From: Andrey Miroshnikov <andrey@technepisteme.xyz>
Date: Tue, 28 Jun 2022 11:54:25 +0000 (+0000)
Subject: Adding copy of ls180 for new soc (ls2)
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=eeaac084dae437155b7fb7941231588be80bc908;p=pinmux.git

Adding copy of ls180 for new soc (ls2)
---

diff --git a/src/spec/ls2.py b/src/spec/ls2.py
new file mode 100644
index 0000000..caec431
--- /dev/null
+++ b/src/spec/ls2.py
@@ -0,0 +1,155 @@
+#!/usr/bin/env python
+# see https://bugs.libre-soc.org/show_bug.cgi?id=739
+
+from spec.base import PinSpec
+from parse import Parse
+
+from pprint import pprint
+from spec.ifaceprint import display, display_fns, check_functions
+from spec.ifaceprint import display_fixed
+from collections import OrderedDict
+
+def pinspec():
+    pinbanks = OrderedDict((
+        ('N', (32, 2)),
+        ('E', (32, 2)),
+        ('S', (32, 2)),
+        ('W', (32, 2)),
+    ))
+    fixedpins = {
+        'CTRL_SYS': [
+            'TEST',
+            'JTAG_SEL',
+            'UBOOT_SEL',
+            'NMI#',
+            'RESET#',
+            'CLK24M_IN',
+            'CLK24M_OUT',
+            'PLLTEST',
+            'PLLREGIO',
+            'PLLVP25',
+            'PLLDV',
+            'PLLVREG',
+            'PLLGND',
+        ],
+        'POWER_GPIO': [
+            'VDD_GPIOB',
+            'GND_GPIOB',
+        ]}
+    fixedpins = {}
+    function_names = {
+                      'PWM': 'PWM (pulse-width modulation)',
+                      'MSPI0': 'SPI Master 1 (general)',
+                      'MSPI1': 'SPI Master 2 (SDCard)',
+                      'UART0': 'UART (TX/RX) 1',
+                      'SYS': 'System Control',
+                      'GPIO': 'GPIO',
+                      'EINT': 'External Interrupt',
+                      'PWM': 'PWM',
+                      'JTAG': 'JTAG',
+                      'MTWI': 'I2C Master 1',
+                      'SD0': 'SD/MMC 1',
+                      'SDR': 'SDRAM',
+                      'VDD': 'Power',
+                      'VSS': 'GND',
+                      #'LPC1': 'Low Pincount Interface 1',
+                      #'LPC2': 'Low Pincount Interface 2',
+                      }
+
+    ps = PinSpec(pinbanks, fixedpins, function_names)
+
+    ps.sdram1("", ('W', 0), 0, 15, 6, rev=True) # AD4-9, turned round
+    ps.vdd("E", ('W', 6), 0, 0, 1)
+    ps.vss("E", ('W', 7), 0, 0, 1)
+    ps.vdd("I", ('W', 8), 0, 0, 1)
+    ps.vss("I", ('W', 9), 0, 0, 1)
+    ps.sdram1("", ('W', 10), 0, 0, 15, rev=True) # SDRAM DAM0, D0-7, AD0-3
+    ps.mi2c("", ('W', 26), 0, 0, 2)
+    ps.vss("I", ('W', 28), 0, 1, 1)
+    ps.vdd("I", ('W', 29), 0, 1, 1)
+    ps.vss("E", ('W', 30), 0, 1, 1)
+    ps.vdd("E", ('W', 31), 0, 1, 1)
+
+    ps.sdram2("", ('S', 0), 0, 0, 4) # 1st 4, AD10-12,DQM1
+    ps.vdd("E", ('S', 4), 0, 2, 1)
+    ps.vss("E", ('S', 5), 0, 2, 1)
+    ps.vdd("I", ('S', 6), 0, 2, 1)
+    ps.vss("I", ('S', 7), 0, 2, 1)
+    ps.sdram2("", ('S', 8), 0, 4, 8) # D8-15
+    ps.sdram1("", ('S', 16), 0, 21, 9) # clk etc.
+    ps.vss("I", ('S', 22), 0, 3, 1)
+    ps.vdd("I", ('S', 23), 0, 3, 1)
+    ps.vss("E", ('S', 24), 0, 3, 1)
+    ps.vdd("E", ('S', 25), 0, 3, 1)
+    ps.uart("0", ('S', 26), 0)
+    ps.mspi("0", ('S', 28), 0)
+
+    ps.gpio("", ('E', 0), 0, 0, 6) # GPIO 0-5
+    ps.vss("E", ('E', 6), 0, 4, 1)
+    ps.vdd("E", ('E', 7), 0, 4, 1)
+    ps.vdd("I", ('E', 8), 0, 4, 1)
+    ps.vss("I", ('E', 9), 0, 4, 1)
+    ps.gpio("", ('E', 10), 0, 6, 3) # GPIO 6-8
+    ps.jtag("", ('E', 13), 0, 0, 4)
+    ps.gpio("", ('E', 17), 0, 9, 5) # GPIO 9-13
+    ps.vss("I", ('E', 22), 0, 5, 1)
+    ps.vdd("I", ('E', 23), 0, 5, 1)
+    ps.vss("E", ('E', 24), 0, 5, 1)
+    ps.vdd("E", ('E', 25), 0, 5, 1)
+    ps.gpio("", ('E', 26), 0, 14, 2) # GPIO 14-15
+    ps.eint("", ('E', 28), 0, 0, 3)
+    ps.sys("", ('E', 31), 0, 5, 1) # analog VCO out in right top
+
+    ps.vss("E", ('N', 6), 0, 6, 1)
+    ps.vdd("E", ('N', 7), 0, 6, 1)
+    ps.vdd("I", ('N', 8), 0, 6, 1)
+    ps.vss("I", ('N', 9), 0, 6, 1)
+    #ps.pwm("", ('N', 2), 0, 0, 2)  comment out (litex problem 25mar2021)
+    #ps.mspi("1", ('N', 7), 0)       comment out (litex problem 25mar2021)
+    #ps.sdmmc("0", ('N', 11), 0)     # comment out (litex problem 25mar2021)
+    ps.sys("", ('N', 27), 0, 0, 5) # all but analog out in top right
+    ps.vss("I", ('N', 22), 0, 7, 1)
+    ps.vdd("I", ('N', 23), 0, 7, 1)
+    ps.vss("E", ('N', 24), 0, 7, 1)
+    ps.vdd("E", ('N', 25), 0, 7, 1)
+
+    #ps.mquadspi("1", ('S', 0), 0)
+
+    print ("ps clocks", ps.clocks)
+
+    # Scenarios below can be spec'd out as either "find first interface"
+    # by name/number e.g. SPI1, or as "find in bank/mux" which must be
+    # spec'd as "BM:Name" where B is bank (A-F), M is Mux (0-3)
+    # EINT and PWM are grouped together, specially, but may still be spec'd
+    # using "BM:Name".  Pins are removed in-order as listed from
+    # lists (interfaces, EINTs, PWMs) from available pins.
+
+    ls180 = [
+            # 'SD0', litex problem 25mar2021
+            'UART0', 'GPIOS', 'GPIOE', 'JTAG', 'PWM', 'EINT',
+             'VDD', 'VSS', 'SYS',
+                'MTWI', 'MSPI0',
+                # 'MSPI1', litex problem 25mar2021
+                'SDR']
+    ls180_eint = []
+    ls180_pwm = []#['B0:PWM_0']
+    descriptions = {
+        'SD0': 'user-facing: internal (on Card), multiplexed with JTAG\n'
+        'and UART2, for debug purposes',
+        'MTWI': 'I2C.\n',
+        'E2:SD1': '',
+        'MSPI1': '',
+        'UART0': '',
+        'LPC1': '',
+        'SYS': '',
+        'LPC2': '',
+        'SDR': '',
+        'B1:LCD/22': '18-bit RGB/TTL LCD',
+        'ULPI0/8': 'user-facing: internal (on Card), USB-OTG ULPI PHY',
+        'ULPI1': 'dual USB2 Host ULPI PHY'
+    }
+
+    ps.add_scenario("Libre-SOC 2 (NGI Router) 180nm", ls180, ls180_eint,
+                    ls180_pwm, descriptions)
+
+    return ps