From: Andrew Burgess Date: Mon, 27 Oct 2014 10:51:17 +0000 (+0000) Subject: AVR: Assembler now prepares for linker relaxation by default. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=edc9e9a62fddb2745093c1edafd0a2310e79a579;p=binutils-gdb.git AVR: Assembler now prepares for linker relaxation by default. Have the assembler prepare for linker relaxation by default. This means that users will be able to make use of linker relaxation without having to adjust the assembler flags, this can make life easier when compiling libraries. Having this on by default in the assembler should make no difference to the assembler code produced, however, some of the debug information will be slightly less compressed. A few tests needed to be updated as a result of this change as they relied on linker relaxation support being off by default. I've tightened up the definition of which sections can be relaxed on AVR as part of this commit, the assembler used to think that all non-debugging sections could be relaxed, when in reality only code sections can be relaxed for AVR. The previous definition was not dangerous, just over cautious. The new tighter definition allows an extra test (gas/testsuite/gas/all/forward.d) to continue to pass. gas/ChangeLog: * config/tc-avr.c (struct avr_opt_s): Change link_relax to no_link_relax, extend comment. (enum options): Add new OPTION_NO_LINK_RELAX. (md_longopts): Add entry for -mno-link-relax. (md_parse_option): Handle OPTION_NO_LINK_RELAX, and update OPTION_LINK_RELAX. (md_begin): Initialise linkrelax from no_link_relax. (md_show_usage): Include -mno-link-relax option. (relaxable_section): Only allocatable code sections can be relaxed. * config/tc-avr.h (TC_LINKRELAX_FIXUP): Define. gas/testsuite/ChangeLog: * gas/all/gas.exp: Test will not pass on AVR due to linker relaxation support. * gas/avr/noreloc_withoutrelax.d: Add -mno-link-relax option. * gas/avr/link-relax-elf-flag-clear.d: Likewise. ld/testsuite/ChangeLog: * ld/testsuite/ld-avr/relax-elf-flags-02.d: Add -mno-link-relax option. * ld/testsuite/ld-avr/relax-elf-flags-03.d: Likewise. * ld/testsuite/ld-avr/relax-elf-flags-04.d: Likewise. * ld/testsuite/ld-avr/relax-elf-flags-05.d: Likewise. * ld/testsuite/ld-avr/relax-elf-flags-06.d: Likewise. --- diff --git a/gas/ChangeLog b/gas/ChangeLog index d5c489a533d..f2811604160 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,16 @@ +2014-12-24 Andrew Burgess + + * config/tc-avr.c (struct avr_opt_s): Change link_relax to + no_link_relax, extend comment. + (enum options): Add new OPTION_NO_LINK_RELAX. + (md_longopts): Add entry for -mno-link-relax. + (md_parse_option): Handle OPTION_NO_LINK_RELAX, and update + OPTION_LINK_RELAX. + (md_begin): Initialise linkrelax from no_link_relax. + (md_show_usage): Include -mno-link-relax option. + (relaxable_section): Only allocatable code sections can be + relaxed. + 2014-12-23 Andrew Burgess * config/tc-avr.c: Add include for elf/avr.h. diff --git a/gas/config/tc-avr.c b/gas/config/tc-avr.c index bda0bd63698..79560acf17a 100644 --- a/gas/config/tc-avr.c +++ b/gas/config/tc-avr.c @@ -345,8 +345,8 @@ struct avr_opt_s int all_opcodes; /* -mall-opcodes: accept all known AVR opcodes. */ int no_skip_bug; /* -mno-skip-bug: no warnings for skipping 2-word insns. */ int no_wrap; /* -mno-wrap: reject rjmp/rcall with 8K wrap-around. */ - int link_relax; /* -mlink-relax: generate relocations for linker - relaxation. */ + int no_link_relax; /* -mno-link-relax / -mlink-relax: generate (or not) + relocations for linker relaxation. */ }; static struct avr_opt_s avr_opt = { 0, 0, 0, 0 }; @@ -411,7 +411,8 @@ enum options OPTION_NO_SKIP_BUG, OPTION_NO_WRAP, OPTION_ISA_RMW, - OPTION_LINK_RELAX + OPTION_LINK_RELAX, + OPTION_NO_LINK_RELAX }; struct option md_longopts[] = @@ -422,6 +423,7 @@ struct option md_longopts[] = { "mno-wrap", no_argument, NULL, OPTION_NO_WRAP }, { "mrmw", no_argument, NULL, OPTION_ISA_RMW }, { "mlink-relax", no_argument, NULL, OPTION_LINK_RELAX }, + { "mno-link-relax", no_argument, NULL, OPTION_NO_LINK_RELAX }, { NULL, no_argument, NULL, 0 } }; @@ -528,8 +530,9 @@ md_show_usage (FILE *stream) " -mno-wrap reject rjmp/rcall instructions with 8K wrap-around\n" " (default for avr3, avr5)\n" " -mrmw accept Read-Modify-Write instructions\n" - " -mlink-relax generate relocations for linker relaxation\n" - )); + " -mlink-relax generate relocations for linker relaxation (default)\n" + " -mno-link-relax don't generate relocations for linker relaxation.\n" + )); show_mcu_list (stream); } @@ -600,7 +603,10 @@ md_parse_option (int c, char *arg) specified_mcu.isa |= AVR_ISA_RMW; return 1; case OPTION_LINK_RELAX: - avr_opt.link_relax = 1; + avr_opt.no_link_relax = 0; + return 1; + case OPTION_NO_LINK_RELAX: + avr_opt.no_link_relax = 1; return 1; } @@ -652,7 +658,7 @@ md_begin (void) } bfd_set_arch_mach (stdoutput, TARGET_ARCH, avr_mcu->mach); - linkrelax = avr_opt.link_relax; + linkrelax = !avr_opt.no_link_relax; } /* Resolve STR as a constant expression and return the result. @@ -1239,7 +1245,9 @@ md_pcrel_from_section (fixS *fixp, segT sec) static bfd_boolean relaxable_section (asection *sec) { - return (sec->flags & SEC_DEBUGGING) == 0; + return ((sec->flags & SEC_DEBUGGING) == 0 + && (sec->flags & SEC_CODE) != 0 + && (sec->flags & SEC_ALLOC) != 0); } /* Does whatever the xtensa port does. */ diff --git a/gas/testsuite/ChangeLog b/gas/testsuite/ChangeLog index d6d64506bdd..772ee7d4baf 100644 --- a/gas/testsuite/ChangeLog +++ b/gas/testsuite/ChangeLog @@ -1,3 +1,10 @@ +2014-12-24 Andrew Burgess + + * gas/all/gas.exp: Test will not pass on AVR due to linker + relaxation support. + * gas/avr/noreloc_withoutrelax.d: Add -mno-link-relax option. + * gas/avr/link-relax-elf-flag-clear.d: Likewise. + 2014-12-23 Andrew Burgess * gas/avr/link-relax-elf-flag-clear.d: New file. diff --git a/gas/testsuite/gas/all/gas.exp b/gas/testsuite/gas/all/gas.exp index 8fa89e41a83..6002def9737 100644 --- a/gas/testsuite/gas/all/gas.exp +++ b/gas/testsuite/gas/all/gas.exp @@ -55,9 +55,10 @@ if { ![istarget cris-*-*] && ![istarget crisv32-*-*] # The MN10300 port supports link time relaxation which in turn allows # for link time resolution of the differneces of two symbols which are # undefined at assembly time. Hence this test will not pass for the -# MN10300. The same thing is true for the RX port as well. +# MN10300. The same thing is true for the RX and AVR port as well. if { ![istarget hppa*-*-*] && ![istarget alpha*-*-*vms*] + && ![istarget avr-*-*] && ![istarget rx-*-*] && ![istarget mn10300-*-*] && ![istarget msp430*-*-*] diff --git a/gas/testsuite/gas/avr/link-relax-elf-flag-clear.d b/gas/testsuite/gas/avr/link-relax-elf-flag-clear.d index 88cd3c9d4b9..e7ef22c9de2 100644 --- a/gas/testsuite/gas/avr/link-relax-elf-flag-clear.d +++ b/gas/testsuite/gas/avr/link-relax-elf-flag-clear.d @@ -1,5 +1,5 @@ #name: AVR, check elf link-relax header flag is clear. -#as: -mmcu=avrxmega2 +#as: -mno-link-relax -mmcu=avrxmega2 #readelf: -h #source: link-relax-elf-flag.s #target: avr-*-* diff --git a/gas/testsuite/gas/avr/noreloc_withoutrelax.d b/gas/testsuite/gas/avr/noreloc_withoutrelax.d index daaaeb281d4..7ec7d32066d 100644 --- a/gas/testsuite/gas/avr/noreloc_withoutrelax.d +++ b/gas/testsuite/gas/avr/noreloc_withoutrelax.d @@ -1,5 +1,5 @@ #name: AVR no DIFF relocs without link relax -#as: -mmcu=avrxmega2 +#as: -mmcu=avrxmega2 -mno-link-relax #objdump: -r #source: relax.s #target: avr-*-* diff --git a/ld/testsuite/ChangeLog b/ld/testsuite/ChangeLog index 628c9068dbb..d987267775c 100644 --- a/ld/testsuite/ChangeLog +++ b/ld/testsuite/ChangeLog @@ -1,3 +1,12 @@ +2014-12-24 Andrew Burgess + + * ld/testsuite/ld-avr/relax-elf-flags-02.d: Add -mno-link-relax + option. + * ld/testsuite/ld-avr/relax-elf-flags-03.d: Likewise. + * ld/testsuite/ld-avr/relax-elf-flags-04.d: Likewise. + * ld/testsuite/ld-avr/relax-elf-flags-05.d: Likewise. + * ld/testsuite/ld-avr/relax-elf-flags-06.d: Likewise. + 2014-12-24 Alan Modra * ld-scripts/defined6.s, diff --git a/ld/testsuite/ld-avr/relax-elf-flags-02.d b/ld/testsuite/ld-avr/relax-elf-flags-02.d index 6a008bd8e61..c4d76605b17 100644 --- a/ld/testsuite/ld-avr/relax-elf-flags-02.d +++ b/ld/testsuite/ld-avr/relax-elf-flags-02.d @@ -1,7 +1,7 @@ #name: AVR, check link-relax flag is clear on partial link (first file) #as: -mmcu=avrxmega2 #ld: -r -mavrxmega2 -#source: relax-elf-flags-a.s +#source: relax-elf-flags-a.s -mno-link-relax #source: relax-elf-flags-b.s -mlink-relax #readelf: -h #target: avr-*-* diff --git a/ld/testsuite/ld-avr/relax-elf-flags-03.d b/ld/testsuite/ld-avr/relax-elf-flags-03.d index 3d2a70df212..c75c1dfd499 100644 --- a/ld/testsuite/ld-avr/relax-elf-flags-03.d +++ b/ld/testsuite/ld-avr/relax-elf-flags-03.d @@ -2,7 +2,7 @@ #as: -mmcu=avrxmega2 #ld: -r -mavrxmega2 #source: relax-elf-flags-a.s -mlink-relax -#source: relax-elf-flags-b.s +#source: relax-elf-flags-b.s -mno-link-relax #readelf: -h #target: avr-*-* diff --git a/ld/testsuite/ld-avr/relax-elf-flags-04.d b/ld/testsuite/ld-avr/relax-elf-flags-04.d index e2a9bb6fdf2..8fa45742011 100644 --- a/ld/testsuite/ld-avr/relax-elf-flags-04.d +++ b/ld/testsuite/ld-avr/relax-elf-flags-04.d @@ -1,8 +1,8 @@ #name: AVR, check link-relax flag is clear on partial link (both files) #as: -mmcu=avrxmega2 #ld: -r -mavrxmega2 -#source: relax-elf-flags-a.s -#source: relax-elf-flags-b.s +#source: relax-elf-flags-a.s -mno-link-relax +#source: relax-elf-flags-b.s -mno-link-relax #readelf: -h #target: avr-*-* diff --git a/ld/testsuite/ld-avr/relax-elf-flags-05.d b/ld/testsuite/ld-avr/relax-elf-flags-05.d index 8c41e8d6230..de62bbbd432 100644 --- a/ld/testsuite/ld-avr/relax-elf-flags-05.d +++ b/ld/testsuite/ld-avr/relax-elf-flags-05.d @@ -1,8 +1,8 @@ #name: AVR, check link-relax flag is set final link (no inputs relaxable) #as: -mmcu=avrxmega2 #ld: -relax -mavrxmega2 -#source: relax-elf-flags-a.s -#source: relax-elf-flags-b.s +#source: relax-elf-flags-a.s -mno-link-relax +#source: relax-elf-flags-b.s -mno-link-relax #readelf: -h #target: avr-*-* diff --git a/ld/testsuite/ld-avr/relax-elf-flags-06.d b/ld/testsuite/ld-avr/relax-elf-flags-06.d index 5d8e3c11831..5a8e8107e22 100644 --- a/ld/testsuite/ld-avr/relax-elf-flags-06.d +++ b/ld/testsuite/ld-avr/relax-elf-flags-06.d @@ -2,7 +2,7 @@ #as: -mmcu=avrxmega2 #ld: -relax -mavrxmega2 #source: relax-elf-flags-a.s -mlink-relax -#source: relax-elf-flags-b.s +#source: relax-elf-flags-b.s -mno-link-relax #readelf: -h #target: avr-*-*