From: Andrey Miroshnikov Date: Tue, 10 May 2022 14:21:05 +0000 (+0100) Subject: Clean up gpio code X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=f622dbb38415fa881f3b6b18a9c4b60e5c60106b;p=pinmux.git Clean up gpio code --- diff --git a/src/spec/simple_gpio.py b/src/spec/simple_gpio.py index d99f281..bf45432 100644 --- a/src/spec/simple_gpio.py +++ b/src/spec/simple_gpio.py @@ -56,7 +56,6 @@ class SimpleGPIO(Elaboratable): spec.mask_wid = 4 spec.reg_wid = wordsize*8 # 32 self.bus = Record(make_wb_layout(spec), name="gpio_wb") - #self.wb_rd_data_reg = Signal(self.wordsize*8) # same len as WB bus #print("CSRBUS layout: ", csrbus_layout) # MultiCSR read and write buses @@ -68,9 +67,9 @@ class SimpleGPIO(Elaboratable): temp = [] for i in range(self.wordsize): - temp_str = "word{}".format(i) + temp_str = "wr_word{}".format(i) temp.append(Record(name=temp_str, layout=csrbus_layout)) - self.multicsrbus = Array(temp) + self.wr_multicsr = Array(temp) temp = [] for i in range(self.n_gpio): @@ -85,11 +84,10 @@ class SimpleGPIO(Elaboratable): bus = self.bus wb_rd_data = bus.dat_r wb_wr_data = bus.dat_w - #wb_rd_data_reg = self.wb_rd_data_reg wb_ack = bus.ack gpio_ports = self.gpio_ports - multi = self.multicsrbus + wr_multi = self.wr_multicsr rd_multi = self.rd_multicsr # Flag for indicating rd/wr transactions @@ -99,33 +97,29 @@ class SimpleGPIO(Elaboratable): with m.If(bus.cyc & bus.stb): # TODO: is this needed anymore? sync += new_transaction.eq(1) - # Concatinate the GPIO configs that are on the same "row" or - # address and send - #multi_cat = [] - #for i in range(0, self.wordsize): - # multi_cat.append(rd_multi[i]) - #sync += wb_rd_data_reg.eq(Cat(multi_cat)) + with m.If(bus.we): # write sync += wb_ack.eq(1) # always ack, always delayed - # Configure CSR - for byte in range(0, self.wordsize): - # TODO: wasteful... convert to Cat(), somehow - sync += multi[byte].eq(wb_wr_data[byte*8:8+byte*8]) - # sync += Cat(*multi).eq(wb_wr_data) + # Split the WB data into bytes for individual GPIOs + sync += Cat(*wr_multi).eq(wb_wr_data) with m.Else(): + # Update the read multi bus with current GPIO configs + # not ack'ing as we need to wait 1 clk cycle before data ready self.connect_gpio_to_rd_bus(m, sync, bus.adr, gpio_ports, rd_multi) with m.Else(): sync += new_transaction.eq(0) sync += wb_ack.eq(0) - # Only update GPIOs config if a new transaction happened last cy=cle - # (read or write). Always lags from multi csrbus by 1 clk cycle, most - # sane way I could think of while using Record(). + # Delayed from the start of transaction by 1 clk cycle with m.If(new_transaction): + # Update the GPIO configs with sent parameters with m.If(bus.we): - self.connect_wr_bus_to_gpio(m, sync, bus.adr, gpio_ports, multi) - sync += wb_ack.eq(0) + self.connect_wr_bus_to_gpio(m, sync, bus.adr, gpio_ports, + wr_multi) + sync += wb_ack.eq(0) # stop ack'ing! + # Copy the GPIO config data in read multi bus to the WB data bus + # Ack as we're done with m.Else(): multi_cat = [] for i in range(0, self.wordsize): @@ -133,7 +127,6 @@ class SimpleGPIO(Elaboratable): sync += wb_rd_data.eq(Cat(multi_cat)) sync += wb_ack.eq(1) # Delay ack until rd data is ready! - return m def connect_wr_bus_to_gpio(self, module, domain, addr, gp, multi): @@ -166,9 +159,11 @@ class SimpleGPIO(Elaboratable): if self.n_gpio % self.wordsize == 0: for byte in range(self.wordsize): with module.If(addr[0]): - self.rd_connect_one_byte(module, domain, gp, multi, byte, self.wordsize) + self.rd_connect_one_byte(module, domain, gp, multi, + byte, self.wordsize) with module.Else(): - self.rd_connect_one_byte(module, domain, gp, multi, byte, 0) + self.rd_connect_one_byte(module, domain, gp, multi, + byte, 0) else: # TODO: This is a complex case, not needed atm print("#GPIOs is greater than WB wordsize") @@ -179,6 +174,8 @@ class SimpleGPIO(Elaboratable): for byte in range(self.n_gpio): self.rd_connect_one_byte(module, domain, gp, multi, byte, 0) + # Pass a single GPIO config to one byte of the read multi bus + # Offset parameter allows to connect multiple GPIO rows to same multi bus. def rd_connect_one_byte(self, module, domain, gp, multi, byte, offset): domain += multi[byte].oe.eq(gp[byte+offset].oe) domain += multi[byte].puen.eq(gp[byte+offset].puen) @@ -192,6 +189,7 @@ class SimpleGPIO(Elaboratable): domain += multi[byte].bank.eq(gp[byte+offset].bank) + # Pass a single CSR byte from write multi bus to one GPIO def wr_connect_one_byte(self, module, domain, gp, multi, byte, offset): domain += gp[byte+offset].oe.eq(multi[byte].oe) domain += gp[byte+offset].puen.eq(multi[byte].puen) @@ -201,7 +199,7 @@ class SimpleGPIO(Elaboratable): with module.If(multi[byte].oe): domain += gp[byte+offset].o.eq(multi[byte].io) with module.Else(): - domain += gp[byte+offset].o.eq(0) + domain += gp[byte+offset].o.eq(0) # Clear GPIO o by default domain += gp[byte+offset].bank.eq(multi[byte].bank) @@ -554,9 +552,9 @@ def gen_gtkw_doc(n_gpios, wordsize, filename): single_word.append(word_signals) traces.append(tuple(single_word)) - traces.append({'comment': 'Multi-byte GPIO config bus'}) + traces.append({'comment': 'Multi-byte GPIO config write bus'}) for word in range(0, wordsize): - prefix = "word{}__".format(word) + prefix = "wr_word{}__".format(word) single_word = [] word_signals = [] single_word.append('Word{}'.format(word))