From: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Date: Mon, 1 Oct 2018 11:00:31 +0000 (+0100)
Subject: add sv scalar src test which highlighted flaw in spike-sv
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=ecf9aeea425a1978b7ac9aa9e41e68af66693d52;p=riscv-tests.git

add sv scalar src test which highlighted flaw in spike-sv
---

diff --git a/isa/rv64ui/Makefrag.sv b/isa/rv64ui/Makefrag.sv
index 8c9b0a6..eac21e2 100644
--- a/isa/rv64ui/Makefrag.sv
+++ b/isa/rv64ui/Makefrag.sv
@@ -5,6 +5,7 @@
 rv64ui_sv_tests = \
 	sv_addi \
 	sv_addi_redirect \
+	sv_addi_scalar_src \
 
 rv64ui_p_tests = $(addprefix rv64ui-p-, $(rv64ui_sv_tests))
 rv64ui_v_tests = $(addprefix rv64ui-v-, $(rv64ui_sv_tests))
diff --git a/isa/rv64ui/sv_addi_scalar_src.S b/isa/rv64ui/sv_addi_scalar_src.S
new file mode 100644
index 0000000..2d1e974
--- /dev/null
+++ b/isa/rv64ui/sv_addi_scalar_src.S
@@ -0,0 +1,59 @@
+#include "riscv_test.h"
+#include "sv_test_macros.h"
+
+RVTEST_RV64U        # Define TVM used by program.
+
+
+# SV test: sets up x6 data as a scalar, sets VL to 2, and carries out
+# an "add 1 to x6 and store in x3".
+# which actually means:
+# "add add 1 to x6 and store in x3" *AND*
+# "add add 1 to x6 and store in x4" 
+
+# Test code region.
+RVTEST_CODE_BEGIN   # Start of test code.
+
+        SV_LD_DATA( x2, testdata   , 0)
+        SV_LD_DATA( x5, testdata+24, 0)
+
+        li x6, 41
+
+        SET_SV_MVL(2)
+        SET_SV_CSR(1, 3, 0, 3, 1, 0)
+        SET_SV_VL(2)
+
+        addi    x3, x6, 1
+
+        CLR_SV_CSRS()
+        SET_SV_VL(0)
+        SET_SV_MVL(0)
+
+        TEST_SV_IMM(x2, 1001) # should not be modified
+        TEST_SV_IMM(x3, 42)
+        TEST_SV_IMM(x4, 42)
+        TEST_SV_IMM(x5, 1002) # should not be modified
+
+        RVTEST_PASS           # Signal success.
+fail:
+        RVTEST_FAIL
+RVTEST_CODE_END     # End of test code.
+
+# Input data section.
+# This section is optional, and this data is NOT saved in the output.
+.data
+        .align 3
+testdata:
+        .dword 1001
+        .dword 49
+        .dword 49
+        .dword 1002
+
+# Output data section.
+RVTEST_DATA_BEGIN   # Start of test output data region.
+        .align 3
+result:
+        .dword -1
+        .dword -1
+        .dword -1
+RVTEST_DATA_END     # End of test output data region.
+