From: David Lechner Date: Thu, 27 Dec 2018 19:53:05 +0000 (-0600) Subject: configs/lego_ev3: update to Linux kernel 4.19 and U-Boot 2018.11 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=f816a35b18c810ba2fb8dad584e431e65a168ada;p=buildroot.git configs/lego_ev3: update to Linux kernel 4.19 and U-Boot 2018.11 This updates LEGO MINDSTORMS EV3 to Linux kernel 4.19 and U-Boot 2018.11. This kernel brings Bluetooth support, so some Bluez packages are also added. Also, we now have proper device tree support, so a few things are rearranged in the flash and SD card images since the DTB is no longer appended to the kernel image. Signed-off-by: David Lechner Signed-off-by: Thomas Petazzoni --- diff --git a/board/lego/ev3/genimage.cfg b/board/lego/ev3/genimage.cfg index 65d9714650..14880e8f11 100644 --- a/board/lego/ev3/genimage.cfg +++ b/board/lego/ev3/genimage.cfg @@ -18,8 +18,13 @@ image flash.bin { image = "u-boot.bin" size = 256K } + partition dtb { + image = "da850-lego-ev3.dtb" + size = 64K + offset = 0x40000 + } partition uimage { - image = "uImage.da850-lego-ev3" + image = "uImage" size = 4M offset = 0x50000 } @@ -35,7 +40,10 @@ image flash.bin { image boot.vfat { vfat { file uImage { - image = "uImage.da850-lego-ev3" + image = "uImage" + } + file da850-lego-ev3.dtb { + image = "da850-lego-ev3.dtb" } } size = 16M diff --git a/board/lego/ev3/linux.fragment b/board/lego/ev3/linux.fragment index 30dea57b6c..79efd27d37 100644 --- a/board/lego/ev3/linux.fragment +++ b/board/lego/ev3/linux.fragment @@ -1,3 +1,4 @@ +CONFIG_ARM_APPENDED_DTB=n CONFIG_ARCH_DAVINCI_DM644x=n CONFIG_ARCH_DAVINCI_DM355=n CONFIG_ARCH_DAVINCI_DM646x=n @@ -60,3 +61,8 @@ CONFIG_DRM_DUMB_VGA_DAC=n CONFIG_DRM_TINYDRM=y CONFIG_TINYDRM_ST7586=y CONFIG_FB_DA8XX=n +CONFIG_COMMON_CLK_PWM=y +CONFIG_BT=y +CONFIG_BT_HS=n +CONFIG_BT_LE=n +CONFIG_RFKILL=y diff --git a/board/lego/ev3/patches/uboot/configs-legoev3-increase-flash-image-sizes.patch b/board/lego/ev3/patches/uboot/configs-legoev3-increase-flash-image-sizes.patch deleted file mode 100644 index ee0ce61603..0000000000 --- a/board/lego/ev3/patches/uboot/configs-legoev3-increase-flash-image-sizes.patch +++ /dev/null @@ -1,31 +0,0 @@ -From cdd8d11858fa34f6e813fae46b5556e9fb3570dc Mon Sep 17 00:00:00 2001 -From: David Lechner -Date: Sun, 19 Nov 2017 19:54:32 -0600 -Subject: [PATCH] configs: legoev3: increase flash image sizes - -This increases the kernel image to 4M and the rootfs image to 10M. - -It is getting hard to get a kernel image to fit in 3M and the rootfs image -size now matches the filesyssize variable. - -Signed-off-by: David Lechner ---- - include/configs/legoev3.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h -index 79fa3c4..2eeaf85 100644 ---- a/include/configs/legoev3.h -+++ b/include/configs/legoev3.h -@@ -204,7 +204,7 @@ - "mmcargs=setenv bootargs mem=${memsize} console=${console} root=/dev/mmcblk0p2 rw rootwait lpj=747520\0" \ - "mmcboot=bootm ${loadaddr}\0" \ - "flashargs=setenv bootargs mem=${memsize} initrd=${filesysaddr},${filesyssize} root=/dev/ram0 rw rootfstype=squashfs console=${console} lpj=747520\0" \ -- "flashboot=sf probe 0; sf read ${loadaddr} 0x50000 0x300000; sf read ${filesysaddr} 0x350000 0x960000; bootm ${loadaddr}\0" \ -+ "flashboot=sf probe 0; sf read ${loadaddr} 0x50000 0x400000; sf read ${filesysaddr} 0x450000 0xA00000; bootm ${loadaddr}\0" \ - "loadimage=fatload mmc 0 ${loadaddr} uImage\0" \ - "loadbootscr=fatload mmc 0 ${bootscraddr} boot.scr\0" \ - "bootscript=source ${bootscraddr}\0" \ --- -2.7.4 - diff --git a/board/lego/ev3/readme.txt b/board/lego/ev3/readme.txt index 8df91ac111..648bca1e91 100644 --- a/board/lego/ev3/readme.txt +++ b/board/lego/ev3/readme.txt @@ -70,6 +70,13 @@ official Lego Mindstorms EV3 programming software firmware update tool to load the image. To use sdcard.img, use a disk writing tool such as Etcher or dd to write the image to the µSD card. +NOTE: The sdcard.img created by lego_ev3_defconfig won't boot if the official +LEGO firmware is installed on the EV3 (it has an old version of U-Boot that +doesn't know about device tree). You must either set the kernel configuration +option to append the device tree to the kernel or you can create a boot.scr +that chainloads a newer U-Boot or you can install a newer U-Boot in the flash +memory (just flashing u-boot.bin is enough). + Finish ====== @@ -80,3 +87,13 @@ See: - http://botbench.com/blog/2013/08/05/mindsensors-ev3-usb-console-adapter/ The serial port config to use is 115200/8-N-1. + +Bluetooth +========= + +To enable Bluetooth: + + # modprobe hci_uart + # /usr/libexec/bluetooth/bluetoothd & + # bluetoothctl + [bluetooth]# power on diff --git a/configs/lego_ev3_defconfig b/configs/lego_ev3_defconfig index 0281924133..cf2809059e 100644 --- a/configs/lego_ev3_defconfig +++ b/configs/lego_ev3_defconfig @@ -2,28 +2,33 @@ BR2_arm=y BR2_arm926t=y -# Build options -BR2_GLOBAL_PATCH_DIR="board/lego/ev3/patches" +# Toolchain +BR2_TOOLCHAIN_BUILDROOT_WCHAR=y # system BR2_TARGET_GENERIC_GETTY=y BR2_TARGET_GENERIC_GETTY_PORT="ttyS1" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/lego/ev3/post-image.sh" -# Linux headers same as kernel, a 4.14 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y +# Linux headers same as kernel, a 4.19 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.19" BR2_LINUX_KERNEL_DEFCONFIG="davinci_all" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/lego/ev3/linux.fragment" +BR2_LINUX_KERNEL_UIMAGE=y BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0xc0008000" -BR2_LINUX_KERNEL_APPENDED_UIMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="da850-lego-ev3" # Target packages BR2_PACKAGE_BUSYBOX_CONFIG_FRAGMENT_FILES="board/lego/ev3/busybox.fragment" +BR2_PACKAGE_BLUEZ5_UTILS=y +BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y +BR2_PACKAGE_LINUX_FIRMWARE=y +BR2_PACKAGE_LINUX_FIRMWARE_TI_CC2560=y # filesystem BR2_TARGET_ROOTFS_EXT2=y @@ -36,7 +41,7 @@ BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2018.11" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="legoev3" # host