From: Luke Kenneth Casson Leighton Date: Fri, 20 Jul 2018 03:49:52 +0000 (+0100) Subject: add start of peripheral generation X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=ffb5580b4ea2cf748176b8a5e94f6d8b8cf27262;p=pinmux.git add start of peripheral generation --- diff --git a/src/bsv/bsv_lib/slow_peripherals_template.bsv b/src/bsv/bsv_lib/slow_peripherals_template.bsv new file mode 100644 index 0000000..2970c3c --- /dev/null +++ b/src/bsv/bsv_lib/slow_peripherals_template.bsv @@ -0,0 +1,501 @@ +package slow_peripherals; + /*===== Project imports =====*/ + import defined_types::*; + import AXI4_Lite_Fabric::*; + import AXI4_Lite_Types::*; + import AXI4_Fabric::*; + import AXI4_Types::*; + import Semi_FIFOF::*; + import AXI4Lite_AXI4_Bridge::*; + `include "instance_defines.bsv" + /*===========================*/ + /*=== package imports ===*/ + import Clocks::*; + import GetPut::*; + import ClientServer::*; + import Connectable::*; + import Vector::*; + import FIFO::*; + /*=======================*/ + /*===== Import the slow peripherals ====*/ +{0} + `ifdef AXIEXP + import axiexpansion ::*; + `endif + import pinmux::*; + import mux::*; + import gpio::*; + /*=====================================*/ + + /*===== interface declaration =====*/ + interface SP_ios; +{1} + `ifdef AXIEXP + interface Get#(Bit#(67)) axiexp1_out; + interface Put#(Bit#(67)) axiexp1_in; + `endif + endinterface + interface Ifc_slow_peripherals; + interface AXI4_Slave_IFC#(`PADDR,`Reg_width,`USERSPACE) axi_slave; + interface SP_ios slow_ios; + method Action external_int(Bit#(32) in); + `ifdef CLINT + method Bit#(1) msip_int; + method Bit#(1) mtip_int; + method Bit#(`Reg_width) mtime; + `endif + `ifdef PLIC method ActionValue#(Tuple2#(Bool,Bool)) intrpt_note; `endif + `ifdef I2C0 method Bit#(1) i2c0_isint; `endif + `ifdef I2C1 method Bit#(1) i2c1_isint; `endif + `ifdef QSPI0 method Bit#(1) qspi0_isint; `endif + `ifdef QSPI1 method Bit#(1) qspi1_isint; `endif + `ifdef UART0 method Bit#(1) uart0_intr; `endif + // NEEL EDIT + interface IOCellSide iocell_side; // mandatory interface + interface GPIO_config#(3) pad_configa; // depends on the number of banks + // NEEL EDIT OVER + endinterface + /*================================*/ + + function Tuple2#(Bool, Bit#(TLog#(Num_Slow_Slaves))) fn_address_mapping (Bit#(`PADDR) addr); + `ifdef UART0 + if(addr>=`UART0Base && addr<=`UART0End) + return tuple2(True,fromInteger(valueOf(Uart0_slave_num))); + else + `endif + `ifdef UART1 + if(addr>=`UART1Base && addr<=`UART1End) + return tuple2(True,fromInteger(valueOf(Uart1_slave_num))); + else + `endif + `ifdef CLINT + if(addr>=`ClintBase && addr<=`ClintEnd) + return tuple2(True,fromInteger(valueOf(CLINT_slave_num))); + else + `endif + `ifdef PLIC + if(addr>=`PLICBase && addr<=`PLICEnd) + return tuple2(True,fromInteger(valueOf(Plic_slave_num))); + else + `endif + `ifdef I2C0 + if(addr>=`I2C0Base && addr<=`I2C0End) + return tuple2(True,fromInteger(valueOf(I2c0_slave_num))); + else + `endif + `ifdef I2C1 + if(addr>=`I2C1Base && addr<=`I2C1End) + return tuple2(True,fromInteger(valueOf(I2c1_slave_num))); + else + `endif + `ifdef QSPI0 + if(addr>=`QSPI0CfgBase && addr<=`QSPI0CfgEnd) + return tuple2(True,fromInteger(valueOf(Qspi0_slave_num))); + else if(addr>=`QSPI0MemBase && addr<=`QSPI0MemEnd) + return tuple2(True,fromInteger(valueOf(Qspi0_slave_num))); + else + `endif + `ifdef QSPI1 + if(addr>=`QSPI1CfgBase && addr<=`QSPI1CfgEnd) + return tuple2(True,fromInteger(valueOf(Qspi1_slave_num))); + else if(addr>=`QSPI1MemBase && addr<=`QSPI1MemEnd) + return tuple2(True,fromInteger(valueOf(Qspi1_slave_num))); + else + `endif + `ifdef AXIEXP + if(addr>=`AxiExp1Base && addr<=`AxiExp1End) + return tuple2(True,fromInteger(valueOf(AxiExp1_slave_num))); + else + `endif + `ifdef PWM_AXI4Lite + if(addr>=`PWMBase && addr<=`PWMEnd) + return tuple2(True,fromInteger(valueOf(Pwm_slave_num))); + else + `endif + + // NEEL EDIT + // give slave number and adress map to whatever peripherals you instantiate on the AXI4_Lite + // slave. + // NEEL EDIT OVER + return tuple2(False,?); + endfunction + + (*synthesize*) + module mkslow_peripherals#(Clock fast_clock, Reset fast_reset, Clock uart_clock, Reset uart_reset + `ifdef PWM_AXI4Lite ,Clock ext_pwm_clock `endif )(Ifc_slow_peripherals); + Clock sp_clock <-exposeCurrentClock; // slow peripheral clock + Reset sp_reset <-exposeCurrentReset; // slow peripheral reset + + /*======= Module declarations for each peripheral =======*/ + `ifdef UART0 + Uart16550_AXI4_Lite_Ifc uart0 <- mkUart16550(clocked_by uart_clock, reset_by uart_reset, sp_clock, sp_reset); + `endif + `ifdef UART1 + //Ifc_Uart_bs uart1 <- mkUart_bs(clocked_by uart_clock, reset_by uart_reset,sp_clock, sp_reset); + Ifc_Uart_bs uart1 <- mkUart_bs(clocked_by sp_clock, reset_by sp_reset,sp_clock, sp_reset); + `endif + `ifdef CLINT + Ifc_clint clint <- mkclint(); + `endif + `ifdef PLIC + Ifc_PLIC_AXI plic <- mkplicperipheral(); + Wire#(Bit#(TLog#(`INTERRUPT_PINS))) interrupt_id <- mkWire(); + Vector#(32, FIFO#(bit)) ff_gateway_queue <- replicateM(mkFIFO); + `endif + `ifdef I2C0 + I2C_IFC i2c0 <- mkI2CController(); + `endif + `ifdef I2C1 + I2C_IFC i2c1 <- mkI2CController(); + `endif + `ifdef QSPI0 + Ifc_qspi qspi0 <- mkqspi(); + `endif + `ifdef QSPI1 + Ifc_qspi qspi1 <- mkqspi(); + `endif + `ifdef AXIEXP + Ifc_AxiExpansion axiexp1 <- mkAxiExpansion(); + `endif + `ifdef PWM_AXI4Lite + Ifc_PWM_bus pwm_bus <- mkPWM_bus(ext_pwm_clock); + `endif + // NEEL EDIT + Ifc_pinmux pinmux <- mkpinmux; // mandatory + MUX#(3) muxa <- mkmux(); // mandatory. number depends on the number of instances required. + GPIO#(3) gpioa <- mkgpio(); // optional. depends the number of IO pins declared before. + Wire#(Bit#(32)) wr_interrupt <- mkWire(); + // NEEL EDIT OVER + /*=======================================================*/ + + AXI4_Lite_Fabric_IFC #(1, Num_Slow_Slaves, `PADDR, `Reg_width,`USERSPACE) slow_fabric <- + mkAXI4_Lite_Fabric(fn_address_mapping); + Ifc_AXI4Lite_AXI4_Bridge bridge <-mkAXI4Lite_AXI4_Bridge(fast_clock,fast_reset); + + mkConnection (bridge.axi4_lite_master, slow_fabric.v_from_masters [0]); + /*======= Slave connections to AXI4Lite fabric =========*/ + `ifdef UART0 + mkConnection (slow_fabric.v_to_slaves [fromInteger(valueOf(Uart0_slave_num))], + uart0.slave_axi_uart); + `endif + `ifdef UART1 + mkConnection (slow_fabric.v_to_slaves [fromInteger(valueOf(Uart1_slave_num))], + uart1.slave_axi_uart); + `endif + `ifdef CLINT + mkConnection (slow_fabric.v_to_slaves [fromInteger(valueOf(CLINT_slave_num))], + clint.axi4_slave); + `endif + `ifdef PLIC + mkConnection (slow_fabric.v_to_slaves [fromInteger(valueOf(Plic_slave_num))], + plic.axi4_slave_plic); // + `endif + `ifdef I2C0 + mkConnection (slow_fabric.v_to_slaves [fromInteger(valueOf(I2c0_slave_num))], + i2c0.slave_i2c_axi); + `endif + `ifdef I2C1 + mkConnection (slow_fabric.v_to_slaves [fromInteger(valueOf(I2c1_slave_num))], + i2c1.slave_i2c_axi); // + `endif + `ifdef QSPI0 + mkConnection (slow_fabric.v_to_slaves [fromInteger(valueOf(Qspi0_slave_num))], + qspi0.slave); + `endif + `ifdef QSPI1 + mkConnection (slow_fabric.v_to_slaves [fromInteger(valueOf(Qspi1_slave_num))], + qspi1.slave); + `endif + `ifdef AXIEXP + mkConnection (slow_fabric.v_to_slaves [fromInteger(valueOf(AxiExp1_slave_num))], + axiexp1.axi_slave); // + `endif + `ifdef PWM_AXI4Lite + mkConnection (slow_fabric.v_to_slaves [fromInteger(valueOf(Pwm_slave_num))], + pwm_bus.axi4_slave); + `endif + + // NEEL EDIT + mkConnection (slow_fabric. + v_to_slaves[fromInteger(valueOf(Muxa_slave_num))], + muxa.axi_slave); + mkConnection (slow_fabric. + v_to_slaves[fromInteger(valueOf(Gpioa_slave_num))], + gpioa.axi_slave); + rule connect_select_lines_pinmux;// mandatory + pinmux.mux_lines.cell0_mux(muxa.mux_config.mux[0]); + pinmux.mux_lines.cell1_mux(muxa.mux_config.mux[1]); + pinmux.mux_lines.cell2_mux(muxa.mux_config.mux[2]); + endrule + rule connect_i2c0_scl; + pinmux.peripheral_side.twi_scl_out(i2c0.out.scl_out); + pinmux.peripheral_side.twi_scl_outen(pack(i2c0.out.scl_out_en)); + endrule + rule connect_i2c0_scl_in; + i2c0.out.scl_in(pinmux.peripheral_side.twi_scl_in); + endrule + rule connect_i2c0_sda; + pinmux.peripheral_side.twi_sda_out(i2c0.out.sda_out); + pinmux.peripheral_side.twi_sda_outen(pack(i2c0.out.sda_out_en)); + endrule + rule connect_i2c0_sda_in; + i2c0.out.sda_in(pinmux.peripheral_side.twi_sda_in); + endrule + rule connect_uart1tx; + pinmux.peripheral_side.uart_tx(uart1.coe_rs232.sout); + endrule + rule connect_uart1rx; + uart1.coe_rs232.sin(pinmux.peripheral_side.uart_rx); + endrule + rule connect_gpioa; + pinmux.peripheral_side.gpioa_a0_out(gpioa.func.gpio_out[0]); + pinmux.peripheral_side.gpioa_a0_outen(gpioa.func.gpio_out_en[0]); + pinmux.peripheral_side.gpioa_a1_out(gpioa.func.gpio_out[1]); + pinmux.peripheral_side.gpioa_a1_outen(gpioa.func.gpio_out_en[1]); + pinmux.peripheral_side.gpioa_a2_out(gpioa.func.gpio_out[2]); + pinmux.peripheral_side.gpioa_a2_outen(gpioa.func.gpio_out_en[2]); + Vector#(3,Bit#(1)) temp; + temp[0]=pinmux.peripheral_side.gpioa_a0_in; + temp[1]=pinmux.peripheral_side.gpioa_a1_in; + temp[2]=pinmux.peripheral_side.gpioa_a2_in; + gpioa.func.gpio_in(temp); + endrule + for(Integer i=0;i<32;i=i+ 1)begin + rule connect_int_to_plic(wr_interrupt[i]==1); + ff_gateway_queue[i].enq(1); + plic.ifc_external_irq[i].irq_frm_gateway(True); + endrule + end + rule rl_completion_msg_from_plic; + let id <- plic.intrpt_completion; + interrupt_id <= id; + `ifdef verbose $display("Dequeing the FIFO -- PLIC Interrupt Serviced id: %d",id); `endif + endrule + + for(Integer i=0; i <32; i=i+1) begin + rule deq_gateway_queue; + if(interrupt_id==fromInteger(i)) begin + ff_gateway_queue[i].deq; + `ifdef $display($time,"Dequeing the Interrupt request for ID: %d",i); `endif + end + endrule + end + /* for connectin inputs from pinmux as itnerrupts + rule connect_pinmux_eint; + wr_interrupt<= pinmux.peripheral_side.eint_input; + endrule + */ + // NEEL EDIT OVER + /*=======================================================*/ + /*=================== PLIC Connections ==================== */ + `ifdef PLIC_main + /*TODO DMA interrupt need to be connected to the plic + for(Integer i=1; i<8; i=i+1) begin + `ifdef DMA + rule rl_connect_dma_interrupts_to_plic; + if(dma.interrupt_to_processor[i-1]==1'b1) begin + ff_gateway_queue[i].enq(1); + plic.ifc_external_irq[i].irq_frm_gateway(True); + end + endrule + `else + rule rl_connect_dma_interrupts_to_plic; + ff_gateway_queue[i].enq(0); + endrule + `endif + end + */ + rule rl_connect_i2c0_to_plic; + `ifdef I2C0 + if(i2c0.isint()==1'b1) begin + ff_gateway_queue[8].enq(1); + plic.ifc_external_irq[8].irq_frm_gateway(True); + end + `else + ff_gateway_queue[8].enq(0); + `endif + endrule + + rule rl_connect_i2c1_to_plic; + `ifdef I2C1 + if(i2c1.isint()==1'b1) begin + ff_gateway_queue[9].enq(1); + plic.ifc_external_irq[9].irq_frm_gateway(True); + end + `else + ff_gateway_queue[9].enq(0); + `endif + endrule + + rule rl_connect_i2c0_timerint_to_plic; + `ifdef I2C0 + if(i2c0.timerint()==1'b1) begin + ff_gateway_queue[10].enq(1); + plic.ifc_external_irq[10].irq_frm_gateway(True); + end + `else + ff_gateway_queue[10].enq(0); + `endif + endrule + + rule rl_connect_i2c1_timerint_to_plic; + `ifdef I2C1 + if(i2c1.timerint()==1'b1) begin + ff_gateway_queue[11].enq(1); + plic.ifc_external_irq[11].irq_frm_gateway(True); + end + `else + ff_gateway_queue[11].enq(0); + `endif + endrule + + rule rl_connect_i2c0_isber_to_plic; + `ifdef I2C0 + if(i2c0.isber()==1'b1) begin + ff_gateway_queue[12].enq(1); + plic.ifc_external_irq[12].irq_frm_gateway(True); + end + `else + ff_gateway_queue[12].enq(0); + `endif + endrule + + rule rl_connect_i2c1_isber_to_plic; + `ifdef I2C1 + if(i2c1.isber()==1'b1) begin + ff_gateway_queue[13].enq(1); + plic.ifc_external_irq[13].irq_frm_gateway(True); + end + `else + ff_gateway_queue[13].enq(0); + `endif + endrule + + for(Integer i = 14; i < 20; i=i+1) begin + rule rl_connect_qspi0_to_plic; + `ifdef QSPI0 + if(qspi0.interrupts()[i-14]==1'b1) begin + ff_gateway_queue[i].enq(1); + plic.ifc_external_irq[i].irq_frm_gateway(True); + end + `else + ff_gateway_queue[i].enq(0); + `endif + endrule + end + + for(Integer i = 20; i<26; i=i+1) begin + rule rl_connect_qspi1_to_plic; + `ifdef QSPI1 + if(qspi1.interrupts()[i-20]==1'b1) begin + ff_gateway_queue[i].enq(1); + plic.ifc_external_irq[i].irq_frm_gateway(True); + end + `else + ff_gateway_queue[i].enq(0); + `endif + endrule + end + + `ifdef UART0 + SyncBitIfc#(Bit#(1)) uart0_interrupt <-mkSyncBitToCC(uart_clock,uart_reset); + rule synchronize_the_uart0_interrupt; + uart0_interrupt.send(uart0.irq); + endrule + `endif + rule rl_connect_uart_to_plic; + `ifdef UART0 + if(uart0_interrupt.read==1'b1) begin + ff_gateway_queue[27].enq(1); + plic.ifc_external_irq[27].irq_frm_gateway(True); + end + + `else + ff_gateway_queue[27].enq(0); + `endif + endrule + + for(Integer i = 28; i<`INTERRUPT_PINS; i=i+1) begin + rule rl_raise_interrupts; + if((i-28)<`IONum) begin //Peripheral interrupts + if(gpio.to_plic[i-28]==1'b1) begin + plic.ifc_external_irq[i].irq_frm_gateway(True); + ff_gateway_queue[i].enq(1); + end + end + endrule + end + + rule rl_completion_msg_from_plic; + let id <- plic.intrpt_completion; + interrupt_id <= id; + `ifdef verbose $display("Dequeing the FIFO -- PLIC Interrupt Serviced id: %d",id); `endif + endrule + + for(Integer i=0; i <`INTERRUPT_PINS; i=i+1) begin + rule deq_gateway_queue; + if(interrupt_id==fromInteger(i)) begin + ff_gateway_queue[i].deq; + `ifdef $display($time,"Dequeing the Interrupt request for ID: %d",i); `endif + end + endrule + end + + + `endif + /*======================================================= */ + + /* ===== interface definition =======*/ + interface axi_slave=bridge.axi_slave; + `ifdef PLIC method intrpt_note = plic.intrpt_note; `endif + `ifdef CLINT + method msip_int=clint.msip_int; + method mtip_int=clint.mtip_int; + method mtime=clint.mtime; + `endif + `ifdef I2C0 + method i2c0_isint=i2c0.isint; + `endif + `ifdef I2C1 + method i2c1_isint=i2c1.isint; + `endif + `ifdef QSPI0 method qspi0_isint=qspi0.interrupts[5]; `endif + `ifdef QSPI1 method qspi1_isint=qspi1.interrupts[5]; `endif + `ifdef UART0 method uart0_intr=uart0.irq; `endif + interface SP_ios slow_ios; + `ifdef UART0 + interface uart0_coe=uart0.coe_rs232; + `endif + `ifdef UART1 + interface uart1_coe=uart1.coe_rs232; + `endif + `ifdef I2C0 + interface i2c0_out=i2c0.out; + `endif + `ifdef I2C1 + interface i2c1_out=i2c1.out; + `endif + `ifdef QSPI0 + interface qspi0_out = qspi0.out; + `endif + `ifdef QSPI1 + interface qspi1_out = qspi1.out; + `endif + `ifdef AXIEXP + interface axiexp1_out=axiexp1.slave_out; + interface axiexp1_in=axiexp1.slave_in; + `endif + `ifdef PWM_AXI4Lite + interface pwm_o = pwm_bus.pwm_io; + `endif + endinterface + // NEEL EDIT + interface iocell_side=pinmux.iocell_side; + interface pad_configa= gpioa.pad_config; + method Action external_int(Bit#(32) in); + wr_interrupt<= in; + endmethod + // NEEL EDIT OVER + /*===================================*/ + endmodule +endpackage diff --git a/src/bsv/peripheral_gen.py b/src/bsv/peripheral_gen.py new file mode 100644 index 0000000..94e1274 --- /dev/null +++ b/src/bsv/peripheral_gen.py @@ -0,0 +1,43 @@ +class PBase(object): + pass + +class UART(PBase): + def importfn(self): + return " import Uart16550 :: *;" + + def ifacedecl(self): + return " interface RS232_PHY_Ifc uart{0}_coe;" + + +class RS232(PBase): + def importfn(self): + return " import Uart_bs::*;\n" \ + " import RS232_modified::*;" + + def ifacedecl(self): + return " interface RS232 uart{0}_coe;" + + +class spi(PBase): + def importfn(self): + return " import I2C_top :: *;" + + def ifacedecl(self): + return " interface I2C_out i2c{0}_out;" + + +class qspi(PBase): + def importfn(self): + return " import qspi :: *;" + + def ifacedecl(self): + return " interface QSPI_out qspi{0}_out;" + + +class pwm(PBase): + def importfn(self): + return " interface PWMIO pwm_o;" + + def ifacedecl(self): + return " import pwm::*;" +