From: lkcl Date: Sat, 26 Dec 2020 00:38:36 +0000 (+0000) Subject: (no commit message) X-Git-Tag: convert-csv-opcode-to-binary~867 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=ef95f54299c6beec830bb6b56567725975167d30;p=libreriscv.git --- diff --git a/openpower/sv/overview.mdwn b/openpower/sv/overview.mdwn index 410a05e6e..c7e730158 100644 --- a/openpower/sv/overview.mdwn +++ b/openpower/sv/overview.mdwn @@ -535,7 +535,7 @@ The only minor downside here though is the change to VL, which in some implement Whilst this overview shows the internals, it does not go into detail on the actual instruction format itself. There are a couple of reasons for this: firstly, it's under development, and secondly, it needs to be proposed to the OpenPOWER Foundation ISA WG for consideration and review. -That said: draft pages for [[sv/setvl]] and [[sv/svp64]] are written up. The `setvl` instruction is pretty much as would be expected from a Cray style VL instruction: the only differences being that, firstly, the MAXVL (Macimum Vector Length) has to be specified, because that determines - precisely - how many of the *scalar* registers are to be used for a given Vector. Secondly: within the limit of MAXVL, VL is required to be set to the requested value (by contrast, RVV systems permit the hardware to set arbitrary values of VL). +That said: draft pages for [[sv/setvl]] and [[sv/svp64]] are written up. The `setvl` instruction is pretty much as would be expected from a Cray style VL instruction: the only differences being that, firstly, the MAXVL (Maximum Vector Length) has to be specified, because that determines - precisely - how many of the *scalar* registers are to be used for a given Vector. Secondly: within the limit of MAXVL, VL is required to be set to the requested value (by contrast, RVV systems permit the hardware to set arbitrary values of VL). The other key question is of course: what's the actual instruction format, and what's in it? Bearing in mind that this requires OPF review, the current draft is at the [[sv/svp64]] page, and includes space for all the different modes, the predicates, element width overrides, SUBVL and the register extensions, in 24 bits. This just about fits into an OpenPOWER v3.1B 64 bit Prefix by borrowing some of the Reserved Encoding space.