package/docker-engine: security bump to 19.03.5

Fixes the following security vulnerabilities:

- CVE-2019-14271: In Docker 19.03.x before 19.03.1 linked against the GNU C
  Library (aka glibc), code injection can occur when the nsswitch facility
  dynamically loads a library inside a chroot that contains the contents of
  the container

Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: mention security impact]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/docker-containerd: security bump to 1.2.11

Fixes the following security vulnerabilities:

containerd 1.2.9/gRPC:

- CVE-2019-9512: Some HTTP/2 implementations are vulnerable to ping floods,
  potentially leading to a denial of service.  The attacker sends continual
  pings to an HTTP/2 peer, causing the peer to build an internal queue of
  responses.  Depending on how efficiently this data is queued, this can
  consume excess CPU, memory, or both

- CVE-2019-9514: Some HTTP/2 implementations are vulnerable to a reset
  flood, potentially leading to a denial of service.  The attacker opens a
  number of streams and sends an invalid request over each stream that
  should solicit a stream of RST_STREAM frames from the peer.  Depending on
  how the peer queues the RST_STREAM frames, this can consume excess memory,
  CPU, or both

- CVE-2019-9515: Some HTTP/2 implementations are vulnerable to a settings
  flood, potentially leading to a denial of service.  The attacker sends a
  stream of SETTINGS frames to the peer.  Since the RFC requires that the
  peer reply with one acknowledgement per SETTINGS frame, an empty SETTINGS
  frame is almost equivalent in behavior to a ping.  Depending on how
  efficiently this data is queued, this can consume excess CPU, memory, or
  both

containerd 1.2.10/runc:

- CVE-2019-16884: runc through 1.0.0-rc8, as used in Docker through
  19.03.2-ce and other products, allows AppArmor restriction bypass because
  libcontainer/rootfs_linux.go incorrectly checks mount targets, and thus a
  malicious Docker image can mount over a /proc director

Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: mention security impact]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/runc: security bump to 1.0.0-rc9

Fixes the following security vulnerability:

- CVE-2019-16884: runc through 1.0.0-rc8, as used in Docker through
  19.03.2-ce and other products, allows AppArmor restriction bypass because
  libcontainer/rootfs_linux.go incorrectly checks mount targets, and thus a
  malicious Docker image can mount over a /proc directory.

Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: mention security impact]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nano: bump version to 4.7

Release notes:
4.6: https://lists.gnu.org/archive/html/info-gnu/2019-11/msg00011.html
4.7: https://lists.gnu.org/archive/html/info-gnu/2019-12/msg00005.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libmicrohttpd: bump version to 0.9.69

Release notes:
https://lists.gnu.org/archive/html/info-gnu/2019-12/msg00003.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/jsoncpp: bump version to 1.9.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tvheadend: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libva-utils: bump version to 2.6.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libva-intel-driver: bump version to 2.4.0

Removed patch applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libva: bump version to 2.6.0

Added bugfix patch to fix known issue suggested by upstream:
https://github.com/intel/libva/releases/tag/2.6.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xdriver_xf86-video-intel: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/{mesa3d, mesa3d-headers}: bump version to 19.3.1

Removed patch 0004, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.4.x series

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linux-headers: drop support for 5.3.x headers

The 5.3.x series is now EOL so remove the option and add legacy
handling for it.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tor: bump version to 0.4.2.5

Release notes:
https://blog.torproject.org/new-release-0425-also-0417-0406-and-0359

Updated license hash due to upstream commit:
https://gitweb.torproject.org/tor.git/commit/LICENSE?h=maint-0.4.2&id=272265efbd89c4c2589316a20cf27064def21911

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sqlite: bump version to 3.30.1

Release notes: https://sqlite.org/releaselog/3_30_1.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xdriver_xf86-video-sis: bump version to 0.12.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xlib_libXpm: bump version to 3.5.13

Removed patch applied upstream:
https://cgit.freedesktop.org/xorg/lib/libXpm/commit/?id=7af7c5e275b69daedee3696bee1e880586f30373

Removed autoreconf.

Added all hashes provided by upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x265: bump version to 3.2.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/stellarium: bump version to 0.19.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libvpx: bump version to 1.8.2

Changelog:
https://github.com/webmproject/libvpx/blob/master/CHANGELOG

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cpio: security bump to version 2.13

Removed patch fixing CVE-2016-2037 which was applied upstream.

This release fixes CVE-2015-1197, CVE-2016-2037, CVE-2019-14866.

Switched to .bz2 tarball.
Added hashes provided by upstream and license hash.

Release notes:
https://lists.gnu.org/archive/html/info-gnu/2019-11/msg00002.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gnupg2: bump version to 2.2.19

Release notes:
- 2.2.18
  https://lists.gnupg.org/pipermail/gnupg-announce/2019q4/000442.html
- 2.2.19
  https://lists.gnupg.org/pipermail/gnupg-announce/2019q4/000443.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wavemon: bump to version 0.9.1

Drop patch (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/spi-tools: bump to version 0.8.4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mosquitto: drop patch

Drop patch (refused by upstream) and use CLIENT_STATIC_LDADD that has
been added in version 1.6.8 with
https://github.com/eclipse/mosquitto/commit/6bde2097992f7d672e4c2c36168bfb5c73579bc3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

toolchain/toolchain-external: update Arm AArch64 toolchain 9.2-2019.12

Update to gcc 9.2.1, gdb 8.3.0, binutils 2.33.1.

See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#

Tested with qemu_aarch64_virt_defconfig.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-external: update Arm ARM toolchain 9.2-2019.12

Update to gcc 9.2.1, gdb 8.3.0, binutils 2.33.1.

See "Release Note":
https://developer.arm.com/open-source/gnu-toolchain/gnu-a/downloads#

Tested with qemu_arm_vexpress_defconfig.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freeswitch: bump version to 1.10.2

Rebased patch 0001.

Release notes:
https://github.com/signalwire/freeswitch/releases/tag/v1.10.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ffmpeg: bump version to 4.2.2

Changelog:
http://git.videolan.org/?p=ffmpeg.git;a=blob;f=Changelog;h=9c992b5c3e3995a0e8f3316b3087205196dc6403;hb=refs/heads/release/4.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/samba4: security bump version to 4.11.4

Version 4.11.3 fixes

CVE-2019-14861: Samba AD DC zone-named record Denial of Service in DNS
                management server (dnsserver).
CVE-2019-14870: DelegationNotAllowed not being enforced in protocol
                transition on Samba AD DC.

Changelog:
https://www.samba.org/samba/history/samba-4.11.3.html
https://www.samba.org/samba/history/samba-4.11.4.html

Removed patches applied upstream, rebased patch 0002.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/exim: bump version to 4.93.0.3

Removed 0004-Fix-uClibc-build.patch, committed upstream
https://git.exim.org/exim.git/commitdiff/ec5bf0b83235d01ad0b2865d1819a603441f50f2

Renumbered remaining patches.

Added hashes provided by upstream.

Explicitly disabled DANE after upstream enabled it:
https://git.exim.org/exim.git/commitdiff/59c0959a36649c4554bd0f18f2c2e74571ed41eb#patch3

Use new TLS options:
https://git.exim.org/exim.git/commitdiff/01603eec64d42431f182b33008206facfc7f800e#patch1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dovecot-pigeonhole: bump version to 0.5.9

Release notes:
https://dovecot.org/pipermail/dovecot-news/2019-December/000424.html
https://dovecot.org/pipermail/dovecot-news/2019-October/000420.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dovecot: bump version to 2.3.9.2

Release notes:
https://dovecot.org/pipermail/dovecot-news/2019-October/000419.html
https://dovecot.org/pipermail/dovecot-news/2019-December/000423.html
https://dovecot.org/pipermail/dovecot-news/2019-December/000425.html
https://dovecot.org/pipermail/dovecot-news/2019-December/000427.html

Please note that according to
https://security-tracker.debian.org/tracker/CVE-2019-19722
CVE-2019-19722 fixes a bug introduced in 2.3.9 so backporting this patch
to older buildroot branches is not necessary.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linux-tools: add hyperv integration services

The hyperv integration services offer convenience features for guest
operating systems running on the microsoft hyperv virtualization
platform. They roughly are for HyperV what openvmtools are for VMWare.

The installed binary names are derived from what seems common in large
distros like RedHat:

  linux kernel source name -> installed binary name
             hv_vss_daemon -> hypervvssd
             hv_kvp_daemon -> hypervkvpd
           hv_fcopy_daemon -> hypervfcopyd

Each tool was introduced at different points in the kernel history, so
we need to check each of them.

We provide a single init script that is responsible for starting all
enabled programs. The global status will be the status of the last
program to fail to start, or empty (i.e. success) if they all started
successfuly.

However, we provide one systemd unit per program, because it is not easy
to use a single unit to start (and monitor) more than one executable.
Additionally, we do not provide a template that is filled at tinstall
time either, because it does not gain much (three simple units vs. a
template and some replacement code in the .mk).

Finally, the key-value daemon uses a few helper scripts to get/set the
network config. All are optional (their presence is checked before
running them), but one, hv_set_ifconfig. However, it is not strictly
speaking required either, so we just symlink it to /bin/true to avoid
any warning at runtime. Providing actual helpers is left to the end
user, to adapt to their own environment.

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
[yann.morin.1998@free.fr:
  - aggregate all three tools in a single sub-package
  - introduce the main HV option, use a sub-option for each tool
  - aggregate the three init scripts into one
  - don't install the helpers; symlink the mandatory one
  - don't create symlinks for systemd units (systemctl preset-all does
    it for us now)
  - expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linux-tools: add support for installing init system files

Some linux tools (e.g. the Microsoft HyperV convenience utilities) will
install programs tostart at boot time, so they need to be able to
install init files (systemd units, sysv init script, or openrc units).

Unlike the other commands, we are redefining the real _INSTALL_INIT_*
macros, rather than use hooks, to let the infra call those at the right
moment.

We must be careful about the openrc support, though: if two tools are
enabled, one which provides sysv scripts but no openrc config, and the
other which provides openrc config, and we are using openrc as init
system, then we want to use the sysv scripts from the former as well as
the openrc config of the latter. Thus we need to duplicate a bit the
openrc logic here.

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
[yann.morin.1998@free.fr:
  - define macros, not hooks
  - introduce support for openrc too
  - expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: really fix python-gitdb2 test

The test-case for python-gitdb2 consists solely in verifying that the
module can indeed be imported.

However, flake8 errors out on unused imports. Furthermore, it also
errors about wildcard imports, as it can detect unused symbols.

Commit d8c86be9cd7 (support/testing: fix python-gitdb2 test) tried to
address this issue, by explicitly squelching the two errors, F401 and
F403.

While that works on recent distros, the image used by our docker
pipeline is laggign behind and the flake8 there only handles at most a
single error in the noqa list.

Do as is done with the other python samples, and just blindly ignore
all errors.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libmbim: bump to version 1.20.4

Small update with several memory leaks fixed.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

.gitlab-ci.yml: add missing python-avro test

Commit 9fa2add810c (support/testing: add test for python-avro) added a
test for python-avro but failed to update .gitlab-ci.yml. Do that now.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mmc-utils: fix build with SSP

Set AM_CFLAGS to an empty value to avoid the following redefinition
error when building with our custom _FORTIFY_SOURCE:

/accts/mlweber1/rc-buildroot-test/scripts/instance-1/output/host/bin/mips-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Werror -Wuninitialized -Wundef -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64  -Os  -D_FORTIFY_SOURCE=1 -Wp,-MMD,3rdparty/hmac_sha/.hmac_sha2.o.d,-MT,3rdparty/hmac_sha/hmac_sha2.o -c 3rdparty/hmac_sha/hmac_sha2.c -o 3rdparty/hmac_sha/hmac_sha2.o
<command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror]

Fixes:
 - http://autobuild.buildroot.org/results/cfef9315441b5f4909b58a6dccd8bea8e67ae992

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: fix typo

Reported-by: Dan Walkes <danwalkes@trellis-logic.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/openvpn: enable pam plugin support

If the linux-pam package is selected, add the package to the
dependency list and explicitly set --enable-plugin-auth-pam.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/samba4: AD DC needs python3

python3 is mandatory since version 4.11 and
https://gitlab.com/samba-team/samba/commit/63d20d7822ead1626f7cb41fdbae6c9300893314

As a result, AD DC needs python3

Fixes:
 - http://autobuild.buildroot.org/results/7af629b8acc92c81e006b1b87ae9a6fd461cf96d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/log4cplus: fix detection of -latomic

Fixes:
 - http://autobuild.buildroot.org/results/5451df835e0e96545b322bc9bd74f76273ee3b34

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/librsync: fix static link with popt

Use pkg-config to retrieve popt dependencies such as iconv

Fixes:
 - http://autobuild.buildroot.org/results/896e8e3efbedad90d66ae8c4e1e50f16206cab49

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/stella: needs exception_ptr

exception_ptr is needed since version 6.0 and
https://github.com/stella-emu/stella/commit/afb1e1d1e1bc5afdb79860d2e33af3abc761303c

Fixes:
 - http://autobuild.buildroot.org/results/b231de3d233481f11e6cd6a4df9bb6a9da685b9f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-multidict: bump to version 4.7.3

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/config-fragments/autobuild: fix riscv toolchains

In commit aee39cbf27e (arch/riscv: set the default float ABI based on
ISA extensions), the default ABI changed, so the config fragments used
by the autobuilders were adapated accordingly, in commit f89871e81085
(support/config-fragments: fix br-riscv{32,64} toolchain fragments).

But now, we need to revert again, because the newer toolchains are now
using the default ABI again.

We do not really do a revert, though, because the original change was
right, and a revert would mean it was not.

Fixes:
    http://autobuild.buildroot.org/results/b59/b593267fb9fc9a002b977e049b2a5389dbaded30/ (riscv32)
    http://autobuild.buildroot.org/results/b42/b42a4b22b29f47d5c85be119b310f1dfb61112a1/ (riscv64)
    ... and so many others on various packages...

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pulseaudio: replace host-intltool by $(TARGET_NLS_DEPENDENCIES)

intltool has been replaced by gettext since version 12.99.1 and
https://gitlab.freedesktop.org/pulseaudio/pulseaudio/commit/57e3ccaf51f714eec8ca29005c3cc4fde456e84e
so replace host-intltool by $(TARGET_NLS_DEPENDENCIES)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gcr: bump to version 3.34.0

intltool has been replaced by gettext since version 3.33.4 and
https://gitlab.gnome.org/GNOME/gcr/commit/4fb05684d2f181c35898fc26f5675b07e7e2dd34
so replace host-intltool by $(TARGET_NLS_DEPENDENCIES)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/proj: update to 6.2.1

Signed-off-by: Zoltan Gyarmati <zgyarmati@zgyarmati.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/minicom: bump version

Shortlog follows:
Adam Lackorzynski (2):
      minicom.c: Convert TABs to spaces
      minicom.c: Reflow long_options

Rasmus Villemoes (1):
      Allow user to specify buffering mode of capture file

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libnss: fix build failure on PowerPC, PowerPC64

libnss expects OS_TEST to be set to ppc, ppc64, or ppc64le instead of
the usual values defined by Buildroot, respectively powerpc, powerpc64,
or powerpc64le.

This fixes the inconsistencies where functions would be prototyped and
called, but no implementation would be provided, causing link issues.

Define all the variants (of which the existing aarch64be) in Kconfig.
The latest default uses the usual architecture names as defined by
Buildroot, BR2_ARCH.

Additionally, libnss makes use of Altivec intrinsics which are only
available starting with gcc 8, not gcc 5, so we patch it to fix that
condition.

Fixes:
    http://autobuild.buildroot.org/results/579/57928e6cf69d584b430a1d9a99156c57f29b692f/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
  - move the arch setting to kconfig (like recently done in e3159cad71)
  - add the build failure
  - add pointer to upstream bug report and patch sybmission
  - reformat and reword commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/cc-tool: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/stm32mp157c_dk2: remove unnecessary workaround

Now that the metadata_csum ext4 option is disabled, we no longer need
the U-Boot workaround.

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/stm32mp157c_dk2: disable ext4 metadata_csum option

The U-Boot ext4 write support doesn't work with the metadata_csum
option, and the stm32mp157 U-Boot defconfig uses an environment stored
in an ext4 filesystem, so we must create the ext4 root filesystem
without the metadata_csum option enabled.

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[Thomas: only disable the metadata_csum option, the 64bit and
dir_index options can be kept enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pyqt5: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/proj: fix build failure due to gcc bug 68485(C++)

The proj package exhibits gcc bug 68485 when building for the
Microblaze architecture C files (which was already worked around), but
also for C++ files.

As done for other packages in Buildroot work around this gcc bug by
setting optimization to -O0 when compiling C++ files too if
BR2_TOOLCHAIN_HAS_GCC_BUG_68485=y.

Fixes:
http://autobuild.buildroot.net/results/dc9/dc9bc52ff3d5a83dcfe4a86a391590bef57e1cf0/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Thomas: rework implementation to use a single condition for both CFLAGS and CXXFLAGS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/suricata: fix shabang for python scripts

/usr/bin/suricatactl and /usr/bin/suricatasc have their interpreter set
to the path of python in the HOST machine.

Use distutils' option '-e' to specify a better shabang.

[yann.morin.1998@free.fr:
  - author did not provide their SoB, but it's simple enough to
    not require it for once
  - reword commit log
  - use git-formatted patch, with a proper commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

boot/uboot: cover more u-boot versions when fixing up libfdt include paths

The original UBOOT_FIXUP_LIBFDT_INCLUDE hook only works for u-boot versions
starting from v2017.11.

As older u-boot versions are still in common use today, e.g. in the
ci20_defconfig, extend the hook to cover a wider range of u-boot versions.

The main code change was proposed by Arnout Vandecappelle in [1].
Testing and comment changes were done by Thomas De Schampheleire.
Additional (build) testing done by Yann.

[1] http://lists.busybox.net/pipermail/buildroot/2019-May/251231.html

This was tested with the following defconfigs, that each excercise one
case:

    ----.--     No defconfig identified
    2010.06     'lib/libfdt/', used to be simply 'libfdt' before upstream commit 0de71d507157...
    2013.10     ci20_defconfig
    2014.04     'srctree' used to be called 'SRCTREE' before upstream commit 01286329b27b27ea...
    2017.05     olimex_a13_olinuxino_defconfig
    2017.11     scripts/dtc/libfdt only exists since upstream commit c0e032e0090d6541549b19cc...
    2018.01     mx6udoo_defconfig
    2018.03     core change is equivalent to upstream commit e0d20dc1521e74b82dbd69be53a04884...
    2019.10     nanopi_neo_defconfig

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: add the build-test results]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/tinyssh: new package

TinySSH is a minimalistic SSH server which implements only a subset of
SSHv2 features.

Might be useful for small systems.

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[yann.morin.1998@free.fr:
  - add missing licence file, as noticed by Giulio
  - update the version to bring two fixes
  - update hash file accordingly (version and licence file)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/autofs: fix fsck program paths

Following Arnout review of "autofs: fix mount, umount and fsck program
paths" in https://patchwork.ozlabs.org/patch/1148086, set
ac_cv_path_E2FSCK to /sbin/fsck and ac_cv_path_E{3,4}FSCK to no so that
the fsck wrapper will always gets used (if the e3 and e4 versions don't
exist, the e2 version is used regardless of fs type).

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/apitrace: fix build failure due to gcc bug 68485 and 85180

The apitrace package exhibits gcc bug 68485 when built for the
Microblaze architecture with optimization enabled, which causes a build
failure. This is mainly due to 3rd party brotli embedded in apitrace
that already has been fixed in Buildroot as single package. After
working around this bug overriding -O0 to CFLAGS(Brotli is a C program),
gcc bug 81580 showed off while compiling C++ files.

So, as done for other packages in Buildroot, work around this gcc bug by
setting optimization to -O0(in CFLAGS) if
BR2_TOOLCHAIN_HAS_GCC_BUG_68485=y. And do the same(but in CXXFLAGS) if
BR2_TOOLCHAIN_HAS_GCC_BUG_85180=y as already done for other packages.

Fixes:
http://autobuild.buildroot.net/results/a46/a46626cc50f07f41d831614306f556d346d31429/

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: reorganise the conditions]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/php: remove sample config in new location

the upstream php-fpm sample configuration is placed in

  /etc/php-fpm.d/www.conf.default

in recent version of php, so adjust the build cleanup
accordingly

Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
[yann.morin.1998@free.fr: only remove the file, not the directory]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/qemu: Update defconfigs to Linux 4.19.91

Linux version is changed to 4.19.91 (the last version of 4.19).

Build- and runtime-tested for aarch64 and x86_64.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
[yann.morin.1998@free.fr: add the test report provided by Philipe on IRC]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libcurl: add option for no SSL/TLS support

Since we already have a choice to select the backend to do crypto, push
the limits even further and add an option to do no crypto.

Usually, we would have added that option first in the choice, but if we
were to do that now, existing defconfigs that previously used openssl
(the first item in the choice) would now default to non crypto, which is
not so nice. So we add the new option last in the choice.

Each crypto backend option is used in a conditional block, each of which
default to disabling said backend. So, selecting none will indeed
disable all.

We can now drop the blind intermediate option that would hide the choice
when no backend library was available; there will now always be at least
the none option in the choice, so we need not hide it.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Julien Grossholtz <julien.grossholtz@openest.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: dependency documentation updates

Update dependency documentation to detail the order-only relationship
associated with the DEPENDENCIES variable.  See the thread at [1] for
details.

[1] http://lists.busybox.net/pipermail/buildroot/2019-October/262685.html

Signed-off-by: Dan Walkes <danwalkes@trellis-logic.com>
[yann.morin.1998@free.fr: indentation & slight rephrasing]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

libcurl: add wolfssl as an option for TLS

Libcurl recipe allows selecting between various TLS backends. Users can
already select between several options but WolfSSL was missing. WolfSSL
is an efficient TLS library, it supports TLS 1.3 and is used in many
embedded systems.

Add WolfSSL to libcurl "SSL/TLS library to use" choice list when WolfSSL
package is enabled. When selected in the list, use libcurl
--with-wolfssl configure option. Explicitly set --without-wolfssl
when it is not selected.

Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/nitrogen*: bump kernel version to 4.14.x_2.0.0_ga

Also add Nitrogen8M SOM device trees.

Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

DEVELOPERS: add Lothar Felten as contact for BeagleBone defconfigs

Lothar added the beaglebone and beaglebone_qt5 defconfigs, and has
been regularly maintaining them, so it makes sense to have him listed
as a contact for those two defconfigs.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

DEVELOPERS: add Theo Debrouwere as contact for beagleboardx15_defconfig

Theo added this defconfig in 2016, and is listed as the contact for
the pugixml package, so it probably makes sense to have him listed as
a contact for the beagleboardx15_defconfig as well.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

DEVELOPERS: add Masahiro Yamada as contact for arm_foundation_v8_defconfig

Masahiro is the last person who made significant changes to this
defconfig, so let's add him as a contact for it, so that he receives
notifications of build failures and gets Cc'ed on patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

DEVELOPERS: add Nicholas Sielicki as contact for galileo_defconfig

Nicholas was the most recent person to make significant changes to the
galileo_defconfig, so let's add him as a contact for this defconfig,
so that he receives notification of build failures and gets Cc'ed on
patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Nicholas Sielicki <sielicki@yandex.com>
Cc: Ray Kinsella <ray.kinsella@intel.com>
Cc: Padraig James Connolly <padraig.connolly@intel.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

DEVELOPERS: add Joao Pinto as contact for snps_aarch64_vdk_defconfig

Joao added this defconfig a while ago, and is still active
contributing to Buildroot, so let's add him as the contact for this
defconfig, so that he receives build failure notifications and gets
Cc'ed on patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

DEVELOPERS: add Julien Grossholtz as contact for ts7680_defconfig

Julien originally added this defconfig in 2017, so let's add him as a
contact for it, so that he receives build failure notifications and is
Cc'ed on patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Julien Grossholtz <julien.grossholtz@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libfreeimage: bump version to 3.18.0

Release notes:
http://freeimage.sourceforge.net/news.html

Removed patches
0003-LibWebP-fix-compilation-issue-with-GCC-5.x-C-11.patch
0004-fix-gcc-6.patch
0005-Manage-powf64-with-glibc.patch
because upstream added updated version of various dependencies.

Added upstream patch to fix big endian build.
Added md5 & sha1 hashes provided by upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/avro-c: fix build without C++

Fixes:
 - http://autobuild.buildroot.org/results/135e246aa70f28c6b9aea5fd6b0eb9c7b45ebfe7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/alsamixergui: cleanly fix build against fltk and newer alsa-libs

We have an existing patch to configure.in that chains the test to find
fltk (supposedly because a symbol of fltk got renamed sometime in the
past). By doing so, this chaining breaks the build when configure later
checks for the alsa libraries.

This is because chaining calls to AC_CHECK_LIBS() one in the other would
be expanded in such a way that internal functions, like ac_fn_c_try_link,
would get defined after being called, which results in configure failures
(see new bundled patch).

So, we change configure to use AC_SEARCH_LIBS() instead, which allows us
to memorise the result of each test, and we only fail when both tests
failed.

We can now drop the ac_cv overrides we had.

Incidentally, this also fixes detection of newer alsa-libs, where
atopology functions were offloaded to their own separate library:
    https://github.com/alsa-project/alsa-lib/commit/75d393a563efb578c79364a277087c6326267f52

Fixes:
    http://autobuild.buildroot.org/results/564c1561e83e0c064f3859d25e68dec96640e060

(Note: upstream has been basically dead for at least 15 years now, so we
did not even try to submit the patch there...)

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iputils: fix static build with libidn2

Fixes:
 - http://autobuild.buildroot.org/results/82d4738711a009959436fa419bd78c7a9540d33e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tesseract-ocr: bump to version 4.1.1

Also removed one patch that was merged upstream

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xvisor: unconditionally disable SSP

Fixes:

- http://autobuild.buildroot.net/results/5de37d3da17ca5cb17c0113d942ce8c22c0074e0
- http://autobuild.buildroot.net/results/41b00d95ec4eb851abceaa7919aa1c533d4f16e8
- http://autobuild.buildroot.net/results/119e22e8b03991ab9196e428a131f5a8ae2a2b2f

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/atop: bump to version 2.5.0

./utils/test-pkg --package atop --all
44 builds, 5 skipped, 0 build failed, 0 legal-info failed

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/sdl_mixer: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/sdl_mixer: add host-pkgconf dependency

host-pkgconf is needed to find libmodplug

Fixes:
 - http://autobuild.buildroot.org/results/83f378d9d01424678006434bb1e4a49cf4131fdf

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libressl: move config options

As we've recently done for libopenssl (openssl, the original),
move the libressl option to a libressl-specific Config.in.

The gain is minimal at best, but this is mostly for symetry with
libopenssl.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libopenssl: move options

Since e3159cad71 (package/libopenssl: move target arch selection
to Config.in), we have a Config.in that contains a few options to
configure libopenssl (openSSL, the original).

As such, it makes sense to move the remaining options there too.

We also move the condition there, mimicking what is done for the
external toolchains' options too.

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/google-breakpad: fix build on modern hosts

Since glibc 2.30, a tgkill() function is exposed by the C library, but
google-breakpad has its own internal definition of it, which now
conflicts. This causes build failures on modern build machines (when
building google-breakpad for the host).

This commit adds a patch that simply renames the internal tgkill()
function to BreakpadTgkill() to avoid the naming conflict.

We do that instead of a configure.ac change to avoid having to
autoreconf this package, and because the fix is anyway not
upstreamable as upstream simply dropped the internal tgkill()
implementation, but using that would break building google-breakpad on
older systems.

Fixes:

  http://autobuild.buildroot.net/results/bc2ae827b830d23094c8b70e5b34911d060295a3/ (host)
  http://autobuild.buildroot.net/results/21257e5a87f41487c6bf4db4e15ce49f1af1ac1e/ (target)

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/i2pd: bump to version 2.29.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libcdio-paranoia: bump to version 10.2+2.0.1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/bitcoin: needs threads

Commit 656fc50b51c03891d34471fd39003355678f7fde added bitcoin without
adding the threads dependency from boost

Fixes:
 - http://autobuild.buildroot.org/results/8e824314d35e12678023f32650a90539a72c9bab

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/wf111: update the upstream URL in Config.in

Update the upstream URL in the help text in Config.in. This
addresses an intermittent 'Invalid(404)' URL status in the
package stats web page output.

Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
[yann.morin.1998@free.fr: use an even more specific home page]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/beaglebone_qt5: don't use custom post-image script

Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.

Use a post-build script to copy uEnv.txt to BINARIES_DIR, as made for
beaglebone.

Drop the post-image script.

Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/beaglebone_qt5: bump kernel and U-Boot, add weston

- Use the same kernel repository and version as configs/beaglebone
- Rename kernel fragment file
- Update U-Boot to 2019.07
- Select weston and qt5wayland
- Select host-uboot-tools with FIT support, required to create the
  images.

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5/qt5base: support ti-sgx-libgbm

qt5 configure options: add ti-sgx-libgbm as GBM backend

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ti-sgx-{km, um, demos}: bump to latest TI version

ti-sgx-um

- Bump the version that matches TI SDK 06.00.00.07 plus one pull request
  that updates the EGL/GLES headers required to build qt5base.
- Rewrite the init script, following the current template and using the
  pvrsrvctl command (pvrsrvinit does not exit anymore).
- Remove powervr.ini, no longer used in the TI SDK.
- Select and add a dependency on wayland, or else packages that link to
  libEGL (e.g. cairo) fail to link due to a missing libwayland-server.
- Update license file name.

ti-sgx-demos

- Bump the version that matches TI SDK 06.00.00.07 plus one pull request
  (matching ti-sgx-um).

ti-sgx-km

- Bump the version that matches TI SDK 06.00.00.07.
- Remove stray empty lines.
- Fix license file path.

All packages

- Use HTTP to clone Git repositories.
- Update URL in Config.in files, pointing to cgit and using HTTPS.
- Add hashes for all license files.

The buildroot package only supports the target am335x. Support for other
boards can be added by adding menu entries to select the correct target
product.

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[Thomas:
 - add missing depends on BR2_PACKAGE_HAS_UDEV from Config.in,
   inherited from ti-sgx-libgbm]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ti-sgx-libgbm: new package

A custom ti version of libgbm for SGX graphics accelerator, required by
the binary libraries of the ti-sgx-um package.

Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[Thomas:
 - fix LICENSE variable, as noticed by Yegor
 - fix alphabetic ordering in package/Config.in
 - add missing select BR2_PACKAGE_LIBDRM in Config.in, and the
   corresponding dependencies
 - add missing depends on BR2_PACKAGE_HAS_UDEV in Config.in
 - use gbm.h as license file, instead of extracting the first 26 lines
   of the header file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gnupg: fix TAR path in gpg-zip script

gnupg installs a shell script called gpg-zip, which contains a
reference to the 'tar' program. Unfortunately, the location of the tar
program is determined at build time, and is therefore incorrect on the
target. This causes runtime issues, but also potentially leaks some
host paths into the target, causing BR2_REPRODUCIBLE=y failures.

gnupg has a --with-tar option, but it doesn't work properly as the
implementation of the GNUPG_CHECK_USTAR m4 macro in m4/tar-ustar.m4 is
incomplete:

 - If --with-tar is passed, AC_PATH_PROG is not called, so the TAR
   variable is not defined and AC_SUBST([TAR]) is not called, so the
   @TAR@ replacement in tools/gpg-zip.in is replaced by the empty
   string.

 - If --with-tar is passed, the check that this tar version support
   the ustar format is not executed, so the HAVE_USTAR automake
   conditional is never defined. There is unfortunately no way to
   determine if the target tar supports ustar or not, but since even
   the Busybox variant apparently does, we can probably assume all tar
   versions that Buildroot can build support the ustar format.

Fixing this logic is a bit cumbersome, gnupg 1.4.x is not really
maintained anymore and fixing the logic would require an AUTORECONF =
YES.

So we just opt with a very simple solution: replace TAR=something by
TAR=/bin/tar, through a post-install target hook. We only do this if
gpg-zip is installed, since its installation is optional. Note that
the logic is still not ideal, because the installation (or not) of
gpg-zip depends on whether the system/host tar has ustar format or
not.

Fixes the gpg-zip reproducibility issue reported in:

  http://autobuild.buildroot.net/results/d1c/d1c5ad34ba928edfbb5901eb936c7e4457cc9083//diffoscope-results.txt

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/wireshark: bump to version 3.2.0

- Remove patches (already in version)
- Add patch to fix static build with pcap by reverting an upstream
  commit. This patch has been sent upstream and there is already some
  comments on it. However, upstream does not seem to really care/test
  static builds. So, perhaps an easier road would to add a dynamic
  library dependency on wireshark instead of fixing things again and
  again each time wireshark is bumped...
- Add mandatory speexdsp dependency to avoid using internal one when
  building wireshark or sharkd:
  https://github.com/wireshark/wireshark/commit/186f985793cceb7d7222955987df72ab5a82beeb
- Disable -Werror (it is now enabled by default)
- Add brotli optional dependency:
  https://github.com/wireshark/wireshark/commit/9ce60b173bf17b7d20695d9dc1de050989019664

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fluid-soundfont: new package

FluidR3 is the third release of Frank Wen's pro-quality GM/GS
soundfont. The soundfont has lots of excellent samples, including all
the GM instruments along side with the GS instruments that are
recycled and reprogrammed versions of the GM presets.

This package contains Fluid General Midi (GM) soundfont in soundfont
2.0 (.sf2) format.

This soundfont can be used with a software synthesizer, like
FluidSynth.

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/ecryptfs-utils: add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>