Lionel Landwerlin [Tue, 26 Nov 2019 14:20:38 +0000 (16:20 +0200)]
isl: set bpb for Y8_UNORM
This isn't a format we use in any of the drivers but for consistency
just give it a correct bpb.
We also set the luminance in the G channel. We can't actually use this
format with the 3D sampler (only media).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2999>
Eric Engestrom [Mon, 30 Mar 2020 14:30:28 +0000 (16:30 +0200)]
scons: prune unused Makefile.sources
Fixes: 2e92d3381988a85b2a6d ("scons: Prune out unnecessary targets.")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4373>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4373>
Connor Abbott [Fri, 27 Mar 2020 11:02:59 +0000 (12:02 +0100)]
tu: Return the correct alignment for images
The alignment field was never initialized, so we were just returning an
alignment of 0. Return the alignment from fdl, and while we're here
cleanup some leftovers in tu_private.h.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4357>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4357>
Connor Abbott [Fri, 27 Mar 2020 11:00:13 +0000 (12:00 +0100)]
freedreno/fdl: Add base_align
Tell users what the base address of the image needs to be aligned to.
These values are based on experimentation via passing an offset to
vkBindImageMemory with turnip and seeing if tests still pass. Note that
r8g8 is also special in this regard, however it actually has an
increased alignment (in bytes).
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4357>
Jason Ekstrand [Thu, 26 Mar 2020 17:57:36 +0000 (12:57 -0500)]
anv/allocator: Use util_dynarray for blocks in anv_state_stream
When we originally wrote a bunch of the allocation data structures, we
re-used the GPU memory for CPU-side data structures. It's a bit more
memory efficient and usually ok. However, this has a couple of
problems:
1. It makes it MUCH more likely that the GPU will accidentlly stomp
CPU-side data structures and cause nearly impossible to debug
crashes.
2. With discrete GPUs, the memory will be mapped somehow and that map
may be across the BAR so it could have horribly slow CPU access.
This is bad for our CPU-side data structures.
In the case of anv_state_stream, it also made the data structure
massively more complex than it needed to be.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4336>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4336>
Jason Ekstrand [Thu, 26 Mar 2020 17:22:48 +0000 (12:22 -0500)]
anv: Account for the header in anv_state_stream_alloc
If we have an allocation that's exactly the block size, we end up
computing a new block size to allocate that's exactly the block size,
add in the header, and then assert fail. When computing the block size,
we need to account for the header.
Fixes: 955127db937 "anv/allocator: Add support for large stream..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4336>
Marek Olšák [Fri, 27 Mar 2020 12:20:51 +0000 (08:20 -0400)]
st/mesa: add environment variable pin_app_thread for faster glthread on AMD Zen
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4369>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4369>
Marek Olšák [Sun, 22 Mar 2020 18:07:03 +0000 (14:07 -0400)]
gallium/u_threaded: call the driver to pin threads to L3 immediately
This is thread-safe and we want it to be done immediately for good L3 cache
usage.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4369>
Qiang Yu [Mon, 30 Mar 2020 02:54:08 +0000 (10:54 +0800)]
lima: also check tiled and depth case when import
We missed the tiled and depth case when check buffer alignment.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4362>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4362>
Qiang Yu [Sat, 28 Mar 2020 06:09:22 +0000 (14:09 +0800)]
lima: fix buffer import with offset
With EGL_EXT_image_dma_buf_import, user can import dma_buf
with offset.
This is also used by AOSP GLConsumer::updateTexImage
with HAL_PIXEL_FORMAT_YV12 buffer which store YUV planes in
the same buffer with offset. Render sample from it using
GL_OES_EGL_image_external. This should fix some video
display problem when using MediaCodec soft decoding which
generates HAL_PIXEL_FORMAT_YV12 buffer and render it on
screen.
Test program:
https://github.com/yuq/gfx/tree/master/yuv2rgb/dma-buf
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4362>
Alyssa Rosenzweig [Tue, 31 Mar 2020 00:54:51 +0000 (20:54 -0400)]
pan/bi: Fix handling of constants with COMBINE
We should never see COMBINE constants explicitly since they'll become
moves anyway, so we can simplify that. On the other hand, we do need the
type information for the lowering to work properly.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Mon, 30 Mar 2020 16:25:20 +0000 (12:25 -0400)]
pan/bi: Handle fp16/abs scheduling restriction
See previous commit for the packing side. Here we update the scheduler
to accomodate this. Note we don't actually hit this path yet, but it's
good to be proactive.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Sat, 28 Mar 2020 02:34:15 +0000 (22:34 -0400)]
pan/bi: Handle abs packing for fp16/FMA add/min
It's seriously quirky, and all to save a single bit. Alas. It also
introduces an edge case for the scheduler which is a bit annoying.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Sat, 28 Mar 2020 02:26:32 +0000 (22:26 -0400)]
pan/bi: Handle core faddminmax16 packing
This works without the exception of absolute values, which have some...
odd properties to be handled in the next commit.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Sat, 28 Mar 2020 02:26:09 +0000 (22:26 -0400)]
pan/bi: Structify fadd/min/max16
There is some quirky encoding here.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Sat, 28 Mar 2020 01:29:56 +0000 (21:29 -0400)]
pan/bi: Add v2f16 versions of rounding ops
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Sat, 28 Mar 2020 00:28:09 +0000 (20:28 -0400)]
pan/bi: Handle round opcodes in frontend
These correspond to various ops routed through BI_ROUND
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Sat, 28 Mar 2020 00:11:07 +0000 (20:11 -0400)]
pan/bi: Assert out i16 related converts for now
Needs more investigation, and GLSL doesn't use it quite yet sadly.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Sat, 28 Mar 2020 00:08:03 +0000 (20:08 -0400)]
pan/bi: Add one-source f32->f16 op
This really has a second op for vectorization but we don't handle this
quite yet...
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Sat, 28 Mar 2020 00:07:43 +0000 (20:07 -0400)]
pan/bi: Add bifrost_fma_2src generic
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Fri, 27 Mar 2020 23:06:28 +0000 (19:06 -0400)]
pan/bi: Handle standard FMA conversions
These are plain old 1-sources so they're easy to start with.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Fri, 27 Mar 2020 22:57:58 +0000 (18:57 -0400)]
pan/bi: Enumerate conversions
There are lots of Bifrost conversion opcodes that can all be emitted
from BI_CONVERT, let's pattern match.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Fri, 27 Mar 2020 22:34:21 +0000 (18:34 -0400)]
pan/bi: Expand out FMA conversion opcodes
There are a *lot* of them, with lots of symmetry we can exploit to
simplify the packing logic (but not entirely). Let's add the
corresponding header structs/defines, although we don't actually poke
the disassembler at this stage.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Fri, 27 Mar 2020 19:55:03 +0000 (15:55 -0400)]
pan/bi: Pack outmod and roundmode with FMA
The fields got missed.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Fri, 27 Mar 2020 19:53:57 +0000 (15:53 -0400)]
pan/bi: Add FMA16 packing
It's like the original FMA packing but with swizzles introduced.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Fri, 27 Mar 2020 19:53:12 +0000 (15:53 -0400)]
pan/bi: Fix missing type for fmul
We add a zero argument, we want it to align with the size of whatever
the other arguments were for optimization.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Fri, 27 Mar 2020 19:51:20 +0000 (15:51 -0400)]
pan/bi: Finish FMA structures
There were some missing fields for the 32-bit case, and the 16-bit case
has separate packing.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Fri, 27 Mar 2020 18:40:30 +0000 (14:40 -0400)]
pan/bi: Ignore swizzle in unwritten component
Otherwise we can trip the assert for no good reason.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Fri, 27 Mar 2020 18:40:04 +0000 (14:40 -0400)]
pan/bi: Handle f2f* opcodes
Just more converts that got missed.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Fri, 27 Mar 2020 18:39:39 +0000 (14:39 -0400)]
panfrost: Enable PIPE_SHADER_CAP_FP16 on Bifrost
We don't have fp16 implemented on Midgard yet but on Bifrost we can flip
it on now.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Fri, 27 Mar 2020 18:39:18 +0000 (14:39 -0400)]
pan/bi: Enable precision lowering in standalone compiler
..since there's no CAP to guide here.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Thu, 26 Mar 2020 14:10:33 +0000 (10:10 -0400)]
pan/bi: Fix off-by-one in scoreboarding packing
Clauses actually encode the *next* clauses' dependencies.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Thu, 26 Mar 2020 14:06:49 +0000 (10:06 -0400)]
pan/bi: Fix overzealous write barriers
It's possible this triggers an INSTR_INVALID_ENC.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Wed, 25 Mar 2020 18:56:06 +0000 (14:56 -0400)]
pan/bit: Begin generating a vertex job
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Tue, 24 Mar 2020 18:08:16 +0000 (14:08 -0400)]
pan/bit: Submit a WRITE_VALUE job as a sanity check
If this fails, everything else probably will too.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Tue, 24 Mar 2020 17:53:18 +0000 (13:53 -0400)]
panfrost: Stub out G31/G52 quirks
There are none so far, but we'll need quirks accessible for Bifrost
specific details in the future, and in the mean time we need to handle
the cases somehow to avoid the unreachable(..)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Tue, 24 Mar 2020 17:48:06 +0000 (13:48 -0400)]
pan/bit: Open up the device
As a start and a sanity check.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Tue, 24 Mar 2020 17:40:12 +0000 (13:40 -0400)]
panfrost: Move device open/close to root panfrost
We need it for standalone testing too.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Tue, 24 Mar 2020 17:24:03 +0000 (13:24 -0400)]
pan/bit: Link standalone compiler with en/decoder
We would like to submit jobs from the standalone compiler for testing
purposes, so let's get things wired up.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Mon, 23 Mar 2020 23:36:46 +0000 (19:36 -0400)]
panfrost: Move pan_bo to root panfrost
Now that its Gallium dependencies have been resolved, we can move this
all out to root. The only nontrivial change here is keeping the
pandecode calls in Gallium-panfrost to avoid creating a circular
dependency between encoder/decoder. This could be solved with a third
drm folder but this seems less intrusive for now and Roman would
probably appreciate if I went longer than 8 hours without breaking the
Android build.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Mon, 23 Mar 2020 23:17:49 +0000 (19:17 -0400)]
panfrost: Inline reference counting routines
We use only a very small subset of the capabilities of
pipe_reference (just wrappers for atomic ints..). Let's inline it and
drop the dependency on Gallium from pan_bo.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Mon, 23 Mar 2020 23:10:06 +0000 (19:10 -0400)]
panfrost: Isolate panfrost_bo_access_for_stage to pan_cmdstream.c
We don't use it outside this file (and really shouldn't) and it has a
strict Gallium dependency in pan_bo.h.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Alyssa Rosenzweig [Mon, 23 Mar 2020 22:44:21 +0000 (18:44 -0400)]
panfrost: Split panfrost_device from panfrost_screen
We would like to access properties of the device in a
Gallium-independent way (for out-of-Gallium testing in the short-term,
and would help a theoretical Vulkan implementation in the long run).
Let's split up the struct.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4382>
Icecream95 [Tue, 24 Mar 2020 04:33:22 +0000 (17:33 +1300)]
panfrost: Correctly identify format 0x4c
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4292>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4292>
Icecream95 [Tue, 24 Mar 2020 00:25:19 +0000 (13:25 +1300)]
panfrost: Add support for R3G3B2
Tested with texenv from mesa-demos.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4292>
Icecream95 [Tue, 24 Mar 2020 01:45:45 +0000 (14:45 +1300)]
st/mesa: Fall back on R3G3B2 for R3_G3_B2
It's simpler for Panfrost to use R3G3B2 instead of B2G3R3, but
format_map only listed the BGR variation.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4292>
Icecream95 [Tue, 24 Mar 2020 00:09:30 +0000 (13:09 +1300)]
panfrost: Add support for B5G5R5X1
Tested with texenv from mesa-demos.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4292>
Icecream95 [Mon, 23 Mar 2020 23:42:42 +0000 (12:42 +1300)]
panfrost: Mark 64-bit formats as unsupported
There is no hardware support for these formats, but some games use
them for vertex data.
This fixes a crash in Aleph One.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4292>
Jason Ekstrand [Mon, 30 Mar 2020 17:14:48 +0000 (12:14 -0500)]
nir: Handle vec8/16 in nir_shrink_array_vars
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Jason Ekstrand [Mon, 30 Mar 2020 17:09:03 +0000 (12:09 -0500)]
nir: Handle vec8/16 in opt_undef_vecN
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Jason Ekstrand [Mon, 30 Mar 2020 17:08:47 +0000 (12:08 -0500)]
nir: Treat vec8/16 as select in opt_peephole_select
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Jason Ekstrand [Mon, 30 Mar 2020 17:08:20 +0000 (12:08 -0500)]
nir: Handle vec8/16 in opt_split_alu_of_phi
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Jason Ekstrand [Mon, 30 Mar 2020 17:07:09 +0000 (12:07 -0500)]
nir: Handle vec8/16 in lower_regs_to_ssa
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Jason Ekstrand [Mon, 30 Mar 2020 17:06:52 +0000 (12:06 -0500)]
nir: Handle vec8/16 in lower_phis_to_scalar
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Jason Ekstrand [Mon, 30 Mar 2020 17:06:38 +0000 (12:06 -0500)]
nir: Handle vec8/16 in gather_ssa_types
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Jason Ekstrand [Mon, 30 Mar 2020 16:59:25 +0000 (11:59 -0500)]
nir: Handle vec8/16 in bool_to_bitsize
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Jason Ekstrand [Sat, 28 Mar 2020 16:23:52 +0000 (11:23 -0500)]
nir: Copy propagate through vec8s and vec16s
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Jason Ekstrand [Mon, 30 Mar 2020 17:06:22 +0000 (12:06 -0500)]
nir: Add a nir_op_is_vec helper
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Jason Ekstrand [Sat, 28 Mar 2020 16:24:08 +0000 (11:24 -0500)]
nir/algebraic: Add downcast-of-pack opts
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Jason Ekstrand [Sat, 28 Mar 2020 16:22:43 +0000 (11:22 -0500)]
nir/lower_int64: Lower 8 and 16-bit downcasts with nir_lower_mov64
We have the code to do the lowering, we were just missing the
boilerplate bits to make should_lower_int64_alu_instr return true.
Fixes: 62d55f12818e "nir: Wire up int64 lowering functions"
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4365>
Rob Clark [Mon, 30 Mar 2020 16:30:54 +0000 (09:30 -0700)]
freedreno/log: avoid duplicate ts's
In cases where `fd_log()`/`fd_log_stream()` are called multiple times
back-to-back, just use the timestamp of the first trace.
This seems to avoid some occasional GPU hangs I was seeing with logging
enabled. Although not exactly sure the reason for the hangs. (Looks
like GPU hangs *after* all the cmdstream is processed, according to
crashdec.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4366>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4366>
Rob Clark [Sat, 28 Mar 2020 18:28:14 +0000 (11:28 -0700)]
freedreno/a6xx: add some more tracepoints
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4366>
Rob Clark [Sat, 28 Mar 2020 17:54:10 +0000 (10:54 -0700)]
freedreno: add some initial fd_log tracepoints
Mostly convert over existing DBG traces.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4366>
Rob Clark [Sat, 28 Mar 2020 17:43:42 +0000 (10:43 -0700)]
freedreno/a6xx: timestamp logging support
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4366>
Rob Clark [Sat, 28 Mar 2020 16:57:35 +0000 (09:57 -0700)]
freedreno: add logging infrastructure
Provides a way to log msgs timestamped at the corresponding position in
the GPU cmdstream, mostly for the purposes of profiling.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4366>
Rob Clark [Sat, 28 Mar 2020 18:14:05 +0000 (11:14 -0700)]
util: fix u_fifo_pop()
Seems like no one ever depended on it to actually return false when fifo
is empty.
Fixes: 6e61d062093 ("util: Add super simple fifo")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4366>
Rob Clark [Sat, 28 Mar 2020 16:07:43 +0000 (09:07 -0700)]
freedreno: remove some obsolete debug options
'fraghalf' is unused (superceeded by actually lowering output based on
the precision information in nir). And glsl140 support in ir3 is long
past the experimental stage, so the glsl120 option is no longer needed.
So remove them and free up some bits for new things.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4366>
Jason Ekstrand [Mon, 30 Mar 2020 21:39:01 +0000 (16:39 -0500)]
nir/opt_loop_unroll: Fix has_nested_loop handling
In
87839680c0a48, a very subtle mistake was made with the CFG walking
recursion. Instead of setting the local has_nested_loop variable when
process child loops, has_nested_loop_out was passed directly into the
process_loop_in_block call. This broke nested loop detection heuristics
and caused loop unrolling to run massively out of control. In
particular, it makes the following CTS test compile virtually forever:
dEQP-VK.spirv_assembly.instruction.graphics.16bit_storage.struct_mixed_types.uniform_buffer_block_geom
Fixes: 87839680c0 "nir: Fix breakage of foreach_list_typed_safe..."
Closes: #2710
Reviewed-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4380>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4380>
Eric Anholt [Mon, 23 Mar 2020 21:55:50 +0000 (14:55 -0700)]
freedreno: Work around UBWC flakiness.
In trying to track down the new failure in #2670, I found that I could get
the flaky test set down to 4 tests, and dropping any remaining test
wouldn't trigger the failure (a bad 8x4 block in the middle of
dEQP-GLES3.functional.fbo.msaa.4_samples.r16f's render target). Disabling
gmem or bypass didn't help, and adding lots of CCU flushing didn't help.
What did help was disabling blitting, or this memset to initialize the
UBWC area after we (presumably) pull a BO out of the BO cache. My guess
is that the 2D blitter can't handle some rare set of state in the flags
buffer and emits some garbage.
I've run 8 gles3 and 7 gles31 runs with this branch now so hopefully I've got the4 right set of flakes marked for removal.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2670
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4290>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4290>
Eric Anholt [Sat, 28 Mar 2020 00:23:19 +0000 (17:23 -0700)]
freedreno: Fix detection of being in a blit for acc queries.
The batch might not have stage == FD_STAGE_BLIT set because
fd_blitter_pipe_begin was sticking the stage on some random batch (or none
at all) rather than the one that would be used in the meta operation.
What we actually wanted to be looking at was set_active_query_state(),
which is already called by util_blitter and whose state we just needed to
track.
Fixes piglit occlusion_query_meta_no_fragments. I haven't changed
query_hw.c's stage handling to clean the rest up because I don't have a
db410c/db820c at home to iterate over the piglit tests.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4356>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4356>
Eric Anholt [Sat, 28 Mar 2020 00:13:25 +0000 (17:13 -0700)]
freedreno: Rename "is_blit" to "is_discard_blit"
It's about the special case of an overwrite of a level meaning we can
discard old batch contents.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4356>
Eric Anholt [Mon, 30 Mar 2020 17:23:45 +0000 (10:23 -0700)]
freedreno/a6xx: Fix timestamp queries.
We were returning the same kind of result as time_elapsed (an end - start
time in ns), which on a timestamp query is approximately zero since
begin/end are at the same point in time. What we're supposed to return is
a converted-to-ns timestamp based on the GPU clock. Remove the _pause()
function for time_elapsed to reduce the command stream overhead, and just
capture start (which is, unfortunately, going to happen on each tile and
thus the final start value we ready will be the last tile of the frame,
not the first).
Fixes piglit spec/arb_timer_query/query gl_timestamp
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4356>
Eric Anholt [Fri, 27 Mar 2020 17:54:19 +0000 (10:54 -0700)]
freedreno: Count blits in GL_TIME_ELAPSED and perf counter queries.
Fixes 0 gpu time reported for glBlitFramebuffer in apitrace replay --pgpu.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4356>
Eric Anholt [Fri, 27 Mar 2020 18:31:24 +0000 (11:31 -0700)]
freedreno: Associate the acc query bo with the batch.
Otherwise, a result query with wait won't trigger flushing the batch, and
we can end up with zeroed results.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4356>
Eric Anholt [Fri, 27 Mar 2020 22:55:14 +0000 (15:55 -0700)]
freedreno: Fix acc query handling in the presence of batch reordering.
When we switch batches and start a new draw, we need to cap the queries in
the previous batch and start queries again in the new one.
FD_STAGE_NULL got renamed to 0 so that it would naturally return
!is_active and end the queries at the end of the batch.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4356>
Eric Anholt [Fri, 27 Mar 2020 23:48:05 +0000 (16:48 -0700)]
freedreno: Remove the "active" member of queries.
The state tracker only gets to begin/query/destroy when !active and end
when active, so we have no need to try to track this ourselves.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4356>
Eric Anholt [Fri, 27 Mar 2020 23:46:22 +0000 (16:46 -0700)]
freedreno: Remove always-true return from per-gen begin_query.
You should do failure-prone allocation in create_query, not begin, anyway.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4356>
Rhys Perry [Thu, 26 Mar 2020 15:50:31 +0000 (15:50 +0000)]
util/u_queue: fix race in total_jobs_size access
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
CC: <mesa-stable@lists.freedesktop.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4335>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4335>
Rhys Perry [Thu, 26 Mar 2020 15:49:05 +0000 (15:49 +0000)]
glsl: fix race in instance getters
Insertions can modify entry->data. Seems to fix random Fossilize crashes.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
CC: <mesa-stable@lists.freedesktop.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4335>
Jason Ekstrand [Fri, 27 Mar 2020 04:56:57 +0000 (23:56 -0500)]
nir: Set UBO alignments in lower_uniforms_to_ubo
Fixes: fb64954d9dd "nir: Validate that memory load/store ops work on..."
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4378>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4378>
Rhys Perry [Thu, 26 Mar 2020 13:22:13 +0000 (13:22 +0000)]
aco: look at p_{extract,split}_vector's definitions in pred_by_exec_mask()
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4333>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4333>
Daniel Stone [Mon, 30 Mar 2020 14:58:51 +0000 (15:58 +0100)]
CI: Re-enable Windows VS2019 builds
The failures are fixed, but I didn't notice this had been silently
disabled in !4272.
Re-enable the VS2019 build.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4374>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4374>
Jason Ekstrand [Fri, 27 Mar 2020 18:08:21 +0000 (13:08 -0500)]
nir: Validate that memory load/store ops work on whole bytes
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4338>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4338>
Jason Ekstrand [Thu, 26 Mar 2020 20:46:56 +0000 (15:46 -0500)]
anv: Set alignments on descriptor and constant loads
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4338>
Jason Ekstrand [Fri, 27 Mar 2020 05:30:25 +0000 (00:30 -0500)]
nir: Insert b2b1s around booleans in nir_lower_to
By inserting a b2b1 around the load_ubo, load_input, etc. intrinsics
generated by nir_lower_io, we can ensure that the intrinsic has the
correct destination bit size. Not having the right size can mess up
passes which try to optimize access. In particular, it was causing
brw_nir_analyze_ubo_ranges to ignore load_ubo of booleans which meant
that booleans uniforms weren't getting pushed as push constants. I
don't think this is an actual functional bug anywhere hence no CC to
stable but it may improve perf somewhere.
Shader-db results on ICL with iris:
total instructions in shared programs:
16076707 ->
16075246 (<.01%)
instructions in affected programs: 129034 -> 127573 (-1.13%)
helped: 487
HURT: 0
helped stats (abs) min: 3 max: 3 x̄: 3.00 x̃: 3
helped stats (rel) min: 0.45% max: 3.00% x̄: 1.33% x̃: 1.36%
95% mean confidence interval for instructions value: -3.00 -3.00
95% mean confidence interval for instructions %-change: -1.37% -1.29%
Instructions are helped.
total cycles in shared programs:
338015639 ->
337983311 (<.01%)
cycles in affected programs: 971986 -> 939658 (-3.33%)
helped: 362
HURT: 110
helped stats (abs) min: 1 max: 1664 x̄: 97.37 x̃: 43
helped stats (rel) min: 0.03% max: 36.22% x̄: 5.58% x̃: 2.60%
HURT stats (abs) min: 1 max: 554 x̄: 26.55 x̃: 18
HURT stats (rel) min: 0.03% max: 10.99% x̄: 1.04% x̃: 0.96%
95% mean confidence interval for cycles value: -79.97 -57.01
95% mean confidence interval for cycles %-change: -4.60% -3.47%
Cycles are helped.
total sends in shared programs: 815037 -> 814550 (-0.06%)
sends in affected programs: 5701 -> 5214 (-8.54%)
helped: 487
HURT: 0
LOST: 2
GAINED: 0
The two lost programs were SIMD16 shaders in CS:GO. However, CS:GO was
also one of the most helped programs where it shaves sends off of 134
programs. This seems to reduce GPU core clocks by about 4% on the first
1000 frames of the PTS benchmark.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4338>
Jason Ekstrand [Fri, 27 Mar 2020 05:29:14 +0000 (00:29 -0500)]
nir: Use b2b opcodes for shared and constant memory
No shader-db changes on ICL with iris
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4338>
Jason Ekstrand [Fri, 27 Mar 2020 16:49:14 +0000 (11:49 -0500)]
aco: Implement b2b32 and b2b1
The implementations here just clone i2b32 and i2b1. This means that
b2b32 doesn't technically generate true NIR 0/-1 booleans but it should
be fine as it's only ever generated for shared variable writes which
will always be consumed by something which will then run it through an
i2b again.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4338>
Jason Ekstrand [Fri, 27 Mar 2020 05:18:43 +0000 (00:18 -0500)]
nir: Add b2b opcodes
These exist to convert between different types of boolean values. In
particular, we want to use these for uniform and shared memory
operations where we need to convert to a reasonably sized boolean but we
don't care what its format is so we don't want to make the back-end
insert an actual i2b/b2i. In the case of uniforms, Mesa can tweak the
format of the uniform boolean to whatever the driver wants. In the case
of shared, every value in a shared variable comes from the shader so
it's already in the right boolean format.
The new boolean conversion opcodes get replaced with mov in
lower_bool_to_int/float32 so the back-end will hopefully never see them.
However, while we're in the middle of optimizing our NIR, they let us
have sensible load_uniform/ubo intrinsics and also have the bit size
conversion.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4338>
Jason Ekstrand [Fri, 27 Mar 2020 16:05:27 +0000 (11:05 -0500)]
intel/nir: Run copy-prop and DCE after lower_bool_to_int32
No shader-db impact on ICL with iris.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4338>
Christian Gmeiner [Sun, 22 Mar 2020 21:42:35 +0000 (22:42 +0100)]
etnaviv: compiled_framebuffer_state: get rid of SE_SCISSOR_*
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4278>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4278>
Christian Gmeiner [Sun, 22 Mar 2020 10:16:58 +0000 (11:16 +0100)]
etnaviv: s/scissor_s/scissor
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4278>
Christian Gmeiner [Sun, 22 Mar 2020 10:13:12 +0000 (11:13 +0100)]
etnaviv: get rid of struct compiled_scissor_state
We can reuse pipe_scissor_state.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4278>
Christian Gmeiner [Sun, 22 Mar 2020 10:07:16 +0000 (11:07 +0100)]
etnaviv: do the left shift by 16 at emit time
Also round up the max bounds.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4278>
Christian Gmeiner [Sat, 21 Mar 2020 10:24:48 +0000 (11:24 +0100)]
etnaviv: rework clippling calculation to be a derived state
This moves the whole clipping calculation out of the emit function.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4278>
Christian Gmeiner [Sat, 21 Mar 2020 10:16:37 +0000 (11:16 +0100)]
etnaviv: get rid of SE_CLIP_*
The only difference between e.g. SE_SCISSOR_RIGHT and SE_CLIP_RIGHT
is the used margin value. With that information we can remove
SE_CLIP_* and apply the different margins during emit time.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4278>
Jose Fonseca [Sat, 28 Mar 2020 10:36:28 +0000 (10:36 +0000)]
gitlab-ci: Prune all SCons jobs except scons-win64, and allows failures.
Based on the discussion in https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4352
Reviewed-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4363>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4363>
Samuel Pitoiset [Fri, 27 Mar 2020 15:40:38 +0000 (16:40 +0100)]
nir/algebraic: add fexp2(fmul(flog2(a), 0.5) -> fsqrt(a) optimization
Helps some Wolfenstein II and Wolfenstein Youngblood shaders.
pipeline-db (VEGA10/ACO):
Totals from affected shaders:
SGPRS: 17904 -> 17904 (0.00 %)
VGPRS: 14492 -> 14492 (0.00 %)
Spilled SGPRs: 20 -> 20 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size:
1753152 ->
1749708 (-0.20 %) bytes
Max Waves: 2581 -> 2581 (0.00 %)
pipeline-db (VEGA10/LLVM):
Totals from affected shaders:
SGPRS: 26656 -> 26656 (0.00 %)
VGPRS: 23780 -> 23780 (0.00 %)
Spilled SGPRs: 2112 -> 2112 (0.00 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Code Size:
2552712 ->
2549236 (-0.14 %) bytes
Max Waves: 3359 -> 3359 (0.00 %)
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4353>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4353>
Jose Fonseca [Fri, 27 Mar 2020 15:07:32 +0000 (15:07 +0000)]
scons: Prune out unnecessary targets.
This prunes out all targets except libgl-gdi, libgl-xlib, and svga, as
suggested by Marek Olšák.
libgl-xlib will be remove once I have had time to confirm no automated
tests we have rely upon it.
There are also a bunch of Makefile.sources which become orphaned as
result, that are not taken care of in this change.
v2: Prune remainders of swr support.
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4348>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4348>
Timur Kristóf [Thu, 26 Mar 2020 18:36:05 +0000 (19:36 +0100)]
aco: Don't store LS VS outputs to LDS when TCS doesn't need them.
Totals:
Code Size:
254764624 ->
254745104 (-0.01 %) bytes
Totals from affected shaders:
VGPRS: 12132 -> 12112 (-0.16 %)
Code Size: 573364 -> 553844 (-3.40 %) bytes
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
Timur Kristóf [Thu, 26 Mar 2020 16:45:55 +0000 (17:45 +0100)]
aco: When LS and HS invocations are the same, pass LS outputs in temps.
We know that in this case, the LS and HS invocations are working
on the exact same vertex, so it's safe to skip the LDS.
Totals:
VGPRS:
3960744 ->
3961844 (0.03 %)
Code Size:
254824300 ->
254764624 (-0.02 %) bytes
Max Waves:
1053748 ->
1053574 (-0.02 %)
Totals from affected shaders:
VGPRS: 26152 -> 27252 (4.21 %)
Code Size:
1496600 ->
1436924 (-3.99 %) bytes
Max Waves: 4860 -> 4686 (-3.58 %)
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4165>
projects / mesa.git / log