From: Pedro Alves <palves@redhat.com>
Date: Mon, 27 Oct 2008 11:37:40 +0000 (+0000)
Subject: gdb/
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=f0323ca003dec200b022c6066ab5396a85f753af;p=binutils-gdb.git

gdb/
	* Makefile.in (INSTALLED_LIBS, CLIBS): Remove reference to
	$(TM_CLIBS).
	(CDEPS): Remove reference to $(TM_CDEPS).

gdb/doc/
	* gdbint.texinfo (Adding a New Target): Don't mention TDEPFILES,
	.mt files, TM_CLIBS or TM_CDEPS.
	(x86 Watchpoints): Don't mention TDEPFILES.
---

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 71d09b60fa7..7c79dd5225f 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,9 @@
+2008-10-27  Pedro Alves  <pedro@codesourcery.com>
+
+	* Makefile.in (INSTALLED_LIBS, CLIBS): Remove reference to
+	$(TM_CLIBS).
+	(CDEPS): Remove reference to $(TM_CDEPS).
+
 2008-10-26  Michael Snyder  <msnyder@vmware.com>
 
 	* infrun.c (handle_inferior_event): Handle dynamic symbol
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index 645d9012f95..7bda059ec74 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -411,13 +411,13 @@ INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_
 # If you have the Cygnus libraries installed,
 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
 INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
-	$(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
+	$(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 	-lintl -liberty $(LIBGNU)
 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
-	$(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
+	$(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 	$(LIBICONV) $(LIBEXPAT) \
 	$(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
-CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
+CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
 	$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
 
 ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index 6b0557505c1..363ee18e2ec 100644
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -1,3 +1,9 @@
+2008-10-27  Pedro Alves  <pedro@codesourcery.com>
+
+	* gdbint.texinfo (Adding a New Target): Don't mention TDEPFILES,
+	.mt files, TM_CLIBS or TM_CDEPS.
+	(x86 Watchpoints): Don't mention TDEPFILES.
+
 2008-10-24  Sandra Loosemore  <sandra@codesourcery.com>
 
 	* gdb.texinfo (Remote Protocol): Add new nodes to menu.
diff --git a/gdb/doc/gdbint.texinfo b/gdb/doc/gdbint.texinfo
index 1edb444a4c9..9caff8fe1a1 100644
--- a/gdb/doc/gdbint.texinfo
+++ b/gdb/doc/gdbint.texinfo
@@ -821,8 +821,7 @@ defining @code{I386_USE_GENERIC_WATCHPOINTS}.
 
 @item
 Add @file{i386-nat.o} to the value of the Make variable
-@code{NATDEPFILES} (@pxref{Native Debugging, NATDEPFILES}) or
-@code{TDEPFILES} (@pxref{Target Architecture Definition, TDEPFILES}).
+@code{NATDEPFILES} (@pxref{Native Debugging, NATDEPFILES}).
 
 @item
 Provide implementations for the @code{I386_DR_LOW_*} macros described
@@ -4106,15 +4105,7 @@ Defaults to @code{1}.
 The following files add a target to @value{GDBN}:
 
 @table @file
-@vindex TDEPFILES
-@item gdb/config/@var{arch}/@var{ttt}.mt
-Contains a Makefile fragment specific to this target.  Specifies what
-object files are needed for target @var{ttt}, by defining
-@samp{TDEPFILES=@dots{}} and @samp{TDEPLIBS=@dots{}}.
-
-You can also define @samp{TM_CLIBS} and @samp{TM_CDEPS}, but these are
-now deprecated, replaced by autoconf, and may go away in future
-versions of @value{GDBN}.
+@cindex target dependent files
 
 @item gdb/@var{ttt}-tdep.c
 Contains any miscellaneous code required for this target machine.  On