package/perl: bump to version 5.30.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibc: install glibc utils to target

With this patch we introduce an option for glibc, which
installs getconf, ldconfig and ldd utilities on target, that
may be useful in debugging. By default these utilities are
built, but not installed to the target.
ldd is a bash script, so it has bash dependency.

Signed-off-by: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

support/testing: add lxc test

The test starts a simple container with an iperf3 server.
The container is using the tini init system, with a shared rootfs.
An iperf3 client is started from the host to check that the container
is really up and running.

Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: add assertRunOk method to BRTest class

This method asserts that the given command ran successfully.
The goal is for it to be used by the different tests when needed.

Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linuxconsoletools: bump version to 1.7.0

This version changed the (optional) dependency from sdl and
sdl-config to sdl2 and pkg-config. Therefore, the patch
0002-sdl-config.patch has been dropped and the dependency
has been changed to BR2_PACKAGE_SDL2.

Since SDL2 (required to build force-feedback utilities)
requires shared library support to compile, a dependency
on !BR2_STATIC_LIBS was added to the configuration option
that enables force-feedback utilities.

Signed-off-by: Koen Martens <gmc@sonologic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: bump CIP kernel to version 4.19.82-cip14

This patch bumps Linux CIP version to 4.19.82-cip14.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: change CIP kernel download method

Downloading from https a tarball is faster than cloning a git repo.
If needed, BR2_LINUX_KERNEL_CUSTOM_GIT can be used as a fallback
mechanism to downlad the CIP kernel with git.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/raspi-gpio: new package

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
[Thomas: fix typo in Config.in, disable installation to staging, both
were noticed by Yann E. Morin]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-bunch: add to package/Config.in

This was missing from commit 8f15dd35ef659cffa6e6d25cde38c9a0248f2b5f.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-bunch: new package

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: add missing entry to DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/umtprd: new package

uMTP-Responder is a lightweight USB Media Transfer Protocol (MTP)
responder daemon for GNU/Linux.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[Thomas: license is GPL-3.0+]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/spice: disable tests

By disabling tests, we'll remove the optional gdk-pixbuf dependency

Fixes:
 - http://autobuild.buildroot.org/results/96c786f85d35f33508e9c71778043d16b87f72cd

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-hiredis: bump to 1.0.1

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rng-tools: needs autoreconf

Commit b6606937d861cc4de60e40baec1cb6cdb61b2aab wrongly removed
RNG_TOOLS_AUTORECONF=YES

Fixes:
 - http://autobuild.buildroot.org/results/a0a4631cc0252579b675a0c401a99239d0b97392

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dtc: fix license hashes

Update hash of license files and add BSD-2-Clause file, see
https://git.kernel.org/pub/scm/utils/dtc/dtc.git/commit/?id=25bb080c18d1a8a96760e26257bf8c80ec7fcab4
https://git.kernel.org/pub/scm/utils/dtc/dtc.git/commit/?id=702c1b6c0e73d2bcf24f0b8398aca6a940863e48

Fixes:
 - http://autobuild.buildroot.org/results/d3db8ddc096f09bb1728a0ba40b925fbf49c424b
 - http://autobuild.buildroot.org/results/799bddc1467413b1f202a8803e902c797f4f9c92

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ae0dabd8620cc5fb345096beecef681d19699cd4)
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/protobuf: bump to 3.10.1

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/uboot-tools: bump to 2019.10

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-txdbus: bump to 1.1.1

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-tinyrpc: bump to 1.0.4

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libcurl: bump to 7.67.0

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/git: bump to 2.24.0

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rng-tools: bump to 6.8

Dropped autoreconf and non-standard pthread yield patches as they merged
upstream.

[Peter: really drop autoreconf]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/irqbalance: bump to version 1.6.0

See full changelog https://github.com/Irqbalance/irqbalance/releases/tag/v1.6.0

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5/qt5base: add support for gcnano-binaries

Signed-off-by: Jens Kleintje <scooby22@web.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcnano-binaries: new package

New package which provides the driver and binary blob libraries for
the STM32MP157 vivante gcnano gpu. The precompiled libraries depend
on wayland and libdrm.

Signed-off-by: Jens Kleintje <scooby22@web.de>
[Thomas:
 - add missing dependency on glibc
 - add missing dependencies on threads (wayland, libdrm) and !static
   (wayland)
 - introduce GCNANO_BINARIES_LIB_VERSION,
   GCNANO_BINARIES_DRIVER_VERSION and GCNANO_BINARIES_USERLAND_VERSION
   variables to simplify code a bit
 - greatly simplify the installation, by using more the available
   libraries/files. This also avoids the installation of duplicate
   release/debug libraries]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xtables-addons: bump to 3.5

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dtc: bump version to 1.5.1

Updated patch 1 to handle changed context.
Removed patch 2 which is now upstream.

The update allows QEMU's configure script to successfully detect libfdt.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qemu: search for host-dtc (libfdt) headers at the right place

The libfdt headers are installed at $(HOST_DIR)/include/libfdt now, to
prevent conflicts with the kernel dtc code. Pass that path to the qemu
configure script, otherwise it uses its bundled copy of libfdt.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dtc: install host libfdt headers in a subdirectory

Installing the libfdt headers at $(HOST_DIR)/include interferes with the
build of the kernel, as in beaglebone:

2019-11-01T22:23:16 /usr/bin/make -f ./scripts/Makefile.build obj=scripts
2019-11-01T22:23:16 /usr/bin/make -f ./scripts/Makefile.build obj=scripts/dtc need-builtin=
2019-11-01T22:23:16 (cat /dev/null; ) > scripts/dtc/modules.order
2019-11-01T22:23:16 /usr/bin/gcc -O2 -I/work/beaglebone/host/include -L/work/beaglebone/host/lib -Wl,-rpath,/work/beaglebone/host/lib -Wp,-MD,scripts/dtc/libfdt/.fdt_ro.o.d -Wall -Wmissing-prototypes -Wstrict-p>
2019-11-01T22:23:16 scripts/dtc/libfdt/fdt_ro.c:92:10: error: redefinition of ‘fdt_get_max_phandle’
2019-11-01T22:23:16 uint32_t fdt_get_max_phandle(const void *fdt)
2019-11-01T22:23:16 ^~~~~~~~~~~~~~~~~~~
2019-11-01T22:23:16 In file included from scripts/dtc/libfdt/fdt_ro.c:54:
2019-11-01T22:23:16 /work/beaglebone/host/include/libfdt.h:384:24: note: previous definition of ‘fdt_get_max_phandle’ was here
2019-11-01T22:23:16 static inline uint32_t fdt_get_max_phandle(const void *fdt)
2019-11-01T22:23:16 ^~~~~~~~~~~~~~~~~~~
2019-11-01T22:23:16 make[4]: *** [scripts/Makefile.host:107: scripts/dtc/libfdt/fdt_ro.o] Error 1
2019-11-01T22:23:16 make[3]: *** [scripts/Makefile.build:544: scripts/dtc] Error 2
2019-11-01T22:23:16 make[2]: *** [Makefile:1066: scripts] Error 2
2019-11-01T22:23:16 make[1]: *** [package/pkg-generic.mk:241: /work/beaglebone/build/linux-4dae378bbe721277b08699d1d88ffae12acc9b09/.stamp_built] Error 2

We cannot simply disable dtc support and patching the kernel makefiles
is risky and error-prone, so let's just install the host-dtc headers at
$(HOST_DIR)/include/libfdt to circumvent the problem.

Packages that depend on those headers (e.g. host-qemu) must be updated
to user the correct path but this is small change.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sdbusplus: fix check-package warnings

Fixes:

package/sdbusplus/Config.in.host:7: help text: <tab><2 spaces><62 chars> (http://nightly.buildroot.org/#writing-rules-config-in)
package/sdbusplus/sdbusplus.mk:26: expected indent with tabs

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/arm-trusted-firmware: add pattern based image copy for ATF

This adds support for different platforms where the binaries have
different extensions.

Signed-off-by: Michael Schenk <michael.schenk@noser.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/atmel: bump to linux4sam_6.2 and at91bootstrap 3.9.0

Update configs with latest linux4sam and at91bootstrap.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/postgresql: bump version to 12.1

Release notes of the bugfix release:
https://www.postgresql.org/about/news/1994/
https://www.postgresql.org/docs/current/release-12-1.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-huepy: fix build with python3.8

Fixes:
  - http://autobuild.buildroot.net/results/240c397a6479b98f30b63b5135bfb2e45281de7d

Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/shadowsocks-libev: bump version to 3.3.3

Signed-off-by: Min Xu <xuminready@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/beaglebone: bump kernel version to 4.19.79-ti-r30

Use the github macro instead of git, to save download time.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sdbusplus: new package

A C++ library for interacting with sd-bus and a C++ bindings generator.

The host build produces a code generation tool, sdbus++ while the
target build gives libsdbusplus.

The code generator requires host-python-pyyaml, host-python-inflection,
and host-python-mako. Since it isn't built for the target, the target
build does not require them.

The host package includes a code and documentation generation program,
which is useful for including in a buildroot SDK, even if no target
package needs it, so make it a user-selectable host package.

host-autoconf-archive is added as a dependency since configure.ac
uses the AX_PKG_CHECK_MODULES macro.

Signed-off-by: John Faith <jfaith@impinj.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
[Thomas: use host-python3 when BR2_PACKAGE_PYTHON3=y]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rcw: add option to generate the RCW

When the rcw tools is built, it is probably to generate the RCW (Reset
Configuration Word) of the target. So it makes sense to do this directly
in the Buildroot infra and install it in the images directory, just like
we do for e.g. device tree blobs.

Add an option BR2_PACKAGE_HOST_RCW_CUSTOM_PATH that allows to specify
the source for the RCW. And while we're at it, make it possible to
specify multiple .rcw and .rcwi files, just like for device trees.

Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
[Arnout:
  * Reword help text and commit message
  * Remove definition of RCW_DELIVERY_FILE
  * Define and use RCW_FILES
  * Enclose everything in ifneq($(RCW_FILES),)
  * Enclose error in ifeq($(BR_BUILDING),y)
  * Add actual error message
  * Don't limit to only %.rcwi files
  * Don't delete *.bin
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/pc_x86_64_efi: use genimage GPT partition table support

Thanks to the introduction of GPT partition table support in genimage,
this commit improves the pc_x86_64_efi_defconfig to remove the use of
the custom script creating the image.

Tested in QEMU, not on a physical device.

So:
- revert commit fee29b05bb7db25e37c8a5175ce00dc712554edf[1]
- add GPT support
- tweak shell script to add the correct UUID in genimage config.

[1]: https://git.buildroot.net/buildroot/commit/?id=fee29b05bb7db25e37c8a5175ce00dc712554edf
[2]: https://git.buildroot.net/buildroot/commit/?id=79b8540d624ac4846ba341b1b9691eccacf0bc05

Signed-off-by: Alexandre PAYEN <alexandre.payen@smile.fr>
Cc: Carlos Santos <casantos@datacom.com.br>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Thomas:
 - drop commented code in post-build.sh
 - take into account comments made by Carlos Santos in
   http://patchwork.ozlabs.org/patch/1143502/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/paho-mqtt-cpp: bump version to 1.1

Signed-off-by: Refik Tuzakli <tuzakli.refik@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch/Config.in.arc: introduce the ARC optimized hs38 variant

This corresponds to -mcu=hs38 with mpy-option=9 (64-bit multiplier)

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/stm32flash: bump to revision 3cebf12

This includes the following changes:

3cebf12 dev_table: add STM32G07xxx/08xxx
5ad1f87 Makefile: Check if CC and AR are defined
ee5b009 Fix comparison between signed and unsigned integer
74bfe1a serial_w32: remove always false if-then
d302abf Add comment on switch fall-through
12f06e3 Fix warning for unused parameters with mingw-gcc
4957909 Fix compile warning for unused parameters
475da89 Fix signed/unsigned comparison
68cc278 Fix dev_table for Android compilation
2e09c51 Fix indentation warning from GCC 7.1.1
c4293d3 Flip PEMPTY bit before SW reset on STM32L452
acf15a2 dev_table: add device STM32L01xxx/02xxx
59d08c2 dev_table: add device family H7
12bfd33 dev_table: fix flash layout of STM32F72xxx/73xxx
0c84669 dev_table: add STM32L45xxx/46xxx
e2a4f65 dev_table: fix option byte end address for STM32L43xxx/44xxx
76da7c4 dev_table: L4: reorder with AN2606 rev 31
cc70634 dev_table: F0: reorder with AN2606 rev 31
8a0d423 dev_table: F4: reorder and align names with AN2606 rev 31
bc0876d dev_table: fix RAM size for STM32F412xx
2783493 Add some more F4/F7/L4 devices
27626f5 Add autotools support
6b6b6e5 Let user decide length for unknown memory areas
671561e Allow read/write to full option byte area and system memory
843c6f5 Don't write diagnostics messages to stdout unconditionally
3a07489 Don't always print banner to stdout
cc97bca Treat filenames starting with hyphen correctly
a1b2fe4 Improve validation of GPIO sequence
7683db8 Allow specifying more than 255 pages to erase
033aaa8 Report RAM and flash size as maximal values
1f10b4e Serial POSIX: Check if tty is already opened by another stm32flash
8aa685c Add ctrl-C signal handler
3daa90e Print message on failing read/write protect/unprotect
7b5b33a Verbose error message on GPIO signal change failure
d5df420 Add message and fix return code on failed boot entry sequence
a285a09 Flush port after boot GPIO sequence
ee7c963 Fix return code from GPIO bootloader exit sequence
de7332e Fix return code from GPIO bootloader entry sequence
efeab97 Allow extra delay or no delay at all in GPIO sequences
d202bd0 Make termios timeout settable via TERMIOS_TIMEOUT_MS define
0242da6 Ensure correct precedence of bit and logic comparisons
26854ef Fix return value in case of successful protect/unprotect operation
3772e95 Fix return code in case of flash failure
7a7b4c9 Always run GPIO exit sequence if present
d581ce8 Put Linux specific GPIO code under conditional compile
8c4aa65 dev_table: Mark 0x417, 0x429, 0x427 for no mass-erase
2381ce3 Fix parity setting/checking on *BSD and MacOSX
5361ed8 Fix for device 0x442: System memory start address

Also add hash for license file

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-future: new package

Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-huepy: new package

Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-dnspython: new package

Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/orangepi_lite: bump kernel and u-boot versions

Bump Linux to 5.3.8 and U-Boot to 2019.10.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Tested-by: Jan Kraval <jan.kraval@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/orangepi_pc_plus: bump kernel and u-boot versions

Bump Linux to 5.3.8 and U-Boot to 2019.10.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/orangepi_pc: bump kernel and u-boot versions

Bump Linux to 5.3.8 and U-Boot to 2019.10.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/orangepi_zero_plus2: bump kernel and u-boot versions

Bump Linux to 5.3.8 and U-Boot to 2019.10.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/orangepi_zero: bump kernel and u-boot versions

Bump Linux to 5.3.8 and U-Boot to 2019.10.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/linksprite_pcduino: bump kernel and u-boot versions

Bump Linux to 5.3.8 and U-Boot to 2019.10.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/orangepi-one: bump kernel and u-boot versions

Bump Linux to 5.3.8 and U-Boot to 2019.10.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rtl8189fs: bump revision to 54bd6808

Out-of-tree driver has been updated to work with Linux kernels v5.x.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Tested-by: Jan Kraval <jan.kraval@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xr819-xradio: bump version to aa01ba77

Out-of-tree driver has been updated to work with Linux kernels v5.x.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/php: add option to enable libsodium support

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ffmpeg: enable ARC glibc builds

ARC glibc fenv.h has the needed macros for quite some time now so
allow ffmpeg builds.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/raspberrypi3_64_defconfig: use pi3-miniuart-bt device tree overlay

Use the pi3-miniuart-bt device tree overlay (as the 32bit raspberrypi3
defconfig) instead of the enable_uart option.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/raspberrypi3_64_defconfig: enable device tree overlay support

Enables the usage of the standard Raspberry Pi overlays (as already
possible for all 32bit defconfigs and as expected by most Raspberry Pi
defconfig users), follow up patch will use the overlay feature to
enable the ttyS0 serial console in the same way as done for the
raspberrypi3_defconfig case (instead using an alternative approach).

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rpi-userland: bump version to 5070cb7f

- rebased 0003-Disable-Werror-everywhere.patch
- remove vcfiled support (upstream removed, see [1])

[1] https://github.com/raspberrypi/userland/commit/f00a1189b9f8246dc24c45985de599c50b8c62a5

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/beaglebone: use the new BeagleBoard/BeagleBone kernel repository

The original source URL (http://beagleboard.org/source) now redirects to
https://elinux.org/Beagleboard:BeagleBoneBlack_Rebuilding_Software_Image
which points to an official kernel repository at GitHub.

There are updated RT and non-RT kernel source trees. Use the last non-RT
release (4.19.73-ti-r29) and the omap2plus defconfig.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

utils/scanpypi: sort alphabetically list of required packages

That change will alphabetically set list order
of required packages in Config.in file automatically.

Example below:

before: ['python-pyserial', 'python-pyaes', 'python-ecdsa']
after:  ['python-ecdsa', 'python-pyaes', 'python-pyserial']

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-esptool: new package

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pyaes: new package

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rpi-firmware: bump version to 1.20190925-1

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/raspberrypi*: bump kernel version to 1.20190925-1

Now based on 4.19.75 (from 4.19.66).

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/unrar: bump to version 5.8.3

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-uvloop: bump to version 0.14.0

The package now fully supports Python 3.8, so the pre-build
hook and the dependency on host-python-cython can be removed.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-six: bump to version 1.13.0

License changed due to a copyright year bump.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/modem-manager: bump to version 1.12.0

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Reviewed-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/samba4: bump version to 4.11.2

Added patches from upstream bug tracker to fix cross-compile problems,
removed patches applied upstream and rebase remaining patches.

The dependency to gnutls is now mandatory:
https://blog.cryptomilk.org/2019/10/02/samba-and-gnutls/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/valijson: bump version to 0.2

- Added hash of LICENSE file in valijson.hash
- Updated hash of valijson tar file in valijson.hash file
- Added option to set tests off which drops the curlpp dependency

Signed-off-by: Santosh Multhalli <santosh.multhalli@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libressl: bump to version 3.0.2

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2019.11-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "package/dtc: bump to v1.5.1"

This reverts commit 1e55b66e975d234f5bff992785762e8f7ee5f5b9.

This bump breaks the build of a number of defconfigs with errors like:

HOSTCC  scripts/dtc/libfdt/fdt_ro.o
scripts/dtc/libfdt/fdt_ro.c:92:10: error: redefinition of ‘fdt_get_max_phandle’
uint32_t fdt_get_max_phandle(const void *fdt)
^~~~~~~~~~~~~~~~~~~
In file included from scripts/dtc/libfdt/fdt_ro.c:54:
/work/beaglebone/host/include/libfdt.h:384:24: note: previous definition of ‘fdt_get_max_phandle’ was here

So revert it for 2019.11.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "package/dtc: fix license hashes"

This reverts commit ae0dabd8620cc5fb345096beecef681d19699cd4.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/uvw: needs C++

Fixes:
 - http://autobuild.buildroot.org/results/01f97d793f28772cfce44f6979e39d8adff233af

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rauc: fix host build

Use --without-dbuspolicydir to fix build on host

Fixes:
 - http://autobuild.buildroot.org/results/1700950e682e48bdb99a0051af062f5db5997c6c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linux-serial-test: new package

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[yann.morin.1998@free.fr: add hash for license file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/sudo: new config to add sudo group and rule

Signed-off-by: Stephan Henningsen <stephan+buildroot@asklandd.dk>
[yann.morin.1998@free.fr:
  - drop the conditional creation
  - uid -is -'- when username is
  - leading TAB in user table, squeeze other spaces
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/freerdp: fix pulseaudio support

The name of the option to enable/disable support for pulseaudio has been
in flux in FreeRDP, soemtimes being WITH_PULSE, sometimes being the
erroneous WITH_PULSEAUDIO. Eventually, FreeRDP came to their feet, and
fixed it to WITH_PULSE everywhere.

Signed-off-by: Alexey Lukyanchuk <skif@skif-web.ru>
[yann.morin.1998@free.fr:
  - remove useless (obsolete) WITH_PULSEAUDIO
  - fix the else clause too
  - enhance commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rauc: bump to v1.2

Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Reviewed-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-web2py: fix build with python 3.8

Fixes:
 - http://autobuild.buildroot.org/results/fa515627ae888d08fc10074e8d9f6e9dbede91a7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/binutils/arc-2019.09-eng002: fix glibc build with -fPIE

In Binutils rev arc-2019.09-eng002 there is a commit 182352753240
("[ARC] Check UNDEFWEAK_NO_DYNAMIC_RELOC") which caused glibc
build error  in case of BR2_PIC_PIE=y.
This commit adds reverting this commit patch to
package/binutils/arc-2019.09-eng002

These binutils changes will be a part of the next -eng00x or RCx
ARC toolchain but now we are making this commit to get known issue fixed.

Fixes:
http://autobuild.buildroot.net/results/4bc/4bca850dbf966687bf85c2c23465be0da47b7997//

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Claudiu Zissulescu <claziss@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: document D language support

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-external: add a check for D language support

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gcc: install wrapper for GDC

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/yaffs2utils: fix upstream URL

The current URL from which we download the yaffs2utils tarball no
longer works:

-2019-11-02 10:17:20--  https://yaffs2utils.googlecode.com/files/0.2.9.tar.gz
Resolving yaffs2utils.googlecode.com (yaffs2utils.googlecode.com)... 2a00:1450:400c:c02::52, 173.194.76.82
Connecting to yaffs2utils.googlecode.com (yaffs2utils.googlecode.com)|2a00:1450:400c:c02::52|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2019-11-02 10:17:20 ERROR 404: Not Found.

So, let's replace it with a working URL.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libnftnl: bump version to 1.1.4

Removed patch after upstream committed an updated version from Baruch:
https://git.netfilter.org/libnftnl/commit/?id=78709f7b55aa8934f42aa40548dcdf65e6bfeb2c

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/s6-linux-utils: bump version to 2.5.1.1

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/s6-portable-utils: bump version to 2.2.2.1

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/s6-networking: bump version to 2.3.1.1

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/s6-dns: bump version to 2.3.1.1

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/s6-linux-init: bump version to 1.0.3.1

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/s6-rc: bump version to 0.5.1.1

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/s6: bump version to 2.9.0.1

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/execline: bump version to 2.5.3.0

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/skalibs: bump version to 2.9.1.0

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/piglit: set python executable

Without this change, piglit will detect and use python from host
resulting in build failures if python-mako, python-numpy or python-six
are not installed

Fixes:
 - http://autobuild.buildroot.org/results/8d782589b6073031626fd769982a0844f3731906

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iputils: add systemd dependency

This is needed to ensure systemd services are installed.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>