From: Sergey Matyukevich Date: Fri, 25 Jun 2021 19:33:18 +0000 (+0300) Subject: configs/orangepi-zero-plus2: bump BSP versions X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=f579afc3930506311068a6f2575a487a5bc8c8e1;p=buildroot.git configs/orangepi-zero-plus2: bump BSP versions Bump U-Boot and Linux kernel versions. Updating U-Boot to 2021.04 requires the following two changes. First, after switching to binman, u-boot.itb is no more generated for 64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should be used instead. This image contains SPL, U-Boot, and FIT image, where FIT image contains other binaries such as BL31 and SCP. Second, new U-Boot enables support for System Control Processor (SCP) firmware. SCP firmware is included by default into FIT image in the combined u-boot-sunxi-with-spl.bin binary. When SCP is not available or not needed, it should be explicitly disabled by pointing to an empty file. Support for Allwinner SCP firmware is not yet available neither in Buildroot nor in mainline kernel. So disable it for now using custom U-Boot build options. Signed-off-by: Sergey Matyukevich Signed-off-by: Yann E. MORIN --- diff --git a/board/orangepi/orangepi-zero-plus2/genimage.cfg b/board/orangepi/orangepi-zero-plus2/genimage.cfg index 98ebf5b475..255acdbecb 100644 --- a/board/orangepi/orangepi-zero-plus2/genimage.cfg +++ b/board/orangepi/orangepi-zero-plus2/genimage.cfg @@ -19,15 +19,9 @@ image sdcard.img { partition spl { in-partition-table = "no" - image = "sunxi-spl.bin" + image = "u-boot-sunxi-with-spl.bin" offset = 8192 - } - - partition u-boot { - in-partition-table = "no" - image = "u-boot.itb" - offset = 40K - size = 1024000 # 1MB - 40K + 16K(GPT) + size = 1056768 # 1MB - 8K + 16K(GPT) } partition boot { diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig index 3085dfe08c..da2d3b4178 100644 --- a/configs/orangepi_zero_plus2_defconfig +++ b/configs/orangepi_zero_plus2_defconfig @@ -2,7 +2,7 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_12=y BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y BR2_ROOTFS_OVERLAY="board/orangepi/orangepi-zero-plus2/rootfs_overlay" @@ -17,16 +17,15 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2021.04" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_zero_plus2" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYTHON3=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y -BR2_TARGET_UBOOT_FORMAT_CUSTOM=y -BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" BR2_TARGET_UBOOT_SPL=y -BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin" +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" +BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null" BR2_PACKAGE_HOST_UBOOT_TOOLS=y BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-zero-plus2/boot.cmd" @@ -34,7 +33,7 @@ BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-zero-pl # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.10" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.12.10" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-zero-plus2"