From: Ulrich Weigand Date: Tue, 5 May 2009 13:24:49 +0000 (+0000) Subject: * inferior.h (read_pc, write_pc): Remove. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=fb14de7bbddf9dc2f97af953b95b5aa5ea9889c4;p=binutils-gdb.git * inferior.h (read_pc, write_pc): Remove. * regcache.c (read_pc, write_pc): Remove. * infrun.c (displaced_step_fixup): Use regcache_read_pc instead of read_pc. (handle_inferior_event): Use regcache_read_pc instead of read_pc when determining value of stop_pc. Replace subsequent uses of read_pc by inspecting already-retrieved stop_pc value. (keep_going): Use regcache_read_pc instead of read_pc. * breakpoint.c (watchpoint_check): Use current frame architecture and PC instead of current_gdbarch and read_pc (). * tracepoint.c (set_traceframe_context): Replace PC argument with FRAME argument. (trace_start_command, finish_tfind_command): Update calls. (finish_tfind_command): Compare frame IDs to identify transitions between frames. (trace_find_pc_command): Use regcache_read_pc instead of read_pc. * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead of gdbarch. Use regcache_read_pc and regcache_write_pc instead of read_pc and write_pc. (store_register): Make regcache argument non-const. Update call to exec_one_dummy_insn. * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc. * infcmd.c (post_create_inferior): Likewise. * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise. * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise. * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise. * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise. * linux-fork.c (fork_load_infrun_state): Likewise. * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise. * record.c (record_wait): Likewise. * procfs.c (procfs_wait): Likewise. * remote-mips.c (common_open, mips_wait): Likewise. * remote-m32r-sdi.c (m32r_resume): Likewise. * symfile.c (generic_load): Use regcache_write_pc instead of write_pc. * monitor.c (monitor_create_inferior, monitor_load): Likewise. * m32r-rom.c (m32r_load, m32r_upload_command): Likewise. * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise. * remote-mips.c (mips_create_inferior, mips_load): Likewise. * solib-darwin.c: Include "regcache.h". * solib-pa64.c: Include "regcache.h". * solib-svr4.c: Include "regcache.h.". * symfile.c: Do not mention read_pc or write_pc in comments. * dink32-rom.c: Likewise. * m32r-rom.c: Likewise. * mips-tdep.c: Likewise. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index e5779080406..0435bcd5ca4 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,57 @@ +2009-05-05 Ulrich Weigand + + * inferior.h (read_pc, write_pc): Remove. + * regcache.c (read_pc, write_pc): Remove. + + * infrun.c (displaced_step_fixup): Use regcache_read_pc instead + of read_pc. + (handle_inferior_event): Use regcache_read_pc instead of read_pc + when determining value of stop_pc. Replace subsequent uses of + read_pc by inspecting already-retrieved stop_pc value. + (keep_going): Use regcache_read_pc instead of read_pc. + + * breakpoint.c (watchpoint_check): Use current frame architecture + and PC instead of current_gdbarch and read_pc (). + * tracepoint.c (set_traceframe_context): Replace PC argument + with FRAME argument. + (trace_start_command, finish_tfind_command): Update calls. + (finish_tfind_command): Compare frame IDs to identify transitions + between frames. + (trace_find_pc_command): Use regcache_read_pc instead of read_pc. + * rs6000-nat.c (exec_one_dummy_insn): Pass in regcache instead + of gdbarch. Use regcache_read_pc and regcache_write_pc instead + of read_pc and write_pc. + (store_register): Make regcache argument non-const. Update call + to exec_one_dummy_insn. + + * thread.c (switch_to_thread): Use regcache_read_pc instead of read_pc. + * infcmd.c (post_create_inferior): Likewise. + * solib-darwin.c (darwin_solib_create_inferior_hook): Likewise. + * solib-pa64.c (pa64_solib_create_inferior_hook): Likewise. + * solib-sunos.c (sunos_solib_create_inferior_hook): Likewise. + * solib-svr4.c (enable_break, svr4_relocate_main_executable): Likewise. + * linux-fork.c (fork_load_infrun_state): Likewise. + * hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise. + * record.c (record_wait): Likewise. + * procfs.c (procfs_wait): Likewise. + * remote-mips.c (common_open, mips_wait): Likewise. + * remote-m32r-sdi.c (m32r_resume): Likewise. + + * symfile.c (generic_load): Use regcache_write_pc instead of write_pc. + * monitor.c (monitor_create_inferior, monitor_load): Likewise. + * m32r-rom.c (m32r_load, m32r_upload_command): Likewise. + * remote-m32r-sdi.c (m32r_create_inferior, m32r_load): Likewise. + * remote-mips.c (mips_create_inferior, mips_load): Likewise. + + * solib-darwin.c: Include "regcache.h". + * solib-pa64.c: Include "regcache.h". + * solib-svr4.c: Include "regcache.h.". + + * symfile.c: Do not mention read_pc or write_pc in comments. + * dink32-rom.c: Likewise. + * m32r-rom.c: Likewise. + * mips-tdep.c: Likewise. + 2009-05-05 Ulrich Weigand * fork-child.c (startup_inferior): Move setting stop_pc ... diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c index c5b93a2a97c..35db0f375d1 100644 --- a/gdb/breakpoint.c +++ b/gdb/breakpoint.c @@ -2712,9 +2712,15 @@ watchpoint_check (void *p) that the watchpoint frame couldn't be found by frame_find_by_id() because the current PC is currently in an epilogue. Calling gdbarch_in_function_epilogue_p() also when fr == NULL fixes that. */ - if ((!within_current_scope || fr == get_current_frame ()) - && gdbarch_in_function_epilogue_p (current_gdbarch, read_pc ())) - return WP_VALUE_NOT_CHANGED; + if (!within_current_scope || fr == get_current_frame ()) + { + struct frame_info *frame = get_current_frame (); + struct gdbarch *frame_arch = get_frame_arch (frame); + CORE_ADDR frame_pc = get_frame_pc (frame); + + if (gdbarch_in_function_epilogue_p (frame_arch, frame_pc)) + return WP_VALUE_NOT_CHANGED; + } if (fr && within_current_scope) /* If we end up stopping, the current frame will get selected in normal_stop. So this call to select_frame won't affect diff --git a/gdb/dink32-rom.c b/gdb/dink32-rom.c index 0a41163571a..08dbe293d64 100644 --- a/gdb/dink32-rom.c +++ b/gdb/dink32-rom.c @@ -24,7 +24,7 @@ #include "monitor.h" #include "serial.h" #include "symfile.h" /* For generic_load() */ -#include "inferior.h" /* For write_pc() */ +#include "inferior.h" #include "regcache.h" static void dink32_open (char *args, int from_tty); diff --git a/gdb/hppa-hpux-tdep.c b/gdb/hppa-hpux-tdep.c index cad04f7b463..70077f9e288 100644 --- a/gdb/hppa-hpux-tdep.c +++ b/gdb/hppa-hpux-tdep.c @@ -1108,7 +1108,7 @@ hppa_hpux_push_dummy_code (struct gdbarch *gdbarch, CORE_ADDR sp, CORE_ADDR pc, stubaddr; int argreg = 0; - pc = read_pc (); + pc = regcache_read_pc (regcache); /* Note: we don't want to pass a function descriptor here; push_dummy_call fills in the PIC register for us. */ diff --git a/gdb/infcmd.c b/gdb/infcmd.c index a209848d2f6..ec83e3422fc 100644 --- a/gdb/infcmd.c +++ b/gdb/infcmd.c @@ -392,7 +392,7 @@ post_create_inferior (struct target_ops *target, int from_tty) target_find_description (); /* Now that we know the register layout, retrieve current PC. */ - stop_pc = read_pc (); + stop_pc = regcache_read_pc (get_current_regcache ()); /* If the solist is global across processes, there's no need to refetch it here. */ diff --git a/gdb/inferior.h b/gdb/inferior.h index c237e6e9ea6..c8f321a4112 100644 --- a/gdb/inferior.h +++ b/gdb/inferior.h @@ -152,10 +152,6 @@ extern void terminal_save_ours (void); extern void terminal_ours (void); -extern CORE_ADDR read_pc (void); - -extern void write_pc (CORE_ADDR); - extern CORE_ADDR unsigned_pointer_to_address (struct type *type, const gdb_byte *buf); extern void unsigned_address_to_pointer (struct type *type, gdb_byte *buf, diff --git a/gdb/infrun.c b/gdb/infrun.c index 5d9cc77b248..1876a01bfef 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -838,7 +838,7 @@ displaced_step_fixup (ptid_t event_ptid, enum target_signal signal) context_switch (ptid); - actual_pc = read_pc (); + actual_pc = regcache_read_pc (get_thread_regcache (ptid)); if (breakpoint_here_p (actual_pc)) { @@ -2425,7 +2425,7 @@ handle_inferior_event (struct execution_control_state *ecs) reinit_frame_cache (); } - stop_pc = read_pc (); + stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid)); ecs->event_thread->stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid); @@ -2454,7 +2454,7 @@ handle_inferior_event (struct execution_control_state *ecs) reinit_frame_cache (); } - stop_pc = read_pc (); + stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid)); /* This causes the eventpoints and symbol table to be reset. Must do this now, before trying to determine whether to @@ -2504,7 +2504,7 @@ handle_inferior_event (struct execution_control_state *ecs) case TARGET_WAITKIND_NO_HISTORY: /* Reverse execution: target ran out of history info. */ - stop_pc = read_pc (); + stop_pc = regcache_read_pc (get_thread_regcache (ecs->ptid)); print_stop_reason (NO_HISTORY, 0); stop_stepping (ecs); return; @@ -2852,7 +2852,7 @@ targets should add new threads to the thread list themselves in non-stop mode.") if (!HAVE_STEPPABLE_WATCHPOINT) remove_breakpoints (); /* Single step */ - hw_step = maybe_software_singlestep (current_gdbarch, read_pc ()); + hw_step = maybe_software_singlestep (current_gdbarch, stop_pc); target_resume (ecs->ptid, hw_step, TARGET_SIGNAL_0); registers_changed (); waiton_ptid = ecs->ptid; @@ -3083,7 +3083,7 @@ process_event_stop_test: if (signal_program[ecs->event_thread->stop_signal] == 0) ecs->event_thread->stop_signal = TARGET_SIGNAL_0; - if (ecs->event_thread->prev_pc == read_pc () + if (ecs->event_thread->prev_pc == stop_pc && ecs->event_thread->trap_expected && ecs->event_thread->step_resume_breakpoint == NULL) { @@ -4032,7 +4032,8 @@ static void keep_going (struct execution_control_state *ecs) { /* Save the pc before execution, to compare with pc after stop. */ - ecs->event_thread->prev_pc = read_pc (); /* Might have been DECR_AFTER_BREAK */ + ecs->event_thread->prev_pc + = regcache_read_pc (get_thread_regcache (ecs->ptid)); /* If we did not do break;, it means we should keep running the inferior and not return to debugger. */ diff --git a/gdb/linux-fork.c b/gdb/linux-fork.c index 861917d81bf..a020743ab39 100644 --- a/gdb/linux-fork.c +++ b/gdb/linux-fork.c @@ -250,7 +250,7 @@ fork_load_infrun_state (struct fork_info *fp) registers_changed (); reinit_frame_cache (); - stop_pc = read_pc (); + stop_pc = regcache_read_pc (get_current_regcache ()); nullify_last_target_wait_ptid (); /* Now restore the file positions of open file descriptors. */ @@ -280,7 +280,7 @@ fork_save_infrun_state (struct fork_info *fp, int clobber_regs) fp->savedregs = regcache_dup (get_current_regcache ()); fp->clobber_regs = clobber_regs; - fp->pc = read_pc (); + fp->pc = regcache_read_pc (get_current_regcache ()); if (clobber_regs) { @@ -501,7 +501,7 @@ info_forks_command (char *arg, int from_tty) if (ptid_equal (fp->ptid, inferior_ptid)) { printf_filtered ("* "); - pc = read_pc (); + pc = regcache_read_pc (get_current_regcache ()); } else { diff --git a/gdb/m32r-rom.c b/gdb/m32r-rom.c index a078be6a587..1491f229c0e 100644 --- a/gdb/m32r-rom.c +++ b/gdb/m32r-rom.c @@ -37,7 +37,7 @@ #include /* for time_t */ #include "gdb_string.h" #include "objfiles.h" /* for ALL_OBJFILES etc. */ -#include "inferior.h" /* for write_pc() */ +#include "inferior.h" #include #include "regcache.h" @@ -175,7 +175,8 @@ m32r_load (char *filename, int from_tty) /* Finally, make the PC point at the start address */ if (exec_bfd) - write_pc (bfd_get_start_address (exec_bfd)); + regcache_write_pc (get_current_regcache (), + bfd_get_start_address (exec_bfd)); inferior_ptid = null_ptid; /* No process now */ @@ -532,7 +533,8 @@ m32r_upload_command (char *args, int from_tty) gdb_flush (gdb_stdout); } /* Finally, make the PC point at the start address */ - write_pc (bfd_get_start_address (abfd)); + regcache_write_pc (get_current_regcache (), + bfd_get_start_address (abfd)); printf_filtered ("Start address 0x%lx\n", (unsigned long) bfd_get_start_address (abfd)); print_transfer_performance (gdb_stdout, data_count, 0, &start_time, diff --git a/gdb/mips-tdep.c b/gdb/mips-tdep.c index 345053c6b85..fa1c7636606 100644 --- a/gdb/mips-tdep.c +++ b/gdb/mips-tdep.c @@ -5796,7 +5796,7 @@ mips_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) reg_names = mips_generic_reg_names; } /* FIXME: cagney/2003-11-15: For MIPS, hasn't gdbarch_pc_regnum been - replaced by read_pc? */ + replaced by gdbarch_read_pc? */ set_gdbarch_pc_regnum (gdbarch, regnum->pc + num_regs); set_gdbarch_sp_regnum (gdbarch, MIPS_SP_REGNUM + num_regs); set_gdbarch_fp0_regnum (gdbarch, regnum->fp0); diff --git a/gdb/monitor.c b/gdb/monitor.c index 60db1dc5373..1b41a165ef6 100644 --- a/gdb/monitor.c +++ b/gdb/monitor.c @@ -2007,7 +2007,8 @@ monitor_create_inferior (struct target_ops *ops, char *exec_file, first_time = 1; clear_proceed_status (); - write_pc (bfd_get_start_address (exec_bfd)); + regcache_write_pc (get_current_regcache (), + bfd_get_start_address (exec_bfd)); } /* Clean up when a program exits. @@ -2155,7 +2156,8 @@ monitor_load (char *file, int from_tty) /* Finally, make the PC point at the start address */ if (exec_bfd) - write_pc (bfd_get_start_address (exec_bfd)); + regcache_write_pc (get_current_regcache (), + bfd_get_start_address (exec_bfd)); /* There used to be code here which would clear inferior_ptid and call clear_symtab_users. None of that should be necessary: diff --git a/gdb/procfs.c b/gdb/procfs.c index adb44f4e060..f62f0752fcf 100644 --- a/gdb/procfs.c +++ b/gdb/procfs.c @@ -4278,7 +4278,8 @@ wait_again: then remove it. See comments in procfs_init_inferior() for more details. */ if (dbx_link_bpt_addr != 0 - && dbx_link_bpt_addr == read_pc ()) + && dbx_link_bpt_addr + == regcache_read_pc (get_current_regcache ())) remove_dbx_link_breakpoint (); wstat = (SIGTRAP << 8) | 0177; diff --git a/gdb/record.c b/gdb/record.c index 40cc1745a9c..df59550b86f 100644 --- a/gdb/record.c +++ b/gdb/record.c @@ -608,7 +608,7 @@ record_wait (struct target_ops *ops, { /* Check if there is a breakpoint. */ registers_changed (); - tmp_pc = read_pc (); + tmp_pc = regcache_read_pc (get_current_regcache ()); if (breakpoint_inserted_here_p (tmp_pc)) { /* There is a breakpoint. */ diff --git a/gdb/regcache.c b/gdb/regcache.c index 2604d287f7c..13b9db45c34 100644 --- a/gdb/regcache.c +++ b/gdb/regcache.c @@ -841,12 +841,6 @@ regcache_read_pc (struct regcache *regcache) return pc_val; } -CORE_ADDR -read_pc (void) -{ - return regcache_read_pc (get_current_regcache ()); -} - void regcache_write_pc (struct regcache *regcache, CORE_ADDR pc) { @@ -862,12 +856,6 @@ regcache_write_pc (struct regcache *regcache, CORE_ADDR pc) _("regcache_write_pc: Unable to update PC")); } -void -write_pc (CORE_ADDR pc) -{ - regcache_write_pc (get_current_regcache (), pc); -} - static void reg_flush_command (char *command, int from_tty) diff --git a/gdb/remote-m32r-sdi.c b/gdb/remote-m32r-sdi.c index c7f908ebf4c..029cc089d72 100644 --- a/gdb/remote-m32r-sdi.c +++ b/gdb/remote-m32r-sdi.c @@ -348,7 +348,7 @@ m32r_create_inferior (struct target_ops *ops, char *execfile, /* Install inferior's terminal modes. */ target_terminal_inferior (); - write_pc (entry_pt); + regcache_write_pc (get_current_regcache (), entry_pt); } /* Open a connection to a remote debugger. @@ -464,7 +464,7 @@ m32r_resume (struct target_ops *ops, check_mmu_status (); - pc_addr = read_pc (); + pc_addr = regcache_read_pc (get_current_regcache ()); if (remote_debug) fprintf_unfiltered (gdb_stdlog, "pc <= 0x%lx\n", pc_addr); @@ -1355,7 +1355,8 @@ m32r_load (char *args, int from_tty) /* Make the PC point at the start address */ if (exec_bfd) - write_pc (bfd_get_start_address (exec_bfd)); + regcache_write_pc (get_current_regcache (), + bfd_get_start_address (exec_bfd)); inferior_ptid = null_ptid; /* No process now */ delete_thread_silent (remote_m32r_ptid); diff --git a/gdb/remote-mips.c b/gdb/remote-mips.c index b35bb629cd6..152fb379ac4 100644 --- a/gdb/remote-mips.c +++ b/gdb/remote-mips.c @@ -1573,7 +1573,7 @@ device is attached to the target board (e.g., /dev/ttya).\n" reinit_frame_cache (); registers_changed (); - stop_pc = read_pc (); + stop_pc = regcache_read_pc (get_current_regcache ()); print_stack_frame (get_selected_frame (NULL), 0, SRC_AND_LOC); xfree (serial_port_name); } @@ -1792,7 +1792,7 @@ mips_wait (struct target_ops *ops, fetch breakpoint, not a data watchpoint. FIXME when PMON provides some way to tell us what type of breakpoint it is. */ int i; - CORE_ADDR pc = read_pc (); + CORE_ADDR pc = regcache_read_pc (get_current_regcache ()); hit_watchpoint = 1; for (i = 0; i < MAX_LSI_BREAKPOINTS; i++) @@ -1843,7 +1843,7 @@ mips_wait (struct target_ops *ops, { char *func_name; CORE_ADDR func_start; - CORE_ADDR pc = read_pc (); + CORE_ADDR pc = regcache_read_pc (get_current_regcache ()); find_pc_partial_function (pc, &func_name, &func_start, NULL); if (func_name != NULL && strcmp (func_name, "_exit") == 0 @@ -2204,7 +2204,7 @@ Can't pass arguments to remote MIPS board; arguments ignored."); /* FIXME: Should we set inferior_ptid here? */ - write_pc (entry_pt); + regcache_write_pc (get_current_regcache (), entry_pt); } /* Clean up after a process. Actually nothing to do. */ @@ -3258,6 +3258,8 @@ pmon_load_fast (char *file) static void mips_load (char *file, int from_tty) { + struct regcache *regcache; + /* Get the board out of remote debugging mode. */ if (mips_exit_debug ()) error ("mips_load: Couldn't get into monitor mode."); @@ -3270,17 +3272,17 @@ mips_load (char *file, int from_tty) mips_initialize (); /* Finally, make the PC point at the start address */ + regcache = get_current_regcache (); if (mips_monitor != MON_IDT) { /* Work around problem where PMON monitor updates the PC after a load to a different value than GDB thinks it has. The following ensures - that the write_pc() WILL update the PC value: */ - struct regcache *regcache = get_current_regcache (); + that the regcache_write_pc() WILL update the PC value: */ regcache_invalidate (regcache, gdbarch_pc_regnum (get_regcache_arch (regcache))); } if (exec_bfd) - write_pc (bfd_get_start_address (exec_bfd)); + regcache_write_pc (regcache, bfd_get_start_address (exec_bfd)); inferior_ptid = null_ptid; /* No process now */ diff --git a/gdb/rs6000-nat.c b/gdb/rs6000-nat.c index 52411830e4c..8aeef25b5c6 100644 --- a/gdb/rs6000-nat.c +++ b/gdb/rs6000-nat.c @@ -130,7 +130,7 @@ static int objfile_symbol_add (void *); static void vmap_symtab (struct vmap *); -static void exec_one_dummy_insn (struct gdbarch *); +static void exec_one_dummy_insn (struct regcache *); extern void fixup_breakpoints (CORE_ADDR low, CORE_ADDR high, CORE_ADDR delta); @@ -267,7 +267,7 @@ fetch_register (struct regcache *regcache, int regno) /* Store register REGNO back into the inferior. */ static void -store_register (const struct regcache *regcache, int regno) +store_register (struct regcache *regcache, int regno) { struct gdbarch *gdbarch = get_regcache_arch (regcache); int addr[MAX_REGISTER_SIZE]; @@ -303,7 +303,7 @@ store_register (const struct regcache *regcache, int regno) Otherwise the following ptrace(2) calls will mess up user stack since kernel will get confused about the bottom of the stack (%sp). */ - exec_one_dummy_insn (gdbarch); + exec_one_dummy_insn (regcache); /* The PT_WRITE_GPR operation is rather odd. For 32-bit inferiors, the register's value is passed by value, but for 64-bit inferiors, @@ -577,7 +577,7 @@ rs6000_wait (struct target_ops *ops, including u_area. */ static void -exec_one_dummy_insn (struct gdbarch *gdbarch) +exec_one_dummy_insn (struct regcache *regcache) { #define DUMMY_INSN_ADDR AIX_TEXT_SEGMENT_BASE+0x200 @@ -596,8 +596,8 @@ exec_one_dummy_insn (struct gdbarch *gdbarch) on. However, rs6000-ibm-aix4.1.3 seems to have screwed this up -- the inferior never hits the breakpoint (it's also worth noting powerpc-ibm-aix4.1.3 works correctly). */ - prev_pc = read_pc (); - write_pc (DUMMY_INSN_ADDR); + prev_pc = regcache_read_pc (regcache); + regcache_write_pc (regcache, DUMMY_INSN_ADDR); if (ARCH64 ()) ret = rs6000_ptrace64 (PT_CONTINUE, PIDGET (inferior_ptid), 1, 0, NULL); else @@ -612,7 +612,7 @@ exec_one_dummy_insn (struct gdbarch *gdbarch) } while (pid != PIDGET (inferior_ptid)); - write_pc (prev_pc); + regcache_write_pc (regcache, prev_pc); deprecated_remove_raw_breakpoint (bp); } diff --git a/gdb/solib-darwin.c b/gdb/solib-darwin.c index 3305804e3a8..26ff1ccce5b 100644 --- a/gdb/solib-darwin.c +++ b/gdb/solib-darwin.c @@ -26,6 +26,7 @@ #include "gdbcore.h" #include "target.h" #include "inferior.h" +#include "regcache.h" #include "gdbthread.h" #include "gdb_assert.h" @@ -332,7 +333,8 @@ darwin_solib_create_inferior_hook (void) /* We find the dynamic linker's base address by examining the current pc (which should point at the entry point for the dynamic linker) and subtracting the offset of the entry point. */ - load_addr = (read_pc () - bfd_get_start_address (dyld_bfd)); + load_addr = (regcache_read_pc (get_current_regcache ()) + - bfd_get_start_address (dyld_bfd)); } else { diff --git a/gdb/solib-pa64.c b/gdb/solib-pa64.c index 9cbf5a63539..70dc51af233 100644 --- a/gdb/solib-pa64.c +++ b/gdb/solib-pa64.c @@ -36,6 +36,7 @@ #include "gdbcore.h" #include "target.h" #include "inferior.h" +#include "regcache.h" #include "hppa-tdep.h" #include "solist.h" @@ -421,7 +422,8 @@ pa64_solib_create_inferior_hook (void) Also note the breakpoint is the second instruction in the routine. */ - load_addr = read_pc () - tmp_bfd->start_address; + load_addr = regcache_read_pc (get_current_regcache ()) + - tmp_bfd->start_address; sym_addr = bfd_lookup_symbol (tmp_bfd, "__dld_break"); sym_addr = load_addr + sym_addr + 4; diff --git a/gdb/solib-sunos.c b/gdb/solib-sunos.c index a400e92fd7a..8cb2dfe2d9d 100644 --- a/gdb/solib-sunos.c +++ b/gdb/solib-sunos.c @@ -791,7 +791,7 @@ sunos_solib_create_inferior_hook (void) if (gdbarch_decr_pc_after_break (target_gdbarch)) { stop_pc -= gdbarch_decr_pc_after_break (target_gdbarch); - write_pc (stop_pc); + regcache_write_pc (get_current_regcache (), stop_pc); } if (!disable_break ()) diff --git a/gdb/solib-svr4.c b/gdb/solib-svr4.c index 781cef5380b..31c81f8f561 100644 --- a/gdb/solib-svr4.c +++ b/gdb/solib-svr4.c @@ -32,6 +32,7 @@ #include "gdbcore.h" #include "target.h" #include "inferior.h" +#include "regcache.h" #include "gdbthread.h" #include "gdb_assert.h" @@ -1289,8 +1290,11 @@ enable_break (void) fallback method because it has actually been working well in most cases. */ if (!load_addr_found) - load_addr = (read_pc () - - exec_entry_point (tmp_bfd, tmp_bfd_target)); + { + struct regcache *regcache = get_thread_regcache (inferior_ptid); + load_addr = (regcache_read_pc (regcache) + - exec_entry_point (tmp_bfd, tmp_bfd_target)); + } if (!loader_found_in_list) { @@ -1424,7 +1428,8 @@ static void svr4_relocate_main_executable (void) { asection *interp_sect; - CORE_ADDR pc = read_pc (); + struct regcache *regcache = get_thread_regcache (inferior_ptid); + CORE_ADDR pc = regcache_read_pc (regcache); /* Decide if the objfile needs to be relocated. As indicated above, we will only be here when execution is stopped at the beginning diff --git a/gdb/symfile.c b/gdb/symfile.c index af1ab744b40..527b0d57398 100644 --- a/gdb/symfile.c +++ b/gdb/symfile.c @@ -37,7 +37,8 @@ #include "language.h" #include "complaints.h" #include "demangle.h" -#include "inferior.h" /* for write_pc */ +#include "inferior.h" +#include "regcache.h" #include "filenames.h" /* for DOSish file names */ #include "gdb-stabs.h" #include "gdb_obstack.h" @@ -1986,7 +1987,7 @@ generic_load (char *args, int from_tty) ui_out_text (uiout, "\n"); /* We were doing this in remote-mips.c, I suspect it is right for other targets too. */ - write_pc (entry); + regcache_write_pc (get_current_regcache (), entry); /* FIXME: are we supposed to call symbol_file_add or not? According to a comment from remote-mips.c (where a call to symbol_file_add diff --git a/gdb/thread.c b/gdb/thread.c index 0ce24c64a9e..ffb93bedc08 100644 --- a/gdb/thread.c +++ b/gdb/thread.c @@ -852,7 +852,7 @@ switch_to_thread (ptid_t ptid) if (!ptid_equal (inferior_ptid, null_ptid) && !is_exited (ptid) && !is_executing (ptid)) - stop_pc = read_pc (); + stop_pc = regcache_read_pc (get_thread_regcache (ptid)); else stop_pc = ~(CORE_ADDR) 0; } diff --git a/gdb/tracepoint.c b/gdb/tracepoint.c index 194d7299a01..dece79964f4 100644 --- a/gdb/tracepoint.c +++ b/gdb/tracepoint.c @@ -224,15 +224,17 @@ set_tracepoint_num (int num) the traceframe context (line, function, file) */ static void -set_traceframe_context (CORE_ADDR trace_pc) +set_traceframe_context (struct frame_info *trace_frame) { + CORE_ADDR trace_pc; + static struct type *func_string, *file_string; static struct type *func_range, *file_range; struct value *func_val; struct value *file_val; int len; - if (trace_pc == -1) /* Cease debugging any trace buffers. */ + if (trace_frame == NULL) /* Cease debugging any trace buffers. */ { traceframe_fun = 0; traceframe_sal.pc = traceframe_sal.line = 0; @@ -248,6 +250,7 @@ set_traceframe_context (CORE_ADDR trace_pc) } /* Save as globals for internal use. */ + trace_pc = get_frame_pc (trace_frame); traceframe_sal = find_pc_line (trace_pc, 0); traceframe_fun = find_pc_function (trace_pc); @@ -1319,7 +1322,7 @@ trace_start_command (char *args, int from_tty) error (_("Bogus reply from target: %s"), target_buf); set_traceframe_num (-1); /* All old traceframes invalidated. */ set_tracepoint_num (-1); - set_traceframe_context (-1); + set_traceframe_context (NULL); trace_running_p = 1; if (deprecated_trace_start_stop_hook) deprecated_trace_start_stop_hook (1, from_tty); @@ -1447,12 +1450,10 @@ finish_tfind_command (char **msg, int from_tty) { int target_frameno = -1, target_tracept = -1; - CORE_ADDR old_frame_addr; - struct symbol *old_func; + struct frame_id old_frame_id; char *reply; - old_frame_addr = get_frame_base (get_current_frame ()); - old_func = find_pc_function (read_pc ()); + old_frame_id = get_frame_id (get_current_frame ()); putpkt (*msg); reply = remote_get_noisy_reply (msg, sizeof_msg); @@ -1517,9 +1518,9 @@ finish_tfind_command (char **msg, set_traceframe_num (target_frameno); set_tracepoint_num (target_tracept); if (target_frameno == -1) - set_traceframe_context (-1); + set_traceframe_context (NULL); else - set_traceframe_context (read_pc ()); + set_traceframe_context (get_current_frame ()); if (from_tty) { @@ -1529,18 +1530,10 @@ finish_tfind_command (char **msg, whether we have made a transition from one function to another. If so, we'll print the "stack frame" (ie. the new function and it's arguments) -- otherwise we'll just show the - new source line. - - This determination is made by checking (1) whether the - current function has changed, and (2) whether the current FP - has changed. Hack: if the FP wasn't collected, either at the - current or the previous frame, assume that the FP has NOT - changed. */ - - if (old_func == find_pc_function (read_pc ()) && - (old_frame_addr == 0 || - get_frame_base (get_current_frame ()) == 0 || - old_frame_addr == get_frame_base (get_current_frame ()))) + new source line. */ + + if (frame_id_eq (old_frame_id, + get_frame_id (get_current_frame ()))) print_what = SRC_LINE; else print_what = SRC_AND_LOC; @@ -1635,7 +1628,7 @@ trace_find_pc_command (char *args, int from_tty) if (target_is_remote ()) { if (args == 0 || *args == 0) - pc = read_pc (); /* default is current pc */ + pc = regcache_read_pc (get_current_regcache ()); else pc = parse_and_eval_address (args);