From: Florent Kermarrec Date: Thu, 6 Feb 2020 16:00:04 +0000 (+0100) Subject: soc/cores/i2s: cleanup pass, rename to S7I2SSlave (since 7-Series specific for now... X-Git-Tag: 24jan2021_ls180~687 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=f58e8188b7ed18593f762ccefff2f96b5848e454;p=litex.git soc/cores/i2s: cleanup pass, rename to S7I2SSlave (since 7-Series specific for now), rename fifodepth to fifo_depth for consistency with others cores. --- diff --git a/litex/soc/cores/i2s.py b/litex/soc/cores/i2s.py index 512b2164..96011ad3 100644 --- a/litex/soc/cores/i2s.py +++ b/litex/soc/cores/i2s.py @@ -1,104 +1,110 @@ # This file is Copyright (c) 2020 bunnie # License: BSD -from litex.soc.interconnect.csr_eventmanager import * +from migen.genlib.cdc import MultiReg + from litex.soc.interconnect import wishbone +from litex.soc.interconnect.csr_eventmanager import * + from litex.soc.integration.doc import AutoDoc, ModuleDoc -from migen.genlib.cdc import MultiReg -class i2s_slave(Module, AutoCSR, AutoDoc): - def __init__(self, pads, fifodepth=256): + +class S7I2SSlave(Module, AutoCSR, AutoDoc): + def __init__(self, pads, fifo_depth=256): self.intro = ModuleDoc(""" Intro ******* - - I2S slave creates a slave audio interface instance. Tx and Rx interfaces are inferred - based upon the presence or absence of the respective pins in the "pads" argument. - - The interface is I2S-like, but note the deviation that the bits are justified - left without a 1-bit pad after sync edges. This isn't a problem for talking to the LM49352 - codec this was designed for, as the bit offset is programmable, but this will not work well if - are talking to a CODEC without a programmable bit offset! - + + I2S slave creates a slave audio interface instance. Tx and Rx interfaces are inferred based + upon the presence or absence of the respective pins in the "pads" argument. + + The interface is I2S-like, but note the deviation that the bits are justified left without a + 1-bit pad after sync edges. This isn't a problem for talking to the LM49352 codec this was + designed for, as the bit offset is programmable, but this will not work well if are talking + to a CODEC without a programmable bit offset! + System Interface ================= - + Audio interchange is done with the system using 16-bit stereo samples, with the right channel mapped to the least significant word of a 32-bit word. Thus each 32-bit word is a single - stereo sample. As this is a slave I2S interface, sampling rate and framing is set by the programming - of the audio CODEC chip. A slave situation is preferred because this defers the generation of - audio clocks to the CODEC, which has PLLs specialized to generate the correct frequencies for - audio sampling rates. - - `fifodepth` is the depth at which either a read interrupt is fired (guaranteeing at least `fifodepth` - stereo samples in the receive FIFO) or a write interrupt is fired (guaranteeing at least `fifodepth` - free space in the transmit FIFO). The maximum depth is 512. - + stereo sample. As this is a slave I2S interface, sampling rate and framing is set by the + programming of the audio CODEC chip. A slave situation is preferred because this defers the + generation of audio clocks to the CODEC, which has PLLs specialized to generate the correct + frequencies for audio sampling rates. + + `fifo_depth` is the depth at which either a read interrupt is fired (guaranteeing at least + `fifo_depth` stereo samples in the receive FIFO) or a write interrupt is fired (guaranteeing + at least `fifo_depth` free space in the transmit FIFO). The maximum depth is 512. + To receive audio data: - + - reset the Rx FIFO, to guarantee all pointers at zero - hook the Rx full interrupt with an interrupt handler (optional) - if the CODEC is not yet transmitting data, initiate data transmission - enable Rx FIFO to run - - poll or wait for interrupt; upon interrupt, read `fifodepth` words. Repeat. + - poll or wait for interrupt; upon interrupt, read `fifo_depth` words. Repeat. - to close the stream, simply clear the Rx FIFO enable bit. The next initiation should call a - reset of the FIFO to ensure leftover previous data is cleared from the FIFO. - + reset of the FIFO to ensure leftover previous data is cleared from the FIFO. + To transmit audio data: - + - reset the Tx FIFO, to guarantee all pointers at zero - hook the Tx available interrupt with an interrupt handler (optional) - write 512 words of data into the Tx FIFO, filling it to the max - - if the CODEC is not yet requesting data and unmuted, unmute and initiate reception + - if the CODEC is not yet requesting data and unmuted, unmute and initiate reception - enable the Tx FIFO to run - - poll or wait for interrupt; upon interrupt, write `fifodepth` words. Repeat. - - to close stream, mute the DAC and stop the request clock. Ideally, this can be completed before - the FIFO is emptied, so there is no jarring pop or truncation of data - - stop FIFO running. Next initiation should reset the FIFO to ensure leftover previous data in - FIFO is cleared. - + - poll or wait for interrupt; upon interrupt, write `fifo_depth` words. Repeat. + - to close stream, mute the DAC and stop the request clock. Ideally, this can be completed + before the FIFO is emptied, so there is no jarring pop or truncation of data + - stop FIFO running. Next initiation should reset the FIFO to ensure leftover previous data + in FIFO is cleared. + CODEC Interface ================ - - The interface assumes we have a sysclk domain running around 100MHz, and that our typical - max audio rate is 44.1kHz * 24bits * 2channels = 2.1168MHz audio clock. Thus, the architecture + + The interface assumes we have a sysclk domain running around 100MHz, and that our typical max + audio rate is 44.1kHz * 24bits * 2channels = 2.1168MHz audio clock. Thus, the architecture treats the audio clock and data as asynchronous inputs that are MultiReg-syncd into the clock domain. Probably the slowest sysclk rate this might work with is around 20-25MHz (10x over sampling), but at 100MHz things will be quite comfortable. - + The upside of the fully asynchronous implementation is that we can leave the I/O unconstrained, giving the place/route more latitude to do its job. - + Here's the timing format targeted by this I2S interface: - + .. wavedrom:: :caption: Timing format of the I2S interface { "signal" : [ { "name": "clk", "wave": "n....|.......|......" }, { "name": "sync", "wave": "1.0..|....1..|....0." }, - { "name": "tx/rx", "wave": ".====|==x.===|==x.=x", "data": ["L15", "L14", "...", "L1", "L0", "R15", "R14", "...", "R1", "R0", "L15"] }, + { "name": "tx/rx", "wave": ".====|==x.===|==x.=x", "data": + ["L15", "L14", "...", "L1", "L0", "R15", "R14", "...", "R1", "R0", "L15"] }, ]} - + - Data is updated on the falling edge - Data is sampled on the rising edge - - Words are MSB-to-LSB, left-justified (**NOTE: this is a deviation from strict I2S, which offsets by 1 from the left**) + - Words are MSB-to-LSB, left-justified (**NOTE: this is a deviation from strict I2S, which + offsets by 1 from the left**) - Sync is an input (FPGA is slave, codec is master): low => left channel, high => right channel - Sync can be longer than the wordlen, extra bits are just ignored - Tx is data to the codec (SDI pin on LM49352) - Rx is data from the codec (SDO pin on LM49352) - + """) - # one cache line is 8 32-bit words, need to always have enough space for one line or else nothing works - if fifodepth > 504: - fifodepth = 504 + # One cache line is 8 32-bit words, need to always have enough space for one line or else + # nothing works + if fifo_depth > 504: + fifo_depth = 504 print("I2S warning: fifo depth greater than 504 selected; truncating to 504") - if fifodepth < 8: - fifodepth = 8 + if fifo_depth < 8: + fifo_depth = 8 print("I2S warning: fifo depth less than 8 selected; truncating to 8") - # connect pins, synchronizers, and edge detectors + # Connect pins, synchronizers, and edge detectors if hasattr(pads, 'tx'): tx_pin = Signal() self.comb += pads.tx.eq(tx_pin) @@ -112,67 +118,67 @@ class i2s_slave(Module, AutoCSR, AutoDoc): self.specials += MultiReg(pads.clk, clk_pin) clk_d = Signal() self.sync += clk_d.eq(clk_pin) - rising_edge = Signal() + rising_edge = Signal() falling_edge = Signal() self.comb += [rising_edge.eq(clk_pin & ~clk_d), falling_edge.eq(~clk_pin & clk_d)] - # wishbone bus - self.bus = wishbone.Interface() + # Wishbone bus + self.bus = bus = wishbone.Interface() rd_ack = Signal() wr_ack = Signal() self.comb +=[ - If(self.bus.we, - self.bus.ack.eq(wr_ack), + If(bus.we, + bus.ack.eq(wr_ack), ).Else( - self.bus.ack.eq(rd_ack), + bus.ack.eq(rd_ack), ) ] - # interrupts + # Interrupts self.submodules.ev = EventManager() if hasattr(pads, 'rx'): - self.ev.rx_ready = EventSourcePulse(description="Indicates FIFO is ready to read") # rising edge triggered + self.ev.rx_ready = EventSourcePulse(description="Indicates FIFO is ready to read") # Rising edge triggered self.ev.rx_error = EventSourcePulse(description="Indicates an Rx error has happened (over/underflow)") if hasattr(pads, 'tx'): - self.ev.tx_ready = EventSourcePulse(description="Indicates enough space available for next Tx quanta of {} words".format(fifodepth)) + self.ev.tx_ready = EventSourcePulse(description="Indicates enough space available for next Tx quanta of {} words".format(fifo_depth)) self.ev.tx_error = EventSourcePulse(description="Indicates a Tx error has happened (over/underflow") self.ev.finalize() # build the RX subsystem if hasattr(pads, 'rx'): - rx_rd_d = Signal(32) - rx_almostfull = Signal() + rx_rd_d = Signal(32) + rx_almostfull = Signal() rx_almostempty = Signal() - rx_full = Signal() - rx_empty = Signal() - rx_rdcount = Signal(9) - rx_rderr = Signal() - rx_wrerr = Signal() - rx_wrcount = Signal(9) - rx_rden = Signal() - rx_wr_d = Signal(32) - rx_wren = Signal() + rx_full = Signal() + rx_empty = Signal() + rx_rdcount = Signal(9) + rx_rderr = Signal() + rx_wrerr = Signal() + rx_wrcount = Signal(9) + rx_rden = Signal() + rx_wr_d = Signal(32) + rx_wren = Signal() self.rx_ctl = CSRStorage(description="Rx data path control", fields=[ CSRField("enable", size=1, description="Enable the receiving data"), - CSRField("reset", size=1, description="Writing `1` resets the FIFO. Reset happens regardless of enable state.", pulse=1) + CSRField("reset", size=1, description="Writing `1` resets the FIFO. Reset happens regardless of enable state.", pulse=1) ]) self.rx_stat = CSRStatus(description="Rx data path status", fields=[ - CSRField("overflow", size=1, description="Rx overflow"), + CSRField("overflow", size=1, description="Rx overflow"), CSRField("underflow", size=1, description="Rx underflow"), - CSRField("dataready", size=1, description="{} words of data loaded and ready to read".format(fifodepth)), - CSRField("empty", size=1, description="No data available in FIFO to read"), # next flags probably never used - CSRField("wrcount", size=9, description="Write count"), - CSRField("rdcount", size=9, description="Read count"), - CSRField("fifodepth", size=9, description="FIFO depth as synthesized") + CSRField("dataready", size=1, description="{} words of data loaded and ready to read".format(fifo_depth)), + CSRField("empty", size=1, description="No data available in FIFO to read"), # next flags probably never used + CSRField("wrcount", size=9, description="Write count"), + CSRField("rdcount", size=9, description="Read count"), + CSRField("fifo_depth", size=9, description="FIFO depth as synthesized") ]) - self.comb += self.rx_stat.fields.fifodepth.eq(fifodepth) + self.comb += self.rx_stat.fields.fifo_depth.eq(fifo_depth) rx_rst_cnt = Signal(3) - rx_reset = Signal() + rx_reset = Signal() self.sync += [ If(self.rx_ctl.fields.reset, rx_rst_cnt.eq(5), # 5 cycles reset required by design @@ -186,19 +192,30 @@ class i2s_slave(Module, AutoCSR, AutoDoc): ) ) ] - # at a width of 32 bits, an 18kiB fifo is 512 entries deep + # At a width of 32 bits, an 18kiB fifo is 512 entries deep self.specials += Instance("FIFO_SYNC_MACRO", - p_DEVICE="7SERIES", p_FIFO_SIZE="18Kb", p_DATA_WIDTH=32, - p_ALMOST_EMPTY_OFFSET=8, p_ALMOST_FULL_OFFSET=(512 - fifodepth), - p_DO_REG=0, - - o_ALMOSTFULL=rx_almostfull, o_ALMOSTEMPTY=rx_almostempty, - o_DO=rx_rd_d, o_EMPTY=rx_empty, o_FULL=rx_full, - o_RDCOUNT=rx_rdcount, o_RDERR=rx_rderr, o_WRCOUNT=rx_wrcount, o_WRERR=rx_wrerr, - i_DI=rx_wr_d, i_CLK=ClockSignal(), i_RDEN=rx_rden & ~rx_reset, - i_WREN=rx_wren & ~rx_reset, i_RST=rx_reset, + p_DEVICE = "7SERIES", + p_FIFO_SIZE = "18Kb", + p_DATA_WIDTH = 32, + p_ALMOST_EMPTY_OFFSET = 8, + p_ALMOST_FULL_OFFSET = (512 - fifo_depth), + p_DO_REG = 0, + i_CLK = ClockSignal(), + i_RST = rx_reset, + o_ALMOSTFULL = rx_almostfull, + o_ALMOSTEMPTY = rx_almostempty, + o_FULL = rx_full, + o_EMPTY = rx_empty, + i_WREN = rx_wren & ~rx_reset, + i_DI = rx_wr_d, + i_RDEN = rx_rden & ~rx_reset, + o_DO = rx_rd_d, + o_RDCOUNT = rx_rdcount, + o_RDERR = rx_rderr, + o_WRCOUNT = rx_wrcount, + o_WRERR = rx_wrerr, ) - self.comb += [ # wire up the status signals and interrupts + self.comb += [ # Wire up the status signals and interrupts self.rx_stat.fields.overflow.eq(rx_wrerr), self.rx_stat.fields.underflow.eq(rx_rderr), self.rx_stat.fields.dataready.eq(rx_almostfull), @@ -207,19 +224,21 @@ class i2s_slave(Module, AutoCSR, AutoDoc): self.ev.rx_ready.trigger.eq(rx_almostfull), self.ev.rx_error.trigger.eq(rx_wrerr | rx_rderr), ] - bus_read = Signal() - bus_read_d = Signal() + bus_read = Signal() + bus_read_d = Signal() rd_ack_pipe = Signal() - self.comb += bus_read.eq(self.bus.cyc & self.bus.stb & ~self.bus.we & (self.bus.cti == 0)) - self.sync += [ # this is the bus responder -- only works for uncached memory regions + self.comb += bus_read.eq(bus.cyc & bus.stb & ~bus.we & (bus.cti == 0)) + self.sync += [ # This is the bus responder -- only works for uncached memory regions bus_read_d.eq(bus_read), - If(bus_read & ~bus_read_d, # one response, one cycle + If(bus_read & ~bus_read_d, # One response, one cycle rd_ack_pipe.eq(1), If(~rx_empty, - self.bus.dat_r.eq(rx_rd_d), + bus.dat_r.eq(rx_rd_d), rx_rden.eq(1), ).Else( - self.bus.dat_r.eq(0xDEADBEEF), # don't stall the bus indefinitely if we try to read from an empty fifo...just return garbage + # Don't stall the bus indefinitely if we try to read from an empty fifo...just + # return garbage + bus.dat_r.eq(0xdeadbeef), rx_rden.eq(0), ) ).Else( @@ -232,97 +251,107 @@ class i2s_slave(Module, AutoCSR, AutoDoc): rx_cnt = Signal(5) self.submodules.rxi2s = rxi2s = FSM(reset_state="IDLE") rxi2s.act("IDLE", - NextValue(rx_wr_d, 0), - If(self.rx_ctl.fields.enable, - If(rising_edge & sync_pin, # wait_sync guarantees we start at the beginning of a left frame, and not in the middle - NextState("WAIT_SYNC"), - ) - ) + NextValue(rx_wr_d, 0), + If(self.rx_ctl.fields.enable, + # Wait_sync guarantees we start at the beginning of a left frame, and not in + # the middle + If(rising_edge & sync_pin, + NextState("WAIT_SYNC") + ) + ) ), rxi2s.act("WAIT_SYNC", - If(rising_edge & ~sync_pin, - NextState("LEFT"), - NextValue(rx_cnt, 16), - ), + If(rising_edge & ~sync_pin, + NextState("LEFT"), + NextValue(rx_cnt, 16) + ), ) rxi2s.act("LEFT", - If(~self.rx_ctl.fields.enable, NextState("IDLE")).Else( - NextValue(rx_wr_d, Cat(rx_pin, rx_wr_d[:-1])), - NextValue(rx_cnt, rx_cnt - 1), - NextState("LEFT_WAIT"), - ) + If(~self.rx_ctl.fields.enable, + NextState("IDLE") + ).Else( + NextValue(rx_wr_d, Cat(rx_pin, rx_wr_d[:-1])), + NextValue(rx_cnt, rx_cnt - 1), + NextState("LEFT_WAIT") + ) ) rxi2s.act("LEFT_WAIT", - If(~self.rx_ctl.fields.enable, NextState("IDLE")).Else( - If(rising_edge, - If((rx_cnt == 0) & sync_pin, - NextValue(rx_cnt, 16), - NextState("RIGHT") - ).Elif(rx_cnt > 0, - NextState("LEFT"), - ) - ) - ) + If(~self.rx_ctl.fields.enable, + NextState("IDLE") + ).Else( + If(rising_edge, + If((rx_cnt == 0) & sync_pin, + NextValue(rx_cnt, 16), + NextState("RIGHT") + ).Elif(rx_cnt > 0, + NextState("LEFT") + ) + ) + ) ) rxi2s.act("RIGHT", - If(~self.rx_ctl.fields.enable, NextState("IDLE")).Else( - NextValue(rx_wr_d, Cat(rx_pin, rx_wr_d[:-1])), - NextValue(rx_cnt, rx_cnt - 1), - NextState("RIGHT_WAIT"), - ) + If(~self.rx_ctl.fields.enable, + NextState("IDLE") + ).Else( + NextValue(rx_wr_d, Cat(rx_pin, rx_wr_d[:-1])), + NextValue(rx_cnt, rx_cnt - 1), + NextState("RIGHT_WAIT") + ) ) rxi2s.act("RIGHT_WAIT", - If(~self.rx_ctl.fields.enable, NextState("IDLE")).Else( - If(rising_edge, - If((rx_cnt == 0) & ~sync_pin, - NextValue(rx_cnt, 16), - NextState("LEFT"), - rx_wren.eq(1), # pulse rx_wren to write the current data word - ).Elif(rx_cnt > 0, - NextState("RIGHT"), - ) - ) - ) + If(~self.rx_ctl.fields.enable, + NextState("IDLE") + ).Else( + If(rising_edge, + If((rx_cnt == 0) & ~sync_pin, + NextValue(rx_cnt, 16), + NextState("LEFT"), + rx_wren.eq(1) # Pulse rx_wren to write the current data word + ).Elif(rx_cnt > 0, + NextState("RIGHT") + ) + ) + ) ) - # build the TX subsystem + # Build the TX subsystem if hasattr(pads, 'tx'): - tx_rd_d = Signal(32) - tx_almostfull = Signal() + tx_rd_d = Signal(32) + tx_almostfull = Signal() tx_almostempty = Signal() - tx_full = Signal() - tx_empty = Signal() - tx_rdcount = Signal(9) - tx_rderr = Signal() - tx_wrerr = Signal() - tx_wrcount = Signal(9) - tx_rden = Signal() - tx_wr_d = Signal(32) - tx_wren = Signal() + tx_full = Signal() + tx_empty = Signal() + tx_rdcount = Signal(9) + tx_rderr = Signal() + tx_wrerr = Signal() + tx_wrcount = Signal(9) + tx_rden = Signal() + tx_wr_d = Signal(32) + tx_wren = Signal() self.tx_ctl = CSRStorage(description="Tx data path control", fields=[ CSRField("enable", size=1, description="Enable the transmission data"), - CSRField("reset", size=1, description="Writing `1` resets the FIFO. Reset happens regardless of enable state.", pulse=1) + CSRField("reset", size=1, description="Writing `1` resets the FIFO. Reset happens regardless of enable state.", pulse=1) ]) self.tx_stat = CSRStatus(description="Tx data path status", fields=[ - CSRField("overflow", size=1, description="Tx overflow"), - CSRField("underflow", size=1, description="Tx underflow"), - CSRField("free", size=1, description="At least {} words of space free".format(fifodepth)), + CSRField("overflow", size=1, description="Tx overflow"), + CSRField("underflow", size=1, description="Tx underflow"), + CSRField("free", size=1, description="At least {} words of space free".format(fifo_depth)), CSRField("almostfull", size=1, description="Less than 8 words space available"), # the next few flags should be rarely used - CSRField("full", size=1, description="FIFO is full or overfull"), - CSRField("empty", size=1, description="FIFO is empty"), - CSRField("wrcount", size=9, description="Tx write count"), - CSRField("rdcount", size=9, description="Tx read count"), + CSRField("full", size=1, description="FIFO is full or overfull"), + CSRField("empty", size=1, description="FIFO is empty"), + CSRField("wrcount", size=9, description="Tx write count"), + CSRField("rdcount", size=9, description="Tx read count"), ]) tx_rst_cnt = Signal(3) - tx_reset = Signal() + tx_reset = Signal() self.sync += [ If(self.tx_ctl.fields.reset, - tx_rst_cnt.eq(5), # 5 cycles reset required by design + tx_rst_cnt.eq(5), # 5 cycles reset required by design tx_reset.eq(1) ).Else( If(tx_rst_cnt == 0, @@ -333,19 +362,31 @@ class i2s_slave(Module, AutoCSR, AutoDoc): ) ) ] - # at a width of 32 bits, an 18kiB fifo is 512 entries deep + # At a width of 32 bits, an 18kiB fifo is 512 entries deep self.specials += Instance("FIFO_SYNC_MACRO", - p_DEVICE="7SERIES", p_FIFO_SIZE="18Kb", p_DATA_WIDTH=32, - p_ALMOST_EMPTY_OFFSET=fifodepth, p_ALMOST_FULL_OFFSET=8, - p_DO_REG=0, - - o_ALMOSTFULL=tx_almostfull, o_ALMOSTEMPTY=tx_almostempty, - o_DO=tx_rd_d, o_EMPTY=tx_empty, o_FULL=tx_full, - o_RDCOUNT=tx_rdcount, o_RDERR=tx_rderr, o_WRCOUNT=tx_wrcount, o_WRERR=tx_wrerr, - i_DI=tx_wr_d, i_CLK=ClockSignal(), i_RDEN=tx_rden & ~tx_reset, - i_WREN=tx_wren & ~tx_reset, i_RST=tx_reset, + p_DEVICE = "7SERIES", + p_FIFO_SIZE = "18Kb", + p_DATA_WIDTH = 32, + p_ALMOST_EMPTY_OFFSET = fifo_depth, + p_ALMOST_FULL_OFFSET = 8, + p_DO_REG = 0, + i_CLK = ClockSignal(), + i_RST = tx_reset, + o_ALMOSTFULL = tx_almostfull, + o_ALMOSTEMPTY = tx_almostempty, + o_FULL = tx_full, + o_EMPTY = tx_empty, + i_WREN = tx_wren & ~tx_reset, + i_DI = tx_wr_d, + i_RDEN = tx_rden & ~tx_reset, + o_DO = tx_rd_d, + o_RDCOUNT = tx_rdcount, + o_RDERR = tx_rderr, + o_WRCOUNT = tx_wrcount, + o_WRERR = tx_wrerr, ) - self.comb += [ # wire up the status signals and interrupts + + self.comb += [ # Wire up the status signals and interrupts self.tx_stat.fields.overflow.eq(tx_wrerr), self.tx_stat.fields.underflow.eq(tx_rderr), self.tx_stat.fields.free.eq(tx_almostempty), @@ -357,10 +398,12 @@ class i2s_slave(Module, AutoCSR, AutoDoc): self.ev.tx_ready.trigger.eq(tx_almostempty), self.ev.tx_error.trigger.eq(tx_wrerr | tx_rderr), ] - self.sync += [ # this is the bus responder -- need to check how this interacts with uncached memory region - If(self.bus.cyc & self.bus.stb & self.bus.we & ~self.bus.ack, + self.sync += [ + # This is the bus responder -- need to check how this interacts with uncached memory + # region + If(bus.cyc & bus.stb & bus.we & ~bus.ack, If(~tx_full, - tx_wr_d.eq(self.bus.dat_w), + tx_wr_d.eq(bus.dat_w), tx_wren.eq(1), wr_ack.eq(1), ).Else( @@ -377,59 +420,67 @@ class i2s_slave(Module, AutoCSR, AutoDoc): tx_buf = Signal(32) self.submodules.txi2s = txi2s = FSM(reset_state="IDLE") txi2s.act("IDLE", - If(self.tx_ctl.fields.enable, - If(falling_edge & sync_pin, - NextState("WAIT_SYNC"), - ) - ) + If(self.tx_ctl.fields.enable, + If(falling_edge & sync_pin, + NextState("WAIT_SYNC"), + ) + ) ), txi2s.act("WAIT_SYNC", - If(falling_edge & ~sync_pin, - NextState("LEFT"), - NextValue(tx_cnt, 16), - NextValue(tx_buf, tx_rd_d), - tx_rden.eq(1), - ), + If(falling_edge & ~sync_pin, + NextState("LEFT"), + NextValue(tx_cnt, 16), + NextValue(tx_buf, tx_rd_d), + tx_rden.eq(1) + ) ) txi2s.act("LEFT", - If(~self.tx_ctl.fields.enable, NextState("IDLE")).Else( - NextValue(tx_pin, tx_buf[31]), - NextValue(tx_buf, Cat(0, tx_buf[:-1])), - NextValue(tx_cnt, tx_cnt - 1), - NextState("LEFT_WAIT"), - ) + If(~self.tx_ctl.fields.enable, + NextState("IDLE") + ).Else( + NextValue(tx_pin, tx_buf[31]), + NextValue(tx_buf, Cat(0, tx_buf[:-1])), + NextValue(tx_cnt, tx_cnt - 1), + NextState("LEFT_WAIT") + ) ) txi2s.act("LEFT_WAIT", - If(~self.tx_ctl.fields.enable, NextState("IDLE")).Else( - If(falling_edge, - If((tx_cnt == 0) & sync_pin, - NextValue(tx_cnt, 16), - NextState("RIGHT") - ).Elif(tx_cnt > 0, - NextState("LEFT"), - ) - ) - ) + If(~self.tx_ctl.fields.enable, + NextState("IDLE") + ).Else( + If(falling_edge, + If((tx_cnt == 0) & sync_pin, + NextValue(tx_cnt, 16), + NextState("RIGHT") + ).Elif(tx_cnt > 0, + NextState("LEFT") + ) + ) + ) ) txi2s.act("RIGHT", - If(~self.tx_ctl.fields.enable, NextState("IDLE")).Else( - NextValue(tx_pin, tx_buf[31]), - NextValue(tx_buf, Cat(0, tx_buf[:-1])), - NextValue(tx_cnt, tx_cnt - 1), - NextState("RIGHT_WAIT"), - ) + If(~self.tx_ctl.fields.enable, + NextState("IDLE") + ).Else( + NextValue(tx_pin, tx_buf[31]), + NextValue(tx_buf, Cat(0, tx_buf[:-1])), + NextValue(tx_cnt, tx_cnt - 1), + NextState("RIGHT_WAIT") + ) ) txi2s.act("RIGHT_WAIT", - If(~self.tx_ctl.fields.enable, NextState("IDLE")).Else( - If(falling_edge, - If((tx_cnt == 0) & ~sync_pin, - NextValue(tx_cnt, 16), - NextState("LEFT"), - NextValue(tx_buf, tx_rd_d), - tx_rden.eq(1), - ).Elif(tx_cnt > 0, - NextState("RIGHT"), - ) - ) - ) - ) \ No newline at end of file + If(~self.tx_ctl.fields.enable, + NextState("IDLE") + ).Else( + If(falling_edge, + If((tx_cnt == 0) & ~sync_pin, + NextValue(tx_cnt, 16), + NextState("LEFT"), + NextValue(tx_buf, tx_rd_d), + tx_rden.eq(1) + ).Elif(tx_cnt > 0, + NextState("RIGHT") + ) + ) + ) + ) diff --git a/test/test_i2s.py b/test/test_i2s.py new file mode 100644 index 00000000..06b66021 --- /dev/null +++ b/test/test_i2s.py @@ -0,0 +1,15 @@ +# This file is Copyright (c) 2020 Florent Kermarrec +# License: BSD + +import unittest + +from migen import * + +from litex.soc.cores.i2s import S7I2SSlave + + +class TestI2S(unittest.TestCase): + def test_s7i2sslave_syntax(self): + i2s_pads = Record([("rx", 1), ("tx", 1), ("sync", 1), ("clk", 1)]) + i2s = S7I2SSlave(pads=i2s_pads, fifo_depth=256) +