grep: bump to version 2.16

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iftop: bump to version 1.0pre3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

haveged: bump to version 1.8

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

squid: bump to version 3.4.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gpsd: bump git snapshot

The 3.11 release of gpsd still hasn't materialised. For now, bump the Git
snapshot again, removing local patches that have now been merged upstream.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

zmqpp: fix license information

Commit 85d28790cdbaa68179632aca7e5708fead7614f0 bumped the zmqpp Git
snapshot to 30d72d95f2cfdf9c5cedfd56747f549d65e65847.

However, the zmqpp licensing has changed (from MIT to
"LGPLv3+ with exceptions"), and the license file names have changed.

Fixes autobuild failures such as the following.

  http://autobuild.buildroot.net/results/a60/a6029fcb670cd27687a68cb96f0f14f5c13caf47

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wmctrl: fix comment (typo and visibility)

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: remove the empty trailing line(s)

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imagemagick: bump to version 6.8.8-1

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wmctrl: new package

Provides command line access to almost all the features defined in
the EWMH specification. It can be used, for example, to get
information about the window manager, to get a detailed list of
desktops and managed windows, to switch and resize desktops, to
make windows full-screen, always-above or sticky, and to activate,
close, move, resize, maximize and minimize them.

[Thomas:
 - fixed license, which is GPLv2+, not GPLv2
 - fixed wrapping of the Config.in help text
 - removed Config.in comment related to MMU dependency.]

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: fix uboot subdirectory in example layout

If U-Boot patches are nested under BR2_GLOBAL_PATCH_DIR, then the
subdirectory should be called "uboot", and not "u-boot".

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: extend usage of github download helper

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: fix posix_fadvise() signature mismatch

Fixes
http://autobuild.buildroot.net/results/79c/79cdb149d349ce9fe2dffbf53e3ff127a050ed24/.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpd: Fix broken download URL

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

zyre: bump git snapshot

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

filemq: bump git snapshot

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

czmq: bump git snapshot

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

zmqpp: bump git snapshot

Also remove a patch which is no longer required.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cppczmq: bump git snapshot

Bump the Git snapshot for the cppzmq package. The newer snapshot now
has a separate license file; update license information accordingly.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openssl: add fix for CVE-2013-6449

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Disable MIPS64 ISAs for MIPS32 targets

Currently you can select MIPS64 ISAs, like mips64 and mips64r2, for
MIPS32 targets. This is incorrect, so we disable the possibility to do
that.

Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Vicente Olivert Riera <vincent.riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

transmission: Fix build error "conflicting types for 'UTP_Write'" after version bump

fix taken from
http://www.adminsehow.com/2012/10/how-to-install-transmission-2-71-on-debian-6-0-squeeze/

compile tested on arch sh4, fixes
http://autobuild.buildroot.org/results/638/63884de929fb7339ebf44b08cb5d1ab30010666a/

should also fix powerpc
http://autobuild.buildroot.org/results/eb4/eb486228a11a9602d4bf40e771744d2b2b40508f/

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: standardise Apache licenses

Apache licenses are referred to in a variety of ways; standardise these,
choosing a form which does not contain whitespace.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dropbear: add support for custom arguments through config file

The default port 22 used by dropbear for its SSH connections is not always
desired. Dropbear accepts an option '-p' to set the port, but doing this was
not possible from the buildroot-provided init script.

One way to fix this is by adding a custom S50dropbear in a project-specific
rootfs overlay. However, this approach has the big disadvantage that bug
fixes or improvements in the default init script (i.e. in newer buildroot
releases) are not available (unless you manually port these changes each
time you upgrade buildroot).

Another solution is to modify the default init script from a
project-specific post-build script. However, this is fragile because you'd
have to sed some line but this line may change in later buildroot releases.

Yet another solution is to change the default port at build time, by
patching the options.h header file in the dropbear sources. This was
proposed with a patch [1] before, but not accepted.

This patch implements another solution, hinted from the discussion in [1]:
the default init script now sources a config file /etc/default/dropbear, in
which the user can set the variable DROPBEAR_ARGS. This is similar to the
S81named init script in the bind package. The config file would be added to
a project-specific rootfs overlay, a custom skeleton, or created from a
post-build script.
This approach has the advantage of being simple and non-intrusive, without
any code duplication or fragile script modifications.

[1] http://lists.busybox.net/pipermail/buildroot/2013-November/083165.html

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: bump to version 1.42.9

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5base: add an option to build and install examples

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lrzsz: add license info and fix typo

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

busybox 1.22.x: disable touch -h

Disable the busybox touch --no-dereference since it requires lutimes
support and breaks old toolchains that don't support it (example:
avr32). Probably nobody cares that much since it's a new feature. Fixes:
http://autobuild.buildroot.net/results/9c2/9c29379719ae5cf5800c0dcb4cf514c5dc15d9b6/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

minicom: bump to version 2.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

automake: bump to version 1.14.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcgicc: bump to version 3.2.12

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: add 1.22.x series, deprecate 1.19.x

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iozone: add fix for missing pthread_setaffinity_np()

The iozone code uses the pthread_setaffinity_np() function, but with
uClibc this function is only available when the NPTL thread
implementation is used. Some architectures, such as AVR32 and ARC do
not support the NPTL thread implementation, and therefore lack the
pthread_setaffinity_np() function.

This commit adds a patch that provides an empty implementation of
pthread_setaffinity_np() when we're using uClibc, but not with the
NPTL thread implementation. The reasoning is that there is a very high
chance that the few architectures that do not implement NPTL are
non-SMP architectures, and therefore setting the affinity is not very
useful.

In addition to this, this commit:

 * Renames the existing patch to use a sequence number, in order to
   guarantee a proper ordering when applying patches.

 * Removes the Kconfig dependency on !uClibc 0.9.31, which was
   introduced to prevent AVR32 from failing due to the
   pthread_setaffinity_np(). This conditional is no longer necessary
   due to the new patch, and the conditional was anyway not completely
   working since it was not taking into account the case of external
   toolchains.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

transmission: version bump to 2.8.2

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

civetweb: fix build for xtensa

The civetweb package bundled sqlite3 generates an object that is too large for
the xtensa default placement of literals in a dedicated section. Use
-mtext-section-literal to place literals in the text section.

Fixes
http://autobuild.buildroot.net/results/d14/d142f3ce17ab22cc39f9117c114318c1b5cadfc5/.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lmbench: fix build for xtensa

The lmbench package generates a binary that is too large for the xtensa default
placement of literals in a dedicated section. Use -mtext-section-literal to
place literals in the text section.

Fixes
http://autobuild.buildroot.net/results/afe/afe9f4550e6ac9a41e4ba338773c1d51034273f7/.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php: fix build for xtensa

The php package generates a binary that is too large for the xtensa default
placement of literals in a dedicated section. Use -mtext-section-literal to
place literals in the text section.

Fixes
http://autobuild.buildroot.net/results/a9a/a9a1063104402ec28e01560ec7c8f8a5b6d43dd5/.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

taglib: depend on zlib if appropriate

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: add support for the Blackfin 2013R1 toolchain

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: mark Microblaze external toolchains as deprecated

The Xilinx Microblaze external toolchains that we had support for are
very old, and are causing a huge number of build issues. Thanks to
Spenser Gilliland, we now have support for Microblaze in the internal
toolchain backend, and the autobuilders have been using the internal
toolchain backend since then. Therefore, it's time to deprecate those
old and unusable external toolchains.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: update Linaro AArch64 toolchains

Add Linaro AArch64 2013.10 and Linaro AArch64 2013.11, and remove
Linaro AArch64 2013.07 and Linaro AArch64 2013.08.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

toolchain-external: update Linaro ARM toolchains

Add Linaro ARM 2013.10 and Linaro ARM 2013.11, and remove Linaro ARM
2013.07 and Linaro ARM 2013.08.

The main change for those versions is the switch to eglibc 2.18.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: add Sourcery MIPS 2013.11, remove Sourcery MIPS 2012.03

This commit adds the support for the recently release Sourcery MIPS
2013.11 toolchain (gcc 4.8, gdb 7.6, glibc 2.18), and consequently
removes the support for the Sourcery MIPS 2012.03 toolchain.

While we're at it, also fix the incorrect help text related to the
MIPS64 multilib selection.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

cmake: add patch to fix Qt mkspecs detection

The FindQt4 macros that search the mkspecs directory had a bug that
prevented the mkspecs directory from being found, causing build
failures of the qjson and grantlee.

Fixes:

  http://autobuild.buildroot.org/results/75b/75b45da597c12034baad50492c0c8150dc1bf0aa/build-end.log
  http://autobuild.buildroot.org/results/3b9/3b9d022b02c4497efed178f35c069ea99a7d3eef/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

grub: add web reference that documents how to generate a splashimage

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

grub: align splashscreen handling with iso9660 code

This commit aligns the Grub handling of the splash screen with what is
done in the ISO9660 code.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

qt5webkit: depend on BR2_PACKAGE_QT5_JSCORE_AVAILABLE

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5script: depend on BR2_PACKAGE_QT5_JSCORE_AVAILABLE

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5: use a common option for JavaScriptCore dependencies

This will be used by other qt packages that contain a copy of
JavaScriptCore.

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xenomai: fix build failure when HAVE_OPEN64 is undefined

fixes: http://autobuild.buildroot.org/results/d59/d590be34637a4043c929ce615f9db504484be435/build-end.log

Upstream patch:
http://git.xenomai.org/xenomai-2.6.git/commit/?id=71345fe15f126ae3a596af309945d0af6edfbbbb

Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gstreamer: fix xtensa configure

Disable unaligned access to avoid configure run test.

Fixes
http://autobuild.buildroot.net/results/a0c/a0cca019b0b2f33b6c2be17e5a44a807bbb4dac1/.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

oprofile: disable on xtensa

Missing memory barrier definition. Fixes
http://autobuild.buildroot.net/results/df7/df797a81111fa15de9337adefca05cbac156d0b2/.

Also, add nios2 to the dependencies comment while at it.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fs/iso9660: add Grub splashscreen support

When Grub is built with splashscreen support, copy the splashscreen
image to the ISO9660 filesystem. Otherwise, disable the splashscreen
in the grub menu.lst file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

linux: enable initrd/initramfs support when cpio rootfs is chosen

When one enables the generation of a cpio archive of the root
filesystem, the most likely usage is as an initramfs for the
kernel. This commit ensures that the kernel has initramfs support when
the rootfs cpio image format is chosen.

This will for example ensure that if the user selects the ISO9660
filesystem format (which uses a cpio initramfs), the kernel will have
proper support to load and use the initramfs.

It is worth mentionning that when BR2_TARGET_ROOTFS_INITRAMFS is
enabled, then BR2_TARGET_ROOTFS_CPIO is always enabled. That's why we
move the enabling of CONFIG_BLK_DEV_INITRD from the initramfs case to
the cpio case.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

lockdev: Fix TARGET_DIR link

Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: add Sourcery ARM 2013.11, remove Sourcery ARM 2011.09

This commit adds the support for the recently release Sourcery ARM
2013.11 toolchain (gcc 4.8, gdb 7.6, glibc 2.18), and consequently
removes the support for the Sourcery ARM 2011.09 toolchain.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: do not use an initrd in iso image when using initramfs

When using initramfs built into the kernel, it is useless to put an
initrd in the iso image.  This patch makes the image to only contain
the kernel image, and also removes the initrd line from menu.lst

Signed-off-by: Thierry Bultel <thierry.bultel@wanadoo.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gstreamer1: fix xtensa configure

Disable unaligned access to avoid configure run test.

Fixes
http://autobuild.buildroot.net/results/1fb/1fb5bde77ea84f13fe8db7dedda5b8a29671b939/.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: add a special Xtensa version

Currently, the Xtensa architecture uses the "snapshot" version of
uClibc. This means that the build is not reproducible, since it will
pick whatever latest version of uClibc is available at the moment of
the build.

This commit replaces that by adding a special Xtensa version, which
points to a well-known Git commit. This is something we should
hopefully be able to remove once the uClibc people realize that doing
a 0.9.34 release would be useful.

Should probably fix:

  http://autobuild.buildroot.org/results/5d6/5d6072a038acf894d832704e36c1d43f0254abf5/build-end.log

at least I wasn't able to reproduce the build problem.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[baruch: use a more recent uClibc version]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

grub: really disable splash screen support

When BR2_TARGET_GRUB_SPLASH is enabled, we were passing
--enable-graphics, but when it was disabled, we were not doing
anything. However, in Grub, graphics support is enabled by default,
and you have to pass --disable-graphics to disable it.

Fix this by passing --enable-graphics or --disable-graphics as
appropriate.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: select ISO9660 support in Grub

The fs/iso9660 logic assumes that the Grub bootloader is
used. Therefore, it should make sure that Grub is configured with the
support for the ISO9660 filesystem.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

grub: replace string option for filesystem selection by booleans

In 1cece2813bf635ae29e9a8287322439b9c5992f7 (grub: add option to
configure the list of supported filesystems), we introduced the
BR2_TARGET_GRUB_FS_SUPPORT option which allows to provide a
space-separated list of filesystems that Grub should support.

However, it turns out that this not very practical, because the
iso9660 filesystem logic in Buildroot should force the ISO9660 support
to be enabled in Grub, which is not easy to do with a string option.

Therefore, this patch changes this option from a string option to a
list of boolean option, one per filesystem supported.

A few useful details:

 - Since Grub legacy is dead, the list of filesystem, and therefore
   the number of options, will not grow.

 - We have only added options for filesystems that are likely to be
   used in an embedded Linux context. Filesystems such as VSTAfs,
   Minix, UFS2 or FFS2 are not supported.

 - There is no need to add some Config.in.legacy support for the
   previous option, since it was added after Buildroot 2013.11, and
   was therefore never part of an official Buildroot release.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

grub: enclose network driver options in a sub-menu

In preparation to a change to the configuration options of the
supported filesystem in Grub, enclose the network driver options in a
sub-menu.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

fs/iso9660: put the Buildroot boot entry first in Grub menu.lst

The ISO9660-specific Grub menu.lst contains two entries: one entry to
chainload the bootloader available in the first hard drive, and
another entry to boot the Buildroot system.

However, it defaults to booting the first entry, i.e chainloading
what's on the first hard drive. For a Buildroot generated system, this
is quite odd: we're not even booting the system built by Buildroot.

So, switch the two entries, and put the Buildroot boot entry first.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

graphs: support generating png graphs

PDF files can not be easily embedded in other documents (eg. ODT, or HTML).

Add support for generating PNG graphs, by setting the GRAPH_OUT=pdf|png on
the command line:
    make GRAPH_OUT=png graph-build graph-depends

The default is still to generate PDF graphs.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: expose 'graph-depends' to generate a graph of the dependency tree

Generate the graph of the complete dependency tree by calling:
    make graph-depends

It's also possible to generate the graph-depends for a single package:
    make PKG-graph-depends

The graphs are generated in $(O)/graphs/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: expose target 'graph-build' to generate the build-time graphs

Generate the build-time graphs by calling:
    make graph-build

This generates the graphs in $(O)/graphs/

It is possible to use the alternate color-scheme by setting the variable
GRAPH_ALT=1 on the command line:
    make GRAPH_ALT=1 graph-build

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

graph-build-time: generate graphs based on timing data

This script generates graphs of packages build time, from the timing
data generated by Buildroot in the $(O)/build-time.log file.

Example usage:

  ./support/scripts/graph-build-time \
      --type=histogram --input=$(O)/build-time.log --output=foobar.pdf

Three graph types are available :

  * histogram, which creates an histogram of the build time for each
    package, decomposed by each step (extract, patch, configure,
    etc.). The order in which the packages are shown is
    configurable: by package name, by build order, or by duration
    order. See the --order option.

  * pie-packages, which creates a pie chart of the build time of
    each package (without decomposition in steps). Packages that
    contributed to less than 1% of the overall build time are all
    grouped together in an "Other" entry.

  * pie-steps, which creates a pie chart of the time spent globally
    on each step (extract, patch, configure, etc...)

The default is to generate an histogram ordered by package name.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr: adapt to the format of the step-hooks build-time.log,
    add sort order by name, default to name-ordered histogram, use our colours
    for pie-charts, add alternate color-scheme, add short-options, add
    --input/-i]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xenomai: enable armv5tej support

The br-arm-full-2013.11-rc2 toolchain is builded with arch=armv5te
and tune=arm926ej-s, which is not recognized by xenomai.

fixes: http://autobuild.buildroot.net/results/e3b/e3b534dafb6dd7d788b0c3629ccc0b25702790f0/build-end.log

This patch has already been merged upstream:

http://git.xenomai.org/xenomai-2.6.git/commit/?id=ebc2779baa222db4a5936c3d3022803355585b8c

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xenomai: bump to version 2.6.3

Add --disable-doc-install to configure script.

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

avrdude: add missing dependencies on host-flex and host-bison

Fixes:

  http://autobuild.buildroot.org/results/374/374608a852e66b89d02bbee1199a8dc9817d3aa0/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fswebcam: new package

[Thomas:
 - use the autotools-package infrastructure, since the package uses an
   autoconf configure script.
 - remove uninstall and clean commands since those are no longer
   supported by Buildroot.
 - rewrap the help text.
 - order alphabetically the package in package/Config.in]

Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

avrdude: new package

[Thomas:
 - remove empty newline at the end of Config.in
 - use lowercase for the package name in the comment header
 - reword the comment explaining why autoreconf is needed
 - add optional dependency on libftdi, which avrdude can use
 - remove avrdude.conf.bak file from /etc]

Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/kconfig: Fix remaining 'kernel' mention

This patch update the patch for kernel's kconfig to add remaining
'kernel' mention.
It also applies this patch to buildroot's kconfig.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/kconfig: Update kconfig to 3.13-rc5

Only minor changes are registered, mainly help text.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

logrotate: bump to version 3.8.7

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libevdev: fix minor typo

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libevdev: add dependency on host-python

libevdev needs python to generate a header file. We can't rely on the
1system pPython, since it may be too old (missing argparse in python
2.6).

Fixes:
    http://autobuild.buildroot.net/results/1f5c0689ae129ae5fa30f31a4f47ccbd7705ff00/
    http://autobuild.buildroot.net/results/1729043d9c977a59a4fdd7ccd3d16cfc8aef7678/
    http://autobuild.buildroot.net/results/3ab080e96576e0012fea853009811247338e665e/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: deprecate some more development tools

Since some time, we have removed the support to build a toolchain for
the target, and therefore the support for several development tools on
the target.

This commit deprecates a few additional development tools: m4, bison,
flex and gob2. For flex, we retain the ability to build libfl, we only
deprecated the ability to build the flex binary itself.

The original motivation for this patch is that m4 is causing build
issues in some configurations, but there isn't really much incentive
to fix this package for the target, since it is not really useful for
embedded Linux systems.

Bison, Flex and Gob2 are deprecated because they are reverse
dependencies of m4.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

Add Armadeus systems APF51 SOM basic support.

Buildroot uClibc toolchain, UBIFS rootfs, Linux kernel (board is mainlined).

Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5: disable on avr32

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5base: restore posix_fallocate() patch

It was removed in e4a839277f7d74104e25fb4fd846f9c2bf3f9c1e.

Fixes: http://autobuild.buildroot.net/results/a24/a249b0cd5b20a2c3eee34b585cd58d4a03a9338e/
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

snmppp: fix legal informations after version bump

Fixes:

  http://autobuild.buildroot.org/results/e64/e64c3edcb00132620b07ad815c6e4d33b70c262f/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5webkit: add upstream patch to fix build on ARM softfp

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imagemagick: bump to version 6.8.8-0

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cryptsetup: bump to version 1.6.3

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

snmppp: bump to version 3.3.2

Changes snmp++v3.3.2

====================

- Fixed: Regression through [APP-19] which lead to too long timeouts
  on systems with clock_gettime.
- Fixed: Restored missing files (CHANGES, READMEs) to distribution.
- Fixed: Fixed compilation error when using poll syscall.
- Fixed: Do not use _vscprintf as it is not portable, instead just
  truncate the log message.
- Fixed: Fixed test that produced an error during configure:
  checking which _XOPEN_SOURCE macro must be defined...
  ./configure: line 6229: test: : integer expression expected
- Fixed: msec.cpp: timezone is a struct and not a class.

Changes snmp++v3.3.1
====================

- Fixed: Replaced strcasecmp usage in consoleExamples by _stricmp
  for WIN32 platform.
- Improved: Debug output buffer length is now computed exactly on
  WIN32.
- Fixed: Compilation of IPv6Utility.h with Visual Studio 2013.
- Fixed: Removed #define of Uint32 in eventlistholder.h.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

c-ares: new package

Add c-ares library from bug #6482.
Most of the credit goes to Gennady Proskurin <gpq@mail.ru>

[Thomas: fix comment explaining why we need autoreconf.]

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: ignore .config for defconfig

Currently, we do not include .config for all '%_defconfig' targets, but
we forgot to also exclude plain 'defconfig'.

Reported-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python: fix invalid library paths leaking into the build, and other improvements

This commit improves the cross-compilation patches we have on top of
Python, to fix the problem of host library paths leaking into the
build of target modules, as seen at:

 http://autobuild.buildroot.org/results/fcc/fccd7e08cd9d4713eb4208097dd48c5ab25749bc/build-end.log
 http://autobuild.buildroot.org/results/0bd/0bda780bf4b759b12edec26ac20b88cde617db4d/build-end.log

To do so, it ensures that the right python2.7/config/Makefile is used
when building target modules, and adjusts at runtime the paths read
from this Makefile if we are cross-compiling.

In addition, it installs the pgen program into the host directory, and
points the target python build to use python and pgen from $(HOST_DIR)
instead of from the host python source directory, which looks cleaner.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: fix alphabetical ordering after libevdev addition

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libevdev: new package

[Thomas: fix license details, improve comment explaining why
 autoreconf is needed.]

Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch: pass cpu option instead of tune option on ARM

Currently, the ARM Config.in logic specifies values for
--with-arch/-march and --with-tune/-mtune, but not for
--with-cpu/-mcpu. However, this causes problems on ARMv4, because
specifying --with-arch=armv4t isn't enough to make gcc generate ARMv4
code: one should also pass --with-cpu=<some ARMv4 CPU>.

Moreover, since Buildroot is generally designed to generate code
specifically for the configured target, it makes sense to give our own
--with-cpu/-mcpu value instead of relying on the default value used by
gcc, and only do small optimizations with -mtune.

Reported-by: Adam Hussein <kryme76@yahoo.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

bluez_utils: broken for static builds

The bluez_utils package requires shared library support unconditionally.
We can't fix it to make it build on static because, for instance,
"plugin.c" file uses dlfcn and it's a basic prereq for bluetoothd, so
add "depend on !BR2_PREFER_STATIC_LIB" to it and recursively to all
packages that selects BR2_PACKAGE_BLUEZ_UTILS.

Fixes:

   http://autobuild.buildroot.net/results/d81/d81970024649c1e89c01da491c63760afdad6cb6/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

aiccu: disable for uClibc 0.9.31/0.9.32

aiccu uses the dn_skipname() function, which was only introduced in
uClibc 0.9.33. Therefore, we disable this package when uClibc 0.9.31
and 0.9.32. Most likely, only AVR32 users will be affected by this, so
we don't add a specific kconfig comment for that.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>

freetype: bump to version 2.5.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: add <PKG>_VERSION_MAJOR variable

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libmpd: change download URL

The old and new URLs are equivalent, but the new URL is not specific
to an older version of libmpd, which seems more logical.

[Thomas: update commit log.]

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tzdata/zic: bump to version 2013i

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cramfs: add licensing info

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>