From: Thomas Petazzoni Date: Wed, 7 Mar 2018 20:30:48 +0000 (+0100) Subject: configs/riotboard: remove defconfig X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=f124c2f0765b1098f86cca71f2df18d1788cba57;p=buildroot.git configs/riotboard: remove defconfig This defconfig fails to build with gcc 6.x, even though we switched to using gcc 6.x as the default gcc version in May 2017. This defconfig also hasn't seen any non-mechanical update since November 2015. So it's time to get rid of it, in order to remove the following build failure: https://gitlab.com/buildroot.org/buildroot/-/jobs/55306938 Signed-off-by: Thomas Petazzoni Signed-off-by: Peter Korsgaard --- diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 808d66c156..4cdaa09da5 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -214,7 +214,6 @@ raspberrypi3_64_defconfig: *defconfig raspberrypi3_defconfig: *defconfig raspberrypi3_qt5we_defconfig: *defconfig raspberrypi_defconfig: *defconfig -riotboard_defconfig: *defconfig roseapplepi_defconfig: *defconfig s6lx9_microboard_defconfig: *defconfig sheevaplug_defconfig: *defconfig diff --git a/board/embest/riotboard/readme.txt b/board/embest/riotboard/readme.txt deleted file mode 100644 index b7390d0d57..0000000000 --- a/board/embest/riotboard/readme.txt +++ /dev/null @@ -1,46 +0,0 @@ -Buildroot for Embest RIoTboard -============================== - -1. Compiling buildroot ----------------------- - -make riotboard_defconfig -make - -2. Installing buildroot ------------------------ - -Prepare an SD-card and plug it into your card reader. Write the bootloader to -your SD-card: - -sudo dd if=output/images/u-boot.imx of=/dev/sdX bs=1k seek=1 - -Create 1 partition on the SD-card using your favourite tool. The -partition should be big enough to hold your rootfs, for example -128MiB. Here's an example partition layout: - - Device Boot Start End Blocks Id System -/dev/sdX1 2048 264191 131072 83 Linux - -Format the SD-card partition with your favourite filesystem: - -sudo mkfs.ext2 /dev/sdX1 - -Deploy your rootfs to the SD-card: - -sudo mkdir /mnt/sdcard/ -sudo mount /dev/sdX1 /mnt/sdcard/ -sudo tar xf output/images/rootfs.tar -C /mnt/sdcard/ -sudo umount /dev/sdX1 - -3. Running buildroot --------------------- - -Position the board so you can read the label "RIoTboard" on the right side of -SW1 DIP switches. Configure the SW1 swiches like this: - -10100101 (1 means ON position, 0 means OFF position) - -Now plug your prepared SD-card in slot J6. Connect a serial console (115200, 8, -N, 1) to header J18. Connect a 5V/1A power supply to the board and enjoy your -new toy. diff --git a/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf b/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf deleted file mode 100644 index c7d32e0097..0000000000 --- a/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf +++ /dev/null @@ -1,6 +0,0 @@ -default buildroot - -label buildroot -kernel /boot/uImage -devicetree /boot/imx6dl-riotboard.dtb -append console=ttymxc1,115200 root=/dev/mmcblk0p1 rw diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig deleted file mode 100644 index c2281058f5..0000000000 --- a/configs/riotboard_defconfig +++ /dev/null @@ -1,36 +0,0 @@ -# architecture -BR2_arm=y -BR2_cortex_a9=y -BR2_ARM_ENABLE_NEON=y -BR2_ARM_ENABLE_VFP=y -BR2_ARM_FPU_VFPV3=y - -# system -BR2_TARGET_GENERIC_GETTY=y -BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1" - -# rootfs -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_2r1=y -BR2_ROOTFS_OVERLAY="board/embest/riotboard/rootfs_overlay" - -# bootloader -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2015.10" -BR2_TARGET_UBOOT_BOARDNAME="riotboard" -BR2_TARGET_UBOOT_FORMAT_IMX=y - -# Linux headers same as kernel, a 4.2 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y - -# kernel -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2.6" -BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" -BR2_LINUX_KERNEL_UIMAGE=y -BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-riotboard" -BR2_LINUX_KERNEL_INSTALL_TARGET=y