params > 0) dw4 |= GEN7_PS_PUSH_CONSTANT_ENABLE; + /* From the IVB PRM, volume 2 part 1, page 287: + * "This bit is inserted in the PS payload header and made available to + * the DataPort (either via the message header or via header bypass) to + * indicate that oMask data (one or two phases) is included in Render + * Target Write messages. If present, the oMask data is used to mask off + * samples." + */ + if (brw->wm.prog_data->uses_omask) + dw4 |= GEN7_PS_OMASK_TO_RENDER_TARGET; + + /* From the IVB PRM, volume 2 part 1, page 287: + * "If the PS kernel does not need the Position XY Offsets to + * compute a Position Value, then this field should be programmed + * to POSOFFSET_NONE." + * "SW Recommendation: If the PS kernel needs the Position Offsets + * to compute a Position XY value, this field should match Position + * ZW Interpolation Mode to ensure a consistent position.xyzw + * computation." + * We only require XY sample offsets. So, this recommendation doesn't + * look useful at the moment. We might need this in future. + */ + if (brw->wm.prog_data->uses_pos_offset) + dw4 |= GEN7_PS_POSOFFSET_SAMPLE; + else + dw4 |= GEN7_PS_POSOFFSET_NONE; + /* CACHE_NEW_WM_PROG | _NEW_COLOR * * The hardware wedges if you have this bit set but don't turn on any dual @@ -184,9 +219,22 @@ upload_ps_state(struct brw_context *brw) if (brw->wm.prog_data->num_varying_inputs != 0) dw4 |= GEN7_PS_ATTRIBUTE_ENABLE; - dw4 |= GEN7_PS_8_DISPATCH_ENABLE; - if (brw->wm.prog_data->prog_offset_16) + /* In case of non 1x per sample shading, only one of SIMD8 and SIMD16 + * should be enabled. We do 'SIMD16 only' dispatch if a SIMD16 shader + * is successfully compiled. In majority of the cases that bring us + * better performance than 'SIMD8 only' dispatch. + */ + int min_inv_per_frag = + _mesa_get_min_invocations_per_fragment(ctx, brw->fragment_program); + assert(min_inv_per_frag >= 1); + + if (brw->wm.prog_data->prog_offset_16) { dw4 |= GEN7_PS_16_DISPATCH_ENABLE; + if (min_inv_per_frag == 1) + dw4 |= GEN7_PS_8_DISPATCH_ENABLE; + } + else + dw4 |= GEN7_PS_8_DISPATCH_ENABLE; dw5 |= (brw->wm.prog_data->first_curbe_grf << GEN7_PS_DISPATCH_START_GRF_SHIFT_0); @@ -195,7 +243,10 @@ upload_ps_state(struct brw_context *brw) BEGIN_BATCH(8); OUT_BATCH(_3DSTATE_PS << 16 | (8 - 2)); - OUT_BATCH(brw->wm.base.prog_offset); + if (brw->wm.prog_data->prog_offset_16 && min_inv_per_frag > 1) + OUT_BATCH(brw->wm.base.prog_offset + brw->wm.prog_data->prog_offset_16); + else + OUT_BATCH(brw->wm.base.prog_offset); OUT_BATCH(dw2); if (brw->wm.prog_data->total_scratch) { OUT_RELOC(brw->wm.base.scratch_bo,