From: Chia-I Wu Date: Wed, 22 May 2013 04:19:13 +0000 (+0800) Subject: ilo: set more fields of 3DSTATE_DEPTH_BUFFER X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=ff68f61bedc2d910b98af4ef4475373f4d3958a3;p=mesa.git ilo: set more fields of 3DSTATE_DEPTH_BUFFER Set lod/layer related fields of 3DSTATE_DEPTH_BUFFER. Since we always point to a single level/layer, those fields are always zero and this commit effectively makes no change. While at it, make it easier to disable manual slice offset calculation. --- diff --git a/src/gallium/drivers/ilo/ilo_gpe_gen6.c b/src/gallium/drivers/ilo/ilo_gpe_gen6.c index 4102b2149a3..08161aaa227 100644 --- a/src/gallium/drivers/ilo/ilo_gpe_gen6.c +++ b/src/gallium/drivers/ilo/ilo_gpe_gen6.c @@ -2283,10 +2283,13 @@ ilo_gpe_gen6_emit_3DSTATE_DEPTH_BUFFER(const struct ilo_dev_info *dev, ILO_GPE_CMD(0x3, 0x0, 0x05) : ILO_GPE_CMD(0x3, 0x1, 0x05); const uint8_t cmd_len = 7; const int max_2d_size = (dev->gen >= ILO_GEN(7)) ? 16384 : 8192; + const int max_array_size = (dev->gen >= ILO_GEN(7)) ? 2048 : 512; struct ilo_texture *tex; - uint32_t dw1, dw3; + uint32_t dw1, dw3, dw4, dw6; uint32_t slice_offset, x_offset, y_offset; - int surface_type, depth_format, width, height; + int surface_type, depth_format; + unsigned lod, first_layer, num_layers; + unsigned width, height, depth; bool separate_stencil, has_depth, has_stencil; ILO_GPE_VALID_GEN(dev, 6, 7); @@ -2338,69 +2341,118 @@ ilo_gpe_gen6_emit_3DSTATE_DEPTH_BUFFER(const struct ilo_dev_info *dev, } tex = ilo_texture(surface->texture); + surface_type = ilo_gpe_gen6_translate_texture(tex->base.target); - width = surface->width; - height = surface->height; + lod = surface->u.tex.level; + first_layer = surface->u.tex.first_layer; + num_layers = surface->u.tex.last_layer - first_layer + 1; + + width = tex->base.width0; + height = tex->base.height0; + depth = (tex->base.target == PIPE_TEXTURE_3D) ? + tex->base.depth0 : num_layers; + + if (surface_type == BRW_SURFACE_CUBE) { + /* + * From the Sandy Bridge PRM, volume 2 part 1, page 325-326: + * + * "For Other Surfaces (Cube Surfaces): + * This field (Minimum Array Element) is ignored." + * + * "For Other Surfaces (Cube Surfaces): + * This field (Render Target View Extent) is ignored." + * + * As such, we cannot set first_layer and num_layers on cube surfaces. + * To work around that, treat it as a 2D surface. + */ + surface_type = BRW_SURFACE_2D; + } /* * we always treat the resource as non-mipmapped and set the slice/x/y * offsets manually */ - slice_offset = ilo_texture_get_slice_offset(tex, - surface->u.tex.level, surface->u.tex.first_layer, - &x_offset, &y_offset); + if (true) { + /* no layered rendering */ + assert(num_layers == 1); - /* - * From the Sandy Bridge PRM, volume 2 part 1, page 326: - * - * "The 3 LSBs of both offsets (Depth Coordinate Offset Y and Depth - * Coordinate Offset X) must be zero to ensure correct alignment" - * - * XXX Skip the check for gen6, which seems to be fine. We need to make - * sure that does not happen eventually. - */ - if (dev->gen >= ILO_GEN(7)) { - assert((x_offset & 7) == 0 && (y_offset & 7) == 0); - x_offset &= ~7; - y_offset &= ~7; - } + slice_offset = ilo_texture_get_slice_offset(tex, + lod, first_layer, &x_offset, &y_offset); - width += x_offset; - height += y_offset; + /* + * From the Sandy Bridge PRM, volume 2 part 1, page 326: + * + * "The 3 LSBs of both offsets (Depth Coordinate Offset Y and Depth + * Coordinate Offset X) must be zero to ensure correct alignment" + * + * XXX Skip the check for gen6, which seems to be fine. We need to make + * sure that does not happen eventually. + */ + if (dev->gen >= ILO_GEN(7)) { + assert((x_offset & 7) == 0 && (y_offset & 7) == 0); + x_offset &= ~7; + y_offset &= ~7; + } + + /* the size of the layer */ + width = u_minify(width, lod); + height = u_minify(height, lod); + if (surface_type == BRW_SURFACE_3D) + depth = u_minify(depth, lod); + else + depth = 1; + + lod = 0; + first_layer = 0; + + width += x_offset; + height += y_offset; + + /* we have to treat them as 2D surfaces */ + if (surface_type == BRW_SURFACE_CUBE) { + assert(tex->base.width0 == tex->base.height0); + /* we will set slice_offset to point to the single face */ + surface_type = BRW_SURFACE_2D; + } + else if (surface_type == BRW_SURFACE_1D && height > 1) { + assert(tex->base.height0 == 1); + surface_type = BRW_SURFACE_2D; + } + } + else { + slice_offset = 0; + x_offset = 0; + y_offset = 0; + } /* required for GEN6+ */ assert(tex->tiling == INTEL_TILING_Y); - assert(tex->bo_stride > 0 && tex->bo_stride < 128 * 1024 && tex->bo_stride % 128 == 0); - assert(surface->u.tex.first_layer == surface->u.tex.last_layer); assert(width <= tex->bo_stride); - /* we have to treat them as 2D surfaces */ - if (surface_type == BRW_SURFACE_CUBE) { - assert(surface->width == surface->height); - /* we will set slice_offset to point to the single face */ - surface_type = BRW_SURFACE_2D; - } - else if (surface_type == BRW_SURFACE_1D && height > 1) { - assert(surface->height == 1); - surface_type = BRW_SURFACE_2D; - } - switch (surface_type) { case BRW_SURFACE_1D: - assert(width <= max_2d_size && height == 1); + assert(width <= max_2d_size && height == 1 && + depth <= max_array_size); + assert(first_layer < max_array_size - 1 && + num_layers <= max_array_size); break; case BRW_SURFACE_2D: - assert(width <= max_2d_size && height <= max_2d_size); + assert(width <= max_2d_size && height <= max_2d_size && + depth <= max_array_size); + assert(first_layer < max_array_size - 1 && + num_layers <= max_array_size); break; case BRW_SURFACE_3D: - assert(width <= 2048 && height <= 2048); + assert(width <= 2048 && height <= 2048 && depth <= 2048); + assert(first_layer < 2048 && num_layers <= max_array_size); assert(x_offset == 0 && y_offset == 0); break; case BRW_SURFACE_CUBE: - assert(width <= max_2d_size && height <= max_2d_size && - width == height); + assert(width <= max_2d_size && height <= max_2d_size && depth == 1); + assert(first_layer == 0 && num_layers == 1); + assert(width == height); assert(x_offset == 0 && y_offset == 0); break; default: @@ -2425,7 +2477,13 @@ ilo_gpe_gen6_emit_3DSTATE_DEPTH_BUFFER(const struct ilo_dev_info *dev, dw1 |= 1 << 27; dw3 = (height - 1) << 18 | - (width - 1) << 4; + (width - 1) << 4 | + lod; + + dw4 = (depth - 1) << 21 | + first_layer << 10; + + dw6 = (num_layers - 1) << 21; } else { dw1 |= (tex->tiling != INTEL_TILING_NONE) << 27 | @@ -2438,7 +2496,14 @@ ilo_gpe_gen6_emit_3DSTATE_DEPTH_BUFFER(const struct ilo_dev_info *dev, dw3 = (height - 1) << 19 | (width - 1) << 6 | + lod << 2 | BRW_SURFACE_MIPMAPLAYOUT_BELOW << 1; + + dw4 = (depth - 1) << 21 | + first_layer << 10 | + (num_layers - 1) << 1; + + dw6 = 0; } ilo_cp_begin(cp, cmd_len); @@ -2454,9 +2519,9 @@ ilo_gpe_gen6_emit_3DSTATE_DEPTH_BUFFER(const struct ilo_dev_info *dev, } ilo_cp_write(cp, dw3); - ilo_cp_write(cp, 0); + ilo_cp_write(cp, dw4); ilo_cp_write(cp, y_offset << 16 | x_offset); - ilo_cp_write(cp, 0); + ilo_cp_write(cp, dw6); ilo_cp_end(cp); } @@ -2659,10 +2724,17 @@ gen6_emit_3DSTATE_STENCIL_BUFFER(const struct ilo_dev_info *dev, return; } - slice_offset = ilo_texture_get_slice_offset(tex, - surface->u.tex.level, surface->u.tex.first_layer, - &x_offset, &y_offset); - /* XXX X/Y offsets inherit from 3DSTATE_DEPTH_BUFFER */ + if (true) { + slice_offset = ilo_texture_get_slice_offset(tex, + surface->u.tex.level, surface->u.tex.first_layer, + &x_offset, &y_offset); + /* XXX X/Y offsets inherit from 3DSTATE_DEPTH_BUFFER */ + } + else { + slice_offset = 0; + x_offset = 0; + y_offset = 0; + } /* * From the Sandy Bridge PRM, volume 2 part 1, page 329: