From: Richard Henderson Date: Thu, 3 Jun 1999 02:51:53 +0000 (+0000) Subject: * as.c (parse_args): Add option -gdwarf2 to allow requesting X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=fac0d250c7f0efc521ef26519d8ab384a6f60e4d;p=binutils-gdb.git * as.c (parse_args): Add option -gdwarf2 to allow requesting DWARF2 debug info (line information only, at this point). * as.h: Update comment about supported debug formats. * dwarf2dbg.c, dwarf2dbg.h: New files. * Makefile.am (GAS_CFILES, HFILES, GENERIC_OBJS): Add them. --- diff --git a/gas/ChangeLog b/gas/ChangeLog index 4cf898aa3dd..53bf5197598 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,37 @@ +1999-06-03 David Mosberger + + * dwarf2dbg.c (INITIAL_STATE): New macro encapsulating initial + state of line state-machine. + (struct ls): Collect DWARF2 line state-machine state in new member + SM. Add member EMPTY_SEQUENCE to keep track if a code sequence + resulted in any DWARF2 directives. + (reset_state_machine): New function. + (out_end_sequence): Ditto. + (dwarf2_gen_line_info): When switching sections or switching to a + lower text address, call out_end_sequence() first to terminate the + previous code sequence as code sequences MUST have monotonically + increasing addresses. + (dwarf2_finish): Call out_end_sequence() instead of open coding it. + +1999-06-03 David Mosberger + + * as.c (parse_args): Add option -gdwarf2 to allow requesting + DWARF2 debug info (line information only, at this point). + * as.h: Update comment about supported debug formats. + * dwarf2dbg.c, dwarf2dbg.h: New files. + * Makefile.am (GAS_CFILES, HFILES, GENERIC_OBJS): Add them. + + * expr.c (operand): Don't use [ for parens if we want an index op. + (op_encoding): Switch [ into O_index, if desired. + (op_rank): Renumber with O_index on bottom. + (expr): If O_index, match closing bracket. + * expr.h (O_index): New. + + * read.c (read_a_source_file): Conditionally allow matched " + in lines passed to md_assemble. + + * config/obj-elf.c (elf_pseudo_table): Add `common'. + 1999-06-03 Ian Lance Taylor Add support for storing local symbols in a small structure to save diff --git a/gas/Makefile.am b/gas/Makefile.am index b1fc38f610a..d89726da678 100644 --- a/gas/Makefile.am +++ b/gas/Makefile.am @@ -134,6 +134,7 @@ GAS_CFILES = \ bignum-copy.c \ cond.c \ depend.c \ + dwarf2dbg.c \ ecoff.c \ ehopt.c \ expr.c \ @@ -164,6 +165,7 @@ HFILES = \ bignum.h \ bit_fix.h \ cgen.h \ + dwarf2dbg.h \ ecoff.h \ emul-target.h \ emul.h \ @@ -331,6 +333,7 @@ GENERIC_OBJS = \ bignum-copy.o \ cond.o \ depend.o \ + dwarf2dbg.o \ ehopt.o \ expr.o \ flonum-konst.o \ @@ -879,6 +882,7 @@ atof-generic.o: atof-generic.c bignum-copy.o: bignum-copy.c cond.o: cond.c macro.h sb.h $(INCDIR)/obstack.h depend.o: depend.c +dwarf2dbg.o: dwarf2dbg.c dwarf2dbg.h subsegs.h ecoff.o: ecoff.c ehopt.o: ehopt.c subsegs.h $(INCDIR)/obstack.h $(INCDIR)/elf/dwarf2.h expr.o: expr.c $(INCDIR)/obstack.h diff --git a/gas/as.c b/gas/as.c index 0cdd357dc7d..8bb0b8cf173 100644 --- a/gas/as.c +++ b/gas/as.c @@ -143,6 +143,7 @@ Options:\n\ m include macro expansions\n\ n omit forms processing\n\ s include symbols\n\ + L include line debug statistics (if applicable)\n\ =file set listing file name (must be last sub-option)\n")); fprintf (stream, _("\ @@ -365,7 +366,9 @@ parse_args (pargc, pargv) #define OPTION_STRIP_LOCAL_ABSOLUTE (OPTION_STD_BASE + 15) {"strip-local-absolute", no_argument, NULL, OPTION_STRIP_LOCAL_ABSOLUTE}, #define OPTION_TRADITIONAL_FORMAT (OPTION_STD_BASE + 16) - {"traditional-format", no_argument, NULL, OPTION_TRADITIONAL_FORMAT} + {"traditional-format", no_argument, NULL, OPTION_TRADITIONAL_FORMAT}, +#define OPTION_GDWARF2 (OPTION_STD_BASE + 17) + {"gdwarf2", no_argument, NULL, OPTION_GDWARF2} }; /* Construct the option lists from the standard list and the @@ -546,6 +549,10 @@ the GNU General Public License. This program has absolutely no warranty.\n")); debug_type = DEBUG_STABS; break; + case OPTION_GDWARF2: + debug_type = DEBUG_DWARF2; + break; + case 'J': flag_signed_overflow_ok = 1; break; diff --git a/gas/as.h b/gas/as.h index 65d3bad1c91..4be36cc163f 100644 --- a/gas/as.h +++ b/gas/as.h @@ -457,7 +457,7 @@ COMMON int linkrelax; extern int listing; /* Type of debugging information we should generate. We currently - only support stabs and ECOFF. */ + support stabs, ECOFF, and DWARF2. */ enum debug_info_type { diff --git a/gas/dwarf2dbg.c b/gas/dwarf2dbg.c new file mode 100644 index 00000000000..75b6d5ca760 --- /dev/null +++ b/gas/dwarf2dbg.c @@ -0,0 +1,672 @@ +/* dwarf2dbg.c - DWARF2 debug support + Copyright (C) 1999 Hewlett-Packard Co + Contributed by David Mosberger-Tang + + This file is part of GAS, the GNU Assembler. + + GAS is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + GAS is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GAS; see the file COPYING. If not, write to the Free + Software Foundation, 59 Temple Place - Suite 330, Boston, MA + 02111-1307, USA. + + Logical line numbers can be controlled by the compiler via the + following two directives: + + .file FILENO "file.c" + .loc FILENO LINENO [COLUMN] + + FILENO is the filenumber. */ + +#include "ansidecl.h" + +#include "as.h" +#include "dwarf2dbg.h" +#include "subsegs.h" + +#include + +#define BYTES_PER_ADDRESS (BFD_ARCH_SIZE / 8) + +/* Since we can't generate the prolog until the body is complete, we + use three different subsegments for .debug_line: one holding the + prolog, one for the directory and filename info, and one for the + body ("statement program"). */ +#define DL_PROLOG 0 +#define DL_FILES 1 +#define DL_BODY 2 + +/* First special line opcde - leave room for the standard opcodes. + Note: If you want to change this, you'll have to update the + "standard_opcode_lengths" table that is emitted below in + dwarf2_finish(). */ +#define DWARF2_LINE_OPCODE_BASE 10 + +#ifndef DWARF2_LINE_BASE + /* Minimum line offset in a special line info. opcode. This value + was chosen to give a reasonable range of values. */ +# define DWARF2_LINE_BASE -5 +#endif + +/* Range of line offsets in a special line info. opcode. */ +#ifndef DWARF2_LINE_RANGE +# define DWARF2_LINE_RANGE 14 +#endif + +#ifndef DWARF2_LINE_MIN_INSN_LENGTH + /* Define the architecture-dependent minimum instruction length (in + bytes). This value should be rather too small than too big. */ +# define DWARF2_LINE_MIN_INSN_LENGTH 4 +#endif + +/* Flag that indicates the initial value of the is_stmt_start flag. + In the present implementation, we do not mark any lines as + the beginning of a source statement, because that information + is not made available by the GCC front-end. */ +#define DWARF2_LINE_DEFAULT_IS_STMT 1 + +/* Flag that indicates the initial value of the is_stmt_start flag. + In the present implementation, we do not mark any lines as + the beginning of a source statement, because that information + is not made available by the GCC front-end. */ +#define DWARF2_LINE_DEFAULT_IS_STMT 1 + +/* Given a special op, return the line skip amount: */ +#define SPECIAL_LINE(op) \ + (((op) - DWARF2_LINE_OPCODE_BASE)%DWARF2_LINE_RANGE + DWARF2_LINE_BASE) + +/* Given a special op, return the address skip amount (in units of + DWARF2_LINE_MIN_INSN_LENGTH. */ +#define SPECIAL_ADDR(op) (((op) - DWARF2_LINE_OPCODE_BASE)/DWARF2_LINE_RANGE) + +/* The maximum address skip amont that can be encoded with a special op: */ +#define MAX_SPECIAL_ADDR_DELTA SPECIAL_ADDR(255) + +#define INITIAL_STATE \ + /* initialize as per DWARF2.0 standard: */ \ + 0, /* address */ \ + 1, /* file */ \ + 1, /* line */ \ + 0, /* column */ \ + DWARF2_LINE_DEFAULT_IS_STMT, /* is_stmt */ \ + 0, /* basic_block */ \ + 1 /* empty_sequence */ + +static struct + { + /* state machine state as per DWARF2 manual: */ + struct dwarf2_sm + { + bfd_vma addr; + unsigned int filenum; + unsigned int line; + unsigned int column; + unsigned int + is_stmt : 1, + basic_block : 1, + empty_sequence : 1; /* current code sequence has no DWARF2 directives? */ + } + sm; + + unsigned int + any_dwarf2_directives : 1; /* did we emit any DWARF2 line debug directives? */ + + segT text_seg; /* text segment "addr" is relative to */ + subsegT text_subseg; + segT line_seg; /* ".debug_line" segment */ + int last_filename; /* index of last filename that was used */ + int num_filenames; /* index of last filename in use */ + int filename_len; /* length of the filename array */ + struct + { + int dir; /* valid after gen_dir_list() only */ + char *name; /* full path before gen_dir_list(), filename afterwards */ + } + *file; + + struct dwarf2_line_info current; /* current source info: */ + + /* counters for statistical purposes: */ + unsigned int num_line_entries; + unsigned int opcode_hist[256]; /* histogram of opcode frequencies */ + } +ls = + { + { + INITIAL_STATE + }, + }; + +#define out_byte(byte) FRAG_APPEND_1_CHAR(byte) +#define out_opcode(opc) (out_byte ((opc)), ++ls.opcode_hist[(opc) & 0xff]) + +/* Output an unsigned "little-endian base 128" number. */ +static void +out_uleb128 (bfd_vma value) +{ + unsigned char byte, more = 0x80; + + do + { + byte = value & 0x7f; + value >>= 7; + if (value == 0) + more = 0; + out_byte (more | byte); + } + while (more); +} + +/* Output a signed "little-endian base 128" number. */ +static void +out_sleb128 (bfd_signed_vma value) +{ + unsigned char byte, more = 0x80; + + do + { + byte = value & 0x7f; + value >>= 7; + if (((value == 0) && ((byte & 0x40) == 0)) + || ((value == -1) && ((byte & 0x40) != 0))) + more = 0; + out_byte (more | byte); + } + while (more); +} + +/* Encode a pair of line and address skips as efficiently as possible. + Note that the line skip is signed, whereas the address skip is + unsigned. */ +static void +gen_addr_line (int line_delta, bfd_vma addr_delta) +{ + unsigned int tmp, opcode; + + tmp = line_delta - DWARF2_LINE_BASE; + + if (tmp >= DWARF2_LINE_RANGE) + { + out_opcode (DW_LNS_advance_line); + out_sleb128 (line_delta); + tmp = 0 - DWARF2_LINE_BASE; + line_delta = 0; + } + + tmp += DWARF2_LINE_OPCODE_BASE; + + /* try using a special opcode: */ + opcode = tmp + addr_delta*DWARF2_LINE_RANGE; + if (opcode <= 255) + { + out_opcode (opcode); + return; + } + + /* try using DW_LNS_const_add_pc followed by special op: */ + opcode = tmp + (addr_delta - MAX_SPECIAL_ADDR_DELTA)*DWARF2_LINE_RANGE; + if (opcode <= 255) + { + out_opcode (DW_LNS_const_add_pc); + out_opcode (opcode); + return; + } + + out_opcode (DW_LNS_advance_pc); + out_uleb128 (addr_delta); + + if (line_delta) + out_opcode (tmp); /* output line-delta */ + else + out_opcode (DW_LNS_copy); /* append new row with current info */ +} + +static void +reset_state_machine (void) +{ + static const struct dwarf2_sm initial_state = { INITIAL_STATE }; + + ls.sm = initial_state; +} + +/* Set an absolute address (may results in a relocation entry): */ +static void +out_set_addr (bfd_vma addr) +{ + subsegT saved_subseg; + segT saved_seg; + expressionS expr; + symbolS *sym; + + saved_seg = now_seg; + saved_subseg = now_subseg; + + subseg_set (ls.text_seg, ls.text_subseg); + sym = symbol_new (".L0\001", now_seg, addr, frag_now); + + subseg_set (saved_seg, saved_subseg); + + out_opcode (DW_LNS_extended_op); + out_uleb128 (BYTES_PER_ADDRESS + 1); + + out_opcode (DW_LNE_set_address); + expr.X_op = O_symbol; + expr.X_add_symbol = sym; + expr.X_add_number = 0; + emit_expr (&expr, BYTES_PER_ADDRESS); +} + +/* Emit DW_LNS_end_sequence and reset state machine. Does not + preserve the current segment/sub-segment! */ +static void +out_end_sequence (void) +{ + bfd_vma addr, delta; + + if (ls.text_seg) + { + subseg_set (ls.text_seg, ls.text_subseg); +#ifdef md_current_text_addr + addr = md_current_text_addr (); +#else + addr = frag_now_fix (); +#endif + subseg_set (ls.line_seg, DL_BODY); + if (addr < ls.sm.addr) + { + out_set_addr (addr); + ls.sm.addr = addr; + } + else + { + delta = addr - ls.sm.addr; + if (delta > 0) + gen_addr_line (0, delta / DWARF2_LINE_MIN_INSN_LENGTH); + } + } + else + subseg_set (ls.line_seg, DL_BODY); + + out_opcode (DW_LNS_extended_op); + out_uleb128 (1); + out_byte (DW_LNE_end_sequence); + + reset_state_machine (); +} + +/* Look up a filenumber either by filename or by filenumber. If both + a filenumber and a filename are specified, lookup by filename takes + precedence. If the filename cannot be found, it is added to the + filetable the filenumber for the new entry is returned. */ +static int +get_filenum (int filenum, char *file) +{ + int i, last = filenum - 1; + char char0 = file[0]; + + if ((unsigned) last >= ls.num_filenames) + last = ls.last_filename; + + /* do a quick check against the previously used filename: */ + if (ls.num_filenames > 0 && ls.file[last].name[0] == char0 + && strcmp (ls.file[last].name + 1, file + 1) == 0) + return last + 1; + + /* no match, fall back to simple linear scan: */ + for (i = 0; i < ls.num_filenames; ++i) + { + if (ls.file[i].name[0] == char0 + && strcmp (ls.file[i].name + 1, file + 1) == 0) + { + ls.last_filename = i; + return i + 1; + } + } + + /* no match: enter new filename */ + if (ls.num_filenames >= ls.filename_len) + { + ls.filename_len += 13; + ls.file = xrealloc (ls.file, ls.filename_len * sizeof (ls.file[0])); + } + ls.file[ls.num_filenames].dir = 0; + ls.file[ls.num_filenames].name = file; + return ++ls.num_filenames; +} + +void +dwarf2_gen_line_info (bfd_vma addr, struct dwarf2_line_info *l) +{ + unsigned int filenum = l->filenum; + unsigned int any_output = 0; + subsegT saved_subseg; + segT saved_seg; + char *frag; + + if (flag_debug) + fprintf (stderr, "line: addr %llx file `%s' line %u col %u flags %lx\n", + (long long) addr, l->filename, l->line, l->column, l->flags); + + if (filenum > 0 && !l->filename) + { + if (filenum >= ls.num_filenames) + { + as_warn ("Encountered bad file number in line number debug info!"); + return; + } + } + else if (l->filename) + filenum = get_filenum (filenum, l->filename); + else + return; /* no filename, no filnum => no play */ + + if (!ls.line_seg) + { + symbolS *secsym; + + ls.line_seg = subseg_get (".debug_line", DL_BODY); + bfd_set_section_flags (stdoutput, ls.line_seg, SEC_READONLY); + secsym = symbol_find (".debug_line"); + if (secsym) + secsym->bsym = ls.line_seg->symbol; + else + symbol_table_insert (section_symbol (ls.line_seg)); + } + + saved_seg = now_seg; + saved_subseg = now_subseg; + subseg_set (ls.line_seg, DL_BODY); + + if (ls.text_seg != saved_seg || ls.text_subseg != saved_subseg) + { + if (!ls.sm.empty_sequence) + { + out_end_sequence (); /* terminate previous sequence */ + ls.sm.empty_sequence = 1; + } + any_output = 1; + ls.text_seg = saved_seg; + ls.text_subseg = saved_subseg; + out_set_addr (addr); + ls.sm.addr = addr; + } + + if (ls.sm.filenum != filenum) + { + any_output = 1; + out_opcode (DW_LNS_set_file); + out_uleb128 (filenum); + ls.sm.filenum = filenum; + } + + if (ls.sm.column != l->column) + { + any_output = 1; + out_opcode (DW_LNS_set_column); + out_uleb128 (l->column); + ls.sm.column = l->column; + } + + if (((l->flags & DWARF2_FLAG_BEGIN_STMT) != 0) != ls.sm.is_stmt) + { + any_output = 1; + out_opcode (DW_LNS_negate_stmt); + } + + if (l->flags & DWARF2_FLAG_BEGIN_BLOCK) + { + any_output = 1; + out_opcode (DW_LNS_set_basic_block); + } + + if (ls.sm.line != l->line) + { + any_output = 1; + if (addr < ls.sm.addr) + { + if (!ls.sm.empty_sequence) + { + out_end_sequence (); + ls.sm.empty_sequence = 1; + } + out_set_addr (addr); + ls.sm.addr = addr; + } + gen_addr_line (l->line - ls.sm.line, + (addr - ls.sm.addr) / DWARF2_LINE_MIN_INSN_LENGTH); + ls.sm.basic_block = 0; + ls.sm.line = l->line; + ls.sm.addr = addr; + } + + subseg_set (saved_seg, saved_subseg); + + ls.num_line_entries += any_output; + if (any_output) + ls.sm.empty_sequence = 0; +} + +static void +gen_dir_list (void) +{ + char *str, *slash, *dir_list, *dp, *cp; + int i, j, num_dirs; + + dir_list = frag_more (0); + num_dirs = 0; + + for (i = 0; i < ls.num_filenames; ++i) + { + str = ls.file[i].name; + slash = strrchr (str, '/'); + if (slash) + { + *slash = '\0'; + for (j = 0, dp = dir_list; j < num_dirs; ++j) + { + if (strcmp (str, dp) == 0) + { + ls.file[i].dir = j; + break; + } + dp += strlen (dp); + } + if (j >= num_dirs) + { + /* didn't find this directory: append it to the list */ + size_t size = strlen (str) + 1; + cp = frag_more (size); + memcpy (cp, str, size); + ls.file[i].dir = ++num_dirs; + } + *slash = '/'; + ls.file[i].name = slash + 1; + } + } + out_byte ('\0'); /* terminate directory list */ +} + +static void +gen_file_list (void) +{ + size_t size; + char *cp; + int i; + + for (i = 0; i < ls.num_filenames; ++i) + { + size = strlen (ls.file[i].name) + 1; + cp = frag_more (size); + memcpy (cp, ls.file[i].name, size); + + out_uleb128 (ls.file[i].dir); /* directory number */ + out_uleb128 (0); /* last modification timestamp */ + out_uleb128 (0); /* filesize */ + } + out_byte (0); /* terminate filename list */ +} + +void +print_stats (unsigned long total_size) +{ + static const char *opc_name[] = + { + "extended", "copy", "advance_pc", "advance_line", "set_file", + "set_column", "negate_stmt", "set_basic_block", "const_add_pc", + "fixed_advance_pc" + }; + int i, j; + + fprintf (stderr, "Average size: %g bytes/line\n", + total_size / (double) ls.num_line_entries); + + fprintf (stderr, "\nStandard opcode histogram:\n"); + + for (i = 0; i < sizeof (opc_name)/sizeof (opc_name[0]); ++i) + { + fprintf (stderr, "%s", opc_name[i]); + for (j = strlen (opc_name[i]); j < 16; ++j) + fprintf (stderr, " "); + fprintf (stderr, ": %u\n", ls.opcode_hist[i]); + } + + fprintf (stderr, "\nSpecial opcodes:\naddr\t\t\t\tline skip\n"); + + fprintf (stderr, "skip: "); + for (j = DWARF2_LINE_BASE; j < DWARF2_LINE_BASE + DWARF2_LINE_RANGE; ++j) + fprintf (stderr, "%3d", j); + fprintf (stderr, "\n-----"); + + for (; i < 256; ++i) + { + j = SPECIAL_LINE (i); + if (j == DWARF2_LINE_BASE) + fprintf (stderr, "\n%4u: ", + DWARF2_LINE_MIN_INSN_LENGTH*SPECIAL_ADDR (i)); + fprintf (stderr, " %2u", ls.opcode_hist[i]); + } + fprintf (stderr, "\n"); +} + +void +dwarf2_finish (void) +{ + bfd_vma addr, body_size, total_size, prolog_size; + subsegT saved_subseg, line_prolog; + segT saved_seg; + char *cp; + + if (!ls.line_seg) + /* no .debug_line segment, no work to do... */ + return; + + saved_seg = now_seg; + saved_subseg = now_subseg; + + if (!ls.sm.empty_sequence) + out_end_sequence (); + total_size = body_size = frag_now_fix (); + + /* now generate the directory and file lists: */ + subseg_set (ls.line_seg, DL_FILES); + gen_dir_list (); + gen_file_list (); + total_size += frag_now_fix (); + + /* and now the header ("statement program prolog", in DWARF2 lingo...) */ + subseg_set (ls.line_seg, DL_PROLOG); + + cp = frag_more (15 + DWARF2_LINE_OPCODE_BASE - 1); + + total_size += frag_now_fix (); + prolog_size = total_size - body_size - 10; + +# define STUFF(val,size) md_number_to_chars (cp, val, size); cp += size; + STUFF (total_size - 4, 4); /* length */ + STUFF (2, 2); /* version */ + STUFF (prolog_size, 4); /* prologue_length */ + STUFF (DWARF2_LINE_MIN_INSN_LENGTH, 1); + STUFF (DWARF2_LINE_DEFAULT_IS_STMT, 1); + STUFF (DWARF2_LINE_BASE, 1); + STUFF (DWARF2_LINE_RANGE, 1); + STUFF (DWARF2_LINE_OPCODE_BASE, 1); + + /* standard_opcode_lengths: */ + STUFF (0, 1); /* DW_LNS_copy */ + STUFF (1, 1); /* DW_LNS_advance_pc */ + STUFF (1, 1); /* DW_LNS_advance_line */ + STUFF (1, 1); /* DW_LNS_set_file */ + STUFF (1, 1); /* DW_LNS_set_column */ + STUFF (0, 1); /* DW_LNS_negate_stmt */ + STUFF (0, 1); /* DW_LNS_set_basic_block */ + STUFF (0, 1); /* DW_LNS_const_add_pc */ + STUFF (1, 1); /* DW_LNS_fixed_advance_pc */ + + subseg_set (saved_seg, saved_subseg); + + if (flag_debug) + print_stats (total_size); +} + +void +dwarf2_directive_file (int dummy) +{ + int len; + + ls.any_dwarf2_directives = 1; + + if (debug_type == DEBUG_NONE) + /* Automatically turn on DWARF2 debug info unless something else + has been selected. */ + debug_type = DEBUG_DWARF2; + + ls.current.filenum = get_absolute_expression (); + ls.current.filename = demand_copy_C_string (&len); + + demand_empty_rest_of_line (); +} + +void +dwarf2_directive_loc (int dummy) +{ + ls.any_dwarf2_directives = 1; + + ls.current.filenum = get_absolute_expression (); + SKIP_WHITESPACE (); + ls.current.line = get_absolute_expression (); + SKIP_WHITESPACE (); + ls.current.column = get_absolute_expression (); + demand_empty_rest_of_line (); + + ls.current.flags = DWARF2_FLAG_BEGIN_STMT; + +#ifndef NO_LISTING + if (listing) + listing_source_line (ls.current.line); +#endif +} + +void +dwarf2_where (struct dwarf2_line_info *line) +{ + if (ls.any_dwarf2_directives) + *line = ls.current; + else + { + char *filename; + + as_where (&line->filename, &line->line); + line->filenum = 0; + line->column = 0; + line->flags = DWARF2_FLAG_BEGIN_STMT; + } +} diff --git a/gas/dwarf2dbg.h b/gas/dwarf2dbg.h new file mode 100644 index 00000000000..dda8ab279ac --- /dev/null +++ b/gas/dwarf2dbg.h @@ -0,0 +1,48 @@ +#ifndef AS_DWARF2DBG_H +#define AS_DWARF2DBG_H + +#include "as.h" + +#define DWARF2_FLAG_BEGIN_STMT (1 << 0) /* beginning of statement */ +#define DWARF2_FLAG_BEGIN_BLOCK (1 << 1) /* beginning of basic block */ + +struct dwarf2_line_info + { + char *filename; + unsigned int filenum; + unsigned int line; + unsigned int column; + unsigned int flags; + }; + +/* Implements the .file FILENO "FILENAME" directive. FILENO can be 0 + to indicate that no file number has been assigned. All real file + number must be >0. */ +extern void dwarf2_directive_file (int dummy); + +/* Implements the .loc FILENO LINENO [COLUMN] directive. FILENO is + the file number, LINENO the line number and the (optional) COLUMN + the column of the source code that the following instruction + corresponds to. FILENO can be 0 to indicate that the filename + specified by the textually most recent .file directive should be + used. */ +extern void dwarf2_directive_loc (int dummy); + +/* Returns the current source information. If .file directives have + been encountered, the info for the corresponding source file is + returned. Otherwise, the info for the assembly source file is + returned. */ +extern void dwarf2_where (struct dwarf2_line_info *l); + +/* This function generates .debug_line info based on the address and + source information passed in the arguments. ADDR should be the + frag-relative offset of the instruction the information is for and + L is the source information that should be associated with that + address. */ +extern void dwarf2_gen_line_info (bfd_vma addr, struct dwarf2_line_info *l); + +/* Must be called after all other input is processed to finish up the + .debug_line section. */ +extern void dwarf2_finish (void); + +#endif /* AS_DWARF2DBG_H */