From: Fred Fish Date: Wed, 3 Jan 1996 22:00:45 +0000 (+0000) Subject: * symmisc.c (print_objfile_statistics): Print memory use statistics X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=ef4d61874bcff6ef360aebb8e5086840e478ef80;p=binutils-gdb.git * symmisc.c (print_objfile_statistics): Print memory use statistics for objfile psymbol, symbol, and type obstacks. Update copyright to 1996. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 511416c0913..e0a83cc7e50 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,5195 +1,18 @@ -Fri Dec 29 16:30:58 1995 Stan Shebs +Wed Jan 3 13:09:04 1996 Fred Fish - * symfile.c (find_sym_fns): Add PowerMac to xcoff file recognition - kludge. + * symmisc.c (print_objfile_statistics): Print memory use statistics + for objfile psymbol, symbol, and type obstacks. + Update copyright to 1996. -start-sanitize-gdbtk -Thu Dec 28 15:10:49 1995 Stan Shebs +Tue Jan 2 13:41:14 1996 Stan Shebs - * README.GDBTK: Polish introductory paragraph. -end-sanitize-gdbtk + * config/mips/nm-irix5.h: Restore. + (TARGET_HAS_HARDWARE_WATCHPOINTS, etc): Define as for Irix 4; + from Lee Iverson . + * config/mips/irix5.mh (NAT_FILE): Use nm-irix5.h. + * config/mips/irix[345].mh (MUNCH_DEFINE): Remove. -Fri Dec 22 11:05:59 1995 Michael Meissner - - * configure.in (gdb_host): Add support for DG/UX running on x86 as - a host. - (all x86 targets and hosts): Add support for pentium-pro machines. - - * configure: Rebuild. - - * config/i386/i386dgux.mh: New file for DG/UX running on x86 host. - -Thu Dec 21 19:09:20 1995 Rob Savoye - - * remote-array.c (array_wait): Poll the keyboard along with the - serial port so users can tpye at the target while their - application is running. - -Thu Dec 21 11:58:52 1995 Michael Meissner - - * Makefile.in (ppcbug-rom.o, srec.o): Add dependencies. - - * monitor.c (monitor_debug): Take prefix, and suffix arguments. - Print trailing newline after the suffix. - (monitor_printf{,_noecho}): Change monitor_debug calls. - (monitor_printf): Call monitor_expect instead of trying to do the - expect processing locally so that if there is extra junk, it - doesn't hang things up. - (readchar): If MO_HANDLE_NL is set, handle \r\n pairs and convert - them to a single \r. Use monitor_debug to print out byte read. - - * monitor.h (MO_HANDLE_NL): Add new flag. - - * ppcbug-rom.c (ppcbug_ops{1,2}): Split into two ops, one that - uses lo 0 to load, and the other that uses lo 1. Set flag - MO_HANDLE_NL. - (ppcbug_open{0,1}): Clone and split to handle ppcbug_ops{1,2}. - (_initialize_ppcbug_rom): Set up both ppcbug_open{0,1}. - -Wed Dec 20 10:54:41 1995 Fred Fish - - * defs.h: Delete extraneous whitespace at end of file. - * symfile.h: Move #include of demangle.h outside conditional. - * objfiles.h (struct objstats, OBJSTAT, OBJSTATS): New struct and - macros to hold per-objfile statistics for internal - instrumentation. - (struct objfile): Add OBJSTATS member, which is optional. - * buildsym.h (next_symbol_text_func): Now takes objfile argument. - Also update copyright to 1995. - * dbxread.c (dbx_next_symbol_text): Now takes objfile argument. - (dbx_symfile_init, coffstab_build_psymtabs, elfstab_build_psymtabs, - stabsect_build_psymtabs): Accumulate string table size. - (dbx_next_symbol_text, read_dbx_symtab, read_ofile_symtab): - Accumulate number of stabs symbols read. - * dwarfread.c (new_symbol, symthesize_typedef): - Accumulate number of full symbols created. - * gdbtypes.c (alloc_type): Accumulate number of types. - * maint.c (maintenance_print_statistics): New function. - * mdebugread.c (mdebug_next_symbol_text): Now takes objfile - argument. - * minsyms.c (prim_record_minimal_symbol_and_info): Accumulate - number of minimal symbols read. - * os9kread.c (read_os9k_psymtab): next_symbol_text takes objfile - arg. - * partial-stab.h: next_symbol_text takes objfile arg. - * stabsread.c (error_type, STABS_CONTINUE): Now takes objfile arg - and uses it to call next_symbol_text. - * symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list): - Accumulate number of partial symbols created. - * symfile.h (ADD_PSYMBOL_VT_TO_LIST): Accumulate number of partial - symbols created. - * symmisc.c (print_objfile_statistics): Print the per-objfile - internal instrumentation statistics gathered. - * xcoffread.c (xcoff_next_symbol_text): Now takes objfile argument. - -Fri Dec 15 16:15:55 1995 Ian Lance Taylor - - * top.c (set_endian_from_file): Use new bfd_big_endian macro. - -Fri Dec 15 12:21:10 1995 Raymond Jou - - * mpw-make.sed: Add quotes to RIncludes reference. - -Fri Dec 15 13:18:55 1995 Rob Savoye - - * remote-array.c: Remove bogus setting of baudrate to 4800. Their - hardware has real UARTS now. - -Mon Dec 11 18:19:16 1995 Stan Shebs - - * configure.in (powerpc-*-macos*): New target configuration. - * configure: Update. - * config/powerpc/macos.mh, config/powerpc/macos.mt, - config/powerpc/nm-macos.h, config/powerpc/tm-macos.h, mac-nat.c: - New files, native PowerMac debugging support. - * Makefile.in (mac-nat.o): Add build rule. - * mpw-config.in (enable_cflags): Add support. - (m68k-apple-macos, powerpc-apple-macos): Fix natdepfiles to - list object file instead of source file. - * mpw-make.sed (@ENABLE_CFLAGS@): Don't edit out, replace with - value of variable. - (install, install-only): Edit MPW-specific installation into - place of Unix shell code. - * mac-gdb.r: Fix version resources to use symbolic version strings. - (cfrg): New resource, code fragment for PowerMac. - -start-sanitize-gm - mpw-config.in (mips-gm-magic): New configuration. -end-sanitize-gm - -Mon Dec 11 14:13:03 1995 Fred Fish - - * dbxread.c (process_one_symbol): When looking at the next - minimal symbol, check for end of the minimal symbol array - (symbol with NULL pointer for name) before dereferencing it. - -Mon Dec 11 15:56:55 1995 Per Bothner - - * eval.c (evaluate_struct_tuple): Fix thinko. - -Mon Dec 11 06:52:02 1995 Wilfried Moser (Alcatel) - - * ch-typeprint.c (chill_type_print_base): Slightly change of printing - of variant structures. - -Mon Dec 11 00:36:01 1995 Per Bothner - - * valops.c (value_cast): Handle casts to and from TYPE_CODE_CHAR. - * ch-exp.c (match_integer_literal): Fix long long support. - * gdbtypes.c (get_discrete_bounds): Make TYPE_LENGTH (type) == - sizeof (LONGEST) case work OK. - -Fri Dec 8 21:02:24 1995 Fred Fish - - * coffread.c, dbxread.c, dstread.c, objfiles.c, os9kread.c, - symfile.c, symtab.c: Use "obstack.h" rather than . - -Wed Dec 6 16:16:18 1995 Stu Grossman (grossman@cirdan.cygnus.com) - - * remote-mips.c (mips_receive_header): Allow mips_syn_garbage to be - user-settable (via set syn-garbage-limit). Setting it to -1 makes - it unlimited. - -Tue Dec 5 18:33:43 1995 Brendan Kehoe - - * gdbtypes.c (check_stub_method): Make sure we get back a function - string in the demangled name before we try to use it. - -Tue Dec 5 18:08:29 1995 Stu Grossman (grossman@cygnus.com) - - * monitor.c (monitor_expect_regexp): Make static, add prototype. - * (monitor_read_memory_single): Call monitor_expect_regexp with - pointer to getmem_resp_delim_pattern, not entire struct. - -Tue Dec 5 15:51:25 1995 Stan Shebs - - * c-lang.h (c_op_print_tab): Don't declare, some compilers - consider illegal if structure not defined, and only used - in c-lang.c anyway. - -Sun Dec 3 12:31:03 1995 Per Bothner - - * eval.c (evaluate_subexp_standard case): Fix typo. - -Sun Dec 3 11:59:21 1995 Jeffrey A. Law - - * ch-exp.c (parse_named_record_element): Avoid aggregrate - initializations for automatic variables. - - * hppa-tdep.c (hppa_alignof): Fix typo in last change. - -Sat Dec 2 19:32:57 1995 Fred Fish - - * symfile.c (global_psymbols, static_psymbols): Remove, unused. - -Sat Dec 2 03:02:21 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * alpha-tdep.c (heuristic_proc_desc): Add heuristic to - determine the return address register, needed for OSF/1-3.2C. - * config/alpha/tm-alpha.h (T7_REGNUM, T9_REGNUM): Define. - -Fri Dec 1 07:23:57 1995 Michael Meissner - - * ppcbug-rom.c (ppcbug_cmds): Turn on MO_GETMEM_READ_SINGLE - because PPCbug displays the memory as characters as well as hex. - Fix getmem/setmem commands. - - * srec.c (load_srec): Fix off by one typo in last submission. - - * rs6000-tdep.c (push_arguments): Fix typo. - -Thu Nov 30 23:54:17 1995 Per Bothner - - * language.c (lang_bool_type), language.h: New function. - * language.h (LA_BOOL_TYPE): New macro. - * eval.c (evaluate_subexp_standard) Use LA_BOOL_TYPE instead - of builtin_type_int where appropriate, - * valarith.c (value_subscript): Likewise. - - * valops.c (value_slice): Implement (value) bitstring slices. - * valprint.c (val_print): If TYPE_LENGTH is zero, don't automatically - print "" - Chill has zero-length (string) types. - - * gdbtypes.c (check_stub_type): Removed; no longes needed. - * ch-exp.c (expect, parse_call): Tweak error messages. - -Wed Nov 29 13:35:18 1995 Per Bothner - - * scm-valprint.c (scm_isymnames): Remove "#@" prefix. - (scm_scmval_print): Do not print "#@" prefix. - - * gdbtypes.h (enum type_code): Added TYPE_CODE_TYPEDEF. - (check_typedef): New prototype. - (CHECK_TYPEDEF): New macro. - (TYPE_DUMMY_RANGE): Removed. - * gdbtypes.c (get_discrete_bounds): Fix paren error; make more robust. - (create_array_type): Don't force_to_range_type; users of the - array are responsible for handling non-range index types. - (create_set_type): Likewise. - (force_to_range_type): Removed. - (check_typedef): New function handles stub types and typedefs. - (check_stub_type): Just call check_typedef. (To be removed.) - (recursive_dump_type): Handle TYPE_CODE_TYPEDEF. - * ch-lang.c (type_lower_upper): Use get_discrete_bounds. - (evaluate_subexp_chill): Handle string repetition. - Re-arrange to handle EVAL_AVOID_SIDE_EFFECTS better. - * ch-typeprint.c (chill_type_print_base): Handle TYPE_CODE_TYPEDEF. - Pass show=0 in recursive calls various places. - (case TYPE_CODE_ARRAY): Don't require index type to have - TYPE_CODE_RANGE. - (case TYPE_CODE_RANGE): Don't need to support TYPE_DUMMY_RANGE. - * gdbtypes.c, ch-lang.c, ch-typeprint.c (numerous places): - Add check_typedef/CHECK_TYPEDEF as needed. - - * ch-exp.y: Replaced by ... - * ch-exp.c: New file. Use recursive-descent. - Recognize labelled array tuples and powerset ranges. - * Makefile.in: Update for no longer using yacc for ch-exp. - - * c-lang.c: Make various functions non-static. - * c-lang.h: Add bunches of prototypes. - * cp-valprint.c (cp_print_value_fields): Also take address. - (cp_print_value): Likewise. Use baselcass_offset. - * stabsread.c (current_symbol): New static variable. - (type_synonym_name): Remove. - (read_type): If copying, make copy be a TYPE_CODE_TYPEDEF. - (read_array_type): Don't need to handle undefined element type here. - (cleanup_undefined_types): Ditto. - (read_range_type): Look for Chill ranges. - * valops.c (value_assign): Fix case lval_internalvar - don't try - to assign into old value (which might be too small!). - (value_coerce_array): No longer need special VALUE_REPEATED handling. - (value_arg_coerce): Cleaner array->pointer decay mechanism. - (search_struct_field): Use baseclass_offset rather than - baseclass_addr. - (value_slice): Use get_discrete_bounds. - * value.h (COERCE_VARYING_ARRAY): Take type argumnt as well. - * values.c (baseclass_offset): Change parameter interface. - (baseclass_addr): Removed. - * c-typeprint.c, c-valprint.c, ch-valprint.c, values.c, valops.c: - Add check_typedef/CHECK_TYPEDEF as needed. - - * alpha-tdep.c, c-exp.y, h8500-tdep.c, f-exp.y, f-valprint.c, - findvar.c, hppa-tdep.c, infcmd.c, language.c, printcmd.c, - rs6000-tdep.c, symmisc.c, symtab.c, mdebugread.c: - Add check_typedef/CHECK_TYPEDEF as needed. - - * f-typeprint.c, valarith.c, valprint.c, typeprint.c, eval.c: - Add check_typedef/CHECK_TYPEDEF as needed. - * f-typeprint.c: Various cleaning up. - * valarith.c (value_subscript): Also subscript bitstrings (for Chill). - * typeprint.c (print_type_scalar): Also support TYPE_CODE_RANGE. - * eval.c (evaluate_subexp_standard case OP_ARRAY): Implement - support for labelled array tuples and ranges in powerset tuples. - (init_array_element): New function. - - * top.c (command_line_input): Only strip out an initial #-comment. - Looking for internal comments is language-specific (breaks Scheme). - - * expression.h (enum exp_opcode): Add BINOP_RANGE. - * expprint.c (dump_expression): Support BINOP_RANGE. - * eval.c (evaluate_subexp_standard): Handle BINOP_RANGE (as error). - (case MULTI_SUBSCRIPT): Fix broken f77 value->int ad hoc conversion. - * ch-lang.c (chill_op_print_tab): Support BINOP_RANGE. - (evaluate_subexp_chill): Error on BINOP_COMMA. - - * Makefile.in: Clean up so doc stuff stays in doc sub-dir. - -Wed Nov 29 16:39:50 1995 Michael Meissner - - * monitor.c (monitor_debug): New function to print monitor debug - output in printable fashion. - (monitor_printf{,_noecho}): Call monitor_debug instead of - fputs_unfiltered. - - * srec.c (load_srec): When printing srec debug information, do not - print the carriage return directly, instead print \\r followed by - a newline. - -Tue Nov 28 15:25:28 1995 Doug Evans - - * Makefile.in (target_subdir): Define. - (CC_FOR_TARGET, CXX_FOR_TARGET): Use it to find target libraries. - * configure.in (X_CFLAGS): Fix typo. - (target_subdir): Set to "${target_alias}/" if cross. - * configure: Regenerated. - - * dbxread.c (dbx_symfile_read): Set block_address_function_relative - for `pe' format files. - -Tue Nov 28 11:17:47 1995 Fred Fish - - * magic.h: Renamed to gmagic.h to avoid conflict. - * magic.c: Renamed to gmagic.c in sympathy. - * eval.c, gmagic.c, config/tm-magic.h: - Include "gmagic.h" rather than "magic.h". - -Sat Nov 25 02:56:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * mdebugread.c (handle_psymbol_enumerators, parse_symbol): - Recognize enums from alpha cc -migrate. - (upgrade_type): Pass correct fd to parse_symbol when parsing - the index type of an array. - (parse_procedure, parse_lines, psymtab_to_symtab_1): Handle - unsorted procedure descriptors from Irix 5.x and Alpha OSF/1-3.x - shared libraries. Use CORE_ADDR instead of `unsigned long' in - procedure descriptor address computations. - - * symtab.c (decode_line_1): Prevent accidental strchr match - of a null character with the terminating null character of - gdb_completer_quote_characters. - (cplusplus_hint): Make sure that only a single quote is printed - in the hint message. - -Fri Nov 24 16:17:01 1995 Jeffrey A Law (law@cygnus.com) - - * top.c (recurse_read_control_structure): Don't make cleanups - here. Callers handle that correctly. - -Tue Nov 21 15:16:34 1995 Fred Fish - - * config/m68k/xm-hp300hpux.h: Define MMAP_BASE_ADDRESS and MMAP_INCREMENT. - Also force HAVE_MMAP to be defined since autoconf is currently broken - for detecting a working mmap under hpux. - * config/pa/xm-hppah.h (MMAP_BASE_ADDRESS): Tweak MMAP_BASE_ADDRESS - to a better value suggested by Jeffrey A Law (law@cygnus.com). - -Tue Nov 21 08:48:58 1995 Fred Fish - - * config/pa/xm-hppah.h: Define MMAP_BASE_ADDRESS and MMAP_INCREMENT. - Also force HAVE_MMAP to be defined since autoconf is currently broken - for detecting a working mmap under hpux. - * objfiles.c (map_to_address): Have gdb print a warning when it - is compiled with HAVE_MMAP but without both MMAP_BASE_ADDRESS and - MMAP_INCREMENT defined (thus making it appear mmap doesn't work). - -Mon Nov 20 14:13:53 1995 Stu Grossman (grossman@cygnus.com) - - * infrun.c (wait_for_inferior): Add support for dynamic function - trampolines. These are pieces of code between the caller and the - callee that figure out the address of the callee's code at run - time. Upon entry, we can't figure out the callee's address, so we - set a breakpoint within the trampoline where the address will be - known, and continue the target. Once we hit the breakpoint, we - break at the callee's address and proceed as usual. -start-sanitize-gm - * config/tm-magic.h: Define DYNAMIC_TRAMPOLINE_NEXTPC. Turn off - IN_SOLIB_CALL_TRAMPOLINE and IN_SOLIB_RETURN_TRAMPOLINE. -end-sanitize-gm - -Mon Nov 20 11:12:34 1995 Fred Fish - - * objfiles.c (allocate_objfile): Change warning message about mapped - symbol tables so that it is obvious that they are not supported on - this particular machine rather than implying they are not supported - at all in this version of gdb. - -Sun Nov 19 05:20:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * irix5-nat.c, osfsolib.c (solib_address): Return the name of the - containing solib. - * stack.c (print_frame_info): Use minimal symbol only if - fi->pc is in a known section. - -Sat Nov 18 11:19:35 1995 Roland McGrath - - * solib.c (solib_address): Return the name of the containing solib. - * solib.h (PC_SOLIB): New macro; define using solib_address. - * stack.c (print_frame_info) [PC_SOLIB]: If no function name, try - PC_SOLIB on the PC value. - -Sat Nov 18 04:09:31 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * annotate.c (annotate_source, annotate_frame_begin): Issue - `0x' prefix for the pc value, to remain consistent with previous - GDB versions. - - * blockframe.c (find_pc_partial_function), config/pa/tm-hppa.h: - Remove Sun shared library transfer hack and - INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK, it is obsoleted by the - mst_solib_trampoline minimal symbols. - - * blockframe.c (inside_main_func): Check main_func_*pc against - INVALID_ENTRY_*PC, not zero. - * symfile.c (init_entry_point_info): Initialize ei.*pc with - INVALID_ENTRY_*PC. - * mipsread.c (mipscoff_symfile_read): If the entry_file bounds - are still unknown after processing the partial symbols, then try - to set them from the minimal symbols. - - * infcmd.c (registers_info): Error out if selected_frame is NULL. - * stack.c (return_command): Select new current frame silently if - not interactive. - - * mipsread.c (read_alphacoff_dynamic_symtab): Ignore additional - DT_MIPS_LOCAL_GOTNO and DT_MIPS_GOTSYM entries. - - * irix5-nat.c (solib_create_inferior_hook): Call solib_add only - if auto_solib_add_at_startup is nonzero. - (_initialize_solib): Add "set auto-solib-add" command. - * osfsolib.c (solib_create_inferior_hook): Call solib_add only - if auto_solib_add_at_startup is nonzero. - (_initialize_solib): Add "set auto-solib-add" command. - -Wed Nov 15 17:12:04 1995 Stan Shebs - - * utils.c: Don't include sys/ioctl.h etc if MPW is host. - -Tue Nov 14 17:16:46 1995 Doug Evans - - * config/arm/tm-arm.h (ADDITIONAL_REGISTER_NAMES): Fix r5. - (FRAME_SAVED_PC): Minor clean up. - -Tue Nov 14 14:51:05 1995 Stu Grossman (grossman@cygnus.com) - - * monitor.c (monitor_load_srec monitor_make_srec): Move all - S-record download code into srec.c. - * srec.c srec.h: New files. Contain S-record loading routines - formerly in monitor.c. - * serial.c serial.h: New routine just like fprintf, but uses - serial_t instead of FILE *. - * sh-tdep.c (frame_find_saved_regs init_extra_frame_info): - Don't add four to saved pc (makes things match manual). Also, fix - bug where we didn't get pc from stack frame correctly. - * config/sh/tm-sh.h (SAVED_PC_AFTER_CALL): Don't add four to - saved pc. Real hardware does this for you. - * sh3-rom.c (sh3_load): New routine. Sets up for download then - calls generic S-record loader. - * config/h8300/h8300.mt, config/h8500/h8500.mt, - config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt: - Add srec.o to TDEPFILES. - -Tue Nov 14 15:57:36 1995 Michael Meissner - - * ppcbug-rom.c: New file to support the Motorola PPCBUG monitor - for PowerPC's. - - * config/powerpc/ppc{,le}-{eabi,sim}.mt (TDEPFILES): Include - ppcbug-rom.o, monitor.o, and srec.o - - * config/i386/linux.mt (XDEPFILES): Include ser-tcp.o. - -Mon Nov 13 13:12:46 1995 Jeffrey A Law (law@cygnus.com) - - * partial-stab.h: Remove GDB_TARGET_IS_HPPA kludge. - -Fri Nov 10 13:08:54 1995 Jeff Law (law@kahlua.cs.utah.edu) - - * terminal.h (HAVE_SGTTY): Fix typo. - -Thu Nov 9 17:34:01 1995 Michael Meissner - - * configure.in (gdb_target): Build in the simulator for all - PowerPC eabi targets, not just eabisim, providing - --enable-sim-powerpc is used, or the host compiler is GCC. - -Thu Nov 9 14:04:05 1995 Raymond Jou (rjou@mexican.cygnus.com) - - * mpw-config.in: Add variable with names of SIOW libraries. - * mpw-make.sed: Add an action to build SIOWgdb. - -Wed Nov 8 19:25:22 1995 Stan Shebs - - * mpw-make.sed: Edit @ENABLE_CFLAGS@ out, mpw-configure can - add back in if necessary. - -Wed Nov 8 15:59:52 1995 James G. Smith - - * config/mips/vr4300.mt: Added simulator to default VR4300 build. - -Tue Nov 7 16:02:25 1995 Stu Grossman (grossman@cygnus.com) - - * remote-mips.c (mips_initialize): Fix brain damage found by - Jamie. Basically had case statement in the wrong place... - * (mips_load): Remove unnecessary `db tty0' command. It's all - handled by mips_initialize now. - -Tue Nov 7 12:59:14 1995 Raymond Jou - - * mac-gdb.r: Added #ifdef Macgdb. - -Tue Nov 7 14:59:51 1995 James G. Smith - - * remote-mips.c (mips_initialize): Updated to talk to VR4300 RISQ - monitor board. - -Mon Nov 6 11:44:11 1995 James G. Smith - - * config/mips/{tm-vr4300.h tm-vr4300el.h} (TARGET_MONITOR_PROMPT): - Change into real strings. - - * remote-sim.c (gdbsim_open): Moved sim_open() call to after - callback initialisation. - -Sun Nov 5 00:07:52 1995 Jason Molenda (crash@phydeaux.cygnus.com) - - * configure.in (AC_CHECK_HEADERS): add stddef.h. - -Fri Nov 3 12:30:43 1995 Fred Fish - - * Makefile.in (COMMON_OBS): Use corefile.o rather than core.o - * core.c: Rename to corefile.c. - * config/pyr/tm-pyr.h, umax-xdep.c, sun386-nat.c, pyr-xdep.c, - Makefile.in (SFILES), gould-xdep.c, coredep.c, armtdep.c, - arm-xdep.c, altos-xdep.c: Change core.c references to corefile.c. - - From Graham Stoney . - * Makefile.in (remote-array.o): Add rule to build. - (ALLDEPFILES): Add remote-array.c - * remote-array.c (baud_rate): Remove unnecessary declaration. - (baudrate): Remove. - (array_files_info): Print global baud_rate not baudrate. - -Sat Nov 4 10:21:58 1995 Stu Grossman (grossman@cygnus.com) - - * Makefile.in (INTERNAL_CFLAGS): Add ENABLE_CFLAGS. - * fork-child.c (fork_inferior): Add call to - TARGET_CREATE_INFERIOR_HOOK to allow target specific code to get - control just before the new process executes it's first instruction. - * remote-mips.c (mips_initialize): Cleanup a bit. Don't try to - receive a packet at first. This speeds up initialization a lot. - Use TARGET_MONITOR_PROMPT instead of "". - (common_breakpoint): Use rresponse instead of rerrflg to inspect - error code. - * symfile.c (syms_from_objfile reread_symbols): Call - TARGET_SYMFILE_POSTREAD to allow target specific code to get - control after reading new symbols. - * target.h: New macros TARGET_SYMFILE_POSTREAD, and - TARGET_CREATE_INFERIOR_HOOK. See above for descriptions. - * config/mips/{irix5.mh nm-irix5.h}: Delete nm-irix5.h. Make - NAT_FILE point directly at ../nm-sysv4.h. - * config/mips/{mipsm3.mh nm-m3.h}: Delete nm-m3.h. Make - NAT_FILE point directly at ../nm-m3.h. - * config/mips/{mipsv4.mh nm-sysv4.h}: Delete nm-sysv4.h. Make - NAT_FILE point directly at ../nm-sysv4.h. - * config/mips/nm-mips.h: Improve comment at top of file. - * config/mips/tm-mips.h (TARGET_MONITOR_PROMPT): Change - definition into a proper string. -start-sanitize-gm - * configure configure.in: Add support for --enable-gm. - (mips*-*-magic*): Change target from magic to idt. - * eval.c expprint.c expression.h parse.c remote-mips.c utils.c: - Change GENERAL_MAGIC_HACKS to GENERAL_MAGIC. - * magic.c magic.h: Update files from GM. - * config/mips/magic.mt: Delete. No longer necessary now that we - use --enable mechanism. - * config/mips/tm-idt.h: Add GM stuff needed for remote GM box. - * config/mips/tm-irix5.h: Add GM stuff needed for native Irix box. - * config/mips/tm-magic.h: Move up to config/tm-magic.h. Move all - platform specific stuff into tm-irix.h and tm-idt.h. Add defs for - TARGET_SYMFILE_POSTREAD and TARGET_CREATE_INFERIOR_HOOK. -end-sanitize-gm - -Wed Nov 1 20:18:08 1995 Fred Fish - - * config/i386/tm-i386.h: New file containing generic i*86 target - definitions. - (TARGET_BYTE_ORDER): Moved here from tm-i386v.h. - (IEEE_FLOAT): Moved here from tm-i386v.h. - (START_INFERIOR_TRAPS_EXPECTED): Define default as 2. - (FUNCTION_START_OFFSET): Moved here from tm-i386v.h. - (SKIP_PROLOGUE): Moved here from tm-i386v.h. - (SAVED_PC_AFTER_CALL): Moved here from tm-i386v.h. - (INNER_THAN): Moved here from tm-i386v.h. - (BREAKPOINT): Moved here from tm-i386v.h. - (DECR_PC_AFTER_BREAK): Moved here from tm-i386v.h. - (ABOUT_TO_RETURN): Moved here from tm-i386v.h. - (REGISTER_SIZE): Moved here from tm-i386v.h. - (NUM_REGS): Moved here from tm-i386v.h. - (REGISTER_NAMES): Moved here from tm-i386v.h. - (EXTRACT_STRUCT_VALUE_ADDRESS): Moved here from tm-i386v.h. - (FP_REGNUM): Moved here from tm-i386v.h. - (SP_REGNUM): Moved here from tm-i386v.h. - (PC_REGNUM): Moved here from tm-i386v.h. - (PS_REGNUM): Moved here from tm-i386v.h. - (FP0_REGNUM): Moved here from tm-i386aix.h. - (FPC_REGNUM): Moved here from tm-sun386.h. - (REGISTER_BYTES): Moved here from tm-i386aix.h. - (REGISTER_BYTE): Moved here from tm-i386aix.h. - (REGISTER_RAW_SIZE): Moved here from tm-i386aix.h. - (MAX_REGISTER_RAW_SIZE): Moved here from tm-i386aix.h. - (REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h. - (MAX_REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h. - (EXTRACT_RETURN_VALUE): Moved here from tm-i386aix.h. - (STORE_RETURN_VALUE): Moved here from tm-i386aix.h. - (REGISTER_VIRTUAL_TYPE): Moved here from tm-i386v.h. - (STORE_STRUCT_RETURN): Moved here from tm-i386v.h. - (FRAME_CHAIN): Moved here from tm-i386v4.h. - (FRAMELESS_FUNCTION_INVOCATION): Moved here from tm-i386v4.h. - (FRAME_SAVED_PC): Moved here from tm-i386os9k.h - (FRAME_ARGS_ADDRESS): Moved here from tm-i386v.h. - (FRAME_LOCALS_ADDRESS): Moved here from tm-i386v.h. - (FRAME_NUM_ARGS): Moved here from tm-i386sun.h. - (FRAME_ARGS_SKIP): Moved here from tm-i386v.h. - (FRAME_FIND_SAVED_REGS): Moved here from tm-i386v.h. - (PUSH_DUMMY_FRAME): Moved here from tm-i386v.h. - (POP_FRAME): Moved here from tm-i386v.h. - (CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET, - CALL_DUMMY_BREAKPOINT_OFFSET, FIX_CALL_DUMMY): Moved here from - tm-i386v.h - (print_387_control_word, print_387_status_word): Declare prototypes. - (struct frame_info, struct frame_saved_regs): Forward decls for - prototypes. - (SP_ARG0): Moved here from tm-i386v.h. - - * config/i386/tm-i386v.h: - (i386/tm-i386.h): Include. - (TARGET_BYTE_ORDER): Remove. - (IEEE_FLOAT): Remove. - (START_INFERIOR_TRAPS_EXPECTED): Undef before redefine to 4. - (FUNCTION_START_OFFSET): Remove. - (SKIP_PROLOGUE): Remove. - (i386_skip_prologue): Remove prototype. - (SAVED_PC_AFTER_CALL): Remove. - (INNER_THAN): Remove. - (BREAKPOINT): Remove. - (DECR_PC_AFTER_BREAK): Remove. - (ABOUT_TO_RETURN): Remove. - (REGISTER_SIZE): Remove. - (NUM_REGS): Undef before redefine to 16 (no FP support). - (REGISTER_NAMES): Undef before redefine. - (FP_REGNUM, SP_REGNUM, PC_REGNUM, PS_REGNUM): Remove. - (REGISTER_BYTES): Undef before redefine. - (REGISTER_BYTE): Undef before redefine. - (REGISTER_RAW_SIZE): Undef before redefine. - (REGISTER_VIRTUAL_SIZE): Undef before redefine. - (MAX_REGISTER_RAW_SIZE): Undef before redefine. - (MAX_REGISTER_VIRTUAL_SIZE): Undef before redefine. - (REGISTER_VIRTUAL_TYPE): Undef before redefine. - (STORE_STRUCT_RETURN): Undef before redefine. - (EXTRACT_RETURN_VALUE): Undef before redefine. - (STORE_RETURN_VALUE): Undef before redefine. - (EXTRACT_STRUCT_VALUE_ADDRESS): Remove. - (FRAME_CHAIN): Undef before redefine. - (FRAMELESS_FUNCTION_INVOCATION): Undef before redefine. - (FRAME_SAVED_PC): Undef before redefine. - (FRAME_ARGS_ADDRESS): Remove. - (FRAME_LOCALS_ADDRESS): Remove. - (FRAME_NUM_ARGS): Undef before redefine. - (FRAME_ARGS_SKIP): Remove. - (FRAME_FIND_SAVED_REGS): Remove. - (PUSH_DUMMY_FRAME): Remove. - (POP_FRAME): Remove. - (CALL_DUMMY): Remove. - (CALL_DUMMY_LENGTH): Remove. - (CALL_DUMMY_START_OFFSET): Remove. - (CALL_DUMMY_BREAKPOINT_OFFSET): Remove - (FIX_CALL_DUMMY): Remove. - (print_387_control_word): Remove. - (print_387_status_word): Remove. - (SP_ARG0): Remove. - - * config/i386/tm-symmetry.h: - (TM_SYMMETRY_H): Enclose file in test for define & define if needed. - (START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of - tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2. - (DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h - or tm-i386v.h, #undef, and #define to 0. - (MAX_REGISTER_RAW_SIZE): Remove. - (FRAME_CHAIN): Remove. - (FRAMELESS_FUNCTION_INVOCATION): Remove. - (FRAME_SAVED_PC): Remove. - (print_387_control_word, print_387_status_word): Remove prototypes. - - * config/i386/tm-ptx.h: - (TM_PTX_H): Enclose file in test for define & define if needed. - (START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of - tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2. - (DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h - or tm-i386v.h, #undef, and #define to 0. - (SDB_REG_TO_REGNUM): Remove obsolete commented out define. - (print_387_control_word, print_387_status_word): Remove prototypes. - - * config/i386/tm-linux.h: - (TM_LINUX_H): Enclose file in test for define & define if needed. - (i386/tm-i386.h): Include instead of tm-i386v.h. - (START_INFERIOR_TRAPS_EXPECTED): Remove. - - * config/i386/tm-i386v4.h: - (TM_I386V4_H): Enclose file in test for define & define if needed. - (i386/tm-i386.h): Include instead of tm-i386v.h. - (START_INFERIOR_TRAPS_EXPECTED): Remove. - (FRAME_CHAIN): Moved to tm-i386.h. - (FRAMELESS_FUNCTION_INVOCATION): Moved to tm-i386.h. - (FRAME_SAVED_PC): Remove. - (sigtramp_saved_pc): Define as i386v4_sigtramp_saved_pc. - (FRAME_NUM_ARGS): Remove. - - * config/i386/tm-i386os9k.h: - (TM_I386OS9K_H): Enclose file in test for define & define if needed. - (i386/tm-i386.h): Include instead of tm-i386v.h. - (START_INFERIOR_TRAPS_EXPECTED): Remove. - (NUM_REGS): Undefine before redefining. - (FRAME_CHAIN): Remove. - (FRAMELESS_FUNCTION_INVOCATION): Remove. - (FRAME_SAVED_PC): Move to tm-i386.h. - - * config/i386/tm-i386nw.h: - (TM_I386NW_H): Enclose file in test for define & define if needed. - (i386/tm-i386.h): Include instead of tm-i386v.h. - (START_INFERIOR_TRAPS_EXPECTED): Remove. - - * config/i386/tm-i386bsd.h: - (TM_I386BSD_H): Enclose file in test for define & define if needed. - (i386/tm-i386.h): Include instead of tm-i386v.h. - (START_INFERIOR_TRAPS_EXPECTED): Remove. - (FRAMELESS_FUNCTION_INVOCATION): Remove. - (FRAME_SAVED_PC): Remove. - - * config/i386/tm-i386aix.h: - (i386/tm-i386.h): Include instead of tm-i386v.h. - (START_INFERIOR_TRAPS_EXPECTED): Remove. - (FP_REGNUM): Remove. - (SP_REGNUM): Remove. - (PC_REGNUM): Remove. - (PS_REGNUM): Remove. - (FP0_REGNUM): Moved to tm-i386.h. - (NUM_REGS): Remove. - (REGISTER_NAMES): Remove. - (REGISTER_BYTES): Moved to tm-i386.h. - (REGISTER_BYTE): Moved to tm-i386.h. - (REGISTER_RAW_SIZE): Moved to tm-i386.h. - (MAX_REGISTER_RAW_SIZE): Moved to tm-i386.h. - (REGISTER_VIRTUAL_SIZE): Moved to tm-i386.h. - (REGISTER_VIRTUAL_TYPE): Removed. - (EXTRACT_RETURN_VALUE): Moved to tm-i386.h. - (STORE_RETURN_VALUE): Moved to tm-i386.h. - - * config/i386/tm-sun386.h: - (TM_SUN386_H): Enclose file in test for define & define if needed. - (i386/tm-i386.h): Include. - (TARGET_BYTE_ORDER): Remove. - (FUNCTION_START_OFFSET): Remove. - (SKIP_PROLOGUE): Remove. - (SAVED_PC_AFTER_CALL): Remove. - (INNER_THAN): Remove. - (BREAKPOINT): Remove. - (DECR_PC_AFTER_BREAK): Remove. - (ABOUT_TO_RETURN): Remove. - (REGISTER_SIZE): Remove. - (NUM_REGS): Undefine before defining. - (REGISTER_NAMES): Undefine before redefining. - (REGISTER_BYTES): Undefine before redefining. - (REGISTER_BYTE): Undefine before defining. - (FP_REGNUM): Undefine before defining. - (PC_REGNUM): Undefine before defining. - (FPC_REGNUM): Undefine before defining. - (REGISTER_RAW_SIZE): Undefine before defining. - (FRAME_CHAIN): Undefine before defining. - (FRAMELESS_FUNCTION_INVOCATION): Undefine before defining. - (FRAME_SAVED_PC): Undefine before defining. - (FRAME_NUM_ARGS): Moved to tm-i386.h. - (MAX_REGISTER_RAW_SIZE): Remove. - (MAX_REGISTER_VIRTUAL_SIZE): Remove. - (STORE_STRUCT_RETURN): Remove. - (EXTRACT_STRUCT_VALUE_ADDRESS): Remove. - (FRAME_ARGS_ADDRESS): Remove. - (FRAME_LOCALS_ADDRESS): Remove. - (FRAME_NUM_ARGS): Undefine before defining. - (FRAME_ARGS_SKIP): Remove. - (FRAME_FIND_SAVED_REGS): Remove. - (PUSH_DUMMY_FRAME): Remove. - (POP_FRAME): Remove. - (CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET): Remove. - (struct frame_info, struct frame_saved_regs): Remove forward decls - for prototypes. - - * config/i386/tm-i386lynx.h (i386/tm-i386.h): Include instead of - tm-i386v.h. - * config/i386/tm-i386m3.h (i386/tm-i386.h): Include instead of - tm-i386v.h. - - * i386-tdep.c (i386_extract_return_value): Make function visible - for all i386 targets, but only assume floating point values returned - in floating point registers for I386_AIX_TARGET. - - * i386v-nat.c (i386_register_u_addr): Enable code to locate - floating point regs in user struct. - -Wed Nov 1 15:32:57 1995 Fred Fish - - * breakpoint.c (breakpoint_re_set): Fix typo in comment. - * symtab.c (in_prologue): Document func_start and when it is zero - don't call SKIP_PROLOGUE (which typically leads unconditionally to - an error when we try to access a prologue at address 0). - -Tue Oct 31 13:01:15 1995 Fred Fish - - * elfread.c: Include elf-bfd.h rather than libelf.h. - -Tue Oct 31 10:42:42 1995 steve chamberlain - - * win32-nat.c (xlate_exception): Treat a stack overflow like a SEGV. - -Sun Oct 29 11:22:05 1995 Fred Fish - - * monitor.c: Include gnu-regex.h rather than system regex.h. - -Sat Oct 28 23:51:48 1995 steve chamberlain - - * defs.h: Test on name __WIN32__ rather than WIN32. - * inflow.c (new_tty): Likewise - * terminal.h: Likewise. - * utils.c (initialize_utils): Likewise. - * win32-nat.c (child_create_inferiror): Print error code when failing. - * config/i386/win32.mh (XM_CLIBS): Need -lkernel32. - -Sat Oct 28 04:52:36 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * symtab.h (enum address_class): Add LOC_UNRESOLVED for - a location whose address has to be resolved via the minimal - symbol table. - * buildsym.c (finish_block), findvar.c (symbol_read_needs_frame, - read_var_value), printcmd.c (address_info), - symmisc.c (print_symbol, print_partial_symbol): Handle - LOC_UNRESOLVED. - * stabsread.c (scan_file_globals): Change unresolved LOC_STATIC - symbols to LOC_UNRESOLVED. Remove rt_common_objfile lookup - kludge, global common symbols are now handled by LOC_UNRESOLVED. - (scan_file_globals_1): Move code back to scan_file_globals, - delete. - -Fri Oct 27 09:54:07 1995 Stu Grossman (grossman@cygnus.com) - - * breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET - around calls to create_longjmp_breakpoint. Why install the - breakpoints if we can't find the longjmp target? - * infrun.c (wait_for_inferior): Cleanup comments near call test. - * remote-mips.c: Fixed a bunch of prototypes to avoid char/int - complaint from picky compilers. Add comment to mips_expect. - Replace all instances of sr_get_debug with remote_debug. - * (mips_readchar): Don't jam init string to monitor. - mips_initialize() handles that. - * (mips_receive_header): Print better message when we get too - much garbage. - * (mips_request): Allow caller to pass in buff to allow them to - analyze the returned message. - * (mips_initialize): Re-do initialization to try sending a BREAK, - a ^C, and then a download escape sequence. Cleanup protocol - startup. Eliminate sleeps. Clear breakpoints (if using monitor - breakpoints). Re-init frame. - * (mips_detach): Close down target. -start-sanitize-gm - * (mips_resume): Pass signal down to target. - * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. -end-sanitize-gm - * (mips_wait): Handle return status with registers, or breakpoint stuff. - * (mips_kill): Add ^C handling. - * (mips_insert_breakpoint mips_remove_breakpoint): Call new - breakpoint stuff if enabled. - * (calculate_mask remote_mips_set_watchpoint - remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): - Hardware watchpoint/breakpoint stuff. - * (common_breakpoint): Common code for new monitor breakpoint commands. - * (mips_load): Don't use `prompt'. It's a global variable. - * top.c (dont_repeat_command): New command for use in - user-defined commands to suppress auto-repeat (by hittin return key). -start-sanitize-gm - * utils.c (request_quit): Call target_kill here. Good idea. - Needs a better implementation. -end-sanitize-gm - * valops.c: Add start of auto function-call abandonment capability. - -start-sanitize-gm - * c-exp.y: Add code (currently disabled) to handle GM dynamic - structures (it conflicts with @!). - * eval.c (evaluate_subexp_standard): ditto. - * expprint.c (print_subexp dump_expression): ditto. - * expression.h (enum exp_opcode): ditto. - * parse.c (length_of_subexp): ditto. - * configure, configure.in: Add mip*-*-magic* target. - * magic.c magic.h: Special routines to handle GM stuff (like - stepping through dispatcher). - * config/mips/tm-magic.h config/mips/magic.mt: New files for - magic target support. -end-sanitize-gm - -Thu Oct 26 22:02:27 1995 Stan Shebs - - * mpw-config.in: Add support for PowerMac host, add beginnings - of native support. - * mpw-make.sed: Disable subdir recursion, edit out useless rule. - * mac-xdep.c (Values.h): Don't include. - (GestaltEqu.h): Include Gestalt.h instead. - (do_mouse_down): Comment out control tracking, needs to be - updated to use UPP before will work on PowerMac. - * config/xm-mpw.h: New file, all-Mac host support. - * config/m68k/xm-mpw.h: Move most definitions into generic Mac - support. - * config/powerpc/xm-mpw.h: New file, PowerMac host support. - -Thu Oct 26 15:21:32 1995 Brendan Kehoe - - * regex.h: Renamed to gnu-regex.h. - * regex.c: Renamed to gnu-regex.c. - * Makefile.in (POSSLIBS): Refer to gnu-regex.h and gnu-regex.c. - (REGEX, REGEX1): Change to gnu-regex.o instead of regex.o. - (regex.o): Renamed to gnu-regex.o; refer to gnu-regex.c. - (irix5-nat.o, osfsolib.o, gnu-regex.o, solib.o, source.o, symtab.o): - Likewise. - * irix5-nat.c, osfsolib.c, gnu-regex.c, solib.c, source.c, symtab.c): - Include "gnu-regex.h" instead of "regex.h". - * alpha-tdep.c (in_prologue): Rename to alpha_in_prologue, to - avoid conflicts with symtab.h. - -Tue Oct 24 18:30:18 1995 Jason Molenda (crash@phydeaux.cygnus.com) - - * config/pa/hppahpux.mh: Remove hardcoding of X locations. - * Makefile.in: Use X11_CFLAGS, X11_LDFLAGS and X11_LIBS. - * configure.in: Link X statically on Solaris, SunOS and HPUX. - -Tue Oct 24 12:26:14 1995 Stu Grossman (grossman@cygnus.com) - - * monitor.c (monitor_expect_regexp): Same as monitor_expect, but - with the obvious extension. - (monitor_read_memory_single): Use regexp for getmem.resp_delim - because of parsing ambiguities caused by certain monitors. - (monitor_read_memory): Use new regexp stuff to parse - getmem.resp_delim. - * monitor.h (struct memrw_cmd->resp_delim): Document this as a - regexp. - * sh3-rom.c: Finish off table. Use new regexp capability for - getmem commands. - - * infrun.c (wait_for_inferior): Disable questionable code near - the step range test. Replace call detection test with much - simpler (and more efficient) test that doesn't require prologue - examination (as often). - * symtab.c symtab.h (in_prologue): New function that indicates - whether or not we are in a function prologue. This uses the - symbol table, and then falls back to prologue examination if that - fails. It's much more efficient for remote debugging because it - avoids examining memory, which is very slow. This is used in - wait_for_inferior to determine if we've made a function call that - needs to be skipped over (for next/nexti). - * mips-tdep.c (after_prologue): New function, returns the PC - after the prologue. Uses PDRs and the symbol table. - (mips_find_saved_regs): Use in_prologue() to avoid costly - prologue examination if possible. - (mips_skip_prologue): Use after_prologue() if possible to avoid - costly prologue examination. - -Mon Oct 23 16:03:33 1995 James G. Smith - - * configure.in (configdirs): Added support for the VR4300 default - builds (mips64*vr4300*el-*-elf*, mips64*vr4300*-*-elf*). - - * configure: Regenerated. - - * remote-mips.c (mips_load): Updated the prompt spotting code to - make use of the TARGET_MONITOR_PROMPT manifest. - -Sat Oct 21 06:11:49 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * alpha-tdep.c, mips-tdep.c (init_extra_frame_info): - Do not set saved registers from heuristics for a sigtramp frame. - - * dwarfread.c (enum_type): Determine signedness of enum type - from enumerators. - - * mips-tdep.c: Include gdb_string.h, gcc -Wall lint. - - * rs6000-nat.c (xcoff_relocate_core): Fix typo. - - * valops.c (value_repeat): Fix length of memory transfer to - match recent allocate_repeat_value change. - -Thu Oct 19 19:04:35 1995 Per Bothner - - * gdbtypes.c (get_discrete_bounds): Fix typo. - -Thu Oct 19 12:15:37 1995 Stan Shebs - - * defs.h (SEEK_SET, SEEK_CUR): Add default definitions. - * dbxread.c, mdebugread.c, os9kread.c (SEEK_SET, SEEK_CUR): - Remove default definitions. - - * Makefile.in (CC-LD): Rename to CC_LD, so MPW xform works. - (MMALLOC_SRC): Define. - (MMALLOC_CFLAGS): Use. - (ser-mac.o): Add rule. - * dwarfread.c, somread.c, ultra3-nat.c, xcoffread.c: Replace L_SET - with SEEK_SET in all calls to bfd_seek. - * scm-tags.h (scm_tags): Remove excess comma. - - * mpw-config.in: Adapt to work with autoconf'ed configury; - build config.h, add empty definitions to mk.tmp. - (powerpc-apple-macos): Make it work. - * mpw-make.sed: New file, sed commands to translate Unix makefile - into MPW syntax. - * mpw-make.in: Remove. - * mac-gdb.r: New file, was macgdb.r, renamed for consistency - with other tools, now includes cfrg resource. - * macgdb.r: Remove. - * config/m68k/xm-mpw.h: Remove most of contents, replace with - include of include/mpw/mpw.h. - -Tue Oct 17 10:38:53 1995 Jeffrey A Law (law@cygnus.com) - - * hppa-tdep.c (frame_chain): Fix more obscure problems caused - by system calls that core dump processes without saving all - the register state. - - * config/pa/hppahpux.mt (XDEPFILES): Remove bogus definition. - * config/pa/hppapro.mt (XDEPFILES): Likewise. - -Tue Oct 17 08:04:26 1995 Fred Fish - - * NEWS: Fix typo. - -start-sanitize-sh3e -Mon Oct 16 18:24:03 1995 Jim Wilson - - * config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): Return builtin_type_float - for FP registers. - (REGISTER_NAMES): Add FP register names. Remove ticks, stalls, cycles, - insts, plr, and tlr. - (NUM_REGS, NUM_REALREGS): Increase from 23 to 41. - (FPUL_REGNUM, FP0_REGNUM): New macros. - -end-sanitize-sh3e -Mon Oct 16 11:27:06 1995 Stu Grossman (grossman@cygnus.com) - - * remote-mips.c: Add support for speedy (about 10x faster) - downloads. - - * remote-array.c: Move baud_rate initialization from - _initialize_array to array_open. It was forcing the baud rate of - all targets to be 4800 baud! Seems like I've fixed this before... - * config/mips/idt.mt (TDEPFILES): Remove remote-array.o. This - has *nothing* to do with IDT!!! - -start-sanitize-gdbtk - * gdbtk.c (gdb_disassemble): Use fprintf_unfiltered instead of - fprintf_filtered. -end-sanitize-gdbtk - - * Makefile.in sh3-rom.c config/sh/sh.mt config/sh/tm-sh.h: Add - sh3 monitor support. - * monitor.c: Cleanup regexp compilation stuff to make it easier - to use several regexps. - * monitor.h: Get rid of struct rom_cmd_data. It's no longer used. - * config/m68k/tm-monitor.h: Don't redefine NUM_REGS here. It just - causes GDB to crash. - - * sparcl-tdep.c: Cleanup serial error handling. - -Sun Oct 15 16:19:27 1995 Stan Shebs - - * rs6000-tdep.c: Don't include a.out.h, improve some formatting. - -Fri Oct 13 15:27:49 1995 Stu Grossman (grossman@cygnus.com) - - * dcache.c: Change default value of remotecache to off. It just - screws up too many targets. - * sparcl-stub.c: Add prototypes to many forward decls. - * Create private copies of strlen, strcpy, and memcpy to prevent - chaos when user steps into them. - * (trap_low handle_exception): Clean up DSU support code - (hardware breakpoints). Move lots of stuff from asm-land to - C-land (make it much easier to #ifdef if necessary). Also, use - trap 255 to get into break mode instead of doing a DSU register - write, which may trash the register. - * (putpacket): Don't check return value of putDebugChar. It - returns void... - -Fri Oct 13 14:16:17 1995 steve chamberlain - - * remote-sim.h: Always include callback.h. - (sim_set_callbacks): New declaration. - -Fri Oct 13 10:57:40 1995 Jeffrey A Law (law@cygnus.com) - - * somsolib.c (som_solib_add): Just give a warning if a file - mentioned in the dld_list can't be found. - * config/pa/tm-hppah.h (FRAME_SAVED_PC_IN_SIGTRAMP): Dig out - the PC from the PC queues rather than %r31. - -Thu Oct 12 13:36:15 1995 Jeffrey A Law (law@cygnus.com) - - * corelow.c (core_open): Don't update the to_sections and - to_sections_end fields in core_ops here. It's too late. - * irix5-nat.c (solib_add): Update the to_sections and - to_sections_end fields in core_ops here if needed. - * osfsolib.c (solib_add): Likewise. - * rs6000-nat.c (xcoff_relocate_core): Likewise. - * solib.c (solib_add): Likewise. - * somsolib.c (solib_add): Likewise. - -Wed Oct 11 17:25:59 1995 Fred Fish - - * Makefile.in (VERSION): Bump version to 4.15.1 - -Tue Oct 10 15:26:39 1995 Fred Fish - - * Makefile.in (VERSION): Version 4.15 released. - * README: Updated for version 4.15. -start-sanitize-gdbtk - * README.GDBTK: Updated for version 4.15 -end-sanitize-gdbtk - * NEWS: Updated for 4.15 release. - -Tue Oct 10 13:18:50 1995 Fred Fish - - * configure.in: Add AC_PROG_YACC - * configure: Regenerate - * Makefile.in (BISON): Remove macro definition. - (YACC): Set from autoconfig. - (FLAGS_TO_PASS): Remove BISON. - (TARGET_FLAGS_TO_PASS): Remove BISON. - -Tue Oct 10 12:25:11 1995 steve chamberlain - - * win32-nat.c (child_create_inferior): Pass argv correctly. - * Makefile.in (win32-nat.o): Add dependencies. - -Mon Oct 9 14:36:29 1995 steve chamberlain - - * NEWS: Add information about win32 and arm code. - * win32-nat.c: Renamed from win32.c. - * config/i386/win32.mh: Renamed from config/i386/i386win32.mh. - * config/i386/win32.mt: Renamed from config/i386/i386win32.mt. - * config/i386/tm-win32.h: Renamed from config/i386/tm-i386win32.h. - * config/i386/xm-win32.h: Renamed from config/i386/xm-i386win32.h. - * configure.in (i[345]86-*-win32): Updated to cope with filename - changes. - * configure: Regenerated. - -Sun Oct 8 18:01:04 1995 Per Bothner - - * ch-exp.y (yylex): Also look for '$' following '$'. - -Sat Oct 7 22:52:42 1995 Michael Meissner - - * ch-exp.y (yylex): Fix typo. - -Fri Oct 6 11:56:49 1995 Jim Wilson - - * remote-sim.c (gdbsim_open): Put callback initializations here. - (_initalize_remote_sim): Not here. - -Fri Oct 6 17:08:49 1995 Stan Shebs - - * top.c (execute_control_command): Use 0/1 instead of BFD's - true/false. - -Fri Oct 6 14:43:19 1995 Stu Grossman (grossman@cygnus.com) - - * sparcl-stub.c: Include sparclite.h to get access to register - fondling macros. - * (trap_low): Save and restore FP regs if necessary. Also, clean - up save and restore of debug unit regs. - * (hard_trap_info): Add more architecturally defined traps. - * (set_debug_traps): Only set FP disabled trap if FP is disabled. - * (get_in_break_mode): Clean up. Get rid of calls to - set_hw_breakpoint_trap(). Also, use write_asi macro. - * (handle_exception): Clean up `g' and `G' commands. Add `P' - command. - * (hw_breakpoint): Why was this here!? It's gone now... - -Fri Oct 6 11:56:49 1995 Jim Wilson - - * callback.c (fdbad): Fix typo in comment. - (os_close, os_isatty, os_lseek, os_read, os_write): Use if - statements rather than || to get correct return value. - (os_write_stdout): Pass missing first argument to os_write. - * remote-sim.c: Include callback.h. - (_initialize_remote_sim): Call sim_set_callbacks and then - initialize the callbacks. - -Thu Oct 5 17:28:09 1995 Per Bothner - - * values.c (allocate_repeat_value): Allocate an array type, and - a value of that type; use that instead of setting VALUE_REPEATED. - * value.h (struct value): Remove fields repetitions and repeated. - (VALUE_REPEATED, VALUE_REPETITIONS): Removed, no longer used. - * c-valprint.c, ch-valprint.c, eval.c, printcmd.c, valops.c, - value.h, values.c: Simplify, since now VALUE_REPEATED is never - used. - * valprint.c (value_print_array_elemen): Removed never-used - function. - -Thu Oct 5 15:14:36 1995 Per Bothner - - * parse.c (write_dollar_variable): New function. - - * c-exp.y (yylex): Replace code for recognizing '$' - pseudo-variables with a call to write_dollar_variable. - Simplify grammar correspondingly. - * f-exp.y: Likewise. - * m2-exp.y: Likewise. - * ch-exp.y: Likewise. (Remove function match_dollar_tokens.) - * scm-exp.c (scm_lreadr): Call write_dollar_variable to handle '$'. - -Thu Oct 5 13:27:30 1995 steve chamberlain - - * win32.c: New file; support for debugging on windows NT. - * configure.in: (i[345]86-*-win32): New target. - * configure: Regnerated. - * eval.c (evaluate_subexp_standard): Remove unused name. - * serial.c (gdb_string.h): Include. - * source.c (value.h): Include. - * config/i386/i386win32.mh (XDEPFILES): Add win32.o - * config/i386/i386win32.mt: New. - * config/i386/tm-i386win32.h: New. - -Wed Oct 4 18:41:34 1995 Per Bothner - - * expression.h (enum exp_code): Added OP_NAME. - * expprint.c (print_subexp): Add OP_NAME support. - * parse.c (length_of_subexp, prefixify_subexp): Likewise. - * scm-lang.c (scm_unpack, in_eval_c, scm_lookup_name): new function. - * scm-lang.h: Declare builtin_type_scm; other minor tweaks. - * values.c (unpack_long): If type is SCM, call scm_unpack. - * scm-valprint.c (scm_val_print): Use extract_signed_integer, - instead unpack_long - * scm-lang.c: More Scheme expression parsing from here ... - * scm-exp.c: ... to here. New file. - Also, provide for gdb to evaluate simple constants and names.. - * Makefile.in: Note new scm-exp.{c,o}. - -Wed Oct 4 17:23:03 1995 Per Bothner - - * gdbtypes.c (get_discrete_bounds): New function. - (force_to_range_type): Use get_discrete_bounds. - * gdbtypes.h (get_discrete_bounds): Add declaration. - * valarith.c (value_bit_index): Generalize to use get_discrete_bounds. - * ch-valprint.c (chill_val_print): Make (power)sets and bitstring - support use get_discrete_bounds and generally be more robust. - -Tue Oct 3 16:54:56 1995 Stan Shebs - - * remote-nrom.c (nrom_ops): Add value for to_thread_alive, - add comments naming slots. - -Mon Oct 2 21:45:44 1995 Jeff Law (law@hurl) - - * top.c (build_command_line): Demand arguments for if/while - commands. - -Mon Oct 2 13:08:01 1995 Jason Molenda (crash@phydeaux.cygnus.com) - - * Makefile.in (X11_CFLAGS): Set only to @X_INCDIR@. - -Sat Sep 30 16:13:36 1995 Per Bothner - - * scm-lang.c: Moved Scheme value printing code to ... - * scm-valprint.c: ... this new file. - Also major improvements in support for printing SCM values. - * scm-lang.h: New file. - * scm-tags.h: New file. - * Makefile.in: Note new scm-valprint.{c,o}. - -Sat Sep 30 09:35:02 1995 Jason Molenda (crash@phydeaux.cygnus.com) - - * configure.in: X_INCDIR and X_LIBDIR added. - * Makefile.in: @X_INCDIR@ and @X_LIBDIR@ added. - * configure: Regnerated. - -Fri Sep 29 02:10:05 1995 steve chamberlain - - * config/arm/tm-arm.h (FRAME_CHAIN, FRAME_CHAIN_VALID): - Any pc > LOWESTPC is ok. - - * remote-rdp.c (rdp_init): Take out variable baud rate stuff. - (remote_rdp_detatch): Delete. - * breakpoint.c (ctype.h): Don't include twice. - - * Makefile.in (remote-rdp.o): Doesn't need remote-rdp.h - * callback.c (os_printf_filtered): fix protos. - * defs.h (puts_filtered, puts_unfiltered - [v|f|]printf_[un]filtered): Make format arg const. - * remote-rdp.c (rdp_init): Attept to sync at different - baudrates. - * utils.c (puts_filtered, puts_unfiltered - [v|f|]printf_[un]filtered): Define prototypes with - const in the right place. - -Thu Sep 28 17:43:39 1995 Per Bothner - - * defs.h (enum language): Add language_scm. - * expression.h (enum exp_code): Added OP_EXPRSTRING. - * scm-lang.c: Preliminary support for Guile /SCM dialect of Scheme. - * expprint.c (print_subexp): Add OP_EXPRSTRING support. - * parse.c (length_of_subexp, prefixify_subexp): Likewise. - * valops.c (find_function_in_inferior): New function. - (value_allocate_space_in_inferior): New function. - (allocate_space_in_inferior): Redefine using previous function. - * Makefile.in (SFILES): Add scm-lang.c. - (COMMON_OBS): Add scm-lang.o - -Thu Sep 28 14:32:11 1995 steve chamberlain - - * callback.[ch]: New files. - * remote-rdp.c: Support for the ARM RDP monitor. - * Makefile: Update. - * arm-tdep.c (arm_othernames): New. - (_initialize_arm_tdep): install 'othernames' command. - (arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New. - * configure.in: Check for termios.h, termio.h and sgtty.h. - (i[345]86-*-win32*): New host. - * configure: Regenerated. - * inflow.c: Clean up inclusions. - * main.c (main): Check for WINGDB, not WIN32. - * printcmd.c (do_examine): Put QUIT test in loop. - * remote-hms.c (e7000_load): Delete. - (hms_ops): Point to generic_load instead. - * remote-hms.c (hms_ops): Point to generic_load. - * remote-sim.c (sim_callback_write_stdout): Becomes - gdbsim_write_stdout. - (gdbsim_load): Call generic_load. - * remote-utils.c (gr_load_image): Delete. - * ser-unix.c (terminal.h): Include instead of havig - own #if tree. - (hardwire_flush_input): Reset input buffer too. - * source.c (openp): If WIN32 then open file in binary mode. - * terminal.h: Configure IO mechanism using autoconf defines if - available and not overriden. - * utils.c (quit, pollquit, notice_quit): WIN32 check becomes - WINGDB check. - - * config/arm/arm.mt (TDEPFILES): Add remote-rdp.o. - * config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes - TARGET_BYTE_ORDER_SELECTABLE. - (ADDR_BITS_REMOVE): New. - (ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New. - (INST_xx): New. - (FRAME_FIND_SAVED_REGS): Pass the right argument. - (arm_get_next_pc): Declare. - -Wed Sep 27 10:14:36 1995 Per Bothner - - * valops.c (search_struct_field): Also allow "else" as a variant - name. - * eval.c (evaluate_struct_tuple): New function. Used to evaluate - structure tuples. Now also handles Chill variant records. - (get_label): New function, used by evaluate_struct_tuple. - (evaluate_subexp_standard case OP_ARRAY): Use evaluate_struct_tuple. - (evaluate_labeled_field_init): Removed. - - * valops.c (search_struct_field): Generalize to work with Chill - variant records. - -Sat Sep 23 01:22:23 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * mdebugread.c (parse_partial_symbols): Reset includes_used - and dependencies_used after finishing the partial symbol table. - - * rs6000-tdep.c (push_dummy_frame): Handle lr_offset of zero - correctly. - - * rs6000-nat.c (xcoff_relocate_core): Don't relocate data - addresses for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE - is defined. - * xcoffread.c: gcc -Wall lint. Remove traceback table reading - code. The existing code tried to add parameter information for - functions compiled without -g, which cannot be done properly - for optimized code and produced misleading parameter displays. - (ef_complaint, eb_complaint): Make a local static copy to avoid - dependency on coffread.c. - (read_xcoff_symtab, process_xcoff_symbol, scan_xcoff_symtab): - Enter C_EXT/C_HIDEXT symbols into the minimal symbol table only. - (read_xcoff_symtab): Ignore C_STAT section auxiliary entry - symbols. Complain about unmatched .ef and .eb symbols instead of - segfaulting. - (process_xcoff_symbol): Determine value of C_GSYM symbols via - the global_sym_chain mechanism in stabsread.c. - (xcoff_new_init): Call stabsread_new_init and buildsym_new_init. - (init_string_tab): Initialize length field bytes in the strtbl. - (scan_xcoff_symtab): Skip symbols that start with `$' or `.$'. - Set first_fun_line_offset for symbols with two auxents only. - -Wed Sep 20 21:06:35 1995 Jeff Law (law@snake.cs.utah.edu) - - * op50-rom.c (op50n_cmds): Send ".\r" after the interrupt - character. - -Wed Sep 20 13:12:56 1995 Ian Lance Taylor - - * Makefile.in (maintainer-clean): New target, synonym for - realclean. Add GNU standard maintainer-clean echos. - * gdbserver/Makefile.in (maintainer-clean): New target, synonym - for realclean. - * nlm/Makefile.in (maintainer-clean): Likewise. - -Wed Sep 20 08:16:03 1995 steve chamberlain - - * defs.h (xmalloc, xrealloc): Delete, they're declared in libiberty.h. - (GETENV_PROVIDED, FCLOSE_PROVIDED): New. - * doc/gdbint.texinfo (GETENV_PROVIDED, FCLOSE_PROVIDED): Document. - * remote-sim.[ch] (sim_callback_write_stdout): New. - -Tue Sep 19 15:28:58 1995 Per Bothner - - * gdbtypes.c (create_set_type): Set TYPE_LENGTH in bytes, not bits. - * valops.c (value_bitstring): TYPE_LENGTH is bytes, not bits. - - * gdbtypes.c (force_to_range_type): Calculate upper limit of - TYPE_CODE_CHAR depending on TYPE_LENGTH (instead of just using 255). - -Mon Sep 18 01:43:42 1995 Jeff Law (law@snake.cs.utah.edu) - - * somsolib.c (auto_solib_add_at_startup): Delete definition. No - longer needed. - -Sat Sep 16 13:23:36 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * config/mips/tm-mips.h (UNUSED_REGNUM): Define. - * mipsv4-nat.c (supply_gregset): Fill UNUSED_REGNUM register - with zero. - -Thu Sep 14 17:35:24 1995 Stu Grossman (grossman@cygnus.com) - - * remote-sim.c (gdbsim_create_inferior): Back out change that - broke all simulator configurations except the rs6000. - -Thu Sep 14 14:44:59 1995 Jeffrey A. Law - - * monitor.c (monitor_expect): Discard NULL characters. - -Thu Sep 14 14:12:30 1995 Kung Hsu - - * infcmd.c: Add extern declaration for auto_solib_add_at_startup. - -Wed Sep 13 13:33:58 1995 Kung Hsu - - * symfile.c: Move global variable auto_solib_add_at_startup from - solib.c to symfile.c. - * solib.c: ditto. - * symfile.h: Add extern declaration of the above mentioned variable. - * infcmd.c: Take out extern declaration, since it's in symfile.h. - -Thu Sep 14 12:39:35 1995 Stu Grossman (grossman@cygnus.com) - - * coffread.c (coff_symtab_read): Complain about unmatched .ef and - .eb symbols instead of segfaulting. - -Wed Sep 13 13:33:58 1995 Kung Hsu - - * stabsread.c (read_one_struct_field): Use subfile language instead of - global language. Improve efficiency. - -Wed Sep 13 08:45:02 1995 Jeff Law (law@fast.cs.utah.edu) - - * somsolib.c (auto_solib_add_at_startup): Define new global variable. - (som_solib_create_inferior_hook): Don't add libraries if - auto_solib_add_at_startup is zero. - (_initialize_som_solib): Add command to toggle - auto_solib_add_at_startup. - -Tue Sep 12 19:37:24 1995 Jeff Law (law@snake.cs.utah.edu) - - * monitor.c (monitor_make_srec): Fix thinkos in computation - of addr_size. - -Tue Sep 12 15:46:18 1995 Kung Hsu - - * stabsread.c (read_one_struct_field): Add a patch to handle cfront - generated stabs that each field is in full mangled name. - - * stabsread.c: To include language.h and expression.h for the reason - above. - - * infcmd.c (attach_command): Add solibs only when - auto_solib_add_at_startup is set. - -Mon Sep 11 17:22:35 1995 Fred Fish - - * NEWS: Add information about remote target caching. - -Sun Sep 10 15:36:21 1995 Fred Fish - - * defs.h: Only include mmalloc.h if NO_MMALLOC is not - defined. - -Sun Sep 10 10:24:48 1995 Michael Tiemann - - * tm-ppc-eabi.h (PC_IN_CALL_DUMMY): Redefine this to work with the - simulator. FIXME. - - * rs6000-tdep.c (push_dummy_frame): Calculate the correct link - register offset from the current frame (don't assume it is always 8). - (push_dummy_frame): Add comment about having only 4096 bytes of - stack space in the simulator (by default). - - * remote-sim.c (gdbsim_create_inferior): Call - `add_text_to_loadinfo' so that gdb can find TOC entries when - calling functions in the inferior. - -Sun Sep 10 09:00:28 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * sparc-tdep.c (fill_fpregset): Fix incorrect FP_MAX_REGNUM - substitution. - (supply_fpregset): Use FP_MAX_REGNUM. - -Sat Sep 9 08:21:52 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * stabsread.c (read_enum_type): Exit loop for putting pending - enum symbols into the enum type correctly if we had no pending - symbols on entry to read_enum_type. - -Fri Sep 8 12:57:41 1995 Kung Hsu - - * inferior.h: Add extern declaration of inferior_environ. - * solib.c (solib_map_sections): To get inferior's env instead of - gdb's for LD_LIBRARY_PATH, same for PATH. - - * solib.c (solib_map_sections): Copy full path name into so_list - structure so that symbol_file_add can find it. - -Tue Sep 5 17:47:53 1995 Doug Evans - - * config/sparc/tm-sp64.h (REGISTER_RAW_SIZE): Lower 32 fp regs - have size 4. - (REGISTER_VIRTUAL_SIZE): Likewise. - (REGISTER_VIRTUAL_TYPE): Lower 32 fp regs have type float. - Upper 32 fp regs have type double. - * sparc-tdep.c (NUM_SPARC_FPREGS): Replace with - (FP_REGISTER_BYTES): this, and update all uses. - (FP_MAX_REGNUM): Define if not already. - (get_saved_register): Handle new sparc64 fp regs. - (sparc_frame_find_saved_regs): Likewise. - (sparc_print_register_hook): Only print fp regs < 32 as doubles. - Add code to handle long doubles when gdb does. - (_initialize_sparc_tdep): Use print_insn_sparc64 if sparc64. - -Sat Sep 2 06:41:26 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * configure.in: Explicitly `exit 0' for broken shells. - * configure: Rebuilt. - - * symtab.c (list_symbols): Add missing blank after - `' output. - - * valops.c (value_assign): Handle truncation when assigning - to bitfields. Use value_copy to construct the return value - from toval. - * values.c (value_copy): Copy VALUE_FRAME and VALUE_OPTIMIZED_OUT. - -Fri Sep 1 08:25:50 1995 James G. Smith - - * configure (mips64*vr4300*-*-elf): Support added. - * remote-mips.c (mips_readchar): Change to allow build-time prompt - string. - * config/mips/tm-mips.h: Added TARGET_MONITOR_PROMPT. - * config/mips/{vr4300.mt, vr4300el.mt, tm-vr4300.h, - tm-vr4300el.h}: Added. - -Thu Aug 31 12:48:04 1995 Jim Wilson - - * config/sh/sh.mt (SIM): Add -lm. - -Wed Aug 30 18:10:57 1995 Kung Hsu - - * rmote-nindy.c (non_dle, nidy_resume, nindy_wait): Changes to - conform to GNU coding standards. - - * solib.c (match_main): Modify to follow GNU coding conventions. - -Mon Aug 28 17:07:26 1995 Kung Hsu - - * remote.c (remote_wait): Revert 19 July my change which should be - customer specific. - -Sat Aug 26 00:26:11 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * mdebugread.c (parse_symbol): Handle sh.value of zero for enums. - Determine signedness of enum type from enumerators. - (parse_type): Handle btIndirect types, handle fBitfield for - some non-member types. - (upgrade_type): Use TYPE_FLAG_TARGET_STUB for arrays with - unknown length. - (cross_ref): Handle stIndirect forward reference to btTypedef. - - * stabsread.c (read_enum_type): Determine signedness of enum - type from enumerators. - - * top.c (execute_command): Remove trailing whitespace from - command arguments, except for `set' and `complete' commands. - (validate_comname): Allow underscores in user defined command - names. - - * values.c (modify_field): Change `Value does not fit in %d bits' - error to a warning. Exclude sign extension bits of negative field - values from fit check. - -Fri Aug 25 11:31:29 1995 Michael Meissner - - * configure.in (powerpc*-*-eabisim*): Only link in the simulator - if the target is powerpc{,le}-*-eabisim*, since the simulator - needs GCC to build. - * config/powerpc/ppc{,le}-sim.mt: Cloned from ppc{,le}-eabi.mt. - * config/powerpc/ppc{,le}-eabi.mt: Remove simulator support. - * config/powerpc/tm-ppc{,le}-sim.mt: Include tm-ppc{,le}-sim.h. - -Wed Aug 23 16:55:35 1995 Michael Meissner - - * config/powerpc/ppc{,le}-eabi.mt (SIM_OBJS, SIM): Link in the - PowerPC simulator. - -Tue Aug 22 02:00:47 1995 Jeff Law (law@snake.cs.utah.edu) - - * tm-hppa.h (EXTRACT_RETURN_VALUE): Fix for FP values. - - * tm-hppa.h (STORE_RETURN_VALUE): Fix to work with -msoft-float - calling conventions too. Use the TYPE of the return value, not - its length to determine if it should also be copied into the - floating point registers. - - * tm-hppa.h (PROLOGUE_FIRSTLINE_OVERLAP): Delete. Causes more - problems than it fixes. - * hppa-tdep.c (skip_prologue): If we exit the main loop without - finding all the register saves, retry again without looking for - the registers we could not find the first time. - -Mon Aug 21 23:39:56 1995 Jeff Law (law@snake.cs.utah.edu) - - * hppa-tdep.c (frame_chain_valid): Handle systems where "$START$" - calls "main" directly. - (skip_prologue): Always assume arguments were saved into the stack - since GCC will do so without setting the magic Args_Saved bit in - the unwind descriptor. - -Mon Aug 21 11:49:17 1995 Kung Hsu - - * remote-udi.c (udi_wait): Mask off high bits of stop reason. - * remote-udi.c (fetch_register): For unfetchable regs, pretend it's - done. Fix a bug. - -Mon Aug 21 00:45:17 1995 Jeff Law (law@snake.cs.utah.edu) - - * Makefile.in (install): Remove "brokensed" hack, unnecessary now - that we're using autoconf. - (uninstall): Likewise. - -start-sanitize-gdbtk -Sat Aug 19 17:20:22 1995 Michael Tiemann - - * gdbtk.tcl: ENABLE comes back as "1" or "0", not "enable" or - "disable". - Also, wire up the breakpoint window so that it can be demo'd. -end-sanitize-gdbtk - -Sat Aug 19 01:19:34 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * gdbtypes.c (recursive_dump_type): Add dont_print_type_obstack - to inhibit infinite recursion when printing aggregate types. - -Fri Aug 18 17:48:55 1995 steve chamberlain - - * dcache.c (dcache_write_line): Write dirty lines right. - -Fri Aug 18 06:26:56 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * sparc-tdep.c (isbranch): Fix typo which caused wrong - target addresses for annulled branches. - -Wed Aug 16 21:54:39 1995 Jeff Law (law@snake.cs.utah.edu) - - * config/pa/tm-hppa.h (PROLOGUE_FIRSTLINE_OVERLAP): Define. - -Tue Aug 15 07:51:21 1995 steve chamberlain - - * remote.c (remote_write_bytes): Chop up large transfers. - -Mon Aug 14 17:56:36 1995 Stan Shebs - - * gcc.patch: Remove, relevant only to long-ago versions of GCC. - -Mon Aug 14 13:43:01 1995 Kung Hsu - - * config/sparc/tm-sparclite.h: Define FRAME_CHAIN_VALID_ALTERNATE. - * blockframe.c (inside_main_func): If main func addr range not set, - try to set it now. - -Sat Aug 12 15:34:54 1995 Jeffrey A. Law - - * config/powerpc/xm-aix.h (FIVE_ARG_PTRACE): Define. - * config/rs6000/xm-rs6000.h (FIVE_ARG_PTRACE): Likewise. - - * configure.in: Recognize aix4 specially as some aspects - of aix4 need different handling than aix3. - * configure: Updated. - * config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: New files - specific to aix4 support on the power pc. - * config/powerpc/tm-ppc-aix.h (DONT_RELOCATE_SYMFILE_OBJFILE): Do - not defined. The aix4 specific target files will do that. - * config/rs6000/{aix4,mh,aix4,mt,tm-rs6000-aix4.h}: New files - specific to aix4 support on the rs6000. - - * config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR): Don't - do the conversion if the pointer is not a magic aix function - pointer. - * rs6000-tdep.c: Include objfiles.h and symtab.h. - (is_magic_function_pointer): New function. - - * rs6000-tdep.c (skip_prologue): Refine check for frameless - functions. Handle b .+4 emitted by aix4 compilers. Only - allow one load of a minimal toc pointer. Handle aix4 compiler's - code for alloca. - - * rs6000-tdep.c (find_toc_address): Report an error if no toc was - found rather than possibly core dumping. - - * partial-stab.h: Handle extra field generated by the aix4 compiler - for enumerations. - * stabsread.c (read_enum_type): Likewise. - -Sat Aug 12 03:18:04 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * rs6000-tdep.c (extract_return_value): Fix returning of values - whose length is less than the register size for big endian targets. - -Fri Aug 11 13:04:32 1995 Kung Hsu - - * symtab.c (list_symbols): if break command set breakpoint on - matched symbol. - -Wed Aug 9 18:59:05 1995 Fred Fish - - * defs.h (strchr, strrchr, strstr, strtok, strerror): Enclose in - #ifndefs to protect against previous definitions as macros. - -Wed Aug 9 14:51:36 1995 Kung Hsu - - * xcoffread.c (xcoff_symfile_offset): Revert an unwanted change - that got in accidentally with Aug 1 change. - -Sat Aug 5 09:07:28 1995 steve chamberlain - - * remote-hms.c (hms_cmds): Get reg term right. - * monitor.c (monitor_fetch_register): If we see - a non-hex digit, just stop reading. - * remote.c (remote_wait): Change way $O is handled. - -Wed Aug 9 11:42:36 1995 Jeffrey A. Law - - * configure.in (powerpc-*-aix*): Recognize as a new gdb host - and target. - (powerpc-*-eabi*): Don't set configdirs. - (powerpcle-*-eabi*): Likewise. - * configure: Updated. - * rs6000-nat.c (vmap_ldinfo): Don't relocate data addresses - for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE is - defined. - * config/powerpc/{aix.mh,aix.mh}: Host and target makefile fragments - for powerpc running aix4. - * config/powerpc/{nm-aix.h, tm-ppc-aix.h, xm-aix.h}: Native, target - and host include files for powerpc running aix4. - -Wed Aug 9 08:11:45 1995 Stan Shebs - - * top.c (target_output_hook): Really make it match defs.h (char * - is not the same as unsigned char *). - -Tue Aug 8 15:13:05 1995 J.T. Conklin - - * Makefile.in (CXX_FOR_TARGET): Don't use ${rootme}/../gcc/xgcc - unless it is present. - -Tue Aug 8 10:50:15 1995 Jeffrey A. Law - - * top.c (target_output_hook): Make declaration match the one - in defs.h. - - * symfile.c (add_psymbol_to_list): Initialize SYMBOL_SECTION. - (add_psymbol_addr_to_list): Likewise. - * symfile.h (ADD_PSYMBOL_VT_TO_LIST): Likewise. - -Mon Aug 7 15:34:29 1995 steve chamberlain - - * top.c (target_output_hook): New definition. - * stack.c (gdb_string.h): Include after defs.h - * defs.h (target_output_hook): New declaration. - * source.c (mod_path): Fix Win32 \ handling. - -Sun Aug 6 22:14:25 1995 Jeff Law (law@snake.cs.utah.edu) - - * hppa-tdep.c (frame_saved_pc): Don't try to dig a return pointer - out of a long branch stub. - -Fri Aug 4 13:37:31 1995 Jeffrey A. Law - - * xcoffread.c (process_linenos): Fix typo in last change. - -Thu Aug 3 22:01:26 1995 Fred Fish - - * ch-exp.y (write_lower_upper_value): Add prototype so bison - generated parser will insert prototype before first func usage. - Bison and byacc order the output sections differently. Also - make function static. - -Thu Aug 3 10:45:37 1995 Fred Fish - - * Update all FSF addresses except those in COPYING* files. - -Thu Aug 3 01:38:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * config/alpha/tm-alpha.h (EXTRA_FRAME_INFO): Add pc_reg field. - (SKIP_TRAMPOLINE_CODE): Define. - * alpha-tdep.c (alpha_frame_saved_pc): Use pc_reg field from - frame to find the saved pc register. - (alpha_saved_pc_after_call): Skip over shared library trampoline - before trying to find the saved pc register. - (find_proc_desc): Copy PROC_PC_REG from found proc_desc - to heuristic proc_desc. - (init_extra_frame_info): Initialize pc_reg field in frame. - -Wed Aug 2 18:00:36 1995 Stan Shebs - - * configure.in (m68*-est-*): Use monitor target config. - * configure: Update. - * config/m68k/est.mt, config/m68k/tm-est.h: Delete. - * config/m68k/monitor.mt, config/m68k/tm-monitor.h: Fix comments. - -Tue Aug 1 22:52:53 1995 Fred Fish - - * Makefile.in (VERSION): Bump to 4.14.2 - -Tue Aug 1 16:04:36 1995 Kung Hsu - - * xcoffread.c (process_linenos): The value in include file symbol - should point to line number table. Currently this value is not - set correctly by AIX ld. A fix to get around this bug. - -Tue Aug 1 11:44:53 1995 J.T. Conklin - - * configure.in: Check for working mmap, ansi headers, string.h, - strings.h, and memory.h. - * configure: Regenerated. - - * gdb_stat.h: New file, "portable" . - * gdb_string.h: New file, "portable" . - - * altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c, - convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c, - gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c, - i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c, - mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c, - rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c, - symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c, - ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h" - instead of . - - * alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c, - ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c, - core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c, - dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c, - exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c, - fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c, - inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c, - m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c, - monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c, - printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c, - remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c, - remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c, - remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c, - remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c, - remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c, - solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c, - symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c, - valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include - "gdb_string.h" instead of . -start-sanitize-gdbtk - * gdbtk.c: Likewise. -end-sanitize-gdbtk - - * config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h, - sparc/xm-sun4os4.h (HAVE_MMAP): Removed. - - * config/xm-lynx.h, config/i386/xm-ptx.h, - config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h, - config/mips/xm-irix3.h, config/mips/xm-mips.h, - config/mips/xm-news-mips.h, config/mips/xm-riscos.h, - config/pa/hppah.h, config/rs6000/xm-rs6000.h, - config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h, - config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h, - config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed. - * config/mips/xm-irix3.h, config/mips/xm-mips.h, - config/pa/xm-hppah.h (memcpy, memset): Removed declarations. - -Tue Aug 1 02:08:30 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * mips-tdep.c (mips_extract_return_value): Fix returning of - values whose length is less than the register size for big endian - targets. - * alpha-tdep.c (alpha_extract_return_value, - alpha_store_return_value): Use alpha_convert_register_to_* - to handle functions returning "float" correctly. - -Mon Jul 31 19:12:48 1995 Stan Shebs - - * h8500-tdep.c: General linting and cleanup. - (opcodes/h8500-opc.h): Don't include. - (code_size, data_size): Make static. - (frame_locals_address, frame_args_address): Remove. - (h8300_pop_frame): Rename to h8500_pop_frame. - (big_command, medium_command, compact_command, small_command): - Define as regular functions rather than with macro trickery. - (tm_print_insn): Set to correct disassembler function. - * config/h8500/tm-h8500.h: Minor cleanup, add prototypes. - (ABOUT_TO_RETURN): #if 0 out. - (FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS): Use usual define. - (GDB_TARGET_IS_H8500): Remove duplicate definition. - (regoff): Remove, never used. - * config/h8500/h8500.mt (TDEPFILES): Add monitor.o. - -Mon Jul 31 14:32:30 1995 J.T. Conklin - - * configure.in: Check for unistd.h. - * configure: Regenerated. - - * command.c, cp-valprint.c, fork-child.c, i386-tdep.c, - i386b-nat.c, inflow.c, main.c, maint.c, objfiles.c, solib.c, - source.c, stack.c, symfile.c, top.c, utils.c: Include strings.h - and/or unistd.h to bring prototypes into scope. - -Sun Jul 30 01:40:11 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * rs6000-tdep.c (frame_saved_pc): Check for signal handler caller - before trying to determine the start of the function. - (skip_prologue): Skip subroutine call which might save the - floating point registers only if it is within the first three - instructions. - Reinstate setting of alloca_reg if setup of a gcc frame pointer - is found. - (frame_get_cache_fsr): Use new fields in rs6000_framedata. - -Sat Jul 29 14:43:35 1995 Stan Shebs - - * sparclite: Removed subdirectory. aload and eload are now in - utils/sparclite, low-level library is in libgloss. - * configure.in (sparclite*): Don't configure sparclite subdir. - * configure: Update. - * Makefile.in (TARDIRS): Remove, no longer used. - -Sat Jul 29 01:45:56 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * procfs.c (unconditionally_kill_inferior): Clear current signal - if PROCFS_NEED_CLEAR_CURSIG_FOR_KILL is defined. - * config/alpha/nm-osf3.h (PROCFS_NEED_CLEAR_CURSIG_FOR_KILL): Define. - - * alpha-tdep.c: Move sigtramp handling of saved registers from - read_next_frame_reg to alpha_find_saved_regs, handle saved - floating point registers. - * mips-tdep.c: Move sigtramp handling of saved registers from - read_next_frame_reg to mips_find_saved_regs, handle saved - floating point registers. - * config/mips/tm-irix3.h, config/mips/tm-irix5.h, - config/mips/tm-mipsv4.h (SIGFRAME_FPREGSAVE_OFF): Define. - - * sparc-tdep.c (sparc_pc_adjust): Fix check for `unimp' - instruction to handle functions returning structures with - large sizes properly. - -Fri Jul 28 11:50:17 1995 steve chamberlain - - * configure, configure.in (z8k-*-sim): deleted. - -Thu Jul 27 12:49:28 1995 Jeffrey A. Law - - * lynx-nat.c (child_wait): Handle threads exiting. - -Thu Jul 27 07:47:50 1995 Michael Meissner - - * rs6000-tdep.c (skip_prologue): Don't assume the update stack - instruction is the last in the prologue, since xlc stores the lr - after the stack update. Make sure offset is correct sign for - large frames. - (frame_saved_pc): Move test for signal before frameless. - - * config/rs6000/tm-rs6000.h (DEFAULT_LR_SAVE): Define. - * config/powerpc/tm-ppc-eabi.h (DEFAULT_LR_SAVE): Redefine. - -Thu Jul 27 01:22:08 1995 Jeffrey A. Law - - * hppa-tdep.c (hppa_fix_call_dummy): Rewrite code for calling - into shared libraries. - -Wed Jul 26 23:33:34 1995 Michael Meissner - - * config/rs6000/tm-rs6000.h (rs6000_framedata): Add offsets the - gprs, fprs, lr, and cr is stored at. - (FRAME_FIND_SAVED_REGS): Use new fields in rs6000_framedata. - (function_frame_info): Delete declaration. - (SKIP_PROLOGUE): Skip_prologue is now passed a rs6000_framedata - structure to fill in. - (FRAMELESS_FUNCTION_INVOCATION): Function now longer takes a - second argument. - (FRAME_SAVED_PC): Call frame_saved_pc. - - * rs6000-tdep.c (skip_prologue): Recognize V.4 prologues as well - as AIX style. Fill in rs6000_framedata structure. Remember where - the gprs, fprs, cr, and lr are saved. - (pop_frame): Use skip_prologue, not function_frame_info, and use - new rs6000_framedata fields. - (function_frame_info): Function deleted. - (frameless_function_invocation): Separate frame_saved_pc support - to new function. Recognize V.4 frames. - (frame_saved_pc): New function. - (frame_get_cache_fsr): Use skip_prologue, not function_frame_info. - (frame_initial_stack_address): Ditto. - -Wed Jul 26 01:00:37 1995 Jeff Law (law@snake.cs.utah.edu) - - * remote.c: Add documentation for extended protocol operations - and for thread_alive change from a couple weeks ago. - (extended_remote_ops): Declare and define a new target vector - for the extended remote protocol. - (extended_remote_restart): New function to restart the remote - server & process. - (remote_open): Just a stub routine. - (extended_remote_open): New function to start a remote session - using the extended gdb remote protocol. - (remote_open_1): New function containing code common to both - remote_open and extended_remote_open. - (remote_mourn, extended_remote_mourn, remote_mourn_1): Similarly. - (extended_remote_create_inferior): New function for the extended - remote target. - (initialize_remote): Add the extended_remote_ops target vector. - * gdbserver/server.c (main, case '!'): Set extended_protocol. - (main, case 'k'): If the extended protocol is in use, kill the - inferior then start a new one. - (main, case 'R'): New command to restart the remote server and - inferior process. Only supported when using the extended - protocol. - (main, server loop): If the inferior terminates while using the - extended protocol then start a new one. If getpkt fails when - using the extended protocol then exit. - -Tue Jul 25 11:43:44 1995 Stan Shebs - - * mdebugread.c (psymtab_to_symtab_1): Relocate encoded stab - line numbers using the psymtab's section offsets. - -Tue Jul 25 10:43:27 1995 Michael Meissner - - * config/rs6000/tm-rs6000.h (rs6000_framedata): Rename from - aix_framedata. Change all uses. - * rs6000-tdep.c: Change all aix_framedata -> rs6000_framedata. - -Sat Jul 22 23:44:18 1995 Jeff Law (law@snake.cs.utah.edu) - - * defs.h (ATTR_FORMAT): Disable if ANSI_PROTOTYPES is not defined. - -Fri Jul 21 16:50:28 1995 Jeffrey A. Law - - * lynx-nat.c (child_thread_alive): New function. Somehow I - forgot to check this in with all the other thread_alive changes. - -Thu Jul 20 22:22:34 1995 Jeff Law (law@snake.cs.utah.edu) - - * somread.c (som_symtab_read): Add unsatisfied common symbols to - the minimal symbol table. All common symbols are "unsatisfied" - when -E is passed to the linker. - -Thu Jul 20 15:04:57 1995 Fred Fish - - * top.c (show_endian): Cast first arg of printf_unfiltered to - correct type of "char *". - -Thu Jul 20 14:18:51 1995 Jeffrey A. Law - - * lynx-nat.c (child_wait): A thread_id of zero from wait apparently - means the process is single threaded, so there's no need to add - it to the thread list. Handle case where multi-threaded process - reverts back to a single-threaded process. - - * gdbserver/low-hppabsd.c: Remove error declaration. - * gdbserver/low-sparc.c: Likewise. - * gdbserver/low-sun3.c: Likewise. - * gdbserver/server.h: Remove error and fatal declaration. - * gdbserver/utils.c (error): Update to be compatable with recent - changes in defs.h. - (fatal): Likewise. - -Wed Jul 19 22:42:43 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * config/m68k/tm-m68kv4.h (DWARF_REG_TO_REGNUM): Define to - correctly map floating point registers numbers. - - * dwarfread.c (locval, new_symbol): Handle variables that are - optimized out. - - * mdebugread.c: Replace all uses of builtin_type_* with - mdebug_type_*. Define and initialize mdebug_type_*. - - * serial.h (serial_close): Add additional argument `really_close'. - (SERIAL_CLOSE): Update serial_close call accordingly. - (SERIAL_UN_FDOPEN): Use serial_close to handle refcnt properly. - * serial.c (serial_close): Handle `really_close'. - * serial.h (scb_base): Moved to serial.c, made static. - - * valops.c (value_addr): Don't coerce arrays. - (typecmp): Coerce arrays instead of calling value_addr if necessary. - -Wed Jul 19 18:19:28 1995 Stan Shebs - - From Richard Earnshaw (rearnsha@armltd.co.uk): - * infrun.c (wait_for_inferior): Set the convenience variable - $_exitcode to the termination code of the inferior. - * top.c (quit_command): Accept optional expression to use - as parameter to exit(). - -Wed Jul 19 13:15:32 1995 Kung Hsu - - * remote.c (remote_wait): When getting registers, check endianess and - do conversion if necessary. - -Tue Jul 18 00:41:31 1995 Jeff Law (law@snake.cs.utah.edu) - - * gdbserver/low-hppabsd.c: New file. - * gdbserver/Makefile.in (SFILES): Add low-hppabsd.c. - * config/pa/hppabsd.mh (XDEPFILES): Add ser-tcp.o. - (GDBSERVER_DEPFILES): Add low-hppabsd.o. - * config/pa/hppaosf.mh: Likewise. - -Mon Jul 17 21:35:18 1995 Fred Fish - - * dache.c (struct dcache_block): Change data member from unsigned - char to char, since everything passed in and out of dcache is char - or casted to appropriate type anyway. - (dcache_alloc): Move assignment of db out of test and combine - separate tests into if-else. - (dcache_peek_byte): Change ptr from unsigned char* to char*. - (dcache_peek_byte): Remove now unnecessary cast in read_memory call. - (dcache_peek): Change cast of incoming data arg. - (dcache_poke): Change cast of addr of incoming data arg. - (dcache_info): Mask data passed to printf_filtered to lsbyte only. - (dcache_info): Change printf_filtered arg from "% 2x" to " %2x". - * target.c (debug_to_thread_alive): Change return type to int and - return zero, for type compatibility with other *_thread_alive - funcs. - (cleanup_target): Change cast of ignore function to match type of the - to_thread_alive member. - * defs.h (error_hook): Add ATTR_NORETURN. - * defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to - __attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug. - * remote.c (remote_wait): Cast first arg to strtol, strchr, and - strncmp to "const char *" from "unsigned char *". - (remote_wait): Cast arg to putpkt and strcpy from "unsigned char *" - to "char *". - (remote_wait): Change printf format for long arg from "%d" to "%ld". - (getpkt): Remove unused variable "bp". - (remote_fetch_word, remote_store_word): Ifdef out apparently unused - functions. - * breakpoint.c (watchpoint_check): Removed unused variables - "saved_level" and "saved_frame". - * valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and - default cases to switch for completeness. - * infrun.c (wait_for_inferior): Enclose "have_waited" label - in #ifdef that matches the one in which it is referenced. - * ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise - unused variable "state" in #ifdef that matches one in which it is - referenced. - * eval.c (evaluate_subexp_standard): Remove unused variable "var". - * eval.c (evaluate_subexp_standard): Remove unused variable - "tmp_symbol". - * valarith.c (value_subscript): Remove unused variable - "lowerbound", which is redeclared in a nested scope prior to use. - * printcmd.c (print_frame_nameless_args): Use "%ld" to print long - arg, not "%d". - * {mem-break.c, remote-pa.c, remote.c, saber.suppress}: - Remove unused static var "check_break_insn_size". - * buildsym.c (finish_block): Add other enum LOC_* and default - cases to switch for completeness. - ch-lang.c (type_lower_upper): Removed unused label "retry". - Add other enum TYPE_* and default cases to switch for completeness. - * f-typeprint.c (f_type_print_args): Ifdef out unused function - that may be used someday when Fortran support is complete. - * ch-valprint.c (chill_print_type_scalar): Add other enum - TYPE_* and default cases to switch for completeness. - (chill_val_print): Remove unused local var "high_bound" that - is redeclared in a nested scope prior to use. - (chill_var_print): Use "%ld" to print long arg, not "%d". - * regex.c (re_compile_fastmap, re_match_2): Add remaining enum - types and default to switches for completeness. - * minsyms.c (lookup_minimal_symbol_text): Delete unused variable - "trampoline_symbol". - (prim_record_minimal_symbol_and_info): Return NULL rather than - trash. - * elfread.c (elf_symtab_read): Don't dereference NULL returns from - record_minimal_symbol_and_info. - * f-lang.c (saved_function_list_end): Ifdef out unused variable - that may be used someday. - * f-valprint.c (f_val_print): Remove unused local "straddr". - -Mon Jul 17 13:08:00 1995 Ian Lance Taylor - - * stabsread.h (struct stab_section_list): Define. - (coffstab_build_psymtabs): Remove staboff and stabsize parameters. - Add textaddr, textsize, and stabs parameters. - * gdb-stabs.h (struct dbx_symfile_info): Remove text_sect field. - Add text_addr and text_size fields. - (DBX_TEXT_SECT): Don't define. - (DBX_TEXT_ADDR, DBX_TEXT_SIZE): Define. - * coffread.c: Include . - (struct coff_symfile_info): Remove stabsect and stabindexsect - fields. Add textaddr, textsize, and stabsects fields. - (coff_locate_sections): Record the address of the .text section, - and total the sizes of all sections with names beginning with - ".text". Don't bother to record a .stab.index section (COFF - doesn't use them). Make a linked list of all sections with names - beginning with ".stab". - (coff_symfile_read): Adjust call to coffstab_build_psymtabs for - new parameters. - * dbxread.c (dbx_symfile_read): Use DBX_TEXT_ADDR and - DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT. - (dbx_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not - DBX_TEXT_SECT. - (elfstab_build_psymtabs): Likewise. - (stabsect_build_psymtabs): Likewise. - (symbuf_sections, symbuf_left, symbuf_read): New static variables. - (fill_symbuf): If symbuf_sections is not NULL, read symbols from - multiple sections. - (coffstab_build_psymtabs): Remove staboffset and stabsize - parameters. Add textaddr, textsize, and stabsects parameters. - Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not DBX_TEXT_SECT. Handle - multiple stabs sections. - * os9kread.c (os9k_symfile_read): Use DBX_TEXT_ADDR and - DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT. - (os9k_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not - DBX_TEXT_SECT. - - * remote-vx.c (vx_ops, vx_run_ops): Initialize new to_thread_alive - field. - -Sat Jul 15 01:02:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: New files - for OSF/1-3.x procfs support. - * configure.in (alpha-dec-osf): Use them when configuring - for OSF/1-3.x. - * configure: Updated. - * target.c: Include . - -Fri Jul 14 16:16:56 1995 J.T. Conklin - - * Makefile.in, configure.in: Use one variable, frags, to hold - pathnames of makefile fragments. - * configure: regenerated. - -Fri Jul 14 09:49:47 1995 Jeff Law (law@snake.cs.utah.edu) - - * procfs.c (procfs_ops): Fix typo in last change. - -Thu Jul 13 13:42:38 1995 Jeffrey A. Law - - * inftarg.c (child_thread_alive): New function to see if a - particular thread is still running. - (child_ops): Add child_thread_alive entry. - * remote.c (remote_thread_alive): New function to see if a - particular thread is still alive. - (remote_ops): Add remote_thread_alive. - * target.c (dummy_target): Add dummy entry for thread_alive. - (cleanup_target): de_fault thread_alive too. - (update_current_target): INHERIT thread_alive too. - (debug_to_thread_alive): New function. - (setup_target_debug): Add debug_to_thread_alive. - * target.h (struct target_ops): Add to_thread_alive. - (target_thread_alive): Define. - * thread.c (info_threads_command): Don't call kill; use - target_thread_alive instead. - * config/nm-lynx.h (CHILD_THREAD_ALIVE): Define. - * gdbserver/low-lynx.c (mythread_alive): New function. - (mywait): Don't restart any threads after a new thread notification, - let the generic code handle it. - * gdbserver/low-sparc.c (mythread_alive): Dummy version. - * gdbserver/low-sun3.c (mythread_alive): Likewise. - * gdbserver/server.c (main): Handle thread_alive requests. - * gdbserver/server.h (mythread_alive): Declare. - * corelow.c (core_ops): Add dummy entry for thread_alive. - * exec.c (exec_ops): Likewise. - * m3-nat.c (m3_ops): Likewise. - * monitor.c (monitor_ops): Likewise. - * procfs.c (procfs_ops): Likewise. - * remote-arc.c (arc_ops): Likewise. - * remote-array.c (array_ops): Likewise. - * remote-e7000.c (e7000_ops): Likewise. - * remote-es.c (es1800_ops, es1800_child_ops): Likewise. - * remote-mips.c (mips_ops): Likewise. - * remote-pa.c (remote_hppro_ops): Likewise. - * remote-sim.c (gdbsim_ops): Likewise. - * sparcl-tdep.c (sparclite_ops): Likewise. - -Tue Jul 11 11:15:55 1995 Kung Hsu - - * solib.c: Add _DYNAMIC__MGC base symbol for Mentor Graphics Inc. - * solib.c (match_main): New function for checking name of main. - * solib.c (solib_add): Not to add if solib match main. - -Fri Jul 7 14:41:56 1995 Kung Hsu - - * elfread.c (elf_symtab_read): Fix a bug ignoring compiler - generated internal labels ($LM...). - -Wed Jul 5 11:38:36 1995 Kung Hsu - - * defs.h: if __GO32__ or WIN32 the directory separating symbol should - be '\' not '/'. - - * remote-nindy (nindy_wait): Use infinite timeout reading after - esacpe character. - -Tue Jul 4 10:30:22 1995 Jeffrey A. Law - - * infrun.c (wait_for_inferior): When switching from one thread to - another, save infrun's state for the old thread and load infrun's - previous state for the new thread. - * thread.c (struct thread_info): Add new fields for thread specific - state saved/restored in infrun.c. - (add_thread): Initialize new fields. - (load_infrun_state): New function. - (save_infrun_state): New function. - * thread.h (load_infrun_state): Provide external decl. - (save_infrun_state): Likewise. - - * infrun.c (wait_for_inferior): When we hit a breakpoint for the - wrong thread, make sure to write the fixed PC value into the thread - that stopped. Restart all threads after single stepping over a - breakpoint for a different thread. - * breakpoint.c (set_momentary_breakpoint): Make momentary - breakpoints thread specific in a multi-threaded program. - * lynx-nat.c (child_resume): Add some comments. Correctly - choose between the single and multi-threaded step and continue - ptrace calls. - -Fri Jun 30 16:15:36 1995 Stan Shebs - - * config/h8300/h8300.mt: Renamed from h8300hms.mt. - * config/h8500/h8500.mt: Renamed from h8500hms.mt. - * config/z8k/z8k.mt: Renamed from z8ksim.mt. - * configure, configure.in: Update to reflect renamings. - - * remote-sim.c (sim): New command, passes commands to simulator. - (simulator_command): New function. - (gdbsim_ops): Clean up. - * remote-sim.h (sim_do_command): Declare. - * sh-tdep.c (memory_size): Remove command. - - * Makefile.in (SIM, SIM_OBS): New variables. - (CLIBS, CDEPS): Add value of SIM. - (DEPFILES): Add value of SIM_OBS - - * config/arm/arm.mt, config/h8300/h8300.mt, config/h8500/h8500.mt, - config/sh/sh.mt, config/sparc/sp64sim.mt, config/w65/w65.mt, - config/z8k/z8k.mt: Remove simulator files from TDEPFILES, - define in SIM_OBS and SIM. - config/sparc/sp64sim.mt (SIMFILES): Remove. - - * remote-z8k.c: Remove, was superseded by remote-sim.c - * Makefile.in, mpw-make.in: Remove references to remote-z8k.c. - -Sun Jun 25 15:30:43 1995 Stan Shebs - - * remote.c (remote_read_bytes, remote_write_bytes): Second arg - should be char *, not unsigned char *. - * dcache.h (memxferfunc): Ditto. - * monitor.c (monitor_write_memory, monitor_read_memory_single): - Ditto. - (monitor_make_srec): Let compiler figure size of hextab. - -Sat Jun 24 19:27:37 1995 Jeffrey A. Law - - * lynx-nat.c (child_wait): Don't restart new threads and loop - to the top of child_wait; let the machine independent code in - wait_for_inferior deal with new thread notifications. - -Fri Jun 23 11:51:58 1995 Kung Hsu - - * remote-nindy (nindy_load): Put in target specific load, it's - 20 times faster. - -Thu Jun 22 20:21:59 1995 Stan Shebs - - * utils.c (error): Move local `args' outside conditional, - move local `string1' inside, declare function as void if - non-ANSI compiler, dereference error_hook when calling. - - * mac-xdep.c (stdarg.h): Don't include. - -Thu Jun 22 13:12:33 1995 Kung Hsu - - * remote-nindy.c (nindy_wait): Change timeout in SERIAL_READCHAR. - -Wed Jun 21 13:24:41 1995 Jeff Law (law@snake.cs.utah.edu) - - * hppam3-nat.c: Change HP800_THREAD_STATE to TRACE_FLAVOR and - HP800_THREAD_STATE_COUNT to TRACE_FLAVOR_SIZE. - -Wed Jun 21 05:57:56 1995 Steve Chamberlain - - * monitor.c: Turn on caching. - (monitor_printf): If a ^C was sent, don't expect to see its - echo. - (monitor_open): Enable caching. - (monitor_resume, monitor_load): Flush cache. - (monitor_xfer_memory): Call cache routine. - (monitor_dump_regs): New. - (monitor_fetch_registers): If monitor_dump_regs available - then use it. - (monitor_load): Don't ref exec_bfd if it's NULL. - (monitor_load_srec): Use new monitor_make_srec calling convention. - (monitor_make_srec): Rewrite to cope with two, three and four byte - addresses. - * remote-hms.c (hms_cmds): Initialze end-of-command delim. - * dcache.h, dcache.h: Rewritten. - * remote.c: Reenable caching. - (getpkt): Reduce MAX_TRIES to 3. - (remote_xfer_memory): Use dcache_xfer_memory. - * defs.h (error_hook): New. - * top.c (error_hook): New definition. - * utils.c (error): Use error_hook if initialized. - * sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use - HAVE_SOCKETS in place of #ifndef GO32. - -Tue Jun 20 22:17:44 1995 Jeff Law (law@snake.cs.utah.edu) - - * config/pa/tm-hppa.h (PSW_*): Define processor status word masks. - (INSTRUCTION_NULLIFIED): Allow specific targets to override. - * config/pa/tm-hppao.h (INSTRUCTION_NULLIFIED): Define to work - around losing mach kernel behavior. - -Tue Jun 20 12:03:36 1995 Stan Shebs - - * monitor.c (monitor_wait): Don't use the watchdog timeout - if its value is 0. - * w89k-rom.c (w89k_open): Define to be static. - -start-sanitize-gdbtk -Tue Jun 20 10:19:40 1995 Stu Grossman (grossman@cygnus.com) - - * gdbtk.c: Add functions Tcl_Malloc, Tcl_Realloc, and Tcl_Free. - - * gdbtk.tcl (add_breakpoint_frame): Add more fields. - * (create_file_win create_asm_win build_framework): Create null - bindings for meta keys to keep window from dropping down to - insertion point when meta is pressed by itself. New bindings: - Up/Down - Scroll up/down one line at a time - Next/Prior - Scroll up/down one page at a time - Home/End - Warp to current pc/end of file - * (build_framework): Turn on breakpoint menu. - * (create_command_window): Implement tab completion. Add binding - for ^C to stop target. -end-sanitize-gdbtk - -Sat Jun 17 10:17:16 1995 Jeff Law (law@snake.cs.utah.edu) - - * somsolib.c (som_solib_add): Validate regexp argument. - Don't assume the first entry on dld's library list is the main - program. Don't load the same library more than once and don't - consider the main program a shared library. - (som_solib_sharedlibrary_command): New function - (_initialize_som_solib): Add "sharedlibrary" command. - -Thu Jun 15 14:54:58 1995 Stan Shebs - - * array-rom.c: Remove, no longer used. - - * remote-hms.c (hms_open): Make static. - - * mpw-config.in (MacSerial.h): Copy from version in {CIncludes}, - not {MPW}Interfaces:CIncludes. - * ser-mac.c (mac_baud_rate_table): Fix value for 38400 baud. - -Wed Jun 14 14:27:07 1995 Per Bothner - - * ch-exp.y: Remove lots of unsupported productions and names. - Add support for IF-expressions, ORIF, ANDIF, NUM, and ADDR. - -Tue Jun 13 21:40:11 1995 Per Bothner - - * parser-defs.h (enum precedence): Added PREC_BUILTIN_FUNCTION. - * expression.h (enum exp_opcode): Added UNOP_LOWER, UNOP_UPPER, - UNUP_LENGTH. - * expprint.c (dump_expression): Handle the new exp_opcodes. - (print_subexp): Handle PREC_BUILTIN_FUNCTION. - (print_simple_m2_func): Removed. - (print_subexp): Remove support for Modula2 builtin functions. - * m2-lang.c (m2_op_print_tab): Add support for builtin functions. - * ch-exp.y: Parse LOWER, UPPER, and LENGTH builtins. - (write_lower_upper_value): Convenience function for LOWER and UPPER. - (upper_lower_argument, length_argument): Removed non-terminals. - * ch-lang.c (chill_op_print_tab): Entries for UPPER, LOWER, LENGTH. - (type_lower_upper): New function. Calculate LOWER/UPPER of type. - (value_chill_length): New function. Calcalate LENGTH of ARRAY/STRING. - (evaluate_subexp_chill): Handle UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH. - -Mon Jun 12 12:48:13 1995 Stan Shebs - - Windows support bits from Steve Chamberlain . - * defs.h: Don't declare strchr and friends if WIN32. - (DIRNAME_SEPARATOR): Move here from source.c. - (SLASH_P, SLASH_CHAR, SLASH_STRING, ROOTED_P): New macros, - symbolic definitions for filename bits. - * top.c (cd_command): Use these. - * source.c (mod_path, openp): Ditto. - * terminal.h: Disable termio/sgtty definitions if WIN32. - * findvar.c (registers_changed): Call registers_changed_hook - if it is defined. - -Mon Jun 12 12:22:05 1995 J.T. Conklin - - * Makefile.in (distclean, realclean): Remove config.cache and - config.log. - -Mon Jun 12 00:21:59 1995 Jeff Law (law@snake.cs.utah.edu) - - * somsolib.c: Include gdb-stabs.h. - (som_solib_section_offsets): Use SECT_OFF_XXX rather than 0, 1, - etc. Initialize offsets for RODATA & BSS too. - -Sat Jun 10 17:59:11 1995 Jeff Law (law@snake.cs.utah.edu) - - * hppa-tdep.c (frame_chain): Try to compensate for incomplete - register information in core files when backtracing. - -Fri Jun 9 14:51:38 1995 Stu Grossman (grossman@cygnus.com) - - * remote-nrom.c: Remove everything but download code. More - cleanups. - -Thu Jun 8 15:06:00 1995 Stu Grossman (grossman@cygnus.com) - - * defs.h maint.c monitor.c remote-mips.c remote.c: Add support - for `watchdog' variable. This allows the user to put an upper - limit on the amount of time that GDB will wait for the target to - return from a step or continue operation. This will primarily be - used for the testsuite, where it is difficult to come up with a - reasonable timeout for things like function calls, which can take - as long as three minutes under some circumstances. If the - watchdog timer expires, GDB will generate an error that looks like - `Watchdog has expired.', and will detach from the target. - - * remote-mips.c (mips_open): Setup initial frame from target. - Print it out so that user is told where the program is stopped - when they attach. - - * remote-nrom.c: Loads of cleanups. Use serial code to open - network connections. Use expect() to wait for response to - download command. - - * ser-tcp.c (tcp_open): Retry connection if we get ECONNREFUSED. - - * serial.c serial.h (serial_open serial_fdopen serial_close): - Allow users to open the same device multiple times. They all get - to share the same serial_t. This is about the only way to have - multiple active targets use the same device (for download and - debug). - - * sparcl-tdep.c: Keep #include away from GO32. - - * target.c: Add `targetdebug' variable. If this is non-zero, - then a special target is put at the top of the target stack which - will cause all calls through the target vector to have their args - and results printed out. - -Wed Jun 7 17:40:37 1995 Per Bothner - - * ch-exp.y: Handle "->" . - -Wed Jun 7 17:46:33 1995 Michael Meissner - - * mem-break.c (LITTLE_BREAKPOINT): If BREAKPOINT and - {LITTLE,BIG}_BREAKPOINT are all defined, don't redefine. - (BIG_BREAKPOINT): Ditto. - - * config/rs6000/tm-rs6000.h (BREAKPOINT): Define as either - BIG_BREAKPOINT or LITTLE_BREAKPOINT depending on the target byte - order. - -Wed Jun 7 12:41:42 1995 Jeff Law (law@snake.cs.utah.edu) - - * somsolib.c (som_solib_section_offsets): Handle relative pathnames. - - * hppa-tdep.c (frame_saved_pc): Handle backtracing through signal - handler in dynamically linked executables. - -Tue Jun 6 10:44:25 1995 Michael Meissner - - From Andrew Cagney - * rs6000-tdep.c (single_step): Handle both little and big endian - breakpoints. - (gdb_print_insn_powerpc): Deal with disassembling both little and - big endian PowerPC systems. - (_initialize_rs6000_tdep): Use gdb_print_insn_powerpc to handle - disassembly, rather that assuming big endian order. - - * config/rs6000/tm-rs6000.h (BREAKPOINT): Delete. - (BIG_BREAKPOINT): Define, big endian breakpoint instruction. - (LITTLE_BREAKPOINT): Define, little endian breakpoint instruction. - -Sat Jun 3 01:54:56 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * README: Add note about Unixware 2.x. - - * dbxread.c (process_one_symbol): Check for exact symbol name - match when fixing up N_GSYM and N_STSYM symbols from Sun acc. - - * valprint.c (value_print_array_elements): Use - fprintf_filtered to put out `', - from schwab@issan.informatik.uni-dortmund.de (Andreas Schwab). - - * value.h (struct value): Change `repetitions' field from - `short' to `int' type. - -start-sanitize-arc -Fri Jun 2 11:17:23 1995 Doug Evans - - * arc-tdep.c (arc_bfd_mach_type): New static global. - (codestream_fill): Handle byte order differences. - (setup_prologue_scan): Don't read stdarg function's "sub sp,sp,N". - (arc_get_frame_setup): Read it here. - (arc_frame_saved_pc): And here. - (arc_print_insn): New function. - (arc_set_cpu_type): Set arc_bfd_mach_type. Don't set tm_print_insn. - (_initialize_arc_tdep): Set tm_print_insn to arc_print_insn. -end-sanitize-arc - -Wed May 31 12:04:01 1995 J.T. Conklin - - * nlm/{configure.in, Makefile.in}: Converted to use autoconf. - * nlm/configure: New file, generated with autoconf 2.3. - - * nlm/configure.in: Use sed instead of awk to get the value of - cpufile. Awk is not a utility required by the GNU coding - standards. This change also fixes the rigid whitespace - requirements that were required for awk. - - * sparclite/aload.c: Use a file descriptor instead of a stdio - stream for i/o with target board. - Use #error if HAVE_TERMIOS is not defined. - - * sparclite/{Makefile.in, configure.in}: Converted to use - autoconf. - * sparclite/configure: New file, generated with autoconf 2.3. - -Sun May 28 23:10:07 1995 Jeff Law (law@snake.cs.utah.edu) - - * defs.h: Include either varargs.h or stdarg.h (for va_list). - Fix stupid thinko in last change ("..." -> "va_list"). - - * defs.h (vprintf_filtered declaration): Add PARAMS prototype; - gcc-2.5 chokes on format attributes for unprototyped functions. - (vfprintf_filtered declaration): Likewise. - (vprintf_unfiltered declaration): Likewise. - (vfprintf_unfiltered). Likewise. - -Sat May 27 23:54:17 1995 J.T. Conklin - - * configure.in: Use sed instead of awk to get the values of - hostfile, targetfile and nativefile. Awk is not a utility - required by the GNU coding standards. This change also - fixes the rigid whitespace requirements that were required - for awk. - * configure: regenerated. - -Sat May 27 16:24:04 1995 Angela Marie Thomas - - * sparclite/{Makefile,configure}.in: Add hooks for building with - -lsocket & -lnsl for solaris2. Don't build aload/eload for DOS. - -Thu May 25 12:46:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdbserver/remote-utils.c (prepare_resume_reply): Add FIXME - comment regarding signal numbering. - -Wed May 24 15:49:47 1995 Steve Chamberlain - - * arm-tdep.c (_initialize_arm_tdep): Use print_insn_little_arm - now. - - * arm-tdep.c (convert_from_extended, convert_to_extended): - New. - * coffread.c (enter_linenos): Return if linetab 0. - * config/arm/arm.mt (TDEPFILES): Add simulator support. - * config/arm/tm-arm.h (FRAME_FIND_SAVED_REGS): Fix prototypes. - -Mon May 22 19:37:21 1995 Rob Savoye - - * config/idt.mt: replace monitor and array-rom with the new - remote-array. - -Mon May 22 15:38:25 1995 Stu Grossman (grossman@cygnus.com) - - * remote-nindy.c: Install Kung patch for PR 6820. I have no idea - what this does... - - * breakpoint.c: Move defaults of watchpoint related macros into - target.h. - * target.h: Macros from breakpoint.c. Conditionalize based on - TARGET_HAS_HARDWARE_WATCHPOINTS. - * i386v-nat.c procfs.c: Use TARGET_HAS_HARDWARE_WATCHPOINTS - instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint - code. - * config/i386/nm-linux.h, config/mips/nm-irix4.h, - config/pa/nm-hppab.h, config/sparc/tm-sparclite.h: #define - TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code. - -Mon May 22 06:47:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * breakpoint.c, target.h: Move defaults of watchpoint related - macros back to breakpoint.c. Required to get GDB compiling - on Solaris again. - -Fri May 19 14:49:37 1995 J.T. Conklin - - * defs.h (ATTR_FORMAT): New macro, expands to gcc's format - attribute when compiled by gcc. - * defs.h, language.h, monitor.h: Changed many function - declarations to use ATTR_FORMAT. - - * breakpoint.c (delete_command); source.c (directory_command); - top.c (define_command): Changed call to query() that had too - many arguments. - * printcmd.c (address_info): Changed call to printf_filtered() - that had too many arguments. - -Fri May 19 09:52:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * infrun.c (wait_for_inferior): Move assignments to stop_signal - and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they - were--after the switch statement on w.kind. You can't read the - registers of an inferior which has exited. Use a goto in the - STOPPED_BY_WATCHPOINT code. - * infrun.c (wait_for_inferior): Reinstate - HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code. - -Fri May 19 06:15:40 1995 Jim Kingdon - - * utils.c, complaints.c, language.c, monitor.c, remote-array.c, - remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of - stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it - must match the definition of PARAMS. -start-sanitize-gdbtk - * gdbtk.c: Likewise. -end-sanitize-gdbtk - -Thu May 18 15:58:46 1995 J.T. Conklin - - * utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered, - printf_filtered, printf_unfiltered, printfi_filtered, query, warning, - error, fatal, fatal_dump_core): Use stdarg.h macros when compiling - with an ANSI compiler. - * complaints.c (complain): Likewise. - * language.c (type_error, range_error): Likewise. - * monitor.c (monitor_printf, monitor_printf_noecho): Likewise. - * remote-array.c (printf_monitor, debuglogs): Likewise. - * remote-mips.c (mips_error): Likewise. - * remote-os9k.c (printf_monitor): Likewise. - * remote-st.c (printf_stdebug): Likewise. -start-sanitize-gdbtk - * gdbtk.c (gdbtk_query): Likewise. -end-sanitize-gdbtk - - * defs.h, complaints.h, language.h, monitor.h: Add prototypes to - match above changes. - - * printcmd.c: Remove uneeded #include . - * remote-e7000.c: Likewise. - - * f-typeprint.c (f_type_print_base): Fix typo found by above - changes. - -Wed May 17 11:21:32 1995 Jim Kingdon - - * Makefile.in (xcoffread.o): Depend on partial-stab.h. - - * xcoffsolib.c (sharedlibrary_command): New command. - * xcoffsolib.c (solib_info): Call xcoff_relocate_symtab. - * xcoffsolib.c: Miscellaneous cleanups. - - * partial-stab.h: Ignore symbol descriptor '-' (for local - variables with negative type numbers) without complaint. - - * rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own - local emulation thereof. Remove unused variable ostart. - -Wed May 17 15:55:53 1995 J.T. Conklin - - * Makefile.in (config.status): changed target so that - config.status --recheck is executed if configure script changes. - - * monitor.c (monitor_printf): Changed format specification in - error message to work with pre-ansi compilers. - (monitor_load_srec): reduced length of s-records from 128 to 32 - bytes so download is more reliable with the rom68k monitor. - - * rom68k-rom.c: Added trailing space to prompt string. - - * config/i386/xm-i386sco.h (HAVE_STRSTR): Removed. - * config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING): - Removed. - * defs.h, config/{xm-lynx.h, xm-nbsd.h}, - config/i386/{xm-i386bsd.h, xm-linux.h}, - config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h, - config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo - (PSIGNAL_IN_SIGNAL_H): Removed. - -Tue May 16 13:16:06 1995 J.T. Conklin - - * Makefile.in (Makefile): Added config.status to dependency list. - - * configure.in: Added INIT-CMDS argument to AC_OUTPUT which sets - gdb_host_cpu, gdb_target_cpu and nativefile. - * configure: regenerated. - -Mon May 15 23:50:51 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * mdebugread.c (parse_symbol): Do not relocate stBlock/scText - symbols, their value is the displacement from the procedure address. - * top.c (init_main): Add missing newlines to help strings for - `if' and `while' commands, fix help string for `show commands'. - -Mon May 15 18:37:56 1995 Stu Grossman (grossman@cygnus.com) - - * breakpoint.c: Move defaults of watchpoint related macros into - target.h. Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of - constants. - * infrun.c (wait_for_inferior): Enhance comment near - STOPPED_BY_WATCHPOINT. - * target.h: Macros from breakpoint.c. - -Mon May 15 17:11:38 1995 J.T. Conklin - - * config/i386/{i386sol2.mh, i386v4.mh, ncr3000.mh}, - config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh, - mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured - out by autoconf. - * config/apollo68v.mh (RANLIB): Removed, figured out by autoconf. - - * Makefile.in, configure.in: Converted to use autoconf - * aclocal.m4: New file, local autoconf macro definitions. - * configure: New file, generated with autoconf 2.3. - -Mon May 15 14:46:41 1995 Stan Shebs - - * remote.c (remote_kill): Add prototype. - * cpu32bug-rom.c (cpu32bug_open): Properly define as static. - * config/h8300/h8300hms.mt (TDEPFILES): Add monitor.o. - -Mon May 15 12:12:34 1995 Stu Grossman (grossman@cygnus.com) - - * sparclite/salib.c (win_ovf win_unf): Make window size constant - into a variable (__WINSIZE) so that it can be controlled via the - .h file. - * sparclite/sparclite.h: Add SL933 #ifdef to set __WINSIZE to 6 - for the 933 board. - - * infrun.c: Add #ifdef HP_OS_BUG to all references to - trap_expected_after_continue. - * (wait_for_inferior): Fix for remote watchpoints. Don't try to - insert breakpoints while target is running (this only works on - *some* native targets). This may also speed up native watchpoints - considerably. - -Sat May 13 13:55:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc), - mdebugread.c (struct symloc), hpread.c (struct symloc), - xcoffread.c (struct symloc): Fix inaccurate comment introduced - 20 Apr 1995. - -Sat May 13 13:34:18 1995 Jim Kingdon - - * rs6000-tdep.c (find_toc_address): Revise comment. - * symfile.c, symfile.h (init_psymbol_list): New function; - consolidate duplicated copies from os9kread.c, dbxread.c - and dwarfread.c. - * defs.h: Declare info_verbose. - * xcoffread.c: Extensive changes to support psymtabs. - -Fri May 12 13:48:41 1995 Stu Grossman (grossman@andros.cygnus.com) - - * cpu32bug-rom.c remote-est.c rom68k-rom.c: Update line_term element. - -Fri May 12 06:39:30 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * partial-stab.h: Expand comments. - -Thu May 11 19:01:37 1995 Jeff Law (law@snake.cs.utah.edu) - - * Support debugging using native MACH primitives on hppa*-*-osf*. - * configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore. - * config/pa/hppaosf.mh: New file. - * config/pa/nm-hppao.h: Likewise. - * hppam3-nat.c: Likewise. - * config/pa/tm-hppao.h (PSW_SS): Define for single-stepping. - (MACHINE_CPROC_*_OFFSET): Define. - (TRACE_*): Define. - (START_INFERIOR_TRAPS_EXPECTED): Delete definition. - -Wed May 10 18:59:26 1995 Stu Grossman (grossman@andros.cygnus.com) - - * hppa-tdep.c (read_unwind_info): Cosmetic cleanup. - * (unwind_command): Clean it up and make it print things out - nicer. - * monitor.c: Add ^C handling capability (mostly ripped off from - remote.c). - * (monitor_printf): Make it check the command echo. - * (monitor_printf_noecho): Similar to above, but doesn't check - for echo. - * (monitor_stop): No longer waits for prompt. That is the job of - the caller. This makes things work much better for monitor_wait, - which waits for the prompt itself. - * (monitor_open): Deal with new monitor_stop semantics. Also, - flush input after sending init strings to get rid of junk that may - be output. Also, don't always send \r to remote. Use - monitor_ops->line_term cuz proper character isn't always \r. - * (monitor_fetch_register): Switch to completely different - algorithm to deal with lame-ass monitors which put spaces in the - middle of numbers, and prompt with a space!!!!! - * (monitor_read_memory_single): New routine to be used with - monitors that can only return one byte/short/long at a time. This - is selected via MO_GETMEM_READ_SINGLE. - * (monitor_load_srec): Use monitor_printf_noecho for sending S - records. Most targets don't echo them. - * (monitor.h): Get rid of cmd_delim. Add line_delim. - * op50n-rom.c (op50n_cmds): Fill it up. Make it work. - * w89k-rom.c: Change all eols from \r to \n. Change load_resp to - ^Q to prevent error message. - * config/pa/tm-hppa.h (CALL_DUMMY (for hppro)): Add special - instruction sequence at end to make restore_pc_queue happy. - -Wed May 10 15:59:00 1995 Torbjorn Granlund - - * remote-est.c (est_open): Make static to match prototype. - -Tue May 9 16:58:50 1995 Michael Meissner - - * configure.in: Add little endian PowerPC support. - * config/powerpc/ppcle-eabi.mt: New file for little endian PowerPC - support. - * config/powerpc/tm-ppcle-eabi.h: ditto. - -Mon May 8 12:11:38 1995 J.T. Conklin - - * nlm/configure.in (gdb_host, gdb_host_cpu, gdb_target): Removed. - These variables not used. - - * config/m68k/monitor.mt (TDEPFILES): Added cpu32bug-rom.o. - -Wed May 3 17:54:47 1995 Stan Shebs - - * monitor.c (monitor_command): Don't use PROMPT until monitor - target is known to be open. - (monitor_make_srec): Don't define size of hextab. - -Tue May 2 18:32:24 1995 Stan Shebs - - * configure.in (--enable-netrom): New configuration option. - * Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append - value of NETROM_OBS. - (NETROM_OBS): New variable. - * remote-nrom.c: New file, NetROM target support. - * config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use - REMOTE_OBS instead of REMOTE_O. -start-sanitize-arc - * config/arc/arc.mt: Ditto. -end-sanitize-arc - -Fri Apr 28 23:30:00 1995 Stu Grossman (grossman@cygnus.com) - - * array-rom.c (_initialize_array array_open): Move baud_rate - initialization from _initxxx to array_open to fix bug with - overriding -b command line option. - -Thu Apr 27 20:29:34 1995 Doug Evans - - * Makefile.in (RUNTEST): Fix reference of `srcdir'. - -Wed Apr 26 19:01:08 1995 Steve Chamberlain - - * remote-hms.c: Rewrite to use new monitor conventions. - -Tue Apr 25 11:27:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * dbxread.c: Add comment explaining lowest_text_address. - Add comment regarding stringtab_global and psymtabs. - -Sat Apr 22 01:26:29 1995 Jeff Law (law@snake.cs.utah.edu) - - * config/pa/tm-hppa.h (EXTRACT_STRUCT_VALUE_ADDRESS): Fix. - - * config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Rewrite to correctly - handle "short", "int" and small structures returned in registers. - -Fri Apr 21 12:57:53 1995 Kung Hsu - - * minsyms.c: add new function lookup_minimal_symbol_text, to look - for text symbol only. - * breakpoint.c (create_longjmp_breakpoint): call - lookup_minimal_symbol_text instead of lookup_minimal_symbol. - * symtab.h: add lookup_minimal_symbol_text prototype. - -Fri Apr 21 12:03:44 1995 Stan Shebs - - * sh-tdep.c (sh-opc.h): Don't include. - (gdbcore.h): Include. - (frame_find_saved_regs): Remove unused local. - -Thu Apr 20 10:12:21 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * dwarfread.c (struct dwfinfo), dbxread.c (struct symloc), - mdebugread.c (struct symloc), hpread.c (struct symloc): Clean - up comments. - -Wed Apr 19 16:58:11 1995 Stu Grossman (grossman@andros.cygnus.com) - - * hppa-tdep.c (deposit_17): New routine to deposit 17 bit - constants into PA instructions. - * Put #ifdefs around all signal handling code. Not generally - needed for embedded boards. - * (hppa_fix_call_dummy): Parameterize offsets into call dummy to - allow different dummys to be used by this code. Use - INSTRUCTION_SIZE instead of REGISTER_SIZE for things. - Conditionalize setup of _sr4export fixup. Improve comments. - * config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different - call dummy if PA_LEVEL_0 is defined. Better comments for call - dummys. Define offsets for LDIL/LDO instructions which load - function addresses. - * config/pa/tm-pro.h: Get rid of signal handling stuff. Define - PA_LEVEL_0 to disable mucking with space regs and such. - -Mon Apr 17 15:37:08 1995 Stu Grossman (grossman@andros.cygnus.com) - - * cpu32bug-rom.c monitor.h op50-rom.c remote-est.c rom68k-rom.c - w89k-rom.c: Remove loadtypes, loadprotos and baudrates. - * op50-rom.c: Fix copyrights and add load routine to op50n_cmds. - * rom68k-rom.c (_initialize_rom68k): Don't set baud rate. - * w89k-rom.c: Fix copyrights. - -Sun Apr 16 14:00:55 1995 Stu Grossman (grossman@andros.cygnus.com) - - * monitor.c: Move all xmodem stuff into xmodem.[ch]. Remove - unnecessary remoteloadprotocol and remoteloadtype support. - * (expect expect_prompt): Change names to monitor_expect and - monitor_expect_prompt. Make them global. - * (printf_monitor): Change name to monitor_printf. Make global. - * (monitor_read_memory): Flush command echo to avoid parsing - ambiguity with CPU32Bug monitor. - * (monitor_load): Remove remoteloadprotocol and remoteloadtype - support. Call target_ops->load_routine, default to - monitor_load_srec. - * (monitor_load_srec): Remove everything but S-record support. - * monitor.h (monitor_ops): Add load_routine to provide monitor - specific download capability. - * remote-est.c: Clean up copyrights and comments. - * w89k-rom.c: Use new xmodem support. - * xmodem.c xmodem.h: New files to support xmodem downloads. - * rom68k-rom.c remote-est.c: Fix copyrights, add load_routine - entry to monitor_ops. - * cpu32bug-rom.c: New file to support Moto BCC debuggers. - * config/m68k/est.mt (TDEPFILES): Add cpu32bug.o. - * config/pa/hppapro.mt (TDEPFILES): Add xmodem.o. - -Sat Apr 15 18:00:15 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * rem-multi.shar: Removed; superceded by gdbserver. - -Fri Apr 14 12:10:24 1995 Jim Kingdon - - * xcoffread.c (xcoff_sym_fns): Revise comment about merging this - with coffread.c. - - * breakpoint.c (fixup_breakpoints): Removed. - * rs6000-nat.c (vmap_symtab): Don't call fixup_breakpoints. - (vmap_ldinfo, xcoff_relocate_core): Call breakpoint_re_set. - - * coffread.c (coff_symfile_offsets): Allocate SECT_OFF_MAX - sections, not just SECT_OFF_MAX-1. - - * rs6000-nat.c (vmap_symtab), xcoffread.c: Re-do section offsets - to be indexed by SECT_OFF_* instead of xcoff section numbers. - * objfiles.c, remote.c: Remove comments regarding SECT_OFF_*. - * symtab.h: Revise comment about block_line_section. - * rs6000-nat.c (vmap_symtab): Don't relocate objfile->sections. - -Sat Apr 15 14:15:14 1995 Stan Shebs - - * mpw-make.in (init.c): Don't try to do symbolic {o} in sed - command, not allowed by some version of MPW Make. - * ser-mac.c (mac-setbaudrate): Make it actually set baud rates. - -Sat Apr 15 14:05:09 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * alpha-tdep.c (alpha_push_arguments): Fix typo (TYPE_VALUE -> - VALUE_TYPE). Do the cast for TYPE_CODE_BOOL, TYPE_CODE_CHAR, - TYPE_CODE_ENUM, and TYPE_CODE_RANGE as well as TYPE_CODE_INT. - -Sat Apr 15 14:04:32 1995 Per Bothner - - * alpha-tdep.c (alpha_push_arguments): Only cast to long for - TYPE_CODE_INT. - -start-sanitize-gdbtk -Sat Apr 15 13:52:24 1995 Stan Shebs - - * gdbtk.c (gdb_disassemble): Read from inferior if connected - to a VxWorks target. - -Fri Apr 14 10:18:20 1995 Stu Grossman (grossman@cygnus.com) - - * README.GDBTK: New file. Contains the obvious. -end-sanitize-gdbtk - -Thu Apr 13 16:17:04 1995 Rob Savoye - - * remote-array.c: New file for Array Tech LSI33k based controller - board. - -Thu Apr 13 12:23:31 1995 Kung Hsu - - * a29k-tdep.c (get_longjmp_target): Replace SWAP_TARGET_AND_HOST with - extract_address. - * remote-vxsparc.c: New file, preliminary check in, this configuration - not supported yet. - * remote-vxmips.c: ditto. - -Thu Apr 13 12:10:14 1995 Michael Meissner - - * rs6000-tdep.c (xcoff_add_toc_to_loadinfo): Don't use a prototype - to declare the function. - -Wed Apr 12 16:40:20 1995 Stan Shebs - - * monitor.h (init_monitor_ops): Declare. - * rom68k-rom.c: Clarify some comments. - (rom68k_open): Define as static, to match decl. - -Wed Apr 12 16:36:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdb.gdb: New file. - * .gdbinit: Move list-objfiles to gdb.gdb. - - * values.c (set_internalvar): Set modifiable flag of newval. - -Wed Apr 12 14:34:31 1995 Jim Kingdon - - * xcoffread.c: Call complain() rather than error() or printing a - warning. - -start-sanitize-arc -Wed Apr 12 08:15:27 1995 Doug Evans - - * arc-tdep.c: #include "gdbcmd.h". - (codestream_seek): Pass CORE_ADDR. - (arc_cpu_type, tmp_arc_cpu_type, arc_cpu_type_table): New globals. - (debug_pipeline_p): Likewise. - (X_...): Instruction field access macros. - (BUILD_INSN): Define. - (codestream_tell): Allow for stream elements > 1 byte. - (codestream_fill): Likewise. - (setup_prologue_scan): New function. - (arc_get_frame_setup): Call it. Update to current spec - regarding prologues. Use BUILD_INSN. - (skip_prologue): New argument `frameless_p'. Use BUILD_INSN. - (arc_frame_saved_pc): New function. - (frame_find_saved_regs): Use BUILD_INSN. - (get_insn_type, single_step): New functions. - (one_stepped): New global. - (arc_set_cpu_type_command, arc_show_cpu_type_command): New functions. - (arc_set_cpu_type): New function. - (_initialize_arc_tdep): Define new `set' commands `cpu', - `displaypipeline', and `debugpipeline'. - * remote-arc.c (break_insn): Add bi-endian support. - (arc_insert_breakpoint): Likewise. - (arc_remove_breakpoint): Likewise. - (switch_command): Delete. - * arc/tm-arc.h (TARGET_BYTE_ORDER): Delete. - (TARGET_BYTE_ORDER_SELECTABLE): Define. - (DEFAULT_ARC_CPU_TYPE): Define. - (SKIP_PROLOGUE_FRAMELESS_P): Define. - (BREAKPOINT): Delete. - (BIG_BREAKPOINT, LITTLE_BREAKPOINT): Define. - (DECR_PC_AFTER_BREAK): Change to 8. - (NO_SINGLE_STEP): Define. - (ARC_PC_TO_REAL_ADDRESS): Define. - (SAVED_PC_AFTER_CALL): Use it. - (NUM_REGS, REGISTER_BYTES): Fix. - (FRAME_SAVED_PC): Call arc_frame_saved_pc. - (FRAME_LOCALS_ADDRESS): Fix. -end-sanitize-arc - -Tue Apr 11 16:42:37 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * top.c, utils.c, defs.h: Remove error_hook. It is currently - unused and would need to hook into error_begin()/return_to_top_level(), - instead of error(), if it were to be used. - -Tue Apr 11 13:46:25 1995 Jim Kingdon - - * utils.c, defs.h (warning_begin): Renamed from warning_setup, for - consistency with error_begin. Also print warning_pre_print. - Document it better. - * utils.c (warning): Use it. - * utils.c (error_begin): Doc fix. - * rs6000-nat.c (vmap_ldinfo): If we don't find ldinfo for the - symfile_objfile, nuke it. - -Tue Apr 11 09:35:20 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * printcmd.c (print_address_numeric): Pass use_local to - print_longest, rather than always passing 1. - - * nlm/Makefile.in: Remove comments discussing munch. - -start-sanitize-gdbtk -Tue Apr 11 11:07:12 1995 Michael Meissner - - * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, but - F_SETOWN is, use that. -end-sanitize-gdbtk - -Mon Apr 10 18:31:57 1995 Stan Shebs - - Merge in support for Mac MPW as a host. - (Old change descriptions retained for informational value.) - - * mpw-config.in (i386-unknown-go32): Change from aout. - (sh-hitachi-hms): New target. - * mpw-make.in (BISON): Use byacc instead of bison. - (VERSION): Bump to 4.14.1. - (*-pinsn.*): Remove mentions everywhere. - (all): Don't build MacGDB. - (gdb, SiowGDB): Depend on Version.r. - (Version.r): Generate from version info. - * main.c (main): Pass program name to START_PROGRESS, END_PROGRESS. - (main) [MPW]: Remove debugging hook. - * mac-xdep.c (debug_openp): New flag. - (mac_init): Set flag if env variable defined. - * ser-mac.c (mac_open): Clarify error message. - (mac_readchar): Call PROGRESS while looping. - (mac_write): Call sleep instead of sec_sleep. - (sec_sleep): Remove. - * source.c (openp) [MPW]: Only print debugging info if debugging. - * utils.c (query) [MPW]: Clarify that behavior is a bug. - - * mpw-make.in (init.c): Use open-brace instead of mpw-open-brace. - - * main.c, source.c: Remove hacks that replace long strings - with shorter ones, now solved portably. - - * config/m68k/xm-mpw.h (spin.h): Include. - (ALMOST_STDC): Only define if MPW_C. - * config/m68k/tm-mac.h: New file, Mac target definitions. - - * mpw-config.in (m68k-apple-macos, ppc-apple-macos, - i386-unknown-aout): New targets. - (mk.tmp): Add *DEPFILES definitions. - * mpw-make.in: Remove gC rules, clean up definitions for other - include files, bump version, fix bogus \ that should be \Option-d. - (init.c): Build correctly. - - * mpw-make.in (HFILES_NO_SRCDIR): Add somsolib.h - (ALLDEPFILES): Add somsolib.c. - (somsolib.o): Add some dependencies. - - * mpw-config.in: Use nm-empty.h if host is not target. - (xdepfiles): Add mac-xdep.c.o. - (xm_file): Remove. - * mpw-make.in: Add Fortran files. - (XDEPFILES): Remove. - - * mpw-config.in (MacSerial.h): Duplicate from standard Serial.h. - * ser-mac.c (MacSerial.h): Include instead of Serial.h. - - * mpw-make.in: Use {s} instead of {srcdir} everywhere. - (bindir, libdir): Remove extra colon. - (source.c): Compile with C instead of gC. - (c-exp.tab.c, ch-exp.tab.c, m2-exp.tab.c): Add {o}. - (install-only): Don't install MacGDB. - * source.c (openp) [MPW]: Add a debugging display. - (open_source_file) [MPW]: Use MPW basename finders. - [MPW_C]: Briefer versions of help for line and list commands. - - * mpw-make.in: Change references from paread.c to somread.c - - * mpw-make.in (VERSION): Update to 4.12.3. - (SiowGDB): New target, GDB using SIOW library. - (init-new.c): New target, attempt to generate init.c from sources. - (main.c.o, top.c.o): Put each in its own segment. - * main.c (main) [MPW]: Always call mac_init. - * utils.c (query) [MPW]: Always return "yes" if in MacGDB, output - an extra newline otherwise. - * mac-xdep.c: More comments in various places, remove junk. - (mac_init): Add tests for MPW and SIOW. - (use_wne, has_color_qd): Renamed. - (use_color_qd): New variable. - (grow_window): Only do console resizing to console window, - call resize_console_window. - (zoom_window): Call resize_console_window. - (resize_console_window, scroll_text): New functions. - (adjust_console_sizes): Always align viewrect to even multiples of - text lines. - (adjust_console_text): Always scroll by whole lines. - (hacked_vfprintf, hacked_puts, hacked_fputc, hacked_putc): Force a - recalculation of scroll positions if a newline was output. - (hacked_fflush): Similarly, for flushing. - (hacked_fgetc): New function, aborts if called in MacGDB. - * ser-mac.c (mac_readchar): Rename starttime to start_time, - remove debugging printf. - (mac_write): Sleep on first 4 writes. - (sec_sleep): New function, works like standard sleep. - * macgdb.r: Adjust positioning and contents of About box. - Set minimum size to 2000K, preferred size to 5000K. - * config/m68k/xm-mpw.h (fgetc): Define as a macro. - - * mpw-make.in (.c.o, .gc.o): Prefix segment names with gdb_. - (top.c.o, annotate.c.o): Add build rules. - * macgdb.r (SysTypes.r): Include. - ('vers'): New resource, version info. - (mFile, mEdit, mDebug): Enable all menu items. - (mDebug): Add key equivalents for continue, step, next. - (wConsole): Add zoom and close boxes to window. - * mac-xdep.c (new_console_window): New function, code taken from - mac_init. - (mac_command_loop): Use GetCaretTime for wait interval, call - do_idle on null events. - (do_idle): New function. - (zoom_window): Implement zooming. - (v_scroll_proc): New function, handles vertical scrolling. - (activate_window): Do activation of console window. - (do_menu_command): Implement items of file, edit, and debug menus. - (do_keyboard_command): Fix command extraction. - (adjust_console_sizes, adjust_console_text): New functions. - (hacked_fprintf, hacked_vfprintf, hacked_fputs, hacked_fputc, - hacked_putc): Don't call draw_console. - * ser-mac.c (mac_open): Add an error message for invalid ports. - (first_mac_write): New global. - (mac_write): Use first_mac_write to sleep on first several writes. - - * mpw-make.in (INCLUDE_CFLAGS): Add readline source dir. - (READLINE_CFLAGS, READLINE_SRC, READLINE_DIR): Uncomment. - (TSOBS): Don't compile inflow.c. - (all, install): Add MacGDB. - * main.c (main): Do Mac-specific init and command loop if a - standalone app, skip full option help message if compiling - with MPW C. - (gdb_readline): If MPW, add a newline after the (gdb) prompt. - * utils.c (_initialize_utils): If MPW, don't try to use termcap to - compute the window size. - * config/m68k/xm-mpw.h (printf, fprintf, fputs, fputc, putc, - fflush): Define as macros that expand into hacked_... versions. - (StandAlone, mac_app): Declare. - * macgdb.r (SIZE): Set the default partition to 4000K. - * mac-xdep.c (readline.h, history.h): Include. - (terminal.h): Don't include. - (mac_app): Define. - (gdb_has_a_terminal): Define Mac-specific version. - (do_keyboard_command): Simplify search for command string. - (readline): Define as gdb_readline. - Add other history/readline stubs to make main gdb link. - (hacked_fprintf, hacked_printf, hacked_vfprintf, hacked_fputs, - hacked_fputc, hacked_fflush): New functions, intercept output to - stdout and stderr, send to console window. - - * mpw-make.in (MacGDB): New target, standalone Mac-hosted gdb. - (XDEPFILES): Define. - (main.c.o): Compile with gC instead of C. - * mac-defs.h: New file, menu etc definitions shared between - C and Rez files. - * macgdb.r: New file, Rez (resource compiler) resource - definitions. - * mac-xdep.c: New file, Mac host interface code. - * config/m68k/xm-mpw.h (PATHNAME_SEPARATOR): Rename to - DIRNAME_SEPARATOR. - (PATHNAME_SEPARATOR_STRING): Remove. - (SIGQUIT, SIGHUP): Define. - (fileno, R_OK): Define. - - * mpw-config.in: New file, MPW configuration fragment. - * mpw-make.in: New file, MPW makefile fragment. - * config/m68k/xm-mpw.h: New file, MPW host definitions. - * ser-mac.c: New file, Mac serial interface. - -Mon Apr 10 16:47:57 1995 Kung Hsu - - * valprint.c (print_longest): Fix a syntax error in #ifdef - PRINTF_HAS_LONG_LONG. - - * config/mips/xm-irix5.h: turn on CC_HAS_LONG_LONG and - PRINTF_HAS_LONG_LONG. - * config/mips/tm-irix5.h: turn on FORCE_LONG_LONG. - -Sat Apr 8 02:47:45 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * mdebugread.c (parse_symbol): Use new variable - nodebug_var_symbol_type as type of variables which don't have any - ecoff debug info associated with them. - (parse_symbol, parse_procedure): Use heuristics to determine if - functions were compiled without debugging info and change their - type to nodebug_function_symbol_type. - (_initialize_mdebugread): Initialize nodebug_*_symbol_type. - - * source.c (line_info): Clear sal.pc for `info line' without - arguments. - -Fri Apr 7 17:43:01 1995 Stu Grossman (grossman@andros.cygnus.com) - - * monitor.c: make_xmodem_packet and print_xmodem_packet go away. - send_xmodem_packet shows up to do the obvious. Lots of fixes to - xmodem downloads including resetting of block number at start of - new transfers, fix for buffer overrun problem, addition of CRC - generation code. - * (monitor_open): loadtype_str and loadproto_str now default to - first entry in monitor_ops->loadtypes. - * (monitor_wait): Lengthen register dump buf, because of verbose - Winbond monitor. - * (monitor_fetch_register): Report unimplemented registers as 0. - * (monitor_read_memory): Only do 16 byte aligned transfers - because of formatting weirdness with the Winbond monitor. Also, - ignore non-hex, non-whitespace formatting between bytes (same - monitor). - * (monitor_load): Clean up logic. - * (monitor_load_srec): Re-do xmodem support. Move lots of it - into send_xmodem_packet. - * (getacknak): Get rid of polls and timeouts. Handle CRC - requests from receiver. - * (monitor_make_srec): Efficiency improvements. Don't call - sprintf to output two digit hex numbers. - * (crcinit, docrc): New, CRC-16 support routines. - * (send_xmodem_packet): New routine to generate either CRC-16 or - checksummed xmodem packets. - - * remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes): - Reduce tables down to only the load types supported by each - monitor. - - * w89k-rom.c (w89k_supply_register): Parses output of Winbond - register dumps. - * (w89k_loadtypes, w89k_loadprotos): Reduce to just srec/xmodem. - * (w89k_cmds): Add clear all breakpoints, memory fill, and dump - registers commands. - - * config/pa/tm-hppa.h: Define lots register offsets needed by - w89k-rom.c. - - -Thu Apr 6 17:00:46 1995 Michael Meissner - - * Makefile.in (X11_INCLUDES): Define as empty. - (X11_CFLAGS): Define as including $(X11_INCLUDES). - (X11_LIB_SWITCHES): Define as empty. - (X11_LIBS): Define as -lX11. - -start-sanitize-gdbtk - * configure.in (enable_gdbtk): If gdbtk, support the --x-includes - and --x-libraries switches, setting the X11_INCLUDES and - X11_LIB_SWITCHES respectively. Instead of using a hardcoded -lX11 - in ENABLE_CLIBS, use the X11_LIB_SWITCHES and X11_LIBS variables. - - * gdbtk.c (gdbtk_init): If SIOCSPGRP is not available, don't use - it. This means that the stop button doesn't work, but is better - than nothing. -end-sanitize-gdbtk - -Wed Apr 5 19:57:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * mips-tdep.c (mips_print_register): Remove unused variable - our_type and call to init_type. Fixes memory leak. Reindent function. - - * mips-tdep.c (mips_print_register), findvar.c - (write_register_bytes): Make buffer char[] instead of unsigned - char[]. - -Mon Apr 3 19:28:14 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * top.c, utils.c, main.c, defs.h: Replace error_pre_print with two - variables: error_pre_print (for RETURN_ERROR) and quit_pre_print - (for RETURN_QUIT). Fixes a bug whereby typing ^C (e.g. in "maint - print sym") could output extraneous stuff. - * objfiles.c: Don't declare error_pre_print; defs.h does it. - -Mon Apr 3 13:48:28 1995 Stu Grossman (grossman@andros.cygnus.com) - - * monitor.h: Add MO_GETMEM_NEEDS_RANGE flag. - * monitor.c (monitor_read_memory): Use previously mentioned flag - to send proper format memory examine commands to the w89k monitor. - Also, try to handle bizarre format of memory dump... - - * op50-rom.c w89k-rom.c: Update to new monitor.[ch] conventions. - -Sat Apr 1 03:22:20 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: - Handle relocated symbol address. - * partial-stab.h, case N_SO, SOFUN_ADDRESS_MAYBE_MISSING: - Do not relocate a zero address. - -Thu Mar 30 19:46:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * config/a29k/tm-a29k.h: Nuke obsolete define CONTROL_END_ADDR; it - is nowhere used. - - * stabsread.c (read_range_type): Remove FIXME comment about - type-id (I presume this meant a number followed by = followed by a - type) versus type number; Per fixed it. - -Wed Mar 29 09:56:04 1995 Jason Molenda (crash@phydeaux.cygnus.com) - - * configure.in: sparc-*-sunos5* is same as sparc-*-solaris2*. - -Wed Mar 29 18:30:03 1995 Stan Shebs - - * remote-e7000.c (why_stop): Add new kinds of strings to expect - from the emulator. - (e7000_wait): Add interpretations for more stop reasons, - including warnings for write protect and cycle address errors. - -Wed Mar 29 17:09:29 1995 Stu Grossman (grossman@cygnus.com) - -start-sanitize-gdbtk - * Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate - locations (per-host) for X11 include files. - * config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force - the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs - of the R5 include files. -end-sanitize-gdbtk - * monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of - support for interrupting target. - * monitor.c (monitor_open): Send stop command before doing - anything else. - * (monitor_load_srec): Fix record size calculation to prevent end - of segment from getting trashed. - * rom68k-rom.c: Update to latest version of struct monitor_ops. - * config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order - problems. Makes DOS hosted function calling work. - * sparclite/crt0.s: Define _start to make COFF happy. - -Wed Mar 29 09:11:51 1995 Michael Meissner - - * defs.h (atof): Don't provide an external declaration if atof is - a macro. - -Wed Mar 29 00:01:07 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * rs6000-tdep.c (skip_prologue): Skip saving of LR and CR in - the stack frame, fix typos in `st rx,NUM(r1)' and `stu r1,NUM(r1)' - tests. - -Tue Mar 28 17:04:04 1995 Per Bothner - - * gdbtypes.c (create_range_type): If indextype has TYPE_FLAG_STUB - set, set TYPE_FLAG_TARGET_STUB. - (check_stub_type): Recalculate TYPE_LENGTH for range type. - * stabsread.c (read_range_type): If index type number is followed - by '=', back up, call read_type. and assume we have a true range. - * gdbtypes.h (TYPE_FLAG_TARGET_STUB): Update comment. - -Mon Mar 27 22:51:54 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * alpha-nat.c, irix4-nat.c, irix5-nat.c, mipsv4-nat.c, - sparc-tdep.c (supply_gregset, supply_fpregset): Fill inaccessible - registers with zero to handle recent read_register_bytes change. - * irix4-nat.c, irix5-nat.c, mipsv4-nat.c (supply_gregset, - fill_gregset): Fix handling of CAUSE_REGNUM. - * mips-nat.c (store_inferior_registers): Handle unwritable - registers when storing a single register. - * config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM): - Fix definitions. - - * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Clear - allocated mips_extra_func_info, if the debug info is corrupt, - the PDR to fill it in might be missing. - -Mon Mar 27 14:43:00 1995 Kung Hsu - - * vx-share/regPacket.h: a new file interfacing with vxworks. - -Sun Mar 26 13:22:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * breakpoint.c (bpstat_do_actions): Once we've executed the - commands, set bs->commands to NULL. - -Sat Mar 25 01:16:10 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * buildsym.c (patch_subfile_name): Update last_source_file - with the real source file name. - * dbxread.c (end_psymtab): Handle static functions in the - SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename - to lookup_minimal_symbol. - (process_one_symbol): Ignore extra outermost context from - SunPRO cc and acc. - * stabsread.c (define_symbol): Do not complain for SunPRO - static variable encoding if STATIC_TRANSFORM_NAME is defined. - * sparc-tdep.c, config/sparc/tm-sun4sol2.h - (sunpro_static_transform_name): Renamed from - solaris_static_transform_name. - * config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME): - Define to sunpro_static_transform_name for acc 3.0 compiled - executables. - * procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS): - Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults - if defined. - * procfs.c (info_proc_siginfo): Cast sip->si_addr to - `unsigned long' and use `lx' format for printing it. - -Fri Mar 24 15:45:42 1995 Stu Grossman (grossman@cygnus.com) - - * configure.in: Move test for m68*-est-* before m68*-*-coff*. - * findvar.c: Move default def of CANNOT_STORE_REGISTER closer to - the beginning of the code. - * (write_register_gen): New routine. Analogous to - read_register_gen. - * (write_register_bytes): Another rewrite! Make it smarter about - not updating regs with the same value. - * monitor.c (printf_monitor readchar): Use stderr instead of - stdout to output debug info. Also cleanup readchar a little. - * (expect): Make sure that excessive responses are null - terminated. - * (monitor_open): Check for magic number in monitor_ops struct. - Allow multiple commands as init strings. Also, clear all - breakpoints. - * (monitor_resume monitor_wait): Send a command to dump all the - regs for those targets which don't do so when waking up after a - continue command. - * (monitor_wait): Handle excessive response output better. - * (monitor_write_memory): Use block fill, word, and long word - commands (if they exist) to write memory more efficiently. - * General cleanups to use flag bits instead of individual flag - words in monitor_ops struct. - * (monitor_command): Return output from command. - * (monitor_load_srec): Allocate buffer only once. Use alloca. - Wait for load response string instead of using a timeout to start - sending S-records. Fix bug where value of srec_frame shrinks. If - hashmark is set, print `-' for retransmissions. General cleanups. - * (monitor_make_srec): Get rid of S-record default type kludge. - * monitor.h: Use seperate struct for memory and register - read/write commands. Memory commands can come in byte, word, - long, and longlong forms. - * (monitor_ops): Change lots of fields. Generalize some stuff. - Put all flags into flags word. Allow init to be a list of commands. - Add command for clearing all breakpoints, block fill, dumping all - registers. - * remote-est.c: Rewrite to use new monitor conventions. - * config/m68k/est.mt (TDEPFILES): Add monitor.o. - * config/m68k/tm-est.h: Set NUM_REGS to 18. - * testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test - more thoroughly. - -Thu Mar 23 23:20:00 1995 Jeff Law (law@snake.cs.utah.edu) - - * somsolib.c (som_solib_add): Handle case where a shared library - referenced by a core file has sections without the SEC_ALLOC bit - set (eg stabs sections). - -Thu Mar 23 15:07:08 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * breakpoint.c (bpstat_do_actions): For each element in the bpstat - chain, do all the commands regardless of whether they run the - inferior. - -Wed Mar 22 19:17:06 1995 Doug Evans - - * mem-break.c (LITTLE_BREAKPOINT, BIG_BREAKPOINT): Define as - BREAKPOINT if mono-endian. - (break_insn): Deleted. - (big_break_insn, little_break_insn): Define. - (memory_insert_breakpoint): Handle bi-endian cpus. - (BREAKPOINT_LEN): Define. - (memory_remove_breakpoint): Use it. - (memory_breakpoint_size): Likewise. - -Tue Mar 21 17:03:17 1995 Kung Hsu - - * sparc-stub.c: add nop after 'bg good_wim'. - * sparcl-stub.c: ditto. - -Tue Mar 21 13:34:12 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * infrun.c (handle_command): Don't print TARGET_SIGNAL_0, - TARGET_SIGNAL_UNKNOWN, or TARGET_SIGNAL_DEFAULT. - -Mon Mar 20 10:09:59 1995 Jeff Law (law@snake.cs.utah.edu) - - * hppab-nat.c (store_inferior_registers): Sync with HPUX version. - -Mon Mar 20 07:34:48 1995 Stu Grossman (grossman@cygnus.com) - - * hppah-nat.c (store_inferior_registers): Move check for - CANNOT_STORE_REGISTER to a better place. Fixes ptrace I/O errors - found by test suite during function calls, which attempts to write - unwritable registers. - -Sat Mar 18 02:02:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * mdebugread.c (parse_symbol): If finishing a function without - known parameter type info, set that from parameter symbols. - Remove commented-out add_param_to_type support. - -Thu Mar 16 16:38:03 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * xcoffread.c (process_linenos): Make sure filename we pass to - start_subfile will cause deduce_language_from_filename to return - the correct thing. Reindent function to GNU standards. - -Thu Mar 16 15:54:00 1995 J.T. Conklin - - * nlm/gdbserve.c (handle_exception): #if out call to StopBell, - as it is not available on NetWare 3 or PIN. - * nlm/ppc.c (StopBell): Removed. - -Thu Mar 16 12:14:41 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * xcoffread.c (read_xcoff_symtab): When creating a dummy parameter - inferred from the traceback tags, give its type the name - "". - - * stabsread.c (rs6000_builtin_type): Recognize types -31 to -34. - -Wed Mar 15 15:09:29 1995 Stu Grossman (grossman@cygnus.com) - - * findvar.c (read_register_bytes write_register_bytes): Make - these routines much smarter about updating registers from the - target, only doing so when absolutely necessary. This really - speeds up register modification on some remote targets. - - * monitor.c: More cleanups. Get rid of monitor_load_ascii_srec. - BFD makes this unnecessary. Lots of debugging speedups. - * (expect): NULL terminate return string. - * (monitor_open monitor_supply_register parse_register_dump - monitor_wait monitor_fetch_register): Switch to using GNU regexp - library to parse multi-register displays. - * (monitor_read_memory): Read multiple bytes (up to 16) at once. - * (monitor_create_inferior): Call clear_proceed_status to make run - command notice first breakpoint. - * (monitor_load): Clean up. Reset inferior_pid, set pc to start - address and reset symbol table stuff to make loads put things into - a fresh state. - * (monitor_load_srec): Lower sleep time to 1 second. - - * monitor.h (struct monitor_ops): Add register_pattern and - supply_register to monitor_ops. - - * rom68k-rom.c: Add new support for handling register dumps. - * config/m68k/tm-m68k.h: Define D0_REGNUM and A0_REGNUM for register - dump handling. - -Wed Mar 15 15:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * utils.c, defs.h (putchar_unfiltered, fputc_unfiltered): Make - argument be an int, not a char. Using a prototype followed by an - old-style function definition in a case where an argument is - widened is a GCC-ism not supported by the native AIX compiler. - -Wed Mar 15 12:22:35 1995 J.T. Conklin - - * nlmstub.def: Removed, this was moved to nlm/gdbserve.def - long ago. - - * configure.in (alpha-*-netware*): Removed configuration. - * config/alpha/{alpha-nw.mt, gdbserve.mt, tm-alphanw.h}: Removed. - * nlm/{README-ALPHA-NETWARE, aio.h, alpha-io.S, alpha-regdef.h, - alpha.c, alpha.h, altdebug.h}: Removed. - - * nlm/gdbserve.c (main): Add support for processing BOARD= - argument, deprecate NODE=. - -Wed Mar 15 10:58:26 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * c-exp.y (yylex): Make an empty character constant an error. - -Tue Mar 14 15:00:54 1995 Per Bothner - - * valops.c (value_arg_coerce): Do possible value_coerce_array - before determining type argument to value_cast. - -Tue Mar 14 10:41:41 1995 Kung Hsu - - * remote-es.c: Replace ignore with 0. - -Tue Mar 14 05:52:36 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * valops.c (value_repeat), eval.c (evaluate_subexp_standard): - If VALUE_REPEATED is already set, just error out. - - * valops.c (value_cast, value_slice), parse.c (follow_types): Add - FIXME-type-allocation comments. - - * gdbtypes.h (struct type): Fix comment about what units the - TYPE_LENGTH is in. - -Mon Mar 13 18:27:25 1995 Stan Shebs - - * ch-valprint.c (annotate.h): Include. - * eval.c (evaluate_subexp_standard): Remove unused variable. - (calc_f77_array_dims): Add parens to expression. - * f-exp.y (yylex): Add parens to expression, remove unused label. - * f-lang.h (calc_f77_array_dims): Declare. - * f-valprint.c (f_val_print): Remove unused variables. - -Mon Mar 13 15:25:47 1995 Jim Kingdon - - * alpha-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't - use the PDR, just examine prologues instead. - -start-sanitize-arc -Fri Mar 10 16:13:18 1995 Kung Hsu - - * config/tm-arc.h: Change arc register names. -end-sanitize-arc - -Fri Mar 10 02:49:40 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - Fix problems with infinite recursion when printing a class - that contains a static instance of the class. - * cp-valprint.c (dont_print_vb_obstack): Renamed from - dont_print_obstack, made static. - (dont_print_statmem_obstack): New obstack, controls printing - of static member classes. - (_initialize_cp_valprint): Initialize it. - (cp_print_static_field): New function, handles printing of - static members. - (cp_print_value_fields): New parameter dont_print_statmem to - handle recursive printing of static member classes, use - cp_print_static_field to handle printing of static members. - * c-valprint.c (cp_print_value_fields): Update prototype and - call to include additional dont_print_statmem parameter. - * c-valprint.c, f-valprint.c (dont_print_obstack): Remove unused - extern declaration. - - * alpha-tdep.c, findvar.c, infptrace.c: Include . - - * config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS): Call - alpha_find_saved_regs if fi->saved_regs is still NULL. - - * elfread.c (elf_symtab_read): Ensure that the filename field - of a minsym is nonempty. Ignore solib trampoline symbols from - the main symbol table, they might have a bogus value. - - * procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh: - Fix typos in comments. - -Thu Mar 9 17:19:47 1995 Jim Kingdon - - * mdebugread.c (parse_symbol, psymtab_to_symtab_1): Initialize - pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1. That way - we know whether the PDR ever got set. - * mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't - use the PDR, just examine prologues instead. - -Wed Mar 8 23:35:10 1995 Jeff Law (law@snake.cs.utah.edu) - - * somsolib.c (som_solib_section_offsets): Get offset of text - section right. - -Wed Mar 8 16:12:21 1995 Stu Grossman (grossman@cygnus.com) - -start-sanitize-gdbtk - * gdbtk.c (gdb_get_breakpoint_info): Return error if breakpoint - type is not bp_breakpoint. -end-sanitize-gdbtk - - * source.c (forward_search_command reverse_search_command): Set - convenience variable $_ to be the line # of the match. - * symtab.c (decode_line_1): Allow convenience variables to be - used in line specs (for breakpoints and such). - -Wed Mar 8 12:51:00 1995 Stan Shebs - - * Makefile.in (VERSION): Bump to 4.14.1. - * NEWS, README: Update for 4.14. - * i386v-nat.c (i386_insert_aligned_watchpoint): Fix declaration. - (i386_insert_nonaligned_watchpoint): Call aligned instead of - generic watchpoint insertion. - -Tue Mar 7 19:26:10 1995 Per Bothner - - * valops.c (value_slice): Do COERCE_VARYING_ARRAY. - -Tue Mar 7 00:23:47 1995 Stu Grossman (grossman@cygnus.com) - - * monitor.c, array-rom.c, monitor.h, rom68k-rom.c: Move target_ops - into monitor.c. - * monitor.c (monitor_create_inferior): Allow run command to start - program. - - * monitor.c (monitor_load): Set PC to start address when done - loading. - - * array-rom.c, monitor.h, rom68k-rom.c: Clean up target_ops. - Remove ref to monitor_create_inferior. - - * monitor.c: More general cleanups. Add prototypes, remove - unused routines. Fix bug with wrong number of args to error(). - - * main.c (main): Don't start up GUI when running under gdb mode - in emacs. - - * Makefile.in: Add rules for monitor.o and rom68k-rom.o to make - Sun make (with VPATH) work... - - * monitor.c, monitor.h, rom68k-rom.c: Serious cleanup to make IDP - (rom68k) target work right. - * array-rom.c, op50-rom.c, w89k-rom.c: Partial updates to new - monitor.c interface. More work needs to be done here. - * config/m68k/tm-monitor.h: Change DECR_PC_AFTER_BREAK to 0 to - match the IDP monitor. Also, set NUM_REGS to 18 cuz there's no - floating-point for this card. - - * serial.h, ser-go32.c, ser-go32-para.c, ser-mac.c, ser-tcp.c, - ser-unix.c: Add SERIAL_SETSTOPBITS to set the number of stopbits - (needed for IDP board?!?!?). - - * defs.h, utils.c, remote-hms.c, remote-pa.c, remote.c: Fix defs - and usage of fputc_unfiltered and putchar_unfiltered. Eliminate - putc_unfiltered (it's superfluous). - - * command.h, command.c, top.c: Add var_enum command type. It's - like var_string but allows only only one of the specified strings. - -Mon Mar 6 15:03:59 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * valops.c (value_cast): Don't use backslash newline--pre-ANSI - compilers (such as SunOS4 /bin/cc) don't generally support it - except in some contexts. - -Fri Mar 3 17:42:48 1995 Per Bothner - - * valops.c (value_cast): Check for cast to array type *before* - we coerce array to pointer (in case arg2 is already array). - - * valops.c (call_function_by_hand): Set using_gcc to 2 if using - gcc2. Needed for REG_STRUCT_HAS_ADDR to work on sparc. - Also check REG_STRUCT_HAS_ADDR for union, array and string types. - - * valops.c (call_function_by_hand): Re-arrange code for pushing - paramaters on the stack so we can do better STACK_ALIGN. - - * valops.c (call_function_by_hand): Call error if the number - of arguments is fewer than parameter types in function type. - -Fri Mar 3 17:13:05 1995 Doug Evans - - * sparc-tdep.c (sparc_extract_struct_value_address): Move - sparc64 support to here. - (sparc64_extract_struct_value_address): Deleted. - (dump_ccreg): Add a prototype so long long arg -> int. - * sparc/tm-sp64.h (USE_STRUCT_CONVENTION): Define. - (EXTRACT_STRUCT_VALUE_ADDRESS): Delete. - -Fri Mar 3 15:12:12 1995 Jeff Law (law@snake.cs.utah.edu) - - * hpread.c (hpread_record_lines): New argument "offset". All - callers changed. Use it to handle dynamic address relocation. - (hpread_build_psymtabs): Adjust texthigh as we read each function - debug symbol. Fix computation of texthigh. - (hpread_read_subrange_type): Work around macro bugs in HP's - compilers. - (hpread_process_one_debug_symbol): Correctly map source lines. - - * somread.c (check_strange_names): Filter names emitted by the HP - compiler when generating PIC code. - - * valops.c (value_struct_elt_for_reference): Work around macro - bugs in HP's compilers. - * c-exp.y (block): Likewise. - -Fri Mar 3 12:27:28 1995 Jim Kingdon - - * rs6000-tdep.c (push_dummy_frame): Fix order of arguments to - store_address. - - * utils.c [_AIX]: Include stddef.h instead of #defining size_t. - -Fri Mar 3 12:33:24 1995 Michael Meissner - - * rs6000-tdep.c (skip_prologue): Skip multiple stores of the saved - registers that GCC emits on the PowerPC by default in addition to - the store multiple instruction used on the Power series. - -Fri Mar 3 00:54:58 1995 Doug Evans - - * sparc-tdep.c (decode_asi): New function. - (sparc_print_register_hook): Pretty print more v9 registers. - * sparc/tm-sp64.h (REGISTER_NAMES): Fix some typos. - -Thu Mar 2 22:20:22 1995 Doug Evans - - * dwarfread.c (struct dieinfo): Use CORE_ADDR for at_{low,high}_pc. - (target_to_host): Change result type to CORE_ADDR. - -Thu Mar 2 15:13:04 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * rs6000-tdep.c: Fix byte-swapping sins. - -Thu Mar 2 16:48:45 1995 Michael Meissner - - * rs6000-tdep.c (branch_dest): Minor code cleanup, don't share - code between branch unconditional and branch conditional cases. - -Wed Mar 1 09:41:26 1995 Doug Evans - - Various changes for sparc64. - * sparc-tdep.c (NUM_SPARC_FPREGS): Define. - (SPARC_INTREG_SIZE): Define. - (*): Use SPARC_INTREG_SIZE instead of REGISTER_RAW_SIZE (intreg) - where appropriate. - (enum branch_type): New value `done_retry'. - (isbranch): Renamed from isannulled. All callers changed. - Support new sparc64 branch insns. - (single_step): Handle done_retry. - (sparc_extract_struct_value_address): Don't assume 4 byte regs. - (get_saved_register): Likewise. - (sparc_push_dummy_frame): Likewise. - (sparc_frame_find_saved_regs): Likewise. - (sparc_pop_frame): Likewise. Don't refer to FPS_REGNUM, CPS_REGNUM, - or PS_REGNUM if not sparc64. sparc64 has 64 fp regs. - (sparc64_extract_struct_value_address): New function. - (dump_ccreg, sparc_print_register_hook): Likewise. - * sp64-tdep.c: Deleted. - * sparc/tm-sp64.h (GDB_TARGET_IS_SPARC64): Define. - (NUM_REGS): Reduce by 2, cle/tle are in the pstate reg. - (CC_HAS_LONG_LONG): Define. - (REGISTER_NAMES): Delete cle/tle and reorganize. - (PS_REGNUM, FPS_REGNUM, CPS_REGNUM): Delete, they're ifdef'd out of - sparc-tdep.c now. - (REGISTER_BYTES): Update. - (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Delete. - (EXTRACT_RETURN_VALUE): Delete. Use definition in tm-sparc.h. - (NO_SINGLE_STEP): Likewise. - * sparc/tm-sparc.h (EXTRACT_VALUE_RETURN): Don't assume 4 byte regs. - * sparc/sp64.mt: Move simulator support ... - * sparc/sp64sim.mt: ... to here. - -Wed Mar 1 13:14:42 1995 Kung Hsu - - * remote-vx960.c: new file for target specific register packaging. - * remote-vx68.c: ditto. - * config/i960/vxworks960.mt: add remote-vx960.o. - * config/m68k/vxworks68.mt: add remote-vx68.o. - -Wed Mar 1 13:42:49 1995 Michael Meissner - - * remote.c (remote_wait): Make calls to strtol be type correct by - passing the address of a char * pointer instead of an unsigned - char *. - - * rs6000-tdep.c (push_dummy_frame): Cast sp to char * when calling - write_memory to make things type correct. - -Wed Mar 1 12:17:31 1995 Michael Meissner - - * ch-exp.y, c-exp.y, f-exp.y, m2-exp.y (yy defines): Support the - standard Linux yacc by adding more names to be redefined with a - prefix. - -Tue Feb 28 22:55:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * hppa-tdep.c (pa_print_registers), monitor.c: Use - extract_unsigned_integer and friends, not SWAP_TARGET_AND_HOST. - * defs.h, findvar.c: Move SWAP_TARGET_AND_HOST back to findvar.c. - Rename it to SWAP_FLOATING to make it clear it is no longer for - integers. - -Tue Feb 28 14:38:39 1995 Kung Hsu - - * defs.h (SWAP_TARGET_AND_HOST): check endianess at runtime not - compile time. - -start-sanitize-arc - * arc-tdep.c (_initialize_arc_tdep): set tm_print_insn according to - processor. - * remote-arc.c (arc_wait): when a processor stops, stop other two - processors too. - * remote-arc.c (switch_command): switch tm_print_insn. -end-sanitize-arc - - * vx-share/ptrace.h: merge in WRS new ptrace requests. - - * defs.h: fix a syntax error. - - * a29k-tdep.c (get_longjmp_target): add this function, from WRS. - * remote-vx.c: move read_register and write_register out to - target specific files. - * remote-vx29k.c (get_fp_contnets): add this function, from WRS. - - * defs.h: define SWAP_TARGET_AND_HOST macro. - * findvar.c, monitor.c, hppa-tdep.c: remove definition of - SWAP_TARGET_AND_HOST. - -Tue Feb 28 08:31:40 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * alpha-tdep.c (find_proc_desc): Only attempt to set - PROC_LOCALOFF (found_heuristic) if found_heuristic is non-NULL. - -Mon Feb 27 11:56:32 1995 Stan Shebs - - * monitor.c: General gcc -Wall lint cleanup and reformat. - (monitor_command): If no args, send an empty command. - -Thu Feb 23 21:07:25 1995 Stu Grossman (grossman@cygnus.com) - - * monitor.c (monitor_load_ascii_srec): Add a one second sleep - after send LOAD_CMD to prevent loss of first S-record. - -Tue Feb 21 20:48:42 1995 Per Bothner - - * valops.c (call_function_by_hand): Set using_gcc to 2 if gcc-2. - Call error if too few arguments. - If REG_STRUCT_HAS_ADDR (structs passed by invisible reference), - copy and convert to reference *before* we calculate alignment. - Also, make sure structs allocated for return values and invisible - reference don't violate STACK_ALIGN. - -Tue Feb 21 23:29:59 1995 Per Bothner - - * ch-exp.y (expression_conversion): Recognize 'ARRAY () TYPE (EXPR)' - (same as C's '(TYPE[])EXPR') - -Tue Feb 21 11:47:26 1995 Stan Shebs - - * top.c (print_gdb_version): Update the year. - -Sun Feb 19 14:31:57 1995 Jim Kingdon - - * Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Look for newlib in - `..' not in `../..'. - -Sun Feb 19 11:05:28 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * procfs.c (unconditionally_kill_inferior): Don't issue a PIOCKILL - in addition to a PIOCSSIG to kill the inferior. - -Thu Feb 16 15:06:12 1995 Per Bothner - - * parse.c (follow_types): Given (TYPE[]) (i.e. with no length), - create a 0-length array type, and set BOUND_CANNOT_BE_DETERMINED. - * valops.c (value_cast): If a cast like (TYPE[])VALUE (i.e. array - of unknown length) use sizeof(VALUE)/sizeof(TYPE) as the length. - * c-typeprint.c (c_type_print_varspec_suffix): If array length - is 0, print it, but not if upper_bound is BOUND_CANNOT_BE_DETERMINED. - -Thu Feb 16 16:06:50 1995 Michael Meissner - - * dcache.c (insque, remque): Rewrite Linux support. - -Wed Feb 15 12:33:20 1995 Michael Meissner - - * config/powerpc/tm-ppc-eabi.h (TEXT_SEGMENT_BASE): Define as 1. - - * dcache.c (insque, remque): If compiling in standard C on Linux, - protect insque and remque with macros to cast the pointer - arguments to the proper type. - -Tue Feb 14 17:16:41 1995 Stu Grossman (grossman@cygnus.com) - - * annotate.c, breakpoint.c, defs.h, top.c: Replace - enable/disable_breakpoint_hook with modify_breakpoint_hook. -start-sanitize-gdbtk - * gdbtk.c: Ditto. - * gdbtk.c: General cleanups, get rid of unused variables. Redo - handling of stdout/stderr to just return output as the result of - the tcl command that caused the output. Cleanup -Wall stuff. - * (breakpoint_notify): Now returns just action and breakpoint - number. - * (gdb_get_breakpoint_list): New routine. Does the obvious. - * (gdb_get_breakpoint_info): Mostly derived from the old - breakpoint_notify, but returns lots more info. - * (dsprintf_append_element): Helper routine, works like printf, - but appends a tcl element onto the specified DString. Good for - building up lists as return values. - * (gdbtk_enable/disable_breakpoint): Go away. Replaced with - gdbtk_modify_breakpoint. - * (*many routines*): Use new result protocol. - * (call_wrapper): Make sure that recursive calls don't trash results. - * gdbtk.tcl: New windows, autocmd, and breakpoints. - * (gdbtk_tcl_fputs): Don't use $current_output_win redirection - anymore. It's not needed (in fact, this routine may not be needed - anymore). - * (gdbtk_tcl_breakpoint): Change to reflect new breakpoint - notification protocol. - * (gdbtk_tcl_busy gdbtk_tcl_idle): Straighten out buttons, remove - catches. - * (interactive_cmd): Use this wrapper around button invocations - of many commands. This will catch errors and put the results into - the command window. It also updates all the other windows. - * Also, change reliefs of most things to sunken. This actually - looks better. - * (create_file_win): Fix margin binding to allow breakpoints to - work again. - * (create_asm_win): Use return value of gdb_disassemble instead - of implicit I/O to the command window. - * (create_command_window): Use new result protocol to get output - from commands. -end-sanitize-gdbtk - -Tue Feb 14 16:58:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * expression.h: Move declaration of evaluate_subexp_with_coercion - from here... - * value.h: ...to here. - * expression.h: Don't include value.h - -Tue Feb 14 11:46:07 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * expression.h: Move include of value.h until after declaration of - enum exp_opcode. - -Sun Feb 12 13:47:30 1995 Stan Shebs - - * remote-e7000.c: Comprehensive cleanup; removal of dead code, - simplify code, declare things, format to standards. - (inferior.h, value.h, command.h, remote-utils.h): Include. - (e7000_login): Rename to e7000_login_command. - (e7000_ftp): Rename to e7000_ftp_command. - (e7000_drain): Rename to e7000_drain_command. - - * irix5-nat.c (string.h): Include near beginning of file. - -Sun Feb 12 12:36:38 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * valops.c (value_arg_coerce): Use VALUE_TYPE not SYMBOL_TYPE on - arg, it is a value not a symbol. - - gcc -Wall lint: - * eval.c: Move declaration of evaluate_subexp_with_coercion from here.. - * expression.h: ..to here. - * expression.h: Include value.h. - * ch-lang.c (evaluate_subexp_chill): Add default case in switch. - -Sun Feb 12 11:03:47 1995 Per Bothner - - * language.h (struct language_defn): New field evaluate_exp. - * c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn), - f-lang.c (f_language_defn), language.c (unknown_language_defn, - auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn): - Set evaluate_exp to evaluate_subexp_standard. - * ch-lang.c (evaluate_subexp_chill): New function. Chill-specific - support for MULTI_SUBSCRIPT. - (chill_language_defn): Set evaluate_exp to evaluate_subexp_chill. - * eval.c (enum noside): Move from here .... - * expression.h (enum noside): ... to here. - (evaluate_subexp_standard): New prototype. - * eval.c (evaluate_subexp): Renamed to evaluate_subexp_standard. - Removed lo-longer-needed test for chill_varying_type. - (evaluate_subexp): New. Calls exp->language_defn->evaluate_exp. - - * ch-exp.y (maybe_expression_list): New non-terminal. - (primitive_value): Allow empty parameter list. - -Sun Feb 12 10:02:16 1995 Per Bothner - - * buildsym.c (finish_block): If finishing a function without known - parameter type info, set that from parameter symbols. - * c-typeprint.c (c_type_print_varspec_suffix): For TYPE_CODE_FUNC, - print parameter types, if available. - * ch-typeprint.c (chill_type_print_base): Likewise. - - * gdbtypes.h (struct type): Remove function type field. - (TYPE_FUNCTION_TYPE): Remove macro. We can't as simply re-use - function types now that we're also storing parameter types. - And the payoff is much less. - * gdbtypes.c (make_function_type): Don't use/set TYPE_FUNCTION_TYPE. - (recursive_dump_type): Don't print TYPE_FUNCTION_TYPE. - * dwarfread.c (read_subroutine_type): Don't set TYPE_FUNCTION_TYPE. - - * valops.c (value_arg_coerce): Now takes param_type argument. - (call_function_by_hand): Convert arguments with value_arg_coerce - early, and overwrite original args with converted args. - No longer need multiple calls to value_arg_coerce. - (value_arg_push): Removed. - * hppa-tdep.c (hppa_push_arguments): No longer call value_arg_coerce. - * mips-tdep.c (mips_push_arguments): Likewise. - * alpha-tdep.c (alpha_push_arguments): Likewise. - * rs6000-tdep.c (push_arguments, ran_out_of_registers_for_arguments): - Likewise. - * value.h (value_arg_coerce): Remove declaration. (It's now static.) - - * valops.c (value_cast): Do COERCE_VARYING_ARRAY after COERCE_REF. - - * symtab.c (add_param_to_type): Remove (commented-out) function, - since that functionality has been re-written. - * coffread.c: Remove commented-out add_param_to_type support. - * mdebugread.c (parse_symbol): Likewise. - * stabsread.c (define_symbol): Likewise. - -Sun Feb 12 09:03:47 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * buildsym.c (start_subfile): Set language for f2c like for cfront. - -Thu Feb 9 20:20:11 1995 Rob Savoye - - * op50n-rom.c: Add the control registers. - -Thu Feb 9 15:46:39 1995 Stan Shebs - - * Makefile.in (CLIBS): Add $(LIBIBERTY) before, in addition to - after, any host/target/native libraries. - * dcache.c (insque, remque): Remove declarations. - * gdbtypes.h (type_code): Remove trailing comma. - - From Peter Schauer: - * xcoffread.c (read_xcoff_symtab) [C_HIDEXT]: Move #ifdef - STATIC_NODEBUG_VARS inside case. - -Thu Feb 9 07:43:41 1995 Jim Kingdon - - * config/sparc/tm-sun4sol2.h: Define STATIC_TRANSFORM_NAME. - * partial-stab.h: Call it. - * stabsread.c (define_symbol) [STATIC_TRANSFORM_NAME]: Call - STATIC_TRANSFORM_NAME to get the name and use minimal symbols to - get the address. - * sparc-tdep.c (solaris_static_transform_name): New function. - -Thu Feb 9 12:09:09 1995 Jeff Law (law@snake.cs.utah.edu) - - * somread.c (som_symtab_read): Handle dynamic relocation for both - text and data symbols. - (som_symfile_offsets): If objfile is a shared library, then get - text and data offsets from the shared library structures. - * somsolib.c (som_solib_add): Copy the bfd pointer from the - objfile rather than reopening the file again. - (som_solib_section_offsets): New function. - * somsolib.h (som_solib_section_offsets): Declare. - -Wed Feb 8 20:32:18 1995 Jim Kingdon - - * config/sparc/tm-sun4sol2.h, dbxread.c: Rename - N_SO_ADDRESS_MAYBE_MISSING to SOFUN_ADDRESS_MAYBE_MISSING. - * symtab.h (minimal_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: Add - filename field. - * elfread.c (record_minimal_symbol_and_info), - minsyms.c, symtab.h (prim_record_minimal_symbol_and_info): Return - newly created symbol. - * elfread.c (elf_symtab_read) [SOFUN_ADDRESS_MAYBE_MISSING]: - Set filename field of minimal symbol. - * symmisc.c (dump_msymbols) [SOFUN_ADDRESS_MAYBE_MISSING]: - Print filename field. - * minsyms.c, symtab.h (lookup_minimal_symbol): New arg sfile. - * symm-tdep.c, somsolib.c, hppa-tdep.c, c-exp.y, f-exp.y, - m2-exp.y, nindy-tdep.c, m3-nat.c, irix5-nat.c, hpread.c, - os9kread.c, breakpoint.c, alpha-tdep.c, valops.c, symtab.c, - printcmd.c, dbxread.c: Change callers to pass NULL for sfile. - * dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: - Find address of function from minimal symbols. - * partial-stab.h, case 'f', 'F': Call find_stab_function_addr - instead of getting pst->textlow from the stab. - * minsyms.c (find_stab_function_addr): New function. - -Wed Feb 8 19:19:56 1995 Rob Savoye - - * monitor.c: Fix so all the output shows up in the GUI command - window. - -Mon Feb 6 18:50:59 1995 Stan Shebs - - * i386-tdep.c (_initialize_i386_tdep): Put void decl on separate - line, so init.c generation works correctly. -start-sanitize-arc - * arc-tdep.c (_initialize_arc_tdep): Ditto. -end-sanitize-arc - -Mon Feb 6 14:44:36 1995 Rob Savoye - - * config/mips/idt.mt: Add support for the lsi33k target. - * config/sparc/sun4sol2.mh: Add support for ser-tcp. - * array-rom.c: Finish the rest of the support commands needed by - GDB. - * mips-tdep.c: Add LSI33k register names and processor type. - -start-sanitize-gdbtk -Sun Feb 5 20:32:44 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * gdbtk.c (gdb_disassemble): Deference pointer to function before - calling it (pre-ANSI compilers generally require this). - -end-sanitize-gdbtk -Sat Feb 4 13:29:52 1995 Stan Shebs - - * config/m68k/est.mt (TDEPFILES): Remove m68k-pinsn.o. - -Fri Feb 3 16:47:31 1995 Kung Hsu - - * ser-go32-para.c (dos_read): fix syntax errors. - -Fri Feb 3 11:19:20 1995 Stu Grossman (grossman@cygnus.com) - - * core.c (dis_asm_read_memory), defs.h, top.c: Get rid of - dis_asm_read_memory_hook. We can now call the disassemblers - directly and have no need for this hook anymore. -start-sanitize-gdbtk - * gdbtk.c (gdb_disassemble): Ditto. -end-sanitize-gdbtk - * defs.h, printcmd.c: Make print_insn be static. - - * ser-go32.c (dos_comisr): Make this 8 bit clean. - * (dos_open dos_close): Allow multiple opens to the same device. - Use a ref count to prevent unwanted deallocations. - * sparcl-tdep.c: Put #ifdefs around all socket stuff to make GO32 - happy. - * (sparclite_ops): Switch to download_stratum. - * target.h (enum strata): Move download_stratum before - process_stratum so that executable targets get pushed on top of - download targets. - -Thu Feb 2 19:02:45 1995 Rob Savoye - - * array-rom.c: Remove the non GDB remote protocol config stuff. - - * monitor.c: All reading/writing functions for memory and - registers work. - -Thu Feb 2 16:11:04 1995 Kung Hsu - -start-sanitize-arc - * config/arc/arc.mt: new target makefile for arc processor. - * config/arc/tm-arc.h: new target header for arc processor. - * config/arc/go32.mh: new go32 host makefile for arc processor. - * config/arc/xm-go32.h: new go32 host header for arc processor. - * arc-tdep.c: new target dependent codes for arc processor. - * remote-arc.c: new file for arc-specific protocol through - parallel line. -end-sanitize-arc - * ser-go32-para.c: new file for go32 parallel port communication. - -Thu Feb 2 13:58:40 1995 Stan Shebs - - * Makefile.in (VERSION): Bump to 4.13.2. - -Thu Feb 2 07:27:56 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - Fix compiler warnings: - * remote-e7000.c (printf_e7000debug): Rename to puts_e7000debug - and have the caller do the sprintf. Saves us from varargs hell. - (normal): Define before use. - * remote-e7000.c: Reindent a few things. - -Wed Feb 1 21:16:42 1995 Per Bothner - - * f-typeprint.c (f_type_print_varspec_suffix): Print array index - ranges in reverse order. - * f-valprint.c (f77_create_arrayprint_offset_tbl): Fix calculation. - - * eval.c (evaluate_subscript): Don't call value_subscript, since - it adjusts for lower bound and enforces ranges. - - * expression.h (exp_code): Remove MULTI_F77_SUBSCRIPT, OP_F77_SUBSTR. - * eval.c, parse.c: Removed uses of removed opcodes. - * eval.c (evaluate_subexp): Clean up handling of - OP_UNDETERMINED_ARGLIST (no backtracking, more general). - - * f-valprint.c (f_val_print): Print TYPE_CODE_STRING using - LA_PRINT_STRING, and not val_print_string (which reads from inferior). - - * ch-lang.c (chill_is_varying_struct), ch-lang.h: Remve function - duplicate function made redundant by chill_varying_type. - - Re-write of f77 string and complex number support: - - * language.h (struct language_defn): New fields string_lower_bound - and string_char_type. - * c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn), - language.c (unknown_language_defn, auto_language_defn, - local_language_defn), m2-lang.c (m2_language_defn), f-lang.c - (f_language_defn), ch-lang.c (chill_language_defn): Set new fields. - * gdbtypes.c (create_string_type): Use new string_char_type field. - * valops.c (value_string): Use new string_lower_bound field. - - * defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT): Removed. - * f-lang.c (f_create_fundamental_type, _initialize_f_language), - m2-lang.c (m2_create_fundamental_type), - gdbtypes.c (_initialize_gdbtypes): Set TYPE_TARGET_TYPE of complex - types. Set their TYPE_CODEs to TYPE_CODE_COMPLEX. - * mdebugread.c (mdebug_type_complex, mdebug_type_double_complex): - Removed. Use builtin_type_complex and builtin_type_double_complex. - - * gdbtypes.h (enum type_code): Removed TYPE_CODE_LITERAL_STRING - and TYPE_CODE_LITERAL_COMPLEX. - * c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c: Removed uses of - TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX. - * gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type, - f77_create_literal_string_type): Removed. - * value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR, - VALUE_SUBSTRING_MYADDR): Removed. - - * expression.h (enum exp_opcode): Rename OP_F77_LITERAL_COMPLEX to - OP_COMPLEX. - * parse.c: Update accordingly. - - * f-valprint.c (f77_print_cmplx): Removed. - (f_val_print case TYPE_CODE_COMPLEX): Re-write to use print_floating. - - * f-exp.y (STRING_LITERAL): Use OP_STRING instead of OP_ARRAY. - * eval.c (evaluate_subexp): For case OP_ARRAY, don't call - f77_value_literal_string. - * valops.c, value.h (f77_value_literal_string, f77_value_substring, - f77_assign_from_literal_string, f77_assign_from_literal_complex): - Removed. - (value_assign): No longer need to handle literal types. - * valops.c (f77_value_literal_complex), value.h: Re-written and - renamed to value_literal_complex. Last arg is now a (complex) type. - * valops.c (f77_cast_into_complex): Re-written and renamed to - cast_into_complex. - * eval.c (evaluate_subexp): Update accordingly. - - * ch-valprint.c (chill_val_print): On TYPE_CODE_STRING, don't - print address for non-'s'-formats. - * ch-typeprint.c, ch-valprint.c: Use chill_varying_type instead - of chill_is_varying_struct. - -Wed Feb 1 13:27:33 1995 Stan Shebs - - gcc -Wall lint. - * alpha-tdep.c (alpha_in_lenient_prologue): Comment out. - (after_prologue): Remove unused local b. - * procfs.c (thread.h): Include. - (pr_flag_table, pr_why_table, faults_table, siginfo_table): Use - nested braces in initializer. - * top.c (initialize_targets, initialize_utils): Declare. - (locate_arg, insert_args): Add parens around tested assignments. - * remote-utils.c (sr_scan_args): Remove decl of strtol. - * remote.c (thread.h): Include. - (remote_wait): Remove unused local p2. - * sparc-tdep.c (fill_gregset, fill_fpregset): Remove decls of - registers array. - - defs.h (stdlib.h): Include. - (exit, perror, atoi, qsort, memcpy, memcmp): Don't declare. - (fclose, atof, malloc, realloc, free, strchr, strrchr, strstr, - strtok, strerror): Don't specify parameter types in declaration. - -Wed Feb 1 12:23:57 1995 Per Bothner - - * ch-exp.y (value_string_element, string_primitive_value, - start_element, left_element, right_element, slice_size, - lower_element, upper_element, first_element): Removed. - (value_string_slice, value_array_slice): Replaced by ... - (slice): New non-terminal, with working slice support. - (primitive_value_lparen, rparen): New non-terminals. - (maybe_tuple_elements): New non-terminal, to allow empty tuples. - (idtokentab): Added "up". - - * value.h (COERCE_VARYING_ARRAY): New macro. - * valarith.c (value_subscript): Use it. - * valops.c (value_cast): Likewise. Also, do nothing if already - correct type, and allow converting from/to range to/from scalar. - - * valops.c, value.h (varying_to_slice, value_slice): New functions. - * eval.c (OP_ARRAY): Add cast for array element. - * expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT): New exp_opcodes. - * valops.c (chill_varying_type): Moved function frp, here ... - * gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here. - * parse.c (length_of_subexp, prefixify_subexp): Add support - for TERNOP_SLICE, TERNOP_SLICE_COUNT. - * expprint.c (print_subexp, dump_expression): Likewise. - * eval.c (evaluate_subexp): Likewise. - - * eval.c (evaluate_subexp case MULTI_SUBSCRIPT): Don't call - value_x_binop on a Chill varying string. - -Tue Jan 31 13:51:53 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * config/m68k/monitor.mt, - config/pa/{hppabsd.mt,hppahpux.mt,hppaosf.mt,hppapro.mt}: Put - depfiles in TDEPFILES not REMOTE_O. - -Tue Jan 31 11:14:44 1995 Steve Chamberlain - - From nigel@algor.co.uk. - * ser-go32.c (dos_close): Don't crash if scb null. - (dos_sendbreak): New function. - (dos_ops): Point to dos_sendbreak. - (dos_info): Calculate COM number correctly. - -Tue Jan 31 09:40:11 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * xcoffread.c (process_xcoff_symbol): Use new variables - func_symbol_type and var_symbol_type as type of functions and - variables which don't have any stabs associated with them. - Reindent most of function. - (_initialize_xcoffread): Initialize *_symbol_type. - - * xcoffread.c (read_xcoff_symtab): Reindent most of function. - Put C_HIDEXT symbols in the minimal symbols, rather than ignoring - them (this part commented out as I didn't quite get it to work). - (cs_to_section, find_targ_sec): New functions, to support above code. - * xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is - actually present. - -Mon Jan 30 17:34:24 1995 Stu Grossman (grossman@cygnus.com) -start-sanitize-gdbtk - * gdbtk.tcl (create_file_win): Disable old popup menu for source - window. -end-sanitize-gdbtk - * sparcl-tdep.c: Add `sparclite' target for doing serial and udp - downloads to SPARClite demo boards. - -Sun Jan 29 09:43:22 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * remote.c, remote-pa.c: Remove #if 0'd icache code. It has had - no hope of working as is for a long time (in particular, shebs' 27 - Jan 95 change confuses the issue further--target_read_memory and - xfer_core_file do *not* do the same thing in this context). - Revise comment. - -Sat Jan 28 13:40:46 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * elfread.c (elf_symtab_read): Do not test BSF_GLOBAL for - procedure linkage table symbols, it is no longer set due to the - Jan 6 BFD change in bfd/elfcode.h. - -Fri Jan 27 17:08:06 1995 Stan Shebs - - * top.c (use_windows): Clarify comments. - - * convex-tdep.c (xfer_core_file): Comment out. - * config/convex/tm-convex.h (XFER_CORE_FILE): Remove. - * remote.c, remote-pa.c (remote_fetch_word): Change xfer_core_file - references to target_read_memory. - * gdbcore.h (xfer_core_file, core_open, core_detach): Remove - declarations. - * corelow.c (core_open, core_detach): Make static. - - * arm-tdep.c: Make it compile. - (exec_file_command, xfer_core_file): Comment out. - (arm_print_insn): Remove, now in libopcodes. - (skip_prologue): Comment out most of body. - (arm_frame_find_saved_regs): Move here from tm-arm.h. - (_initialize_arm_tdep): Set tm_print_insn. - * config/arm/tm-arm.h: Remove old refs to first_object_file_end. - (XFER_CORE_FILE): Remove. - (FRAME_FIND_SAVED_REGS): Call arm_frame_find_saved_regs. - -Fri Jan 27 08:48:28 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * Makefile.in (CHILL_LIB): Define as in testsuite/Makefile.in. - -Thu Jan 26 18:24:41 1995 Jim Kingdon - - * symtab.c (find_pc_line): When subtracting one to get a line - number, make sure not to end up with zero. - - * remote-vx.c: Revert all of Kung's changes of 16 Jan. The - problems with those changes were (a) the file didn't compile, (b) - they changed memset to bzero--memset is correct, (c) they took out - code to deal with boards lacking floating point, (d) who knows - what I didn't discover in a quick read. - -Thu Jan 26 17:32:54 1995 Stu Grossman (grossman@cygnus.com) - - * sparcl-tdep.c: Clean up formatting and indentation. - -Thu Jan 26 10:49:59 1995 Steve Chamberlain - - * remote-hms.c (hms_ops): Change ref of hr_load_image - to gr_load_image. - (dcache_flush, dcache_hit, dcache_value, dcache_fetch, - dcache_poke, dcache_init): Deleted. - (hms_open, hms_resume, hms_fetch_word, hms_store_word): - Use dcache routines provided by remote-util.h - -Thu Jan 26 12:08:31 1995 Michael Meissner - - * configure.in: Add support for powerpc-*-eabi. - - * powerpc/tm-ppc-eabi.h, powerpc/pcc-eabi.mt: New files for - PowerPC support. - -Wed Jan 25 18:13:14 1995 Per Bothner - - * language.h (struct language_defn): New field c_style_arrays. - * language.c (unknown_language_defn, auto_language_defn, - local_language_defn), c-lang.c (c_language_defn, cplus_language_defn, - asm_language_defn): Set c_style_arrays to true. - * m2-lang.c (m2_language_defn), ch-lang.c (chill_language_defn), - f-lang.c (f_language_defn): Set c_style_arrays to false. - * valops.c (value_string): If c_style_array is not set, - allocate string in gdb (not inferior) using allocate_value. - - * value.h (COERCE_ARRAY), valops.c (value_addr, value_arg_coerce): - Only call value_coerce_array if current_language->c_style_arrays. - * values.c: Add #include "language.h". (Needed for COERCE_ARRAY.) - - * valops.c (chill_varying_type): New predicate. - * valops.c (value_cast): Support assigning a fixed string or array - to a variable string/array structure. - - * valarith.c (value_subscripted_rvalue): Extra parameter lowerbound. - Check index>=lowerbound, and then add lowerbound to index here, - instead of in caller. Generalize to arbitrary lval_types. - (value_subscript): Use enhanced value_subscripted_rvalue if - c_style_arrays is false (and index is in range). - -start-sanitize-gdbtk -Wed Jan 25 18:23:46 1995 Stu Grossman (grossman@cygnus.com) - - * gdbtk.c (gdbtk_init): Prevent segfault when gdbtk.tcl can't be - found. - * gdbtk.tcl: Initialize expr_update_list() to prevent errors when - popping up expression window for the first time. -end-sanitize-gdbtk - -Wed Jan 25 18:13:14 1995 Per Bothner - - * eval.c (evaluate_subexp case OP_ARRAY): Fix calls to memset: - TYPE_LENGTH is length in bytes, not bits. - -Wed Jan 25 08:19:35 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * infrun.c (proceed): Flush stdout before resuming inferior. - * infcmd.c (step_1), annotate.c (annotate_starting): - Don't bother to flush here. - -Wed Jan 25 01:11:21 1995 Jeff Law (law@snake.cs.utah.edu) - - * hpread.c (hpread_process_one_debug_symbol): Fix lines garbled - by an ill-advised global search and replace. - -Tue Jan 24 12:10:28 1995 Stu Grossman (grossman@cygnus.com) - - * gdbtk.tcl (create_registers_window): Work around a radiobutton - widget bug to make Options|Natural button work. - - * gdbtk.c (gdb_disassemble): Fix problem with source+assembly and - g++ caused by out-of-order pc's. - * gdbtk.tcl (files_command): Remove duplicate file names. Also, - add scrollbar. - -Mon Jan 23 17:21:09 1995 Stu Grossman (grossman@cygnus.com) - - * gdbtk.tcl: Take .gdbtkinit if it exists. Makes gdbtk match the - doc! - -Mon Jan 23 13:11:46 1995 Per Bothner - - Add support for Chill bitstring literals (e.h. H'FF00'). - * ch-exp.y (match_bitstring_literal): Fix for proper endianness. - * expprint.c (print_subexp): Don't call error on OP_BITSTRING, - just print B''. - * gdbtypes.c (create_set_type): Fix bug in length calculation. - * valops.c, value.h (value_bitstring): New function. - * eval.c (evaluate_subexp): Implement support for OP_BITSTRING. - - * ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC, - check that return type is non-void, and print in proper Chill syntax. - -Mon Jan 23 12:20:34 1995 Rob Savoye - - * Makefile.in: Remove references to remote-mon.c. - * remote-mon.c: remove. Replaced by rom68k-rom.c. - * rom68k-rom.c: Support for Rom68k monitor. - -Mon Jan 23 10:50:57 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * Makefile.in (CHILL_FOR_TARGET): Update -L argument to point to - gcc/ch/runtime not chillrt, since that is where the chill runtime - lives now. - -Mon Jan 23 00:06:57 1995 Steve Chamberlain - - * remote-hms.c (hms_load): Delete. - (target_ops): Use hr_load_image. - - * remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops): - Define memory_insert/remove_breakpoint. - * xm-go32.h: Remove redundant SIGs. - -Thu Jan 19 20:26:58 1995 Steve Chamberlain - - * ser-go32.c: Rewritten by nigel@algor.co.uk. - -Fri Jan 20 15:23:55 1995 Per Bothner - - * expression.h (OP_LABELED): New operator, for Chill - labeled structre tuples. - * ch-exp.y (tuple_element, named_record_element, tuple_elements): - New non-terminals, to handle labeled structure tuples. - (tuple): Re-define using tuple_elements. - * eval.c (evaluate_labeled_field_init): New function, to handle - initialization of structure fields, possibly using OP_LABELED. - (evaluate_subexp): Use it. - * expprint.c (print_subexp case): For OP_ARRAY, use Chill syntax - for Chill. Handled OP_LABELED. - * parse.c (length_of_subexp, prefixify_subexp): Handle OP_LABELED. - - * eval.c (evaluate_subexp): Handle Chill Powerset tuples. - * valarith.c (value_bit_index): Just treat bitstring as represented - by an array of bytes. Alignment is handled by compiler. - -Wed Jan 18 19:00:29 1995 Stan Shebs - - * h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info). - * sh-tdep.c (gdb_print_insn_sh): Ditto. - -Wed Jan 18 11:25:43 1995 Kung Hsu - - * remote-os9k.c (rombug_open): Fix a bug in exception handling - command. - * remote-os9k.c (rombug_write_inferior_memory): reset buffer after - write. - -Tue Jan 17 09:48:38 1995 Jim Kingdon - - * parse.c (_initialize_parse): Improve wording of names of - msym_*_symbol_type. - -Tue Jan 17 14:00:58 1995 Ian Lance Taylor - - * config/mips/tm-mips.h (enum mips_fpu_type): New enum. - (mips_fpu): Change type to enum mips_fpu_type. - (FIX_CALL_DUMMY): Handle mips_fpu == MIPS_FPU_SINGLE. - * mips-tdep.c (mips_fpu): Change type to enum mips_fpu_type. - Don't initialize. - (mips_fpu_string): New static variable. - (mips_push_dummy_frame): Handle mips_fpu == MIPS_FPU_SINGLE. - (mips_pop_frame): Likewise. - (mips_extract_return_value): Likewise. - (mips_store_return_value): Likewise. - (mips_set_fpu_command): New static function. - (mips_show_fpu_command): New static function. - (_initialize_mips_tdep): Change handling of set/show mipsfpu. - -Tue Jan 17 09:48:38 1995 Jim Kingdon - - * a29k-tdep.c (gdb_print_insn_a29k): Fix typo (&info -> info). - - * parse.c (write_exp_msymbol): Use new variables - msym_*_symbol_type as type of msymbol expression. - (_initialize_parse): Initialize them. - -Mon Jan 16 18:11:03 1995 Stan Shebs - - General cleanup and simplication of disassembler interface. - * a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c, - hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c, - m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c, - rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove. - * gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files, - had been -pinsn.c files. - * Makefile.in (ALLDEPFILES): Remove removed files. - (a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o, - hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o, - m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o, - rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o): - Remove compile actions. - * arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o, - vax-tdep.o: Add compile actions. - * defs.h (tm_print_insn): New global. - * a29k-tdep.c (gdb_print_insn_a29k): New function. - (_initialize_a29k_tdep): Rename from _initialize_29k, - set tm_print_insn. - * alpha-tdep.c (print_insn): Remove. - (_initialize_alpha_tdep): Set tm_print_insn. - * arm-tdep.c (arm_print_insn): New function, was print_insn - in arm-pinsn.c. - * convex-tdep.c (convex_print_insn): New function, was print_insn - in convex-pinsn.c. - * h8300-tdep.c (print_insn): Remove. - (gdb_print_insn_h8300): New function. - (_initialize_h8300_tdep): New function. - * h8500-tdep.c (print_insn): Remove. - (_initialize_h8500_tdep): New function. - * hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn. - * i386-tdep.c (_initialize_i386_tdep): New function. - * i960-tdep.c (mem, next_insn): New functions, were in - i960-pinsn.c. - (_initialize_i960_tdep): Set tm_print_insn. - * m68k-tdep.c (_initialize_m68k_tdep): New function. - * m88k-tdep.c (_initialize_m88k_tdep): New function. - * mips-tdep.c (gdb_print_insn_mips): New function. - (_initialize_mips_tdep): Set tm_print_insn. - * pyr-tdep.c (pyr_print_insn): New function, was print_insn - in pyr-pinsn.c. - * rs6000-tdep.c (_initialize_rs6000_tdep): New function. - * sh-tdep.c (print_insn): Remove. - (gdb_print_insn_sh): New function. - (_initialize_sh_tdep): Set tm_print_insn. - * sparc-tdep.c (_initialize_sparc_tdep): New function. - * w65-tdep.c (print_insn): Remove. - (_initialize_w65_tdep): New function. - * z8k-tdep.c (print_insn): Remove. - (gdb_print_insn_z8k): New function. - (_initialize_z8k_tdep): Set tm_print_insn. - * printcmd.c (print_insn): New function, generic disassembler. - * config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o. - -Mon Jan 16 15:43:29 1995 Kung Hsu - - * Makefile.in: add new files remote-vx29k.c, config/a29k/tm-vx29k.h, - and config/a29k/vx29k.mt. - * configure.in: add new configuration a29k-*-vxworks. - * remote-vx29k.c: new file merged from WRS. - * remote-vx.c: merge changes from WRS. - * config/a29k/vx29k.mt: new file for new configuration. - * config/a29k/tm-vx29k.h: new header file for newconfiguration. - -Sun Jan 15 14:36:19 1995 Steve Chamberlain - - * breakpoint.h (disable_breakpoint, enable_breakpoint): - New declarations. - (enum bpdisp): Change name of 'delete' member to 'del'. - (struct bpstat): Changed name to 'bpstats'. - * breakpoint.c (disable_breakpoint, enable_breakpoint, - breakpoint_chain): Made globally visible. - (bpstat_stop_status): Use new name for bpstat. - (break_command_1, watch_command_1, catch_command_1, - breakpoint_auto_delete, denable_delete_breakpoint): Use 'del' - instead of 'delete'. - (set_breakpoint_sal): New function. - * defs.h (registers_changed_hook): New declaration. - * infcmd.c (run_stack_dummy): 'delete' is now 'del'. - * inflow.c (new_tty): Treat WIN32 in same way as __GO32__ - * main.c (main): Don't scan options when in WIN32 and exit - without entering main loop. - * m2-exp.y (m2_elx): Member 'class' is now 'aclass'. - * symtab.h (struct symbol, struct partial_symbol): Changed name of - member 'class' to 'aclass'. - (SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change. - * top.c (registers_changed_hook): New definition. - * utils.c (quit, notice_quit, initialize_utils): Treate WIN32 - in same way as __GO32__. - * value.h (c_typedef_print): Rename 'new' argument. - - * w65-tdep.c, config/tm-w65.h, config/w65.mt: New files. - * configure.in: Suppprt for w65, - - -Sat Jan 14 11:18:11 1995 Jim Kingdon - - * infcmd.c (signal_command): For "signal 0", pass (CORE_ADDR)-1, - not stop_pc, to proceed. - - * eval.c (evaluate_subexp): Clear expect_type except for C++ and CHILL. - -Fri Jan 13 17:52:57 1995 Jim Kingdon - - * infcmd.c (signal_command): Accept "signal 0"; the change to not - accept it was accidental. "handle 0" and "info signal 0" remain - illegal, though. - -Fri Jan 13 15:19:01 1995 Stan Shebs - - * Makefile.in (all): Don't make libgdb-files. - (libgdb): New action, makes libgdb-files. - -Thu Jan 12 21:23:25 1995 Per Bothner - - * stabsread.c (read_enum_type): When pending enum symbols are - put into the enum type, they must be inserted in "backwards - order, in case we've overflowed a struct pending buffer. - -start-sanitize-gdbtk -Thu Jan 12 15:02:40 1995 Stu Grossman (grossman@cygnus.com) - - * gdbtk.c, gdbtk.tcl: Update/add copyright. - * gdbtk.tcl (build_framework): Several fixes for filespec widget, - including dismiss button, and better error handling. - * (create_command_win): Bind button 2 to retrieve selection. -end-sanitize-gdbtk - -Thu Jan 12 09:33:24 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * README: Add note about SPARCworks cc release 3.0 and higher. - - Add procfs support for Alpha OSF/1-2.x. - * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic - OSF/1 native support. - * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly. - (MUNCH_DEFINE): Removed. - * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files - for procfs support. - * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1 - release 2.x and higher, else alpha-osf1.mh, as the procfs support - in release 1.x is incomplete. - * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh. - * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset, - fill_fpgregset): New routines for procfs support. - * inftarg.c (_initialize_inftarg): Don't add ptrace support - if we have an optional procfs and /proc is accessible. - * procfs.c: Include sys/fault.h and sys/syscall.h before - including sys/procfs.h. - (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL - is defined, additionally perform a PIOCSSIG to really terminate - the inferior. - (create_procinfo): Always return a result. - (create_procinfo, do_attach): Don't trace T_IFAULT faults if - PROCFS_DONT_TRACE_IFAULT is defined. - (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as - argument to startup_inferior if it is defined. - (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead - of tracing exits from exec system calls. Needed for the user level - loader under Alpha OSF/1. - (do_detach): Clear any pending signal if we want to detach from - a process without a signal. - (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined, - don't issue a PIOCSSIG if pr_cursig already contains the signal we - intend to set. - (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the - pending signals are numbered from 1 instead of 0. - (info_proc_mappings): Increase size of output format for addresses - if BFD_HOST_64_BIT is defined. - (procfs_stop): Renamed from child_stop. - (_initialize_procfs): Don't add procfs support if we have an - optional procfs and /proc is not accessible. - -start-sanitize-gdbtk -Wed Jan 11 17:06:55 1995 Stu Grossman (grossman@cygnus.com) - - * gdbtk.tcl: Add button to control mixed source disassembly. - Use text widgets in expr window. The give me more control over - layout. - Add auto-updating of exprs in expression window. - Handle expressions out of scope a bit better. - Make selected window pop up to the top when invoked via the - menubar. - Make copyright message have raised relief. - - * gdbtk.c (gdbtk_init): Improve handling for errors in gdbtk.tcl - during startup. -end-sanitize-gdbtk - -Wed Jan 11 17:53:26 1995 Rob Savoye - - * array-rom.c: Add support for most commands. - - * monitor.c: Add GDB remote protocol for the hybrid environment on - the Array board. - -Wed Jan 11 00:44:01 1995 Jeff Law (law@snake.cs.utah.edu) - - * command.c (show_user_1): Use print_command_line to show a user - defined command (including control structures). - - * top.c (init_main): Change documentation for user defined - commands to indicate they may accept up to ten arguments. - -Tue Jan 10 16:22:41 1995 Jim Kingdon - - * mips-tdep.c (mips_skip_prologue): Accept or as well as addu for - `move $s8, $sp' instruction. - -Sun Jan 8 12:45:34 1995 Jim Kingdon - - * target.c, target.h (target_signal_from_command): New function. - * infrun.c (handle_command, signals_info), infcmd.c - (signal_command): Use it. - * infrun.c, infcmd.c: Update docstrings for these commands. - - * target.h (enum target_signal), target.c (signals), target.c - (target_signal_from_host, target_signal_to_host): Add - TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx. - * config/tm-lynx.h: Define signal numbers for realtime events. - -Sat Jan 7 07:23:53 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * dbxread.c (process_one_symbol): Handle N_FUN symbols - for Sun acc 3.0 under SunOS4. - - Changes to improve handling of runtime common symbols - under SunOS4. - * minsyms.c (get_symbol_leading_char): New routine to determine - the leading symbol character for an objfile. - (prim_record_minimal_symbol_and_info, install_minimal_symbols): - Use it. - * objfiles.h (rt_common_objfile): New global, points to objfile - containing the runtime common minimal symbols. - * objfiles.c (free_objfile): Mark rt_common_objfile as - unallocated before freeing it. - * solib.c (allocate_rt_common_objfile): New routine to allocate - an objfile for the runtime common minimal symbols. - (solib_add_common_symbols): Allocate an objfile for the runtime - common symbols if necessary and put common symbols into it. - Clean up code and comments. - (solib_add, special_symbol_handling): Cleanup comments regarding - runtime common symbols. - * stabsread.c (scan_file_globals_1): New routine, contains - old scan_file_globals code. Checks if there are any unresolved - global symbols before starting the expensive minimal symbol table - search. - (scan_file_globals): Now calls scan_file_globals_1 for the passed - objfile and eventually for the runtime common objfile. Complains - about any unresolved global symbols and removes them from the - global symbol chain to avoid dangling pointers into the symbol - table if the symbol table is reread. - -Thu Jan 5 17:38:29 1995 Stu Grossman (grossman@cygnus.com) - - * Makefile.in (install_only uninstall): Indent for clarity. - - * core.c (dis_asm_read_memory): Add call to - dis_asm_read_memory_hook to provide alternate way for disassembler - to read memory. - - * defs.h: Protect from multiple inclusion. Add decl for - dis_asm_read_memory_hook. - - * top.c: Make window startup be the default. - * Add dis_asm_read_memory_hook. - -start-sanitize-gdbtk - * gdbtk.c (finish_saving_output): Don't do anything if not saving - output. - * (breakpoint_notify): Don't send null filename to tcl. - * (gdb_eval): New tcl command to eval an expression. - * (gdb_disassemble): New tcl command to do disassembly. This - allows tcl code to choose between exec file and target memeory, - and can also do mixed source and assembly. - * (gdbtk_init): Move reading of gdbtk.tcl to the end to make sure - that more of the environment is set up. Also, create link between - gdb and tcl vars disassemble{-_}from{-_}exec. - - * gdbtk.tcl: New expression window support. - * Make assembly window be 80 columns wide. - * Use new disassembly method. Add menu items to select - disassembly from exec file or target. - * Change View menubar item to Options. - - * Get rid of Stack, Breakpoints, Signals, and Variables Windows, - since they don't exist yet. - - * Pop up a copyright window on startup. -end-sanitize-gdbtk - -Thu Jan 5 01:16:40 1995 Jeff Law (law@snake.cs.utah.edu) - - * stabsread.c (define_symbol): Handle `a' symbol type used for - reference parameter passed in a register. - -start-sanitize-gdbtk -Wed Jan 4 19:49:10 1995 Stan Shebs - - * gdbtk.tcl (build_framework): Add standard commands menu, more - windows to standard windows menu. - (not_implemented_yet): Clarify message. -end-sanitize-gdbtk - -Wed Jan 4 12:27:29 1995 Kung Hsu - - * defs.h: move include tm.h up, so that the type LONGEST can - also based on the target requirement to determine. In this case - target mips64. - - * remote-os9k.c (rombug_open): catch exception e in rombug. - * remote-os9k.c (rombug_wait): print message before register display - from rombug. - -Wed Jan 4 09:18:27 1995 Jim Kingdon (kingdon@lioth.cygnus.com) - - * top.c (locate_arg): Call strchr not index. - -Tue Jan 3 16:52:03 1995 Per Bothner - - * ch-exp.y (literal): Recognize NULL. - (tuple): Parse simple unlabelled tuples. - * eval.c (evaluate_subexp case OP_ARRAY): Use expect_type to - evaluate brace-initializer-expressions depending on context. - (evaluate_subexp case UNOP_CAST): Pass the target type as - expected type when evaluating the expression. - - * ch-typeprint.c (chill_type_print_base): Get names of PTR and - BOOL from TYPE_NAME. - * ch-valprint.c (chill_print_type_scalar): New function, to handle - TYPE_CODE_RANGE better than print_type_scalar does. - (chill_val_print_array_elements): Use above new function. - -Mon Jan 2 15:02:51 1995 Stan Shebs - - * remote-udi.c (udi_load): Tell symbol_file_add that the - program being loaded is the main program. - -For older changes see ChangeLog-94 +For older changes see ChangeLog-95 Local Variables: mode: indented-text diff --git a/gdb/symmisc.c b/gdb/symmisc.c index e9af39f76f8..d4b3d688f2f 100644 --- a/gdb/symmisc.c +++ b/gdb/symmisc.c @@ -1,5 +1,5 @@ /* Do various things to symbol tables (other than lookup), for GDB. - Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994 + Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996 Free Software Foundation, Inc. This file is part of GDB. @@ -16,7 +16,7 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software -Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "defs.h" #include "symtab.h" @@ -152,6 +152,43 @@ free_symtab (s) #if MAINTENANCE_CMDS +void +print_objfile_statistics () +{ + struct objfile *objfile; + + immediate_quit++; + ALL_OBJFILES (objfile) + { + printf_filtered ("Statistics for '%s':\n", objfile -> name); + if (OBJSTAT (objfile, n_stabs) > 0) + printf_filtered (" Number of \"stab\" symbols read: %d\n", + OBJSTAT (objfile, n_stabs)); + if (OBJSTAT (objfile, n_minsyms) > 0) + printf_filtered (" Number of \"minimal symbols read: %d\n", + OBJSTAT (objfile, n_minsyms)); + if (OBJSTAT (objfile, n_psyms) > 0) + printf_filtered (" Number of \"partial symbols read: %d\n", + OBJSTAT (objfile, n_psyms)); + if (OBJSTAT (objfile, n_syms) > 0) + printf_filtered (" Number of \"full symbols read: %d\n", + OBJSTAT (objfile, n_syms)); + if (OBJSTAT (objfile, n_types) > 0) + printf_filtered (" Number of \"types defined: %d\n", + OBJSTAT (objfile, n_types)); + if (OBJSTAT (objfile, sz_strtab) > 0) + printf_filtered (" Space used by a.out string tables: %d\n", + OBJSTAT (objfile, sz_strtab)); + printf_filtered (" Total memory used for psymbol obstack: %d\n", + obstack_memory_used (&objfile -> psymbol_obstack)); + printf_filtered (" Total memory used for symbol obstack: %d\n", + obstack_memory_used (&objfile -> symbol_obstack)); + printf_filtered (" Total memory used for type obstack: %d\n", + obstack_memory_used (&objfile -> type_obstack)); + } + immediate_quit--; +} + static void dump_objfile (objfile) struct objfile *objfile; @@ -546,13 +583,14 @@ print_symbol (args) break; case LOC_CONST_BYTES: - fprintf_filtered (outfile, "const %u hex bytes:", - TYPE_LENGTH (SYMBOL_TYPE (symbol))); { unsigned i; - for (i = 0; i < TYPE_LENGTH (SYMBOL_TYPE (symbol)); i++) + struct type *type = check_typedef (SYMBOL_TYPE (symbol)); + fprintf_filtered (outfile, "const %u hex bytes:", + TYPE_LENGTH (type)); + for (i = 0; i < TYPE_LENGTH (type); i++) fprintf_filtered (outfile, " %02x", - (unsigned)SYMBOL_VALUE_BYTES (symbol) [i]); + (unsigned)SYMBOL_VALUE_BYTES (symbol) [i]); fprintf_filtered (outfile, ","); } break; @@ -622,6 +660,10 @@ print_symbol (args) fprintf_filtered (outfile, ","); break; + case LOC_UNRESOLVED: + fprintf_filtered (outfile, "unresolved"); + break; + case LOC_OPTIMIZED_OUT: fprintf_filtered (outfile, "optimized out"); break; @@ -766,6 +808,9 @@ print_partial_symbol (p, count, what, outfile) case LOC_LOCAL_ARG: fputs_filtered ("shuffled arg", outfile); break; + case LOC_UNRESOLVED: + fputs_filtered ("unresolved", outfile); + break; case LOC_OPTIMIZED_OUT: fputs_filtered ("optimized out", outfile); break;