git.libre-soc.org Git - mesa.git/log

radv/query: handle multiview queries properly. (v3)

For multiview we need to emit a number of sequential queries
depending on the view mask.

This avoids dEQP-VK.multiview.queries.15 waiting forever
on the CPU for query results that are never coming.

We only really want to emit one query,
and the rest should be blank (amdvlk does the same),
so we emit begin/end pairs for all the others except
the first query.

v2: fix tests
v3: split out patch.

Fixes: dEQP-VK.multiview.queries*
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radv/query: split out begin/end query emission

This just splits out the begin/end query hw emissions,
it makes it easier to add multiview support for queries.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radv/multiview: mark layer_input if we have input attachments.

This fixes:
dEQP-VK.multiview.input_attachments*

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

anv/pipeline: set active_stages early

Since the intermediate states of active_stages are not used,
i.e. active_stages is read only after all stages were set into it,
just set its value before compiling the shaders.

This will allow to conditionally run certain passes based on what
other shaders are being used, e.g. a certain pass might only be
applicable to the vertex shader if there's no geometry or tessellation
shader being used.

v2: Use vk_to_mesa_shader_stage. (Lionel)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv/pipeline: fail if TCS/TES compile fail

v2: Add Fixes tag. (Lionel)

Fixes: e50d4807a35e679 ("anv: Compile TCS/TES shaders.")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

main/program_binary: In ProgramBinary set link status as LINKING_SKIPPED

This change allows the disk shader cache to work with programs loaded
with ProgramBinary. Drivers check for LINKING_SKIPPED, and if set,
then they try to use the shader cache.

Since the program loaded by ProgramBinary is similar to loading the
shader from the disk cache, this is probably more appropriate.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

i965: Allow disk shader cache usage with LINKING_SUCCESS status

Currently, we only look in the disk shader cache if we see that the
shader program is in the cache during the link step.

If the shader cache entry isn't found during the program link, there
are still some (fairly unlikely) scenarios where later it might be
useful to search the cache for gen binary programs.

1. If the cache evicts the serialized glsl cache, there might still be
   valid gen program entries in the disk cache.

2. If two applications are running in parallel, then it is possible
   that one may write out the cached gen program item which the other
   application can then make use of.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl/serialize: Save shader program metadata sha1

When the shader cache is used, this can be generated. In fact, the
shader cache uses this sha1 to lookup the serialized GL shader
program.

If a GL shader program is restored with ProgramBinary, the shaders are
not available, and therefore the correct sha1 cannot be generated. If
this is restored, then we can use the shader cache to restore the
binary programs to the program that was loaded with ProgramBinary.

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

glsl: Remove api_enabled tracking for transform feedback

We used this to prevent usage of the disk shader cache when transform
feedback was enabled via the GL API. This is no longer used.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105444
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

i965: Allow disk shader cache usage with transform feedback

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105444
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

glsl/shader_cache: Allow shader cache usage with transform feedback

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105444
Suggested-by: Timothy Arceri <tarceri@itsqueeze.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

scons: need to split CC or things might fail

We've seen this fail internally.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

i965: Add INTEL_DEBUG stages support for disk shader cache

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

radv: handle exporting view index to fragment shader. (v1.1)

The fragment shader was trying to read this, but nothing
was exporting it from the vertex shader. This handles
it like the prim id export.

Fixes:
dEQP-VK.multiview.secondary_cmd_buffer.*
dEQP-VK.multiview.index.fragment_shader.*

v1.1: updated to use 0x1 (Samuel)

Fixes: e3265c10c89 (radv: Implement multiview draws.)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

st/nine: Fix non inversible matrix check

There was a missing absolute value when
checking if the determinant was big enough.

Fixes: https://github.com/iXit/Mesa-3D/issues/292
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
CC: "17.3 18.0" <mesa-stable@lists.freedesktop.org>

st/nine: Fixes warning about implicit conversion

Makes the conversion explicit.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=102542
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
CC: "17.3 18.0" <mesa-stable@lists.freedesktop.org>

st/nine: Fix bad tracking of vs textures for NINESBT_ALL

Stateblocks with NINESBT_ALL should track all textures.
For better performance they have a faster path which
copies all the required.

This path was only tracking ps textures.

Fixes: https://github.com/iXit/Mesa-3D/issues/303
Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
CC: "17.3 18.0" <mesa-stable@lists.freedesktop.org>

st/nine: Fix bad tracking of bound vs textures

An incorrect formula was used to compute bound_samplers_mask_vs.
Since s is above always 8 for vs and the variable is encoded on 8 bits,
it was always 0.
This resulted in commiting the samplers every call when
there was at least one texture read in the vs shader.

Signed-off-by: Axel Davy <davyaxel0@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>

radv: make vk_format_description structures static

No need to bother the linker about them.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: fix stale comment in generated vk_format_table.c

It seems to be a leftover from u_format_table.py.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

anv: Silence warning about heap_size.

We only get VK_SUCCESS if it was initialized, but apparently my compiler
doesn't track that far.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965: Silence compiler warning about promoted_constants.

We only have a cfg != NULL if we went through one of the paths that set
it, but my compiler doesn't figure that out.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 6411defdcd6f ("intel/cs: Re-run final NIR optimizations for each SIMD size")

anv: Silence compiler warnings about uninitialized bind_offset.

This is a legitimate warning: if anv's blorp_alloc_binding_table() throws
an error from anv_cmd_buffer_alloc_blorp_binding_table(), we silently
continue to use this undefined value. The rest of this code doesn't seem
very allocation-error-proof, though, either.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel/compiler: Use gen_get_device_info() in test_eu_validate

Previously the unit test filled out a minimal devinfo struct. A previous
patch caused the test to begin assert failing because the devinfo was
not complete. Avoid this by using the real mechanism to create devinfo.

Note that we have to drop icl from the table, since we now rely on the
name -> PCI ID translation done by gen_device_name_to_pci_device_id(),
and ICL's PCI IDs are not upstream yet.

Fixes: f89e735719a6 ("intel/compiler: Check for unsupported register sizes.")
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

intel: Add cfl to gen_device_name_to_pci_device_id()

Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

meson+dri3: allow building against older xcb (v3)

Similar to previous patch, make xcb 1.13 optional.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

dri3: allow building against older xcb (v3)

I'm not sure everyone wants to be updating their dri3 in a forced
march setting, this allows a nicer approach, esp when you want
to build on distro that aren't brand new.

I'm sure there are plenty of ways this patch could be cleaner,
and I've also not built it against an updated dri3.

For meson I've just left it alone, since if you are using meson
you probably don't mind xcb updates, and if you are using meson
you can fix this better than me.

v3: just don't put a version in for dri3/present without
modifiers, should allow building with 1.11 as well

(feel free to supply meson followups)

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

r600: consolidate PIPE_BIND_SHARED/SCANOUT handling

(Ported from radeonsi commit f70f6baaa3bb0f8b280ac2eaea69bbffaf7de840)

Allows cached BOs to be reused in more cases.

Bugzilla: https://bugs.freedesktop.org/105171
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>

intel/compiler: Check for unsupported register sizes.

Make sure we don't emit 64 bit types if the hardware doesn't support
them.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

loader: Include include/drm-uapi in the autotools build

We're already including it in the meson build. This fixes build issues
on systems which have a drm_fourcc.h that doesn't have modifiers.

Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl/android: Implement the eglSwapinterval for Android.

Implement the eglSwapinterval for Android platform to
enable the async mode for some GFX benchmarks such as
Daimler C217, CityBench.

Results of the dEQP-EGL.*swap_interval tests

'dEQP-EGL.functional.query_config.get_config_attrib.max_swap_interval'..
'dEQP-EGL.functional.query_config.get_config_attrib.min_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_only.max_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_only.min_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_and_sort.max_swap_interval'..
'dEQP-EGL.functional.choose_config.simple.selection_and_sort.min_swap_interval'..
'dEQP-EGL.functional.negative_api.swap_interval'..

Test run totals:
   Passed:        7/7 (100.0%)
   Failed:        0/7 (0.0%)
   Not supported: 0/7 (0.0%)
   Warnings:      0/7 (0.0%)

Signed-off-by: Zhongmin Wu <zhongmin.wu@intel.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
[Emil Velikov: polish inline comment, add dEQP stats, s/dpy/disp/]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

st/mesa: simplify st_init_limits() via tgsi_processor_to_shader_stage

Reuse the tgis helper and remove a bunch of duplicated code.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

tgsi: move tgsi_processor_to_shader_stage() to a header

This way we can utilise it with later patches.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

egl/dri2: move wayland header inclusion where applicable

Instead of indirectly pulling the wayland headers everywhere, use
forward declarations and #include only as needed.

Should effectively fix build errors like the following:

make[5]: Entering directory
'/.../src/gallium/state_trackers/omx/tizonia'
CC h264dprc.lo
In file included from h264dprc.c:45:0:
.../src/egl/drivers/dri2/egl_dri2.h:47:10: fatal error:
wayland/wayland-egl/wayland-egl-backend.h: No such file or directory
#include "wayland/wayland-egl/wayland-egl-backend.h"

Cc: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Tested-by: Andy Furniss <adf.lists@gmail.com>

vulkan/wsi/x11: correct DRI3 version in comment

During development the version was bumped, yet the comment did not get
an update.

Fixes: c80c08e2260 ("vulkan/wsi/x11: Add support for DRI3 v1.2")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

vulkan/wsi/x11: use ARRAY_SIZE where applicable

Use the handy macro instead of hard coded numbers.

Fixes: c80c08e2260 ("vulkan/wsi/x11: Add support for DRI3 v1.2")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

mesa: RGB9_E5 invalid for CopyTexSubImage* in GLES

According to OpenGL ES 3.2, section 8.6, CopyTexSubImage* should return
an INVALID_OPERATION if the internalformat of the texture is RGB9_E5.

This fixes
dEQP-GLES31.functional.debug.negative_coverage.*.copytexsubimage2d_texture_internalformat.

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

etnaviv: remove superfluous \n from DBG(..) callers

The DBG(..) macro appends a \n already so there is no
need to do it twice.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>

radv: run nir_opt_move_load_ubo

Polaris10:
SGPRS: 108560 -> 107856 (-0.65 %)
VGPRS: 74576 -> 74520 (-0.08 %)
Spilled SGPRs: 7375 -> 7113 (-3.55 %)
Code Size: 4273464 -> 4274364 (0.02 %) bytes
Max Waves: 9434 -> 9446 (0.13 %)

Vega10:
Totals from affected shaders:
SGPRS: 108264 -> 107576 (-0.64 %)
VGPRS: 69068 -> 69000 (-0.10 %)
Spilled SGPRs: 7221 -> 6959 (-3.63 %)
Code Size: 3800796 -> 3801496 (0.02 %) bytes
Max Waves: 10687 -> 10709 (0.21 %)

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

nir: add nir_opt_move_load_ubo() optimization pass

This pass moves load UBO operations just before their first use,
loosely based on nir_opt_move_comparisons.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

radv: drop geometry stride user sgpr.

This removes the other geometry specific user sgpr.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: get rid of geometry user sgpr for num entries.

This drops one of the geometry specific user sgprs,
we can work this out at compile time.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: migrate lds size calculations to shader gen.

This moves the lds_size calcs into the shader so we have all
the size stuff in one file.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: drop scanning the tess shader in the nir code.

This drops the now unneeded scanning and results in favour
of the ones in the info.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: use num_patches output from tcs shader.

Instead of recalculating the value, use the shader calculated value.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/tess: remove last chunk of tess sgprs

This removes the last TES-specifc user sgpr.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: pass num_patches to tes from tcs

TES needs num_patches to do some of the calculations.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: drop tess offchip layout for tcs.

This removes the last TCS specific user sgpr.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: drop tcs_out_offsets

Move all calculations to shader generation.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: drop tcs_out_layout

Move all calculations to shader generation.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/tess: drop tcs_in_layout setting completely.

Inline all calcs at shader creation.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: drop ls_out_layout const.

We can precalculate input_vertex_size at compile time.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/shader_info: start gathering tess output info (v2)

This gathers the ls outputs written by the vertex shader,
and the tcs outputs, these are needed to calculate certain
tcs parameters.

These have to be separate for combined gfx9 shaders.

This is a bit pessimistic compared to the nir pass,
as we don't work out the individual slots for tcs outputs,
but I actually thing it should be fine to just mark the whole
thing used here.

v2: move to radv, handle clip dist (Samuel),
handle compacts and patchs properly.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: migrate unique index info shader info (v2)

This just moves this function to an inline so the shader_info
pass can use it.

v2: use inline (Samuel)

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Revert "mesa: do not trigger _NEW_TEXTURE_STATE in glActiveTexture()"

This reverts commit f314a532fdc7af8381586144d2631d9968331f05.

This appears to introduce some blinking textures in UT2004. Not
sure exactly what's the root cause because we don't have much
information about the issue.

Anyway, this was just a micro optimization that actually breaks,
at least, one app almost one year later.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105436
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

anv: silence unused variable warning

Fixes: 59b0ea0c748 ("anv: Stop returning VK_ERROR_INCOMPATIBLE_DRIVER")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

i965: silence unused function warning

[123/227] Compiling C object 'src/mesa/drivers/dri/i965/libi965_gen110@sta/genX_blorp_exec.c.o'.
../src/mesa/drivers/dri/i965/genX_blorp_exec.c:99:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

anv: silence unused function warning on gen11

[84/227] Compiling C object 'src/intel/vulkan/libanv_gen110@sta/genX_blorp_exec.c.o'.
../src/intel/vulkan/genX_blorp_exec.c:68:1: warning: ‘blorp_get_surface_base_address’ defined but not used [-Wunused-function]
blorp_get_surface_base_address(struct blorp_batch *batch)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>

meson: fix pipe-loaders after omx changes

with_gallium_omx used to be a boolean, but now it's a string. That means
it needs to be compared to 'disabled' instead of false.

CC: Rob Clark <robdclark@gmail.com>
Fixes: 34e852d5b50772199797ea839fc8d6b3805633ff
("meson: Re-add auto option for omx")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Tested-by: Rob Clark <robdclark@gmail.com
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: require amdgpu >= 2.4.91

the meson equivalent of f8773edb0a0cf5ff885cd3494717323983eedeed

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

configure.ac: require libdrm_amdgpu 2.4.91

Since 2.4.90 is problematic, just ask for the next version.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

configure.ac: blacklist libdrm 2.4.90

Cc: 18.0 17.3 17.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

radv: dump LLVM IR when a hang is detected

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: record LLVM IR when debugging shaders

If AMD_shader_info or RADV_TRACE_FILE is used we might need to
keep trace of LLVM IR.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: add dump_shader to the NIR compiler options

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: pass the NIR compiler options to ac_compile_llvm_module()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: print some information when RADV_TRACE_FILE is set

Just to be sure all options are enabled when trying to generate
a hang report.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: only display options that are enabled

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

mailmap: Use Eric Engestrom's personal email address

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>

spirv/radv: add AMD_gcn_shader capability, remove current extensions

So now, during spirv_to_nir, it uses the capability instead of the
extension. Note that we are really doing here is treating
SPV_AMD_gcn_shader as other supported extensions. SPV_AMD_gcn_shader
is not the first SPV extension supported. For example, the capability
draw_parameters infers if the extension SPV_KHR_shader_draw_parameters
is supported or not.

This could be seen as counter-intuitive, and that it would be easier
to define which extensions are supported, and based our checks on
that, but we need to take into account that some capabilities are
optional from core, and others came from new extensions.

Also this commit would make the implementation of ARB_spirv_extensions
easier.

v2: AMD_gcn_shader capability renamed to gcn_shader (Daniel Schürmann)

Reviewed-by: Daniel Schürmann <daniel.schuermann@campus.tu-berlin.de>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

spirv: update arguments for vtn_nir_alu_op_for_spirv_opcode()

We don't need anymore the source and destination's data type, just
their bitsize.

v2:
- Use glsl_get_bit_size () instead (Jason).

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

spirv: fix the translation of SPIR-V conversion opcodes to NIR

There are some SPIRV opcodes (like UConvert and SConvert) have some
expectations of the output that doesn't depend on the operands
data type. Generalize the solution of all of them.

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

vbo: Correctly handle source arrays in vbo_split_copy.

The original approach did optimize away a bit too many fields.
Restablish the pointer into the original array and correctly feed that
one.

Reviewed-by: Brian Paul <brianp@vmware.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105471
Fixes: 64d2a20480547d5897fd9d7b8fd306f2625138cb
mesa: Make gl_vertex_array contain pointers to first order VAO members.
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>

sched.h needs to be imported on Darwin/OSX targets.

sched_yield is used but the include reference on Darwin is missing. This patch
conditionally guards on Darwin/OSX to import sched.h first.

Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

Add processor topology calculation implementation for Darwin/OSX targets.

The implementation for bootstrapping SWR on Darwin targets is based on the Linux version.
Instead of reading the output of /proc/cpuinfo, sysctlbyname is used to determine the
physical identifiers, processor identifiers, core counts and thread-processor affinities.

With this patch, it is possible to use SWR as an alternate renderer on OSX to softpipe and
llvmpipe.

Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

virgl: resize resource bo allocation if we need to.

This fixes an illegal command buffer on the host seen with
piglit arb_internalformat_query2-max-dimensions

Signed-off-by: Dave Airlie <airlied@redhat.com>

nv50,nvc0: Support BGRX1010102 and RGBX1010102 for sampling.

Add them as usable for textures, so they can be used by
Wayland drm in 10 bpc mode and for X11 compositing under
GLX and EGL. We need these formats to be supported at
least for sampling, otherwise GLX_texture_from_pixmap
and the equivalent EGL image extension won't work with
X11 drawables of depth 30 and just display an all black
window.

Do not expose these formats as renderable, and thereby
not as a fbconfig/EGLConfig/Visual, as NVidia hw does
not support 10 bpc unorm formats without alpha channel.

Tested under X11 + GLX/EGL + DRI2/DRI3 for compositing,
and under Wayland+Weston drm backend with a Tesla and
Pascal gpu.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

util: Use set_foreach instead of rolling our own

This follows the same pattern as in the hash_table.

Reviewed-by: Jason Ekstrand <jason.ekstrand at intel.com>

glsl: Use hash table cloning in copy propagation

Walking the whole hash table, inserting entries by hashing them first
is just a really bad idea. We can simply memcpy the whole thing.

V2: Remove leftover creation of acp in two places

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

util: Implement a hash table cloning function

V2: Don't rzalloc; we are about to rewrite the whole thing (Vladislav)

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

st/mesa: Factorize duplicate code in st_BlitFramebuffer()

Signed-off-by: Marek Olšák <marek.olsak@amd.com>

autotools: add -I/src/egl to tizonia

This fixes the following build breakage:

make[5]: Entering directory
'/mnt/sdc1/Gits/mesa/src/gallium/state_trackers/omx/tizonia'
   CC       h264dprc.lo
In file included from h264dprc.c:45:0:
../../../../../src/egl/drivers/dri2/egl_dri2.h:47:10: fatal error:
wayland/wayland-egl/wayland-egl-backend.h: No such file or directory
  #include "wayland/wayland-egl/wayland-egl-backend.h"
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

meson got the same fix in 7598dedfde49391564cdb3d355e7bd98e1880782.

Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>

Revert "Add processor topology calculation implementation for Darwin/OSX targets."

This reverts commit de0d10db93d85de79c7b4451c4851ace2976f8f4.

This breaks the build on at least Linux, probably other non-apple
platforms.

Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Revert "sched.h needs to be imported on Darwin/OSX targets."

This reverts commit 9dc5063262d0a5130cf0723a33079f3fd17560c3.

This breaks the build on at least Linux, probably other non-apple
platforms.

Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

compiler: int8/uint8 support

OpenCL kernels also have int8/uint8.

v2: remove changes in nir_search as Jason posted a patch for that

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>

radv: Fix CmdCopyImage between uncompressed and compressed images

From the spec:

    "When copying between compressed and uncompressed formats the
     extent members represent the texel dimensions of the source
     image and not the destination."

However, as per 7b890a36, we must still use the destination image type
when clamping the extent so that we copy the correct number of layers
for 2D to 3D copies.

Fixes: 7b890a36 "radv: Fix vkCmdCopyImage for 2d slices into 3d Images"
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: fix vkGetDeviceQueue2() when create flags don't match

This fixes CTS:
dEQP-VK.api.device_init.create_device_queue2_unmatched_flags

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>

spirv: Handle doubles when multiplying a mat by a scalar

The code to handle mat multiplication by a scalar tries to pick either
imul or fmul depending on whether the matrix is float or integer.
However it was doing this by checking whether the base type is float.
This was making it choose the int path for doubles (and presumably
float16s).

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/entrypoints: VkGetDeviceProcAddr returns NULL for core instance commands

af5f2322d0c64 addressed this for extension commands, but the spec mandates
this behavior also for core API commands. From the Vulkan spec,
Table 2. vkGetDeviceProcAddr behavior:

device     pname                            return
----------------------------------------------------------
(..)
device     core device-level command        fp
(...)

See that it specifically states "device-level".

Since the vk.xml file doesn't state if core commands are instance or
device level, we identify device level commands as the ones that take a
VkDevice, VkQueue or VkCommandBuffer as their first parameter.

Fixes test failures in new work-in-progress CTS tests.

Also see the public issue:
https://github.com/KhronosGroup/Vulkan-LoaderAndValidationLayers/issues/2323

v2:
  - Include reference to github issue (Emil)
  - Rebased on top of Vulkan 1.1 changes.

v3:
  - Remove the not in the condition and switch the then/else cases (Jason)

Reviewed-by: Emil Velikov <emil.velikov@collabora.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

anv/entrypoints: dispatches to VkQueue are device-level

v2:
- Add trampoline functions (Jason)
- Add an assertion for unhandled trampoline cases

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radv: drop assert on bindingDescriptorCount > 0

The spec is pretty clear that this can be 0, and that it operates
as a reserved binding.

Fixes:
dEQP-VK.binding_model.descriptor_update.empty_descriptor.uniform_buffer

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

sched.h needs to be imported on Darwin/OSX targets.

sched_yield is used but the include reference on Darwin is missing. This patch
conditionally guards on Darwin/OSX to import sched.h first.

Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>

Add processor topology calculation implementation for Darwin/OSX targets.

The implementation for bootstrapping SWR on Darwin targets is based on the Linux version.
Instead of reading the output of /proc/cpuinfo, sysctlbyname is used to determine the
physical identifiers, processor identifiers, core counts and thread-processor affinities.

With this patch, it is possible to use SWR as an alternate renderer on OSX to softpipe and
llvmpipe.

Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>

r600: fix abs for op3 sources

If a src was referencing the same temp as the dst, the per-component
copy code didn't work.
e.g.
  cndge r0.xy, r0.xx, |r2|, r3
got expanded into
  mov  r12.x, |r2|
  cndge r0.x, r0.x, r12, r3
  mov  r12.y, |r2|
  cndge r0.y, r0.x, r12, r3
hence for the second cndge r0.x was mistakenly the previous cndge result.
Fix this by doing all the movs first, so there's no bogus alu.last in between.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=102905
Tested-by: <iive@yahoo.com>
Reviewed-by: Dave Airlie <airlied@gmail.com>

radv: mark all tess output for an indirect access.

If a shader does a tcs store with an indirect access, we
were only marking the first spot as used. For indirect access
we always now mark all slots used by the variable.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105464
Fixes: 94f9591995 (radv/ac: add support for TCS/TES inputs/outputs.)
Signed-off-by: Dave Airlie <airlied@redhat.com>

ac/nir: pass the nir variable through tcs loading.

I was going to have to add another parameter to this monster,
so we should just pass the nir_variable in, I can't find any
reason this would be a bad idea.

This needed for the next fix.

Fixes: 94f9591995 (radv/ac: add support for TCS/TES inputs/outputs.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: get correct offset into LDS for indexed vars.

This seems more correct to me, since if we have an array
of floats they'll be vec4 aligned, and if we do af[2],
we want the const index to increase by 2 slots in the non
compact case.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105464
Fixes: 94f9591995 (radv/ac: add support for TCS/TES inputs/outputs.)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

nir: lower_load_const_to_scalar fix for 8/16b types

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

Update the documentation for meson

Meson is pretty well tested and works in most configurations now, so we
can remove the warning about it being unsuited for actual use.

It's also worth documenting that meson 0.42.0 or greater is required.

v2: - Minor rewording of supported platforms as suggested by Emil
- Add two missing tags as reported by xmllint --html

Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com> (v1)
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)