From: Shyam Saini Date: Fri, 26 Apr 2019 09:37:37 +0000 (+0530) Subject: configs/olimex_a33_olinuxino: new defconfig X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=fb61cf213cca7e650df0601e15582fc28b4058bd;p=buildroot.git configs/olimex_a33_olinuxino: new defconfig This initial support includes: u-boot v2019.04 Linux v5.0 Buildroot default packages Signed-off-by: Shyam Saini [Thomas: use BR2_TARGET_UBOOT_BOOT_SCRIPT to generate the U-Boot script, instead of doing it in the post-build] Signed-off-by: Thomas Petazzoni --- diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 3e37580e63..311ddb7780 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -227,6 +227,7 @@ olimex_a13_olinuxino_defconfig: { extends: .defconfig } olimex_a20_olinuxino_lime2_defconfig: { extends: .defconfig } olimex_a20_olinuxino_lime_defconfig: { extends: .defconfig } olimex_a20_olinuxino_micro_defconfig: { extends: .defconfig } +olimex_a33_olinuxino_defconfig: { extends: .defconfig } olimex_a64_olinuxino_defconfig: { extends: .defconfig } olimex_imx233_olinuxino_defconfig: { extends: .defconfig } openblocks_a6_defconfig: { extends: .defconfig } diff --git a/DEVELOPERS b/DEVELOPERS index c6b21559e5..2956528a8e 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2066,10 +2066,12 @@ F: package/wolfssl/ N: Shyam Saini F: board/friendlyarm/nanopi-neo4/ F: board/friendlyarm/nanopc-t4/ +F: board/olimex/a33_olinuxino/ F: board/radxa/rock-pi4/ F: board/pine64/rockpro64/ F: configs/nanopi_neo4_defconfig F: configs/nanopc_t4_defconfig +F: configs/olimex_a33_olinuxino_defconfig F: configs/pine64_rockpro64_defconfig F: configs/radxa_rock_pi4_defconfig diff --git a/board/olimex/a33_olinuxino/boot.cmd b/board/olimex/a33_olinuxino/boot.cmd new file mode 100644 index 0000000000..44d9239a94 --- /dev/null +++ b/board/olimex/a33_olinuxino/boot.cmd @@ -0,0 +1,5 @@ +setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p1 rootwait panic=10 ${extra} +ext4load mmc 0 0x49000000 /boot/${fdtfile} +ext4load mmc 0 0x46000000 /boot/zImage +env set fdt_high ffffffff +bootz 0x46000000 - 0x49000000 diff --git a/board/olimex/a33_olinuxino/genimage.cfg b/board/olimex/a33_olinuxino/genimage.cfg new file mode 100644 index 0000000000..fc2f7f8d76 --- /dev/null +++ b/board/olimex/a33_olinuxino/genimage.cfg @@ -0,0 +1,17 @@ +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + size = 1040384 # 1MB - 8192 + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +} diff --git a/board/olimex/a33_olinuxino/post-build.sh b/board/olimex/a33_olinuxino/post-build.sh new file mode 100755 index 0000000000..b418120652 --- /dev/null +++ b/board/olimex/a33_olinuxino/post-build.sh @@ -0,0 +1,2 @@ +#!/bin/sh +cp $BINARIES_DIR/boot.scr $TARGET_DIR/boot/boot.scr diff --git a/board/olimex/a33_olinuxino/readme.txt b/board/olimex/a33_olinuxino/readme.txt new file mode 100644 index 0000000000..b19060200c --- /dev/null +++ b/board/olimex/a33_olinuxino/readme.txt @@ -0,0 +1,50 @@ +A33-OLinuXino + +Intro +===== + +This board is based on Allwinner A33 SoC. + +Home Page: https://www.olimex.com/Products/OLinuXino/A33/A33-OLinuXino/open-source-hardware +Wiki: https://wiki.amarulasolutions.com/bsp/sunxi/a33/Olimex-A33-Olinuxino.html + +How to build it +=============== + +Configure Buildroot: + + $ make olimex_a33_olinuxino_defconfig + +Build everything by running: + + $ make + +Result of the build +------------------- + +After building, you should get a tree like this: + +output/images/ +├── boot.scr +├── rootfs.ext2 +├── rootfs.ext4 -> rootfs.ext2 +├── rootfs.tar +├── sdcard.img +├── sun8i-a33-olinuxino.dtb +├── u-boot.bin +├── u-boot-sunxi-with-spl.bin +└── zImage + + +How to write the SD card +======================== + +The sdcard.img file is a complete bootable image ready to be written +on the boot medium. To install it, simply copy the image to a uSD +card: + + # dd if=output/images/sdcard.img of=/dev/sdX + +Where 'sdX' is the device node of the uSD. + +Eject the SD card, insert it in the A33-OLinuXino board, and power it up. diff --git a/configs/olimex_a33_olinuxino_defconfig b/configs/olimex_a33_olinuxino_defconfig new file mode 100644 index 0000000000..c71bdb1fb4 --- /dev/null +++ b/configs/olimex_a33_olinuxino_defconfig @@ -0,0 +1,48 @@ +# Architecture +BR2_arm=y +BR2_cortex_a7=y + +# Linux headers same as kernel, a 5.0 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y + +# System configuration +BR2_TARGET_GENERIC_HOSTNAME="A33-olinuxino" +BR2_TARGET_GENERIC_ISSUE="Welcome to A33 OLinuXino!" +BR2_TARGET_GENERIC_GETTY=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" + +# Bootloaders +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.04" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A33-OLinuXino" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" +BR2_TARGET_UBOOT_BOOT_SCRIPT=y +BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/olimex/a33_olinuxino/boot.cmd" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" +BR2_LINUX_KERNEL_USE_DEFCONFIG=y +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-a33-olinuxino" +BR2_LINUX_KERNEL_INSTALL_TARGET=y + +# Filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a33_olinuxino/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/olimex/a33_olinuxino/genimage.cfg" + +# Additional tools +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_PACKAGE_HOST_MTOOLS=y