From: Pedro Alves Date: Wed, 24 Feb 2016 22:52:06 +0000 (+0000) Subject: Handle MIPS Linux SIGTRAP siginfo.si_code values X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=e7ad2f145c05bc60b1cd2796c8f3b72f02e3e730;p=binutils-gdb.git Handle MIPS Linux SIGTRAP siginfo.si_code values This unbreaks pending/delayed breakpoints handling, as well as hardware watchpoints, on MIPS. Ref: https://sourceware.org/ml/gdb-patches/2016-02/msg00681.html The MIPS kernel reports SI_KERNEL for all kernel generated traps, instead of TRAP_BRKPT / TRAP_HWBKPT, but GDB isn't aware of this. Basically, this commit: - Folds watchpoints logic into check_stopped_by_breakpoint, and renames it to save_stop_reason. - Adds GDB_ARCH_IS_TRAP_HWBKPT. - Makes MIPS set both GDB_ARCH_IS_TRAP_BRPT and GDB_ARCH_IS_TRAP_HWBKPT to SI_KERNEL. In save_stop_reason, we handle the case of the same si_code returning true for both TRAP_BRPT and TRAP_HWBKPT by looking at what the debug registers say. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2016-02-24 Pedro Alves * linux-nat.c (save_sigtrap) Delete. (stop_wait_callback): Call save_stop_reason instead of save_sigtrap. (check_stopped_by_breakpoint): Rename to ... (save_stop_reason): ... this. Bits of save_sigtrap folded here. Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out common code between the USE_SIGTRAP_SIGINFO and !USE_SIGTRAP_SIGINFO blocks. (linux_nat_filter_event): Call save_stop_reason instead of save_sigtrap. * nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT si_code for MIPS. * nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add comments on MIPS behavior. (GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs. gdb/gdbserver/ChangeLog: 2016-02-24 Pedro Alves * linux-low.c (check_stopped_by_breakpoint): Rename to ... (save_stop_reason): ... this. Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out common code between the USE_SIGTRAP_SIGINFO and !USE_SIGTRAP_SIGINFO blocks. (linux_low_filter_event): Call save_stop_reason instead of check_stopped_by_breakpoint and check_stopped_by_watchpoint. Update comments. (linux_wait_1): Update comments. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 95cabdb74f4..0d6ea60bf72 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,22 @@ +2016-02-24 Pedro Alves + + * linux-nat.c (save_sigtrap) Delete. + (stop_wait_callback): Call save_stop_reason instead of + save_sigtrap. + (check_stopped_by_breakpoint): Rename to ... + (save_stop_reason): ... this. Bits of save_sigtrap folded here. + Use GDB_ARCH_IS_TRAP_HWBKPT and handle ambiguous + GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. Factor out + common code between the USE_SIGTRAP_SIGINFO and + !USE_SIGTRAP_SIGINFO blocks. + (linux_nat_filter_event): Call save_stop_reason instead of + save_sigtrap. + * nat/linux-ptrace.h: Check for both SI_KERNEL and TRAP_BRKPT + si_code for MIPS. + * nat/linux-ptrace.h: Fix "TRAP_HWBPT" typo in x86 table. Add + comments on MIPS behavior. + (GDB_ARCH_IS_TRAP_HWBKPT): Define for all archs. + 2016-02-24 Marcin Kościelnicki * rs6000-tdep.c (rs6000_frame_cache): Initialize frame and pc to 0 diff --git a/gdb/gdbserver/ChangeLog b/gdb/gdbserver/ChangeLog index 8c4dab406c8..3ec48fa4499 100644 --- a/gdb/gdbserver/ChangeLog +++ b/gdb/gdbserver/ChangeLog @@ -1,3 +1,15 @@ +2016-02-24 Pedro Alves + + * linux-low.c (check_stopped_by_breakpoint): Rename to ... + (save_stop_reason): ... this. Use GDB_ARCH_IS_TRAP_HWBKPT and + handle ambiguous GDB_ARCH_IS_TRAP_BRKPT / GDB_ARCH_IS_TRAP_HWBKPT. + Factor out common code between the USE_SIGTRAP_SIGINFO and + !USE_SIGTRAP_SIGINFO blocks. + (linux_low_filter_event): Call save_stop_reason instead of + check_stopped_by_breakpoint and check_stopped_by_watchpoint. + Update comments. + (linux_wait_1): Update comments. + 2016-02-24 Wei-cheng Wang * linux-ppc-low.c (ppc_supports_z_point_type): New function: diff --git a/gdb/gdbserver/linux-low.c b/gdb/gdbserver/linux-low.c index 8b025bd1b0a..5e7560f8de6 100644 --- a/gdb/gdbserver/linux-low.c +++ b/gdb/gdbserver/linux-low.c @@ -735,32 +735,16 @@ get_syscall_trapinfo (struct lwp_info *lwp, int *sysno, int *sysret) current_thread = saved_thread; } -/* This function should only be called if LWP got a SIGTRAP. - The SIGTRAP could mean several things. +static int check_stopped_by_watchpoint (struct lwp_info *child); - On i386, where decr_pc_after_break is non-zero: - - If we were single-stepping this process using PTRACE_SINGLESTEP, we - will get only the one SIGTRAP. The value of $eip will be the next - instruction. If the instruction we stepped over was a breakpoint, - we need to decrement the PC. - - If we continue the process using PTRACE_CONT, we will get a - SIGTRAP when we hit a breakpoint. The value of $eip will be - the instruction after the breakpoint (i.e. needs to be - decremented). If we report the SIGTRAP to GDB, we must also - report the undecremented PC. If the breakpoint is removed, we - must resume at the decremented PC. - - On a non-decr_pc_after_break machine with hardware or kernel - single-step: - - If we either single-step a breakpoint instruction, or continue and - hit a breakpoint instruction, our PC will point at the breakpoint - instruction. */ +/* Called when the LWP stopped for a signal/trap. If it stopped for a + trap check what caused it (breakpoint, watchpoint, trace, etc.), + and save the result in the LWP's stop_reason field. If it stopped + for a breakpoint, decrement the PC if necessary on the lwp's + architecture. Returns true if we now have the LWP's stop PC. */ static int -check_stopped_by_breakpoint (struct lwp_info *lwp) +save_stop_reason (struct lwp_info *lwp) { CORE_ADDR pc; CORE_ADDR sw_breakpoint_pc; @@ -785,56 +769,39 @@ check_stopped_by_breakpoint (struct lwp_info *lwp) { if (siginfo.si_signo == SIGTRAP) { - if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code)) + if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code) + && GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code)) { - if (debug_threads) - { - struct thread_info *thr = get_lwp_thread (lwp); - - debug_printf ("CSBB: %s stopped by software breakpoint\n", - target_pid_to_str (ptid_of (thr))); - } - - /* Back up the PC if necessary. */ - if (pc != sw_breakpoint_pc) - { - struct regcache *regcache - = get_thread_regcache (current_thread, 1); - (*the_low_target.set_pc) (regcache, sw_breakpoint_pc); - } - - lwp->stop_pc = sw_breakpoint_pc; + /* The si_code is ambiguous on this arch -- check debug + registers. */ + if (!check_stopped_by_watchpoint (lwp)) + lwp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT; + } + else if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code)) + { + /* If we determine the LWP stopped for a SW breakpoint, + trust it. Particularly don't check watchpoint + registers, because at least on s390, we'd find + stopped-by-watchpoint as long as there's a watchpoint + set. */ lwp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT; - current_thread = saved_thread; - return 1; } - else if (siginfo.si_code == TRAP_HWBKPT) + else if (GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code)) { - if (debug_threads) - { - struct thread_info *thr = get_lwp_thread (lwp); - - debug_printf ("CSBB: %s stopped by hardware " - "breakpoint/watchpoint\n", - target_pid_to_str (ptid_of (thr))); - } - - lwp->stop_pc = pc; - lwp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT; - current_thread = saved_thread; - return 1; + /* This can indicate either a hardware breakpoint or + hardware watchpoint. Check debug registers. */ + if (!check_stopped_by_watchpoint (lwp)) + lwp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT; } else if (siginfo.si_code == TRAP_TRACE) { - if (debug_threads) - { - struct thread_info *thr = get_lwp_thread (lwp); - - debug_printf ("CSBB: %s stopped by trace\n", - target_pid_to_str (ptid_of (thr))); - } - - lwp->stop_reason = TARGET_STOPPED_BY_SINGLE_STEP; + /* We may have single stepped an instruction that + triggered a watchpoint. In that case, on some + architectures (such as x86), instead of TRAP_HWBKPT, + si_code indicates TRAP_TRACE, and we need to check + the debug registers separately. */ + if (!check_stopped_by_watchpoint (lwp)) + lwp->stop_reason = TARGET_STOPPED_BY_SINGLE_STEP; } } } @@ -845,6 +812,16 @@ check_stopped_by_breakpoint (struct lwp_info *lwp) case we need to report the breakpoint PC. */ if ((!lwp->stepping || lwp->stop_pc == sw_breakpoint_pc) && (*the_low_target.breakpoint_at) (sw_breakpoint_pc)) + lwp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT; + + if (hardware_breakpoint_inserted_here (pc)) + lwp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT; + + if (lwp->stop_reason == TARGET_STOPPED_BY_NO_REASON) + check_stopped_by_watchpoint (lwp); +#endif + + if (lwp->stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT) { if (debug_threads) { @@ -856,19 +833,16 @@ check_stopped_by_breakpoint (struct lwp_info *lwp) /* Back up the PC if necessary. */ if (pc != sw_breakpoint_pc) - { + { struct regcache *regcache = get_thread_regcache (current_thread, 1); (*the_low_target.set_pc) (regcache, sw_breakpoint_pc); } - lwp->stop_pc = sw_breakpoint_pc; - lwp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT; - current_thread = saved_thread; - return 1; + /* Update this so we record the correct stop PC below. */ + pc = sw_breakpoint_pc; } - - if (hardware_breakpoint_inserted_here (pc)) + else if (lwp->stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT) { if (debug_threads) { @@ -877,16 +851,31 @@ check_stopped_by_breakpoint (struct lwp_info *lwp) debug_printf ("CSBB: %s stopped by hardware breakpoint\n", target_pid_to_str (ptid_of (thr))); } + } + else if (lwp->stop_reason == TARGET_STOPPED_BY_WATCHPOINT) + { + if (debug_threads) + { + struct thread_info *thr = get_lwp_thread (lwp); - lwp->stop_pc = pc; - lwp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT; - current_thread = saved_thread; - return 1; + debug_printf ("CSBB: %s stopped by hardware watchpoint\n", + target_pid_to_str (ptid_of (thr))); + } } -#endif + else if (lwp->stop_reason == TARGET_STOPPED_BY_SINGLE_STEP) + { + if (debug_threads) + { + struct thread_info *thr = get_lwp_thread (lwp); + debug_printf ("CSBB: %s stopped by trace\n", + target_pid_to_str (ptid_of (thr))); + } + } + + lwp->stop_pc = pc; current_thread = saved_thread; - return 0; + return 1; } static struct lwp_info * @@ -2434,8 +2423,8 @@ linux_low_filter_event (int lwpid, int wstat) child->syscall_state = TARGET_WAITKIND_IGNORE; } - /* Be careful to not overwrite stop_pc until - check_stopped_by_breakpoint is called. */ + /* Be careful to not overwrite stop_pc until save_stop_reason is + called. */ if (WIFSTOPPED (wstat) && WSTOPSIG (wstat) == SIGTRAP && linux_is_extended_waitstatus (wstat)) { @@ -2448,27 +2437,12 @@ linux_low_filter_event (int lwpid, int wstat) } } - /* Check first whether this was a SW/HW breakpoint before checking - watchpoints, because at least s390 can't tell the data address of - hardware watchpoint hits, and returns stopped-by-watchpoint as - long as there's a watchpoint set. */ if (WIFSTOPPED (wstat) && linux_wstatus_maybe_breakpoint (wstat)) { - if (check_stopped_by_breakpoint (child)) + if (save_stop_reason (child)) have_stop_pc = 1; } - /* Note that TRAP_HWBKPT can indicate either a hardware breakpoint - or hardware watchpoint. Check which is which if we got - TARGET_STOPPED_BY_HW_BREAKPOINT. Likewise, we may have single - stepped an instruction that triggered a watchpoint. In that - case, on some architectures (such as x86), instead of - TRAP_HWBKPT, si_code indicates TRAP_TRACE, and we need to check - the debug registers separately. */ - if (WIFSTOPPED (wstat) && WSTOPSIG (wstat) == SIGTRAP - && child->stop_reason != TARGET_STOPPED_BY_SW_BREAKPOINT) - check_stopped_by_watchpoint (child); - if (!have_stop_pc) child->stop_pc = get_pc (child); @@ -3209,7 +3183,7 @@ linux_wait_1 (ptid_t ptid, hardware single step it means a gdb/gdbserver breakpoint had been planted on top of a permanent breakpoint, in the case of a software single step it may just mean that gdbserver hit the reinsert breakpoint. - The PC has been adjusted by check_stopped_by_breakpoint to point at + The PC has been adjusted by save_stop_reason to point at the breakpoint address. So in the case of the hardware single step advance the PC manually past the breakpoint and in the case of software single step advance only diff --git a/gdb/linux-nat.c b/gdb/linux-nat.c index 6ded38da298..0829bcb5072 100644 --- a/gdb/linux-nat.c +++ b/gdb/linux-nat.c @@ -303,10 +303,11 @@ static struct lwp_info *find_lwp_pid (ptid_t ptid); static int lwp_status_pending_p (struct lwp_info *lp); -static int check_stopped_by_breakpoint (struct lwp_info *lp); static int sigtrap_is_event (int status); static int (*linux_nat_status_is_event) (int status) = sigtrap_is_event; +static void save_stop_reason (struct lwp_info *lp); + /* LWP accessors. */ @@ -2321,30 +2322,6 @@ check_stopped_by_watchpoint (struct lwp_info *lp) return lp->stop_reason == TARGET_STOPPED_BY_WATCHPOINT; } -/* Called when the LWP stopped for a trap that could be explained by a - watchpoint or a breakpoint. */ - -static void -save_sigtrap (struct lwp_info *lp) -{ - gdb_assert (lp->stop_reason == TARGET_STOPPED_BY_NO_REASON); - gdb_assert (lp->status != 0); - - /* Check first if this was a SW/HW breakpoint before checking - watchpoints, because at least s390 can't tell the data address of - hardware watchpoint hits, and the kernel returns - stopped-by-watchpoint as long as there's a watchpoint set. */ - if (linux_nat_status_is_event (lp->status)) - check_stopped_by_breakpoint (lp); - - /* Note that TRAP_HWBKPT can indicate either a hardware breakpoint - or hardware watchpoint. Check which is which if we got - TARGET_STOPPED_BY_HW_BREAKPOINT. */ - if (lp->stop_reason == TARGET_STOPPED_BY_NO_REASON - || lp->stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT) - check_stopped_by_watchpoint (lp); -} - /* Returns true if the LWP had stopped for a watchpoint. */ static int @@ -2441,7 +2418,7 @@ stop_wait_callback (struct lwp_info *lp, void *data) /* Save the sigtrap event. */ lp->status = status; gdb_assert (lp->signalled); - save_sigtrap (lp); + save_stop_reason (lp); } else { @@ -2583,29 +2560,32 @@ select_event_lwp_callback (struct lwp_info *lp, void *data) return 0; } -/* Called when the LWP got a signal/trap that could be explained by a - software or hardware breakpoint. */ +/* Called when the LWP stopped for a signal/trap. If it stopped for a + trap check what caused it (breakpoint, watchpoint, trace, etc.), + and save the result in the LWP's stop_reason field. If it stopped + for a breakpoint, decrement the PC if necessary on the lwp's + architecture. */ -static int -check_stopped_by_breakpoint (struct lwp_info *lp) +static void +save_stop_reason (struct lwp_info *lp) { - /* Arrange for a breakpoint to be hit again later. We don't keep - the SIGTRAP status and don't forward the SIGTRAP signal to the - LWP. We will handle the current event, eventually we will resume - this LWP, and this breakpoint will trap again. - - If we do not do this, then we run the risk that the user will - delete or disable the breakpoint, but the LWP will have already - tripped on it. */ - - struct regcache *regcache = get_thread_regcache (lp->ptid); - struct gdbarch *gdbarch = get_regcache_arch (regcache); + struct regcache *regcache; + struct gdbarch *gdbarch; CORE_ADDR pc; CORE_ADDR sw_bp_pc; #if USE_SIGTRAP_SIGINFO siginfo_t siginfo; #endif + gdb_assert (lp->stop_reason == TARGET_STOPPED_BY_NO_REASON); + gdb_assert (lp->status != 0); + + if (!linux_nat_status_is_event (lp->status)) + return; + + regcache = get_thread_regcache (lp->ptid); + gdbarch = get_regcache_arch (regcache); + pc = regcache_read_pc (regcache); sw_bp_pc = pc - gdbarch_decr_pc_after_break (gdbarch); @@ -2614,33 +2594,29 @@ check_stopped_by_breakpoint (struct lwp_info *lp) { if (siginfo.si_signo == SIGTRAP) { - if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code)) + if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code) + && GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code)) { - if (debug_linux_nat) - fprintf_unfiltered (gdb_stdlog, - "CSBB: %s stopped by software " - "breakpoint\n", - target_pid_to_str (lp->ptid)); - - /* Back up the PC if necessary. */ - if (pc != sw_bp_pc) - regcache_write_pc (regcache, sw_bp_pc); - - lp->stop_pc = sw_bp_pc; + /* The si_code is ambiguous on this arch -- check debug + registers. */ + if (!check_stopped_by_watchpoint (lp)) + lp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT; + } + else if (GDB_ARCH_IS_TRAP_BRKPT (siginfo.si_code)) + { + /* If we determine the LWP stopped for a SW breakpoint, + trust it. Particularly don't check watchpoint + registers, because at least on s390, we'd find + stopped-by-watchpoint as long as there's a watchpoint + set. */ lp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT; - return 1; } - else if (siginfo.si_code == TRAP_HWBKPT) + else if (GDB_ARCH_IS_TRAP_HWBKPT (siginfo.si_code)) { - if (debug_linux_nat) - fprintf_unfiltered (gdb_stdlog, - "CSBB: %s stopped by hardware " - "breakpoint/watchpoint\n", - target_pid_to_str (lp->ptid)); - - lp->stop_pc = pc; - lp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT; - return 1; + /* This can indicate either a hardware breakpoint or + hardware watchpoint. Check debug registers. */ + if (!check_stopped_by_watchpoint (lp)) + lp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT; } else if (siginfo.si_code == TRAP_TRACE) { @@ -2648,6 +2624,13 @@ check_stopped_by_breakpoint (struct lwp_info *lp) fprintf_unfiltered (gdb_stdlog, "CSBB: %s stopped by trace\n", target_pid_to_str (lp->ptid)); + + /* We may have single stepped an instruction that + triggered a watchpoint. In that case, on some + architectures (such as x86), instead of TRAP_HWBKPT, + si_code indicates TRAP_TRACE, and we need to check + the debug registers separately. */ + check_stopped_by_watchpoint (lp); } } } @@ -2658,6 +2641,18 @@ check_stopped_by_breakpoint (struct lwp_info *lp) { /* The LWP was either continued, or stepped a software breakpoint instruction. */ + lp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT; + } + + if (hardware_breakpoint_inserted_here_p (get_regcache_aspace (regcache), pc)) + lp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT; + + if (lp->stop_reason == TARGET_STOPPED_BY_NO_REASON) + check_stopped_by_watchpoint (lp); +#endif + + if (lp->stop_reason == TARGET_STOPPED_BY_SW_BREAKPOINT) + { if (debug_linux_nat) fprintf_unfiltered (gdb_stdlog, "CSBB: %s stopped by software breakpoint\n", @@ -2667,25 +2662,25 @@ check_stopped_by_breakpoint (struct lwp_info *lp) if (pc != sw_bp_pc) regcache_write_pc (regcache, sw_bp_pc); - lp->stop_pc = sw_bp_pc; - lp->stop_reason = TARGET_STOPPED_BY_SW_BREAKPOINT; - return 1; + /* Update this so we record the correct stop PC below. */ + pc = sw_bp_pc; } - - if (hardware_breakpoint_inserted_here_p (get_regcache_aspace (regcache), pc)) + else if (lp->stop_reason == TARGET_STOPPED_BY_HW_BREAKPOINT) { if (debug_linux_nat) fprintf_unfiltered (gdb_stdlog, - "CSBB: stopped by hardware breakpoint %s\n", + "CSBB: %s stopped by hardware breakpoint\n", + target_pid_to_str (lp->ptid)); + } + else if (lp->stop_reason == TARGET_STOPPED_BY_WATCHPOINT) + { + if (debug_linux_nat) + fprintf_unfiltered (gdb_stdlog, + "CSBB: %s stopped by hardware watchpoint\n", target_pid_to_str (lp->ptid)); - - lp->stop_pc = pc; - lp->stop_reason = TARGET_STOPPED_BY_HW_BREAKPOINT; - return 1; } -#endif - return 0; + lp->stop_pc = pc; } @@ -3057,7 +3052,7 @@ linux_nat_filter_event (int lwpid, int status) /* An interesting event. */ gdb_assert (lp); lp->status = status; - save_sigtrap (lp); + save_stop_reason (lp); return lp; } diff --git a/gdb/nat/linux-ptrace.h b/gdb/nat/linux-ptrace.h index ba5871748cc..b9123c9ea61 100644 --- a/gdb/nat/linux-ptrace.h +++ b/gdb/nat/linux-ptrace.h @@ -119,14 +119,14 @@ struct buffer; /* The x86 kernel gets some of the si_code values backwards, like this: - | what | si_code | - |------------------------------------------+------------| - | software breakpoints (int3) | SI_KERNEL | - | single-steps | TRAP_TRACE | - | single-stepping a syscall | TRAP_BRKPT | - | user sent SIGTRAP | 0 | - | exec SIGTRAP (when no PTRACE_EVENT_EXEC) | 0 | - | hardware breakpoints/watchpoints | TRAP_HWBPT | + | what | si_code | + |------------------------------------------+-------------| + | software breakpoints (int3) | SI_KERNEL | + | single-steps | TRAP_TRACE | + | single-stepping a syscall | TRAP_BRKPT | + | user sent SIGTRAP | 0 | + | exec SIGTRAP (when no PTRACE_EVENT_EXEC) | 0 | + | hardware breakpoints/watchpoints | TRAP_HWBKPT | That is, it reports SI_KERNEL for software breakpoints (and only for those), and TRAP_BRKPT for single-stepping a syscall... If the @@ -140,14 +140,32 @@ struct buffer; in SPU code on a Cell/B.E. However, SI_KERNEL is never seen on a SIGTRAP for any other reason. - The generic Linux target code should use GDB_ARCH_IS_TRAP_BRKPT - instead of TRAP_BRKPT to abstract out these peculiarities. */ + The MIPS kernel uses SI_KERNEL for all kernel generated traps. + Since: + + - MIPS doesn't do hardware single-step. + - We don't need to care about exec SIGTRAPs --- we assume + PTRACE_EVENT_EXEC is available. + - The MIPS kernel doesn't support hardware breakpoints. + + on MIPS, all we need to care about is distinguishing between + software breakpoints and hardware watchpoints, which can be done by + peeking the debug registers. + + The generic Linux target code should use GDB_ARCH_IS_TRAP_* instead + of TRAP_* to abstract out these peculiarities. */ #if defined __i386__ || defined __x86_64__ # define GDB_ARCH_IS_TRAP_BRKPT(X) ((X) == SI_KERNEL) +# define GDB_ARCH_IS_TRAP_HWBKPT(X) ((X) == TRAP_HWBKPT) #elif defined __powerpc__ # define GDB_ARCH_IS_TRAP_BRKPT(X) ((X) == SI_KERNEL || (X) == TRAP_BRKPT) +# define GDB_ARCH_IS_TRAP_HWBKPT(X) ((X) == TRAP_HWBKPT) +#elif defined __mips__ +# define GDB_ARCH_IS_TRAP_BRKPT(X) ((X) == SI_KERNEL) +# define GDB_ARCH_IS_TRAP_HWBKPT(X) ((X) == SI_KERNEL) #else # define GDB_ARCH_IS_TRAP_BRKPT(X) ((X) == TRAP_BRKPT) +# define GDB_ARCH_IS_TRAP_HWBKPT(X) ((X) == TRAP_HWBKPT) #endif #ifndef TRAP_HWBKPT