From: J.T. Conklin Date: Wed, 15 Mar 1995 22:00:30 +0000 (+0000) Subject: * nlmstub.def: Removed, this was moved to nlm/gdbserve.def X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=f919f30267396cc5fc3da2ebd164c422b063e77a;p=binutils-gdb.git * nlmstub.def: Removed, this was moved to nlm/gdbserve.def long ago. * config/alpha/{alpha-nw.mt, gdbserve.mt, tm-alphanw.h}: Removed. * nlm/{README-ALPHA-NETWARE, aio.h, alpha-io.S, alpha-regdef.h, alpha.c, alpha.h, altdebug.h}: Removed. --- diff --git a/gdb/config/alpha/alpha-nw.mt b/gdb/config/alpha/alpha-nw.mt deleted file mode 100644 index e87a9c74de5..00000000000 --- a/gdb/config/alpha/alpha-nw.mt +++ /dev/null @@ -1,3 +0,0 @@ -# Target: Little-endian Alpha -TDEPFILES= alpha-tdep.o -TM_FILE= tm-alphanw.h diff --git a/gdb/config/alpha/gdbserve.mt b/gdb/config/alpha/gdbserve.mt deleted file mode 100644 index 71a86043201..00000000000 --- a/gdb/config/alpha/gdbserve.mt +++ /dev/null @@ -1,3 +0,0 @@ -# Target: GDBSERVE.NLM running on a little-endian Alpha -TDEPFILES= alpha.o alpha-io.o -CPU_FILE= alpha diff --git a/gdb/config/alpha/tm-alphanw.h b/gdb/config/alpha/tm-alphanw.h deleted file mode 100644 index 6ee46511d4e..00000000000 --- a/gdb/config/alpha/tm-alphanw.h +++ /dev/null @@ -1,14 +0,0 @@ -/* GDB target definitions for Alpha running Netware. */ - -/* Alpha/Netware uses NT PALcode, which causes call_pal bpt to give the PC of the - actual breakpoint, not PC+4, (like the OSF1 PALcode). */ - -#define DECR_PC_AFTER_BREAK 0 - -#define VM_MIN_ADDRESS ((CORE_ADDR)0) - -#include "alpha/tm-alpha.h" - -/* Stop backtracing when we wander into main. */ - -#define FRAME_CHAIN_VALID_ALTERNATE diff --git a/gdb/nlm/README-ALPHA-NETWARE b/gdb/nlm/README-ALPHA-NETWARE deleted file mode 100644 index b092f710fa8..00000000000 --- a/gdb/nlm/README-ALPHA-NETWARE +++ /dev/null @@ -1,60 +0,0 @@ -This is a preliminary release of GDB and GDBSERVE.NLM for Alpha/Netware. - -Building this release is very straightforward. You just need to do the -following: - - 1) Unpack the release. gunzip < gdb-4.12.3.tar.gz | tar xvf - - should do the trick. - 2) cd gdb-4.12.3 - 3) ./configure --target alpha-netware - 4) make BISON=yacc [You can use either gcc, or the DEC compiler here]. - -Building GDBSERVE.NLM: - - 1) cd gdb-4.12.3/gdb/nlm - 2) Edit Makefile, and change the value to NWAXPDEV to point at the - DEC development kit. - 3) make - -To debug a program, you need to install GDBSERVE.NLM on your server in -[SYSTEM] (or, anywhere in your search path). Then, connect your netware -server to the host with a null modem cable. Start up the app you want to -debug by doing `gdbserve 0 0 APPNAME APP-ARGS ...'. At this point, the -server will be stopped inside of GDBSERVE, waiting for debugger commands -from the serial line. Now, you run GDB on a copy of the app .o file, -and do a target command to connect to the server. `gdb foo.o', then -(gdb) target remote /dev/tty00. Note that foo.o should not be the NLM. -It should be the file that is input to alphanlm or nlmconv. - -At this point, GDB should be paused at the first instruction of the program -(that's probably _Prelude). You can put a breakpoint at main, and then do -a continue command to debug your program. At that point, normal step/next -commands, backtrace, etc should work. - -Known problems: - -Sometimes you will see messages like the following: - warning: Hit heuristic-fence-post without finding - warning: enclosing function for address 0x1112f1f0 -These can be ignored. They are usually associated with stepping over -external functions (like printf). - -Function calling (ie: print foo(42)) is very slow. A fix for this is in -the works. - -Due to last minute problems with GAS, I was not able to build GDBSERVE.NLM -with our tools, and I was unable to test code compiled with our tools. This -should not be a problem, as GDB will quite happily debug programs compiled -with either GCC, or the DEC tools. For the time being, GDBSERVE will be -compiled with the DEC tools. - -We can't build prelude.o because the DEC dev kit didn't supply libhooks.h. -For the time being, I have just copied prelude.o from the DEC dev kit into -the GDB kit. - -In case of problems: - -If GDB hangs when talking to the target, try turning on remote debugging -(you can use ^C to wake up GDB if necessary). To do this, just type -`set remotedebug 1'. This will print out the protocol packets whenever -GDB and GDBSERVE talk to each other. diff --git a/gdb/nlm/aio.h b/gdb/nlm/aio.h deleted file mode 100644 index 7b007db798c..00000000000 --- a/gdb/nlm/aio.h +++ /dev/null @@ -1,639 +0,0 @@ -#ifndef _AIO_H_ -#define _AIO_H_ - -/*----------------------------------------------------------------------------* - * * - * NetWare 386 Developer's Asynchronous I/O (AIO) Runtime library * - * * - * This include file defines the constants and prototypes required * - * to use the AIO application interface. * - * * - * (c) Copyright. 1991 Novell, Inc. All rights reserved. * - * * - *----------------------------------------------------------------------------*/ - -typedef unsigned long DWORD; - - -/*----------------------------------------------------------------------------* - * * - * Predefined hardware types for use with the AIOAcquirePort function. * - * * - *----------------------------------------------------------------------------*/ - -#define AIO_COMX_TYPE (1) -#define AIO_ARTIC_TYPE (2) -#define AIO_WNIM_TYPE (3) - - -/*----------------------------------------------------------------------------* - * * - * Function completion code status values. * - * * - * Note that all error statuses are negative values. * - * * - *----------------------------------------------------------------------------*/ - -#define AIO_SUCCESS (0) -#define AIO_BAD_HANDLE (-1) -#define AIO_FAILURE (-2) -#define AIO_FUNC_NOT_SUPPORTED (-3) -#define AIO_INVALID_PARAMETER (-5) -#define AIO_PORT_NOT_AVAILABLE (-6) -#define AIO_QUALIFIED_SUCCESS (-7) -#define AIO_NO_MORE_PORTS (-8) -#define AIO_TYPE_NUMBER_INVALID (-10) -#define AIO_BOARD_NUMBER_INVALID (-11) -#define AIO_PORT_NUMBER_INVALID (-12) -#define AIO_RESOURCE_TAG_INVALID (-13) -#define AIO_DATA_PRESENT (-14) -#define AIO_BAD_REQUEST_TYPE (-15) -#define AIO_PORT_GONE (-20) -#define AIO_RTAG_INVALID (-21) - - -/* This is only for non-CLIB application */ - -#define ASYNCIOSignature 0x4E595341 /* 'NYSA' */ - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with the AIOSetExternalControl function. * - * * - *----------------------------------------------------------------------------*/ - -#define AIO_EXTERNAL_CONTROL (1) -#define AIO_EXTCTRL_DTR (1) -#define AIO_EXTCTRL_RTS (2) - - -#define AIO_BREAK_CONTROL (2) -#define AIO_SET_BREAK_OFF (0) -#define AIO_SET_BREAK_ON (1) - - -#define AIO_FLOW_CONTROL (3) -#define AIO_SOFTWARE_FLOW_CONTROL_OFF (0) -#define AIO_SOFTWARE_FLOW_CONTROL_ON (1) -#define AIO_HARDWARE_FLOW_CONTROL_OFF (0) -#define AIO_HARDWARE_FLOW_CONTROL_ON (2) - - -#define AIO_FLOW_CONTROL_CHARACTERS (4) - -#define AIO_SET_DEADMAN_TIMER (5) - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with the AIOGetExternalStatus function. * - * * - *----------------------------------------------------------------------------*/ - -#define AIO_EXTSTA_RI (0x00000001) -#define AIO_EXTSTA_DCD (0x00000008) -#define AIO_EXTSTA_DSR (0x00000010) -#define AIO_EXTSTA_CTS (0x00000020) -#define AIO_EXTSTA_BREAK (0x00000080) - - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with the AIOFlushBuffers function. * - * * - *----------------------------------------------------------------------------*/ - -#define AIO_FLUSH_WRITE_BUFFER (0x0001) -#define AIO_FLUSH_READ_BUFFER (0x0002) - - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with the AIOReadStatus function. * - * * - *----------------------------------------------------------------------------*/ - -#define AIO_RECEIVE_ACTIVE (0) -#define AIO_RECEIVE_FULL (1) - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with the AIOWriteStatus function. * - * * - *----------------------------------------------------------------------------*/ - -#define AIO_TRANSMIT_IDLE (0) -#define AIO_TRANSMIT_ACTIVE (1) -#define AIO_TRANSMIT_XOFFED (2) - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with the AIOAcquirePort function. * - * * - *----------------------------------------------------------------------------*/ - -#define AIO_HARDWARE_TYPE_WILDCARD (-1) -#define AIO_BOARD_NUMBER_WILDCARD (-1) -#define AIO_PORT_NUMBER_WILDCARD (-1) - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with the AIOConfigurePort function. * - * * - *----------------------------------------------------------------------------*/ - -/* BitRate */ - -#define AIO_BAUD_50 (0) -#define AIO_BAUD_75 (1) -#define AIO_BAUD_110 (2) -#define AIO_BAUD_134p5 (3) -#define AIO_BAUD_150 (4) -#define AIO_BAUD_300 (5) -#define AIO_BAUD_600 (6) -#define AIO_BAUD_1200 (7) -#define AIO_BAUD_1800 (8) -#define AIO_BAUD_2000 (9) -#define AIO_BAUD_2400 (10) -#define AIO_BAUD_3600 (11) -#define AIO_BAUD_4800 (12) -#define AIO_BAUD_7200 (13) -#define AIO_BAUD_9600 (14) -#define AIO_BAUD_19200 (15) -#define AIO_BAUD_38400 (16) -#define AIO_BAUD_57600 (17) -#define AIO_BAUD_115200 (18) - -/* DataBits */ - -#define AIO_DATA_BITS_5 (0) -#define AIO_DATA_BITS_6 (1) -#define AIO_DATA_BITS_7 (2) -#define AIO_DATA_BITS_8 (3) - -/* StopBits */ - -#define AIO_STOP_BITS_1 (0) -#define AIO_STOP_BITS_1p5 (1) -#define AIO_STOP_BITS_2 (2) - -/* Parity */ - -#define AIO_PARITY_NONE (0) -#define AIO_PARITY_ODD (1) -#define AIO_PARITY_EVEN (2) -#define AIO_PARITY_MARK (3) -#define AIO_PARITY_SPACE (4) - -/* FlowControl */ - -#define AIO_SOFTWARE_FLOWCONTROL_OFF (0) -#define AIO_SOFTWARE_FLOWCONTROL_ON (1) -#define AIO_HARDWARE_FLOWCONTROL_OFF (0) -#define AIO_HARDWARE_FLOWCONTROL_ON (2) - -#define AIO_DROPOUT_VALUE (0xFF) - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with AIOPORTCAPABILITIES structure. * - * * - *----------------------------------------------------------------------------*/ - -typedef struct - { - WORD returnLength; /* byte length of capabilities data */ - BYTE majorVersion; - BYTE minorVersion; - LONG notSupportedMask; - BYTE minBitRate; /* minimum bit rate index supported */ - BYTE maxBitRate; /* maximum bit rate index supported */ - BYTE minDataBits; /* minimum data bits per char index supported */ - BYTE maxDataBits; /* maximum data bits per char index supported */ - BYTE minStopBits; /* minimum stop bits per char index supported */ - BYTE maxStopBits; /* maximum stop bits per char index supported */ - BYTE minParityMode; /* minimum parity mode index supported */ - BYTE maxParityMode; /* maximum parity mode index supported */ - BYTE minFlowCtrlMode; /* minimum flow control mode index supported */ - BYTE maxFlowCtrlMode; /* maximum flow control mode index supported */ - LONG miscCapabilities; /* miscellaneous capability flags */ - LONG minReadBufferSize; /* minimum length of receive buffer */ - LONG maxReadBufferSize; /* maximum length of receive buffer */ - LONG minWriteBufferSize; /* minimum length of transmit buffer */ - LONG maxWriteBufferSize; /* maximum length of transmit buffer */ - WORD minDeadmanTime; /* minimum deadman time (seconds) */ - WORD maxDeadmanTime; /* maximum deadman time (seconds) */ - } AIOPORTCAPABILITIES; - -#define AIO_PORT_NS_MINBITRATE (0x80000000) -#define AIO_PORT_NS_MAXBITRATE (0x40000000) -#define AIO_PORT_NS_MINDATABITS (0x20000000) -#define AIO_PORT_NS_MAXDATABITS (0x10000000) -#define AIO_PORT_NS_MINSTOPBITS (0x08000000) -#define AIO_PORT_NS_MAXSTOPBITS (0x04000000) -#define AIO_PORT_NS_MINPARITYMODE (0x02000000) -#define AIO_PORT_NS_MAXPARITYMODE (0x01000000) -#define AIO_PORT_NS_MINFLOWCTRLMODE (0x00800000) -#define AIO_PORT_NS_MAXFLOWCTRLMODE (0x00400000) -#define AIO_PORT_NS_MISCCAPABILITIES (0x00200000) -#define AIO_PORT_NS_MINREADBUFFERSIZE (0x00100000) -#define AIO_PORT_NS_MAXREADBUFFERSIZE (0x00080000) -#define AIO_PORT_NS_MINWRITEBUFFERSIZE (0x00040000) -#define AIO_PORT_NS_MAXWRITEBUFFERSIZE (0x00020000) -#define AIO_PORT_NS_MINDEADMANTIME (0x00010000) -#define AIO_PORT_NS_MAXDEADMANTIME (0x00008000) - -#define AIO_PORT_CAPS_NOT_SUPPORTED (0x00007FFF) -#define AIO_PORT_CAPS_MAJOR_VERSION (1) -#define AIO_PORT_CAPS_MINOR_VERSION (0) - -#define AIO_CAP_OUTPUT_BREAK (0x00000002) -#define AIO_CAP_FLOWCTRLCHARS (0x00000004) -#define AIO_CAP_PROGRAMMABLE (0x00000008) -#define AIO_CAP_INPUT (0x00000010) -#define AIO_CAP_OUTPUT (0x00000020) - - -typedef struct - { - WORD returnLength; /* byte length of driver capabilities structure */ - BYTE byteData[2]; - } AIODVRCAPABILITIES; - -#define AIO_NO_STRUCT_DATA_RETURNED (2) - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with the AIOGetPortsRollCall function. * - * * - *----------------------------------------------------------------------------*/ - -typedef struct - { - WORD returnLength; /* byte length of port info data */ - BYTE majorVersion; - BYTE minorVersion; - LONG notSupportedMask; - int hardwareType; /* value used with AIOAcquirePort */ - int boardNumber; /* " */ - int portNumber; /* " */ - WORD availability; /* availability of port for acquire */ - LONG externalStatus; /* current external status value for port */ - LONG chgdExternalStatus; /* changed external status value for port */ - } AIOPORTINFO; - -#define AIO_INFO_NS_HARDWARETYPE (0x80000000) -#define AIO_INFO_NS_BOARDNUMBER (0x40000000) -#define AIO_INFO_NS_PORTNUMBER (0x20000000) -#define AIO_INFO_NS_AVAILABILITY (0x10000000) -#define AIO_INFO_NS_EXTERNALSTATUS (0x08000000) -#define AIO_INFO_NS_CHGDEXTERNALSTATUS (0x04000000) - -#define AIO_PORT_INFO_NOT_SUPPORTED (0x03FFFFFF) -#define AIO_PORT_INFO_MAJOR_VERSION (1) -#define AIO_PORT_INFO_MINOR_VERSION (0) - -#define AIO_AVAILABLE_FOR_ACQUIRE (0) -#define AIO_ALREADY_ACQUIRED (1) -#define AIO_UNAVAILABLE (0xFF) - -#define AIO_INITIAL (0) -#define AIO_SUCCESSOR (1) - - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with the AIOGetPortConfiguration function. * - * * - *----------------------------------------------------------------------------*/ - -typedef struct - { - WORD returnLength; /* byte length of port configuration data */ - BYTE majorVersion; - BYTE minorVersion; - LONG notSupportedMask; - int hardwareType; /* value used with AIOAcquirePort */ - int boardNumber; /* " */ - int portNumber; /* " */ - BYTE bitRate; /* Bits per second index */ - BYTE dataBits; /* Bits per character index */ - BYTE stopBits; /* Stop bits per char index */ - BYTE parityMode; /* Generated parity index */ - BYTE flowCtrlMode; /* Flow control mode */ - BYTE breakMode; /* Break control mode */ - LONG readSize; /* Receive buffer size */ - LONG writeSize; /* Transmit buffer size */ - BYTE transmitXon; - BYTE transmitXoff; - BYTE receiveXon; - BYTE receiveXoff; - WORD externalControl; /* set with AIO_EXTERNAL_CONTROL */ - - } AIOPORTCONFIG; - -#define AIO_CONFIG_NS_HARDWARETYPE (0x80000000) -#define AIO_CONFIG_NS_BOARDNUMBER (0x40000000) -#define AIO_CONFIG_NS_PORTNUMBER (0x20000000) -#define AIO_CONFIG_NS_BITRATE (0x10000000) -#define AIO_CONFIG_NS_DATABITS (0x08000000) -#define AIO_CONFIG_NS_STOPBITS (0x04000000) -#define AIO_CONFIG_NS_PARITYMODE (0x02000000) -#define AIO_CONFIG_NS_FLOWCTRLMODE (0x01000000) -#define AIO_CONFIG_NS_BREAKMODE (0x00800000) -#define AIO_CONFIG_NS_READSIZE (0x00400000) -#define AIO_CONFIG_NS_WRITESIZE (0x00200000) -#define AIO_CONFIG_NS_TRANSMITXON (0x00100000) -#define AIO_CONFIG_NS_TRANSMITXOFF (0x00080000) -#define AIO_CONFIG_NS_RECEIVEXON (0x00040000) -#define AIO_CONFIG_NS_RECEIVEXOFF (0x00020000) -#define AIO_CONFIG_NS_EXTERNALCONTROL (0x00010000) - -#define AIO_PORT_CONFIG_NOT_SUPPORTED (0x0007FFFF) -#define AIO_PORT_CONFIG_MAJOR_VERSION (1) -#define AIO_PORT_CONFIG_MINOR_VERSION (0) - -#define AIO_EXTCTRL_DTR_ENABLE (1) -#define AIO_EXTCTRL_DTR_DISABLE (0) -#define AIO_EXTCTRL_RTS_ENABLE (2) -#define AIO_EXTCTRL_RTS_DISABLE (0) - -#define AIO_BREAK_MODE_OFF (0) -#define AIO_BREAK_MODE_ON (1) - -typedef struct - { - WORD returnLength; /* byte length of driver config structure */ - BYTE byteData[2]; - } AIODVRCONFIG; - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with the AIOGetStatistics function. * - * * - *----------------------------------------------------------------------------*/ - -typedef struct - { - WORD returnLength; /* byte length of port statistics structure */ - BYTE majorVersion; - BYTE minorVersion; - LONG notSupportedMask; - LONG receiveBytes; /* total number of bytes received on port */ - LONG transmitBytes; /* total number of bytes transmitted from port */ - LONG parityErrors; /* number of receive parity errors */ - LONG framingErrors; /* number of receive framing errors */ - LONG overrunSoftware; /* number of software overruns (occurrences) */ - LONG overrunHardware; /* number of hardware overruns (occurrences) */ - } AIOPORTSTATISTICS; - -#define AIO_STATS_NS_RECEIVEBYTES (0x80000000) -#define AIO_STATS_NS_TRANSMITBYTES (0x40000000) -#define AIO_STATS_NS_PARITYERRORS (0x20000000) -#define AIO_STATS_NS_FRAMINGERRORS (0x10000000) -#define AIO_STATS_NS_OVERRUNSOFTWARE (0x08000000) -#define AIO_STATS_NS_OVERRUNHARDWARE (0x04000000) - -#define AIO_PORT_STATS_NOT_SUPPORTED (0x03FFFFFF) -#define AIO_PORT_STATS_MAJOR_VERSION (1) -#define AIO_PORT_STATS_MINOR_VERSION (0) - -typedef struct - { - WORD returnLength; /* byte length of driver statistics structure */ - BYTE byteData[2]; - } AIODVRSTATISTICS; - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with AIOGetDriverList function. * - * * - *----------------------------------------------------------------------------*/ - -typedef struct - { - int hardwareType; - int ports; - char name[128]; - } AIODRIVERLISTENTRY; - -typedef struct - { - WORD returnLength; - AIODRIVERLISTENTRY driver[1]; - } AIODRIVERLIST; - -#define AIO_DRIVER_LIST_GET_FIRST (-1) - - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with AIOGetBoardList function. * - * * - *----------------------------------------------------------------------------*/ - -typedef struct - { - int boardNumber; - int ports; - char name[128]; - } AIOBOARDLISTENTRY; - -typedef struct - { - WORD returnLength; - AIOBOARDLISTENTRY board[1]; - } AIOBOARDLIST; - -#define AIO_BOARD_LIST_GET_FIRST (-1) - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with AIOSetControlData function. * - * * - *----------------------------------------------------------------------------*/ - -typedef struct - { - WORD returnLength; /* byte length of control data structure */ - BYTE byteData[2]; - } AIOCONTROLDATA; - -/*----------------------------------------------------------------------------* - * * - * Definitions for use with AIOGetFirstPortInfo and AIOGetNextPortInfo * - * * - *----------------------------------------------------------------------------*/ - -typedef struct - { - int typeMask; - int boardMask; - int portMask; - int reserved[6]; - } AIOPORTSEARCH; - - /* reserved index values */ - -#define SEARCH_TYPE_INDEX 0 -#define SEARCH_BOARD_INDEX 1 -#define SEARCH_PORT_INDEX 2 - - -/*----------------------------------------------------------------------------* - * * - * Definition of AIO functions. * - * * - *----------------------------------------------------------------------------*/ - -extern int AIOAcquirePort ( int *hardwareType, - int *boardNumber, - int *portNumber, - int *portHandle - ); - -extern int AIOAcquirePortWithRTag ( int *hardwareType, - int *boardNumber, - int *portNumber, - int *portHandle, - LONG RTag - ); - -extern int AIOConfigurePort ( int portHandle, - BYTE bitRate, - BYTE dataBits, - BYTE stopBits, - BYTE parityMode, - BYTE flowCtrlMode - ); - -extern int AIOFlushBuffers ( int portHandle, - WORD flushFlag - ); - -extern int AIOGetBoardList( int hardwareType, - int boardIndex, - AIOBOARDLIST *pBoardList ); - -extern int AIOGetDriverList ( int lastHardwareType, - AIODRIVERLIST *pDriverList - ); - -extern int AIOGetExternalStatus ( int portHandle, - LONG *extStatus, - LONG *chgdExtStatus - ); - -extern int AIOGetFirstPortInfo ( int hardwareType, - int boardNumber, - int portNumber, - AIOPORTSEARCH *portSearchP, - AIOPORTINFO *portInfoP, - AIOPORTCAPABILITIES *capabilitiesP, - AIODVRCAPABILITIES *dvrCapabilitiesP, - char *NLMModuleNameP ); - -extern int AIOGetNextPortInfo ( AIOPORTSEARCH *portSearchP, - AIOPORTINFO *portInfoP, - AIOPORTCAPABILITIES *capabilitiesP, - AIODVRCAPABILITIES *dvrCapabilitiesP, - char *NLMModuleNameP ); - -extern int AIOGetPortCapability ( int portHandle, - AIOPORTCAPABILITIES *pCapabilities, - AIODVRCAPABILITIES *pDvrCapabilities - ); - -extern int AIOGetPortConfiguration ( int portHandle, - AIOPORTCONFIG *pPortConfig, - AIODVRCONFIG *pDvrConfig - ); - -extern int AIOGetPortStatus ( int portHandle, - LONG *writeCount, - WORD *writeState, - LONG *readCount, - WORD *readState, - LONG *extStatus, - LONG *chgdExtStatus - ); - -extern int AIOGetReadBufferSize ( int portHandle, - LONG *readSize - ); - -extern int AIOGetPortStatistics ( int portHandle, - AIOPORTSTATISTICS *pPortStatistics, - AIODVRSTATISTICS *pDvrStatistics - ); - -extern int AIOGetFirstPortStatistics( int hardwareType, - int boardNumber, - int portNumber, - AIOPORTSEARCH *portSearchP, - AIOPORTSTATISTICS *pPortStatistics, - AIODVRSTATISTICS *pDvrStatistics - ); - -extern int AIOGetNextPortStatistics ( AIOPORTSEARCH *portSearchP, - AIOPORTSTATISTICS *pPortStatistics, - AIODVRSTATISTICS *pDvrStatistics - ); - -extern int AIOGetWriteBufferSize ( int portHandle, - LONG *writeSize - ); - -extern int AIOReadData ( int portHandle, - char *buffer, - LONG length, - LONG *numberBytesRead - ); - -extern int AIOReadStatus ( int portHandle, - LONG *count, - WORD *state - ); - -extern int AIOReleasePort ( int portHandle ); - -extern int AIOSetControlData ( int portHandle, - int requestType, - AIOCONTROLDATA *requestStructValue - ); - -extern int AIOSetExternalControl ( int portHandle, - int requestType, - int requestValue - ); - -extern int AIOSetFlowControl ( int portHandle, - int flowCtrlMode - ); - -extern int AIOSetFlowControlCharacters( int portHandle, - BYTE transmitXon, - BYTE transmitXoff, - BYTE receiveXon, - BYTE receiveXoff - ); - -extern int AIOSetReadBufferSize ( int portHandle, - LONG bufferSize - ); - -extern int AIOSetWriteBufferSize ( int portHandle, - LONG bufferSize - ); - -extern int AIOWriteData ( int portHandle, - char *buffer, - LONG length, - LONG *numberBytesWritten - ); - -extern int AIOWriteStatus ( int portHandle, - LONG *count, - WORD *state - ); - -#endif /* _AIO_H_ */ diff --git a/gdb/nlm/alpha-io.S b/gdb/nlm/alpha-io.S deleted file mode 100644 index f3c2bc72a6d..00000000000 --- a/gdb/nlm/alpha-io.S +++ /dev/null @@ -1,150 +0,0 @@ -/* - * Copyright (C) 1993, 1994 by - * Digital Equipment Corporation, Maynard, Massachusetts. - * All rights reserved. - * - * This software is furnished under a license and may be used and copied - * only in accordance of the terms of such license and with the - * inclusion of the above copyright notice. This software or any other - * copies thereof may not be provided or otherwise made available to any - * other person. No title to and ownership of the software is hereby - * transferred. - * - * The information in this software is subject to change without notice - * and should not be construed as a commitment by Digital Equipment - * Corporation. - * - * Digital assumes no responsibility for the use or reliability of its - * software on equipment which is not supplied by Digital. - * - */ - - -#include "alpha-regdef.h" - -#define LEAF_ENTRY(NAME) .text ; .align 4 ; .globl NAME ; .ent NAME, 0 ; NAME: ; .frame sp, 0, ra ; .prologue 0 ; - - -LEAF_ENTRY(flush_i_cache) - call_pal 0x86 /* IMB */ - ret zero, (ra) /* return */ - .end flush_i_cache - - - -/* ++ - * - * VOID - * outVti( - * ULONG Port - * ULONG Data - * ) - * - * Routine Description: - * - * This Function Uses The 64-Bit Super-Page To Write Data To A Port - * Of The On-Board VTI Combo Chip For JENSEN. - * - * Arguments: - * - * Port (A0) - Port Number On VTI Chip To Which To Write Data - * data (a1) - data to write to the port, only low byte is significant - * To The VTI - * - * Return Value: - * - * None. - * - */ - - LEAF_ENTRY(outVti) - - /* - * generate super-page address of vti, base address - * N.B. - Upper Bits Must Be Sign Extension Of Bit 42 - * va<42:41> = 10 (binary) for super-page address - */ - - lda t0, 0xc01c(zero) /* t0 = ffff ffff ffff c01c */ - sll t0, 28, t0 /* t0 = ffff fc01 c000 0000 */ - - - /* - * Shift In The Port Number To Generate The Port Address We - * wish to access - * N.B. - Access Width Is Always Zero = Byte Access For VTI - */ - - sll a0, 9, a0 /* a0 << 9 */ - bis t0, a0, t0 /* T0 = Address Of VTI Port */ - - - /* - * Do The Port Write, Guarantee That Subsequent Writes (And Reads) - * are ordered with respect to this write and return to caller - */ - - stl a1, 0(t0) /* write data to port */ - mb /* guarantee write ordering */ - - ret zero, (ra) /* return */ - - .end outVti - - - -/* - * - * ULONG - * inVti( - * ULONG Port - * ) - * - * Routine Description: - * - * This Function Uses The 64-Bit Super-Page To Read Data From A Port - * Of The On-Board VTI Combo Chip For JENSEN. - * - * Arguments: - * - * Port (A0) - Port Number On VTI Chip To Which To Write Data - * - * Return Value: - * - * Data (V0) - The Data Read From The VTI Chip, Only The Low Byte Will - * be valid - * - */ - - LEAF_ENTRY(inVti) - - /* - * generate super-page address of vti, base address - * N.B. - Upper Bits Must Be Sign Extension Of Bit 42 - * va<42:41> = 10 (binary) for super-page address - */ - - lda t0, 0xc01c(zero) /* t0 = ffff ffff ffff c01c */ - sll t0, 28, t0 /* t0 = ffff fc01 c000 0000 */ - - - /* - * Shift In The Port Number To Generate The Port Address We - * wish to access - * N.B. - Access Width For VTI Is Always 0 = Byte Access - */ - - sll a0, 9, a0 /* a0 << 9 */ - bis t0, a0, t0 /* T0 = Address Of VTI Port */ - - - /* - * Do The Super-Page I/O Access And Return Data To Caller - */ - - ldl v0, 0(t0) /* read data from port */ - and v0, 0xff, v0 - - ret zero, (ra) /* return */ - - .end inVti diff --git a/gdb/nlm/alpha-regdef.h b/gdb/nlm/alpha-regdef.h deleted file mode 100644 index 4bd673ccd96..00000000000 --- a/gdb/nlm/alpha-regdef.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * ***************************************************************** - * * * - * * Copyright (c) Digital Equipment Corporation, 1991, 1992 * - * * * - * * All Rights Reserved. Unpublished rights reserved under * - * * the copyright laws of the United States. * - * * * - * * The software contained on this media is proprietary to * - * * and embodies the confidential technology of Digital * - * * Equipment Corporation. Possession, use, duplication or * - * * dissemination of the software and media is authorized only * - * * pursuant to a valid written license from Digital Equipment * - * * Corporation. * - * * * - * * RESTRICTED RIGHTS LEGEND Use, duplication, or disclosure * - * * by the U.S. Government is subject to restrictions as set * - * * forth in Subparagraph (c)(1)(ii) of DFARS 252.227-7013, * - * * or in FAR 52.227-19, as applicable. * - * * * - * ***************************************************************** - */ -/* - * HISTORY - */ -/* - * Modification History: /sys/machine/alpha/regdef.h - * - * 01-Oct-90 -- rjl - * Defined the k0 and k1 registers. They are not really used as such - * but they have to be defined in order for them to be saved during - * exception handling - * - * 06-Sep-90 -- kjl and afd - * Created this file for Alpha support. - */ - -#define v0 $0 - -#define t0 $1 -#define t1 $2 -#define t2 $3 -#define t3 $4 -#define t4 $5 -#define t5 $6 -#define t6 $7 -#define t7 $8 - -#define s0 $9 -#define s1 $10 -#define s2 $11 -#define s3 $12 -#define s4 $13 -#define s5 $14 -#define s6 $15 -#define fp $15 /* fp & s6 are the same */ - -#define a0 $16 -#define a1 $17 -#define a2 $18 -#define a3 $19 -#define a4 $20 -#define a5 $21 - -#define t8 $22 -#define t9 $23 -#define t10 $24 -#define t11 $25 - -#define ra $26 - -#define pv $27 /* pv and t5 are the same */ -#define t12 $27 - -#define AT $at - -#define gp $29 - -#define sp $30 -#define zero $31 diff --git a/gdb/nlm/alpha.c b/gdb/nlm/alpha.c deleted file mode 100644 index 461d16bd84c..00000000000 --- a/gdb/nlm/alpha.c +++ /dev/null @@ -1,325 +0,0 @@ -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include "alpha.h" - -extern char *mem2hex (void *mem, char *buf, int count, int may_fault); -extern char *hex2mem (char *buf, void *mem, int count, int may_fault); -extern int computeSignal (int exceptionVector); - -/* Get the registers out of the frame information. */ - -void -frame_to_registers (frame, regs) - struct StackFrame *frame; - char *regs; -{ - mem2hex (&frame->ExceptionPC, ®s[PC_REGNUM * 8 * 2], 8 * 1, 0); - - mem2hex (&frame->ExceptionRegs[SF_IREG_OFFSET], ®s[V0_REGNUM * 8 * 2], 8 * 64, 0); -} - -/* Put the registers back into the frame information. */ - -void -registers_to_frame (regs, frame) - char *regs; - struct StackFrame *frame; -{ - hex2mem (®s[PC_REGNUM * 8 * 2], &frame->ExceptionPC, 8 * 1, 0); - - hex2mem (®s[V0_REGNUM * 8 * 2], &frame->ExceptionRegs[SF_IREG_OFFSET], 8 * 64, 0); -} - -union inst -{ - LONG l; - - struct - { - union - { - struct - { - unsigned hint : 16; - unsigned rb : 5; - unsigned ra : 5; - unsigned opcode : 6; - } jump; - struct - { - signed disp : 21; - unsigned ra : 5; - unsigned opcode : 6; - } branch; - } variant; - } inst; -}; - -static LONG saved_inst; -static LONG *saved_inst_pc = 0; -static LONG saved_target_inst; -static LONG *saved_target_inst_pc = 0; - -void -set_step_traps (frame) - struct StackFrame *frame; -{ - union inst inst; - LONG *target; - int opcode; - int ra, rb; - LONG *pc = (LONG *)frame->ExceptionPC; - - inst.l = *pc++; - - opcode = inst.inst.variant.branch.opcode; - - if ((opcode & 0x30) == 0x30) /* A branch of some sort */ - target = inst.inst.variant.branch.disp + pc; - else if (opcode == 0x1a) /* jmp, ret, etc... */ - target = (LONG *)(frame->ExceptionRegs[SF_IREG_OFFSET - + inst.inst.variant.jump.rb].lo - & ~3); - else - target = pc; - - saved_inst = *pc; - *pc = 0x80; /* call_pal bpt */ - saved_inst_pc = pc; - - if (target != pc) - { - saved_target_inst = *target; - *target = 0x80; /* call_pal bpt */ - saved_target_inst_pc = target; - } -} - -/* Remove step breakpoints. Returns non-zero if pc was at a step breakpoint, - zero otherwise. This routine works even if there were no step breakpoints - set. */ - -int -clear_step_traps (frame) - struct StackFrame *frame; -{ - int retcode; - LONG *pc = (LONG *)frame->ExceptionPC; - - if (saved_inst_pc == pc || saved_target_inst_pc == pc) - retcode = 1; - else - retcode = 0; - - if (saved_inst_pc) - { - *saved_inst_pc = saved_inst; - saved_inst_pc = 0; - } - - if (saved_target_inst_pc) - { - *saved_target_inst_pc = saved_target_inst; - saved_target_inst_pc = 0; - } - - return retcode; -} - -void -do_status (ptr, frame) - char *ptr; - struct StackFrame *frame; -{ - int sigval; - - sigval = computeSignal (frame->ExceptionNumber); - - sprintf (ptr, "T%02x", sigval); - ptr += 3; - - sprintf (ptr, "%02x:", PC_REGNUM); - ptr = mem2hex (&frame->ExceptionPC, ptr + 3, 8, 0); - *ptr++ = ';'; - - sprintf (ptr, "%02x:", SP_REGNUM); - ptr = mem2hex (&frame->ExceptionRegs[SF_IREG_OFFSET + SP_REGNUM], ptr + 3, 8, 0); - *ptr++ = ';'; - - sprintf (ptr, "%02x:", RA_REGNUM); - ptr = mem2hex (&frame->ExceptionRegs[SF_IREG_OFFSET + RA_REGNUM], ptr + 3, 8, 0); - *ptr++ = ';'; - - sprintf (ptr, "%02x:", FP_REGNUM); - ptr = mem2hex (&frame->ExceptionRegs[SF_IREG_OFFSET + FP_REGNUM], ptr + 3, 8, 0); - *ptr++ = ';'; - - *ptr = '\000'; -} - -/* This section provides stubs and equivalent interfaces for all functions that - the debugger stub needs, but aren't yet implemented (such as the AIO nlm). */ - -#include -#include -#include -#include - -#define CONST const - -#define com1Rbr 0x3f8 /* Receiver Buffer - Read */ -#define com1Thr 0x3f8 /* Transmitter Holding - Write */ -#define com1Ier 0x3f9 /* Interrupt Enable */ -#define com1Iir 0x3fa /* Interrupt Identification */ -#define com1Lcr 0x3fb /* Line Control */ -#define com1Mcr 0x3fc /* Modem Control */ -#define com1Lsr 0x3fd /* Line Status */ -#define com1Msr 0x3fe /* Modem Status */ -#define com1Scr 0x3ff /* Scratch */ -#define com1Dll 0x3f8 /* Divisor Latch - lsb */ -#define com1Dlm 0x3f9 /* Divisor Latch - msb */ - -#define com2Rbr 0x2f8 /* Receiver Buffer - Read */ -#define com2Thr 0x2f8 /* Transmitter Holding - Write */ -#define com2Ier 0x2f9 /* Interrupt Enable */ -#define com2Iir 0x2fa /* Interrupt Identification */ -#define com2Lcr 0x2fb /* Line Control */ -#define com2Mcr 0x2fc /* Modem Control */ -#define com2Lsr 0x2fd /* Line Status */ -#define com2Msr 0x2fe /* Modem Status */ -#define com2Scr 0x2ff /* Scratch */ -#define com2Dll 0x2f8 /* Divisor Latch - lsb */ -#define com2Dlm 0x2f9 /* Divisor Latch - msb */ - -#define COM1 0x8000 -#define COM2 0x9000 - -static ULONG -uart_getchar (void) -{ - while ((inVti(com1Lsr) & 1) == 0); - - return inVti (com1Rbr); -} - -static void -uart_putchar (char c) -{ - while ((inVti(com1Lsr) & 0x20) == 0); - - outVti (com1Thr,c); -} - -static int -uart_init (int baud) -{ - int i; - int baudconst; - - baudconst = 115200 / baud; - - outVti (com1Lcr, 0x87); - outVti (com1Dlm, 0); - outVti (com1Dll, baudconst); - outVti (com1Lcr, 0x07); - outVti (com1Mcr, 0x0F); - outVti (com1Ier, 0x0); -} - -int -AIOReadData (int portHandle, char *buffer, LONG length, LONG *numberBytesRead) -{ - ULONG c; - - while (1) - { - c = uart_getchar (); - if ((c & ~0377) == COM1) - break; - } - - *buffer = c; - *numberBytesRead = 1; - - return AIO_SUCCESS; -} - -int -AIOWriteData (int portHandle, char *buffer, LONG length, - LONG *numberBytesWritten) - -{ - *numberBytesWritten = length; - - while (length-- > 0) - uart_putchar (*buffer++); - - return AIO_SUCCESS; -} - -int -AIOAcquirePort (int *hardwareType, int *boardNumber, int *portNumber, - int *portHandle) -{ - return AIO_SUCCESS; -} - -int -AIOConfigurePort (int portHandle, BYTE bitRate, BYTE dataBits, BYTE stopBits, - BYTE parityMode, BYTE flowCtrlMode) -{ - uart_init (9600); - - return AIO_SUCCESS; -} - -int -AIOGetPortConfiguration (int portHandle, AIOPORTCONFIG *pPortConfig, - AIODVRCONFIG *pDvrConfig) -{ - fprintf (stderr, "AIOGetPortConfiguration stubbed out\n"); - exit (1); -} - -int -AIOReleasePort (int portHandle) -{ - return AIO_SUCCESS; -} - -int -AIOSetExternalControl (int portHandle, int requestType, int requestValue) -{ - return AIO_SUCCESS; -} - -int -AIOGetExternalStatus (int portHandle, LONG *extStatus, LONG *chgdExtStatus) -{ - fprintf (stderr, "AIOGetExternalStatus stubbed out\n"); - exit (1); -} - -void -StopBell () -{ -} - -int -Breakpoint (int __arg) -{ - fprintf (stderr, "Breakpoint() stubbed out\n"); - exit (1); -} diff --git a/gdb/nlm/alpha.h b/gdb/nlm/alpha.h deleted file mode 100644 index 440faff9543..00000000000 --- a/gdb/nlm/alpha.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Register values. All of these values *MUST* agree with tm.h */ -#define RA_REGNUM 26 /* Contains return address value */ -#define SP_REGNUM 30 /* Contains address of top of stack */ -#define PC_REGNUM 64 /* Contains program counter */ -#define FP_REGNUM 65 /* Virtual frame pointer */ -#define V0_REGNUM 0 /* Function integer return value */ -#define NUM_REGS 66 /* Number of machine registers */ -#define REGISTER_BYTES (NUM_REGS * 8) /* Total size of registers array */ - -#define ExceptionPC ExceptionRegs[SF_REG_PC].lo -#define DECR_PC_AFTER_BREAK 0 /* NT's Palcode gets this right! */ -#define BREAKPOINT {0x80, 0, 0, 0} /* call_pal bpt */ -extern unsigned char breakpoint_insn[]; -#define BREAKPOINT_SIZE 4 - -/*#define flush_i_cache() asm("call_pal 0x86")*/ - -/* Temporary defs until DEC gets their netware includes straightened out */ - -#include "altdebug.h" /* Get StackFrame structure */ - -#define isspace(C) (C == '\n' || C == '\r' || C == ' ' || C == '\t') -int Breakpoint (int __arg); - -typedef unsigned long ULONG; diff --git a/gdb/nlm/altdebug.h b/gdb/nlm/altdebug.h deleted file mode 100644 index c9372ab001b..00000000000 --- a/gdb/nlm/altdebug.h +++ /dev/null @@ -1,105 +0,0 @@ -typedef short int16_t; -typedef unsigned short uint16_t; - -typedef int int32_t; -typedef unsigned int uint32_t; - -typedef struct int64_s { - uint32_t lo; - uint32_t hi; -} int64_t; - -/* Define indexes into register array in StackFrame */ -#define SF_REG_PC 0 - -#define SF_IREG_OFFSET 1 /* int regs start at index 1 */ -#define SF_REG_V0 (0+SF_IREG_OFFSET) -#define SF_REG_T0 (1+SF_IREG_OFFSET) -#define SF_REG_T1 (2+SF_IREG_OFFSET) -#define SF_REG_T2 (3+SF_IREG_OFFSET) -#define SF_REG_T3 (4+SF_IREG_OFFSET) -#define SF_REG_T4 (5+SF_IREG_OFFSET) -#define SF_REG_T5 (6+SF_IREG_OFFSET) -#define SF_REG_T6 (7+SF_IREG_OFFSET) -#define SF_REG_T7 (8+SF_IREG_OFFSET) -#define SF_REG_S0 (9+SF_IREG_OFFSET) -#define SF_REG_S1 (10+SF_IREG_OFFSET) -#define SF_REG_S2 (11+SF_IREG_OFFSET) -#define SF_REG_S3 (12+SF_IREG_OFFSET) -#define SF_REG_S4 (13+SF_IREG_OFFSET) -#define SF_REG_S5 (14+SF_IREG_OFFSET) -#define SF_REG_S6 (15+SF_IREG_OFFSET) -#define SF_REG_FP SF_REG_S6 -#define SF_REG_A0 (16+SF_IREG_OFFSET) -#define SF_REG_A1 (17+SF_IREG_OFFSET) -#define SF_REG_A2 (18+SF_IREG_OFFSET) -#define SF_REG_A3 (19+SF_IREG_OFFSET) -#define SF_REG_A4 (20+SF_IREG_OFFSET) -#define SF_REG_A5 (21+SF_IREG_OFFSET) -#define SF_REG_T8 (22+SF_IREG_OFFSET) -#define SF_REG_T9 (23+SF_IREG_OFFSET) -#define SF_REG_T10 (24+SF_IREG_OFFSET) -#define SF_REG_T11 (25+SF_IREG_OFFSET) -#define SF_REG_RA (26+SF_IREG_OFFSET) -#define SF_REG_PV (27+SF_IREG_OFFSET) -#define SF_REG_T12 SF_REG_PV -#define SF_REG_AT (28+SF_IREG_OFFSET) -#define SF_REG_GP (29+SF_IREG_OFFSET) -#define SF_REG_SP (30+SF_IREG_OFFSET) -#define SF_REG_ZERO (31+SF_IREG_OFFSET) -#define NUMBER_OF_INT_REGS 32 - -#define SF_FREG_OFFSET (SF_IREG_OFFSET+NUMBER_OF_INT_REGS) -#define SF_REG_F0 (0+SF_FREG_OFFSET) -#define SF_REG_F1 (1+SF_FREG_OFFSET) -#define SF_REG_F2 (2+SF_FREG_OFFSET) -#define SF_REG_F3 (3+SF_FREG_OFFSET) -#define SF_REG_F4 (4+SF_FREG_OFFSET) -#define SF_REG_F5 (5+SF_FREG_OFFSET) -#define SF_REG_F6 (6+SF_FREG_OFFSET) -#define SF_REG_F7 (7+SF_FREG_OFFSET) -#define SF_REG_F8 (8+SF_FREG_OFFSET) -#define SF_REG_F9 (9+SF_FREG_OFFSET) -#define SF_REG_F10 (10+SF_FREG_OFFSET) -#define SF_REG_F11 (11+SF_FREG_OFFSET) -#define SF_REG_F12 (12+SF_FREG_OFFSET) -#define SF_REG_F13 (13+SF_FREG_OFFSET) -#define SF_REG_F14 (14+SF_FREG_OFFSET) -#define SF_REG_F15 (15+SF_FREG_OFFSET) -#define SF_REG_F16 (16+SF_FREG_OFFSET) -#define SF_REG_F17 (17+SF_FREG_OFFSET) -#define SF_REG_F18 (18+SF_FREG_OFFSET) -#define SF_REG_F19 (19+SF_FREG_OFFSET) -#define SF_REG_F20 (20+SF_FREG_OFFSET) -#define SF_REG_F21 (21+SF_FREG_OFFSET) -#define SF_REG_F22 (22+SF_FREG_OFFSET) -#define SF_REG_F23 (23+SF_FREG_OFFSET) -#define SF_REG_F24 (24+SF_FREG_OFFSET) -#define SF_REG_F25 (25+SF_FREG_OFFSET) -#define SF_REG_F26 (26+SF_FREG_OFFSET) -#define SF_REG_F27 (27+SF_FREG_OFFSET) -#define SF_REG_F28 (28+SF_FREG_OFFSET) -#define SF_REG_F29 (29+SF_FREG_OFFSET) -#define SF_REG_F30 (30+SF_FREG_OFFSET) -#define SF_REG_FZERO (31+SF_FREG_OFFSET) - -#define NUMBER_OF_FLOAT_REGS 32 - -struct StackFrame -{ - struct DomainStructure *ExceptionDomainID; - struct ProcessorStructure *ExceptionProcessorID; - BYTE *ExceptionDescription; - LONG ExceptionFlags; - LONG ExceptionErrorCode; - LONG ExceptionNumber; - - int64_t ExceptionAddress; /* Address at which exception occured */ - int64_t ExceptionRegs[1+NUMBER_OF_INT_REGS+NUMBER_OF_FLOAT_REGS]; - /* First entry is for PC */ - int ExceptionBrkptNum; /* Set by the NSI debug exception handler - if the exception was caused by a - NID breakpoint */ - int ExceptionBrkptFlags; /* Flags for the breakpoint. See nsibrkpt.c - for details */ -};