From: Fabio Estevam Date: Sat, 5 May 2018 23:12:23 +0000 (-0300) Subject: configs/freescale_imx31_3stack: Remove target X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=ed947dce162dca71d47abda61861d2080469197c;p=buildroot.git configs/freescale_imx31_3stack: Remove target Currently this target fails to build: arch/arm/mach-imx/built-in.o: In function `init_mmdc_lpddr2_settings': platform-spi_imx.c:(.text+0x8f18): undefined reference to `imx6sll_lpddr2_freq_change' arch/arm/mach-imx/built-in.o: In function `imx6ul_cpuidle_init': platform-spi_imx.c:(.init.text+0x195c): undefined reference to `mx6ull_lpm_wfi_end' platform-spi_imx.c:(.init.text+0x1960): undefined reference to `mx6ull_lpm_wfi_start' platform-spi_imx.c:(.init.text+0x1964): undefined reference to `imx6ull_low_power_idle' arch/arm/mach-imx/built-in.o: In function `imx6sl_init_late': platform-spi_imx.c:(.init.text+0x56f0): undefined reference to `imx6sll_cpuidle_init' Makefile:969: recipe for target 'vmlinux' failed NXP 4.9 kernel does not properly support mx31, so better remove this target. mx31_3stack board is currently supported in U-Boot and kernel mainline, so if someone is interested on this board, then a target can be introduced later which uses these mainline components. Currently I do not have access to this board, so remove it its defconfig for now. Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/66561688 Signed-off-by: Fabio Estevam Signed-off-by: Peter Korsgaard --- diff --git a/board/freescale/imx31_3stack/linux.fragment b/board/freescale/imx31_3stack/linux.fragment deleted file mode 100644 index beb6b46f2e..0000000000 --- a/board/freescale/imx31_3stack/linux.fragment +++ /dev/null @@ -1 +0,0 @@ -# CONFIG_FB_MXS is not set diff --git a/board/freescale/imx31_3stack/readme.txt b/board/freescale/imx31_3stack/readme.txt deleted file mode 100644 index 4f8f393b12..0000000000 --- a/board/freescale/imx31_3stack/readme.txt +++ /dev/null @@ -1,92 +0,0 @@ -************************************** -Freescale i.MX31 PDK development board -************************************** - -This file documents the Buildroot support for the Freescale i.MX31 PDK in "3 -stack" configuration. - -The i.MX31 Product Development Kit (or PDK) is Freescale development board [1] -based on the i.MX31 application processor [2]. - -For more details on the i.MX31 PDK board, refer to the User's Guide [3]. - -Build -===== - -First, configure Buildroot for your i.MX31 PDK board: - - make freescale_imx31_3stack_defconfig - -Build all components: - - make - -You will find in ./output/images/ the following files: - - rootfs.cpio - - rootfs.cpio.gz - - rootfs.tar - - zImage - -The generated zImage does include the rootfs. - -Boot the PDK board -================== - -The i.MX31 PDK contains a RedBoot bootloader in flash, which can be used to -boot the newly created Buildroot images from the network. - -This necessitates to setup a TFTP server first. This setup is explained for -example in Freescale i.MX31 PDK 1.5 Linux User's Guide [4]. - -Here is a sample RedBoot configuration, for proper network boot of Buildroot on -the i.MX31 PDK: - - RedBoot> fconfig -l - Run script at boot: true - Boot script: - .. load -r -b 0x100000 zImage - .. exec -c "console=ttymxc0,115200" - - Boot script timeout (1000ms resolution): 2 - Use BOOTP for network configuration: false - Gateway IP address: - Local IP address: - Local IP address mask: 255.255.255.0 - Default server IP address: - Board specifics: 0 - Console baud rate: 115200 - Set eth0 network hardware address [MAC]: false - GDB connection port: 9000 - Force console for special debug messages: false - Network debug at boot time: false - -Adapt those settings to your network configuration by replacing the appropriate -network addresses where necessary. - -You might want to verify that your i.MX31 PDK switches settings are the correct -ones for UART, power, boot mode, etc. Here is a reference switches -configuration: - - SW4 - 1 2 3 4 5 6 7 8 - ON off off off off off off ON - - SW5 SW6 SW7 SW8 SW9 SW10 - 0 1 0 0 0 0 - -See the i.MX31 PDK Linux Quick Start Guide [5] for more details on the switches -settings. - -Connect a serial terminal set to 115200n8 and power on the i.MX31 PDK board. -Buildroot will present a login prompt on the serial port. - -Enjoy! - -References -========== - -[1] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX31PDK -[2] http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=i.MX31 -[3] http://cache.freescale.com/files/32bit/doc/user_guide/pdk15_imx31_Hardware_UG.pdf -[4] http://cache.freescale.com/files/32bit/doc/support_info/IMX31_PDK15_LINUXDOCS_BUNDLE.zip, pdk15_imx31__Linux_UG.pdf -[5] http://www.freescale.com/files/32bit/doc/quick_ref_guide/PDK14LINUXQUICKSTART.pdf diff --git a/configs/freescale_imx31_3stack_defconfig b/configs/freescale_imx31_3stack_defconfig deleted file mode 100644 index 025f93f6a6..0000000000 --- a/configs/freescale_imx31_3stack_defconfig +++ /dev/null @@ -1,20 +0,0 @@ -# architecture -BR2_arm=y -BR2_arm1136jf_s=y -BR2_ARM_EABIHF=y - -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y - -# system -BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" - -# kernel -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_GIT=y -BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/imx/linux-imx.git" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.9.x_1.0.0_ga" -BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" -BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/freescale/imx31_3stack/linux.fragment" -BR2_TARGET_ROOTFS_CPIO_GZIP=y -BR2_TARGET_ROOTFS_INITRAMFS=y